License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2012-11-20 02:21:03 +04:00
|
|
|
#include <linux/hw_breakpoint.h>
|
2015-09-07 11:38:06 +03:00
|
|
|
#include <linux/err.h>
|
2017-04-18 18:26:44 +03:00
|
|
|
#include <dirent.h>
|
2017-04-18 16:46:11 +03:00
|
|
|
#include <errno.h>
|
2017-04-20 01:03:14 +03:00
|
|
|
#include <sys/ioctl.h>
|
2018-01-22 22:42:16 +03:00
|
|
|
#include <sys/types.h>
|
|
|
|
#include <sys/stat.h>
|
|
|
|
#include <fcntl.h>
|
2017-04-20 00:51:14 +03:00
|
|
|
#include <sys/param.h>
|
2017-04-18 17:08:10 +03:00
|
|
|
#include "term.h"
|
2009-09-04 23:39:51 +04:00
|
|
|
#include "../perf.h"
|
2011-01-12 01:56:53 +03:00
|
|
|
#include "evlist.h"
|
2011-01-03 21:39:04 +03:00
|
|
|
#include "evsel.h"
|
2015-12-15 18:39:39 +03:00
|
|
|
#include <subcmd/parse-options.h>
|
2009-05-26 13:10:09 +04:00
|
|
|
#include "parse-events.h"
|
2015-12-15 18:39:39 +03:00
|
|
|
#include <subcmd/exec-cmd.h>
|
2017-04-17 22:51:59 +03:00
|
|
|
#include "string2.h"
|
2017-04-18 16:57:25 +03:00
|
|
|
#include "strlist.h"
|
2010-03-26 01:59:00 +03:00
|
|
|
#include "symbol.h"
|
2009-07-21 22:16:29 +04:00
|
|
|
#include "cache.h"
|
2009-09-12 09:52:51 +04:00
|
|
|
#include "header.h"
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
#include "bpf-loader.h"
|
2014-08-14 06:22:36 +04:00
|
|
|
#include "debug.h"
|
2015-09-02 10:56:34 +03:00
|
|
|
#include <api/fs/tracing_path.h>
|
2012-06-15 10:31:39 +04:00
|
|
|
#include "parse-events-bison.h"
|
2012-06-15 10:31:40 +04:00
|
|
|
#define YY_EXTRA_TYPE int
|
2012-03-15 23:09:15 +04:00
|
|
|
#include "parse-events-flex.h"
|
2012-03-15 23:09:18 +04:00
|
|
|
#include "pmu.h"
|
2013-08-27 06:41:53 +04:00
|
|
|
#include "thread_map.h"
|
2015-06-23 01:36:04 +03:00
|
|
|
#include "cpumap.h"
|
2016-06-24 12:06:46 +03:00
|
|
|
#include "probe-file.h"
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
#include "asm/bug.h"
|
2016-10-13 00:02:06 +03:00
|
|
|
#include "util/parse-branch-options.h"
|
2017-08-31 22:40:32 +03:00
|
|
|
#include "metricgroup.h"
|
2012-03-15 23:09:15 +04:00
|
|
|
|
|
|
|
#define MAX_NAME_LEN 100
|
2009-05-26 13:10:09 +04:00
|
|
|
|
2012-05-21 11:12:50 +04:00
|
|
|
#ifdef PARSER_DEBUG
|
|
|
|
extern int parse_events_debug;
|
|
|
|
#endif
|
2017-08-17 22:13:34 +03:00
|
|
|
int parse_events_parse(void *parse_state, void *scanner);
|
2015-09-28 06:52:16 +03:00
|
|
|
static int get_config_terms(struct list_head *head_config,
|
|
|
|
struct list_head *head_terms __maybe_unused);
|
2009-09-12 01:19:45 +04:00
|
|
|
|
2014-10-07 19:08:50 +04:00
|
|
|
static struct perf_pmu_event_symbol *perf_pmu_events_list;
|
|
|
|
/*
|
|
|
|
* The variable indicates the number of supported pmu event symbols.
|
|
|
|
* 0 means not initialized and ready to init
|
|
|
|
* -1 means failed to init, don't try anymore
|
|
|
|
* >0 is the number of supported pmu event symbols
|
|
|
|
*/
|
|
|
|
static int perf_pmu_events_list_num;
|
|
|
|
|
2015-02-27 13:21:27 +03:00
|
|
|
struct event_symbol event_symbols_hw[PERF_COUNT_HW_MAX] = {
|
2012-07-04 02:00:44 +04:00
|
|
|
[PERF_COUNT_HW_CPU_CYCLES] = {
|
|
|
|
.symbol = "cpu-cycles",
|
|
|
|
.alias = "cycles",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_INSTRUCTIONS] = {
|
|
|
|
.symbol = "instructions",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_CACHE_REFERENCES] = {
|
|
|
|
.symbol = "cache-references",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_CACHE_MISSES] = {
|
|
|
|
.symbol = "cache-misses",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = {
|
|
|
|
.symbol = "branch-instructions",
|
|
|
|
.alias = "branches",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_BRANCH_MISSES] = {
|
|
|
|
.symbol = "branch-misses",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_BUS_CYCLES] = {
|
|
|
|
.symbol = "bus-cycles",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = {
|
|
|
|
.symbol = "stalled-cycles-frontend",
|
|
|
|
.alias = "idle-cycles-frontend",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = {
|
|
|
|
.symbol = "stalled-cycles-backend",
|
|
|
|
.alias = "idle-cycles-backend",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_HW_REF_CPU_CYCLES] = {
|
|
|
|
.symbol = "ref-cycles",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2015-02-27 13:21:27 +03:00
|
|
|
struct event_symbol event_symbols_sw[PERF_COUNT_SW_MAX] = {
|
2012-07-04 02:00:44 +04:00
|
|
|
[PERF_COUNT_SW_CPU_CLOCK] = {
|
|
|
|
.symbol = "cpu-clock",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_SW_TASK_CLOCK] = {
|
|
|
|
.symbol = "task-clock",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_SW_PAGE_FAULTS] = {
|
|
|
|
.symbol = "page-faults",
|
|
|
|
.alias = "faults",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_SW_CONTEXT_SWITCHES] = {
|
|
|
|
.symbol = "context-switches",
|
|
|
|
.alias = "cs",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_SW_CPU_MIGRATIONS] = {
|
|
|
|
.symbol = "cpu-migrations",
|
|
|
|
.alias = "migrations",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_SW_PAGE_FAULTS_MIN] = {
|
|
|
|
.symbol = "minor-faults",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_SW_PAGE_FAULTS_MAJ] = {
|
|
|
|
.symbol = "major-faults",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_SW_ALIGNMENT_FAULTS] = {
|
|
|
|
.symbol = "alignment-faults",
|
|
|
|
.alias = "",
|
|
|
|
},
|
|
|
|
[PERF_COUNT_SW_EMULATION_FAULTS] = {
|
|
|
|
.symbol = "emulation-faults",
|
|
|
|
.alias = "",
|
|
|
|
},
|
2013-08-31 22:50:52 +04:00
|
|
|
[PERF_COUNT_SW_DUMMY] = {
|
|
|
|
.symbol = "dummy",
|
|
|
|
.alias = "",
|
|
|
|
},
|
2015-11-27 21:54:33 +03:00
|
|
|
[PERF_COUNT_SW_BPF_OUTPUT] = {
|
|
|
|
.symbol = "bpf-output",
|
|
|
|
.alias = "",
|
|
|
|
},
|
2009-05-26 13:10:09 +04:00
|
|
|
};
|
|
|
|
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:02:48 +04:00
|
|
|
#define __PERF_EVENT_FIELD(config, name) \
|
|
|
|
((config & PERF_EVENT_##name##_MASK) >> PERF_EVENT_##name##_SHIFT)
|
2009-05-26 11:17:18 +04:00
|
|
|
|
perf stat: Add stalled cycles to the default output
The new default output looks like this:
Performance counter stats for './loop_1b_instructions':
236.010686 task-clock # 0.996 CPUs utilized
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
99 page-faults # 0.000 M/sec
756,487,646 cycles # 3.205 GHz
354,938,996 stalled-cycles # 46.92% of all cycles are idle
1,001,403,797 instructions # 1.32 insns per cycle
# 0.35 stalled cycles per insn
100,279,773 branches # 424.895 M/sec
12,646 branch-misses # 0.013 % of all branches
0.236902540 seconds time elapsed
We dropped cache-refs and cache-misses and added stalled-cycles - this is a
more generic "how well utilized is the CPU" metric.
If the stalled-cycles ratio is too high then more specific measurements can be
taken to figure out the source of the inefficiency.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-pbpl2l4mn797s69bclfpwkwn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-27 07:20:22 +04:00
|
|
|
#define PERF_EVENT_RAW(config) __PERF_EVENT_FIELD(config, RAW)
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:02:48 +04:00
|
|
|
#define PERF_EVENT_CONFIG(config) __PERF_EVENT_FIELD(config, CONFIG)
|
perf stat: Add stalled cycles to the default output
The new default output looks like this:
Performance counter stats for './loop_1b_instructions':
236.010686 task-clock # 0.996 CPUs utilized
0 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
99 page-faults # 0.000 M/sec
756,487,646 cycles # 3.205 GHz
354,938,996 stalled-cycles # 46.92% of all cycles are idle
1,001,403,797 instructions # 1.32 insns per cycle
# 0.35 stalled cycles per insn
100,279,773 branches # 424.895 M/sec
12,646 branch-misses # 0.013 % of all branches
0.236902540 seconds time elapsed
We dropped cache-refs and cache-misses and added stalled-cycles - this is a
more generic "how well utilized is the CPU" metric.
If the stalled-cycles ratio is too high then more specific measurements can be
taken to figure out the source of the inefficiency.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-pbpl2l4mn797s69bclfpwkwn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-27 07:20:22 +04:00
|
|
|
#define PERF_EVENT_TYPE(config) __PERF_EVENT_FIELD(config, TYPE)
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:02:48 +04:00
|
|
|
#define PERF_EVENT_ID(config) __PERF_EVENT_FIELD(config, EVENT)
|
2009-05-26 11:17:18 +04:00
|
|
|
|
2016-04-08 17:53:02 +03:00
|
|
|
#define for_each_subsystem(sys_dir, sys_dirent) \
|
|
|
|
while ((sys_dirent = readdir(sys_dir)) != NULL) \
|
|
|
|
if (sys_dirent->d_type == DT_DIR && \
|
|
|
|
(strcmp(sys_dirent->d_name, ".")) && \
|
|
|
|
(strcmp(sys_dirent->d_name, "..")))
|
2009-07-21 20:20:22 +04:00
|
|
|
|
2009-08-06 18:48:54 +04:00
|
|
|
static int tp_event_has_id(struct dirent *sys_dir, struct dirent *evt_dir)
|
|
|
|
{
|
|
|
|
char evt_path[MAXPATHLEN];
|
|
|
|
int fd;
|
|
|
|
|
2011-11-16 20:03:07 +04:00
|
|
|
snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", tracing_events_path,
|
2009-08-06 18:48:54 +04:00
|
|
|
sys_dir->d_name, evt_dir->d_name);
|
|
|
|
fd = open(evt_path, O_RDONLY);
|
|
|
|
if (fd < 0)
|
|
|
|
return -EINVAL;
|
|
|
|
close(fd);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-04-08 17:53:02 +03:00
|
|
|
#define for_each_event(sys_dirent, evt_dir, evt_dirent) \
|
|
|
|
while ((evt_dirent = readdir(evt_dir)) != NULL) \
|
|
|
|
if (evt_dirent->d_type == DT_DIR && \
|
|
|
|
(strcmp(evt_dirent->d_name, ".")) && \
|
|
|
|
(strcmp(evt_dirent->d_name, "..")) && \
|
|
|
|
(!tp_event_has_id(sys_dirent, evt_dirent)))
|
2009-07-21 20:20:22 +04:00
|
|
|
|
2009-09-17 12:34:51 +04:00
|
|
|
#define MAX_EVENT_LENGTH 512
|
2009-07-21 20:20:22 +04:00
|
|
|
|
|
|
|
|
2009-08-28 05:09:58 +04:00
|
|
|
struct tracepoint_path *tracepoint_id_to_path(u64 config)
|
2009-07-21 20:20:22 +04:00
|
|
|
{
|
2009-08-28 05:09:58 +04:00
|
|
|
struct tracepoint_path *path = NULL;
|
2009-07-21 20:20:22 +04:00
|
|
|
DIR *sys_dir, *evt_dir;
|
2016-04-08 17:53:02 +03:00
|
|
|
struct dirent *sys_dirent, *evt_dirent;
|
2012-03-13 19:51:02 +04:00
|
|
|
char id_buf[24];
|
2009-09-24 17:39:09 +04:00
|
|
|
int fd;
|
2009-07-21 20:20:22 +04:00
|
|
|
u64 id;
|
|
|
|
char evt_path[MAXPATHLEN];
|
2009-09-24 17:39:09 +04:00
|
|
|
char dir_path[MAXPATHLEN];
|
2009-07-21 20:20:22 +04:00
|
|
|
|
2011-11-16 20:03:07 +04:00
|
|
|
sys_dir = opendir(tracing_events_path);
|
2009-07-21 20:20:22 +04:00
|
|
|
if (!sys_dir)
|
2009-09-24 17:39:09 +04:00
|
|
|
return NULL;
|
2009-09-04 23:39:51 +04:00
|
|
|
|
2016-04-08 17:53:02 +03:00
|
|
|
for_each_subsystem(sys_dir, sys_dirent) {
|
2009-09-24 17:39:09 +04:00
|
|
|
|
2011-11-16 20:03:07 +04:00
|
|
|
snprintf(dir_path, MAXPATHLEN, "%s/%s", tracing_events_path,
|
2016-04-08 17:53:02 +03:00
|
|
|
sys_dirent->d_name);
|
2009-09-24 17:39:09 +04:00
|
|
|
evt_dir = opendir(dir_path);
|
|
|
|
if (!evt_dir)
|
2009-09-04 23:39:51 +04:00
|
|
|
continue;
|
2009-09-24 17:39:09 +04:00
|
|
|
|
2016-04-08 17:53:02 +03:00
|
|
|
for_each_event(sys_dirent, evt_dir, evt_dirent) {
|
2009-09-24 17:39:09 +04:00
|
|
|
|
2018-03-19 11:29:01 +03:00
|
|
|
scnprintf(evt_path, MAXPATHLEN, "%s/%s/id", dir_path,
|
|
|
|
evt_dirent->d_name);
|
2009-09-24 17:39:09 +04:00
|
|
|
fd = open(evt_path, O_RDONLY);
|
2009-07-21 20:20:22 +04:00
|
|
|
if (fd < 0)
|
|
|
|
continue;
|
|
|
|
if (read(fd, id_buf, sizeof(id_buf)) < 0) {
|
|
|
|
close(fd);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
close(fd);
|
|
|
|
id = atoll(id_buf);
|
|
|
|
if (id == config) {
|
|
|
|
closedir(evt_dir);
|
|
|
|
closedir(sys_dir);
|
2009-12-06 12:16:30 +03:00
|
|
|
path = zalloc(sizeof(*path));
|
2017-02-01 15:34:05 +03:00
|
|
|
if (!path)
|
|
|
|
return NULL;
|
2009-08-28 05:09:58 +04:00
|
|
|
path->system = malloc(MAX_EVENT_LENGTH);
|
|
|
|
if (!path->system) {
|
|
|
|
free(path);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
path->name = malloc(MAX_EVENT_LENGTH);
|
|
|
|
if (!path->name) {
|
2013-12-27 23:55:14 +04:00
|
|
|
zfree(&path->system);
|
2009-08-28 05:09:58 +04:00
|
|
|
free(path);
|
|
|
|
return NULL;
|
|
|
|
}
|
2016-04-08 17:53:02 +03:00
|
|
|
strncpy(path->system, sys_dirent->d_name,
|
2009-08-28 05:09:58 +04:00
|
|
|
MAX_EVENT_LENGTH);
|
2016-04-08 17:53:02 +03:00
|
|
|
strncpy(path->name, evt_dirent->d_name,
|
2009-08-28 05:09:58 +04:00
|
|
|
MAX_EVENT_LENGTH);
|
|
|
|
return path;
|
2009-07-21 20:20:22 +04:00
|
|
|
}
|
|
|
|
}
|
|
|
|
closedir(evt_dir);
|
|
|
|
}
|
|
|
|
|
|
|
|
closedir(sys_dir);
|
2009-08-28 05:09:58 +04:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2013-06-26 11:14:05 +04:00
|
|
|
struct tracepoint_path *tracepoint_name_to_path(const char *name)
|
|
|
|
{
|
|
|
|
struct tracepoint_path *path = zalloc(sizeof(*path));
|
|
|
|
char *str = strchr(name, ':');
|
|
|
|
|
|
|
|
if (path == NULL || str == NULL) {
|
|
|
|
free(path);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
path->system = strndup(name, str - name);
|
|
|
|
path->name = strdup(str+1);
|
|
|
|
|
|
|
|
if (path->system == NULL || path->name == NULL) {
|
2013-12-27 23:55:14 +04:00
|
|
|
zfree(&path->system);
|
|
|
|
zfree(&path->name);
|
2017-02-01 15:34:06 +03:00
|
|
|
zfree(&path);
|
2013-06-26 11:14:05 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
return path;
|
|
|
|
}
|
|
|
|
|
2011-03-10 08:23:28 +03:00
|
|
|
const char *event_type(int type)
|
|
|
|
{
|
|
|
|
switch (type) {
|
|
|
|
case PERF_TYPE_HARDWARE:
|
|
|
|
return "hardware";
|
|
|
|
|
|
|
|
case PERF_TYPE_SOFTWARE:
|
|
|
|
return "software";
|
|
|
|
|
|
|
|
case PERF_TYPE_TRACEPOINT:
|
|
|
|
return "tracepoint";
|
|
|
|
|
|
|
|
case PERF_TYPE_HW_CACHE:
|
|
|
|
return "hardware-cache";
|
|
|
|
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return "unknown";
|
|
|
|
}
|
|
|
|
|
2016-02-19 14:43:59 +03:00
|
|
|
static int parse_events__is_name_term(struct parse_events_term *term)
|
|
|
|
{
|
|
|
|
return term->type_term == PARSE_EVENTS__TERM_TYPE_NAME;
|
|
|
|
}
|
2012-09-10 11:53:50 +04:00
|
|
|
|
2016-02-19 14:43:59 +03:00
|
|
|
static char *get_config_name(struct list_head *head_terms)
|
|
|
|
{
|
|
|
|
struct parse_events_term *term;
|
|
|
|
|
|
|
|
if (!head_terms)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
list_for_each_entry(term, head_terms, list)
|
|
|
|
if (parse_events__is_name_term(term))
|
|
|
|
return term->val.str;
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
2012-09-10 11:53:50 +04:00
|
|
|
|
2013-11-12 20:58:49 +04:00
|
|
|
static struct perf_evsel *
|
|
|
|
__add_event(struct list_head *list, int *idx,
|
|
|
|
struct perf_event_attr *attr,
|
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95544010 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-06 21:38:22 +03:00
|
|
|
char *name, struct perf_pmu *pmu,
|
perf stat: Only auto-merge events that are PMU aliases
Peter reported that when he explicitely asked for multiple events with
the same name on the command line it got coalesced into just one line,
i.e.:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
3,269,652 cycles
0.000884123 seconds time elapsed
#
And while there is the --no-merges option to disable that auto-merging,
this is a blunt change in behaviour for such explicit request, so change
the code so that this auto merging is done only when handling the multi
PMU aliases with the same name that introduced this coalescing,
restoring the previous behaviour for the explicit case:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,472,837 cycles
1,472,837 cycles
1,472,837 cycles
0.001764870 seconds time elapsed
#
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 430daf2dc7af ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20170831184122.GK4831@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 21:32:18 +03:00
|
|
|
struct list_head *config_terms, bool auto_merge_stats)
|
2012-03-15 23:09:15 +04:00
|
|
|
{
|
|
|
|
struct perf_evsel *evsel;
|
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95544010 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-06 21:38:22 +03:00
|
|
|
struct cpu_map *cpus = pmu ? pmu->cpus : NULL;
|
2012-03-15 23:09:15 +04:00
|
|
|
|
|
|
|
event_attr_init(attr);
|
|
|
|
|
2017-02-01 15:34:04 +03:00
|
|
|
evsel = perf_evsel__new_idx(attr, *idx);
|
2013-07-02 23:27:25 +04:00
|
|
|
if (!evsel)
|
2013-11-12 20:58:49 +04:00
|
|
|
return NULL;
|
2012-03-15 23:09:15 +04:00
|
|
|
|
2017-02-01 15:34:04 +03:00
|
|
|
(*idx)++;
|
perf tools: Force uncore events to system wide monitoring
Make system wide (-a) the default option if no target was specified and
one of following conditions is met:
- there's no workload specified (current behaviour)
- there is workload specified but all requested
events are system wide ones
Mixed events core/uncore with workload:
$ perf stat -e 'uncore_cbox_0/clockticks/,cycles' sleep 1
Performance counter stats for 'sleep 1':
<not supported> uncore_cbox_0/clockticks/
980,489 cycles
1.000897406 seconds time elapsed
Uncore event with workload:
$ perf stat -e 'uncore_cbox_0/clockticks/' sleep 1
Performance counter stats for 'system wide':
281,473,897,192,670 uncore_cbox_0/clockticks/
1.000833784 seconds time elapsed
Committer note:
When testing I realized the default case for !root, i.e. no events
passed via -e, was broke by v2 of this patch, reported and after a
patch provided by Jiri it is back working:
[acme@jouet linux]$ perf stat usleep 1
Performance counter stats for 'usleep 1':
0.401335 task-clock:u (msec) # 0.297 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
48 page-faults:u # 0.120 M/sec
458,146 cycles:u # 1.142 GHz
245,113 instructions:u # 0.54 insn per cycle
47,991 branches:u # 119.578 M/sec
4,022 branch-misses:u # 8.38% of all branches
0.001350029 seconds time elapsed
[acme@jouet linux]$
Suggested-and-Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170227094818.GA12764@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-27 12:48:18 +03:00
|
|
|
evsel->cpus = cpu_map__get(cpus);
|
|
|
|
evsel->own_cpus = cpu_map__get(cpus);
|
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95544010 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-06 21:38:22 +03:00
|
|
|
evsel->system_wide = pmu ? pmu->is_uncore : false;
|
perf stat: Only auto-merge events that are PMU aliases
Peter reported that when he explicitely asked for multiple events with
the same name on the command line it got coalesced into just one line,
i.e.:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
3,269,652 cycles
0.000884123 seconds time elapsed
#
And while there is the --no-merges option to disable that auto-merging,
this is a blunt change in behaviour for such explicit request, so change
the code so that this auto merging is done only when handling the multi
PMU aliases with the same name that introduced this coalescing,
restoring the previous behaviour for the explicit case:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,472,837 cycles
1,472,837 cycles
1,472,837 cycles
0.001764870 seconds time elapsed
#
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 430daf2dc7af ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20170831184122.GK4831@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 21:32:18 +03:00
|
|
|
evsel->auto_merge_stats = auto_merge_stats;
|
2015-06-23 01:36:04 +03:00
|
|
|
|
2012-06-12 20:45:00 +04:00
|
|
|
if (name)
|
|
|
|
evsel->name = strdup(name);
|
2015-07-29 12:42:10 +03:00
|
|
|
|
|
|
|
if (config_terms)
|
|
|
|
list_splice(config_terms, &evsel->config_terms);
|
|
|
|
|
2012-05-21 11:12:51 +04:00
|
|
|
list_add_tail(&evsel->node, list);
|
2013-11-12 20:58:49 +04:00
|
|
|
return evsel;
|
2012-03-15 23:09:15 +04:00
|
|
|
}
|
|
|
|
|
2013-07-02 23:27:25 +04:00
|
|
|
static int add_event(struct list_head *list, int *idx,
|
2015-07-29 12:42:10 +03:00
|
|
|
struct perf_event_attr *attr, char *name,
|
|
|
|
struct list_head *config_terms)
|
2012-09-10 11:53:50 +04:00
|
|
|
{
|
perf stat: Only auto-merge events that are PMU aliases
Peter reported that when he explicitely asked for multiple events with
the same name on the command line it got coalesced into just one line,
i.e.:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
3,269,652 cycles
0.000884123 seconds time elapsed
#
And while there is the --no-merges option to disable that auto-merging,
this is a blunt change in behaviour for such explicit request, so change
the code so that this auto merging is done only when handling the multi
PMU aliases with the same name that introduced this coalescing,
restoring the previous behaviour for the explicit case:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,472,837 cycles
1,472,837 cycles
1,472,837 cycles
0.001764870 seconds time elapsed
#
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 430daf2dc7af ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20170831184122.GK4831@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 21:32:18 +03:00
|
|
|
return __add_event(list, idx, attr, name, NULL, config_terms, false) ? 0 : -ENOMEM;
|
2012-09-10 11:53:50 +04:00
|
|
|
}
|
|
|
|
|
2012-06-11 21:08:07 +04:00
|
|
|
static int parse_aliases(char *str, const char *names[][PERF_EVSEL__MAX_ALIASES], int size)
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
{
|
|
|
|
int i, j;
|
2009-07-01 07:04:34 +04:00
|
|
|
int n, longest = -1;
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
|
|
|
|
for (i = 0; i < size; i++) {
|
2012-06-11 21:08:07 +04:00
|
|
|
for (j = 0; j < PERF_EVSEL__MAX_ALIASES && names[i][j]; j++) {
|
2009-07-01 07:04:34 +04:00
|
|
|
n = strlen(names[i][j]);
|
2012-03-15 23:09:15 +04:00
|
|
|
if (n > longest && !strncasecmp(str, names[i][j], n))
|
2009-07-01 07:04:34 +04:00
|
|
|
longest = n;
|
|
|
|
}
|
2012-03-15 23:09:15 +04:00
|
|
|
if (longest > 0)
|
2009-07-01 07:04:34 +04:00
|
|
|
return i;
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
}
|
|
|
|
|
2009-06-06 23:04:17 +04:00
|
|
|
return -1;
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
}
|
|
|
|
|
2016-02-19 14:44:01 +03:00
|
|
|
typedef int config_term_func_t(struct perf_event_attr *attr,
|
|
|
|
struct parse_events_term *term,
|
|
|
|
struct parse_events_error *err);
|
|
|
|
static int config_term_common(struct perf_event_attr *attr,
|
|
|
|
struct parse_events_term *term,
|
|
|
|
struct parse_events_error *err);
|
|
|
|
static int config_attr(struct perf_event_attr *attr,
|
|
|
|
struct list_head *head,
|
|
|
|
struct parse_events_error *err,
|
|
|
|
config_term_func_t config_term);
|
|
|
|
|
2013-07-02 23:27:25 +04:00
|
|
|
int parse_events_add_cache(struct list_head *list, int *idx,
|
2016-02-19 14:44:01 +03:00
|
|
|
char *type, char *op_result1, char *op_result2,
|
2016-02-20 01:47:04 +03:00
|
|
|
struct parse_events_error *err,
|
2016-02-19 14:44:01 +03:00
|
|
|
struct list_head *head_config)
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
{
|
2012-03-15 23:09:15 +04:00
|
|
|
struct perf_event_attr attr;
|
2016-02-19 14:44:01 +03:00
|
|
|
LIST_HEAD(config_terms);
|
|
|
|
char name[MAX_NAME_LEN], *config_name;
|
2009-07-01 07:04:34 +04:00
|
|
|
int cache_type = -1, cache_op = -1, cache_result = -1;
|
2012-03-15 23:09:15 +04:00
|
|
|
char *op_result[2] = { op_result1, op_result2 };
|
|
|
|
int i, n;
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* No fallback - if we cannot get a clear cache type
|
|
|
|
* then bail out:
|
|
|
|
*/
|
2012-06-11 21:08:07 +04:00
|
|
|
cache_type = parse_aliases(type, perf_evsel__hw_cache,
|
2012-03-15 23:09:15 +04:00
|
|
|
PERF_COUNT_HW_CACHE_MAX);
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
if (cache_type == -1)
|
2012-03-15 23:09:15 +04:00
|
|
|
return -EINVAL;
|
|
|
|
|
2016-02-19 14:44:01 +03:00
|
|
|
config_name = get_config_name(head_config);
|
2012-03-15 23:09:15 +04:00
|
|
|
n = snprintf(name, MAX_NAME_LEN, "%s", type);
|
2009-07-01 07:04:34 +04:00
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
for (i = 0; (i < 2) && (op_result[i]); i++) {
|
|
|
|
char *str = op_result[i];
|
|
|
|
|
2012-09-05 21:51:33 +04:00
|
|
|
n += snprintf(name + n, MAX_NAME_LEN - n, "-%s", str);
|
2009-07-01 07:04:34 +04:00
|
|
|
|
|
|
|
if (cache_op == -1) {
|
2012-06-11 21:08:07 +04:00
|
|
|
cache_op = parse_aliases(str, perf_evsel__hw_cache_op,
|
2012-03-15 23:09:15 +04:00
|
|
|
PERF_COUNT_HW_CACHE_OP_MAX);
|
2009-07-01 07:04:34 +04:00
|
|
|
if (cache_op >= 0) {
|
2012-06-11 21:08:07 +04:00
|
|
|
if (!perf_evsel__is_cache_op_valid(cache_type, cache_op))
|
2012-03-15 23:09:15 +04:00
|
|
|
return -EINVAL;
|
2009-07-01 07:04:34 +04:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (cache_result == -1) {
|
2012-06-11 21:08:07 +04:00
|
|
|
cache_result = parse_aliases(str, perf_evsel__hw_cache_result,
|
|
|
|
PERF_COUNT_HW_CACHE_RESULT_MAX);
|
2009-07-01 07:04:34 +04:00
|
|
|
if (cache_result >= 0)
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Fall back to reads:
|
|
|
|
*/
|
2009-06-06 23:04:17 +04:00
|
|
|
if (cache_op == -1)
|
|
|
|
cache_op = PERF_COUNT_HW_CACHE_OP_READ;
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Fall back to accesses:
|
|
|
|
*/
|
|
|
|
if (cache_result == -1)
|
|
|
|
cache_result = PERF_COUNT_HW_CACHE_RESULT_ACCESS;
|
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
memset(&attr, 0, sizeof(attr));
|
|
|
|
attr.config = cache_type | (cache_op << 8) | (cache_result << 16);
|
|
|
|
attr.type = PERF_TYPE_HW_CACHE;
|
2016-02-19 14:44:01 +03:00
|
|
|
|
|
|
|
if (head_config) {
|
2016-02-20 01:47:04 +03:00
|
|
|
if (config_attr(&attr, head_config, err,
|
2016-02-19 14:44:01 +03:00
|
|
|
config_term_common))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (get_config_terms(head_config, &config_terms))
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
return add_event(list, idx, &attr, config_name ? : name, &config_terms);
|
2009-09-12 01:19:45 +04:00
|
|
|
}
|
|
|
|
|
2015-09-29 18:05:31 +03:00
|
|
|
static void tracepoint_error(struct parse_events_error *e, int err,
|
2016-07-13 13:44:03 +03:00
|
|
|
const char *sys, const char *name)
|
2015-09-07 11:38:07 +03:00
|
|
|
{
|
|
|
|
char help[BUFSIZ];
|
|
|
|
|
perf tools: tracepoint_error() can receive e=NULL, robustify it
Fixes segmentation fault using, for instance:
(gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
(gdb) bt
#0 0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
#1 0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:433
#2 0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:498
#3 0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:936
#4 0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391
#5 0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361
#6 0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401
#7 0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253
#8 0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364
#9 0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664
#10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539
#11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264
#12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390
#13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451
#14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495
#15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618
(gdb)
Intel PT attempts to find the sched:sched_switch tracepoint but that seg
faults if tracefs is not readable, because the error reporting structure
is null, as errors are not reported when automatically adding
tracepoints. Fix by checking before using.
Committer note:
This doesn't take place in a kernel that supports
perf_event_attr.context_switch, that is the default way that will be
used for tracking context switches, only in older kernels, like 4.2, in
a machine with Intel PT (e.g. Broadwell) for non-priviledged users.
Further info from a similar patch by Wang:
The error is in tracepoint_error: it assumes the 'e' parameter is valid.
However, there are many situation a parse_event() can be called without
parse_events_error. See result of
$ grep 'parse_events(.*NULL)' ./tools/perf/ -r'
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Tong Zhang <ztong@vt.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 196581717d85 ("perf tools: Enhance parsing events tracepoint error output")
Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 15:05:20 +03:00
|
|
|
if (!e)
|
|
|
|
return;
|
|
|
|
|
2015-09-07 11:38:07 +03:00
|
|
|
/*
|
|
|
|
* We get error directly from syscall errno ( > 0),
|
|
|
|
* or from encoded pointer's error ( < 0).
|
|
|
|
*/
|
|
|
|
err = abs(err);
|
|
|
|
|
|
|
|
switch (err) {
|
|
|
|
case EACCES:
|
2015-09-29 18:05:31 +03:00
|
|
|
e->str = strdup("can't access trace events");
|
2015-09-07 11:38:07 +03:00
|
|
|
break;
|
|
|
|
case ENOENT:
|
2015-09-29 18:05:31 +03:00
|
|
|
e->str = strdup("unknown tracepoint");
|
2015-09-07 11:38:07 +03:00
|
|
|
break;
|
|
|
|
default:
|
2015-09-29 18:05:31 +03:00
|
|
|
e->str = strdup("failed to add tracepoint");
|
2015-09-07 11:38:07 +03:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
tracing_path__strerror_open_tp(err, help, sizeof(help), sys, name);
|
2015-09-29 18:05:31 +03:00
|
|
|
e->help = strdup(help);
|
2015-09-07 11:38:07 +03:00
|
|
|
}
|
|
|
|
|
2013-07-02 23:27:25 +04:00
|
|
|
static int add_tracepoint(struct list_head *list, int *idx,
|
2016-07-13 13:44:03 +03:00
|
|
|
const char *sys_name, const char *evt_name,
|
2015-09-29 18:05:31 +03:00
|
|
|
struct parse_events_error *err,
|
2015-09-28 06:52:16 +03:00
|
|
|
struct list_head *head_config)
|
2009-09-12 01:19:45 +04:00
|
|
|
{
|
2012-09-27 00:13:07 +04:00
|
|
|
struct perf_evsel *evsel;
|
2009-09-12 01:19:45 +04:00
|
|
|
|
2013-11-07 23:41:19 +04:00
|
|
|
evsel = perf_evsel__newtp_idx(sys_name, evt_name, (*idx)++);
|
2015-09-07 11:38:07 +03:00
|
|
|
if (IS_ERR(evsel)) {
|
2015-09-29 18:05:31 +03:00
|
|
|
tracepoint_error(err, PTR_ERR(evsel), sys_name, evt_name);
|
2015-09-07 11:38:06 +03:00
|
|
|
return PTR_ERR(evsel);
|
2015-09-07 11:38:07 +03:00
|
|
|
}
|
2009-09-12 01:19:45 +04:00
|
|
|
|
2015-09-28 06:52:16 +03:00
|
|
|
if (head_config) {
|
|
|
|
LIST_HEAD(config_terms);
|
|
|
|
|
|
|
|
if (get_config_terms(head_config, &config_terms))
|
|
|
|
return -ENOMEM;
|
|
|
|
list_splice(&config_terms, &evsel->config_terms);
|
|
|
|
}
|
|
|
|
|
2012-09-27 00:13:07 +04:00
|
|
|
list_add_tail(&evsel->node, list);
|
|
|
|
return 0;
|
perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.
This is a 3-dimensional space:
{ L1-D, L1-I, L2, ITLB, DTLB, BPU } x
{ load, store, prefetch } x
{ accesses, misses }
User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)
Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.
Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.
( x86 is supported for now, with the Nehalem event table filled in,
and with Core2 and Atom having placeholder tables. )
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 22:22:46 +04:00
|
|
|
}
|
|
|
|
|
2013-07-02 23:27:25 +04:00
|
|
|
static int add_tracepoint_multi_event(struct list_head *list, int *idx,
|
2016-07-13 13:44:03 +03:00
|
|
|
const char *sys_name, const char *evt_name,
|
2015-09-29 18:05:31 +03:00
|
|
|
struct parse_events_error *err,
|
2015-09-28 06:52:16 +03:00
|
|
|
struct list_head *head_config)
|
2009-09-12 01:19:45 +04:00
|
|
|
{
|
|
|
|
char evt_path[MAXPATHLEN];
|
|
|
|
struct dirent *evt_ent;
|
|
|
|
DIR *evt_dir;
|
2015-10-05 22:31:17 +03:00
|
|
|
int ret = 0, found = 0;
|
2009-09-12 01:19:45 +04:00
|
|
|
|
2011-11-16 20:03:07 +04:00
|
|
|
snprintf(evt_path, MAXPATHLEN, "%s/%s", tracing_events_path, sys_name);
|
2009-09-12 01:19:45 +04:00
|
|
|
evt_dir = opendir(evt_path);
|
|
|
|
if (!evt_dir) {
|
2015-09-29 18:05:31 +03:00
|
|
|
tracepoint_error(err, errno, sys_name, evt_name);
|
2012-03-15 23:09:15 +04:00
|
|
|
return -1;
|
2009-09-12 01:19:45 +04:00
|
|
|
}
|
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
while (!ret && (evt_ent = readdir(evt_dir))) {
|
2009-09-12 01:19:45 +04:00
|
|
|
if (!strcmp(evt_ent->d_name, ".")
|
|
|
|
|| !strcmp(evt_ent->d_name, "..")
|
|
|
|
|| !strcmp(evt_ent->d_name, "enable")
|
|
|
|
|| !strcmp(evt_ent->d_name, "filter"))
|
|
|
|
continue;
|
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
if (!strglobmatch(evt_ent->d_name, evt_name))
|
2010-01-06 01:47:17 +03:00
|
|
|
continue;
|
|
|
|
|
2015-10-05 22:31:17 +03:00
|
|
|
found++;
|
|
|
|
|
2015-09-28 06:52:16 +03:00
|
|
|
ret = add_tracepoint(list, idx, sys_name, evt_ent->d_name,
|
2015-09-29 18:05:31 +03:00
|
|
|
err, head_config);
|
2009-09-12 01:19:45 +04:00
|
|
|
}
|
|
|
|
|
2015-10-05 22:31:17 +03:00
|
|
|
if (!found) {
|
|
|
|
tracepoint_error(err, ENOENT, sys_name, evt_name);
|
|
|
|
ret = -1;
|
|
|
|
}
|
|
|
|
|
2012-12-17 17:08:36 +04:00
|
|
|
closedir(evt_dir);
|
2012-03-15 23:09:15 +04:00
|
|
|
return ret;
|
2009-09-12 01:19:45 +04:00
|
|
|
}
|
|
|
|
|
2013-07-02 23:27:25 +04:00
|
|
|
static int add_tracepoint_event(struct list_head *list, int *idx,
|
2016-07-13 13:44:03 +03:00
|
|
|
const char *sys_name, const char *evt_name,
|
2015-09-29 18:05:31 +03:00
|
|
|
struct parse_events_error *err,
|
2015-09-28 06:52:16 +03:00
|
|
|
struct list_head *head_config)
|
2012-12-17 17:08:37 +04:00
|
|
|
{
|
|
|
|
return strpbrk(evt_name, "*?") ?
|
2015-09-28 06:52:16 +03:00
|
|
|
add_tracepoint_multi_event(list, idx, sys_name, evt_name,
|
2015-09-29 18:05:31 +03:00
|
|
|
err, head_config) :
|
2015-09-28 06:52:16 +03:00
|
|
|
add_tracepoint(list, idx, sys_name, evt_name,
|
2015-09-29 18:05:31 +03:00
|
|
|
err, head_config);
|
2012-12-17 17:08:37 +04:00
|
|
|
}
|
|
|
|
|
2013-07-02 23:27:25 +04:00
|
|
|
static int add_tracepoint_multi_sys(struct list_head *list, int *idx,
|
2016-07-13 13:44:03 +03:00
|
|
|
const char *sys_name, const char *evt_name,
|
2015-09-29 18:05:31 +03:00
|
|
|
struct parse_events_error *err,
|
2015-09-28 06:52:16 +03:00
|
|
|
struct list_head *head_config)
|
2012-12-17 17:08:37 +04:00
|
|
|
{
|
|
|
|
struct dirent *events_ent;
|
|
|
|
DIR *events_dir;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
events_dir = opendir(tracing_events_path);
|
|
|
|
if (!events_dir) {
|
2015-09-29 18:05:31 +03:00
|
|
|
tracepoint_error(err, errno, sys_name, evt_name);
|
2012-12-17 17:08:37 +04:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (!ret && (events_ent = readdir(events_dir))) {
|
|
|
|
if (!strcmp(events_ent->d_name, ".")
|
|
|
|
|| !strcmp(events_ent->d_name, "..")
|
|
|
|
|| !strcmp(events_ent->d_name, "enable")
|
|
|
|
|| !strcmp(events_ent->d_name, "header_event")
|
|
|
|
|| !strcmp(events_ent->d_name, "header_page"))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (!strglobmatch(events_ent->d_name, sys_name))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = add_tracepoint_event(list, idx, events_ent->d_name,
|
2015-09-29 18:05:31 +03:00
|
|
|
evt_name, err, head_config);
|
2012-12-17 17:08:37 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
closedir(events_dir);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
struct __add_bpf_event_param {
|
2017-08-17 22:13:34 +03:00
|
|
|
struct parse_events_state *parse_state;
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
struct list_head *list;
|
2016-02-22 12:10:36 +03:00
|
|
|
struct list_head *head_config;
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
};
|
|
|
|
|
2016-07-13 13:44:04 +03:00
|
|
|
static int add_bpf_event(const char *group, const char *event, int fd,
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
void *_param)
|
|
|
|
{
|
|
|
|
LIST_HEAD(new_evsels);
|
|
|
|
struct __add_bpf_event_param *param = _param;
|
2017-08-17 22:13:34 +03:00
|
|
|
struct parse_events_state *parse_state = param->parse_state;
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
struct list_head *list = param->list;
|
perf bpf: Attach eBPF filter to perf event
This is the final patch which makes basic BPF filter work. After
applying this patch, users are allowed to use BPF filter like:
# perf record --event ./hello_world.o ls
A bpf_fd field is appended to 'struct evsel', and setup during the
callback function add_bpf_event() for each 'probe_trace_event'.
PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly
created perf event. The file descriptor of the eBPF program is passed to
perf record using previous patches, and stored into evsel->bpf_fd.
It is possible that different perf event are created for one kprobe
events for different CPUs. In this case, when trying to call the ioctl,
EEXIST will be return. This patch doesn't treat it as an error.
Committer note:
The bpf proggie used so far:
__attribute__((section("fork=_do_fork"), used))
int fork(void *ctx)
{
return 0;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
failed to produce any samples, even with forks happening and it being
running in system wide mode.
That is because now the filter is being associated, and the code above
always returns zero, meaning that all forks will be probed but filtered
away ;-/
Change it to 'return 1;' instead and after that:
# trace --no-syscalls --event /tmp/foo.o
0.000 perf_bpf_probe:fork:(ffffffff8109be30))
2.333 perf_bpf_probe:fork:(ffffffff8109be30))
3.725 perf_bpf_probe:fork:(ffffffff8109be30))
4.550 perf_bpf_probe:fork:(ffffffff8109be30))
^C#
And it works with all tools, including 'perf trace'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:18 +03:00
|
|
|
struct perf_evsel *pos;
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
int err;
|
|
|
|
|
|
|
|
pr_debug("add bpf event %s:%s and attach bpf program %d\n",
|
2016-07-13 13:44:04 +03:00
|
|
|
group, event, fd);
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
|
2017-08-17 20:13:25 +03:00
|
|
|
err = parse_events_add_tracepoint(&new_evsels, &parse_state->idx, group,
|
|
|
|
event, parse_state->error,
|
2016-02-22 12:10:36 +03:00
|
|
|
param->head_config);
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
if (err) {
|
|
|
|
struct perf_evsel *evsel, *tmp;
|
|
|
|
|
|
|
|
pr_debug("Failed to add BPF event %s:%s\n",
|
2016-07-13 13:44:04 +03:00
|
|
|
group, event);
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
list_for_each_entry_safe(evsel, tmp, &new_evsels, node) {
|
|
|
|
list_del(&evsel->node);
|
|
|
|
perf_evsel__delete(evsel);
|
|
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
2016-07-13 13:44:04 +03:00
|
|
|
pr_debug("adding %s:%s\n", group, event);
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
|
perf bpf: Attach eBPF filter to perf event
This is the final patch which makes basic BPF filter work. After
applying this patch, users are allowed to use BPF filter like:
# perf record --event ./hello_world.o ls
A bpf_fd field is appended to 'struct evsel', and setup during the
callback function add_bpf_event() for each 'probe_trace_event'.
PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly
created perf event. The file descriptor of the eBPF program is passed to
perf record using previous patches, and stored into evsel->bpf_fd.
It is possible that different perf event are created for one kprobe
events for different CPUs. In this case, when trying to call the ioctl,
EEXIST will be return. This patch doesn't treat it as an error.
Committer note:
The bpf proggie used so far:
__attribute__((section("fork=_do_fork"), used))
int fork(void *ctx)
{
return 0;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
failed to produce any samples, even with forks happening and it being
running in system wide mode.
That is because now the filter is being associated, and the code above
always returns zero, meaning that all forks will be probed but filtered
away ;-/
Change it to 'return 1;' instead and after that:
# trace --no-syscalls --event /tmp/foo.o
0.000 perf_bpf_probe:fork:(ffffffff8109be30))
2.333 perf_bpf_probe:fork:(ffffffff8109be30))
3.725 perf_bpf_probe:fork:(ffffffff8109be30))
4.550 perf_bpf_probe:fork:(ffffffff8109be30))
^C#
And it works with all tools, including 'perf trace'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:18 +03:00
|
|
|
list_for_each_entry(pos, &new_evsels, node) {
|
|
|
|
pr_debug("adding %s:%s to %p\n",
|
2016-07-13 13:44:04 +03:00
|
|
|
group, event, pos);
|
perf bpf: Attach eBPF filter to perf event
This is the final patch which makes basic BPF filter work. After
applying this patch, users are allowed to use BPF filter like:
# perf record --event ./hello_world.o ls
A bpf_fd field is appended to 'struct evsel', and setup during the
callback function add_bpf_event() for each 'probe_trace_event'.
PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly
created perf event. The file descriptor of the eBPF program is passed to
perf record using previous patches, and stored into evsel->bpf_fd.
It is possible that different perf event are created for one kprobe
events for different CPUs. In this case, when trying to call the ioctl,
EEXIST will be return. This patch doesn't treat it as an error.
Committer note:
The bpf proggie used so far:
__attribute__((section("fork=_do_fork"), used))
int fork(void *ctx)
{
return 0;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
failed to produce any samples, even with forks happening and it being
running in system wide mode.
That is because now the filter is being associated, and the code above
always returns zero, meaning that all forks will be probed but filtered
away ;-/
Change it to 'return 1;' instead and after that:
# trace --no-syscalls --event /tmp/foo.o
0.000 perf_bpf_probe:fork:(ffffffff8109be30))
2.333 perf_bpf_probe:fork:(ffffffff8109be30))
3.725 perf_bpf_probe:fork:(ffffffff8109be30))
4.550 perf_bpf_probe:fork:(ffffffff8109be30))
^C#
And it works with all tools, including 'perf trace'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:18 +03:00
|
|
|
pos->bpf_fd = fd;
|
|
|
|
}
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
list_splice(&new_evsels, list);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
int parse_events_load_bpf_obj(struct parse_events_state *parse_state,
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
struct list_head *list,
|
2016-02-22 12:10:36 +03:00
|
|
|
struct bpf_object *obj,
|
|
|
|
struct list_head *head_config)
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
{
|
|
|
|
int err;
|
|
|
|
char errbuf[BUFSIZ];
|
2017-08-17 22:13:34 +03:00
|
|
|
struct __add_bpf_event_param param = {parse_state, list, head_config};
|
perf tools: Create probe points for BPF programs
This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.
By utilizing the new probing API, this patch creates probe points during
event parsing.
To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.
strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.
Committer note:
Trying it:
To build a test eBPF object file:
I am testing using a script I built from the 'perf test -v LLVM' output:
$ cat ~/bin/hello-ebpf
export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
export WORKING_DIR=/lib/modules/4.2.0/build
export CLANG_SOURCE=-
export CLANG_OPTIONS=-xc
OBJ=/tmp/foo.o
rm -f $OBJ
echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ
---
First asking to put a probe in a function not present in the kernel
(misses the initial _):
$ perf record --event /tmp/foo.o sleep 1
Probe point 'do_fork' not found.
event syntax error: '/tmp/foo.o'
\___ You need to check probing points in BPF file
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
---
Now, with "__attribute__((section("fork=_do_fork"), used)):
$ grep _do_fork /proc/kallsyms
ffffffff81099ab0 T _do_fork
$ perf record --event /tmp/foo.o sleep 1
Failed to open kprobe_events: Permission denied
event syntax error: '/tmp/foo.o'
\___ Permission denied
---
Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.
Lets try as root instead:
# perf record --event /tmp/foo.o sleep 1
Lowering default frequency rate to 1000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# perf evlist
/tmp/foo.o
[root@felicio ~]# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
---
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:15 +03:00
|
|
|
static bool registered_unprobe_atexit = false;
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
|
|
|
|
if (IS_ERR(obj) || !obj) {
|
|
|
|
snprintf(errbuf, sizeof(errbuf),
|
|
|
|
"Internal error: load bpf obj with NULL");
|
|
|
|
err = -EINVAL;
|
|
|
|
goto errout;
|
|
|
|
}
|
|
|
|
|
perf tools: Create probe points for BPF programs
This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.
By utilizing the new probing API, this patch creates probe points during
event parsing.
To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.
strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.
Committer note:
Trying it:
To build a test eBPF object file:
I am testing using a script I built from the 'perf test -v LLVM' output:
$ cat ~/bin/hello-ebpf
export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
export WORKING_DIR=/lib/modules/4.2.0/build
export CLANG_SOURCE=-
export CLANG_OPTIONS=-xc
OBJ=/tmp/foo.o
rm -f $OBJ
echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ
---
First asking to put a probe in a function not present in the kernel
(misses the initial _):
$ perf record --event /tmp/foo.o sleep 1
Probe point 'do_fork' not found.
event syntax error: '/tmp/foo.o'
\___ You need to check probing points in BPF file
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
---
Now, with "__attribute__((section("fork=_do_fork"), used)):
$ grep _do_fork /proc/kallsyms
ffffffff81099ab0 T _do_fork
$ perf record --event /tmp/foo.o sleep 1
Failed to open kprobe_events: Permission denied
event syntax error: '/tmp/foo.o'
\___ Permission denied
---
Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.
Lets try as root instead:
# perf record --event /tmp/foo.o sleep 1
Lowering default frequency rate to 1000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# perf evlist
/tmp/foo.o
[root@felicio ~]# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
---
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:15 +03:00
|
|
|
/*
|
|
|
|
* Register atexit handler before calling bpf__probe() so
|
|
|
|
* bpf__probe() don't need to unprobe probe points its already
|
|
|
|
* created when failure.
|
|
|
|
*/
|
|
|
|
if (!registered_unprobe_atexit) {
|
|
|
|
atexit(bpf__clear);
|
|
|
|
registered_unprobe_atexit = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = bpf__probe(obj);
|
|
|
|
if (err) {
|
|
|
|
bpf__strerror_probe(obj, err, errbuf, sizeof(errbuf));
|
|
|
|
goto errout;
|
|
|
|
}
|
|
|
|
|
perf tools: Load eBPF object into kernel
This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.
Committer notes:
Testing it:
When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:
int _version __attribute__((section("version"), used)) = 0x40100;
For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:
# perf record --event /tmp/foo.o sleep 1
libbpf: load bpf program failed: Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
libbpf: -- END LOG --
libbpf: failed to load program 'fork=_do_fork'
libbpf: failed to load object '/tmp/foo.o'
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.202 MB perf.data ]
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:16 +03:00
|
|
|
err = bpf__load(obj);
|
|
|
|
if (err) {
|
|
|
|
bpf__strerror_load(obj, err, errbuf, sizeof(errbuf));
|
|
|
|
goto errout;
|
|
|
|
}
|
|
|
|
|
2016-07-13 13:44:04 +03:00
|
|
|
err = bpf__foreach_event(obj, add_bpf_event, ¶m);
|
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:17 +03:00
|
|
|
if (err) {
|
|
|
|
snprintf(errbuf, sizeof(errbuf),
|
|
|
|
"Attach events in BPF object failed");
|
|
|
|
goto errout;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
errout:
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_state->error->help = strdup("(add -v to see detail)");
|
|
|
|
parse_state->error->str = strdup(errbuf);
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
static int
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_events_config_bpf(struct parse_events_state *parse_state,
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
struct bpf_object *obj,
|
|
|
|
struct list_head *head_config)
|
|
|
|
{
|
|
|
|
struct parse_events_term *term;
|
|
|
|
int error_pos;
|
|
|
|
|
|
|
|
if (!head_config || list_empty(head_config))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
list_for_each_entry(term, head_config, list) {
|
|
|
|
char errbuf[BUFSIZ];
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (term->type_term != PARSE_EVENTS__TERM_TYPE_USER) {
|
|
|
|
snprintf(errbuf, sizeof(errbuf),
|
|
|
|
"Invalid config term for BPF object");
|
|
|
|
errbuf[BUFSIZ - 1] = '\0';
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_state->error->idx = term->err_term;
|
|
|
|
parse_state->error->str = strdup(errbuf);
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
err = bpf__config_obj(obj, term, parse_state->evlist, &error_pos);
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
if (err) {
|
2017-08-17 22:13:34 +03:00
|
|
|
bpf__strerror_config_obj(obj, term, parse_state->evlist,
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
&error_pos, err, errbuf,
|
|
|
|
sizeof(errbuf));
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_state->error->help = strdup(
|
perf tools: Enable passing event to BPF object
A new syntax is added to the parser so that the user can access
predefined perf events in BPF objects.
After this patch, BPF programs for perf are finally able to utilize
bpf_perf_event_read() introduced in commit 35578d798400 ("bpf: Implement
function bpf_perf_event_read() that get the selected hardware PMU
counter").
Test result:
# cat test_bpf_map_2.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_read)(struct bpf_map_def *, int) =
(void *)BPF_FUNC_perf_event_read;
struct bpf_map_def SEC("maps") pmu_map = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = __NR_CPUS__,
};
SEC("func_write=sys_write")
int func_write(void *ctx)
{
unsigned long long val;
char fmt[] = "sys_write: pmu=%llu\n";
val = perf_event_read(&pmu_map, get_smp_processor_id());
trace_printk(fmt, sizeof(fmt), val);
return 0;
}
SEC("func_write_return=sys_write%return")
int func_write_return(void *ctx)
{
unsigned long long val = 0;
char fmt[] = "sys_write_return: pmu=%llu\n";
val = perf_event_read(&pmu_map, get_smp_processor_id());
trace_printk(fmt, sizeof(fmt), val);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Normal case:
# echo "" > /sys/kernel/debug/tracing/trace
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls /
[SNIP]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (7 samples) ]
# cat /sys/kernel/debug/tracing/trace | grep ls
ls-17066 [000] d... 938449.863301: : sys_write: pmu=1157327
ls-17066 [000] dN.. 938449.863342: : sys_write_return: pmu=1225218
ls-17066 [000] d... 938449.863349: : sys_write: pmu=1241922
ls-17066 [000] dN.. 938449.863369: : sys_write_return: pmu=1267445
Normal case (system wide):
# echo "" > /sys/kernel/debug/tracing/trace
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.811 MB perf.data (120 samples) ]
# cat /sys/kernel/debug/tracing/trace | grep -v '18446744073709551594' | grep -v perf | head -n 20
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
gmain-30828 [002] d... 2740551.068992: : sys_write: pmu=84373
gmain-30828 [002] d... 2740551.068992: : sys_write_return: pmu=87696
gmain-30828 [002] d... 2740551.068996: : sys_write: pmu=100658
gmain-30828 [002] d... 2740551.068997: : sys_write_return: pmu=102572
Error case 1:
# perf record -e './test_bpf_map_2.c' ls /
[SNIP]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace | grep ls
ls-17115 [007] d... 2724279.665625: : sys_write: pmu=18446744073709551614
ls-17115 [007] dN.. 2724279.665651: : sys_write_return: pmu=18446744073709551614
ls-17115 [007] d... 2724279.665658: : sys_write: pmu=18446744073709551614
ls-17115 [007] dN.. 2724279.665677: : sys_write_return: pmu=18446744073709551614
(18446744073709551614 is 0xfffffffffffffffe (-2))
Error case 2:
# perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=evt/' -a
event syntax error: '..ps:pmu_map.event=evt/'
\___ Event not found for map setting
Hint: Valid config terms:
map:[<arraymap>].value=[value]
map:[<eventmap>].event=[event]
[SNIP]
Error case 3:
# ls /proc/2348/task/
2348 2505 2506 2507 2508
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -p 2348
ERROR: Apply config to BPF failed: Cannot set event to BPF map in multi-thread tracing
Error case 4:
# perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls /
ERROR: Apply config to BPF failed: Doesn't support inherit event (Hint: use -i to turn off inherit)
Error case 5:
# perf record -i -e raw_syscalls:sys_enter -e './test_bpf_map_2.c/map:pmu_map.event=raw_syscalls:sys_enter/' ls
ERROR: Apply config to BPF failed: Can only put raw, hardware and BPF output event into a BPF map
Error case 6:
# perf record -i -e './test_bpf_map_2.c/map:pmu_map.event=123/' ls /
event syntax error: '.._map.event=123/'
\___ Incorrect value type for map
[SNIP]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-7-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:33 +03:00
|
|
|
"Hint:\tValid config terms:\n"
|
perf tools: Enable indices setting syntax for BPF map
This patch introduces a new syntax to perf event parser:
# perf record -e './test_bpf_map_3.c/map:channel.value[0,1,2,3...5]=101/' usleep 2
By utilizing the basic facilities in bpf-loader.c which allow setting
different slots in a BPF map separately, the newly introduced syntax
allows perf to control specific elements in a BPF map.
Test result:
# cat ./test_bpf_map_3.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(unsigned char),
.max_entries = 100,
};
SEC("func=hrtimer_nanosleep rqtp->tv_nsec")
int func(void *ctx, int err, long nsec)
{
char fmt[] = "%ld\n";
long usec = nsec * 0x10624dd3 >> 38; // nsec / 1000
int key = (int)usec;
unsigned char *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), (unsigned char)*pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Normal case:
# echo "" > /sys/kernel/debug/tracing/trace
# ./perf record -e './test_bpf_map_3.c/map:channel.value[0,1,2,3...5]=101/' usleep 2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace | grep usleep
usleep-405 [004] d... 2745423.547822: : 101
# ./perf record -e './test_bpf_map_3.c/map:channel.value[0...9,20...29]=102,map:channel.value[10...19]=103/' usleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# ./perf record -e './test_bpf_map_3.c/map:channel.value[0...9,20...29]=102,map:channel.value[10...19]=103/' usleep 15
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace | grep usleep
usleep-405 [004] d... 2745423.547822: : 101
usleep-655 [006] d... 2745434.122814: : 102
usleep-904 [006] d... 2745439.916264: : 103
# ./perf record -e './test_bpf_map_3.c/map:channel.value[all]=104/' usleep 99
# cat /sys/kernel/debug/tracing/trace | grep usleep
usleep-405 [004] d... 2745423.547822: : 101
usleep-655 [006] d... 2745434.122814: : 102
usleep-904 [006] d... 2745439.916264: : 103
usleep-1537 [003] d... 2745538.053737: : 104
Error case:
# ./perf record -e './test_bpf_map_3.c/map:channel.value[10...1000]=104/' usleep 99
event syntax error: '..annel.value[10...1000]=104/'
\___ Index too large
Hint: Valid config terms:
map:[<arraymap>].value<indices>=[value]
map:[<eventmap>].event<indices>=[event]
where <indices> is something like [0,3...5] or [all]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:35 +03:00
|
|
|
" \tmap:[<arraymap>].value<indices>=[value]\n"
|
|
|
|
" \tmap:[<eventmap>].event<indices>=[event]\n"
|
perf tools: Enable passing event to BPF object
A new syntax is added to the parser so that the user can access
predefined perf events in BPF objects.
After this patch, BPF programs for perf are finally able to utilize
bpf_perf_event_read() introduced in commit 35578d798400 ("bpf: Implement
function bpf_perf_event_read() that get the selected hardware PMU
counter").
Test result:
# cat test_bpf_map_2.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_read)(struct bpf_map_def *, int) =
(void *)BPF_FUNC_perf_event_read;
struct bpf_map_def SEC("maps") pmu_map = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = __NR_CPUS__,
};
SEC("func_write=sys_write")
int func_write(void *ctx)
{
unsigned long long val;
char fmt[] = "sys_write: pmu=%llu\n";
val = perf_event_read(&pmu_map, get_smp_processor_id());
trace_printk(fmt, sizeof(fmt), val);
return 0;
}
SEC("func_write_return=sys_write%return")
int func_write_return(void *ctx)
{
unsigned long long val = 0;
char fmt[] = "sys_write_return: pmu=%llu\n";
val = perf_event_read(&pmu_map, get_smp_processor_id());
trace_printk(fmt, sizeof(fmt), val);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Normal case:
# echo "" > /sys/kernel/debug/tracing/trace
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls /
[SNIP]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (7 samples) ]
# cat /sys/kernel/debug/tracing/trace | grep ls
ls-17066 [000] d... 938449.863301: : sys_write: pmu=1157327
ls-17066 [000] dN.. 938449.863342: : sys_write_return: pmu=1225218
ls-17066 [000] d... 938449.863349: : sys_write: pmu=1241922
ls-17066 [000] dN.. 938449.863369: : sys_write_return: pmu=1267445
Normal case (system wide):
# echo "" > /sys/kernel/debug/tracing/trace
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.811 MB perf.data (120 samples) ]
# cat /sys/kernel/debug/tracing/trace | grep -v '18446744073709551594' | grep -v perf | head -n 20
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
gmain-30828 [002] d... 2740551.068992: : sys_write: pmu=84373
gmain-30828 [002] d... 2740551.068992: : sys_write_return: pmu=87696
gmain-30828 [002] d... 2740551.068996: : sys_write: pmu=100658
gmain-30828 [002] d... 2740551.068997: : sys_write_return: pmu=102572
Error case 1:
# perf record -e './test_bpf_map_2.c' ls /
[SNIP]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace | grep ls
ls-17115 [007] d... 2724279.665625: : sys_write: pmu=18446744073709551614
ls-17115 [007] dN.. 2724279.665651: : sys_write_return: pmu=18446744073709551614
ls-17115 [007] d... 2724279.665658: : sys_write: pmu=18446744073709551614
ls-17115 [007] dN.. 2724279.665677: : sys_write_return: pmu=18446744073709551614
(18446744073709551614 is 0xfffffffffffffffe (-2))
Error case 2:
# perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=evt/' -a
event syntax error: '..ps:pmu_map.event=evt/'
\___ Event not found for map setting
Hint: Valid config terms:
map:[<arraymap>].value=[value]
map:[<eventmap>].event=[event]
[SNIP]
Error case 3:
# ls /proc/2348/task/
2348 2505 2506 2507 2508
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -p 2348
ERROR: Apply config to BPF failed: Cannot set event to BPF map in multi-thread tracing
Error case 4:
# perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls /
ERROR: Apply config to BPF failed: Doesn't support inherit event (Hint: use -i to turn off inherit)
Error case 5:
# perf record -i -e raw_syscalls:sys_enter -e './test_bpf_map_2.c/map:pmu_map.event=raw_syscalls:sys_enter/' ls
ERROR: Apply config to BPF failed: Can only put raw, hardware and BPF output event into a BPF map
Error case 6:
# perf record -i -e './test_bpf_map_2.c/map:pmu_map.event=123/' ls /
event syntax error: '.._map.event=123/'
\___ Incorrect value type for map
[SNIP]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-7-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:33 +03:00
|
|
|
"\n"
|
perf tools: Enable indices setting syntax for BPF map
This patch introduces a new syntax to perf event parser:
# perf record -e './test_bpf_map_3.c/map:channel.value[0,1,2,3...5]=101/' usleep 2
By utilizing the basic facilities in bpf-loader.c which allow setting
different slots in a BPF map separately, the newly introduced syntax
allows perf to control specific elements in a BPF map.
Test result:
# cat ./test_bpf_map_3.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(unsigned char),
.max_entries = 100,
};
SEC("func=hrtimer_nanosleep rqtp->tv_nsec")
int func(void *ctx, int err, long nsec)
{
char fmt[] = "%ld\n";
long usec = nsec * 0x10624dd3 >> 38; // nsec / 1000
int key = (int)usec;
unsigned char *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), (unsigned char)*pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Normal case:
# echo "" > /sys/kernel/debug/tracing/trace
# ./perf record -e './test_bpf_map_3.c/map:channel.value[0,1,2,3...5]=101/' usleep 2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace | grep usleep
usleep-405 [004] d... 2745423.547822: : 101
# ./perf record -e './test_bpf_map_3.c/map:channel.value[0...9,20...29]=102,map:channel.value[10...19]=103/' usleep 3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# ./perf record -e './test_bpf_map_3.c/map:channel.value[0...9,20...29]=102,map:channel.value[10...19]=103/' usleep 15
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace | grep usleep
usleep-405 [004] d... 2745423.547822: : 101
usleep-655 [006] d... 2745434.122814: : 102
usleep-904 [006] d... 2745439.916264: : 103
# ./perf record -e './test_bpf_map_3.c/map:channel.value[all]=104/' usleep 99
# cat /sys/kernel/debug/tracing/trace | grep usleep
usleep-405 [004] d... 2745423.547822: : 101
usleep-655 [006] d... 2745434.122814: : 102
usleep-904 [006] d... 2745439.916264: : 103
usleep-1537 [003] d... 2745538.053737: : 104
Error case:
# ./perf record -e './test_bpf_map_3.c/map:channel.value[10...1000]=104/' usleep 99
event syntax error: '..annel.value[10...1000]=104/'
\___ Index too large
Hint: Valid config terms:
map:[<arraymap>].value<indices>=[value]
map:[<eventmap>].event<indices>=[event]
where <indices> is something like [0,3...5] or [all]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:35 +03:00
|
|
|
" \twhere <indices> is something like [0,3...5] or [all]\n"
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
" \t(add -v to see detail)");
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_state->error->str = strdup(errbuf);
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
if (err == -BPF_LOADER_ERRNO__OBJCONF_MAP_VALUE)
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_state->error->idx = term->err_val;
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
else
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_state->error->idx = term->err_term + error_pos;
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-02-22 12:10:36 +03:00
|
|
|
/*
|
|
|
|
* Split config terms:
|
|
|
|
* perf record -e bpf.c/call-graph=fp,map:array.value[0]=1/ ...
|
|
|
|
* 'call-graph=fp' is 'evt config', should be applied to each
|
|
|
|
* events in bpf.c.
|
|
|
|
* 'map:array.value[0]=1' is 'obj config', should be processed
|
|
|
|
* with parse_events_config_bpf.
|
|
|
|
*
|
|
|
|
* Move object config terms from the first list to obj_head_config.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
split_bpf_config_terms(struct list_head *evt_head_config,
|
|
|
|
struct list_head *obj_head_config)
|
|
|
|
{
|
|
|
|
struct parse_events_term *term, *temp;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Currectly, all possible user config term
|
|
|
|
* belong to bpf object. parse_events__is_hardcoded_term()
|
|
|
|
* happends to be a good flag.
|
|
|
|
*
|
|
|
|
* See parse_events_config_bpf() and
|
|
|
|
* config_term_tracepoint().
|
|
|
|
*/
|
|
|
|
list_for_each_entry_safe(term, temp, evt_head_config, list)
|
|
|
|
if (!parse_events__is_hardcoded_term(term))
|
|
|
|
list_move_tail(&term->list, obj_head_config);
|
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
int parse_events_load_bpf(struct parse_events_state *parse_state,
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
struct list_head *list,
|
2015-10-14 15:41:20 +03:00
|
|
|
char *bpf_file_name,
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
bool source,
|
|
|
|
struct list_head *head_config)
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
{
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
int err;
|
2016-02-22 12:10:36 +03:00
|
|
|
struct bpf_object *obj;
|
|
|
|
LIST_HEAD(obj_head_config);
|
|
|
|
|
|
|
|
if (head_config)
|
|
|
|
split_bpf_config_terms(head_config, &obj_head_config);
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
|
2015-10-14 15:41:20 +03:00
|
|
|
obj = bpf__prepare_load(bpf_file_name, source);
|
2015-11-06 16:49:37 +03:00
|
|
|
if (IS_ERR(obj)) {
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
char errbuf[BUFSIZ];
|
|
|
|
|
2015-11-06 16:49:37 +03:00
|
|
|
err = PTR_ERR(obj);
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
|
|
|
|
if (err == -ENOTSUP)
|
|
|
|
snprintf(errbuf, sizeof(errbuf),
|
|
|
|
"BPF support is not compiled");
|
|
|
|
else
|
2015-11-06 16:58:09 +03:00
|
|
|
bpf__strerror_prepare_load(bpf_file_name,
|
|
|
|
source,
|
|
|
|
-err, errbuf,
|
|
|
|
sizeof(errbuf));
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_state->error->help = strdup("(add -v to see detail)");
|
|
|
|
parse_state->error->str = strdup(errbuf);
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
err = parse_events_load_bpf_obj(parse_state, list, obj, head_config);
|
perf tools: Enable BPF object configure syntax
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:31 +03:00
|
|
|
if (err)
|
|
|
|
return err;
|
2017-08-17 22:13:34 +03:00
|
|
|
err = parse_events_config_bpf(parse_state, obj, &obj_head_config);
|
2016-02-22 12:10:36 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Caller doesn't know anything about obj_head_config,
|
|
|
|
* so combine them together again before returnning.
|
|
|
|
*/
|
|
|
|
if (head_config)
|
|
|
|
list_splice_tail(&obj_head_config, head_config);
|
|
|
|
return err;
|
perf tools: Enable passing bpf object file to --event
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:14 +03:00
|
|
|
}
|
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
static int
|
|
|
|
parse_breakpoint_type(const char *type, struct perf_event_attr *attr)
|
2009-11-23 17:42:35 +03:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 3; i++) {
|
2012-03-15 23:09:15 +04:00
|
|
|
if (!type || !type[i])
|
2009-11-23 17:42:35 +03:00
|
|
|
break;
|
|
|
|
|
2012-06-29 11:22:54 +04:00
|
|
|
#define CHECK_SET_TYPE(bit) \
|
|
|
|
do { \
|
|
|
|
if (attr->bp_type & bit) \
|
|
|
|
return -EINVAL; \
|
|
|
|
else \
|
|
|
|
attr->bp_type |= bit; \
|
|
|
|
} while (0)
|
|
|
|
|
2009-11-23 17:42:35 +03:00
|
|
|
switch (type[i]) {
|
|
|
|
case 'r':
|
2012-06-29 11:22:54 +04:00
|
|
|
CHECK_SET_TYPE(HW_BREAKPOINT_R);
|
2009-11-23 17:42:35 +03:00
|
|
|
break;
|
|
|
|
case 'w':
|
2012-06-29 11:22:54 +04:00
|
|
|
CHECK_SET_TYPE(HW_BREAKPOINT_W);
|
2009-11-23 17:42:35 +03:00
|
|
|
break;
|
|
|
|
case 'x':
|
2012-06-29 11:22:54 +04:00
|
|
|
CHECK_SET_TYPE(HW_BREAKPOINT_X);
|
2009-11-23 17:42:35 +03:00
|
|
|
break;
|
|
|
|
default:
|
2012-03-15 23:09:15 +04:00
|
|
|
return -EINVAL;
|
2009-11-23 17:42:35 +03:00
|
|
|
}
|
|
|
|
}
|
2012-03-15 23:09:15 +04:00
|
|
|
|
2012-06-29 11:22:54 +04:00
|
|
|
#undef CHECK_SET_TYPE
|
|
|
|
|
2009-11-23 17:42:35 +03:00
|
|
|
if (!attr->bp_type) /* Default */
|
|
|
|
attr->bp_type = HW_BREAKPOINT_R | HW_BREAKPOINT_W;
|
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
return 0;
|
2009-11-23 17:42:35 +03:00
|
|
|
}
|
|
|
|
|
2013-07-02 23:27:25 +04:00
|
|
|
int parse_events_add_breakpoint(struct list_head *list, int *idx,
|
2014-05-29 19:26:51 +04:00
|
|
|
void *ptr, char *type, u64 len)
|
2009-11-23 17:42:35 +03:00
|
|
|
{
|
2012-03-15 23:09:15 +04:00
|
|
|
struct perf_event_attr attr;
|
2009-11-23 17:42:35 +03:00
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
memset(&attr, 0, sizeof(attr));
|
2012-03-20 22:15:39 +04:00
|
|
|
attr.bp_addr = (unsigned long) ptr;
|
2009-11-23 17:42:35 +03:00
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
if (parse_breakpoint_type(type, &attr))
|
|
|
|
return -EINVAL;
|
2009-11-23 17:42:35 +03:00
|
|
|
|
2014-05-29 19:26:51 +04:00
|
|
|
/* Provide some defaults if len is not specified */
|
|
|
|
if (!len) {
|
|
|
|
if (attr.bp_type == HW_BREAKPOINT_X)
|
|
|
|
len = sizeof(long);
|
|
|
|
else
|
|
|
|
len = HW_BREAKPOINT_LEN_4;
|
|
|
|
}
|
|
|
|
|
|
|
|
attr.bp_len = len;
|
2009-07-01 07:04:34 +04:00
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
attr.type = PERF_TYPE_BREAKPOINT;
|
2012-07-14 23:03:10 +04:00
|
|
|
attr.sample_period = 1;
|
2011-04-27 05:55:40 +04:00
|
|
|
|
2015-07-29 12:42:10 +03:00
|
|
|
return add_event(list, idx, &attr, NULL, NULL);
|
2009-06-22 15:14:28 +04:00
|
|
|
}
|
|
|
|
|
2015-04-22 22:10:22 +03:00
|
|
|
static int check_type_val(struct parse_events_term *term,
|
|
|
|
struct parse_events_error *err,
|
|
|
|
int type)
|
|
|
|
{
|
|
|
|
if (type == term->type_val)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (err) {
|
|
|
|
err->idx = term->err_val;
|
|
|
|
if (type == PARSE_EVENTS__TERM_TYPE_NUM)
|
|
|
|
err->str = strdup("expected numeric value");
|
|
|
|
else
|
|
|
|
err->str = strdup("expected string value");
|
|
|
|
}
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2016-02-19 14:43:57 +03:00
|
|
|
/*
|
|
|
|
* Update according to parse-events.l
|
|
|
|
*/
|
|
|
|
static const char *config_term_names[__PARSE_EVENTS__TERM_TYPE_NR] = {
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_USER] = "<sysfs term>",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_CONFIG] = "config",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_CONFIG1] = "config1",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_CONFIG2] = "config2",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_NAME] = "name",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD] = "period",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_SAMPLE_FREQ] = "freq",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE] = "branch_type",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_TIME] = "time",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_CALLGRAPH] = "call-graph",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_STACKSIZE] = "stack-size",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_NOINHERIT] = "no-inherit",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_INHERIT] = "inherit",
|
perf tools: Per event max-stack settings
The tooling counterpart, now it is possible to do:
# perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ]
# perf evlist -v
sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10
cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4
cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should
be further configurable by means of some .perfconfig knob.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-29 01:03:42 +03:00
|
|
|
[PARSE_EVENTS__TERM_TYPE_MAX_STACK] = "max-stack",
|
perf tools: Enable overwrite settings
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 11:34:45 +03:00
|
|
|
[PARSE_EVENTS__TERM_TYPE_OVERWRITE] = "overwrite",
|
|
|
|
[PARSE_EVENTS__TERM_TYPE_NOOVERWRITE] = "no-overwrite",
|
2016-09-06 19:37:15 +03:00
|
|
|
[PARSE_EVENTS__TERM_TYPE_DRV_CFG] = "driver-config",
|
2016-02-19 14:43:57 +03:00
|
|
|
};
|
|
|
|
|
perf stat: Bail out on unsupported event config modifiers
'perf stat' accepts some config terms but doesn't apply them. For
example:
# perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
# ls
# exit
Performance counter stats for 'bash':
266258061 instructions/no-inherit/
266258061 instructions/inherit/
1.402183915 seconds time elapsed
The result is confusing, because user may expect the first
'instructions' event exclude the 'ls' command.
This patch forbid most of these config terms for 'perf stat'.
Result:
# ./perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
event syntax error: 'instructions/no-inherit/'
\___ 'no-inherit' is not usable in 'perf stat'
...
We can add blocked config terms back when 'perf stat' really supports them.
This patch also removes unavailable config term from error message:
# ./perf stat -e 'instructions/badterm/' ls
event syntax error: 'instructions/badterm/'
\___ unknown term
valid terms: config,config1,config2,name
# ./perf stat -e 'cpu/badterm/' ls
event syntax error: 'cpu/badterm/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 14:43:58 +03:00
|
|
|
static bool config_term_shrinked;
|
|
|
|
|
|
|
|
static bool
|
|
|
|
config_term_avail(int term_type, struct parse_events_error *err)
|
|
|
|
{
|
|
|
|
if (term_type < 0 || term_type >= __PARSE_EVENTS__TERM_TYPE_NR) {
|
|
|
|
err->str = strdup("Invalid term_type");
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
if (!config_term_shrinked)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
switch (term_type) {
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_CONFIG:
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_CONFIG1:
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_CONFIG2:
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_NAME:
|
2016-09-16 01:24:56 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD:
|
perf stat: Bail out on unsupported event config modifiers
'perf stat' accepts some config terms but doesn't apply them. For
example:
# perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
# ls
# exit
Performance counter stats for 'bash':
266258061 instructions/no-inherit/
266258061 instructions/inherit/
1.402183915 seconds time elapsed
The result is confusing, because user may expect the first
'instructions' event exclude the 'ls' command.
This patch forbid most of these config terms for 'perf stat'.
Result:
# ./perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
event syntax error: 'instructions/no-inherit/'
\___ 'no-inherit' is not usable in 'perf stat'
...
We can add blocked config terms back when 'perf stat' really supports them.
This patch also removes unavailable config term from error message:
# ./perf stat -e 'instructions/badterm/' ls
event syntax error: 'instructions/badterm/'
\___ unknown term
valid terms: config,config1,config2,name
# ./perf stat -e 'cpu/badterm/' ls
event syntax error: 'cpu/badterm/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 14:43:58 +03:00
|
|
|
return true;
|
|
|
|
default:
|
|
|
|
if (!err)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
/* term_type is validated so indexing is safe */
|
|
|
|
if (asprintf(&err->str, "'%s' is not usable in 'perf stat'",
|
|
|
|
config_term_names[term_type]) < 0)
|
|
|
|
err->str = NULL;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void parse_events__shrink_config_terms(void)
|
|
|
|
{
|
|
|
|
config_term_shrinked = true;
|
|
|
|
}
|
|
|
|
|
2015-09-28 06:52:13 +03:00
|
|
|
static int config_term_common(struct perf_event_attr *attr,
|
|
|
|
struct parse_events_term *term,
|
|
|
|
struct parse_events_error *err)
|
2012-03-15 23:09:16 +04:00
|
|
|
{
|
2015-04-22 22:10:22 +03:00
|
|
|
#define CHECK_TYPE_VAL(type) \
|
|
|
|
do { \
|
|
|
|
if (check_type_val(term, err, PARSE_EVENTS__TERM_TYPE_ ## type)) \
|
|
|
|
return -EINVAL; \
|
2012-04-25 20:24:57 +04:00
|
|
|
} while (0)
|
|
|
|
|
|
|
|
switch (term->type_term) {
|
2012-03-15 23:09:16 +04:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_CONFIG:
|
2012-04-25 20:24:57 +04:00
|
|
|
CHECK_TYPE_VAL(NUM);
|
2012-03-15 23:09:16 +04:00
|
|
|
attr->config = term->val.num;
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_CONFIG1:
|
2012-04-25 20:24:57 +04:00
|
|
|
CHECK_TYPE_VAL(NUM);
|
2012-03-15 23:09:16 +04:00
|
|
|
attr->config1 = term->val.num;
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_CONFIG2:
|
2012-04-25 20:24:57 +04:00
|
|
|
CHECK_TYPE_VAL(NUM);
|
2012-03-15 23:09:16 +04:00
|
|
|
attr->config2 = term->val.num;
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD:
|
2012-04-25 20:24:57 +04:00
|
|
|
CHECK_TYPE_VAL(NUM);
|
2012-03-15 23:09:16 +04:00
|
|
|
break;
|
2015-08-09 09:45:23 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_SAMPLE_FREQ:
|
|
|
|
CHECK_TYPE_VAL(NUM);
|
|
|
|
break;
|
2012-03-15 23:09:16 +04:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE:
|
2016-10-13 00:02:06 +03:00
|
|
|
CHECK_TYPE_VAL(STR);
|
|
|
|
if (strcmp(term->val.str, "no") &&
|
|
|
|
parse_branch_str(term->val.str, &attr->branch_sample_type)) {
|
|
|
|
err->str = strdup("invalid branch sample type");
|
|
|
|
err->idx = term->err_val;
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2012-03-15 23:09:16 +04:00
|
|
|
break;
|
2015-08-04 11:30:19 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_TIME:
|
|
|
|
CHECK_TYPE_VAL(NUM);
|
|
|
|
if (term->val.num > 1) {
|
|
|
|
err->str = strdup("expected 0 or 1");
|
|
|
|
err->idx = term->err_val;
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
break;
|
perf callchain: Per-event type selection support
This patchkit adds the ability to set callgraph mode (fp, dwarf, lbr) per
event. This in term can reduce sampling overhead and the size of the
perf.data.
Here is an example.
perf record -e 'cpu/cpu-cycles,period=1000,call-graph=fp,time=1/,cpu/instructions,call-graph=lbr/' sleep 1
perf evlist -v
cpu/cpu-cycles,period=1000,call-graph=fp,time=1/: type: 4, size: 112,
config: 0x3c, { sample_period, sample_freq }: 1000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|IDENTIFIER, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
1, exclude_guest: 1, mmap2: 1, comm_exec: 1
cpu/instructions,call-graph=lbr/: type: 4, size: 112, config: 0xc0, {
sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID,
disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1,
exclude_guest: 1
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-11 13:30:47 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_CALLGRAPH:
|
|
|
|
CHECK_TYPE_VAL(STR);
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_STACKSIZE:
|
|
|
|
CHECK_TYPE_VAL(NUM);
|
|
|
|
break;
|
perf tools: Enable pre-event inherit setting by config terms
This patch allows perf record setting event's attr.inherit bit by
config terms like:
# perf record -e cycles/no-inherit/ ...
# perf record -e cycles/inherit/ ...
So user can control inherit bit for each event separately.
In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.
Basic result with and without inherit:
# perf record -e cycles -e instructions ./a.out
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
# perf report --stdio
# ...
# Samples: 23K of event 'cycles'
# Event count (approx.): 23641752891
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30428312415
# perf record -i -e cycles -e instructions ./a.out
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
...
# Samples: 12K of event 'cycles'
# Event count (approx.): 11699501775
...
# Samples: 12K of event 'instructions'
# Event count (approx.): 15058023559
Cancel inherit for one event when globally enable:
# perf record -e cycles/no-inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
...
# Samples: 12K of event 'cycles/no-inherit/'
# Event count (approx.): 11895759282
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30668000441
Enable inherit for one event when globally disable:
# perf record -i -e cycles/inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
...
# Samples: 23K of event 'cycles/inherit/'
# Event count (approx.): 23285400229
...
# Samples: 11K of event 'instructions'
# Event count (approx.): 14969050259
Committer note:
One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:
# perf record -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:
# perf record --no-inherit -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
No inherit bit set, then disabling it and setting just on the cycles event:
# perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
# perf evlist -v
cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:
[root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
------------------------------------------------------------
perf_event_attr:
size 112
config 0x1
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
<SNIP>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28 13:55:02 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_INHERIT:
|
|
|
|
CHECK_TYPE_VAL(NUM);
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_NOINHERIT:
|
|
|
|
CHECK_TYPE_VAL(NUM);
|
|
|
|
break;
|
perf tools: Enable overwrite settings
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 11:34:45 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_OVERWRITE:
|
|
|
|
CHECK_TYPE_VAL(NUM);
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_NOOVERWRITE:
|
|
|
|
CHECK_TYPE_VAL(NUM);
|
|
|
|
break;
|
2012-05-21 11:12:53 +04:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_NAME:
|
|
|
|
CHECK_TYPE_VAL(STR);
|
|
|
|
break;
|
perf tools: Per event max-stack settings
The tooling counterpart, now it is possible to do:
# perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ]
# perf evlist -v
sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10
cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4
cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should
be further configurable by means of some .perfconfig knob.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-29 01:03:42 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_MAX_STACK:
|
|
|
|
CHECK_TYPE_VAL(NUM);
|
|
|
|
break;
|
2012-03-15 23:09:16 +04:00
|
|
|
default:
|
perf tools: Show proper error message for wrong terms of hw/sw events
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 06:52:14 +03:00
|
|
|
err->str = strdup("unknown term");
|
|
|
|
err->idx = term->err_term;
|
|
|
|
err->help = parse_events_formats_error_string(NULL);
|
2012-03-15 23:09:16 +04:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
2012-04-25 20:24:57 +04:00
|
|
|
|
perf stat: Bail out on unsupported event config modifiers
'perf stat' accepts some config terms but doesn't apply them. For
example:
# perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
# ls
# exit
Performance counter stats for 'bash':
266258061 instructions/no-inherit/
266258061 instructions/inherit/
1.402183915 seconds time elapsed
The result is confusing, because user may expect the first
'instructions' event exclude the 'ls' command.
This patch forbid most of these config terms for 'perf stat'.
Result:
# ./perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
event syntax error: 'instructions/no-inherit/'
\___ 'no-inherit' is not usable in 'perf stat'
...
We can add blocked config terms back when 'perf stat' really supports them.
This patch also removes unavailable config term from error message:
# ./perf stat -e 'instructions/badterm/' ls
event syntax error: 'instructions/badterm/'
\___ unknown term
valid terms: config,config1,config2,name
# ./perf stat -e 'cpu/badterm/' ls
event syntax error: 'cpu/badterm/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 14:43:58 +03:00
|
|
|
/*
|
|
|
|
* Check term availbility after basic checking so
|
|
|
|
* PARSE_EVENTS__TERM_TYPE_USER can be found and filtered.
|
|
|
|
*
|
|
|
|
* If check availbility at the entry of this function,
|
|
|
|
* user will see "'<sysfs term>' is not usable in 'perf stat'"
|
|
|
|
* if an invalid config term is provided for legacy events
|
|
|
|
* (for example, instructions/badterm/...), which is confusing.
|
|
|
|
*/
|
|
|
|
if (!config_term_avail(term->type_term, err))
|
|
|
|
return -EINVAL;
|
2012-03-15 23:09:16 +04:00
|
|
|
return 0;
|
2012-04-25 20:24:57 +04:00
|
|
|
#undef CHECK_TYPE_VAL
|
2012-03-15 23:09:16 +04:00
|
|
|
}
|
|
|
|
|
2015-09-28 06:52:13 +03:00
|
|
|
static int config_term_pmu(struct perf_event_attr *attr,
|
|
|
|
struct parse_events_term *term,
|
|
|
|
struct parse_events_error *err)
|
|
|
|
{
|
2016-09-06 19:37:15 +03:00
|
|
|
if (term->type_term == PARSE_EVENTS__TERM_TYPE_USER ||
|
|
|
|
term->type_term == PARSE_EVENTS__TERM_TYPE_DRV_CFG)
|
2015-09-28 06:52:13 +03:00
|
|
|
/*
|
|
|
|
* Always succeed for sysfs terms, as we dont know
|
|
|
|
* at this point what type they need to have.
|
|
|
|
*/
|
|
|
|
return 0;
|
|
|
|
else
|
|
|
|
return config_term_common(attr, term, err);
|
|
|
|
}
|
|
|
|
|
2015-09-28 06:52:16 +03:00
|
|
|
static int config_term_tracepoint(struct perf_event_attr *attr,
|
|
|
|
struct parse_events_term *term,
|
|
|
|
struct parse_events_error *err)
|
|
|
|
{
|
|
|
|
switch (term->type_term) {
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_CALLGRAPH:
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_STACKSIZE:
|
perf tools: Enable pre-event inherit setting by config terms
This patch allows perf record setting event's attr.inherit bit by
config terms like:
# perf record -e cycles/no-inherit/ ...
# perf record -e cycles/inherit/ ...
So user can control inherit bit for each event separately.
In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.
Basic result with and without inherit:
# perf record -e cycles -e instructions ./a.out
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
# perf report --stdio
# ...
# Samples: 23K of event 'cycles'
# Event count (approx.): 23641752891
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30428312415
# perf record -i -e cycles -e instructions ./a.out
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
...
# Samples: 12K of event 'cycles'
# Event count (approx.): 11699501775
...
# Samples: 12K of event 'instructions'
# Event count (approx.): 15058023559
Cancel inherit for one event when globally enable:
# perf record -e cycles/no-inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
...
# Samples: 12K of event 'cycles/no-inherit/'
# Event count (approx.): 11895759282
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30668000441
Enable inherit for one event when globally disable:
# perf record -i -e cycles/inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
...
# Samples: 23K of event 'cycles/inherit/'
# Event count (approx.): 23285400229
...
# Samples: 11K of event 'instructions'
# Event count (approx.): 14969050259
Committer note:
One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:
# perf record -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:
# perf record --no-inherit -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
No inherit bit set, then disabling it and setting just on the cycles event:
# perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
# perf evlist -v
cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:
[root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
------------------------------------------------------------
perf_event_attr:
size 112
config 0x1
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
<SNIP>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28 13:55:02 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_INHERIT:
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_NOINHERIT:
|
perf tools: Per event max-stack settings
The tooling counterpart, now it is possible to do:
# perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ]
# perf evlist -v
sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10
cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4
cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should
be further configurable by means of some .perfconfig knob.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-29 01:03:42 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_MAX_STACK:
|
perf tools: Enable overwrite settings
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 11:34:45 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_OVERWRITE:
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_NOOVERWRITE:
|
2015-09-28 06:52:16 +03:00
|
|
|
return config_term_common(attr, term, err);
|
|
|
|
default:
|
|
|
|
if (err) {
|
|
|
|
err->idx = term->err_term;
|
|
|
|
err->str = strdup("unknown term");
|
|
|
|
err->help = strdup("valid terms: call-graph,stack-size\n");
|
|
|
|
}
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-03-15 23:09:16 +04:00
|
|
|
static int config_attr(struct perf_event_attr *attr,
|
2015-04-22 22:10:22 +03:00
|
|
|
struct list_head *head,
|
2015-09-28 06:52:13 +03:00
|
|
|
struct parse_events_error *err,
|
|
|
|
config_term_func_t config_term)
|
2012-03-15 23:09:16 +04:00
|
|
|
{
|
2013-01-18 23:29:49 +04:00
|
|
|
struct parse_events_term *term;
|
2012-03-15 23:09:16 +04:00
|
|
|
|
|
|
|
list_for_each_entry(term, head, list)
|
2015-04-22 22:10:22 +03:00
|
|
|
if (config_term(attr, term, err))
|
2012-03-15 23:09:16 +04:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-07-29 12:42:10 +03:00
|
|
|
static int get_config_terms(struct list_head *head_config,
|
|
|
|
struct list_head *head_terms __maybe_unused)
|
|
|
|
{
|
|
|
|
#define ADD_CONFIG_TERM(__type, __name, __val) \
|
|
|
|
do { \
|
|
|
|
struct perf_evsel_config_term *__t; \
|
|
|
|
\
|
|
|
|
__t = zalloc(sizeof(*__t)); \
|
|
|
|
if (!__t) \
|
|
|
|
return -ENOMEM; \
|
|
|
|
\
|
|
|
|
INIT_LIST_HEAD(&__t->list); \
|
|
|
|
__t->type = PERF_EVSEL__CONFIG_TERM_ ## __type; \
|
|
|
|
__t->val.__name = __val; \
|
2017-10-20 23:27:55 +03:00
|
|
|
__t->weak = term->weak; \
|
2015-07-29 12:42:10 +03:00
|
|
|
list_add_tail(&__t->list, head_terms); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
struct parse_events_term *term;
|
|
|
|
|
|
|
|
list_for_each_entry(term, head_config, list) {
|
|
|
|
switch (term->type_term) {
|
2015-07-29 12:42:11 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD:
|
|
|
|
ADD_CONFIG_TERM(PERIOD, period, term->val.num);
|
2015-08-04 11:30:19 +03:00
|
|
|
break;
|
2015-08-09 09:45:23 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_SAMPLE_FREQ:
|
|
|
|
ADD_CONFIG_TERM(FREQ, freq, term->val.num);
|
|
|
|
break;
|
2015-08-04 11:30:19 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_TIME:
|
|
|
|
ADD_CONFIG_TERM(TIME, time, term->val.num);
|
|
|
|
break;
|
perf callchain: Per-event type selection support
This patchkit adds the ability to set callgraph mode (fp, dwarf, lbr) per
event. This in term can reduce sampling overhead and the size of the
perf.data.
Here is an example.
perf record -e 'cpu/cpu-cycles,period=1000,call-graph=fp,time=1/,cpu/instructions,call-graph=lbr/' sleep 1
perf evlist -v
cpu/cpu-cycles,period=1000,call-graph=fp,time=1/: type: 4, size: 112,
config: 0x3c, { sample_period, sample_freq }: 1000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|IDENTIFIER, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
1, exclude_guest: 1, mmap2: 1, comm_exec: 1
cpu/instructions,call-graph=lbr/: type: 4, size: 112, config: 0xc0, {
sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID,
disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1,
exclude_guest: 1
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-11 13:30:47 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_CALLGRAPH:
|
|
|
|
ADD_CONFIG_TERM(CALLGRAPH, callgraph, term->val.str);
|
|
|
|
break;
|
2016-10-13 00:02:06 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE:
|
|
|
|
ADD_CONFIG_TERM(BRANCH, branch, term->val.str);
|
|
|
|
break;
|
perf callchain: Per-event type selection support
This patchkit adds the ability to set callgraph mode (fp, dwarf, lbr) per
event. This in term can reduce sampling overhead and the size of the
perf.data.
Here is an example.
perf record -e 'cpu/cpu-cycles,period=1000,call-graph=fp,time=1/,cpu/instructions,call-graph=lbr/' sleep 1
perf evlist -v
cpu/cpu-cycles,period=1000,call-graph=fp,time=1/: type: 4, size: 112,
config: 0x3c, { sample_period, sample_freq }: 1000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|IDENTIFIER, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
1, exclude_guest: 1, mmap2: 1, comm_exec: 1
cpu/instructions,call-graph=lbr/: type: 4, size: 112, config: 0xc0, {
sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CALLCHAIN|PERIOD|BRANCH_STACK|IDENTIFIER, read_format: ID,
disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1,
exclude_guest: 1
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-11 13:30:47 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_STACKSIZE:
|
|
|
|
ADD_CONFIG_TERM(STACK_USER, stack_user, term->val.num);
|
|
|
|
break;
|
perf tools: Enable pre-event inherit setting by config terms
This patch allows perf record setting event's attr.inherit bit by
config terms like:
# perf record -e cycles/no-inherit/ ...
# perf record -e cycles/inherit/ ...
So user can control inherit bit for each event separately.
In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.
Basic result with and without inherit:
# perf record -e cycles -e instructions ./a.out
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
# perf report --stdio
# ...
# Samples: 23K of event 'cycles'
# Event count (approx.): 23641752891
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30428312415
# perf record -i -e cycles -e instructions ./a.out
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
...
# Samples: 12K of event 'cycles'
# Event count (approx.): 11699501775
...
# Samples: 12K of event 'instructions'
# Event count (approx.): 15058023559
Cancel inherit for one event when globally enable:
# perf record -e cycles/no-inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
...
# Samples: 12K of event 'cycles/no-inherit/'
# Event count (approx.): 11895759282
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30668000441
Enable inherit for one event when globally disable:
# perf record -i -e cycles/inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
...
# Samples: 23K of event 'cycles/inherit/'
# Event count (approx.): 23285400229
...
# Samples: 11K of event 'instructions'
# Event count (approx.): 14969050259
Committer note:
One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:
# perf record -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:
# perf record --no-inherit -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
No inherit bit set, then disabling it and setting just on the cycles event:
# perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
# perf evlist -v
cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:
[root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
------------------------------------------------------------
perf_event_attr:
size 112
config 0x1
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
<SNIP>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28 13:55:02 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_INHERIT:
|
|
|
|
ADD_CONFIG_TERM(INHERIT, inherit, term->val.num ? 1 : 0);
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_NOINHERIT:
|
|
|
|
ADD_CONFIG_TERM(INHERIT, inherit, term->val.num ? 0 : 1);
|
|
|
|
break;
|
perf tools: Per event max-stack settings
The tooling counterpart, now it is possible to do:
# perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ]
# perf evlist -v
sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10
cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4
cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should
be further configurable by means of some .perfconfig knob.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-29 01:03:42 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_MAX_STACK:
|
|
|
|
ADD_CONFIG_TERM(MAX_STACK, max_stack, term->val.num);
|
|
|
|
break;
|
perf tools: Enable overwrite settings
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 11:34:45 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_OVERWRITE:
|
|
|
|
ADD_CONFIG_TERM(OVERWRITE, overwrite, term->val.num ? 1 : 0);
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_NOOVERWRITE:
|
|
|
|
ADD_CONFIG_TERM(OVERWRITE, overwrite, term->val.num ? 0 : 1);
|
|
|
|
break;
|
2016-09-06 19:37:15 +03:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_DRV_CFG:
|
|
|
|
ADD_CONFIG_TERM(DRV_CFG, drv_cfg, term->val.str);
|
|
|
|
break;
|
2015-07-29 12:42:10 +03:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#undef ADD_EVSEL_CONFIG
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-09-28 06:52:16 +03:00
|
|
|
int parse_events_add_tracepoint(struct list_head *list, int *idx,
|
2016-07-13 13:44:03 +03:00
|
|
|
const char *sys, const char *event,
|
2015-09-29 18:05:31 +03:00
|
|
|
struct parse_events_error *err,
|
2015-09-28 06:52:16 +03:00
|
|
|
struct list_head *head_config)
|
|
|
|
{
|
|
|
|
if (head_config) {
|
|
|
|
struct perf_event_attr attr;
|
|
|
|
|
2015-09-29 18:05:31 +03:00
|
|
|
if (config_attr(&attr, head_config, err,
|
2015-09-28 06:52:16 +03:00
|
|
|
config_term_tracepoint))
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (strpbrk(sys, "*?"))
|
|
|
|
return add_tracepoint_multi_sys(list, idx, sys, event,
|
2015-09-29 18:05:31 +03:00
|
|
|
err, head_config);
|
2015-09-28 06:52:16 +03:00
|
|
|
else
|
|
|
|
return add_tracepoint_event(list, idx, sys, event,
|
2015-09-29 18:05:31 +03:00
|
|
|
err, head_config);
|
2015-09-28 06:52:16 +03:00
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
int parse_events_add_numeric(struct parse_events_state *parse_state,
|
2015-04-22 22:10:24 +03:00
|
|
|
struct list_head *list,
|
2012-08-07 21:43:13 +04:00
|
|
|
u32 type, u64 config,
|
2012-03-15 23:09:16 +04:00
|
|
|
struct list_head *head_config)
|
2009-05-26 13:10:09 +04:00
|
|
|
{
|
2012-03-15 23:09:15 +04:00
|
|
|
struct perf_event_attr attr;
|
2015-07-29 12:42:10 +03:00
|
|
|
LIST_HEAD(config_terms);
|
2009-07-01 07:04:34 +04:00
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
memset(&attr, 0, sizeof(attr));
|
|
|
|
attr.type = type;
|
|
|
|
attr.config = config;
|
2012-03-15 23:09:16 +04:00
|
|
|
|
2015-07-29 12:42:10 +03:00
|
|
|
if (head_config) {
|
2017-08-17 22:13:34 +03:00
|
|
|
if (config_attr(&attr, head_config, parse_state->error,
|
2015-09-28 06:52:13 +03:00
|
|
|
config_term_common))
|
2015-07-29 12:42:10 +03:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (get_config_terms(head_config, &config_terms))
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2012-03-15 23:09:16 +04:00
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
return add_event(list, &parse_state->idx, &attr,
|
perf tools: Enable config raw and numeric events
This patch allows setting config terms for raw and numeric events.
For example:
# perf stat -e cycles/name=cyc/ ls
...
1821108 cyc
...
# perf stat -e r6530160/name=event/ ls
...
1103195 event
...
# perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1
...
# perf report --stdio
...
# Samples: 124 of event 'cycles'
46.61% 0.00% swapper [kernel.vmlinux] [k] cpu_startup_entry
41.26% 0.00% swapper [kernel.vmlinux] [k] start_secondary
...
# Samples: 91 of event 'evtx'
...
93.76% 0.00% swapper [kernel.vmlinux] [k] cpu_startup_entry
|
---cpu_startup_entry
|
|--66.63%--call_cpuidle
| cpuidle_enter
| |
...
3 test cases are introduced to test config terms for symbol, raw and
numeric events.
Committer note:
Further testing shows that we can retrieve the event name using 'perf
evlist -v' and looking at the 'config' perf_event_attr field, i.e.:
# perf record -e cycles -e 4:0x6530160/name=evtx,call-graph=fp/ -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.724 MB perf.data (2076 samples) ]
# perf evlist
cycles
evtx
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
evtx: type: 4, size: 112, config: 0x6530160, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-13-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 14:44:00 +03:00
|
|
|
get_config_name(head_config), &config_terms);
|
2009-07-01 07:04:34 +04:00
|
|
|
}
|
2009-05-26 13:10:09 +04:00
|
|
|
|
2018-03-06 17:04:44 +03:00
|
|
|
int parse_events_add_pmu(struct parse_events_state *parse_state,
|
2015-04-22 22:10:19 +03:00
|
|
|
struct list_head *list, char *name,
|
perf stat: Only auto-merge events that are PMU aliases
Peter reported that when he explicitely asked for multiple events with
the same name on the command line it got coalesced into just one line,
i.e.:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
3,269,652 cycles
0.000884123 seconds time elapsed
#
And while there is the --no-merges option to disable that auto-merging,
this is a blunt change in behaviour for such explicit request, so change
the code so that this auto merging is done only when handling the multi
PMU aliases with the same name that introduced this coalescing,
restoring the previous behaviour for the explicit case:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,472,837 cycles
1,472,837 cycles
1,472,837 cycles
0.001764870 seconds time elapsed
#
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 430daf2dc7af ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20170831184122.GK4831@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 21:32:18 +03:00
|
|
|
struct list_head *head_config, bool auto_merge_stats)
|
2012-03-15 23:09:18 +04:00
|
|
|
{
|
|
|
|
struct perf_event_attr attr;
|
2014-09-24 18:04:06 +04:00
|
|
|
struct perf_pmu_info info;
|
2012-03-15 23:09:18 +04:00
|
|
|
struct perf_pmu *pmu;
|
2013-11-12 20:58:49 +04:00
|
|
|
struct perf_evsel *evsel;
|
2017-09-14 00:50:06 +03:00
|
|
|
struct parse_events_error *err = parse_state->error;
|
2015-07-29 12:42:10 +03:00
|
|
|
LIST_HEAD(config_terms);
|
2012-03-15 23:09:18 +04:00
|
|
|
|
|
|
|
pmu = perf_pmu__find(name);
|
2017-09-14 00:50:06 +03:00
|
|
|
if (!pmu) {
|
|
|
|
if (asprintf(&err->str,
|
|
|
|
"Cannot find PMU `%s'. Missing kernel support?",
|
|
|
|
name) < 0)
|
|
|
|
err->str = NULL;
|
2012-03-15 23:09:18 +04:00
|
|
|
return -EINVAL;
|
2017-09-14 00:50:06 +03:00
|
|
|
}
|
2012-03-15 23:09:18 +04:00
|
|
|
|
2014-07-31 10:00:49 +04:00
|
|
|
if (pmu->default_config) {
|
|
|
|
memcpy(&attr, pmu->default_config,
|
|
|
|
sizeof(struct perf_event_attr));
|
|
|
|
} else {
|
|
|
|
memset(&attr, 0, sizeof(attr));
|
|
|
|
}
|
2012-03-15 23:09:18 +04:00
|
|
|
|
2014-08-15 23:08:40 +04:00
|
|
|
if (!head_config) {
|
|
|
|
attr.type = pmu->type;
|
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95544010 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-06 21:38:22 +03:00
|
|
|
evsel = __add_event(list, &parse_state->idx, &attr, NULL, pmu, NULL, auto_merge_stats);
|
2018-03-06 17:04:43 +03:00
|
|
|
if (evsel) {
|
|
|
|
evsel->pmu_name = name;
|
|
|
|
return 0;
|
|
|
|
} else {
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
2014-08-15 23:08:40 +04:00
|
|
|
}
|
|
|
|
|
2014-09-24 18:04:06 +04:00
|
|
|
if (perf_pmu__check_alias(pmu, head_config, &info))
|
2012-06-15 10:31:41 +04:00
|
|
|
return -EINVAL;
|
|
|
|
|
2012-03-15 23:09:18 +04:00
|
|
|
/*
|
|
|
|
* Configure hardcoded terms first, no need to check
|
|
|
|
* return value when called with fail == 0 ;)
|
|
|
|
*/
|
2017-08-17 22:13:34 +03:00
|
|
|
if (config_attr(&attr, head_config, parse_state->error, config_term_pmu))
|
2015-04-22 22:10:18 +03:00
|
|
|
return -EINVAL;
|
2012-03-15 23:09:18 +04:00
|
|
|
|
2015-07-29 12:42:10 +03:00
|
|
|
if (get_config_terms(head_config, &config_terms))
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
if (perf_pmu__config(pmu, &attr, head_config, parse_state->error))
|
2012-03-15 23:09:18 +04:00
|
|
|
return -EINVAL;
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
evsel = __add_event(list, &parse_state->idx, &attr,
|
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95544010 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-06 21:38:22 +03:00
|
|
|
get_config_name(head_config), pmu,
|
perf stat: Only auto-merge events that are PMU aliases
Peter reported that when he explicitely asked for multiple events with
the same name on the command line it got coalesced into just one line,
i.e.:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
3,269,652 cycles
0.000884123 seconds time elapsed
#
And while there is the --no-merges option to disable that auto-merging,
this is a blunt change in behaviour for such explicit request, so change
the code so that this auto merging is done only when handling the multi
PMU aliases with the same name that introduced this coalescing,
restoring the previous behaviour for the explicit case:
# perf stat -e cycles -e cycles -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,472,837 cycles
1,472,837 cycles
1,472,837 cycles
0.001764870 seconds time elapsed
#
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 430daf2dc7af ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20170831184122.GK4831@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 21:32:18 +03:00
|
|
|
&config_terms, auto_merge_stats);
|
2013-11-12 20:58:49 +04:00
|
|
|
if (evsel) {
|
2014-09-24 18:04:06 +04:00
|
|
|
evsel->unit = info.unit;
|
|
|
|
evsel->scale = info.scale;
|
2014-11-21 12:31:12 +03:00
|
|
|
evsel->per_pkg = info.per_pkg;
|
2014-11-21 12:31:13 +03:00
|
|
|
evsel->snapshot = info.snapshot;
|
perf stat: Output JSON MetricExpr metric
Add generic infrastructure to perf stat to output ratios for
"MetricExpr" entries in the event lists. Many events are more useful as
ratios than in raw form, typically some count in relation to total
ticks.
Transfer the MetricExpr information from the alias to the evsel.
We mark the events that need to be collected for MetricExpr, and also
link the events using them with a pointer. The code is careful to always
prefer the right event in the same group to minimize multiplexing
errors. At the moment only a single relation is supported.
Then add a rblist to the stat shadow code that remembers stats based on
the cpu and context.
Then finally update and retrieve and print these values similarly to the
existing hardcoded perf metrics. We use the simple expression parser
added earlier to evaluate the expression.
Normally we just output the result without further commentary, but for
--metric-only this would lead to empty columns. So for this case use the
original event as description.
There is no attempt to automatically add the MetricExpr event, if it is
missing, however we suggest it to the user, because the user tool
doesn't have enough information to reliably construct a group that is
guaranteed to schedule. So we leave that to the user.
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}'
1.000147889 800,085,181 unc_p_clockticks
1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6
2.000448381 800,218,217 unc_p_clockticks
2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8
3.000639852 800,243,057 unc_p_clockticks
3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
# time freq_max_os_cycles %
1.000127077 0.9
2.000301436 0.7
3.000456379 0.0
v2: Change from DivideBy to MetricExpr
v3: Use expr__ prefix. Support more than one other event.
v4: Update description
v5: Only print warning message once for multiple PMUs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-20 23:17:08 +03:00
|
|
|
evsel->metric_expr = info.metric_expr;
|
2017-03-20 23:17:10 +03:00
|
|
|
evsel->metric_name = info.metric_name;
|
2018-03-06 17:04:43 +03:00
|
|
|
evsel->pmu_name = name;
|
2013-11-12 20:58:49 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
return evsel ? 0 : -ENOMEM;
|
2012-03-15 23:09:18 +04:00
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
int parse_events_multi_pmu_add(struct parse_events_state *parse_state,
|
2017-03-20 23:17:02 +03:00
|
|
|
char *str, struct list_head **listp)
|
|
|
|
{
|
|
|
|
struct list_head *head;
|
|
|
|
struct parse_events_term *term;
|
|
|
|
struct list_head *list;
|
|
|
|
struct perf_pmu *pmu = NULL;
|
|
|
|
int ok = 0;
|
|
|
|
|
|
|
|
*listp = NULL;
|
|
|
|
/* Add it for all PMUs that support the alias */
|
|
|
|
list = malloc(sizeof(struct list_head));
|
|
|
|
if (!list)
|
|
|
|
return -1;
|
|
|
|
INIT_LIST_HEAD(list);
|
|
|
|
while ((pmu = perf_pmu__scan(pmu)) != NULL) {
|
|
|
|
struct perf_pmu_alias *alias;
|
|
|
|
|
|
|
|
list_for_each_entry(alias, &pmu->aliases, list) {
|
|
|
|
if (!strcasecmp(alias->name, str)) {
|
|
|
|
head = malloc(sizeof(struct list_head));
|
|
|
|
if (!head)
|
|
|
|
return -1;
|
|
|
|
INIT_LIST_HEAD(head);
|
|
|
|
if (parse_events_term__num(&term, PARSE_EVENTS__TERM_TYPE_USER,
|
|
|
|
str, 1, false, &str, NULL) < 0)
|
|
|
|
return -1;
|
|
|
|
list_add_tail(&term->list, head);
|
|
|
|
|
2018-03-06 17:04:44 +03:00
|
|
|
if (!parse_events_add_pmu(parse_state, list,
|
|
|
|
pmu->name, head, true)) {
|
2017-03-20 23:17:02 +03:00
|
|
|
pr_debug("%s -> %s/%s/\n", str,
|
|
|
|
pmu->name, alias->str);
|
|
|
|
ok++;
|
|
|
|
}
|
|
|
|
|
|
|
|
parse_events_terms__delete(head);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!ok)
|
|
|
|
return -1;
|
|
|
|
*listp = list;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
perf tools: Enable grouping logic for parsed events
This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.
The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.
With the new '{}' group syntax you can create group like:
# perf record -e '{cycles,faults}' ls
resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.
All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.
Examples (first event in brackets is group leader):
# 1 group (cpu-clock,task-clock)
perf record --group -e cpu-clock,task-clock ls
perf record -e '{cpu-clock,task-clock}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls
# 1 group (cpu-clock,task-clock,minor-faults,major-faults)
perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
-e instructions ls
# 1 group
# (cpu-clock,task-clock,minor-faults,major-faults,instructions)
perf record --group -e cpu-clock,task-clock \
-e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls
It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:
# perf record -r '{faults:k,cache-references}:p'
resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 14:22:36 +04:00
|
|
|
int parse_events__modifier_group(struct list_head *list,
|
|
|
|
char *event_mod)
|
2012-08-08 14:14:14 +04:00
|
|
|
{
|
perf tools: Enable grouping logic for parsed events
This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.
The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.
With the new '{}' group syntax you can create group like:
# perf record -e '{cycles,faults}' ls
resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.
All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.
Examples (first event in brackets is group leader):
# 1 group (cpu-clock,task-clock)
perf record --group -e cpu-clock,task-clock ls
perf record -e '{cpu-clock,task-clock}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls
# 1 group (cpu-clock,task-clock,minor-faults,major-faults)
perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
-e instructions ls
# 1 group
# (cpu-clock,task-clock,minor-faults,major-faults,instructions)
perf record --group -e cpu-clock,task-clock \
-e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls
It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:
# perf record -r '{faults:k,cache-references}:p'
resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 14:22:36 +04:00
|
|
|
return parse_events__modifier_event(list, event_mod, true);
|
|
|
|
}
|
|
|
|
|
2012-08-14 23:35:48 +04:00
|
|
|
void parse_events__set_leader(char *name, struct list_head *list)
|
perf tools: Enable grouping logic for parsed events
This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.
The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.
With the new '{}' group syntax you can create group like:
# perf record -e '{cycles,faults}' ls
resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.
All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.
Examples (first event in brackets is group leader):
# 1 group (cpu-clock,task-clock)
perf record --group -e cpu-clock,task-clock ls
perf record -e '{cpu-clock,task-clock}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls
# 1 group (cpu-clock,task-clock,minor-faults,major-faults)
perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
-e instructions ls
# 1 group
# (cpu-clock,task-clock,minor-faults,major-faults,instructions)
perf record --group -e cpu-clock,task-clock \
-e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls
It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:
# perf record -r '{faults:k,cache-references}:p'
resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 14:22:36 +04:00
|
|
|
{
|
|
|
|
struct perf_evsel *leader;
|
|
|
|
|
2015-09-06 10:13:17 +03:00
|
|
|
if (list_empty(list)) {
|
|
|
|
WARN_ONCE(true, "WARNING: failed to set leader: empty list");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2012-08-14 23:35:48 +04:00
|
|
|
__perf_evlist__set_leader(list);
|
|
|
|
leader = list_entry(list->next, struct perf_evsel, node);
|
perf tools: Enable grouping logic for parsed events
This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.
The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.
With the new '{}' group syntax you can create group like:
# perf record -e '{cycles,faults}' ls
resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.
All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.
Examples (first event in brackets is group leader):
# 1 group (cpu-clock,task-clock)
perf record --group -e cpu-clock,task-clock ls
perf record -e '{cpu-clock,task-clock}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls
# 1 group (cpu-clock,task-clock,minor-faults,major-faults)
perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
-e instructions ls
# 1 group
# (cpu-clock,task-clock,minor-faults,major-faults,instructions)
perf record --group -e cpu-clock,task-clock \
-e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls
It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:
# perf record -r '{faults:k,cache-references}:p'
resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 14:22:36 +04:00
|
|
|
leader->group_name = name ? strdup(name) : NULL;
|
2012-08-08 14:14:14 +04:00
|
|
|
}
|
|
|
|
|
2013-07-02 23:27:25 +04:00
|
|
|
/* list_event is assumed to point to malloc'ed memory */
|
2012-03-20 22:15:40 +04:00
|
|
|
void parse_events_update_lists(struct list_head *list_event,
|
|
|
|
struct list_head *list_all)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Called for single event definition. Update the
|
2012-08-08 14:14:14 +04:00
|
|
|
* 'all event' list, and reinit the 'single event'
|
2012-03-20 22:15:40 +04:00
|
|
|
* list, for next event definition.
|
|
|
|
*/
|
|
|
|
list_splice_tail(list_event, list_all);
|
2012-05-21 11:12:51 +04:00
|
|
|
free(list_event);
|
2012-03-20 22:15:40 +04:00
|
|
|
}
|
|
|
|
|
2012-08-08 14:21:54 +04:00
|
|
|
struct event_modifier {
|
|
|
|
int eu;
|
|
|
|
int ek;
|
|
|
|
int eh;
|
|
|
|
int eH;
|
|
|
|
int eG;
|
2015-04-08 00:25:14 +03:00
|
|
|
int eI;
|
2012-08-08 14:21:54 +04:00
|
|
|
int precise;
|
perf tools: Introduce 'P' modifier to request max precision
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-05 21:06:05 +03:00
|
|
|
int precise_max;
|
2012-08-08 14:21:54 +04:00
|
|
|
int exclude_GH;
|
2012-10-10 19:39:03 +04:00
|
|
|
int sample_read;
|
perf tools: Add support for pinned modifier
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-06 17:28:05 +04:00
|
|
|
int pinned;
|
perf tools: Support weak groups in 'perf stat'
Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.
User tools usually don't understand all these restrictions.
Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.
Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.
In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.
So far the weak group is only implemented for perf stat, not for record.
Here's an unschedulable group (on IvyBridge with SMT on)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
73,806,067 branches
4,848,144 branch-misses # 6.57% of all branches
14,754,458 l1d.replacement
24,905,558 l2_lines_in.all
<not supported> l2_rqsts.all_code_rd <------- will never report anything
With the weak group:
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
The extra event scheduled with some extra multiplexing
v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.
Committer testing:
Before:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> branches
<not counted> branch-misses
<not counted> l1d.replacement
<not counted> l2_lines_in.all
<not supported> l2_rqsts.all_code_rd
1.002147212 seconds time elapsed
# perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
83,207,892 branches
11,065,444 l1d.replacement
28,484,024 l2_lines_in.all
12,186,179 l2_rqsts.all_code_rd
1.001739493 seconds time elapsed
After:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1
Performance counter stats for 'system wide':
543,323,909 branches (80.01%)
27,100,512 branch-misses # 4.99% of all branches (80.02%)
50,402,905 l1d.replacement (80.03%)
67,385,892 l2_lines_in.all (80.01%)
21,352,885 l2_rqsts.all_code_rd (79.94%)
1.001086658 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 22:40:26 +03:00
|
|
|
int weak;
|
2012-08-08 14:21:54 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
static int get_event_modifier(struct event_modifier *mod, char *str,
|
|
|
|
struct perf_evsel *evsel)
|
2009-07-01 07:04:34 +04:00
|
|
|
{
|
2012-08-08 14:21:54 +04:00
|
|
|
int eu = evsel ? evsel->attr.exclude_user : 0;
|
|
|
|
int ek = evsel ? evsel->attr.exclude_kernel : 0;
|
|
|
|
int eh = evsel ? evsel->attr.exclude_hv : 0;
|
|
|
|
int eH = evsel ? evsel->attr.exclude_host : 0;
|
|
|
|
int eG = evsel ? evsel->attr.exclude_guest : 0;
|
2015-04-08 00:25:14 +03:00
|
|
|
int eI = evsel ? evsel->attr.exclude_idle : 0;
|
2012-08-08 14:21:54 +04:00
|
|
|
int precise = evsel ? evsel->attr.precise_ip : 0;
|
perf tools: Introduce 'P' modifier to request max precision
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-05 21:06:05 +03:00
|
|
|
int precise_max = 0;
|
2012-10-10 19:39:03 +04:00
|
|
|
int sample_read = 0;
|
perf tools: Add support for pinned modifier
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-06 17:28:05 +04:00
|
|
|
int pinned = evsel ? evsel->attr.pinned : 0;
|
2009-06-06 11:58:57 +04:00
|
|
|
|
2012-08-08 14:21:54 +04:00
|
|
|
int exclude = eu | ek | eh;
|
|
|
|
int exclude_GH = evsel ? evsel->exclude_GH : 0;
|
perf tools: Support weak groups in 'perf stat'
Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.
User tools usually don't understand all these restrictions.
Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.
Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.
In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.
So far the weak group is only implemented for perf stat, not for record.
Here's an unschedulable group (on IvyBridge with SMT on)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
73,806,067 branches
4,848,144 branch-misses # 6.57% of all branches
14,754,458 l1d.replacement
24,905,558 l2_lines_in.all
<not supported> l2_rqsts.all_code_rd <------- will never report anything
With the weak group:
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
The extra event scheduled with some extra multiplexing
v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.
Committer testing:
Before:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> branches
<not counted> branch-misses
<not counted> l1d.replacement
<not counted> l2_lines_in.all
<not supported> l2_rqsts.all_code_rd
1.002147212 seconds time elapsed
# perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
83,207,892 branches
11,065,444 l1d.replacement
28,484,024 l2_lines_in.all
12,186,179 l2_rqsts.all_code_rd
1.001739493 seconds time elapsed
After:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1
Performance counter stats for 'system wide':
543,323,909 branches (80.01%)
27,100,512 branch-misses # 4.99% of all branches (80.02%)
50,402,905 l1d.replacement (80.03%)
67,385,892 l2_lines_in.all (80.01%)
21,352,885 l2_rqsts.all_code_rd (79.94%)
1.001086658 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 22:40:26 +03:00
|
|
|
int weak = 0;
|
2012-08-08 14:21:54 +04:00
|
|
|
|
|
|
|
memset(mod, 0, sizeof(*mod));
|
2011-04-27 06:06:33 +04:00
|
|
|
|
2009-07-01 07:04:34 +04:00
|
|
|
while (*str) {
|
2010-04-09 01:03:20 +04:00
|
|
|
if (*str == 'u') {
|
|
|
|
if (!exclude)
|
|
|
|
exclude = eu = ek = eh = 1;
|
2009-07-01 07:04:34 +04:00
|
|
|
eu = 0;
|
2010-04-09 01:03:20 +04:00
|
|
|
} else if (*str == 'k') {
|
|
|
|
if (!exclude)
|
|
|
|
exclude = eu = ek = eh = 1;
|
2009-07-01 07:04:34 +04:00
|
|
|
ek = 0;
|
2010-04-09 01:03:20 +04:00
|
|
|
} else if (*str == 'h') {
|
|
|
|
if (!exclude)
|
|
|
|
exclude = eu = ek = eh = 1;
|
2009-07-01 07:04:34 +04:00
|
|
|
eh = 0;
|
2012-01-04 20:54:19 +04:00
|
|
|
} else if (*str == 'G') {
|
|
|
|
if (!exclude_GH)
|
|
|
|
exclude_GH = eG = eH = 1;
|
|
|
|
eG = 0;
|
|
|
|
} else if (*str == 'H') {
|
|
|
|
if (!exclude_GH)
|
|
|
|
exclude_GH = eG = eH = 1;
|
|
|
|
eH = 0;
|
2015-04-08 00:25:14 +03:00
|
|
|
} else if (*str == 'I') {
|
|
|
|
eI = 1;
|
2010-04-09 01:03:20 +04:00
|
|
|
} else if (*str == 'p') {
|
|
|
|
precise++;
|
2012-09-14 00:59:13 +04:00
|
|
|
/* use of precise requires exclude_guest */
|
|
|
|
if (!exclude_GH)
|
|
|
|
eG = 1;
|
perf tools: Introduce 'P' modifier to request max precision
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-05 21:06:05 +03:00
|
|
|
} else if (*str == 'P') {
|
|
|
|
precise_max = 1;
|
2012-10-10 19:39:03 +04:00
|
|
|
} else if (*str == 'S') {
|
|
|
|
sample_read = 1;
|
perf tools: Add support for pinned modifier
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-06 17:28:05 +04:00
|
|
|
} else if (*str == 'D') {
|
|
|
|
pinned = 1;
|
perf tools: Support weak groups in 'perf stat'
Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.
User tools usually don't understand all these restrictions.
Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.
Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.
In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.
So far the weak group is only implemented for perf stat, not for record.
Here's an unschedulable group (on IvyBridge with SMT on)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
73,806,067 branches
4,848,144 branch-misses # 6.57% of all branches
14,754,458 l1d.replacement
24,905,558 l2_lines_in.all
<not supported> l2_rqsts.all_code_rd <------- will never report anything
With the weak group:
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
The extra event scheduled with some extra multiplexing
v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.
Committer testing:
Before:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> branches
<not counted> branch-misses
<not counted> l1d.replacement
<not counted> l2_lines_in.all
<not supported> l2_rqsts.all_code_rd
1.002147212 seconds time elapsed
# perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
83,207,892 branches
11,065,444 l1d.replacement
28,484,024 l2_lines_in.all
12,186,179 l2_rqsts.all_code_rd
1.001739493 seconds time elapsed
After:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1
Performance counter stats for 'system wide':
543,323,909 branches (80.01%)
27,100,512 branch-misses # 4.99% of all branches (80.02%)
50,402,905 l1d.replacement (80.03%)
67,385,892 l2_lines_in.all (80.01%)
21,352,885 l2_rqsts.all_code_rd (79.94%)
1.001086658 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 22:40:26 +03:00
|
|
|
} else if (*str == 'W') {
|
|
|
|
weak = 1;
|
2010-04-09 01:03:20 +04:00
|
|
|
} else
|
2009-07-01 07:04:34 +04:00
|
|
|
break;
|
2010-04-09 01:03:20 +04:00
|
|
|
|
2009-07-01 07:04:34 +04:00
|
|
|
++str;
|
2009-05-26 11:17:18 +04:00
|
|
|
}
|
2011-04-27 06:06:33 +04:00
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
/*
|
|
|
|
* precise ip:
|
|
|
|
*
|
|
|
|
* 0 - SAMPLE_IP can have arbitrary skid
|
|
|
|
* 1 - SAMPLE_IP must have constant skid
|
|
|
|
* 2 - SAMPLE_IP requested to have 0 skid
|
|
|
|
* 3 - SAMPLE_IP must have 0 skid
|
|
|
|
*
|
|
|
|
* See also PERF_RECORD_MISC_EXACT_IP
|
|
|
|
*/
|
|
|
|
if (precise > 3)
|
|
|
|
return -EINVAL;
|
2011-04-27 06:06:33 +04:00
|
|
|
|
2012-08-08 14:21:54 +04:00
|
|
|
mod->eu = eu;
|
|
|
|
mod->ek = ek;
|
|
|
|
mod->eh = eh;
|
|
|
|
mod->eH = eH;
|
|
|
|
mod->eG = eG;
|
2015-04-08 00:25:14 +03:00
|
|
|
mod->eI = eI;
|
2012-08-08 14:21:54 +04:00
|
|
|
mod->precise = precise;
|
perf tools: Introduce 'P' modifier to request max precision
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-05 21:06:05 +03:00
|
|
|
mod->precise_max = precise_max;
|
2012-08-08 14:21:54 +04:00
|
|
|
mod->exclude_GH = exclude_GH;
|
2012-10-10 19:39:03 +04:00
|
|
|
mod->sample_read = sample_read;
|
perf tools: Add support for pinned modifier
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-06 17:28:05 +04:00
|
|
|
mod->pinned = pinned;
|
perf tools: Support weak groups in 'perf stat'
Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.
User tools usually don't understand all these restrictions.
Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.
Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.
In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.
So far the weak group is only implemented for perf stat, not for record.
Here's an unschedulable group (on IvyBridge with SMT on)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
73,806,067 branches
4,848,144 branch-misses # 6.57% of all branches
14,754,458 l1d.replacement
24,905,558 l2_lines_in.all
<not supported> l2_rqsts.all_code_rd <------- will never report anything
With the weak group:
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
The extra event scheduled with some extra multiplexing
v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.
Committer testing:
Before:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> branches
<not counted> branch-misses
<not counted> l1d.replacement
<not counted> l2_lines_in.all
<not supported> l2_rqsts.all_code_rd
1.002147212 seconds time elapsed
# perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
83,207,892 branches
11,065,444 l1d.replacement
28,484,024 l2_lines_in.all
12,186,179 l2_rqsts.all_code_rd
1.001739493 seconds time elapsed
After:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1
Performance counter stats for 'system wide':
543,323,909 branches (80.01%)
27,100,512 branch-misses # 4.99% of all branches (80.02%)
50,402,905 l1d.replacement (80.03%)
67,385,892 l2_lines_in.all (80.01%)
21,352,885 l2_rqsts.all_code_rd (79.94%)
1.001086658 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 22:40:26 +03:00
|
|
|
mod->weak = weak;
|
perf tools: Add support for pinned modifier
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-06 17:28:05 +04:00
|
|
|
|
2012-08-08 14:21:54 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-11-13 18:32:58 +04:00
|
|
|
/*
|
|
|
|
* Basic modifier sanity check to validate it contains only one
|
|
|
|
* instance of any modifier (apart from 'p') present.
|
|
|
|
*/
|
|
|
|
static int check_modifier(char *str)
|
|
|
|
{
|
|
|
|
char *p = str;
|
|
|
|
|
|
|
|
/* The sizeof includes 0 byte as well. */
|
perf tools: Support weak groups in 'perf stat'
Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.
User tools usually don't understand all these restrictions.
Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.
Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.
In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.
So far the weak group is only implemented for perf stat, not for record.
Here's an unschedulable group (on IvyBridge with SMT on)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
73,806,067 branches
4,848,144 branch-misses # 6.57% of all branches
14,754,458 l1d.replacement
24,905,558 l2_lines_in.all
<not supported> l2_rqsts.all_code_rd <------- will never report anything
With the weak group:
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
The extra event scheduled with some extra multiplexing
v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.
Committer testing:
Before:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> branches
<not counted> branch-misses
<not counted> l1d.replacement
<not counted> l2_lines_in.all
<not supported> l2_rqsts.all_code_rd
1.002147212 seconds time elapsed
# perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
83,207,892 branches
11,065,444 l1d.replacement
28,484,024 l2_lines_in.all
12,186,179 l2_rqsts.all_code_rd
1.001739493 seconds time elapsed
After:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1
Performance counter stats for 'system wide':
543,323,909 branches (80.01%)
27,100,512 branch-misses # 4.99% of all branches (80.02%)
50,402,905 l1d.replacement (80.03%)
67,385,892 l2_lines_in.all (80.01%)
21,352,885 l2_rqsts.all_code_rd (79.94%)
1.001086658 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 22:40:26 +03:00
|
|
|
if (strlen(str) > (sizeof("ukhGHpppPSDIW") - 1))
|
2012-11-13 18:32:58 +04:00
|
|
|
return -1;
|
|
|
|
|
|
|
|
while (*p) {
|
|
|
|
if (*p != 'p' && strchr(p + 1, *p))
|
|
|
|
return -1;
|
|
|
|
p++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-08-08 14:21:54 +04:00
|
|
|
int parse_events__modifier_event(struct list_head *list, char *str, bool add)
|
|
|
|
{
|
|
|
|
struct perf_evsel *evsel;
|
|
|
|
struct event_modifier mod;
|
|
|
|
|
|
|
|
if (str == NULL)
|
|
|
|
return 0;
|
|
|
|
|
2012-11-13 18:32:58 +04:00
|
|
|
if (check_modifier(str))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2012-08-08 14:21:54 +04:00
|
|
|
if (!add && get_event_modifier(&mod, str, NULL))
|
|
|
|
return -EINVAL;
|
|
|
|
|
2016-06-23 17:26:15 +03:00
|
|
|
__evlist__for_each_entry(list, evsel) {
|
2012-08-08 14:21:54 +04:00
|
|
|
if (add && get_event_modifier(&mod, str, evsel))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
evsel->attr.exclude_user = mod.eu;
|
|
|
|
evsel->attr.exclude_kernel = mod.ek;
|
|
|
|
evsel->attr.exclude_hv = mod.eh;
|
|
|
|
evsel->attr.precise_ip = mod.precise;
|
|
|
|
evsel->attr.exclude_host = mod.eH;
|
|
|
|
evsel->attr.exclude_guest = mod.eG;
|
2015-04-08 00:25:14 +03:00
|
|
|
evsel->attr.exclude_idle = mod.eI;
|
2012-08-08 14:21:54 +04:00
|
|
|
evsel->exclude_GH = mod.exclude_GH;
|
2012-10-10 19:39:03 +04:00
|
|
|
evsel->sample_read = mod.sample_read;
|
perf tools: Introduce 'P' modifier to request max precision
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-05 21:06:05 +03:00
|
|
|
evsel->precise_max = mod.precise_max;
|
perf tools: Support weak groups in 'perf stat'
Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.
User tools usually don't understand all these restrictions.
Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.
Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.
In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.
So far the weak group is only implemented for perf stat, not for record.
Here's an unschedulable group (on IvyBridge with SMT on)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
73,806,067 branches
4,848,144 branch-misses # 6.57% of all branches
14,754,458 l1d.replacement
24,905,558 l2_lines_in.all
<not supported> l2_rqsts.all_code_rd <------- will never report anything
With the weak group:
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
The extra event scheduled with some extra multiplexing
v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.
Committer testing:
Before:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> branches
<not counted> branch-misses
<not counted> l1d.replacement
<not counted> l2_lines_in.all
<not supported> l2_rqsts.all_code_rd
1.002147212 seconds time elapsed
# perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
83,207,892 branches
11,065,444 l1d.replacement
28,484,024 l2_lines_in.all
12,186,179 l2_rqsts.all_code_rd
1.001739493 seconds time elapsed
After:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1
Performance counter stats for 'system wide':
543,323,909 branches (80.01%)
27,100,512 branch-misses # 4.99% of all branches (80.02%)
50,402,905 l1d.replacement (80.03%)
67,385,892 l2_lines_in.all (80.01%)
21,352,885 l2_rqsts.all_code_rd (79.94%)
1.001086658 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-31 22:40:26 +03:00
|
|
|
evsel->weak_group = mod.weak;
|
perf tools: Add support for pinned modifier
This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".
So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.
This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.
Comparison of results with and without pinning:
$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...
79,590,480,683 cycles # 0.000 GHz
166,123,716,524 instructions # 2.09 insns per cycle
# 0.11 stalled cycles per insn
79,352,134,463 cycles # 0.000 GHz [11.11%]
165,178,301,818 instructions # 2.08 insns per cycle
# 0.11 stalled cycles per insn [11.13%]
As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.
The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
suggested by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-08-06 17:28:05 +04:00
|
|
|
|
|
|
|
if (perf_evsel__is_group_leader(evsel))
|
|
|
|
evsel->attr.pinned = mod.pinned;
|
2012-03-15 23:09:15 +04:00
|
|
|
}
|
2011-04-27 06:06:33 +04:00
|
|
|
|
2009-07-01 07:04:34 +04:00
|
|
|
return 0;
|
|
|
|
}
|
2009-05-26 13:10:09 +04:00
|
|
|
|
2012-08-16 23:10:21 +04:00
|
|
|
int parse_events_name(struct list_head *list, char *name)
|
|
|
|
{
|
|
|
|
struct perf_evsel *evsel;
|
|
|
|
|
2016-06-23 17:26:15 +03:00
|
|
|
__evlist__for_each_entry(list, evsel) {
|
2012-08-16 23:10:21 +04:00
|
|
|
if (!evsel->name)
|
|
|
|
evsel->name = strdup(name);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-10-07 19:08:50 +04:00
|
|
|
static int
|
|
|
|
comp_pmu(const void *p1, const void *p2)
|
|
|
|
{
|
|
|
|
struct perf_pmu_event_symbol *pmu1 = (struct perf_pmu_event_symbol *) p1;
|
|
|
|
struct perf_pmu_event_symbol *pmu2 = (struct perf_pmu_event_symbol *) p2;
|
|
|
|
|
2016-09-16 01:24:53 +03:00
|
|
|
return strcasecmp(pmu1->symbol, pmu2->symbol);
|
2014-10-07 19:08:50 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static void perf_pmu__parse_cleanup(void)
|
|
|
|
{
|
|
|
|
if (perf_pmu_events_list_num > 0) {
|
|
|
|
struct perf_pmu_event_symbol *p;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < perf_pmu_events_list_num; i++) {
|
|
|
|
p = perf_pmu_events_list + i;
|
2017-02-01 15:34:07 +03:00
|
|
|
zfree(&p->symbol);
|
2014-10-07 19:08:50 +04:00
|
|
|
}
|
2017-02-01 15:34:06 +03:00
|
|
|
zfree(&perf_pmu_events_list);
|
2014-10-07 19:08:50 +04:00
|
|
|
perf_pmu_events_list_num = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#define SET_SYMBOL(str, stype) \
|
|
|
|
do { \
|
|
|
|
p->symbol = str; \
|
|
|
|
if (!p->symbol) \
|
|
|
|
goto err; \
|
|
|
|
p->type = stype; \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Read the pmu events list from sysfs
|
|
|
|
* Save it into perf_pmu_events_list
|
|
|
|
*/
|
|
|
|
static void perf_pmu__parse_init(void)
|
|
|
|
{
|
|
|
|
|
|
|
|
struct perf_pmu *pmu = NULL;
|
|
|
|
struct perf_pmu_alias *alias;
|
|
|
|
int len = 0;
|
|
|
|
|
2017-01-28 05:03:39 +03:00
|
|
|
pmu = NULL;
|
|
|
|
while ((pmu = perf_pmu__scan(pmu)) != NULL) {
|
|
|
|
list_for_each_entry(alias, &pmu->aliases, list) {
|
|
|
|
if (strchr(alias->name, '-'))
|
|
|
|
len++;
|
|
|
|
len++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (len == 0) {
|
2014-10-07 19:08:50 +04:00
|
|
|
perf_pmu_events_list_num = -1;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
perf_pmu_events_list = malloc(sizeof(struct perf_pmu_event_symbol) * len);
|
|
|
|
if (!perf_pmu_events_list)
|
|
|
|
return;
|
|
|
|
perf_pmu_events_list_num = len;
|
|
|
|
|
|
|
|
len = 0;
|
2017-01-28 05:03:39 +03:00
|
|
|
pmu = NULL;
|
|
|
|
while ((pmu = perf_pmu__scan(pmu)) != NULL) {
|
|
|
|
list_for_each_entry(alias, &pmu->aliases, list) {
|
|
|
|
struct perf_pmu_event_symbol *p = perf_pmu_events_list + len;
|
|
|
|
char *tmp = strchr(alias->name, '-');
|
|
|
|
|
|
|
|
if (tmp != NULL) {
|
|
|
|
SET_SYMBOL(strndup(alias->name, tmp - alias->name),
|
|
|
|
PMU_EVENT_SYMBOL_PREFIX);
|
|
|
|
p++;
|
|
|
|
SET_SYMBOL(strdup(++tmp), PMU_EVENT_SYMBOL_SUFFIX);
|
|
|
|
len += 2;
|
|
|
|
} else {
|
|
|
|
SET_SYMBOL(strdup(alias->name), PMU_EVENT_SYMBOL);
|
|
|
|
len++;
|
|
|
|
}
|
2014-10-07 19:08:50 +04:00
|
|
|
}
|
|
|
|
}
|
|
|
|
qsort(perf_pmu_events_list, len,
|
|
|
|
sizeof(struct perf_pmu_event_symbol), comp_pmu);
|
|
|
|
|
|
|
|
return;
|
|
|
|
err:
|
|
|
|
perf_pmu__parse_cleanup();
|
|
|
|
}
|
|
|
|
|
|
|
|
enum perf_pmu_event_symbol_type
|
|
|
|
perf_pmu__parse_check(const char *name)
|
|
|
|
{
|
|
|
|
struct perf_pmu_event_symbol p, *r;
|
|
|
|
|
|
|
|
/* scan kernel pmu events from sysfs if needed */
|
|
|
|
if (perf_pmu_events_list_num == 0)
|
|
|
|
perf_pmu__parse_init();
|
|
|
|
/*
|
|
|
|
* name "cpu" could be prefix of cpu-cycles or cpu// events.
|
|
|
|
* cpu-cycles has been handled by hardcode.
|
|
|
|
* So it must be cpu// events, not kernel pmu event.
|
|
|
|
*/
|
|
|
|
if ((perf_pmu_events_list_num <= 0) || !strcmp(name, "cpu"))
|
|
|
|
return PMU_EVENT_SYMBOL_ERR;
|
|
|
|
|
|
|
|
p.symbol = strdup(name);
|
|
|
|
r = bsearch(&p, perf_pmu_events_list,
|
|
|
|
(size_t) perf_pmu_events_list_num,
|
|
|
|
sizeof(struct perf_pmu_event_symbol), comp_pmu);
|
2017-02-01 15:34:07 +03:00
|
|
|
zfree(&p.symbol);
|
2014-10-07 19:08:50 +04:00
|
|
|
return r ? r->type : PMU_EVENT_SYMBOL_ERR;
|
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
static int parse_events__scanner(const char *str, void *parse_state, int start_token)
|
2009-07-01 07:04:34 +04:00
|
|
|
{
|
2012-03-15 23:09:15 +04:00
|
|
|
YY_BUFFER_STATE buffer;
|
2012-06-15 10:31:39 +04:00
|
|
|
void *scanner;
|
2012-06-15 10:31:38 +04:00
|
|
|
int ret;
|
2009-09-12 01:19:45 +04:00
|
|
|
|
2012-06-15 10:31:40 +04:00
|
|
|
ret = parse_events_lex_init_extra(start_token, &scanner);
|
2012-06-15 10:31:39 +04:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
buffer = parse_events__scan_string(str, scanner);
|
2009-06-06 11:58:57 +04:00
|
|
|
|
2012-05-21 11:12:50 +04:00
|
|
|
#ifdef PARSER_DEBUG
|
|
|
|
parse_events_debug = 1;
|
|
|
|
#endif
|
2017-08-17 22:13:34 +03:00
|
|
|
ret = parse_events_parse(parse_state, scanner);
|
2012-06-15 10:31:39 +04:00
|
|
|
|
|
|
|
parse_events__flush_buffer(buffer, scanner);
|
|
|
|
parse_events__delete_buffer(buffer, scanner);
|
|
|
|
parse_events_lex_destroy(scanner);
|
|
|
|
return ret;
|
|
|
|
}
|
2009-09-12 01:19:45 +04:00
|
|
|
|
2012-06-15 10:31:40 +04:00
|
|
|
/*
|
|
|
|
* parse event config string, return a list of event terms.
|
|
|
|
*/
|
|
|
|
int parse_events_terms(struct list_head *terms, const char *str)
|
|
|
|
{
|
2017-08-17 22:13:34 +03:00
|
|
|
struct parse_events_state parse_state = {
|
2012-06-15 10:31:40 +04:00
|
|
|
.terms = NULL,
|
|
|
|
};
|
|
|
|
int ret;
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
ret = parse_events__scanner(str, &parse_state, PE_START_TERMS);
|
2012-06-15 10:31:40 +04:00
|
|
|
if (!ret) {
|
2017-08-17 22:13:34 +03:00
|
|
|
list_splice(parse_state.terms, terms);
|
|
|
|
zfree(&parse_state.terms);
|
2012-06-15 10:31:40 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
parse_events_terms__delete(parse_state.terms);
|
2012-06-15 10:31:40 +04:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
int parse_events(struct perf_evlist *evlist, const char *str,
|
|
|
|
struct parse_events_error *err)
|
2012-06-15 10:31:39 +04:00
|
|
|
{
|
2017-08-17 22:13:34 +03:00
|
|
|
struct parse_events_state parse_state = {
|
|
|
|
.list = LIST_HEAD_INIT(parse_state.list),
|
perf tools: Enable passing event to BPF object
A new syntax is added to the parser so that the user can access
predefined perf events in BPF objects.
After this patch, BPF programs for perf are finally able to utilize
bpf_perf_event_read() introduced in commit 35578d798400 ("bpf: Implement
function bpf_perf_event_read() that get the selected hardware PMU
counter").
Test result:
# cat test_bpf_map_2.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_read)(struct bpf_map_def *, int) =
(void *)BPF_FUNC_perf_event_read;
struct bpf_map_def SEC("maps") pmu_map = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = __NR_CPUS__,
};
SEC("func_write=sys_write")
int func_write(void *ctx)
{
unsigned long long val;
char fmt[] = "sys_write: pmu=%llu\n";
val = perf_event_read(&pmu_map, get_smp_processor_id());
trace_printk(fmt, sizeof(fmt), val);
return 0;
}
SEC("func_write_return=sys_write%return")
int func_write_return(void *ctx)
{
unsigned long long val = 0;
char fmt[] = "sys_write_return: pmu=%llu\n";
val = perf_event_read(&pmu_map, get_smp_processor_id());
trace_printk(fmt, sizeof(fmt), val);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Normal case:
# echo "" > /sys/kernel/debug/tracing/trace
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls /
[SNIP]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (7 samples) ]
# cat /sys/kernel/debug/tracing/trace | grep ls
ls-17066 [000] d... 938449.863301: : sys_write: pmu=1157327
ls-17066 [000] dN.. 938449.863342: : sys_write_return: pmu=1225218
ls-17066 [000] d... 938449.863349: : sys_write: pmu=1241922
ls-17066 [000] dN.. 938449.863369: : sys_write_return: pmu=1267445
Normal case (system wide):
# echo "" > /sys/kernel/debug/tracing/trace
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.811 MB perf.data (120 samples) ]
# cat /sys/kernel/debug/tracing/trace | grep -v '18446744073709551594' | grep -v perf | head -n 20
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
gmain-30828 [002] d... 2740551.068992: : sys_write: pmu=84373
gmain-30828 [002] d... 2740551.068992: : sys_write_return: pmu=87696
gmain-30828 [002] d... 2740551.068996: : sys_write: pmu=100658
gmain-30828 [002] d... 2740551.068997: : sys_write_return: pmu=102572
Error case 1:
# perf record -e './test_bpf_map_2.c' ls /
[SNIP]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace | grep ls
ls-17115 [007] d... 2724279.665625: : sys_write: pmu=18446744073709551614
ls-17115 [007] dN.. 2724279.665651: : sys_write_return: pmu=18446744073709551614
ls-17115 [007] d... 2724279.665658: : sys_write: pmu=18446744073709551614
ls-17115 [007] dN.. 2724279.665677: : sys_write_return: pmu=18446744073709551614
(18446744073709551614 is 0xfffffffffffffffe (-2))
Error case 2:
# perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=evt/' -a
event syntax error: '..ps:pmu_map.event=evt/'
\___ Event not found for map setting
Hint: Valid config terms:
map:[<arraymap>].value=[value]
map:[<eventmap>].event=[event]
[SNIP]
Error case 3:
# ls /proc/2348/task/
2348 2505 2506 2507 2508
# perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -p 2348
ERROR: Apply config to BPF failed: Cannot set event to BPF map in multi-thread tracing
Error case 4:
# perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls /
ERROR: Apply config to BPF failed: Doesn't support inherit event (Hint: use -i to turn off inherit)
Error case 5:
# perf record -i -e raw_syscalls:sys_enter -e './test_bpf_map_2.c/map:pmu_map.event=raw_syscalls:sys_enter/' ls
ERROR: Apply config to BPF failed: Can only put raw, hardware and BPF output event into a BPF map
Error case 6:
# perf record -i -e './test_bpf_map_2.c/map:pmu_map.event=123/' ls /
event syntax error: '.._map.event=123/'
\___ Incorrect value type for map
[SNIP]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-7-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:10:33 +03:00
|
|
|
.idx = evlist->nr_entries,
|
|
|
|
.error = err,
|
|
|
|
.evlist = evlist,
|
2012-06-15 10:31:39 +04:00
|
|
|
};
|
|
|
|
int ret;
|
2009-09-12 01:19:45 +04:00
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
ret = parse_events__scanner(str, &parse_state, PE_START_EVENTS);
|
2014-10-07 19:08:50 +04:00
|
|
|
perf_pmu__parse_cleanup();
|
2012-03-15 23:09:15 +04:00
|
|
|
if (!ret) {
|
2015-07-10 10:36:09 +03:00
|
|
|
struct perf_evsel *last;
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
if (list_empty(&parse_state.list)) {
|
2015-09-06 10:13:17 +03:00
|
|
|
WARN_ONCE(true, "WARNING: event parser found nothing");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
perf_evlist__splice_list_tail(evlist, &parse_state.list);
|
|
|
|
evlist->nr_groups += parse_state.nr_groups;
|
2015-07-10 10:36:09 +03:00
|
|
|
last = perf_evlist__last(evlist);
|
|
|
|
last->cmdline_group_boundary = true;
|
|
|
|
|
2012-03-15 23:09:15 +04:00
|
|
|
return 0;
|
|
|
|
}
|
2009-09-12 01:19:45 +04:00
|
|
|
|
2012-03-20 22:15:40 +04:00
|
|
|
/*
|
|
|
|
* There are 2 users - builtin-record and builtin-test objects.
|
|
|
|
* Both call perf_evlist__delete in case of error, so we dont
|
|
|
|
* need to bother.
|
|
|
|
*/
|
2009-09-12 01:19:45 +04:00
|
|
|
return ret;
|
2009-05-26 13:10:09 +04:00
|
|
|
}
|
|
|
|
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
#define MAX_WIDTH 1000
|
|
|
|
static int get_term_width(void)
|
|
|
|
{
|
|
|
|
struct winsize ws;
|
|
|
|
|
|
|
|
get_term_dimensions(&ws);
|
|
|
|
return ws.ws_col > MAX_WIDTH ? MAX_WIDTH : ws.ws_col;
|
|
|
|
}
|
|
|
|
|
2017-09-14 00:50:06 +03:00
|
|
|
void parse_events_print_error(struct parse_events_error *err,
|
|
|
|
const char *event)
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
{
|
|
|
|
const char *str = "invalid or unsupported event: ";
|
|
|
|
char _buf[MAX_WIDTH];
|
|
|
|
char *buf = (char *) event;
|
|
|
|
int idx = 0;
|
|
|
|
|
|
|
|
if (err->str) {
|
|
|
|
/* -2 for extra '' in the final fprintf */
|
|
|
|
int width = get_term_width() - 2;
|
|
|
|
int len_event = strlen(event);
|
|
|
|
int len_str, max_len, cut = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Maximum error index indent, we will cut
|
|
|
|
* the event string if it's bigger.
|
|
|
|
*/
|
2015-07-17 19:33:51 +03:00
|
|
|
int max_err_idx = 13;
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Let's be specific with the message when
|
|
|
|
* we have the precise error.
|
|
|
|
*/
|
|
|
|
str = "event syntax error: ";
|
|
|
|
len_str = strlen(str);
|
|
|
|
max_len = width - len_str;
|
|
|
|
|
|
|
|
buf = _buf;
|
|
|
|
|
2016-02-24 21:02:25 +03:00
|
|
|
/* We're cutting from the beginning. */
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
if (err->idx > max_err_idx)
|
|
|
|
cut = err->idx - max_err_idx;
|
|
|
|
|
|
|
|
strncpy(buf, event + cut, max_len);
|
|
|
|
|
|
|
|
/* Mark cut parts with '..' on both sides. */
|
|
|
|
if (cut)
|
|
|
|
buf[0] = buf[1] = '.';
|
|
|
|
|
|
|
|
if ((len_event - cut) > max_len) {
|
|
|
|
buf[max_len - 1] = buf[max_len - 2] = '.';
|
|
|
|
buf[max_len] = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
idx = len_str + err->idx - cut;
|
|
|
|
}
|
|
|
|
|
|
|
|
fprintf(stderr, "%s'%s'\n", str, buf);
|
|
|
|
if (idx) {
|
|
|
|
fprintf(stderr, "%*s\\___ %s\n", idx + 1, "", err->str);
|
|
|
|
if (err->help)
|
|
|
|
fprintf(stderr, "\n%s\n", err->help);
|
2017-02-01 15:34:07 +03:00
|
|
|
zfree(&err->str);
|
|
|
|
zfree(&err->help);
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#undef MAX_WIDTH
|
|
|
|
|
2011-07-14 13:25:32 +04:00
|
|
|
int parse_events_option(const struct option *opt, const char *str,
|
2012-09-11 02:15:03 +04:00
|
|
|
int unset __maybe_unused)
|
2011-07-14 13:25:32 +04:00
|
|
|
{
|
|
|
|
struct perf_evlist *evlist = *(struct perf_evlist **)opt->value;
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
struct parse_events_error err = { .idx = 0, };
|
|
|
|
int ret = parse_events(evlist, str, &err);
|
|
|
|
|
2017-09-14 00:50:06 +03:00
|
|
|
if (ret) {
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
parse_events_print_error(&err, str);
|
2017-09-14 00:50:06 +03:00
|
|
|
fprintf(stderr, "Run 'perf list' for a list of valid events\n");
|
|
|
|
}
|
2012-10-27 00:30:06 +04:00
|
|
|
|
|
|
|
return ret;
|
2011-07-14 13:25:32 +04:00
|
|
|
}
|
|
|
|
|
2015-07-10 10:36:10 +03:00
|
|
|
static int
|
|
|
|
foreach_evsel_in_last_glob(struct perf_evlist *evlist,
|
|
|
|
int (*func)(struct perf_evsel *evsel,
|
|
|
|
const void *arg),
|
|
|
|
const void *arg)
|
2009-10-15 07:22:07 +04:00
|
|
|
{
|
2011-01-03 21:39:04 +03:00
|
|
|
struct perf_evsel *last = NULL;
|
2015-07-10 10:36:10 +03:00
|
|
|
int err;
|
2009-10-15 07:22:07 +04:00
|
|
|
|
2015-09-06 10:13:17 +03:00
|
|
|
/*
|
|
|
|
* Don't return when list_empty, give func a chance to report
|
|
|
|
* error when it found last == NULL.
|
|
|
|
*
|
|
|
|
* So no need to WARN here, let *func do this.
|
|
|
|
*/
|
2011-01-12 01:56:53 +03:00
|
|
|
if (evlist->nr_entries > 0)
|
2012-08-14 23:42:15 +04:00
|
|
|
last = perf_evlist__last(evlist);
|
2011-01-03 21:39:04 +03:00
|
|
|
|
2015-07-10 10:36:09 +03:00
|
|
|
do {
|
2015-07-10 10:36:10 +03:00
|
|
|
err = (*func)(last, arg);
|
|
|
|
if (err)
|
2015-07-10 10:36:09 +03:00
|
|
|
return -1;
|
2015-07-10 10:36:10 +03:00
|
|
|
if (!last)
|
|
|
|
return 0;
|
2015-07-10 10:36:09 +03:00
|
|
|
|
|
|
|
if (last->node.prev == &evlist->entries)
|
|
|
|
return 0;
|
|
|
|
last = list_entry(last->node.prev, struct perf_evsel, node);
|
|
|
|
} while (!last->cmdline_group_boundary);
|
2009-10-15 07:22:07 +04:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-07-10 10:36:10 +03:00
|
|
|
static int set_filter(struct perf_evsel *evsel, const void *arg)
|
|
|
|
{
|
|
|
|
const char *str = arg;
|
2016-09-16 17:44:05 +03:00
|
|
|
bool found = false;
|
|
|
|
int nr_addr_filters = 0;
|
|
|
|
struct perf_pmu *pmu = NULL;
|
2015-07-10 10:36:10 +03:00
|
|
|
|
2016-09-16 17:44:05 +03:00
|
|
|
if (evsel == NULL)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
if (evsel->attr.type == PERF_TYPE_TRACEPOINT) {
|
|
|
|
if (perf_evsel__append_tp_filter(evsel, str) < 0) {
|
|
|
|
fprintf(stderr,
|
|
|
|
"not enough memory to hold filter string\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
2015-07-10 10:36:10 +03:00
|
|
|
}
|
|
|
|
|
2016-09-16 17:44:05 +03:00
|
|
|
while ((pmu = perf_pmu__scan(pmu)) != NULL)
|
|
|
|
if (pmu->type == evsel->attr.type) {
|
|
|
|
found = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (found)
|
|
|
|
perf_pmu__scan_file(pmu, "nr_addr_filters",
|
|
|
|
"%d", &nr_addr_filters);
|
|
|
|
|
|
|
|
if (!nr_addr_filters)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
if (perf_evsel__append_addr_filter(evsel, str) < 0) {
|
2015-07-10 10:36:10 +03:00
|
|
|
fprintf(stderr,
|
|
|
|
"not enough memory to hold filter string\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
2016-09-16 17:44:05 +03:00
|
|
|
|
|
|
|
err:
|
|
|
|
fprintf(stderr,
|
|
|
|
"--filter option should follow a -e tracepoint or HW tracer option\n");
|
|
|
|
|
|
|
|
return -1;
|
2015-07-10 10:36:10 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
int parse_filter(const struct option *opt, const char *str,
|
|
|
|
int unset __maybe_unused)
|
|
|
|
{
|
|
|
|
struct perf_evlist *evlist = *(struct perf_evlist **)opt->value;
|
|
|
|
|
|
|
|
return foreach_evsel_in_last_glob(evlist, set_filter,
|
|
|
|
(const void *)str);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int add_exclude_perf_filter(struct perf_evsel *evsel,
|
|
|
|
const void *arg __maybe_unused)
|
|
|
|
{
|
|
|
|
char new_filter[64];
|
|
|
|
|
|
|
|
if (evsel == NULL || evsel->attr.type != PERF_TYPE_TRACEPOINT) {
|
|
|
|
fprintf(stderr,
|
|
|
|
"--exclude-perf option should follow a -e tracepoint option\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
snprintf(new_filter, sizeof(new_filter), "common_pid != %d", getpid());
|
|
|
|
|
2016-09-16 17:44:04 +03:00
|
|
|
if (perf_evsel__append_tp_filter(evsel, new_filter) < 0) {
|
2015-07-10 10:36:10 +03:00
|
|
|
fprintf(stderr,
|
|
|
|
"not enough memory to hold filter string\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int exclude_perf(const struct option *opt,
|
|
|
|
const char *arg __maybe_unused,
|
|
|
|
int unset __maybe_unused)
|
|
|
|
{
|
|
|
|
struct perf_evlist *evlist = *(struct perf_evlist **)opt->value;
|
|
|
|
|
|
|
|
return foreach_evsel_in_last_glob(evlist, add_exclude_perf_filter,
|
|
|
|
NULL);
|
|
|
|
}
|
|
|
|
|
2009-06-06 14:24:17 +04:00
|
|
|
static const char * const event_type_descriptors[] = {
|
|
|
|
"Hardware event",
|
|
|
|
"Software event",
|
|
|
|
"Tracepoint event",
|
|
|
|
"Hardware cache event",
|
2009-12-29 11:37:07 +03:00
|
|
|
"Raw hardware event descriptor",
|
|
|
|
"Hardware breakpoint",
|
2009-06-06 14:24:17 +04:00
|
|
|
};
|
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
static int cmp_string(const void *a, const void *b)
|
|
|
|
{
|
|
|
|
const char * const *as = a;
|
|
|
|
const char * const *bs = b;
|
|
|
|
|
|
|
|
return strcmp(*as, *bs);
|
|
|
|
}
|
|
|
|
|
2009-07-21 20:20:22 +04:00
|
|
|
/*
|
|
|
|
* Print the events from <debugfs_mount_point>/tracing/events
|
|
|
|
*/
|
|
|
|
|
2012-08-09 18:31:52 +04:00
|
|
|
void print_tracepoint_events(const char *subsys_glob, const char *event_glob,
|
|
|
|
bool name_only)
|
2009-07-21 20:20:22 +04:00
|
|
|
{
|
|
|
|
DIR *sys_dir, *evt_dir;
|
2016-04-08 17:53:02 +03:00
|
|
|
struct dirent *sys_dirent, *evt_dirent;
|
2009-07-21 20:20:22 +04:00
|
|
|
char evt_path[MAXPATHLEN];
|
2009-09-24 17:39:09 +04:00
|
|
|
char dir_path[MAXPATHLEN];
|
2015-02-27 13:21:25 +03:00
|
|
|
char **evt_list = NULL;
|
|
|
|
unsigned int evt_i = 0, evt_num = 0;
|
|
|
|
bool evt_num_known = false;
|
2009-07-21 20:20:22 +04:00
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
restart:
|
2011-11-16 20:03:07 +04:00
|
|
|
sys_dir = opendir(tracing_events_path);
|
2009-07-21 20:20:22 +04:00
|
|
|
if (!sys_dir)
|
2009-09-24 17:39:09 +04:00
|
|
|
return;
|
2009-09-04 23:39:51 +04:00
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
if (evt_num_known) {
|
|
|
|
evt_list = zalloc(sizeof(char *) * evt_num);
|
|
|
|
if (!evt_list)
|
|
|
|
goto out_close_sys_dir;
|
|
|
|
}
|
|
|
|
|
2016-04-08 17:53:02 +03:00
|
|
|
for_each_subsystem(sys_dir, sys_dirent) {
|
2014-12-17 23:24:45 +03:00
|
|
|
if (subsys_glob != NULL &&
|
2016-04-08 17:53:02 +03:00
|
|
|
!strglobmatch(sys_dirent->d_name, subsys_glob))
|
2011-02-17 20:38:58 +03:00
|
|
|
continue;
|
2009-09-24 17:39:09 +04:00
|
|
|
|
2011-11-16 20:03:07 +04:00
|
|
|
snprintf(dir_path, MAXPATHLEN, "%s/%s", tracing_events_path,
|
2016-04-08 17:53:02 +03:00
|
|
|
sys_dirent->d_name);
|
2009-09-24 17:39:09 +04:00
|
|
|
evt_dir = opendir(dir_path);
|
|
|
|
if (!evt_dir)
|
2009-09-04 23:39:51 +04:00
|
|
|
continue;
|
2009-09-24 17:39:09 +04:00
|
|
|
|
2016-04-08 17:53:02 +03:00
|
|
|
for_each_event(sys_dirent, evt_dir, evt_dirent) {
|
2014-12-17 23:24:45 +03:00
|
|
|
if (event_glob != NULL &&
|
2016-04-08 17:53:02 +03:00
|
|
|
!strglobmatch(evt_dirent->d_name, event_glob))
|
2011-02-17 20:38:58 +03:00
|
|
|
continue;
|
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
if (!evt_num_known) {
|
|
|
|
evt_num++;
|
2012-08-09 18:31:52 +04:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2009-07-21 20:20:22 +04:00
|
|
|
snprintf(evt_path, MAXPATHLEN, "%s:%s",
|
2016-04-08 17:53:02 +03:00
|
|
|
sys_dirent->d_name, evt_dirent->d_name);
|
2015-02-27 13:21:25 +03:00
|
|
|
|
|
|
|
evt_list[evt_i] = strdup(evt_path);
|
|
|
|
if (evt_list[evt_i] == NULL)
|
|
|
|
goto out_close_evt_dir;
|
|
|
|
evt_i++;
|
2009-07-21 20:20:22 +04:00
|
|
|
}
|
|
|
|
closedir(evt_dir);
|
|
|
|
}
|
|
|
|
closedir(sys_dir);
|
2015-02-27 13:21:25 +03:00
|
|
|
|
|
|
|
if (!evt_num_known) {
|
|
|
|
evt_num_known = true;
|
|
|
|
goto restart;
|
|
|
|
}
|
|
|
|
qsort(evt_list, evt_num, sizeof(char *), cmp_string);
|
|
|
|
evt_i = 0;
|
|
|
|
while (evt_i < evt_num) {
|
|
|
|
if (name_only) {
|
|
|
|
printf("%s ", evt_list[evt_i++]);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
printf(" %-50s [%s]\n", evt_list[evt_i++],
|
|
|
|
event_type_descriptors[PERF_TYPE_TRACEPOINT]);
|
|
|
|
}
|
2015-09-30 23:13:26 +03:00
|
|
|
if (evt_num && pager_in_use())
|
2015-02-27 13:21:25 +03:00
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
out_free:
|
|
|
|
evt_num = evt_i;
|
|
|
|
for (evt_i = 0; evt_i < evt_num; evt_i++)
|
|
|
|
zfree(&evt_list[evt_i]);
|
|
|
|
zfree(&evt_list);
|
|
|
|
return;
|
|
|
|
|
|
|
|
out_close_evt_dir:
|
|
|
|
closedir(evt_dir);
|
|
|
|
out_close_sys_dir:
|
|
|
|
closedir(sys_dir);
|
|
|
|
|
|
|
|
printf("FATAL: not enough memory to print %s\n",
|
|
|
|
event_type_descriptors[PERF_TYPE_TRACEPOINT]);
|
|
|
|
if (evt_list)
|
|
|
|
goto out_free;
|
2009-07-21 20:20:22 +04:00
|
|
|
}
|
|
|
|
|
2011-01-03 19:50:45 +03:00
|
|
|
/*
|
|
|
|
* Check whether event is in <debugfs_mount_point>/tracing/events
|
|
|
|
*/
|
|
|
|
|
|
|
|
int is_valid_tracepoint(const char *event_string)
|
|
|
|
{
|
|
|
|
DIR *sys_dir, *evt_dir;
|
2016-04-08 17:53:02 +03:00
|
|
|
struct dirent *sys_dirent, *evt_dirent;
|
2011-01-03 19:50:45 +03:00
|
|
|
char evt_path[MAXPATHLEN];
|
|
|
|
char dir_path[MAXPATHLEN];
|
|
|
|
|
2011-11-16 20:03:07 +04:00
|
|
|
sys_dir = opendir(tracing_events_path);
|
2011-01-03 19:50:45 +03:00
|
|
|
if (!sys_dir)
|
|
|
|
return 0;
|
|
|
|
|
2016-04-08 17:53:02 +03:00
|
|
|
for_each_subsystem(sys_dir, sys_dirent) {
|
2011-01-03 19:50:45 +03:00
|
|
|
|
2011-11-16 20:03:07 +04:00
|
|
|
snprintf(dir_path, MAXPATHLEN, "%s/%s", tracing_events_path,
|
2016-04-08 17:53:02 +03:00
|
|
|
sys_dirent->d_name);
|
2011-01-03 19:50:45 +03:00
|
|
|
evt_dir = opendir(dir_path);
|
|
|
|
if (!evt_dir)
|
|
|
|
continue;
|
|
|
|
|
2016-04-08 17:53:02 +03:00
|
|
|
for_each_event(sys_dirent, evt_dir, evt_dirent) {
|
2011-01-03 19:50:45 +03:00
|
|
|
snprintf(evt_path, MAXPATHLEN, "%s:%s",
|
2016-04-08 17:53:02 +03:00
|
|
|
sys_dirent->d_name, evt_dirent->d_name);
|
2011-01-03 19:50:45 +03:00
|
|
|
if (!strcmp(evt_path, event_string)) {
|
|
|
|
closedir(evt_dir);
|
|
|
|
closedir(sys_dir);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
closedir(evt_dir);
|
|
|
|
}
|
|
|
|
closedir(sys_dir);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-08-27 06:41:53 +04:00
|
|
|
static bool is_event_supported(u8 type, unsigned config)
|
|
|
|
{
|
|
|
|
bool ret = true;
|
2013-12-31 00:39:45 +04:00
|
|
|
int open_return;
|
2013-08-27 06:41:53 +04:00
|
|
|
struct perf_evsel *evsel;
|
|
|
|
struct perf_event_attr attr = {
|
|
|
|
.type = type,
|
|
|
|
.config = config,
|
|
|
|
.disabled = 1,
|
|
|
|
};
|
2017-02-14 16:59:04 +03:00
|
|
|
struct thread_map *tmap = thread_map__new_by_tid(0);
|
|
|
|
|
|
|
|
if (tmap == NULL)
|
|
|
|
return false;
|
2013-08-27 06:41:53 +04:00
|
|
|
|
2013-11-07 23:41:19 +04:00
|
|
|
evsel = perf_evsel__new(&attr);
|
2013-08-27 06:41:53 +04:00
|
|
|
if (evsel) {
|
2017-02-14 16:59:04 +03:00
|
|
|
open_return = perf_evsel__open(evsel, NULL, tmap);
|
2013-12-31 00:39:45 +04:00
|
|
|
ret = open_return >= 0;
|
|
|
|
|
|
|
|
if (open_return == -EACCES) {
|
|
|
|
/*
|
|
|
|
* This happens if the paranoid value
|
|
|
|
* /proc/sys/kernel/perf_event_paranoid is set to 2
|
|
|
|
* Re-run with exclude_kernel set; we don't do that
|
|
|
|
* by default as some ARM machines do not support it.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
evsel->attr.exclude_kernel = 1;
|
2017-02-14 16:59:04 +03:00
|
|
|
ret = perf_evsel__open(evsel, NULL, tmap) >= 0;
|
2013-12-31 00:39:45 +04:00
|
|
|
}
|
2013-08-27 06:41:53 +04:00
|
|
|
perf_evsel__delete(evsel);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-06-24 12:06:46 +03:00
|
|
|
void print_sdt_events(const char *subsys_glob, const char *event_glob,
|
|
|
|
bool name_only)
|
|
|
|
{
|
|
|
|
struct probe_cache *pcache;
|
|
|
|
struct probe_cache_entry *ent;
|
|
|
|
struct strlist *bidlist, *sdtlist;
|
|
|
|
struct strlist_config cfg = {.dont_dupstr = true};
|
|
|
|
struct str_node *nd, *nd2;
|
|
|
|
char *buf, *path, *ptr = NULL;
|
|
|
|
bool show_detail = false;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
sdtlist = strlist__new(NULL, &cfg);
|
|
|
|
if (!sdtlist) {
|
|
|
|
pr_debug("Failed to allocate new strlist for SDT\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
bidlist = build_id_cache__list_all(true);
|
|
|
|
if (!bidlist) {
|
|
|
|
pr_debug("Failed to get buildids: %d\n", errno);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
strlist__for_each_entry(nd, bidlist) {
|
2017-07-06 04:48:11 +03:00
|
|
|
pcache = probe_cache__new(nd->s, NULL);
|
2016-06-24 12:06:46 +03:00
|
|
|
if (!pcache)
|
|
|
|
continue;
|
|
|
|
list_for_each_entry(ent, &pcache->entries, node) {
|
|
|
|
if (!ent->sdt)
|
|
|
|
continue;
|
|
|
|
if (subsys_glob &&
|
|
|
|
!strglobmatch(ent->pev.group, subsys_glob))
|
|
|
|
continue;
|
|
|
|
if (event_glob &&
|
|
|
|
!strglobmatch(ent->pev.event, event_glob))
|
|
|
|
continue;
|
|
|
|
ret = asprintf(&buf, "%s:%s@%s", ent->pev.group,
|
|
|
|
ent->pev.event, nd->s);
|
|
|
|
if (ret > 0)
|
|
|
|
strlist__add(sdtlist, buf);
|
|
|
|
}
|
|
|
|
probe_cache__delete(pcache);
|
|
|
|
}
|
|
|
|
strlist__delete(bidlist);
|
|
|
|
|
|
|
|
strlist__for_each_entry(nd, sdtlist) {
|
|
|
|
buf = strchr(nd->s, '@');
|
|
|
|
if (buf)
|
|
|
|
*(buf++) = '\0';
|
|
|
|
if (name_only) {
|
|
|
|
printf("%s ", nd->s);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
nd2 = strlist__next(nd);
|
|
|
|
if (nd2) {
|
|
|
|
ptr = strchr(nd2->s, '@');
|
|
|
|
if (ptr)
|
|
|
|
*ptr = '\0';
|
|
|
|
if (strcmp(nd->s, nd2->s) == 0)
|
|
|
|
show_detail = true;
|
|
|
|
}
|
|
|
|
if (show_detail) {
|
|
|
|
path = build_id_cache__origname(buf);
|
|
|
|
ret = asprintf(&buf, "%s@%s(%.12s)", nd->s, path, buf);
|
|
|
|
if (ret > 0) {
|
|
|
|
printf(" %-50s [%s]\n", buf, "SDT event");
|
|
|
|
free(buf);
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
printf(" %-50s [%s]\n", nd->s, "SDT event");
|
|
|
|
if (nd2) {
|
|
|
|
if (strcmp(nd->s, nd2->s) != 0)
|
|
|
|
show_detail = false;
|
|
|
|
if (ptr)
|
|
|
|
*ptr = '@';
|
|
|
|
}
|
|
|
|
}
|
|
|
|
strlist__delete(sdtlist);
|
|
|
|
}
|
|
|
|
|
2012-08-09 18:31:52 +04:00
|
|
|
int print_hwcache_events(const char *event_glob, bool name_only)
|
2011-02-17 20:38:58 +03:00
|
|
|
{
|
2015-02-27 13:21:25 +03:00
|
|
|
unsigned int type, op, i, evt_i = 0, evt_num = 0;
|
2012-06-11 21:08:07 +04:00
|
|
|
char name[64];
|
2015-02-27 13:21:25 +03:00
|
|
|
char **evt_list = NULL;
|
|
|
|
bool evt_num_known = false;
|
|
|
|
|
|
|
|
restart:
|
|
|
|
if (evt_num_known) {
|
|
|
|
evt_list = zalloc(sizeof(char *) * evt_num);
|
|
|
|
if (!evt_list)
|
|
|
|
goto out_enomem;
|
|
|
|
}
|
2011-02-17 20:38:58 +03:00
|
|
|
|
|
|
|
for (type = 0; type < PERF_COUNT_HW_CACHE_MAX; type++) {
|
|
|
|
for (op = 0; op < PERF_COUNT_HW_CACHE_OP_MAX; op++) {
|
|
|
|
/* skip invalid cache type */
|
2012-06-11 21:08:07 +04:00
|
|
|
if (!perf_evsel__is_cache_op_valid(type, op))
|
2011-02-17 20:38:58 +03:00
|
|
|
continue;
|
|
|
|
|
|
|
|
for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
|
2012-06-11 21:08:07 +04:00
|
|
|
__perf_evsel__hw_cache_type_op_res_name(type, op, i,
|
|
|
|
name, sizeof(name));
|
2011-04-30 00:52:42 +04:00
|
|
|
if (event_glob != NULL && !strglobmatch(name, event_glob))
|
2011-02-17 20:38:58 +03:00
|
|
|
continue;
|
|
|
|
|
2013-08-27 06:41:53 +04:00
|
|
|
if (!is_event_supported(PERF_TYPE_HW_CACHE,
|
|
|
|
type | (op << 8) | (i << 16)))
|
|
|
|
continue;
|
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
if (!evt_num_known) {
|
|
|
|
evt_num++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
evt_list[evt_i] = strdup(name);
|
|
|
|
if (evt_list[evt_i] == NULL)
|
|
|
|
goto out_enomem;
|
|
|
|
evt_i++;
|
2011-02-17 20:38:58 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
if (!evt_num_known) {
|
|
|
|
evt_num_known = true;
|
|
|
|
goto restart;
|
|
|
|
}
|
|
|
|
qsort(evt_list, evt_num, sizeof(char *), cmp_string);
|
|
|
|
evt_i = 0;
|
|
|
|
while (evt_i < evt_num) {
|
|
|
|
if (name_only) {
|
|
|
|
printf("%s ", evt_list[evt_i++]);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
printf(" %-50s [%s]\n", evt_list[evt_i++],
|
|
|
|
event_type_descriptors[PERF_TYPE_HW_CACHE]);
|
|
|
|
}
|
2015-09-30 23:13:26 +03:00
|
|
|
if (evt_num && pager_in_use())
|
2013-04-20 22:02:29 +04:00
|
|
|
printf("\n");
|
2015-02-27 13:21:25 +03:00
|
|
|
|
|
|
|
out_free:
|
|
|
|
evt_num = evt_i;
|
|
|
|
for (evt_i = 0; evt_i < evt_num; evt_i++)
|
|
|
|
zfree(&evt_list[evt_i]);
|
|
|
|
zfree(&evt_list);
|
|
|
|
return evt_num;
|
|
|
|
|
|
|
|
out_enomem:
|
|
|
|
printf("FATAL: not enough memory to print %s\n", event_type_descriptors[PERF_TYPE_HW_CACHE]);
|
|
|
|
if (evt_list)
|
|
|
|
goto out_free;
|
|
|
|
return evt_num;
|
2011-02-17 20:38:58 +03:00
|
|
|
}
|
|
|
|
|
2015-02-27 13:21:27 +03:00
|
|
|
void print_symbol_events(const char *event_glob, unsigned type,
|
2012-08-09 18:31:52 +04:00
|
|
|
struct event_symbol *syms, unsigned max,
|
|
|
|
bool name_only)
|
2009-05-26 13:10:09 +04:00
|
|
|
{
|
2015-02-27 13:21:25 +03:00
|
|
|
unsigned int i, evt_i = 0, evt_num = 0;
|
2011-04-30 00:52:42 +04:00
|
|
|
char name[MAX_NAME_LEN];
|
2015-02-27 13:21:25 +03:00
|
|
|
char **evt_list = NULL;
|
|
|
|
bool evt_num_known = false;
|
|
|
|
|
|
|
|
restart:
|
|
|
|
if (evt_num_known) {
|
|
|
|
evt_list = zalloc(sizeof(char *) * evt_num);
|
|
|
|
if (!evt_list)
|
|
|
|
goto out_enomem;
|
|
|
|
syms -= max;
|
|
|
|
}
|
2009-05-26 13:10:09 +04:00
|
|
|
|
2012-07-04 02:00:44 +04:00
|
|
|
for (i = 0; i < max; i++, syms++) {
|
2011-02-17 20:38:58 +03:00
|
|
|
|
perf list: Robustify event printing routine
When a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") added
PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw
array that wasn't initialized, thus set to NULL, fix print_symbol_events()
to check for that case so that we don't crash if this happens again.
(gdb) bt
#0 __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198
#1 strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252
#2 0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall")
at util/parse-events.c:1615
#3 print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675
#4 0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68
#5 0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370
#6 0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429
#7 run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473
#8 main (argc=2, argv=0x7fffffffe390) at perf.c:588
(gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT]
$4 = {symbol = 0x0, alias = 0x0}
(gdb)
A patch to robustify perf to not segfault when the next counter gets added in
the kernel will follow this one.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-57wysblcjfrseb0zg5u7ek10@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-27 22:04:58 +03:00
|
|
|
if (event_glob != NULL && syms->symbol != NULL &&
|
2011-02-17 20:38:58 +03:00
|
|
|
!(strglobmatch(syms->symbol, event_glob) ||
|
|
|
|
(syms->alias && strglobmatch(syms->alias, event_glob))))
|
|
|
|
continue;
|
2009-05-26 13:10:09 +04:00
|
|
|
|
2013-08-27 06:41:53 +04:00
|
|
|
if (!is_event_supported(type, i))
|
|
|
|
continue;
|
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
if (!evt_num_known) {
|
|
|
|
evt_num++;
|
2012-08-09 18:31:52 +04:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
if (!name_only && strlen(syms->alias))
|
2011-04-30 00:52:42 +04:00
|
|
|
snprintf(name, MAX_NAME_LEN, "%s OR %s", syms->symbol, syms->alias);
|
2009-06-22 15:14:28 +04:00
|
|
|
else
|
2011-04-30 00:52:42 +04:00
|
|
|
strncpy(name, syms->symbol, MAX_NAME_LEN);
|
2009-05-26 13:10:09 +04:00
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
evt_list[evt_i] = strdup(name);
|
|
|
|
if (evt_list[evt_i] == NULL)
|
|
|
|
goto out_enomem;
|
|
|
|
evt_i++;
|
2009-05-26 13:10:09 +04:00
|
|
|
}
|
|
|
|
|
2015-02-27 13:21:25 +03:00
|
|
|
if (!evt_num_known) {
|
|
|
|
evt_num_known = true;
|
|
|
|
goto restart;
|
|
|
|
}
|
|
|
|
qsort(evt_list, evt_num, sizeof(char *), cmp_string);
|
|
|
|
evt_i = 0;
|
|
|
|
while (evt_i < evt_num) {
|
|
|
|
if (name_only) {
|
|
|
|
printf("%s ", evt_list[evt_i++]);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
printf(" %-50s [%s]\n", evt_list[evt_i++], event_type_descriptors[type]);
|
|
|
|
}
|
2015-09-30 23:13:26 +03:00
|
|
|
if (evt_num && pager_in_use())
|
2011-02-17 20:38:58 +03:00
|
|
|
printf("\n");
|
2015-02-27 13:21:25 +03:00
|
|
|
|
|
|
|
out_free:
|
|
|
|
evt_num = evt_i;
|
|
|
|
for (evt_i = 0; evt_i < evt_num; evt_i++)
|
|
|
|
zfree(&evt_list[evt_i]);
|
|
|
|
zfree(&evt_list);
|
|
|
|
return;
|
|
|
|
|
|
|
|
out_enomem:
|
|
|
|
printf("FATAL: not enough memory to print %s\n", event_type_descriptors[type]);
|
|
|
|
if (evt_list)
|
|
|
|
goto out_free;
|
2012-07-04 02:00:44 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print the help text for the event symbols:
|
|
|
|
*/
|
2016-09-16 01:24:48 +03:00
|
|
|
void print_events(const char *event_glob, bool name_only, bool quiet_flag,
|
2017-03-20 23:17:11 +03:00
|
|
|
bool long_desc, bool details_flag)
|
2012-07-04 02:00:44 +04:00
|
|
|
{
|
|
|
|
print_symbol_events(event_glob, PERF_TYPE_HARDWARE,
|
2012-08-09 18:31:52 +04:00
|
|
|
event_symbols_hw, PERF_COUNT_HW_MAX, name_only);
|
2012-07-04 02:00:44 +04:00
|
|
|
|
|
|
|
print_symbol_events(event_glob, PERF_TYPE_SOFTWARE,
|
2012-08-09 18:31:52 +04:00
|
|
|
event_symbols_sw, PERF_COUNT_SW_MAX, name_only);
|
2012-07-04 02:00:44 +04:00
|
|
|
|
2012-08-09 18:31:52 +04:00
|
|
|
print_hwcache_events(event_glob, name_only);
|
2011-02-17 20:38:58 +03:00
|
|
|
|
2017-03-20 23:17:11 +03:00
|
|
|
print_pmu_events(event_glob, name_only, quiet_flag, long_desc,
|
|
|
|
details_flag);
|
2013-04-20 22:02:29 +04:00
|
|
|
|
2011-02-17 20:38:58 +03:00
|
|
|
if (event_glob != NULL)
|
|
|
|
return;
|
2009-07-01 17:06:18 +04:00
|
|
|
|
2012-08-09 18:31:52 +04:00
|
|
|
if (!name_only) {
|
|
|
|
printf(" %-50s [%s]\n",
|
|
|
|
"rNNN",
|
|
|
|
event_type_descriptors[PERF_TYPE_RAW]);
|
|
|
|
printf(" %-50s [%s]\n",
|
|
|
|
"cpu/t1=v1[,t2=v2,t3 ...]/modifier",
|
|
|
|
event_type_descriptors[PERF_TYPE_RAW]);
|
2015-09-30 23:13:26 +03:00
|
|
|
if (pager_in_use())
|
|
|
|
printf(" (see 'man perf-list' on how to encode it)\n\n");
|
2012-08-09 18:31:52 +04:00
|
|
|
|
|
|
|
printf(" %-50s [%s]\n",
|
2014-05-29 19:26:51 +04:00
|
|
|
"mem:<addr>[/len][:access]",
|
2009-12-29 11:37:07 +03:00
|
|
|
event_type_descriptors[PERF_TYPE_BREAKPOINT]);
|
2015-09-30 23:13:26 +03:00
|
|
|
if (pager_in_use())
|
|
|
|
printf("\n");
|
2012-08-09 18:31:52 +04:00
|
|
|
}
|
2009-11-23 17:42:35 +03:00
|
|
|
|
2012-08-09 18:31:52 +04:00
|
|
|
print_tracepoint_events(NULL, NULL, name_only);
|
2016-06-24 12:06:46 +03:00
|
|
|
|
|
|
|
print_sdt_events(NULL, NULL, name_only);
|
2017-08-31 22:40:32 +03:00
|
|
|
|
|
|
|
metricgroup__print(true, true, NULL, name_only);
|
2009-05-26 13:10:09 +04:00
|
|
|
}
|
2012-03-15 23:09:16 +04:00
|
|
|
|
2013-01-18 23:29:49 +04:00
|
|
|
int parse_events__is_hardcoded_term(struct parse_events_term *term)
|
2012-03-15 23:09:16 +04:00
|
|
|
{
|
2012-04-25 20:24:57 +04:00
|
|
|
return term->type_term != PARSE_EVENTS__TERM_TYPE_USER;
|
2012-03-15 23:09:16 +04:00
|
|
|
}
|
|
|
|
|
2017-02-17 17:00:55 +03:00
|
|
|
static int new_term(struct parse_events_term **_term,
|
|
|
|
struct parse_events_term *temp,
|
|
|
|
char *str, u64 num)
|
2012-03-15 23:09:16 +04:00
|
|
|
{
|
2013-01-18 23:29:49 +04:00
|
|
|
struct parse_events_term *term;
|
2012-03-15 23:09:16 +04:00
|
|
|
|
2017-02-17 17:00:55 +03:00
|
|
|
term = malloc(sizeof(*term));
|
2012-03-15 23:09:16 +04:00
|
|
|
if (!term)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2017-02-17 17:00:55 +03:00
|
|
|
*term = *temp;
|
2012-03-15 23:09:16 +04:00
|
|
|
INIT_LIST_HEAD(&term->list);
|
2017-10-20 23:27:55 +03:00
|
|
|
term->weak = false;
|
2012-03-15 23:09:16 +04:00
|
|
|
|
2017-02-17 17:00:55 +03:00
|
|
|
switch (term->type_val) {
|
2012-03-15 23:09:16 +04:00
|
|
|
case PARSE_EVENTS__TERM_TYPE_NUM:
|
|
|
|
term->val.num = num;
|
|
|
|
break;
|
|
|
|
case PARSE_EVENTS__TERM_TYPE_STR:
|
|
|
|
term->val.str = str;
|
|
|
|
break;
|
|
|
|
default:
|
2013-07-04 17:20:24 +04:00
|
|
|
free(term);
|
2012-03-15 23:09:16 +04:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
*_term = term;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-01-18 23:29:49 +04:00
|
|
|
int parse_events_term__num(struct parse_events_term **term,
|
2015-04-22 22:10:20 +03:00
|
|
|
int type_term, char *config, u64 num,
|
2017-02-17 17:00:56 +03:00
|
|
|
bool no_value,
|
2015-05-19 16:05:42 +03:00
|
|
|
void *loc_term_, void *loc_val_)
|
2012-04-25 20:24:57 +04:00
|
|
|
{
|
2015-05-19 16:05:42 +03:00
|
|
|
YYLTYPE *loc_term = loc_term_;
|
|
|
|
YYLTYPE *loc_val = loc_val_;
|
|
|
|
|
2017-02-17 17:00:55 +03:00
|
|
|
struct parse_events_term temp = {
|
|
|
|
.type_val = PARSE_EVENTS__TERM_TYPE_NUM,
|
|
|
|
.type_term = type_term,
|
|
|
|
.config = config,
|
2017-02-17 17:00:56 +03:00
|
|
|
.no_value = no_value,
|
2017-02-17 17:00:55 +03:00
|
|
|
.err_term = loc_term ? loc_term->first_column : 0,
|
|
|
|
.err_val = loc_val ? loc_val->first_column : 0,
|
|
|
|
};
|
|
|
|
|
|
|
|
return new_term(term, &temp, NULL, num);
|
2012-04-25 20:24:57 +04:00
|
|
|
}
|
|
|
|
|
2013-01-18 23:29:49 +04:00
|
|
|
int parse_events_term__str(struct parse_events_term **term,
|
2015-04-22 22:10:20 +03:00
|
|
|
int type_term, char *config, char *str,
|
2015-05-19 16:05:42 +03:00
|
|
|
void *loc_term_, void *loc_val_)
|
2012-04-25 20:24:57 +04:00
|
|
|
{
|
2015-05-19 16:05:42 +03:00
|
|
|
YYLTYPE *loc_term = loc_term_;
|
|
|
|
YYLTYPE *loc_val = loc_val_;
|
|
|
|
|
2017-02-17 17:00:55 +03:00
|
|
|
struct parse_events_term temp = {
|
|
|
|
.type_val = PARSE_EVENTS__TERM_TYPE_STR,
|
|
|
|
.type_term = type_term,
|
|
|
|
.config = config,
|
|
|
|
.err_term = loc_term ? loc_term->first_column : 0,
|
|
|
|
.err_val = loc_val ? loc_val->first_column : 0,
|
|
|
|
};
|
|
|
|
|
|
|
|
return new_term(term, &temp, str, 0);
|
2012-04-25 20:24:57 +04:00
|
|
|
}
|
|
|
|
|
2013-01-18 23:29:49 +04:00
|
|
|
int parse_events_term__sym_hw(struct parse_events_term **term,
|
2012-10-10 16:53:17 +04:00
|
|
|
char *config, unsigned idx)
|
|
|
|
{
|
|
|
|
struct event_symbol *sym;
|
2017-02-17 17:00:55 +03:00
|
|
|
struct parse_events_term temp = {
|
|
|
|
.type_val = PARSE_EVENTS__TERM_TYPE_STR,
|
|
|
|
.type_term = PARSE_EVENTS__TERM_TYPE_USER,
|
|
|
|
.config = config ?: (char *) "event",
|
|
|
|
};
|
2012-10-10 16:53:17 +04:00
|
|
|
|
|
|
|
BUG_ON(idx >= PERF_COUNT_HW_MAX);
|
|
|
|
sym = &event_symbols_hw[idx];
|
|
|
|
|
2017-02-17 17:00:55 +03:00
|
|
|
return new_term(term, &temp, (char *) sym->symbol, 0);
|
2012-10-10 16:53:17 +04:00
|
|
|
}
|
|
|
|
|
2013-01-18 23:29:49 +04:00
|
|
|
int parse_events_term__clone(struct parse_events_term **new,
|
|
|
|
struct parse_events_term *term)
|
2012-06-15 10:31:41 +04:00
|
|
|
{
|
2017-02-17 17:00:55 +03:00
|
|
|
struct parse_events_term temp = {
|
|
|
|
.type_val = term->type_val,
|
|
|
|
.type_term = term->type_term,
|
|
|
|
.config = term->config,
|
|
|
|
.err_term = term->err_term,
|
|
|
|
.err_val = term->err_val,
|
|
|
|
};
|
|
|
|
|
|
|
|
return new_term(new, &temp, term->val.str, term->val.num);
|
2012-06-15 10:31:41 +04:00
|
|
|
}
|
|
|
|
|
perf pmu: Expand PMU events by prefix match
When the user specifies a pmu directly, expand it automatically with a
prefix match for all available PMUs, similar as we do for the normal
aliases now.
This allows to specify attributes for duplicated boxes quickly. For
example uncore_cbox_{0,6}/.../ can be now specified as uncore_cbox/.../
and it gets automatically expanded for all boxes.
This generally makes it more concise to write uncore specifications, and
also avoids the need to know the exact topology of the system.
Before:
% perf stat -a -e uncore_cbox_0/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_1/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_2/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_3/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_4/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_5/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
After:
% perf stat -a -e uncore_cbox/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
v2: Handle all bison rules. Move multi add code to separate function.
Handle uncore_ prefix correctly.
v3: Move parse_events_multi_pmu_add to separate patch. Move uncore
prefix check to separate patch.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-20 23:17:03 +03:00
|
|
|
int parse_events_copy_term_list(struct list_head *old,
|
|
|
|
struct list_head **new)
|
|
|
|
{
|
|
|
|
struct parse_events_term *term, *n;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!old) {
|
|
|
|
*new = NULL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
*new = malloc(sizeof(struct list_head));
|
|
|
|
if (!*new)
|
|
|
|
return -ENOMEM;
|
|
|
|
INIT_LIST_HEAD(*new);
|
|
|
|
|
|
|
|
list_for_each_entry (term, old, list) {
|
|
|
|
ret = parse_events_term__clone(&n, term);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
list_add_tail(&n->list, *new);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-02-12 22:43:02 +03:00
|
|
|
void parse_events_terms__purge(struct list_head *terms)
|
2012-03-15 23:09:16 +04:00
|
|
|
{
|
2013-01-18 23:29:49 +04:00
|
|
|
struct parse_events_term *term, *h;
|
2012-03-15 23:09:16 +04:00
|
|
|
|
2016-02-12 22:31:23 +03:00
|
|
|
list_for_each_entry_safe(term, h, terms, list) {
|
2016-02-22 12:10:34 +03:00
|
|
|
if (term->array.nr_ranges)
|
2017-02-01 15:34:07 +03:00
|
|
|
zfree(&term->array.ranges);
|
2016-02-12 22:31:23 +03:00
|
|
|
list_del_init(&term->list);
|
2012-03-15 23:09:16 +04:00
|
|
|
free(term);
|
2016-02-12 22:31:23 +03:00
|
|
|
}
|
2012-03-15 23:09:16 +04:00
|
|
|
}
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
|
2016-02-12 23:09:17 +03:00
|
|
|
void parse_events_terms__delete(struct list_head *terms)
|
2016-02-12 22:43:02 +03:00
|
|
|
{
|
2016-02-12 23:09:17 +03:00
|
|
|
if (!terms)
|
|
|
|
return;
|
2016-02-12 22:43:02 +03:00
|
|
|
parse_events_terms__purge(terms);
|
2016-02-12 23:01:17 +03:00
|
|
|
free(terms);
|
2016-02-12 22:43:02 +03:00
|
|
|
}
|
|
|
|
|
2016-02-22 12:10:34 +03:00
|
|
|
void parse_events__clear_array(struct parse_events_array *a)
|
|
|
|
{
|
2017-02-01 15:34:07 +03:00
|
|
|
zfree(&a->ranges);
|
2016-02-22 12:10:34 +03:00
|
|
|
}
|
|
|
|
|
2017-08-17 22:13:34 +03:00
|
|
|
void parse_events_evlist_error(struct parse_events_state *parse_state,
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
int idx, const char *str)
|
|
|
|
{
|
2017-08-17 22:13:34 +03:00
|
|
|
struct parse_events_error *err = parse_state->error;
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
|
2015-05-19 16:05:44 +03:00
|
|
|
if (!err)
|
|
|
|
return;
|
perf tools: Add parse_events_error interface
Adding support to return error information from parse_events function.
Following struct will be populated by parse_events function on return:
struct parse_events_error {
int idx;
char *str;
char *help;
};
where 'idx' is the position in the string where the parsing failed,
'str' contains dynamically allocated error string describing the error
and 'help' is optional help string.
The change contains reporting function, which currently does not display
anything. The code changes to supply error data for specific event types
are coming in next patches. However this is what the expected output is:
$ sudo perf record -e 'sched:krava' ls
event syntax error: 'sched:krava'
\___ unknown tracepoint
...
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
...
$ perf record -e cycles,cache-mises ls
event syntax error: '..es,cache-mises'
\___ parser error
...
The output functions cut the beginning of the event string so the error
starts up to 10th character and cut the end of the string of it crosses
the terminal width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-2-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-22 22:10:16 +03:00
|
|
|
err->idx = idx;
|
|
|
|
err->str = strdup(str);
|
|
|
|
WARN_ONCE(!err->str, "WARNING: failed to allocate error string");
|
|
|
|
}
|
perf tools: Show proper error message for wrong terms of hw/sw events
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 06:52:14 +03:00
|
|
|
|
2016-02-19 14:43:57 +03:00
|
|
|
static void config_terms_list(char *buf, size_t buf_sz)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
bool first = true;
|
|
|
|
|
|
|
|
buf[0] = '\0';
|
|
|
|
for (i = 0; i < __PARSE_EVENTS__TERM_TYPE_NR; i++) {
|
|
|
|
const char *name = config_term_names[i];
|
|
|
|
|
perf stat: Bail out on unsupported event config modifiers
'perf stat' accepts some config terms but doesn't apply them. For
example:
# perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
# ls
# exit
Performance counter stats for 'bash':
266258061 instructions/no-inherit/
266258061 instructions/inherit/
1.402183915 seconds time elapsed
The result is confusing, because user may expect the first
'instructions' event exclude the 'ls' command.
This patch forbid most of these config terms for 'perf stat'.
Result:
# ./perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
event syntax error: 'instructions/no-inherit/'
\___ 'no-inherit' is not usable in 'perf stat'
...
We can add blocked config terms back when 'perf stat' really supports them.
This patch also removes unavailable config term from error message:
# ./perf stat -e 'instructions/badterm/' ls
event syntax error: 'instructions/badterm/'
\___ unknown term
valid terms: config,config1,config2,name
# ./perf stat -e 'cpu/badterm/' ls
event syntax error: 'cpu/badterm/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-19 14:43:58 +03:00
|
|
|
if (!config_term_avail(i, NULL))
|
|
|
|
continue;
|
2016-02-19 14:43:57 +03:00
|
|
|
if (!name)
|
|
|
|
continue;
|
|
|
|
if (name[0] == '<')
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (strlen(buf) + strlen(name) + 2 >= buf_sz)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (!first)
|
|
|
|
strcat(buf, ",");
|
|
|
|
else
|
|
|
|
first = false;
|
|
|
|
strcat(buf, name);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
perf tools: Show proper error message for wrong terms of hw/sw events
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 06:52:14 +03:00
|
|
|
/*
|
|
|
|
* Return string contains valid config terms of an event.
|
|
|
|
* @additional_terms: For terms such as PMU sysfs terms.
|
|
|
|
*/
|
|
|
|
char *parse_events_formats_error_string(char *additional_terms)
|
|
|
|
{
|
|
|
|
char *str;
|
perf tools: Enable overwrite settings
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 11:34:45 +03:00
|
|
|
/* "no-overwrite" is the longest name */
|
2016-02-19 14:43:57 +03:00
|
|
|
char static_terms[__PARSE_EVENTS__TERM_TYPE_NR *
|
perf tools: Enable overwrite settings
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 11:34:45 +03:00
|
|
|
(sizeof("no-overwrite") - 1)];
|
perf tools: Show proper error message for wrong terms of hw/sw events
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 06:52:14 +03:00
|
|
|
|
2016-02-19 14:43:57 +03:00
|
|
|
config_terms_list(static_terms, sizeof(static_terms));
|
perf tools: Show proper error message for wrong terms of hw/sw events
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 06:52:14 +03:00
|
|
|
/* valid terms */
|
|
|
|
if (additional_terms) {
|
2016-02-19 14:43:52 +03:00
|
|
|
if (asprintf(&str, "valid terms: %s,%s",
|
|
|
|
additional_terms, static_terms) < 0)
|
perf tools: Show proper error message for wrong terms of hw/sw events
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 06:52:14 +03:00
|
|
|
goto fail;
|
|
|
|
} else {
|
2016-02-19 14:43:52 +03:00
|
|
|
if (asprintf(&str, "valid terms: %s", static_terms) < 0)
|
perf tools: Show proper error message for wrong terms of hw/sw events
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 06:52:14 +03:00
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
return str;
|
|
|
|
|
|
|
|
fail:
|
|
|
|
return NULL;
|
|
|
|
}
|