WSL2-Linux-Kernel/drivers/video/gbefb.c

1317 строки
33 KiB
C
Исходник Обычный вид История

/*
* SGI GBE frame buffer driver
*
* Copyright (C) 1999 Silicon Graphics, Inc. - Jeffrey Newquist
* Copyright (C) 2002 Vivien Chappelier <vivien.chappelier@linux-mips.org>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/gfp.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#ifdef CONFIG_X86
#include <asm/mtrr.h>
#endif
#ifdef CONFIG_MIPS
#include <asm/addrspace.h>
#endif
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <video/gbe.h>
static struct sgi_gbe *gbe;
struct gbefb_par {
struct fb_var_screeninfo var;
struct gbe_timing_info timing;
int valid;
};
#ifdef CONFIG_SGI_IP32
#define GBE_BASE 0x16000000 /* SGI O2 */
#endif
#ifdef CONFIG_X86_VISWS
#define GBE_BASE 0xd0000000 /* SGI Visual Workstation */
#endif
/* macro for fastest write-though access to the framebuffer */
#ifdef CONFIG_MIPS
#ifdef CONFIG_CPU_R10000
#define pgprot_fb(_prot) (((_prot) & (~_CACHE_MASK)) | _CACHE_UNCACHED_ACCELERATED)
#else
#define pgprot_fb(_prot) (((_prot) & (~_CACHE_MASK)) | _CACHE_CACHABLE_NO_WA)
#endif
#endif
#ifdef CONFIG_X86
#define pgprot_fb(_prot) ((_prot) | _PAGE_PCD)
#endif
/*
* RAM we reserve for the frame buffer. This defines the maximum screen
* size
*/
#if CONFIG_FB_GBE_MEM > 8
#error GBE Framebuffer cannot use more than 8MB of memory
#endif
#define TILE_SHIFT 16
#define TILE_SIZE (1 << TILE_SHIFT)
#define TILE_MASK (TILE_SIZE - 1)
static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
static void *gbe_mem;
static dma_addr_t gbe_dma_addr;
static unsigned long gbe_mem_phys;
static struct {
uint16_t *cpu;
dma_addr_t dma;
} gbe_tiles;
static int gbe_revision;
static int ypan, ywrap;
static uint32_t pseudo_palette[16];
static uint32_t gbe_cmap[256];
static int gbe_turned_on; /* 0 turned off, 1 turned on */
VIDEO. gbefb: Fix section mismatches. WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26 22:08:13 +04:00
static char *mode_option __devinitdata = NULL;
/* default CRT mode */
VIDEO. gbefb: Fix section mismatches. WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26 22:08:13 +04:00
static struct fb_var_screeninfo default_var_CRT __devinitdata = {
/* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
.xres = 640,
.yres = 480,
.xres_virtual = 640,
.yres_virtual = 480,
.xoffset = 0,
.yoffset = 0,
.bits_per_pixel = 8,
.grayscale = 0,
.red = { 0, 8, 0 },
.green = { 0, 8, 0 },
.blue = { 0, 8, 0 },
.transp = { 0, 0, 0 },
.nonstd = 0,
.activate = 0,
.height = -1,
.width = -1,
.accel_flags = 0,
.pixclock = 39722, /* picoseconds */
.left_margin = 48,
.right_margin = 16,
.upper_margin = 33,
.lower_margin = 10,
.hsync_len = 96,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
};
/* default LCD mode */
VIDEO. gbefb: Fix section mismatches. WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26 22:08:13 +04:00
static struct fb_var_screeninfo default_var_LCD __devinitdata = {
/* 1600x1024, 8 bpp */
.xres = 1600,
.yres = 1024,
.xres_virtual = 1600,
.yres_virtual = 1024,
.xoffset = 0,
.yoffset = 0,
.bits_per_pixel = 8,
.grayscale = 0,
.red = { 0, 8, 0 },
.green = { 0, 8, 0 },
.blue = { 0, 8, 0 },
.transp = { 0, 0, 0 },
.nonstd = 0,
.activate = 0,
.height = -1,
.width = -1,
.accel_flags = 0,
.pixclock = 9353,
.left_margin = 20,
.right_margin = 30,
.upper_margin = 37,
.lower_margin = 3,
.hsync_len = 20,
.vsync_len = 3,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
};
/* default modedb mode */
/* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
VIDEO. gbefb: Fix section mismatches. WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26 22:08:13 +04:00
static struct fb_videomode default_mode_CRT __devinitdata = {
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39722,
.left_margin = 48,
.right_margin = 16,
.upper_margin = 33,
.lower_margin = 10,
.hsync_len = 96,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
};
/* 1600x1024 SGI flatpanel 1600sw */
VIDEO. gbefb: Fix section mismatches. WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26 22:08:13 +04:00
static struct fb_videomode default_mode_LCD __devinitdata = {
/* 1600x1024, 8 bpp */
.xres = 1600,
.yres = 1024,
.pixclock = 9353,
.left_margin = 20,
.right_margin = 30,
.upper_margin = 37,
.lower_margin = 3,
.hsync_len = 20,
.vsync_len = 3,
.vmode = FB_VMODE_NONINTERLACED,
};
VIDEO. gbefb: Fix section mismatches. WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26 22:08:13 +04:00
static struct fb_videomode *default_mode __devinitdata = &default_mode_CRT;
static struct fb_var_screeninfo *default_var __devinitdata = &default_var_CRT;
static int flat_panel_enabled = 0;
static void gbe_reset(void)
{
/* Turn on dotclock PLL */
gbe->ctrlstat = 0x300aa000;
}
/*
* Function: gbe_turn_off
* Parameters: (None)
* Description: This should turn off the monitor and gbe. This is used
* when switching between the serial console and the graphics
* console.
*/
static void gbe_turn_off(void)
{
int i;
unsigned int val, x, y, vpixen_off;
gbe_turned_on = 0;
/* check if pixel counter is on */
val = gbe->vt_xy;
if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1)
return;
/* turn off DMA */
val = gbe->ovr_control;
SET_GBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, val, 0);
gbe->ovr_control = val;
udelay(1000);
val = gbe->frm_control;
SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 0);
gbe->frm_control = val;
udelay(1000);
val = gbe->did_control;
SET_GBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, val, 0);
gbe->did_control = val;
udelay(1000);
/* We have to wait through two vertical retrace periods before
* the pixel DMA is turned off for sure. */
for (i = 0; i < 10000; i++) {
val = gbe->frm_inhwctrl;
if (GET_GBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, val)) {
udelay(10);
} else {
val = gbe->ovr_inhwctrl;
if (GET_GBE_FIELD(OVR_INHWCTRL, OVR_DMA_ENABLE, val)) {
udelay(10);
} else {
val = gbe->did_inhwctrl;
if (GET_GBE_FIELD(DID_INHWCTRL, DID_DMA_ENABLE, val)) {
udelay(10);
} else
break;
}
}
}
if (i == 10000)
printk(KERN_ERR "gbefb: turn off DMA timed out\n");
/* wait for vpixen_off */
val = gbe->vt_vpixen;
vpixen_off = GET_GBE_FIELD(VT_VPIXEN, VPIXEN_OFF, val);
for (i = 0; i < 100000; i++) {
val = gbe->vt_xy;
x = GET_GBE_FIELD(VT_XY, X, val);
y = GET_GBE_FIELD(VT_XY, Y, val);
if (y < vpixen_off)
break;
udelay(1);
}
if (i == 100000)
printk(KERN_ERR
"gbefb: wait for vpixen_off timed out\n");
for (i = 0; i < 10000; i++) {
val = gbe->vt_xy;
x = GET_GBE_FIELD(VT_XY, X, val);
y = GET_GBE_FIELD(VT_XY, Y, val);
if (y > vpixen_off)
break;
udelay(1);
}
if (i == 10000)
printk(KERN_ERR "gbefb: wait for vpixen_off timed out\n");
/* turn off pixel counter */
val = 0;
SET_GBE_FIELD(VT_XY, FREEZE, val, 1);
gbe->vt_xy = val;
udelay(10000);
for (i = 0; i < 10000; i++) {
val = gbe->vt_xy;
if (GET_GBE_FIELD(VT_XY, FREEZE, val) != 1)
udelay(10);
else
break;
}
if (i == 10000)
printk(KERN_ERR "gbefb: turn off pixel clock timed out\n");
/* turn off dot clock */
val = gbe->dotclock;
SET_GBE_FIELD(DOTCLK, RUN, val, 0);
gbe->dotclock = val;
udelay(10000);
for (i = 0; i < 10000; i++) {
val = gbe->dotclock;
if (GET_GBE_FIELD(DOTCLK, RUN, val))
udelay(10);
else
break;
}
if (i == 10000)
printk(KERN_ERR "gbefb: turn off dotclock timed out\n");
/* reset the frame DMA FIFO */
val = gbe->frm_size_tile;
SET_GBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, val, 1);
gbe->frm_size_tile = val;
SET_GBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, val, 0);
gbe->frm_size_tile = val;
}
static void gbe_turn_on(void)
{
unsigned int val, i;
/*
* Check if pixel counter is off, for unknown reason this
* code hangs Visual Workstations
*/
if (gbe_revision < 2) {
val = gbe->vt_xy;
if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 0)
return;
}
/* turn on dot clock */
val = gbe->dotclock;
SET_GBE_FIELD(DOTCLK, RUN, val, 1);
gbe->dotclock = val;
udelay(10000);
for (i = 0; i < 10000; i++) {
val = gbe->dotclock;
if (GET_GBE_FIELD(DOTCLK, RUN, val) != 1)
udelay(10);
else
break;
}
if (i == 10000)
printk(KERN_ERR "gbefb: turn on dotclock timed out\n");
/* turn on pixel counter */
val = 0;
SET_GBE_FIELD(VT_XY, FREEZE, val, 0);
gbe->vt_xy = val;
udelay(10000);
for (i = 0; i < 10000; i++) {
val = gbe->vt_xy;
if (GET_GBE_FIELD(VT_XY, FREEZE, val))
udelay(10);
else
break;
}
if (i == 10000)
printk(KERN_ERR "gbefb: turn on pixel clock timed out\n");
/* turn on DMA */
val = gbe->frm_control;
SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 1);
gbe->frm_control = val;
udelay(1000);
for (i = 0; i < 10000; i++) {
val = gbe->frm_inhwctrl;
if (GET_GBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, val) != 1)
udelay(10);
else
break;
}
if (i == 10000)
printk(KERN_ERR "gbefb: turn on DMA timed out\n");
gbe_turned_on = 1;
}
static void gbe_loadcmap(void)
{
int i, j;
for (i = 0; i < 256; i++) {
for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
udelay(10);
if (j == 1000)
printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
gbe->cmap[i] = gbe_cmap[i];
}
}
/*
* Blank the display.
*/
static int gbefb_blank(int blank, struct fb_info *info)
{
/* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
switch (blank) {
case FB_BLANK_UNBLANK: /* unblank */
gbe_turn_on();
gbe_loadcmap();
break;
case FB_BLANK_NORMAL: /* blank */
gbe_turn_off();
break;
default:
/* Nothing */
break;
}
return 0;
}
/*
* Setup flatpanel related registers.
*/
static void gbefb_setup_flatpanel(struct gbe_timing_info *timing)
{
int fp_wid, fp_hgt, fp_vbs, fp_vbe;
u32 outputVal = 0;
SET_GBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal,
(timing->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
SET_GBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal,
(timing->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
gbe->vt_flags = outputVal;
/* Turn on the flat panel */
fp_wid = 1600;
fp_hgt = 1024;
fp_vbs = 0;
fp_vbe = 1600;
timing->pll_m = 4;
timing->pll_n = 1;
timing->pll_p = 0;
outputVal = 0;
SET_GBE_FIELD(FP_DE, ON, outputVal, fp_vbs);
SET_GBE_FIELD(FP_DE, OFF, outputVal, fp_vbe);
gbe->fp_de = outputVal;
outputVal = 0;
SET_GBE_FIELD(FP_HDRV, OFF, outputVal, fp_wid);
gbe->fp_hdrv = outputVal;
outputVal = 0;
SET_GBE_FIELD(FP_VDRV, ON, outputVal, 1);
SET_GBE_FIELD(FP_VDRV, OFF, outputVal, fp_hgt + 1);
gbe->fp_vdrv = outputVal;
}
struct gbe_pll_info {
int clock_rate;
int fvco_min;
int fvco_max;
};
static struct gbe_pll_info gbe_pll_table[2] = {
{ 20, 80, 220 },
{ 27, 80, 220 },
};
static int compute_gbe_timing(struct fb_var_screeninfo *var,
struct gbe_timing_info *timing)
{
int pll_m, pll_n, pll_p, error, best_m, best_n, best_p, best_error;
int pixclock;
struct gbe_pll_info *gbe_pll;
if (gbe_revision < 2)
gbe_pll = &gbe_pll_table[0];
else
gbe_pll = &gbe_pll_table[1];
/* Determine valid resolution and timing
* GBE crystal runs at 20Mhz or 27Mhz
* pll_m, pll_n, pll_p define the following frequencies
* fvco = pll_m * 20Mhz / pll_n
* fout = fvco / (2**pll_p) */
best_error = 1000000000;
best_n = best_m = best_p = 0;
for (pll_p = 0; pll_p < 4; pll_p++)
for (pll_m = 1; pll_m < 256; pll_m++)
for (pll_n = 1; pll_n < 64; pll_n++) {
pixclock = (1000000 / gbe_pll->clock_rate) *
(pll_n << pll_p) / pll_m;
error = var->pixclock - pixclock;
if (error < 0)
error = -error;
if (error < best_error &&
pll_m / pll_n >
gbe_pll->fvco_min / gbe_pll->clock_rate &&
pll_m / pll_n <
gbe_pll->fvco_max / gbe_pll->clock_rate) {
best_error = error;
best_m = pll_m;
best_n = pll_n;
best_p = pll_p;
}
}
if (!best_n || !best_m)
return -EINVAL; /* Resolution to high */
pixclock = (1000000 / gbe_pll->clock_rate) *
(best_n << best_p) / best_m;
/* set video timing information */
if (timing) {
timing->width = var->xres;
timing->height = var->yres;
timing->pll_m = best_m;
timing->pll_n = best_n;
timing->pll_p = best_p;
timing->cfreq = gbe_pll->clock_rate * 1000 * timing->pll_m /
(timing->pll_n << timing->pll_p);
timing->htotal = var->left_margin + var->xres +
var->right_margin + var->hsync_len;
timing->vtotal = var->upper_margin + var->yres +
var->lower_margin + var->vsync_len;
timing->fields_sec = 1000 * timing->cfreq / timing->htotal *
1000 / timing->vtotal;
timing->hblank_start = var->xres;
timing->vblank_start = var->yres;
timing->hblank_end = timing->htotal;
timing->hsync_start = var->xres + var->right_margin + 1;
timing->hsync_end = timing->hsync_start + var->hsync_len;
timing->vblank_end = timing->vtotal;
timing->vsync_start = var->yres + var->lower_margin + 1;
timing->vsync_end = timing->vsync_start + var->vsync_len;
}
return pixclock;
}
static void gbe_set_timing_info(struct gbe_timing_info *timing)
{
int temp;
unsigned int val;
/* setup dot clock PLL */
val = 0;
SET_GBE_FIELD(DOTCLK, M, val, timing->pll_m - 1);
SET_GBE_FIELD(DOTCLK, N, val, timing->pll_n - 1);
SET_GBE_FIELD(DOTCLK, P, val, timing->pll_p);
SET_GBE_FIELD(DOTCLK, RUN, val, 0); /* do not start yet */
gbe->dotclock = val;
udelay(10000);
/* setup pixel counter */
val = 0;
SET_GBE_FIELD(VT_XYMAX, MAXX, val, timing->htotal);
SET_GBE_FIELD(VT_XYMAX, MAXY, val, timing->vtotal);
gbe->vt_xymax = val;
/* setup video timing signals */
val = 0;
SET_GBE_FIELD(VT_VSYNC, VSYNC_ON, val, timing->vsync_start);
SET_GBE_FIELD(VT_VSYNC, VSYNC_OFF, val, timing->vsync_end);
gbe->vt_vsync = val;
val = 0;
SET_GBE_FIELD(VT_HSYNC, HSYNC_ON, val, timing->hsync_start);
SET_GBE_FIELD(VT_HSYNC, HSYNC_OFF, val, timing->hsync_end);
gbe->vt_hsync = val;
val = 0;
SET_GBE_FIELD(VT_VBLANK, VBLANK_ON, val, timing->vblank_start);
SET_GBE_FIELD(VT_VBLANK, VBLANK_OFF, val, timing->vblank_end);
gbe->vt_vblank = val;
val = 0;
SET_GBE_FIELD(VT_HBLANK, HBLANK_ON, val,
timing->hblank_start - 5);
SET_GBE_FIELD(VT_HBLANK, HBLANK_OFF, val,
timing->hblank_end - 3);
gbe->vt_hblank = val;
/* setup internal timing signals */
val = 0;
SET_GBE_FIELD(VT_VCMAP, VCMAP_ON, val, timing->vblank_start);
SET_GBE_FIELD(VT_VCMAP, VCMAP_OFF, val, timing->vblank_end);
gbe->vt_vcmap = val;
val = 0;
SET_GBE_FIELD(VT_HCMAP, HCMAP_ON, val, timing->hblank_start);
SET_GBE_FIELD(VT_HCMAP, HCMAP_OFF, val, timing->hblank_end);
gbe->vt_hcmap = val;
val = 0;
temp = timing->vblank_start - timing->vblank_end - 1;
if (temp > 0)
temp = -temp;
if (flat_panel_enabled)
gbefb_setup_flatpanel(timing);
SET_GBE_FIELD(DID_START_XY, DID_STARTY, val, (u32) temp);
if (timing->hblank_end >= 20)
SET_GBE_FIELD(DID_START_XY, DID_STARTX, val,
timing->hblank_end - 20);
else
SET_GBE_FIELD(DID_START_XY, DID_STARTX, val,
timing->htotal - (20 - timing->hblank_end));
gbe->did_start_xy = val;
val = 0;
SET_GBE_FIELD(CRS_START_XY, CRS_STARTY, val, (u32) (temp + 1));
if (timing->hblank_end >= GBE_CRS_MAGIC)
SET_GBE_FIELD(CRS_START_XY, CRS_STARTX, val,
timing->hblank_end - GBE_CRS_MAGIC);
else
SET_GBE_FIELD(CRS_START_XY, CRS_STARTX, val,
timing->htotal - (GBE_CRS_MAGIC -
timing->hblank_end));
gbe->crs_start_xy = val;
val = 0;
SET_GBE_FIELD(VC_START_XY, VC_STARTY, val, (u32) temp);
SET_GBE_FIELD(VC_START_XY, VC_STARTX, val, timing->hblank_end - 4);
gbe->vc_start_xy = val;
val = 0;
temp = timing->hblank_end - GBE_PIXEN_MAGIC_ON;
if (temp < 0)
temp += timing->htotal; /* allow blank to wrap around */
SET_GBE_FIELD(VT_HPIXEN, HPIXEN_ON, val, temp);
SET_GBE_FIELD(VT_HPIXEN, HPIXEN_OFF, val,
((temp + timing->width -
GBE_PIXEN_MAGIC_OFF) % timing->htotal));
gbe->vt_hpixen = val;
val = 0;
SET_GBE_FIELD(VT_VPIXEN, VPIXEN_ON, val, timing->vblank_end);
SET_GBE_FIELD(VT_VPIXEN, VPIXEN_OFF, val, timing->vblank_start);
gbe->vt_vpixen = val;
/* turn off sync on green */
val = 0;
SET_GBE_FIELD(VT_FLAGS, SYNC_LOW, val, 1);
gbe->vt_flags = val;
}
/*
* Set the hardware according to 'par'.
*/
static int gbefb_set_par(struct fb_info *info)
{
int i;
unsigned int val;
int wholeTilesX, partTilesX, maxPixelsPerTileX;
int height_pix;
int xpmax, ypmax; /* Monitor resolution */
int bytesPerPixel; /* Bytes per pixel */
struct gbefb_par *par = (struct gbefb_par *) info->par;
compute_gbe_timing(&info->var, &par->timing);
bytesPerPixel = info->var.bits_per_pixel / 8;
info->fix.line_length = info->var.xres_virtual * bytesPerPixel;
xpmax = par->timing.width;
ypmax = par->timing.height;
/* turn off GBE */
gbe_turn_off();
/* set timing info */
gbe_set_timing_info(&par->timing);
/* initialize DIDs */
val = 0;
switch (bytesPerPixel) {
case 1:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8);
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
case 2:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5);
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 4:
SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8);
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
}
SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH);
for (i = 0; i < 32; i++)
gbe->mode_regs[i] = val;
/* Initialize interrupts */
gbe->vt_intr01 = 0xffffffff;
gbe->vt_intr23 = 0xffffffff;
/* HACK:
The GBE hardware uses a tiled memory to screen mapping. Tiles are
blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit,
16bit and 32 bit modes (64 kB). They cover the screen with partial
tiles on the right and/or bottom of the screen if needed.
For example in 640x480 8 bit mode the mapping is:
<-------- 640 ----->
<---- 512 ----><128|384 offscreen>
^ ^
| 128 [tile 0] [tile 1]
| v
^
4 128 [tile 2] [tile 3]
8 v
0 ^
128 [tile 4] [tile 5]
| v
| ^
v 96 [tile 6] [tile 7]
32 offscreen
Tiles have the advantage that they can be allocated individually in
memory. However, this mapping is not linear at all, which is not
really convenient. In order to support linear addressing, the GBE
DMA hardware is fooled into thinking the screen is only one tile
large and but has a greater height, so that the DMA transfer covers
the same region.
Tiles are still allocated as independent chunks of 64KB of
continuous physical memory and remapped so that the kernel sees the
framebuffer as a continuous virtual memory. The GBE tile table is
set up so that each tile references one of these 64k blocks:
GBE -> tile list framebuffer TLB <------------ CPU
[ tile 0 ] -> [ 64KB ] <- [ 16x 4KB page entries ] ^
... ... ... linear virtual FB
[ tile n ] -> [ 64KB ] <- [ 16x 4KB page entries ] v
The GBE hardware is then told that the buffer is 512*tweaked_height,
with tweaked_height = real_width*real_height/pixels_per_tile.
Thus the GBE hardware will scan the first tile, filing the first 64k
covered region of the screen, and then will proceed to the next
tile, until the whole screen is covered.
Here is what would happen at 640x480 8bit:
normal tiling linear
^ 11111111111111112222 11111111111111111111 ^
128 11111111111111112222 11111111111111111111 102 lines
11111111111111112222 11111111111111111111 v
V 11111111111111112222 11111111222222222222
33333333333333334444 22222222222222222222
33333333333333334444 22222222222222222222
< 512 > < 256 > 102*640+256 = 64k
NOTE: The only mode for which this is not working is 800x600 8bit,
as 800*600/512 = 937.5 which is not integer and thus causes
flickering.
I guess this is not so important as one can use 640x480 8bit or
800x600 16bit anyway.
*/
/* Tell gbe about the tiles table location */
/* tile_ptr -> [ tile 1 ] -> FB mem */
/* [ tile 2 ] -> FB mem */
/* ... */
val = 0;
SET_GBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, val, gbe_tiles.dma >> 9);
SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 0); /* do not start */
SET_GBE_FIELD(FRM_CONTROL, FRM_LINEAR, val, 0);
gbe->frm_control = val;
maxPixelsPerTileX = 512 / bytesPerPixel;
wholeTilesX = 1;
partTilesX = 0;
/* Initialize the framebuffer */
val = 0;
SET_GBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, val, wholeTilesX);
SET_GBE_FIELD(FRM_SIZE_TILE, FRM_RHS, val, partTilesX);
switch (bytesPerPixel) {
case 1:
SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
GBE_FRM_DEPTH_8);
break;
case 2:
SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
GBE_FRM_DEPTH_16);
break;
case 4:
SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
GBE_FRM_DEPTH_32);
break;
}
gbe->frm_size_tile = val;
/* compute tweaked height */
height_pix = xpmax * ypmax / maxPixelsPerTileX;
val = 0;
SET_GBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, val, height_pix);
gbe->frm_size_pixel = val;
/* turn off DID and overlay DMA */
gbe->did_control = 0;
gbe->ovr_width_tile = 0;
/* Turn off mouse cursor */
gbe->crs_ctl = 0;
/* Turn on GBE */
gbe_turn_on();
/* Initialize the gamma map */
udelay(10);
for (i = 0; i < 256; i++)
gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8);
/* Initialize the color map */
for (i = 0; i < 256; i++)
gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24);
gbe_loadcmap();
return 0;
}
static void gbefb_encode_fix(struct fb_fix_screeninfo *fix,
struct fb_var_screeninfo *var)
{
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
strcpy(fix->id, "SGI GBE");
fix->smem_start = (unsigned long) gbe_mem;
fix->smem_len = gbe_mem_size;
fix->type = FB_TYPE_PACKED_PIXELS;
fix->type_aux = 0;
fix->accel = FB_ACCEL_NONE;
switch (var->bits_per_pixel) {
case 8:
fix->visual = FB_VISUAL_PSEUDOCOLOR;
break;
default:
fix->visual = FB_VISUAL_TRUECOLOR;
break;
}
fix->ywrapstep = 0;
fix->xpanstep = 0;
fix->ypanstep = 0;
fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
fix->mmio_start = GBE_BASE;
fix->mmio_len = sizeof(struct sgi_gbe);
}
/*
* Set a single color register. The values supplied are already
* rounded down to the hardware's capabilities (according to the
* entries in the var structure). Return != 0 for invalid regno.
*/
static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
{
int i;
if (regno > 255)
return 1;
red >>= 8;
green >>= 8;
blue >>= 8;
if (info->var.bits_per_pixel <= 8) {
gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
if (gbe_turned_on) {
/* wait for the color map FIFO to have a free entry */
for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
udelay(10);
if (i == 1000) {
printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
return 1;
}
gbe->cmap[regno] = gbe_cmap[regno];
}
} else if (regno < 16) {
switch (info->var.bits_per_pixel) {
case 15:
case 16:
red >>= 3;
green >>= 3;
blue >>= 3;
pseudo_palette[regno] =
(red << info->var.red.offset) |
(green << info->var.green.offset) |
(blue << info->var.blue.offset);
break;
case 32:
pseudo_palette[regno] =
(red << info->var.red.offset) |
(green << info->var.green.offset) |
(blue << info->var.blue.offset);
break;
}
}
return 0;
}
/*
* Check video mode validity, eventually modify var to best match.
*/
static int gbefb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
unsigned int line_length;
struct gbe_timing_info timing;
int ret;
/* Limit bpp to 8, 16, and 32 */
if (var->bits_per_pixel <= 8)
var->bits_per_pixel = 8;
else if (var->bits_per_pixel <= 16)
var->bits_per_pixel = 16;
else if (var->bits_per_pixel <= 32)
var->bits_per_pixel = 32;
else
return -EINVAL;
/* Check the mode can be mapped linearly with the tile table trick. */
/* This requires width x height x bytes/pixel be a multiple of 512 */
if ((var->xres * var->yres * var->bits_per_pixel) & 4095)
return -EINVAL;
var->grayscale = 0; /* No grayscale for now */
ret = compute_gbe_timing(var, &timing);
var->pixclock = ret;
if (ret < 0)
return -EINVAL;
/* Adjust virtual resolution, if necessary */
if (var->xres > var->xres_virtual || (!ywrap && !ypan))
var->xres_virtual = var->xres;
if (var->yres > var->yres_virtual || (!ywrap && !ypan))
var->yres_virtual = var->yres;
if (var->vmode & FB_VMODE_CONUPDATE) {
var->vmode |= FB_VMODE_YWRAP;
var->xoffset = info->var.xoffset;
var->yoffset = info->var.yoffset;
}
/* No grayscale for now */
var->grayscale = 0;
/* Memory limit */
line_length = var->xres_virtual * var->bits_per_pixel / 8;
if (line_length * var->yres_virtual > gbe_mem_size)
return -ENOMEM; /* Virtual resolution too high */
switch (var->bits_per_pixel) {
case 8:
var->red.offset = 0;
var->red.length = 8;
var->green.offset = 0;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
var->transp.offset = 0;
var->transp.length = 0;
break;
case 16: /* RGB 1555 */
var->red.offset = 10;
var->red.length = 5;
var->green.offset = 5;
var->green.length = 5;
var->blue.offset = 0;
var->blue.length = 5;
var->transp.offset = 0;
var->transp.length = 0;
break;
case 32: /* RGB 8888 */
var->red.offset = 24;
var->red.length = 8;
var->green.offset = 16;
var->green.length = 8;
var->blue.offset = 8;
var->blue.length = 8;
var->transp.offset = 0;
var->transp.length = 8;
break;
}
var->red.msb_right = 0;
var->green.msb_right = 0;
var->blue.msb_right = 0;
var->transp.msb_right = 0;
var->left_margin = timing.htotal - timing.hsync_end;
var->right_margin = timing.hsync_start - timing.width;
var->upper_margin = timing.vtotal - timing.vsync_end;
var->lower_margin = timing.vsync_start - timing.height;
var->hsync_len = timing.hsync_end - timing.hsync_start;
var->vsync_len = timing.vsync_end - timing.vsync_start;
return 0;
}
static int gbefb_mmap(struct fb_info *info,
struct vm_area_struct *vma)
{
unsigned long size = vma->vm_end - vma->vm_start;
unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
unsigned long addr;
unsigned long phys_addr, phys_size;
u16 *tile;
/* check range */
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
return -EINVAL;
if (offset + size > gbe_mem_size)
return -EINVAL;
/* remap using the fastest write-through mode on architecture */
/* try not polluting the cache when possible */
pgprot_val(vma->vm_page_prot) =
pgprot_fb(pgprot_val(vma->vm_page_prot));
vma->vm_flags |= VM_IO | VM_RESERVED;
/* look for the starting tile */
tile = &gbe_tiles.cpu[offset >> TILE_SHIFT];
addr = vma->vm_start;
offset &= TILE_MASK;
/* remap each tile separately */
do {
phys_addr = (((unsigned long) (*tile)) << TILE_SHIFT) + offset;
if ((offset + size) < TILE_SIZE)
phys_size = size;
else
phys_size = TILE_SIZE - offset;
if (remap_pfn_range(vma, addr, phys_addr >> PAGE_SHIFT,
phys_size, vma->vm_page_prot))
return -EAGAIN;
offset = 0;
size -= phys_size;
addr += phys_size;
tile++;
} while (size);
return 0;
}
static struct fb_ops gbefb_ops = {
.owner = THIS_MODULE,
.fb_check_var = gbefb_check_var,
.fb_set_par = gbefb_set_par,
.fb_setcolreg = gbefb_setcolreg,
.fb_mmap = gbefb_mmap,
.fb_blank = gbefb_blank,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
};
/*
* sysfs
*/
static ssize_t gbefb_show_memsize(struct device *dev, struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n", gbe_mem_size);
}
static DEVICE_ATTR(size, S_IRUGO, gbefb_show_memsize, NULL);
static ssize_t gbefb_show_rev(struct device *device, struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n", gbe_revision);
}
static DEVICE_ATTR(revision, S_IRUGO, gbefb_show_rev, NULL);
static void __devexit gbefb_remove_sysfs(struct device *dev)
{
device_remove_file(dev, &dev_attr_size);
device_remove_file(dev, &dev_attr_revision);
}
static void gbefb_create_sysfs(struct device *dev)
{
device_create_file(dev, &dev_attr_size);
device_create_file(dev, &dev_attr_revision);
}
/*
* Initialization
*/
VIDEO. gbefb: Fix section mismatches. WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26 22:08:13 +04:00
static int __devinit gbefb_setup(char *options)
{
char *this_opt;
if (!options || !*options)
return 0;
while ((this_opt = strsep(&options, ",")) != NULL) {
if (!strncmp(this_opt, "monitor:", 8)) {
if (!strncmp(this_opt + 8, "crt", 3)) {
flat_panel_enabled = 0;
default_var = &default_var_CRT;
default_mode = &default_mode_CRT;
} else if (!strncmp(this_opt + 8, "1600sw", 6) ||
!strncmp(this_opt + 8, "lcd", 3)) {
flat_panel_enabled = 1;
default_var = &default_var_LCD;
default_mode = &default_mode_LCD;
}
} else if (!strncmp(this_opt, "mem:", 4)) {
gbe_mem_size = memparse(this_opt + 4, &this_opt);
if (gbe_mem_size > CONFIG_FB_GBE_MEM * 1024 * 1024)
gbe_mem_size = CONFIG_FB_GBE_MEM * 1024 * 1024;
if (gbe_mem_size < TILE_SIZE)
gbe_mem_size = TILE_SIZE;
} else
mode_option = this_opt;
}
return 0;
}
platform-drivers: move probe to .devinit.text in drivers/video A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Adrian Bunk <bunk@stusta.de> Cc: Alberto Mardegan <mardy@users.sourceforge.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andriy Skulysh <askulysh@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Chandramouli Narayanan <mouli@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Frans Pop <elendil@planet.nl> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: Huang Ying <ying.huang@intel.com> Cc: Ian Molton <spyro@f2s.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Kaj-Michael Lang <milang@tal.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Magnus Damm <damm@igel.co.jp> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Matthias Kaehlcke <matthias@kaehlcke.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Pavel Machek <pavel@suse.cz> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Roland Stigge <stigge@antcom.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vincent Sanders <vince@simtec.co.uk> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: James Simmons <jsimmons@infradead.org> Acked-by: Peter Jones <pjones@redhat.com> Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-04 22:56:51 +03:00
static int __devinit gbefb_probe(struct platform_device *p_dev)
{
int i, ret = 0;
struct fb_info *info;
struct gbefb_par *par;
#ifndef MODULE
char *options = NULL;
#endif
info = framebuffer_alloc(sizeof(struct gbefb_par), &p_dev->dev);
if (!info)
return -ENOMEM;
#ifndef MODULE
if (fb_get_options("gbefb", &options)) {
ret = -ENODEV;
goto out_release_framebuffer;
}
gbefb_setup(options);
#endif
if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
printk(KERN_ERR "gbefb: couldn't reserve mmio region\n");
ret = -EBUSY;
goto out_release_framebuffer;
}
gbe = (struct sgi_gbe *) ioremap(GBE_BASE, sizeof(struct sgi_gbe));
if (!gbe) {
printk(KERN_ERR "gbefb: couldn't map mmio region\n");
ret = -ENXIO;
goto out_release_mem_region;
}
gbe_revision = gbe->ctrlstat & 15;
gbe_tiles.cpu =
dma_alloc_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
&gbe_tiles.dma, GFP_KERNEL);
if (!gbe_tiles.cpu) {
printk(KERN_ERR "gbefb: couldn't allocate tiles table\n");
ret = -ENOMEM;
goto out_unmap;
}
if (gbe_mem_phys) {
/* memory was allocated at boot time */
gbe_mem = ioremap_nocache(gbe_mem_phys, gbe_mem_size);
if (!gbe_mem) {
printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
ret = -ENOMEM;
goto out_tiles_free;
}
gbe_dma_addr = 0;
} else {
/* try to allocate memory with the classical allocator
* this has high chance to fail on low memory machines */
gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr,
GFP_KERNEL);
if (!gbe_mem) {
printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n");
ret = -ENOMEM;
goto out_tiles_free;
}
gbe_mem_phys = (unsigned long) gbe_dma_addr;
}
#ifdef CONFIG_X86
mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1);
#endif
/* map framebuffer memory into tiles table */
for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++)
gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i;
info->fbops = &gbefb_ops;
info->pseudo_palette = pseudo_palette;
info->flags = FBINFO_DEFAULT;
info->screen_base = gbe_mem;
fb_alloc_cmap(&info->cmap, 256, 0);
/* reset GBE */
gbe_reset();
par = info->par;
/* turn on default video mode */
if (fb_find_mode(&par->var, info, mode_option, NULL, 0,
default_mode, 8) == 0)
par->var = *default_var;
info->var = par->var;
gbefb_check_var(&par->var, info);
gbefb_encode_fix(&info->fix, &info->var);
if (register_framebuffer(info) < 0) {
printk(KERN_ERR "gbefb: couldn't register framebuffer\n");
ret = -ENXIO;
goto out_gbe_unmap;
}
platform_set_drvdata(p_dev, info);
gbefb_create_sysfs(&p_dev->dev);
printk(KERN_INFO "fb%d: %s rev %d @ 0x%08x using %dkB memory\n",
info->node, info->fix.id, gbe_revision, (unsigned) GBE_BASE,
gbe_mem_size >> 10);
return 0;
out_gbe_unmap:
if (gbe_dma_addr)
dma_free_coherent(NULL, gbe_mem_size, gbe_mem, gbe_mem_phys);
else
iounmap(gbe_mem);
out_tiles_free:
dma_free_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
(void *)gbe_tiles.cpu, gbe_tiles.dma);
out_unmap:
iounmap(gbe);
out_release_mem_region:
release_mem_region(GBE_BASE, sizeof(struct sgi_gbe));
out_release_framebuffer:
framebuffer_release(info);
return ret;
}
static int __devexit gbefb_remove(struct platform_device* p_dev)
{
struct fb_info *info = platform_get_drvdata(p_dev);
unregister_framebuffer(info);
gbe_turn_off();
if (gbe_dma_addr)
dma_free_coherent(NULL, gbe_mem_size, gbe_mem, gbe_mem_phys);
else
iounmap(gbe_mem);
dma_free_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
(void *)gbe_tiles.cpu, gbe_tiles.dma);
release_mem_region(GBE_BASE, sizeof(struct sgi_gbe));
iounmap(gbe);
gbefb_remove_sysfs(&p_dev->dev);
framebuffer_release(info);
return 0;
}
static struct platform_driver gbefb_driver = {
.probe = gbefb_probe,
.remove = __devexit_p(gbefb_remove),
.driver = {
.name = "gbefb",
},
};
static struct platform_device *gbefb_device;
static int __init gbefb_init(void)
{
int ret = platform_driver_register(&gbefb_driver);
if (!ret) {
gbefb_device = platform_device_alloc("gbefb", 0);
if (gbefb_device) {
ret = platform_device_add(gbefb_device);
} else {
ret = -ENOMEM;
}
if (ret) {
platform_device_put(gbefb_device);
platform_driver_unregister(&gbefb_driver);
}
}
return ret;
}
static void __exit gbefb_exit(void)
{
platform_device_unregister(gbefb_device);
platform_driver_unregister(&gbefb_driver);
}
module_init(gbefb_init);
module_exit(gbefb_exit);
MODULE_LICENSE("GPL");