[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:10:46 +04:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
|
|
|
|
*
|
|
|
|
* Authors: Shlomi Gridish <gridish@freescale.com>
|
|
|
|
* Li Yang <leoli@freescale.com>
|
|
|
|
*
|
|
|
|
* Description:
|
|
|
|
* QE UCC Slow API Set - UCC Slow specific routines implementations.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/stddef.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/immap_qe.h>
|
|
|
|
#include <asm/qe.h>
|
|
|
|
|
|
|
|
#include <asm/ucc.h>
|
|
|
|
#include <asm/ucc_slow.h>
|
|
|
|
|
|
|
|
#define uccs_printk(level, format, arg...) \
|
|
|
|
printk(level format "\n", ## arg)
|
|
|
|
|
|
|
|
#define uccs_dbg(format, arg...) \
|
|
|
|
uccs_printk(KERN_DEBUG , format , ## arg)
|
|
|
|
#define uccs_err(format, arg...) \
|
|
|
|
uccs_printk(KERN_ERR , format , ## arg)
|
|
|
|
#define uccs_info(format, arg...) \
|
|
|
|
uccs_printk(KERN_INFO , format , ## arg)
|
|
|
|
#define uccs_warn(format, arg...) \
|
|
|
|
uccs_printk(KERN_WARNING , format , ## arg)
|
|
|
|
|
|
|
|
#ifdef UCCS_VERBOSE_DEBUG
|
|
|
|
#define uccs_vdbg uccs_dbg
|
|
|
|
#else
|
|
|
|
#define uccs_vdbg(fmt, args...) do { } while (0)
|
|
|
|
#endif /* UCCS_VERBOSE_DEBUG */
|
|
|
|
|
|
|
|
u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
|
|
|
|
{
|
|
|
|
switch (uccs_num) {
|
|
|
|
case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
|
|
|
|
case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
|
|
|
|
case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
|
|
|
|
case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
|
|
|
|
case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
|
|
|
|
case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
|
|
|
|
case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
|
|
|
|
case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
|
|
|
|
default: return QE_CR_SUBBLOCK_INVALID;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
|
|
|
|
{
|
|
|
|
out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
|
|
|
|
{
|
|
|
|
struct ucc_slow_info *us_info = uccs->us_info;
|
|
|
|
u32 id;
|
|
|
|
|
|
|
|
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
|
|
|
qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
|
|
|
|
QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
|
|
|
|
{
|
|
|
|
struct ucc_slow_info *us_info = uccs->us_info;
|
|
|
|
u32 id;
|
|
|
|
|
|
|
|
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
|
|
|
qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
|
|
|
|
{
|
|
|
|
struct ucc_slow_info *us_info = uccs->us_info;
|
|
|
|
u32 id;
|
|
|
|
|
|
|
|
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
|
|
|
qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
|
|
|
|
{
|
|
|
|
struct ucc_slow *us_regs;
|
|
|
|
u32 gumr_l;
|
|
|
|
|
|
|
|
us_regs = uccs->us_regs;
|
|
|
|
|
|
|
|
/* Enable reception and/or transmission on this UCC. */
|
|
|
|
gumr_l = in_be32(&us_regs->gumr_l);
|
|
|
|
if (mode & COMM_DIR_TX) {
|
|
|
|
gumr_l |= UCC_SLOW_GUMR_L_ENT;
|
|
|
|
uccs->enabled_tx = 1;
|
|
|
|
}
|
|
|
|
if (mode & COMM_DIR_RX) {
|
|
|
|
gumr_l |= UCC_SLOW_GUMR_L_ENR;
|
|
|
|
uccs->enabled_rx = 1;
|
|
|
|
}
|
|
|
|
out_be32(&us_regs->gumr_l, gumr_l);
|
|
|
|
}
|
|
|
|
|
|
|
|
void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
|
|
|
|
{
|
|
|
|
struct ucc_slow *us_regs;
|
|
|
|
u32 gumr_l;
|
|
|
|
|
|
|
|
us_regs = uccs->us_regs;
|
|
|
|
|
|
|
|
/* Disable reception and/or transmission on this UCC. */
|
|
|
|
gumr_l = in_be32(&us_regs->gumr_l);
|
|
|
|
if (mode & COMM_DIR_TX) {
|
|
|
|
gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
|
|
|
|
uccs->enabled_tx = 0;
|
|
|
|
}
|
|
|
|
if (mode & COMM_DIR_RX) {
|
|
|
|
gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
|
|
|
|
uccs->enabled_rx = 0;
|
|
|
|
}
|
|
|
|
out_be32(&us_regs->gumr_l, gumr_l);
|
|
|
|
}
|
|
|
|
|
|
|
|
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
|
|
|
|
{
|
|
|
|
u32 i;
|
|
|
|
struct ucc_slow *us_regs;
|
|
|
|
u32 gumr;
|
|
|
|
u8 function_code = 0;
|
|
|
|
u8 *bd;
|
|
|
|
struct ucc_slow_private *uccs;
|
|
|
|
u32 id;
|
|
|
|
u32 command;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
uccs_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
|
|
|
|
if (!us_info)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* check if the UCC port number is in range. */
|
|
|
|
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
|
2006-10-19 02:27:32 +04:00
|
|
|
uccs_err("ucc_slow_init: Illegal UCC number!");
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:10:46 +04:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set mrblr
|
|
|
|
* Check that 'max_rx_buf_length' is properly aligned (4), unless
|
|
|
|
* rfw is 1, meaning that QE accepts one byte at a time, unlike normal
|
|
|
|
* case when QE accepts 32 bits at a time.
|
|
|
|
*/
|
|
|
|
if ((!us_info->rfw) &&
|
|
|
|
(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
|
|
|
|
uccs_err("max_rx_buf_length not aligned.");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2006-12-02 14:26:57 +03:00
|
|
|
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:10:46 +04:00
|
|
|
if (!uccs) {
|
|
|
|
uccs_err
|
|
|
|
("ucc_slow_init: No memory for UCC slow data structure!");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill slow UCC structure */
|
|
|
|
uccs->us_info = us_info;
|
|
|
|
uccs->saved_uccm = 0;
|
|
|
|
uccs->p_rx_frame = 0;
|
2007-02-08 19:47:31 +03:00
|
|
|
uccs->us_regs = us_info->regs;
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:10:46 +04:00
|
|
|
us_regs = uccs->us_regs;
|
|
|
|
uccs->p_ucce = (u16 *) & (us_regs->ucce);
|
|
|
|
uccs->p_uccm = (u16 *) & (us_regs->uccm);
|
|
|
|
#ifdef STATISTICS
|
|
|
|
uccs->rx_frames = 0;
|
|
|
|
uccs->tx_frames = 0;
|
|
|
|
uccs->rx_discarded = 0;
|
|
|
|
#endif /* STATISTICS */
|
|
|
|
|
|
|
|
/* Get PRAM base */
|
|
|
|
uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE,
|
|
|
|
ALIGNMENT_OF_UCC_SLOW_PRAM);
|
|
|
|
if (IS_MURAM_ERR(uccs->us_pram_offset)) {
|
|
|
|
uccs_err
|
|
|
|
("ucc_slow_init: Can not allocate MURAM memory "
|
|
|
|
"for Slow UCC.");
|
|
|
|
ucc_slow_free(uccs);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
|
|
|
qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
|
|
|
|
(u32) uccs->us_pram_offset);
|
|
|
|
|
|
|
|
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
|
|
|
|
|
|
|
|
/* Init Guemr register */
|
2007-02-08 19:47:31 +03:00
|
|
|
if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) {
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:10:46 +04:00
|
|
|
uccs_err("ucc_slow_init: Could not init the guemr register.");
|
|
|
|
ucc_slow_free(uccs);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set UCC to slow type */
|
|
|
|
if ((ret = ucc_set_type(us_info->ucc_num,
|
2007-02-08 19:47:31 +03:00
|
|
|
(struct ucc_common *) (us_info->regs),
|
[POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.
Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:
"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support. Qe_lib is used by
QE device drivers such as ucc_geth driver.
This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.
v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.
v3: Address comments from Kumar; Update definition of several
device tree nodes; Copyright style change."
In addition, the following changes have been made:
o removed typedefs
o uint -> u32 conversions
o removed following defines:
QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:10:46 +04:00
|
|
|
UCC_SPEED_TYPE_SLOW))) {
|
|
|
|
uccs_err("ucc_slow_init: Could not init the guemr register.");
|
|
|
|
ucc_slow_free(uccs);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&uccs->confQ);
|
|
|
|
|
|
|
|
/* Allocate BDs. */
|
|
|
|
uccs->rx_base_offset =
|
|
|
|
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
|
|
|
|
QE_ALIGNMENT_OF_BD);
|
|
|
|
if (IS_MURAM_ERR(uccs->rx_base_offset)) {
|
|
|
|
uccs_err("ucc_slow_init: No memory for Rx BD's.");
|
|
|
|
uccs->rx_base_offset = 0;
|
|
|
|
ucc_slow_free(uccs);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
uccs->tx_base_offset =
|
|
|
|
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
|
|
|
|
QE_ALIGNMENT_OF_BD);
|
|
|
|
if (IS_MURAM_ERR(uccs->tx_base_offset)) {
|
|
|
|
uccs_err("ucc_slow_init: No memory for Tx BD's.");
|
|
|
|
uccs->tx_base_offset = 0;
|
|
|
|
ucc_slow_free(uccs);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Init Tx bds */
|
|
|
|
bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
|
|
|
|
for (i = 0; i < us_info->tx_bd_ring_len; i++) {
|
|
|
|
/* clear bd buffer */
|
|
|
|
out_be32(&(((struct qe_bd *)bd)->buf), 0);
|
|
|
|
/* set bd status and length */
|
|
|
|
out_be32((u32*)bd, 0);
|
|
|
|
bd += sizeof(struct qe_bd);
|
|
|
|
}
|
|
|
|
bd -= sizeof(struct qe_bd);
|
|
|
|
/* set bd status and length */
|
|
|
|
out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */
|
|
|
|
|
|
|
|
/* Init Rx bds */
|
|
|
|
bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
|
|
|
|
for (i = 0; i < us_info->rx_bd_ring_len; i++) {
|
|
|
|
/* set bd status and length */
|
|
|
|
out_be32((u32*)bd, 0);
|
|
|
|
/* clear bd buffer */
|
|
|
|
out_be32(&(((struct qe_bd *)bd)->buf), 0);
|
|
|
|
bd += sizeof(struct qe_bd);
|
|
|
|
}
|
|
|
|
bd -= sizeof(struct qe_bd);
|
|
|
|
/* set bd status and length */
|
|
|
|
out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */
|
|
|
|
|
|
|
|
/* Set GUMR (For more details see the hardware spec.). */
|
|
|
|
/* gumr_h */
|
|
|
|
gumr = 0;
|
|
|
|
gumr |= us_info->tcrc;
|
|
|
|
if (us_info->cdp)
|
|
|
|
gumr |= UCC_SLOW_GUMR_H_CDP;
|
|
|
|
if (us_info->ctsp)
|
|
|
|
gumr |= UCC_SLOW_GUMR_H_CTSP;
|
|
|
|
if (us_info->cds)
|
|
|
|
gumr |= UCC_SLOW_GUMR_H_CDS;
|
|
|
|
if (us_info->ctss)
|
|
|
|
gumr |= UCC_SLOW_GUMR_H_CTSS;
|
|
|
|
if (us_info->tfl)
|
|
|
|
gumr |= UCC_SLOW_GUMR_H_TFL;
|
|
|
|
if (us_info->rfw)
|
|
|
|
gumr |= UCC_SLOW_GUMR_H_RFW;
|
|
|
|
if (us_info->txsy)
|
|
|
|
gumr |= UCC_SLOW_GUMR_H_TXSY;
|
|
|
|
if (us_info->rtsm)
|
|
|
|
gumr |= UCC_SLOW_GUMR_H_RTSM;
|
|
|
|
out_be32(&us_regs->gumr_h, gumr);
|
|
|
|
|
|
|
|
/* gumr_l */
|
|
|
|
gumr = 0;
|
|
|
|
if (us_info->tci)
|
|
|
|
gumr |= UCC_SLOW_GUMR_L_TCI;
|
|
|
|
if (us_info->rinv)
|
|
|
|
gumr |= UCC_SLOW_GUMR_L_RINV;
|
|
|
|
if (us_info->tinv)
|
|
|
|
gumr |= UCC_SLOW_GUMR_L_TINV;
|
|
|
|
if (us_info->tend)
|
|
|
|
gumr |= UCC_SLOW_GUMR_L_TEND;
|
|
|
|
gumr |= us_info->tdcr;
|
|
|
|
gumr |= us_info->rdcr;
|
|
|
|
gumr |= us_info->tenc;
|
|
|
|
gumr |= us_info->renc;
|
|
|
|
gumr |= us_info->diag;
|
|
|
|
gumr |= us_info->mode;
|
|
|
|
out_be32(&us_regs->gumr_l, gumr);
|
|
|
|
|
|
|
|
/* Function code registers */
|
|
|
|
/* function_code has initial value 0 */
|
|
|
|
|
|
|
|
/* if the data is in cachable memory, the 'global' */
|
|
|
|
/* in the function code should be set. */
|
|
|
|
function_code |= us_info->data_mem_part;
|
|
|
|
function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */
|
|
|
|
uccs->us_pram->tfcr = function_code;
|
|
|
|
uccs->us_pram->rfcr = function_code;
|
|
|
|
|
|
|
|
/* rbase, tbase are offsets from MURAM base */
|
|
|
|
out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
|
|
|
|
out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
|
|
|
|
|
|
|
|
/* Mux clocking */
|
|
|
|
/* Grant Support */
|
|
|
|
ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
|
|
|
|
/* Breakpoint Support */
|
|
|
|
ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
|
|
|
|
/* Set Tsa or NMSI mode. */
|
|
|
|
ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
|
|
|
|
/* If NMSI (not Tsa), set Tx and Rx clock. */
|
|
|
|
if (!us_info->tsa) {
|
|
|
|
/* Rx clock routing */
|
|
|
|
if (ucc_set_qe_mux_rxtx
|
|
|
|
(us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
|
|
|
|
uccs_err
|
|
|
|
("ucc_slow_init: Illegal value for parameter"
|
|
|
|
" 'RxClock'.");
|
|
|
|
ucc_slow_free(uccs);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
/* Tx clock routing */
|
|
|
|
if (ucc_set_qe_mux_rxtx(us_info->ucc_num,
|
|
|
|
us_info->tx_clock, COMM_DIR_TX)) {
|
|
|
|
uccs_err
|
|
|
|
("ucc_slow_init: Illegal value for parameter "
|
|
|
|
"'TxClock'.");
|
|
|
|
ucc_slow_free(uccs);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* INTERRUPTS
|
|
|
|
*/
|
|
|
|
/* Set interrupt mask register at UCC level. */
|
|
|
|
out_be16(&us_regs->uccm, us_info->uccm_mask);
|
|
|
|
|
|
|
|
/* First, clear anything pending at UCC level, */
|
|
|
|
/* otherwise, old garbage may come through */
|
|
|
|
/* as soon as the dam is opened. */
|
|
|
|
|
|
|
|
/* Writing '1' clears */
|
|
|
|
out_be16(&us_regs->ucce, 0xffff);
|
|
|
|
|
|
|
|
/* Issue QE Init command */
|
|
|
|
if (us_info->init_tx && us_info->init_rx)
|
|
|
|
command = QE_INIT_TX_RX;
|
|
|
|
else if (us_info->init_tx)
|
|
|
|
command = QE_INIT_TX;
|
|
|
|
else
|
|
|
|
command = QE_INIT_RX; /* We know at least one is TRUE */
|
|
|
|
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
|
|
|
|
qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
|
|
|
|
|
|
|
|
*uccs_ret = uccs;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void ucc_slow_free(struct ucc_slow_private * uccs)
|
|
|
|
{
|
|
|
|
if (!uccs)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (uccs->rx_base_offset)
|
|
|
|
qe_muram_free(uccs->rx_base_offset);
|
|
|
|
|
|
|
|
if (uccs->tx_base_offset)
|
|
|
|
qe_muram_free(uccs->tx_base_offset);
|
|
|
|
|
|
|
|
if (uccs->us_pram) {
|
|
|
|
qe_muram_free(uccs->us_pram_offset);
|
|
|
|
uccs->us_pram = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(uccs);
|
|
|
|
}
|