microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/include/linux/pci-aspm.h

66 строки
1.7 KiB
C
Исходник Обычный вид История

PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 04:46:41 +03:00
/*
* aspm.h
*
* PCI Express ASPM defines and function prototypes
*
* Copyright (C) 2007 Intel Corp.
* Zhang Yanmin (yanmin.zhang@intel.com)
* Shaohua Li (shaohua.li@intel.com)
*
* For more information, please consult the following manuals (look at
* http://www.pcisig.com/ for how to get them):
*
* PCI Express Specification
*/
#ifndef LINUX_ASPM_H
#define LINUX_ASPM_H
#include <linux/pci.h>
#define PCIE_LINK_STATE_L0S 1
#define PCIE_LINK_STATE_L1 2
#define PCIE_LINK_STATE_CLKPM 4
#ifdef CONFIG_PCIEASPM
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 22:02:59 +04:00
void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
void pcie_aspm_pm_state_change(struct pci_dev *pdev);
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
void pci_disable_link_state(struct pci_dev *pdev, int state);
void pci_disable_link_state_locked(struct pci_dev *pdev, int state);
void pcie_no_aspm(void);
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 04:46:41 +03:00
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev)
{
}
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev)
{
}
static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev)
{
}
PCI: PCIe links may not get configured for ASPM under POWERSAVE mode v3 -> v2: Moved ASPM enabling logic to pci_set_power_state() v2 -> v1: Preserved the logic in pci_raw_set_power_state() : Added ASPM enabling logic after scanning Root Bridge : http://marc.info/?l=linux-pci&m=130046996216391&w=2 v1 : http://marc.info/?l=linux-pci&m=130013164703283&w=2 The assumption made in commit 41cd766b065970ff6f6c89dd1cf55fa706c84a3d (PCI: Don't enable aspm before drivers have had a chance to veto it) that pci_enable_device() will result in re-configuring ASPM when aspm_policy is POWERSAVE is no longer valid. This is due to commit 97c145f7c87453cec90e91238fba5fe2c1561b32 (PCI: read current power state at enable time) which resets dev->current_state to D0. Due to this the call to pcie_aspm_pm_state_change() is never made. Note the equality check (below) that returns early: ./drivers/pci/pci.c: pci_raw_set_pci_power_state() 546 /* Check if we're already there */ 547 if (dev->current_state == state) 548 return 0; Therefore OSPM never configures the PCIe links for ASPM to turn them "on". Fix it by configuring ASPM from the pci_enable_device() code path. This also allows a driver such as the e1000e networking driver a chance to disable ASPM (L0s, L1), if need be, prior to enabling the device. A driver may perform this action if the device is known to mis-behave wrt ASPM. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21 06:29:08 +03:00
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
{
}
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 04:46:41 +03:00
static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
{
}
PCI: disable ASPM per ACPI FADT setting The ACPI FADT table includes an ASPM control bit. If the bit is set, do not enable ASPM since it may indicate that the platform doesn't actually support the feature. Tested-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-23 06:32:24 +04:00
static inline void pcie_no_aspm(void)
{
}
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 04:46:41 +03:00
#endif
#ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */
PCI: Remove "extern" from function declarations We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-12 22:02:59 +04:00
void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 04:46:41 +03:00
#else
static inline void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
{
}
static inline void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
{
}
#endif
#endif /* LINUX_ASPM_H */