microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/bluetooth/btintel.h

169 строки
4.1 KiB
C
Исходник Обычный вид История

Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 10:52:11 +03:00
/*
*
* Bluetooth support for Intel devices
*
* Copyright (C) 2015 Intel Corporation
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
Bluetooth: btusb: Move Intel command structs into its own header Since the Intel Bluetooth support has its own header, it makes sense to move all command structs into it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 10:52:13 +03:00
struct intel_version {
u8 status;
u8 hw_platform;
u8 hw_variant;
u8 hw_revision;
u8 fw_variant;
u8 fw_revision;
u8 fw_build_num;
u8 fw_build_ww;
u8 fw_build_yy;
u8 fw_patch_num;
} __packed;
struct intel_boot_params {
__u8 status;
__u8 otp_format;
__u8 otp_content;
__u8 otp_patch;
__le16 dev_revid;
__u8 secure_boot;
__u8 key_from_hdr;
__u8 key_type;
__u8 otp_lock;
__u8 api_lock;
__u8 debug_lock;
bdaddr_t otp_bdaddr;
__u8 min_fw_build_nn;
__u8 min_fw_build_cw;
__u8 min_fw_build_yy;
__u8 limited_cce;
__u8 unlocked_state;
} __packed;
Bluetooth: btusb: Use proper data structures for Intel vendor events The Intel vendors events indicating firmware loading result and the bootup of the operational firmware are currently hardcoded byte comparisons. So intead of doing that, provide proper data structures and actually use them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-09 10:35:19 +03:00
struct intel_bootup {
__u8 zero;
__u8 num_cmds;
__u8 source;
__u8 reset_type;
__u8 reset_reason;
__u8 ddc_status;
} __packed;
struct intel_secure_send_result {
__u8 result;
__le16 opcode;
__u8 status;
} __packed;
Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 10:52:11 +03:00
#if IS_ENABLED(CONFIG_BT_INTEL)
int btintel_check_bdaddr(struct hci_dev *hdev);
Bluetooth: btintel: Add manufacturing enter/exit helpers Older Intel controllers need to enter manufacturing mode to perform some vendor specific operations (patching, configuration...). Add enter/exit manufaturing methods and refactor existing manufacturing code. Exit can be configured to perform a reset. Reset can be performed either with patches activated or deactivated. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-03 18:10:22 +03:00
int btintel_enter_mfg(struct hci_dev *hdev);
int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched);
Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 10:52:11 +03:00
int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
Bluetooth: btintel: Add support for enabling tracing functionality For Intel controllers with firmware that allows tracing of baseband functionality this allows enabling it via set_diag driver callback. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-09 15:42:08 +03:00
int btintel_set_diag(struct hci_dev *hdev, bool enable);
Bluetooth: btintel: Add diagnostic support for older controllers For the older controllers like Wilkens Peak and Stone Peak, enabling the traces requires to switch into manufacturer mode first. This patch does exactly that, but only for these older controllers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-17 17:00:28 +03:00
int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable);
Bluetooth: btintel: Add generic function for handling hardware errors The handling of hardware error has support for providing a vendor specific callback to deal with the error. Move the Intel specific function out of the USB driver into the generic module so that it can also be utilized by the UART driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-05 15:37:38 +03:00
void btintel_hw_error(struct hci_dev *hdev, u8 code);
Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 10:52:11 +03:00
Bluetooth: btintel: Create common function for Intel version info The Intel version information is shared between USB and UART drivers and with that move it into a generic function of the Intel module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-05 16:02:07 +03:00
void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
Bluetooth: btintel: Create common Intel Secure Send function The Intel Secure Send command is used the same in USB and UART drivers and with that move a generic version into the Intel module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-05 15:55:36 +03:00
int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
const void *param);
Bluetooth: btintel: Add Device Configuration support btintel_load_ddc_config retrieves the ddc file and sends its content via DDC commands (opcode 0xfc8b). The ddc file should contain one or more DDC structures. A DDC structure is composed of the folowing fields: field: | DDC LEN | DDC ID | DDC VALUE | size: | 1 byte | 2 bytes | DDC LEN - 2 | Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-04 18:54:34 +03:00
int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name);
Bluetooth: btintel: Enable extra Intel vendor events The Intel Bluetooth controllers can emit extra vendor specific events in error conditions or for debugging purposes. To make the life easier for engineers, enable them by default. When the vendor_diag options has been enabled, then additional debug events are also enabled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 03:45:19 +03:00
int btintel_set_event_mask(struct hci_dev *hdev, bool debug);
int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug);
Bluetooth: btintel: Create common Intel Version Read function The Intel Version Read command is used to retrieve information about hardware and firmware version/revision of Intel Bluetooth controllers. This is an Intel generic command used in USB and UART drivers. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-06 18:18:34 +03:00
int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver);
Bluetooth: btintel: Create common Intel Secure Send function The Intel Secure Send command is used the same in USB and UART drivers and with that move a generic version into the Intel module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-05 15:55:36 +03:00
Bluetooth: btintel: Add iBT register access over HCI support Add regmap ibt to support Intel Bluetooth silicon register access over HCI. Intel BT/FM combo chip allows to read/write some registers (e.g. FM registers) via its HCI interface. Read/Write operations are performed via a HCI transaction composed of a HCI command (host->controller) followed by a HCI command complete event (controller->host). Read/Write Command opcodes can be specified to the regmap init function. We define data formats which are intel/vendor specific. Register Read/Write HCI command payload (Host): Field: | REG ADDR | MODE | DATA_LEN | DATA... | size: | 32b | 8b | 8b | 8b* | Register Read HCI command complete event payload (Controller): Field: | CMD STATUS | REG ADDR | DATA... | size: | 8b | 32b | 8b* | Register Write HCI command complete event payload (Controller): Field: | CMD_STATUS | size: | 8b | Since this payload is HCI encapsulated, Little Endian byte order is used. Write/Read Example: If we write 0x0000002a at address 0x00008c04, with opcode_write 0xfc5d, The resulting transaction is (btmon trace): < HCI Command (0x3f|0x005d) plen 10 [hci0] 04 8c 00 00 02 04 2a 00 00 00 > HCI Event (0x0e) plen 4 Unknown (0x3f|0x005d) ncmd 1 00 Then, if we read the same register with opcode_read 0xfc5e: < HCI Command (0x3f|0x005e) plen 6 [hci0] 04 8c 00 00 02 04 > HCI Event (0x0e) plen 12 [hci0] Unknown (0x3f|0x005e) ncmd 1 00 04 8c 00 00 2a 00 00 00 Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 19:16:21 +03:00
struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
u16 opcode_write);
Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 10:52:11 +03:00
#else
static inline int btintel_check_bdaddr(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Add manufacturing enter/exit helpers Older Intel controllers need to enter manufacturing mode to perform some vendor specific operations (patching, configuration...). Add enter/exit manufaturing methods and refactor existing manufacturing code. Exit can be configured to perform a reset. Reset can be performed either with patches activated or deactivated. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-03 18:10:22 +03:00
static inline int btintel_enter_mfg(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
}
static inline int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 10:52:11 +03:00
static inline int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Add support for enabling tracing functionality For Intel controllers with firmware that allows tracing of baseband functionality this allows enabling it via set_diag driver callback. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-09 15:42:08 +03:00
static inline int btintel_set_diag(struct hci_dev *hdev, bool enable)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Add diagnostic support for older controllers For the older controllers like Wilkens Peak and Stone Peak, enabling the traces requires to switch into manufacturer mode first. This patch does exactly that, but only for these older controllers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-17 17:00:28 +03:00
static inline int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Add generic function for handling hardware errors The handling of hardware error has support for providing a vendor specific callback to deal with the error. Move the Intel specific function out of the USB driver into the generic module so that it can also be utilized by the UART driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-05 15:37:38 +03:00
static inline void btintel_hw_error(struct hci_dev *hdev, u8 code)
{
}
Bluetooth: btintel: fix warning Fix compilation the following compilation warning, which happens when CONFIG_BT_INTEL is not set: drivers/bluetooth/btintel.h:98:13: warning: ‘btintel_version_info’ defined but not used [-Wunused-function] static void btintel_version_info(struct hci_dev *hdev, struct intel_version *ver) ^ Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-04 00:08:45 +03:00
static inline void btintel_version_info(struct hci_dev *hdev,
struct intel_version *ver)
Bluetooth: btintel: Create common function for Intel version info The Intel version information is shared between USB and UART drivers and with that move it into a generic function of the Intel module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-05 16:02:07 +03:00
{
}
Bluetooth: btintel: Create common Intel Secure Send function The Intel Secure Send command is used the same in USB and UART drivers and with that move a generic version into the Intel module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-07-05 15:55:36 +03:00
static inline int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type,
u32 plen, const void *param)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Add Device Configuration support btintel_load_ddc_config retrieves the ddc file and sends its content via DDC commands (opcode 0xfc8b). The ddc file should contain one or more DDC structures. A DDC structure is composed of the folowing fields: field: | DDC LEN | DDC ID | DDC VALUE | size: | 1 byte | 2 bytes | DDC LEN - 2 | Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-04 18:54:34 +03:00
static inline int btintel_load_ddc_config(struct hci_dev *hdev,
const char *ddc_name)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Enable extra Intel vendor events The Intel Bluetooth controllers can emit extra vendor specific events in error conditions or for debugging purposes. To make the life easier for engineers, enable them by default. When the vendor_diag options has been enabled, then additional debug events are also enabled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-21 03:45:19 +03:00
static inline int btintel_set_event_mask(struct hci_dev *hdev, bool debug)
{
return -EOPNOTSUPP;
}
static inline int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Create common Intel Version Read function The Intel Version Read command is used to retrieve information about hardware and firmware version/revision of Intel Bluetooth controllers. This is an Intel generic command used in USB and UART drivers. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-06 18:18:34 +03:00
static inline int btintel_read_version(struct hci_dev *hdev,
struct intel_version *ver)
{
return -EOPNOTSUPP;
}
Bluetooth: btintel: Add iBT register access over HCI support Add regmap ibt to support Intel Bluetooth silicon register access over HCI. Intel BT/FM combo chip allows to read/write some registers (e.g. FM registers) via its HCI interface. Read/Write operations are performed via a HCI transaction composed of a HCI command (host->controller) followed by a HCI command complete event (controller->host). Read/Write Command opcodes can be specified to the regmap init function. We define data formats which are intel/vendor specific. Register Read/Write HCI command payload (Host): Field: | REG ADDR | MODE | DATA_LEN | DATA... | size: | 32b | 8b | 8b | 8b* | Register Read HCI command complete event payload (Controller): Field: | CMD STATUS | REG ADDR | DATA... | size: | 8b | 32b | 8b* | Register Write HCI command complete event payload (Controller): Field: | CMD_STATUS | size: | 8b | Since this payload is HCI encapsulated, Little Endian byte order is used. Write/Read Example: If we write 0x0000002a at address 0x00008c04, with opcode_write 0xfc5d, The resulting transaction is (btmon trace): < HCI Command (0x3f|0x005d) plen 10 [hci0] 04 8c 00 00 02 04 2a 00 00 00 > HCI Event (0x0e) plen 4 Unknown (0x3f|0x005d) ncmd 1 00 Then, if we read the same register with opcode_read 0xfc5e: < HCI Command (0x3f|0x005e) plen 6 [hci0] 04 8c 00 00 02 04 > HCI Event (0x0e) plen 12 [hci0] Unknown (0x3f|0x005e) ncmd 1 00 04 8c 00 00 2a 00 00 00 Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01 19:16:21 +03:00
static inline struct regmap *btintel_regmap_init(struct hci_dev *hdev,
u16 opcode_read,
u16 opcode_write)
{
return ERR_PTR(-EINVAL);
}
Bluetooth: btintel: Introduce generic Intel Bluetooth support The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 10:52:11 +03:00
#endif