WSL2-Linux-Kernel/fs/overlayfs/ovl_entry.h

120 строки
2.7 KiB
C
Исходник Обычный вид История

/* SPDX-License-Identifier: GPL-2.0-only */
/*
*
* Copyright (C) 2011 Novell Inc.
* Copyright (C) 2016 Red Hat, Inc.
*/
struct ovl_config {
char *lowerdir;
char *upperdir;
char *workdir;
bool default_permissions;
bool redirect_dir;
bool redirect_follow;
const char *redirect_mode;
bool index;
bool nfs_export;
ovl: add support for "xino" mount and config options With mount option "xino=on", mounter declares that there are enough free high bits in underlying fs to hold the layer fsid. If overlayfs does encounter underlying inodes using the high xino bits reserved for layer fsid, a warning will be emitted and the original inode number will be used. The mount option name "xino" goes after a similar meaning mount option of aufs, but in overlayfs case, the mapping is stateless. An example for a use case of "xino=on" is when upper/lower is on an xfs filesystem. xfs uses 64bit inode numbers, but it currently never uses the upper 8bit for inode numbers exposed via stat(2) and that is not likely to change in the future without user opting-in for a new xfs feature. The actual number of unused upper bit is much larger and determined by the xfs filesystem geometry (64 - agno_log - agblklog - inopblog). That means that for all practical purpose, there are enough unused bits in xfs inode numbers for more than OVL_MAX_STACK unique fsid's. Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode numbers are allocated sequentially since boot, so they will practially never use the high inode number bits. For compatibility with applications that expect 32bit inodes, the feature can be disabled with "xino=off". The option "xino=auto" automatically detects underlying filesystem that use 32bit inodes and enables the feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of the same name, determine if the default mode for overlayfs mount is "xino=auto" or "xino=off". Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-29 09:08:18 +03:00
int xino;
bool metacopy;
};
struct ovl_sb {
struct super_block *sb;
dev_t pseudo_dev;
};
struct ovl_layer {
struct vfsmount *mnt;
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 17:42:08 +03:00
/* Trap in ovl inode cache */
struct inode *trap;
struct ovl_sb *fs;
/* Index of this layer in fs root (upper idx == 0) */
int idx;
/* One fsid per unique underlying sb (upper fsid == 0) */
int fsid;
};
struct ovl_path {
struct ovl_layer *layer;
struct dentry *dentry;
};
/* private information held for overlayfs's superblock */
struct ovl_fs {
struct vfsmount *upper_mnt;
unsigned int numlower;
/* Number of unique lower sb that differ from upper sb */
unsigned int numlowerfs;
struct ovl_layer *lower_layers;
struct ovl_sb *lower_fs;
/* workbasedir is the path at workdir= mount option */
struct dentry *workbasedir;
/* workdir is the 'work' directory under workbasedir */
struct dentry *workdir;
/* index directory listing overlay inodes by origin file handle */
struct dentry *indexdir;
long namelen;
/* pathnames of lower and upper dirs, for show_options */
struct ovl_config config;
/* creds of process who forced instantiation of super block */
const struct cred *creator_cred;
bool tmpfile;
bool noxattr;
/* Did we take the inuse lock? */
bool upperdir_locked;
bool workdir_locked;
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 17:42:08 +03:00
/* Traps in ovl inode cache */
struct inode *upperdir_trap;
ovl: fix regression caused by overlapping layers detection Once upon a time, commit 2cac0c00a6cd ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1eef1a ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Tested-by: Colin Walters <walters@verbum.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-07-12 15:24:34 +03:00
struct inode *workbasedir_trap;
ovl: detect overlapping layers Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-04-18 17:42:08 +03:00
struct inode *workdir_trap;
struct inode *indexdir_trap;
/* Inode numbers in all layers do not use the high xino_bits */
unsigned int xino_bits;
};
/* private information held for every overlayfs dentry */
struct ovl_entry {
union {
struct {
unsigned long flags;
};
struct rcu_head rcu;
};
unsigned numlower;
struct ovl_path lowerstack[];
};
struct ovl_entry *ovl_alloc_entry(unsigned int numlower);
static inline struct ovl_entry *OVL_E(struct dentry *dentry)
{
return (struct ovl_entry *) dentry->d_fsdata;
}
struct ovl_inode {
union {
struct ovl_dir_cache *cache; /* directory */
struct inode *lowerdata; /* regular file */
};
const char *redirect;
u64 version;
unsigned long flags;
struct inode vfs_inode;
struct dentry *__upperdentry;
struct inode *lower;
/* synchronize copy up and more */
struct mutex lock;
};
static inline struct ovl_inode *OVL_I(struct inode *inode)
{
return container_of(inode, struct ovl_inode, vfs_inode);
}
static inline struct dentry *ovl_upperdentry_dereference(struct ovl_inode *oi)
{
return READ_ONCE(oi->__upperdentry);
}