WSL2-Linux-Kernel/fs/nfsd/nfsfh.c

694 строки
18 KiB
C
Исходник Обычный вид История

/*
* NFS server file handle treatment.
*
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
* Portions Copyright (C) 1999 G. Allen Morris III <gam3@acm.org>
* Extensive rewrite by Neil Brown <neilb@cse.unsw.edu.au> Southern-Spring 1999
* ... and again Southern-Winter 2001 to support export_operations
*/
#include <linux/exportfs.h>
#include <linux/sunrpc/svcauth_gss.h>
#include "nfsd.h"
#include "vfs.h"
#include "auth.h"
#define NFSDDBG_FACILITY NFSDDBG_FH
/*
* our acceptability function.
* if NOSUBTREECHECK, accept anything
* if not, require that we can walk up to exp->ex_dentry
* doing some checks on the 'x' bits
*/
static int nfsd_acceptable(void *expv, struct dentry *dentry)
{
struct svc_export *exp = expv;
int rv;
struct dentry *tdentry;
struct dentry *parent;
if (exp->ex_flags & NFSEXP_NOSUBTREECHECK)
return 1;
tdentry = dget(dentry);
while (tdentry != exp->ex_path.dentry && !IS_ROOT(tdentry)) {
/* make sure parents give x permission to user */
int err;
parent = dget_parent(tdentry);
err = inode_permission(parent->d_inode, MAY_EXEC);
if (err < 0) {
dput(parent);
break;
}
dput(tdentry);
tdentry = parent;
}
if (tdentry != exp->ex_path.dentry)
dprintk("nfsd_acceptable failed at %p %s\n", tdentry, tdentry->d_name.name);
rv = (tdentry == exp->ex_path.dentry);
dput(tdentry);
return rv;
}
/* Type check. The correct error return for type mismatches does not seem to be
* generally agreed upon. SunOS seems to use EISDIR if file isn't S_IFREG; a
* comment in the NFSv3 spec says this is incorrect (implementation notes for
* the write call).
*/
static inline __be32
nfsd_mode_check(struct svc_rqst *rqstp, umode_t mode, int type)
{
/* Type can be negative when creating hardlinks - not to a dir */
if (type > 0 && (mode & S_IFMT) != type) {
if (rqstp->rq_vers == 4 && (mode & S_IFMT) == S_IFLNK)
return nfserr_symlink;
else if (type == S_IFDIR)
return nfserr_notdir;
else if ((mode & S_IFMT) == S_IFDIR)
return nfserr_isdir;
else
return nfserr_inval;
}
if (type < 0 && (mode & S_IFMT) == -type) {
if (rqstp->rq_vers == 4 && (mode & S_IFMT) == S_IFLNK)
return nfserr_symlink;
else if (type == -S_IFDIR)
return nfserr_isdir;
else
return nfserr_notdir;
}
return 0;
}
static __be32 nfsd_setuser_and_check_port(struct svc_rqst *rqstp,
struct svc_export *exp)
{
int flags = nfsexp_flags(rqstp, exp);
/* Check if the request originated from a secure port. */
if (!rqstp->rq_secure && !(flags & NFSEXP_INSECURE_PORT)) {
RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
dprintk(KERN_WARNING
"nfsd: request from insecure port %s!\n",
svc_print_addr(rqstp, buf, sizeof(buf)));
return nfserr_perm;
}
/* Set user creds for this exportpoint */
return nfserrno(nfsd_setuser(rqstp, exp));
}
static inline __be32 check_pseudo_root(struct svc_rqst *rqstp,
struct dentry *dentry, struct svc_export *exp)
{
if (!(exp->ex_flags & NFSEXP_V4ROOT))
return nfs_ok;
/*
* v2/v3 clients have no need for the V4ROOT export--they use
* the mount protocl instead; also, further V4ROOT checks may be
* in v4-specific code, in which case v2/v3 clients could bypass
* them.
*/
if (!nfsd_v4client(rqstp))
return nfserr_stale;
/*
* We're exposing only the directories and symlinks that have to be
* traversed on the way to real exports:
*/
if (unlikely(!S_ISDIR(dentry->d_inode->i_mode) &&
!S_ISLNK(dentry->d_inode->i_mode)))
return nfserr_stale;
/*
* A pseudoroot export gives permission to access only one
* single directory; the kernel has to make another upcall
* before granting access to anything else under it:
*/
if (unlikely(dentry != exp->ex_path.dentry))
return nfserr_stale;
return nfs_ok;
}
/*
* Use the given filehandle to look up the corresponding export and
* dentry. On success, the results are used to set fh_export and
* fh_dentry.
*/
static __be32 nfsd_set_fh_dentry(struct svc_rqst *rqstp, struct svc_fh *fhp)
{
struct knfsd_fh *fh = &fhp->fh_handle;
struct fid *fid = NULL, sfid;
struct svc_export *exp;
struct dentry *dentry;
int fileid_type;
int data_left = fh->fh_size/4;
__be32 error;
error = nfserr_stale;
if (rqstp->rq_vers > 2)
error = nfserr_badhandle;
if (rqstp->rq_vers == 4 && fh->fh_size == 0)
return nfserr_nofilehandle;
if (fh->fh_version == 1) {
int len;
if (--data_left < 0)
return error;
if (fh->fh_auth_type != 0)
return error;
len = key_len(fh->fh_fsid_type) / 4;
if (len == 0)
return error;
if (fh->fh_fsid_type == FSID_MAJOR_MINOR) {
/* deprecated, convert to type 3 */
len = key_len(FSID_ENCODE_DEV)/4;
fh->fh_fsid_type = FSID_ENCODE_DEV;
fh->fh_fsid[0] = new_encode_dev(MKDEV(ntohl(fh->fh_fsid[0]), ntohl(fh->fh_fsid[1])));
fh->fh_fsid[1] = fh->fh_fsid[2];
}
data_left -= len;
if (data_left < 0)
return error;
exp = rqst_exp_find(rqstp, fh->fh_fsid_type, fh->fh_auth);
fid = (struct fid *)(fh->fh_auth + len);
} else {
__u32 tfh[2];
dev_t xdev;
ino_t xino;
if (fh->fh_size != NFS_FHSIZE)
return error;
/* assume old filehandle format */
xdev = old_decode_dev(fh->ofh_xdev);
xino = u32_to_ino_t(fh->ofh_xino);
mk_fsid(FSID_DEV, tfh, xdev, xino, 0, NULL);
exp = rqst_exp_find(rqstp, FSID_DEV, tfh);
}
error = nfserr_stale;
if (PTR_ERR(exp) == -ENOENT)
return error;
if (IS_ERR(exp))
return nfserrno(PTR_ERR(exp));
if (exp->ex_flags & NFSEXP_NOSUBTREECHECK) {
/* Elevate privileges so that the lack of 'r' or 'x'
* permission on some parent directory will
* not stop exportfs_decode_fh from being able
* to reconnect a directory into the dentry cache.
* The same problem can affect "SUBTREECHECK" exports,
* but as nfsd_acceptable depends on correct
* access control settings being in effect, we cannot
* fix that case easily.
*/
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 02:39:23 +03:00
struct cred *new = prepare_creds();
if (!new)
return nfserrno(-ENOMEM);
new->cap_effective =
cap_raise_nfsd_set(new->cap_effective,
new->cap_permitted);
put_cred(override_creds(new));
put_cred(new);
} else {
error = nfsd_setuser_and_check_port(rqstp, exp);
if (error)
goto out;
}
/*
* Look up the dentry using the NFS file handle.
*/
error = nfserr_stale;
if (rqstp->rq_vers > 2)
error = nfserr_badhandle;
if (fh->fh_version != 1) {
sfid.i32.ino = fh->ofh_ino;
sfid.i32.gen = fh->ofh_generation;
sfid.i32.parent_ino = fh->ofh_dirino;
fid = &sfid;
data_left = 3;
if (fh->ofh_dirino == 0)
fileid_type = FILEID_INO32_GEN;
else
fileid_type = FILEID_INO32_GEN_PARENT;
} else
fileid_type = fh->fh_fileid_type;
if (fileid_type == FILEID_ROOT)
dentry = dget(exp->ex_path.dentry);
else {
dentry = exportfs_decode_fh(exp->ex_path.mnt, fid,
data_left, fileid_type,
nfsd_acceptable, exp);
}
if (dentry == NULL)
goto out;
if (IS_ERR(dentry)) {
if (PTR_ERR(dentry) != -EINVAL)
error = nfserrno(PTR_ERR(dentry));
goto out;
}
if (S_ISDIR(dentry->d_inode->i_mode) &&
(dentry->d_flags & DCACHE_DISCONNECTED)) {
printk("nfsd: find_fh_dentry returned a DISCONNECTED directory: %s/%s\n",
dentry->d_parent->d_name.name, dentry->d_name.name);
}
fhp->fh_dentry = dentry;
fhp->fh_export = exp;
return 0;
out:
exp_put(exp);
return error;
}
/**
* fh_verify - filehandle lookup and access checking
* @rqstp: pointer to current rpc request
* @fhp: filehandle to be verified
* @type: expected type of object pointed to by filehandle
* @access: type of access needed to object
*
* Look up a dentry from the on-the-wire filehandle, check the client's
* access to the export, and set the current task's credentials.
*
* Regardless of success or failure of fh_verify(), fh_put() should be
* called on @fhp when the caller is finished with the filehandle.
*
* fh_verify() may be called multiple times on a given filehandle, for
* example, when processing an NFSv4 compound. The first call will look
* up a dentry using the on-the-wire filehandle. Subsequent calls will
* skip the lookup and just perform the other checks and possibly change
* the current task's credentials.
*
* @type specifies the type of object expected using one of the S_IF*
* constants defined in include/linux/stat.h. The caller may use zero
* to indicate that it doesn't care, or a negative integer to indicate
* that it expects something not of the given type.
*
* @access is formed from the NFSD_MAY_* constants defined in
* include/linux/nfsd/nfsd.h.
*/
__be32
fh_verify(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, int access)
{
struct svc_export *exp;
struct dentry *dentry;
__be32 error;
dprintk("nfsd: fh_verify(%s)\n", SVCFH_fmt(fhp));
if (!fhp->fh_dentry) {
error = nfsd_set_fh_dentry(rqstp, fhp);
if (error)
goto out;
}
dentry = fhp->fh_dentry;
exp = fhp->fh_export;
/*
* We still have to do all these permission checks, even when
* fh_dentry is already set:
* - fh_verify may be called multiple times with different
* "access" arguments (e.g. nfsd_proc_create calls
* fh_verify(...,NFSD_MAY_EXEC) first, then later (in
* nfsd_create) calls fh_verify(...,NFSD_MAY_CREATE).
* - in the NFSv4 case, the filehandle may have been filled
* in by fh_compose, and given a dentry, but further
* compound operations performed with that filehandle
* still need permissions checks. In the worst case, a
* mountpoint crossing may have changed the export
* options, and we may now need to use a different uid
* (for example, if different id-squashing options are in
* effect on the new filesystem).
*/
error = check_pseudo_root(rqstp, dentry, exp);
if (error)
goto out;
error = nfsd_setuser_and_check_port(rqstp, exp);
if (error)
goto out;
error = nfsd_mode_check(rqstp, dentry->d_inode->i_mode, type);
if (error)
goto out;
/*
* pseudoflavor restrictions are not enforced on NLM,
* which clients virtually always use auth_sys for,
* even while using RPCSEC_GSS for NFS.
*/
if (access & NFSD_MAY_LOCK || access & NFSD_MAY_BYPASS_GSS)
goto skip_pseudoflavor_check;
/*
* Clients may expect to be able to use auth_sys during mount,
* even if they use gss for everything else; see section 2.3.2
* of rfc 2623.
*/
if (access & NFSD_MAY_BYPASS_GSS_ON_ROOT
&& exp->ex_path.dentry == dentry)
goto skip_pseudoflavor_check;
error = check_nfsd_access(exp, rqstp);
if (error)
goto out;
skip_pseudoflavor_check:
/* Finally, check access permissions. */
error = nfsd_permission(rqstp, exp, dentry, access);
if (error) {
dprintk("fh_verify: %s/%s permission failure, "
"acc=%x, error=%d\n",
dentry->d_parent->d_name.name,
dentry->d_name.name,
access, ntohl(error));
}
out:
if (error == nfserr_stale)
nfsdstats.fh_stale++;
return error;
}
/*
* Compose a file handle for an NFS reply.
*
* Note that when first composed, the dentry may not yet have
* an inode. In this case a call to fh_update should be made
* before the fh goes out on the wire ...
*/
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 03:42:03 +04:00
static void _fh_update(struct svc_fh *fhp, struct svc_export *exp,
struct dentry *dentry)
{
if (dentry != exp->ex_path.dentry) {
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 03:42:03 +04:00
struct fid *fid = (struct fid *)
(fhp->fh_handle.fh_auth + fhp->fh_handle.fh_size/4 - 1);
int maxsize = (fhp->fh_maxsize - fhp->fh_handle.fh_size)/4;
int subtreecheck = !(exp->ex_flags & NFSEXP_NOSUBTREECHECK);
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 03:42:03 +04:00
fhp->fh_handle.fh_fileid_type =
exportfs_encode_fh(dentry, fid, &maxsize, subtreecheck);
fhp->fh_handle.fh_size += maxsize * 4;
} else {
fhp->fh_handle.fh_fileid_type = FILEID_ROOT;
}
}
/*
* for composing old style file handles
*/
static inline void _fh_update_old(struct dentry *dentry,
struct svc_export *exp,
struct knfsd_fh *fh)
{
fh->ofh_ino = ino_t_to_u32(dentry->d_inode->i_ino);
fh->ofh_generation = dentry->d_inode->i_generation;
if (S_ISDIR(dentry->d_inode->i_mode) ||
(exp->ex_flags & NFSEXP_NOSUBTREECHECK))
fh->ofh_dirino = 0;
}
static bool is_root_export(struct svc_export *exp)
{
return exp->ex_path.dentry == exp->ex_path.dentry->d_sb->s_root;
}
static struct super_block *exp_sb(struct svc_export *exp)
{
return exp->ex_path.dentry->d_inode->i_sb;
}
static bool fsid_type_ok_for_exp(u8 fsid_type, struct svc_export *exp)
{
switch (fsid_type) {
case FSID_DEV:
if (!old_valid_dev(exp_sb(exp)->s_dev))
return 0;
/* FALL THROUGH */
case FSID_MAJOR_MINOR:
case FSID_ENCODE_DEV:
return exp_sb(exp)->s_type->fs_flags & FS_REQUIRES_DEV;
case FSID_NUM:
return exp->ex_flags & NFSEXP_FSID;
case FSID_UUID8:
case FSID_UUID16:
if (!is_root_export(exp))
return 0;
/* fall through */
case FSID_UUID4_INUM:
case FSID_UUID16_INUM:
return exp->ex_uuid != NULL;
}
return 1;
}
static void set_version_and_fsid_type(struct svc_fh *fhp, struct svc_export *exp, struct svc_fh *ref_fh)
{
u8 version;
u8 fsid_type;
retry:
version = 1;
if (ref_fh && ref_fh->fh_export == exp) {
version = ref_fh->fh_handle.fh_version;
fsid_type = ref_fh->fh_handle.fh_fsid_type;
ref_fh = NULL;
switch (version) {
case 0xca:
fsid_type = FSID_DEV;
break;
case 1:
break;
default:
goto retry;
}
/*
* As the fsid -> filesystem mapping was guided by
* user-space, there is no guarantee that the filesystem
* actually supports that fsid type. If it doesn't we
* loop around again without ref_fh set.
*/
if (!fsid_type_ok_for_exp(fsid_type, exp))
goto retry;
} else if (exp->ex_flags & NFSEXP_FSID) {
fsid_type = FSID_NUM;
} else if (exp->ex_uuid) {
if (fhp->fh_maxsize >= 64) {
if (is_root_export(exp))
fsid_type = FSID_UUID16;
else
fsid_type = FSID_UUID16_INUM;
} else {
if (is_root_export(exp))
fsid_type = FSID_UUID8;
else
fsid_type = FSID_UUID4_INUM;
}
} else if (!old_valid_dev(exp_sb(exp)->s_dev))
/* for newer device numbers, we must use a newer fsid format */
fsid_type = FSID_ENCODE_DEV;
else
fsid_type = FSID_DEV;
fhp->fh_handle.fh_version = version;
if (version)
fhp->fh_handle.fh_fsid_type = fsid_type;
}
__be32
fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry,
struct svc_fh *ref_fh)
{
/* ref_fh is a reference file handle.
* if it is non-null and for the same filesystem, then we should compose
* a filehandle which is of the same version, where possible.
* Currently, that means that if ref_fh->fh_handle.fh_version == 0xca
* Then create a 32byte filehandle using nfs_fhbase_old
*
*/
struct inode * inode = dentry->d_inode;
struct dentry *parent = dentry->d_parent;
__u32 *datap;
dev_t ex_dev = exp_sb(exp)->s_dev;
dprintk("nfsd: fh_compose(exp %02x:%02x/%ld %s/%s, ino=%ld)\n",
MAJOR(ex_dev), MINOR(ex_dev),
(long) exp->ex_path.dentry->d_inode->i_ino,
parent->d_name.name, dentry->d_name.name,
(inode ? inode->i_ino : 0));
/* Choose filehandle version and fsid type based on
* the reference filehandle (if it is in the same export)
* or the export options.
*/
set_version_and_fsid_type(fhp, exp, ref_fh);
if (ref_fh == fhp)
fh_put(ref_fh);
if (fhp->fh_locked || fhp->fh_dentry) {
printk(KERN_ERR "fh_compose: fh %s/%s not initialized!\n",
parent->d_name.name, dentry->d_name.name);
}
if (fhp->fh_maxsize < NFS_FHSIZE)
printk(KERN_ERR "fh_compose: called with maxsize %d! %s/%s\n",
fhp->fh_maxsize,
parent->d_name.name, dentry->d_name.name);
fhp->fh_dentry = dget(dentry); /* our internal copy */
fhp->fh_export = exp;
cache_get(&exp->h);
if (fhp->fh_handle.fh_version == 0xca) {
/* old style filehandle please */
memset(&fhp->fh_handle.fh_base, 0, NFS_FHSIZE);
fhp->fh_handle.fh_size = NFS_FHSIZE;
fhp->fh_handle.ofh_dcookie = 0xfeebbaca;
fhp->fh_handle.ofh_dev = old_encode_dev(ex_dev);
fhp->fh_handle.ofh_xdev = fhp->fh_handle.ofh_dev;
fhp->fh_handle.ofh_xino =
ino_t_to_u32(exp->ex_path.dentry->d_inode->i_ino);
fhp->fh_handle.ofh_dirino = ino_t_to_u32(parent_ino(dentry));
if (inode)
_fh_update_old(dentry, exp, &fhp->fh_handle);
} else {
int len;
fhp->fh_handle.fh_auth_type = 0;
datap = fhp->fh_handle.fh_auth+0;
mk_fsid(fhp->fh_handle.fh_fsid_type, datap, ex_dev,
exp->ex_path.dentry->d_inode->i_ino,
exp->ex_fsid, exp->ex_uuid);
len = key_len(fhp->fh_handle.fh_fsid_type);
datap += len/4;
fhp->fh_handle.fh_size = 4 + len;
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 03:42:03 +04:00
if (inode)
_fh_update(fhp, exp, dentry);
if (fhp->fh_handle.fh_fileid_type == 255) {
fh_put(fhp);
return nfserr_opnotsupp;
}
}
return 0;
}
/*
* Update file handle information after changing a dentry.
* This is only called by nfsd_create, nfsd_create_v3 and nfsd_proc_create
*/
__be32
fh_update(struct svc_fh *fhp)
{
struct dentry *dentry;
if (!fhp->fh_dentry)
goto out_bad;
dentry = fhp->fh_dentry;
if (!dentry->d_inode)
goto out_negative;
if (fhp->fh_handle.fh_version != 1) {
_fh_update_old(dentry, fhp->fh_export, &fhp->fh_handle);
} else {
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 03:42:03 +04:00
if (fhp->fh_handle.fh_fileid_type != FILEID_ROOT)
goto out;
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 03:42:03 +04:00
_fh_update(fhp, fhp->fh_export, dentry);
if (fhp->fh_handle.fh_fileid_type == 255)
return nfserr_opnotsupp;
}
out:
return 0;
out_bad:
printk(KERN_ERR "fh_update: fh not verified!\n");
goto out;
out_negative:
printk(KERN_ERR "fh_update: %s/%s still negative!\n",
dentry->d_parent->d_name.name, dentry->d_name.name);
goto out;
}
/*
* Release a file handle.
*/
void
fh_put(struct svc_fh *fhp)
{
struct dentry * dentry = fhp->fh_dentry;
struct svc_export * exp = fhp->fh_export;
if (dentry) {
fh_unlock(fhp);
fhp->fh_dentry = NULL;
dput(dentry);
#ifdef CONFIG_NFSD_V3
fhp->fh_pre_saved = 0;
fhp->fh_post_saved = 0;
#endif
}
if (exp) {
cache_put(&exp->h, &svc_export_cache);
fhp->fh_export = NULL;
}
return;
}
/*
* Shorthand for dprintk()'s
*/
char * SVCFH_fmt(struct svc_fh *fhp)
{
struct knfsd_fh *fh = &fhp->fh_handle;
static char buf[80];
sprintf(buf, "%d: %08x %08x %08x %08x %08x %08x",
fh->fh_size,
fh->fh_base.fh_pad[0],
fh->fh_base.fh_pad[1],
fh->fh_base.fh_pad[2],
fh->fh_base.fh_pad[3],
fh->fh_base.fh_pad[4],
fh->fh_base.fh_pad[5]);
return buf;
}
enum fsid_source fsid_source(struct svc_fh *fhp)
{
if (fhp->fh_handle.fh_version != 1)
return FSIDSOURCE_DEV;
switch(fhp->fh_handle.fh_fsid_type) {
case FSID_DEV:
case FSID_ENCODE_DEV:
case FSID_MAJOR_MINOR:
if (exp_sb(fhp->fh_export)->s_type->fs_flags & FS_REQUIRES_DEV)
return FSIDSOURCE_DEV;
break;
case FSID_NUM:
if (fhp->fh_export->ex_flags & NFSEXP_FSID)
return FSIDSOURCE_FSID;
break;
default:
break;
}
/* either a UUID type filehandle, or the filehandle doesn't
* match the export.
*/
if (fhp->fh_export->ex_flags & NFSEXP_FSID)
return FSIDSOURCE_FSID;
if (fhp->fh_export->ex_uuid)
return FSIDSOURCE_UUID;
return FSIDSOURCE_DEV;
}