microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/mips/kernel/cps-vec.S

496 строки
9.3 KiB
ArmAsm
Исходник Обычный вид История

MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
/*
* Copyright (C) 2013 Imagination Technologies
* Author: Paul Burton <paul.burton@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <asm/addrspace.h>
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/asmmacro.h>
#include <asm/cacheops.h>
MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores The CPS code is doing several memory loads when configuring the VPEs from secondary cores, so the segmentation control registers must be initialized in time otherwise the kernel will crash with strange TLB exceptions. Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/7424/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2014-07-21 17:35:56 +04:00
#include <asm/eva.h>
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
#include <asm/mipsregs.h>
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
#include <asm/mipsmtregs.h>
MIPS: pm-cps: add PM state entry code for CPS systems This patch adds code to generate entry & exit code for various low power states available on systems based around the MIPS Coherent Processing System architecture (ie. those with a Coherence Manager, Global Interrupt Controller & for >=CM2 a Cluster Power Controller). States supported are: - Non-coherent wait. This state first leaves the coherent domain and then executes a regular MIPS wait instruction. Power savings are found from the elimination of coherency interventions between the core and any other coherent requestors in the system. - Clock gated. This state leaves the coherent domain and then gates the clock input to the core. This removes all dynamic power from the core but leaves the core at the mercy of another to restart its clock. Register state is preserved, but the core can not service interrupts whilst its clock is gated. - Power gated. This deepest state removes all power input to the core. All register state is lost and the core will restart execution from its BEV when another core powers it back up. Because register state is lost this state requires cooperation with the CONFIG_MIPS_CPS SMP implementation in order for the core to exit the state successfully. The code will detect which states are available on the current system during boot & generate the entry/exit code for those states. This will be used by cpuidle & hotplug implementations. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 14:00:56 +04:00
#include <asm/pm.h>
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
#define GCR_CL_COHERENCE_OFS 0x2008
#define GCR_CL_ID_OFS 0x2028
.extern mips_cm_base
.set noreorder
/*
* Set dest to non-zero if the core supports the MT ASE, else zero. If
* MT is not supported then branch to nomt.
*/
.macro has_mt dest, nomt
mfc0 \dest, CP0_CONFIG
bgez \dest, \nomt
mfc0 \dest, CP0_CONFIG, 1
bgez \dest, \nomt
mfc0 \dest, CP0_CONFIG, 2
bgez \dest, \nomt
mfc0 \dest, CP0_CONFIG, 3
andi \dest, \dest, MIPS_CONF3_MT
beqz \dest, \nomt
MIPS: CPS: Stop dangling delay slot from has_mt. The has_mt macro ended with a branch, leaving its callers with a delay slot that would be executed if Config3.MT is not set. However it would not be executed if Config3 (or earlier Config registers) don't exist which makes it somewhat inconsistent at best. Fill the delay slot in the macro & fix the mips_cps_boot_vpes caller appropriately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:36 +03:00
nop
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
.endm
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
.section .text.cps-vec
.balign 0x1000
LEAF(mips_cps_core_entry)
/*
MIPS: smp-cps: duplicate core0 CCA on secondary cores Rather than hardcoding CCA=0x5 for secondary cores, re-use the CCA from the boot CPU. This allows overrides of the CCA using the cca= kernel parameter to take effect on all CPUs for consistency. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-16 14:10:57 +04:00
* These first 12 bytes will be patched by cps_smp_setup to load the
* base address of the CM GCRs into register v1 and the CCA to use into
* register s0.
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
*/
.quad 0
MIPS: smp-cps: duplicate core0 CCA on secondary cores Rather than hardcoding CCA=0x5 for secondary cores, re-use the CCA from the boot CPU. This allows overrides of the CCA using the cca= kernel parameter to take effect on all CPUs for consistency. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-16 14:10:57 +04:00
.word 0
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
/* Check whether we're here due to an NMI */
mfc0 k0, CP0_STATUS
and k0, k0, ST0_NMI
beqz k0, not_nmi
nop
/* This is an NMI */
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA k0, nmi_handler
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
jr k0
nop
not_nmi:
/* Setup Cause */
li t0, CAUSEF_IV
mtc0 t0, CP0_CAUSE
/* Setup Status */
MIPS: CPS: Set Status.BEV bit during early boot Set the Status.BEV bit throughout the early startup of a secondary core such that if an exception occurs the core branches to one of the exception vector entries from cps-vec.S, rather than branching to whatever is set in EBase. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11200/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-22 21:12:09 +03:00
li t0, ST0_CU1 | ST0_CU0 | ST0_BEV
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
mtc0 t0, CP0_STATUS
/*
* Clear the bits used to index the caches. Note that the architecture
* dictates that writing to any of TagLo or TagHi selects 0 or 2 should
* be valid for all MIPS32 CPUs, even those for which said writes are
* unnecessary.
*/
mtc0 zero, CP0_TAGLO, 0
mtc0 zero, CP0_TAGHI, 0
mtc0 zero, CP0_TAGLO, 2
mtc0 zero, CP0_TAGHI, 2
ehb
/* Primary cache configuration is indicated by Config1 */
mfc0 v0, CP0_CONFIG, 1
/* Detect I-cache line size */
_EXT t0, v0, MIPS_CONF1_IL_SHF, MIPS_CONF1_IL_SZ
beqz t0, icache_done
li t1, 2
sllv t0, t1, t0
/* Detect I-cache size */
_EXT t1, v0, MIPS_CONF1_IS_SHF, MIPS_CONF1_IS_SZ
xori t2, t1, 0x7
beqz t2, 1f
li t3, 32
MIPS: kernel: cps-vec: Replace "addi" with "addiu" The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-24 17:40:11 +03:00
addiu t1, t1, 1
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
sllv t1, t3, t1
1: /* At this point t1 == I-cache sets per way */
_EXT t2, v0, MIPS_CONF1_IA_SHF, MIPS_CONF1_IA_SZ
MIPS: kernel: cps-vec: Replace "addi" with "addiu" The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-24 17:40:11 +03:00
addiu t2, t2, 1
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
mul t1, t1, t0
mul t1, t1, t2
MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 In preparation for 64-bit CPS support, we replace KSEG0 with CKSEG0 so 64-bit kernels can be supported. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10590/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:32 +03:00
li a0, CKSEG0
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_ADD a1, a0, t1
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
1: cache Index_Store_Tag_I, 0(a0)
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_ADD a0, a0, t0
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
bne a0, a1, 1b
nop
icache_done:
/* Detect D-cache line size */
_EXT t0, v0, MIPS_CONF1_DL_SHF, MIPS_CONF1_DL_SZ
beqz t0, dcache_done
li t1, 2
sllv t0, t1, t0
/* Detect D-cache size */
_EXT t1, v0, MIPS_CONF1_DS_SHF, MIPS_CONF1_DS_SZ
xori t2, t1, 0x7
beqz t2, 1f
li t3, 32
MIPS: kernel: cps-vec: Replace "addi" with "addiu" The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-24 17:40:11 +03:00
addiu t1, t1, 1
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
sllv t1, t3, t1
1: /* At this point t1 == D-cache sets per way */
_EXT t2, v0, MIPS_CONF1_DA_SHF, MIPS_CONF1_DA_SZ
MIPS: kernel: cps-vec: Replace "addi" with "addiu" The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-24 17:40:11 +03:00
addiu t2, t2, 1
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
mul t1, t1, t0
mul t1, t1, t2
MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 In preparation for 64-bit CPS support, we replace KSEG0 with CKSEG0 so 64-bit kernels can be supported. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10590/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:32 +03:00
li a0, CKSEG0
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_ADDU a1, a0, t1
PTR_SUBU a1, a1, t0
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
1: cache Index_Store_Tag_D, 0(a0)
bne a0, a1, 1b
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_ADD a0, a0, t0
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
dcache_done:
MIPS: smp-cps: duplicate core0 CCA on secondary cores Rather than hardcoding CCA=0x5 for secondary cores, re-use the CCA from the boot CPU. This allows overrides of the CCA using the cca= kernel parameter to take effect on all CPUs for consistency. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-16 14:10:57 +04:00
/* Set Kseg0 CCA to that in s0 */
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
mfc0 t0, CP0_CONFIG
ori t0, 0x7
MIPS: smp-cps: duplicate core0 CCA on secondary cores Rather than hardcoding CCA=0x5 for secondary cores, re-use the CCA from the boot CPU. This allows overrides of the CCA using the cca= kernel parameter to take effect on all CPUs for consistency. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-16 14:10:57 +04:00
xori t0, 0x7
or t0, t0, s0
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
mtc0 t0, CP0_CONFIG
ehb
/* Enter the coherent domain */
li t0, 0xff
MIPS: CPS: use 32b accesses to GCRs Commit b677bc03d757 ("MIPS: cps-vec: Use macros for various arithmetics and memory operations") replaced various load & store instructions through cps-vec.S with the PTR_L & PTR_S macros. However it was somewhat overzealous in doing so for CM GCR accesses, since the bit width of the CM doesn't necessarily match that of the CPU. The registers accessed (GCR_CL_COHERENCE & GCR_CL_ID) should be safe to simply always access using 32b instructions, so do so in order to avoid issues when using a 32b CM with a 64b CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10864/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:35 +03:00
sw t0, GCR_CL_COHERENCE_OFS(v1)
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
ehb
/* Jump to kseg0 */
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA t0, 1f
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
jr t0
nop
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/*
* We're up, cached & coherent. Perform any further required core-level
* initialisation.
*/
1: jal mips_cps_core_init
nop
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores The CPS code is doing several memory loads when configuring the VPEs from secondary cores, so the segmentation control registers must be initialized in time otherwise the kernel will crash with strange TLB exceptions. Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/7424/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2014-07-21 17:35:56 +04:00
/* Do any EVA initialization if necessary */
eva_init
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
/*
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
* Boot any other VPEs within this core that should be online, and
* deactivate this VPE if it should be offline.
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
*/
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
jal mips_cps_boot_vpes
nop
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
/* Off we go! */
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_L t1, VPEBOOTCFG_PC(v0)
PTR_L gp, VPEBOOTCFG_GP(v0)
PTR_L sp, VPEBOOTCFG_SP(v0)
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
jr t1
nop
END(mips_cps_core_entry)
.org 0x200
LEAF(excep_tlbfill)
b .
nop
END(excep_tlbfill)
.org 0x280
LEAF(excep_xtlbfill)
b .
nop
END(excep_xtlbfill)
.org 0x300
LEAF(excep_cache)
b .
nop
END(excep_cache)
.org 0x380
LEAF(excep_genex)
b .
nop
END(excep_genex)
.org 0x400
LEAF(excep_intex)
b .
nop
END(excep_intex)
.org 0x480
LEAF(excep_ejtag)
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA k0, ejtag_debug_handler
MIPS: Coherent Processing System SMP implementation This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 14:31:53 +04:00
jr k0
nop
END(excep_ejtag)
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
LEAF(mips_cps_core_init)
MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot vector if we're using MT for SMP. Thus switch the config symbol we ifdef against to CONFIG_MIPS_MT_SMP. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10867/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:38 +03:00
#ifdef CONFIG_MIPS_MT_SMP
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Check that the core implements the MT ASE */
has_mt t0, 3f
.set push
MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 mips32r2 is a subset of mips64r2, so we replace mips32r2 with mips64r2 in preparation for 64-bit CPS support. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10588/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:30 +03:00
.set mips64r2
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
.set mt
/* Only allow 1 TC per VPE to execute... */
dmt
/* ...and for the moment only 1 VPE */
dvpe
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA t1, 1f
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
jr.hb t1
nop
/* Enter VPE configuration state */
1: mfc0 t0, CP0_MVPCONTROL
ori t0, t0, MVPCONTROL_VPC
mtc0 t0, CP0_MVPCONTROL
/* Retrieve the number of VPEs within the core */
mfc0 t0, CP0_MVPCONF0
srl t0, t0, MVPCONF0_PVPE_SHIFT
andi t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT)
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
addiu ta3, t0, 1
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* If there's only 1, we're done */
beqz t0, 2f
nop
/* Loop through each VPE within this core */
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
li ta1, 1
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
1: /* Operate on the appropriate TC */
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
mtc0 ta1, CP0_VPECONTROL
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
ehb
/* Bind TC to VPE (1:1 TC:VPE mapping) */
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
mttc0 ta1, CP0_TCBIND
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Set exclusive TC, non-active, master */
li t0, VPECONF0_MVP
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
sll t1, ta1, VPECONF0_XTC_SHIFT
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
or t0, t0, t1
mttc0 t0, CP0_VPECONF0
/* Set TC non-active, non-allocatable */
mttc0 zero, CP0_TCSTATUS
/* Set TC halted */
li t0, TCHALT_H
mttc0 t0, CP0_TCHALT
/* Next VPE */
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
addiu ta1, ta1, 1
slt t0, ta1, ta3
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
bnez t0, 1b
nop
/* Leave VPE configuration state */
2: mfc0 t0, CP0_MVPCONTROL
xori t0, t0, MVPCONTROL_VPC
mtc0 t0, CP0_MVPCONTROL
3: .set pop
#endif
jr ra
nop
END(mips_cps_core_init)
LEAF(mips_cps_boot_vpes)
/* Retrieve CM base address */
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA t0, mips_cm_base
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_L t0, 0(t0)
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Calculate a pointer to this cores struct core_boot_config */
MIPS: CPS: use 32b accesses to GCRs Commit b677bc03d757 ("MIPS: cps-vec: Use macros for various arithmetics and memory operations") replaced various load & store instructions through cps-vec.S with the PTR_L & PTR_S macros. However it was somewhat overzealous in doing so for CM GCR accesses, since the bit width of the CM doesn't necessarily match that of the CPU. The registers accessed (GCR_CL_COHERENCE & GCR_CL_ID) should be safe to simply always access using 32b instructions, so do so in order to avoid issues when using a 32b CM with a 64b CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10864/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:35 +03:00
lw t0, GCR_CL_ID_OFS(t0)
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
li t1, COREBOOTCFG_SIZE
mul t0, t0, t1
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA t1, mips_cps_core_bootcfg
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_L t1, 0(t1)
PTR_ADDU t0, t0, t1
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
MIPS: CPS: Stop dangling delay slot from has_mt. The has_mt macro ended with a branch, leaving its callers with a delay slot that would be executed if Config3.MT is not set. However it would not be executed if Config3 (or earlier Config registers) don't exist which makes it somewhat inconsistent at best. Fill the delay slot in the macro & fix the mips_cps_boot_vpes caller appropriately. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10865/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:36 +03:00
li t9, 0
MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot vector if we're using MT for SMP. Thus switch the config symbol we ifdef against to CONFIG_MIPS_MT_SMP. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10867/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:38 +03:00
#ifdef CONFIG_MIPS_MT_SMP
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
has_mt ta2, 1f
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Find the number of VPEs present in the core */
mfc0 t1, CP0_MVPCONF0
srl t1, t1, MVPCONF0_PVPE_SHIFT
andi t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT
MIPS: kernel: cps-vec: Replace "addi" with "addiu" The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-11-24 17:40:11 +03:00
addiu t1, t1, 1
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Calculate a mask for the VPE ID from EBase.CPUNum */
clz t1, t1
li t2, 31
subu t1, t2, t1
li t2, 1
sll t1, t2, t1
addiu t1, t1, -1
/* Retrieve the VPE ID from EBase.CPUNum */
mfc0 t9, $15, 1
and t9, t9, t1
MIPS: CPS: Don't include MT code in non-MT kernels. The MT-specific code in mips_cps_boot_vpes can safely be omitted from kernels which don't support MT, with the default VPE==0 case being used as it would be after the has_mt (Config3.MT) check failed at runtime. Discarding the code entirely will save us a few bytes & allow cleaner handling of MT ASE instructions by later patches. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:37 +03:00
#endif
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
1: /* Calculate a pointer to this VPEs struct vpe_boot_config */
li t1, VPEBOOTCFG_SIZE
mul v0, t9, t1
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_L ta3, COREBOOTCFG_VPECONFIG(t0)
PTR_ADDU v0, v0, ta3
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot vector if we're using MT for SMP. Thus switch the config symbol we ifdef against to CONFIG_MIPS_MT_SMP. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10867/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:38 +03:00
#ifdef CONFIG_MIPS_MT_SMP
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* If the core doesn't support MT then return */
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
bnez ta2, 1f
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
nop
jr ra
nop
.set push
MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 mips32r2 is a subset of mips64r2, so we replace mips32r2 with mips64r2 in preparation for 64-bit CPS support. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10588/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:30 +03:00
.set mips64r2
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
.set mt
1: /* Enter VPE configuration state */
dvpe
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA t1, 1f
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
jr.hb t1
nop
1: mfc0 t1, CP0_MVPCONTROL
ori t1, t1, MVPCONTROL_VPC
mtc0 t1, CP0_MVPCONTROL
ehb
/* Loop through each VPE */
MIPS: cps-vec: Use macros for various arithmetics and memory operations Replace lw/sw and various arithmetic instructions with macros so the code can work on 64-bit kernels as well. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:33 +03:00
PTR_L ta2, COREBOOTCFG_VPEMASK(t0)
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
move t8, ta2
li ta1, 0
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Check whether the VPE should be running. If not, skip it */
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
1: andi t0, ta2, 1
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
beqz t0, 2f
nop
/* Operate on the appropriate TC */
mfc0 t0, CP0_VPECONTROL
ori t0, t0, VPECONTROL_TARGTC
xori t0, t0, VPECONTROL_TARGTC
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
or t0, t0, ta1
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
mtc0 t0, CP0_VPECONTROL
ehb
/* Skip the VPE if its TC is not halted */
mftc0 t0, CP0_TCHALT
beqz t0, 2f
nop
/* Calculate a pointer to the VPEs struct vpe_boot_config */
li t0, VPEBOOTCFG_SIZE
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
mul t0, t0, ta1
addu t0, t0, ta3
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Set the TC restart PC */
lw t1, VPEBOOTCFG_PC(t0)
mttc0 t1, CP0_TCRESTART
/* Set the TC stack pointer */
lw t1, VPEBOOTCFG_SP(t0)
mttgpr t1, sp
/* Set the TC global pointer */
lw t1, VPEBOOTCFG_GP(t0)
mttgpr t1, gp
/* Copy config from this VPE */
mfc0 t0, CP0_CONFIG
mttc0 t0, CP0_CONFIG
/* Ensure no software interrupts are pending */
mttc0 zero, CP0_CAUSE
mttc0 zero, CP0_STATUS
/* Set TC active, not interrupt exempt */
mftc0 t0, CP0_TCSTATUS
li t1, ~TCSTATUS_IXMT
and t0, t0, t1
ori t0, t0, TCSTATUS_A
mttc0 t0, CP0_TCSTATUS
/* Clear the TC halt bit */
mttc0 zero, CP0_TCHALT
/* Set VPE active */
mftc0 t0, CP0_VPECONF0
ori t0, t0, VPECONF0_VPA
mttc0 t0, CP0_VPECONF0
/* Next VPE */
MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit The cps-vec code assumes O32 ABI and uses t4-t7 in quite a few places. This breaks the build on 64-bit. As a result of which, use the pseudo-registers ta0-ta3 to make the code compatible with 64-bit. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:31 +03:00
2: srl ta2, ta2, 1
addiu ta1, ta1, 1
bnez ta2, 1b
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
nop
/* Leave VPE configuration state */
mfc0 t1, CP0_MVPCONTROL
xori t1, t1, MVPCONTROL_VPC
mtc0 t1, CP0_MVPCONTROL
ehb
evpe
/* Check whether this VPE is meant to be running */
li t0, 1
sll t0, t0, t9
and t0, t0, t8
bnez t0, 2f
nop
/* This VPE should be offline, halt the TC */
li t0, TCHALT_H
mtc0 t0, CP0_TCHALT
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA t0, 1f
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
1: jr.hb t0
nop
2: .set pop
MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot vector if we're using MT for SMP. Thus switch the config symbol we ifdef against to CONFIG_MIPS_MT_SMP. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: <stable@vger.kernel.org> # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10867/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-06 01:42:38 +03:00
#endif /* CONFIG_MIPS_MT_SMP */
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
/* Return */
jr ra
nop
END(mips_cps_boot_vpes)
MIPS: pm-cps: add PM state entry code for CPS systems This patch adds code to generate entry & exit code for various low power states available on systems based around the MIPS Coherent Processing System architecture (ie. those with a Coherence Manager, Global Interrupt Controller & for >=CM2 a Cluster Power Controller). States supported are: - Non-coherent wait. This state first leaves the coherent domain and then executes a regular MIPS wait instruction. Power savings are found from the elimination of coherency interventions between the core and any other coherent requestors in the system. - Clock gated. This state leaves the coherent domain and then gates the clock input to the core. This removes all dynamic power from the core but leaves the core at the mercy of another to restart its clock. Register state is preserved, but the core can not service interrupts whilst its clock is gated. - Power gated. This deepest state removes all power input to the core. All register state is lost and the core will restart execution from its BEV when another core powers it back up. Because register state is lost this state requires cooperation with the CONFIG_MIPS_CPS SMP implementation in order for the core to exit the state successfully. The code will detect which states are available on the current system during boot & generate the entry/exit code for those states. This will be used by cpuidle & hotplug implementations. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 14:00:56 +04:00
#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
/* Calculate a pointer to this CPUs struct mips_static_suspend_state */
.macro psstate dest
.set push
.set noat
lw $1, TI_CPU(gp)
sll $1, $1, LONGLOG
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA \dest, __per_cpu_offset
MIPS: pm-cps: add PM state entry code for CPS systems This patch adds code to generate entry & exit code for various low power states available on systems based around the MIPS Coherent Processing System architecture (ie. those with a Coherence Manager, Global Interrupt Controller & for >=CM2 a Cluster Power Controller). States supported are: - Non-coherent wait. This state first leaves the coherent domain and then executes a regular MIPS wait instruction. Power savings are found from the elimination of coherency interventions between the core and any other coherent requestors in the system. - Clock gated. This state leaves the coherent domain and then gates the clock input to the core. This removes all dynamic power from the core but leaves the core at the mercy of another to restart its clock. Register state is preserved, but the core can not service interrupts whilst its clock is gated. - Power gated. This deepest state removes all power input to the core. All register state is lost and the core will restart execution from its BEV when another core powers it back up. Because register state is lost this state requires cooperation with the CONFIG_MIPS_CPS SMP implementation in order for the core to exit the state successfully. The code will detect which states are available on the current system during boot & generate the entry/exit code for those states. This will be used by cpuidle & hotplug implementations. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 14:00:56 +04:00
addu $1, $1, \dest
lw $1, 0($1)
MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA The PTR_LA macro will pick the correct "la" or "dla" macro to load an address to a register. This gets rids of the following warnings (and others) when building a 64-bit CPS kernel: arch/mips/kernel/cps-vec.S:63: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:159: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:220: Warning: la used to load 64-bit address arch/mips/kernel/cps-vec.S:240: Warning: la used to load 64-bit address [...] Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-01 11:13:29 +03:00
PTR_LA \dest, cps_cpu_state
MIPS: pm-cps: add PM state entry code for CPS systems This patch adds code to generate entry & exit code for various low power states available on systems based around the MIPS Coherent Processing System architecture (ie. those with a Coherence Manager, Global Interrupt Controller & for >=CM2 a Cluster Power Controller). States supported are: - Non-coherent wait. This state first leaves the coherent domain and then executes a regular MIPS wait instruction. Power savings are found from the elimination of coherency interventions between the core and any other coherent requestors in the system. - Clock gated. This state leaves the coherent domain and then gates the clock input to the core. This removes all dynamic power from the core but leaves the core at the mercy of another to restart its clock. Register state is preserved, but the core can not service interrupts whilst its clock is gated. - Power gated. This deepest state removes all power input to the core. All register state is lost and the core will restart execution from its BEV when another core powers it back up. Because register state is lost this state requires cooperation with the CONFIG_MIPS_CPS SMP implementation in order for the core to exit the state successfully. The code will detect which states are available on the current system during boot & generate the entry/exit code for those states. This will be used by cpuidle & hotplug implementations. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 14:00:56 +04:00
addu \dest, \dest, $1
.set pop
.endm
LEAF(mips_cps_pm_save)
/* Save CPU state */
SUSPEND_SAVE_REGS
psstate t1
SUSPEND_SAVE_STATIC
jr v0
nop
END(mips_cps_pm_save)
LEAF(mips_cps_pm_restore)
/* Restore CPU state */
psstate t1
RESUME_RESTORE_STATIC
RESUME_RESTORE_REGS_RETURN
END(mips_cps_pm_restore)
#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */