WSL2-Linux-Kernel/net/dccp/ipv4.c

1096 строки
28 KiB
C
Исходник Обычный вид История

/*
* net/dccp/ipv4.c
*
* An implementation of the DCCP protocol
* Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/dccp.h>
#include <linux/icmp.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/random.h>
#include <net/icmp.h>
#include <net/inet_common.h>
#include <net/inet_hashtables.h>
#include <net/inet_sock.h>
#include <net/protocol.h>
#include <net/sock.h>
#include <net/timewait_sock.h>
#include <net/tcp_states.h>
#include <net/xfrm.h>
#include <net/secure_seq.h>
#include "ackvec.h"
#include "ccid.h"
#include "dccp.h"
#include "feat.h"
/*
* The per-net dccp.v4_ctl_sk socket is used for responding to
* the Out-of-the-blue (OOTB) packets. A control sock will be created
* for this socket at the initialization time.
*/
int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
const struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
struct inet_sock *inet = inet_sk(sk);
struct dccp_sock *dp = dccp_sk(sk);
__be16 orig_sport, orig_dport;
__be32 daddr, nexthop;
struct flowi4 *fl4;
struct rtable *rt;
int err;
struct ip_options_rcu *inet_opt;
dp->dccps_role = DCCP_ROLE_CLIENT;
if (addr_len < sizeof(struct sockaddr_in))
return -EINVAL;
if (usin->sin_family != AF_INET)
return -EAFNOSUPPORT;
nexthop = daddr = usin->sin_addr.s_addr;
inet_opt = rcu_dereference_protected(inet->inet_opt,
sock_owned_by_user(sk));
if (inet_opt != NULL && inet_opt->opt.srr) {
if (daddr == 0)
return -EINVAL;
nexthop = inet_opt->opt.faddr;
}
orig_sport = inet->inet_sport;
orig_dport = usin->sin_port;
fl4 = &inet->cork.fl.u.ip4;
rt = ip_route_connect(fl4, nexthop, inet->inet_saddr,
RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
IPPROTO_DCCP,
orig_sport, orig_dport, sk, true);
if (IS_ERR(rt))
return PTR_ERR(rt);
if (rt->rt_flags & (RTCF_MULTICAST | RTCF_BROADCAST)) {
ip_rt_put(rt);
return -ENETUNREACH;
}
if (inet_opt == NULL || !inet_opt->opt.srr)
daddr = fl4->daddr;
if (inet->inet_saddr == 0)
inet->inet_saddr = fl4->saddr;
inet->inet_rcv_saddr = inet->inet_saddr;
inet->inet_dport = usin->sin_port;
inet->inet_daddr = daddr;
inet_csk(sk)->icsk_ext_hdr_len = 0;
if (inet_opt)
inet_csk(sk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
/*
* Socket identity is still unknown (sport may be zero).
* However we set state to DCCP_REQUESTING and not releasing socket
* lock select source port, enter ourselves into the hash tables and
* complete initialization after this.
*/
dccp_set_state(sk, DCCP_REQUESTING);
err = inet_hash_connect(&dccp_death_row, sk);
if (err != 0)
goto failure;
rt = ip_route_newports(fl4, rt, orig_sport, orig_dport,
inet->inet_sport, inet->inet_dport, sk);
if (IS_ERR(rt)) {
err = PTR_ERR(rt);
rt = NULL;
goto failure;
}
/* OK, now commit destination to socket. */
sk_setup_caps(sk, &rt->dst);
dp->dccps_iss = secure_dccp_sequence_number(inet->inet_saddr,
inet->inet_daddr,
inet->inet_sport,
inet->inet_dport);
inet->inet_id = dp->dccps_iss ^ jiffies;
err = dccp_connect(sk);
rt = NULL;
if (err != 0)
goto failure;
out:
return err;
failure:
/*
* This unhashes the socket and releases the local port, if necessary.
*/
dccp_set_state(sk, DCCP_CLOSED);
ip_rt_put(rt);
sk->sk_route_caps = 0;
inet->inet_dport = 0;
goto out;
}
EXPORT_SYMBOL_GPL(dccp_v4_connect);
/*
* This routine does path mtu discovery as defined in RFC1191.
*/
static inline void dccp_do_pmtu_discovery(struct sock *sk,
const struct iphdr *iph,
u32 mtu)
{
struct dst_entry *dst;
const struct inet_sock *inet = inet_sk(sk);
const struct dccp_sock *dp = dccp_sk(sk);
/* We are not interested in DCCP_LISTEN and request_socks (RESPONSEs
* send out by Linux are always < 576bytes so they should go through
* unfragmented).
*/
if (sk->sk_state == DCCP_LISTEN)
return;
dst = inet_csk_update_pmtu(sk, mtu);
if (!dst)
return;
/* Something is about to be wrong... Remember soft error
* for the case, if this connection will not able to recover.
*/
if (mtu < dst_mtu(dst) && ip_dont_fragment(sk, dst))
sk->sk_err_soft = EMSGSIZE;
mtu = dst_mtu(dst);
if (inet->pmtudisc != IP_PMTUDISC_DONT &&
inet_csk(sk)->icsk_pmtu_cookie > mtu) {
dccp_sync_mss(sk, mtu);
/*
* From RFC 4340, sec. 14.1:
*
* DCCP-Sync packets are the best choice for upward
* probing, since DCCP-Sync probes do not risk application
* data loss.
*/
dccp_send_sync(sk, dp->dccps_gsr, DCCP_PKT_SYNC);
} /* else let the usual retransmit timer handle it */
}
static void dccp_do_redirect(struct sk_buff *skb, struct sock *sk)
{
struct dst_entry *dst = __sk_dst_check(sk, 0);
if (dst)
dst->ops->redirect(dst, sk, skb);
}
/*
* This routine is called by the ICMP module when it gets some sort of error
* condition. If err < 0 then the socket should be closed and the error
* returned to the user. If err > 0 it's just the icmp type << 8 | icmp code.
* After adjustment header points to the first 8 bytes of the tcp header. We
* need to find the appropriate port.
*
* The locking strategy used here is very "optimistic". When someone else
* accesses the socket the ICMP is just dropped and for some paths there is no
* check at all. A more general error queue to queue errors for later handling
* is probably better.
*/
static void dccp_v4_err(struct sk_buff *skb, u32 info)
{
const struct iphdr *iph = (struct iphdr *)skb->data;
const u8 offset = iph->ihl << 2;
const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset);
struct dccp_sock *dp;
struct inet_sock *inet;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
struct sock *sk;
__u64 seq;
int err;
struct net *net = dev_net(skb->dev);
if (skb->len < offset + sizeof(*dh) ||
skb->len < offset + __dccp_basic_hdr_len(dh)) {
ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
return;
}
sk = inet_lookup(net, &dccp_hashinfo,
iph->daddr, dh->dccph_dport,
iph->saddr, dh->dccph_sport, inet_iif(skb));
if (sk == NULL) {
ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
return;
}
if (sk->sk_state == DCCP_TIME_WAIT) {
inet_twsk_put(inet_twsk(sk));
return;
}
bh_lock_sock(sk);
/* If too many ICMPs get dropped on busy
* servers this needs to be solved differently.
*/
if (sock_owned_by_user(sk))
NET_INC_STATS_BH(net, LINUX_MIB_LOCKDROPPEDICMPS);
if (sk->sk_state == DCCP_CLOSED)
goto out;
dp = dccp_sk(sk);
seq = dccp_hdr_seq(dh);
if ((1 << sk->sk_state) & ~(DCCPF_REQUESTING | DCCPF_LISTEN) &&
!between48(seq, dp->dccps_awl, dp->dccps_awh)) {
NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
goto out;
}
switch (type) {
case ICMP_REDIRECT:
dccp_do_redirect(skb, sk);
goto out;
case ICMP_SOURCE_QUENCH:
/* Just silently ignore these. */
goto out;
case ICMP_PARAMETERPROB:
err = EPROTO;
break;
case ICMP_DEST_UNREACH:
if (code > NR_ICMP_UNREACH)
goto out;
if (code == ICMP_FRAG_NEEDED) { /* PMTU discovery (RFC1191) */
if (!sock_owned_by_user(sk))
dccp_do_pmtu_discovery(sk, iph, info);
goto out;
}
err = icmp_err_convert[code].errno;
break;
case ICMP_TIME_EXCEEDED:
err = EHOSTUNREACH;
break;
default:
goto out;
}
switch (sk->sk_state) {
struct request_sock *req , **prev;
case DCCP_LISTEN:
if (sock_owned_by_user(sk))
goto out;
req = inet_csk_search_req(sk, &prev, dh->dccph_dport,
iph->daddr, iph->saddr);
if (!req)
goto out;
/*
* ICMPs are not backlogged, hence we cannot get an established
* socket here.
*/
WARN_ON(req->sk);
if (!between48(seq, dccp_rsk(req)->dreq_iss,
dccp_rsk(req)->dreq_gss)) {
NET_INC_STATS_BH(net, LINUX_MIB_OUTOFWINDOWICMPS);
goto out;
}
/*
* Still in RESPOND, just remove it silently.
* There is no good way to pass the error to the newly
* created socket, and POSIX does not want network
* errors returned from accept().
*/
inet_csk_reqsk_queue_drop(sk, req, prev);
goto out;
case DCCP_REQUESTING:
case DCCP_RESPOND:
if (!sock_owned_by_user(sk)) {
DCCP_INC_STATS_BH(DCCP_MIB_ATTEMPTFAILS);
sk->sk_err = err;
sk->sk_error_report(sk);
dccp_done(sk);
} else
sk->sk_err_soft = err;
goto out;
}
/* If we've already connected we will keep trying
* until we time out, or the user gives up.
*
* rfc1122 4.2.3.9 allows to consider as hard errors
* only PROTO_UNREACH and PORT_UNREACH (well, FRAG_FAILED too,
* but it is obsoleted by pmtu discovery).
*
* Note, that in modern internet, where routing is unreliable
* and in each dark corner broken firewalls sit, sending random
* errors ordered by their masters even this two messages finally lose
* their original sense (even Linux sends invalid PORT_UNREACHs)
*
* Now we are in compliance with RFCs.
* --ANK (980905)
*/
inet = inet_sk(sk);
if (!sock_owned_by_user(sk) && inet->recverr) {
sk->sk_err = err;
sk->sk_error_report(sk);
} else /* Only an error on timeout */
sk->sk_err_soft = err;
out:
bh_unlock_sock(sk);
sock_put(sk);
}
static inline __sum16 dccp_v4_csum_finish(struct sk_buff *skb,
__be32 src, __be32 dst)
{
return csum_tcpudp_magic(src, dst, skb->len, IPPROTO_DCCP, skb->csum);
}
void dccp_v4_send_check(struct sock *sk, struct sk_buff *skb)
{
const struct inet_sock *inet = inet_sk(sk);
struct dccp_hdr *dh = dccp_hdr(skb);
dccp_csum_outgoing(skb);
dh->dccph_checksum = dccp_v4_csum_finish(skb,
inet->inet_saddr,
inet->inet_daddr);
}
EXPORT_SYMBOL_GPL(dccp_v4_send_check);
static inline u64 dccp_v4_init_sequence(const struct sk_buff *skb)
{
return secure_dccp_sequence_number(ip_hdr(skb)->daddr,
ip_hdr(skb)->saddr,
dccp_hdr(skb)->dccph_dport,
dccp_hdr(skb)->dccph_sport);
}
/*
* The three way handshake has completed - we got a valid ACK or DATAACK -
* now create the new socket.
*
* This is the equivalent of TCP's tcp_v4_syn_recv_sock
*/
struct sock *dccp_v4_request_recv_sock(struct sock *sk, struct sk_buff *skb,
struct request_sock *req,
struct dst_entry *dst)
{
struct inet_request_sock *ireq;
struct inet_sock *newinet;
struct sock *newsk;
if (sk_acceptq_is_full(sk))
goto exit_overflow;
newsk = dccp_create_openreq_child(sk, req, skb);
if (newsk == NULL)
goto exit_nonewsk;
newinet = inet_sk(newsk);
ireq = inet_rsk(req);
newinet->inet_daddr = ireq->rmt_addr;
newinet->inet_rcv_saddr = ireq->loc_addr;
newinet->inet_saddr = ireq->loc_addr;
newinet->inet_opt = ireq->opt;
ireq->opt = NULL;
newinet->mc_index = inet_iif(skb);
newinet->mc_ttl = ip_hdr(skb)->ttl;
newinet->inet_id = jiffies;
if (dst == NULL && (dst = inet_csk_route_child_sock(sk, newsk, req)) == NULL)
goto put_and_exit;
sk_setup_caps(newsk, dst);
dccp_sync_mss(newsk, dst_mtu(dst));
if (__inet_inherit_port(sk, newsk) < 0)
goto put_and_exit;
__inet_hash_nolisten(newsk, NULL);
return newsk;
exit_overflow:
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENOVERFLOWS);
exit_nonewsk:
dst_release(dst);
exit:
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
return NULL;
put_and_exit:
inet: Fix kmemleak in tcp_v4/6_syn_recv_sock and dccp_v4/6_request_recv_sock If in either of the above functions inet_csk_route_child_sock() or __inet_inherit_port() fails, the newsk will not be freed: unreferenced object 0xffff88022e8a92c0 (size 1592): comm "softirq", pid 0, jiffies 4294946244 (age 726.160s) hex dump (first 32 bytes): 0a 01 01 01 0a 01 01 02 00 00 00 00 a7 cc 16 00 ................ 02 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8153d190>] kmemleak_alloc+0x21/0x3e [<ffffffff810ab3e7>] kmem_cache_alloc+0xb5/0xc5 [<ffffffff8149b65b>] sk_prot_alloc.isra.53+0x2b/0xcd [<ffffffff8149b784>] sk_clone_lock+0x16/0x21e [<ffffffff814d711a>] inet_csk_clone_lock+0x10/0x7b [<ffffffff814ebbc3>] tcp_create_openreq_child+0x21/0x481 [<ffffffff814e8fa5>] tcp_v4_syn_recv_sock+0x3a/0x23b [<ffffffff814ec5ba>] tcp_check_req+0x29f/0x416 [<ffffffff814e8e10>] tcp_v4_do_rcv+0x161/0x2bc [<ffffffff814eb917>] tcp_v4_rcv+0x6c9/0x701 [<ffffffff814cea9f>] ip_local_deliver_finish+0x70/0xc4 [<ffffffff814cec20>] ip_local_deliver+0x4e/0x7f [<ffffffff814ce9f8>] ip_rcv_finish+0x1fc/0x233 [<ffffffff814cee68>] ip_rcv+0x217/0x267 [<ffffffff814a7bbe>] __netif_receive_skb+0x49e/0x553 [<ffffffff814a7cc3>] netif_receive_skb+0x50/0x82 This happens, because sk_clone_lock initializes sk_refcnt to 2, and thus a single sock_put() is not enough to free the memory. Additionally, things like xfrm, memcg, cookie_values,... may have been initialized. We have to free them properly. This is fixed by forcing a call to tcp_done(), ending up in inet_csk_destroy_sock, doing the final sock_put(). tcp_done() is necessary, because it ends up doing all the cleanup on xfrm, memcg, cookie_values, xfrm,... Before calling tcp_done, we have to set the socket to SOCK_DEAD, to force it entering inet_csk_destroy_sock. To avoid the warning in inet_csk_destroy_sock, inet_num has to be set to 0. As inet_csk_destroy_sock does a dec on orphan_count, we first have to increase it. Calling tcp_done() allows us to remove the calls to tcp_clear_xmit_timer() and tcp_cleanup_congestion_control(). A similar approach is taken for dccp by calling dccp_done(). This is in the kernel since 093d282321 (tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()), thus since version >= 2.6.37. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-14 08:07:58 +04:00
inet_csk_prepare_forced_close(newsk);
dccp_done(newsk);
goto exit;
}
EXPORT_SYMBOL_GPL(dccp_v4_request_recv_sock);
static struct sock *dccp_v4_hnd_req(struct sock *sk, struct sk_buff *skb)
{
const struct dccp_hdr *dh = dccp_hdr(skb);
const struct iphdr *iph = ip_hdr(skb);
struct sock *nsk;
struct request_sock **prev;
/* Find possible connection requests. */
struct request_sock *req = inet_csk_search_req(sk, &prev,
dh->dccph_sport,
iph->saddr, iph->daddr);
if (req != NULL)
return dccp_check_req(sk, skb, req, prev);
nsk = inet_lookup_established(sock_net(sk), &dccp_hashinfo,
iph->saddr, dh->dccph_sport,
iph->daddr, dh->dccph_dport,
inet_iif(skb));
if (nsk != NULL) {
if (nsk->sk_state != DCCP_TIME_WAIT) {
bh_lock_sock(nsk);
return nsk;
}
inet_twsk_put(inet_twsk(nsk));
return NULL;
}
return sk;
}
static struct dst_entry* dccp_v4_route_skb(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
struct rtable *rt;
const struct iphdr *iph = ip_hdr(skb);
struct flowi4 fl4 = {
.flowi4_oif = inet_iif(skb),
.daddr = iph->saddr,
.saddr = iph->daddr,
.flowi4_tos = RT_CONN_FLAGS(sk),
.flowi4_proto = sk->sk_protocol,
.fl4_sport = dccp_hdr(skb)->dccph_dport,
.fl4_dport = dccp_hdr(skb)->dccph_sport,
};
security_skb_classify_flow(skb, flowi4_to_flowi(&fl4));
rt = ip_route_output_flow(net, &fl4, sk);
if (IS_ERR(rt)) {
IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
return NULL;
}
return &rt->dst;
}
static int dccp_v4_send_response(struct sock *sk, struct request_sock *req,
struct request_values *rv_unused)
{
int err = -1;
struct sk_buff *skb;
struct dst_entry *dst;
struct flowi4 fl4;
dst = inet_csk_route_req(sk, &fl4, req);
if (dst == NULL)
goto out;
skb = dccp_make_response(sk, dst, req);
if (skb != NULL) {
const struct inet_request_sock *ireq = inet_rsk(req);
struct dccp_hdr *dh = dccp_hdr(skb);
dh->dccph_checksum = dccp_v4_csum_finish(skb, ireq->loc_addr,
ireq->rmt_addr);
err = ip_build_and_send_pkt(skb, sk, ireq->loc_addr,
ireq->rmt_addr,
ireq->opt);
err = net_xmit_eval(err);
}
out:
dst_release(dst);
return err;
}
static void dccp_v4_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
{
int err;
const struct iphdr *rxiph;
struct sk_buff *skb;
struct dst_entry *dst;
struct net *net = dev_net(skb_dst(rxskb)->dev);
struct sock *ctl_sk = net->dccp.v4_ctl_sk;
/* Never send a reset in response to a reset. */
if (dccp_hdr(rxskb)->dccph_type == DCCP_PKT_RESET)
return;
if (skb_rtable(rxskb)->rt_type != RTN_LOCAL)
return;
dst = dccp_v4_route_skb(net, ctl_sk, rxskb);
if (dst == NULL)
return;
skb = dccp_ctl_make_reset(ctl_sk, rxskb);
if (skb == NULL)
goto out;
rxiph = ip_hdr(rxskb);
dccp_hdr(skb)->dccph_checksum = dccp_v4_csum_finish(skb, rxiph->saddr,
rxiph->daddr);
skb_dst_set(skb, dst_clone(dst));
bh_lock_sock(ctl_sk);
err = ip_build_and_send_pkt(skb, ctl_sk,
rxiph->daddr, rxiph->saddr, NULL);
bh_unlock_sock(ctl_sk);
if (net_xmit_eval(err) == 0) {
DCCP_INC_STATS_BH(DCCP_MIB_OUTSEGS);
DCCP_INC_STATS_BH(DCCP_MIB_OUTRSTS);
}
out:
dst_release(dst);
}
static void dccp_v4_reqsk_destructor(struct request_sock *req)
{
dccp_feat_list_purge(&dccp_rsk(req)->dreq_featneg);
kfree(inet_rsk(req)->opt);
}
void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req)
{
}
EXPORT_SYMBOL(dccp_syn_ack_timeout);
static struct request_sock_ops dccp_request_sock_ops __read_mostly = {
.family = PF_INET,
.obj_size = sizeof(struct dccp_request_sock),
.rtx_syn_ack = dccp_v4_send_response,
.send_ack = dccp_reqsk_send_ack,
.destructor = dccp_v4_reqsk_destructor,
.send_reset = dccp_v4_ctl_send_reset,
.syn_ack_timeout = dccp_syn_ack_timeout,
};
int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
{
struct inet_request_sock *ireq;
struct request_sock *req;
struct dccp_request_sock *dreq;
const __be32 service = dccp_hdr_request(skb)->dccph_req_service;
struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
/* Never answer to DCCP_PKT_REQUESTs send to broadcast or multicast */
if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
[DCCP]: Twice the wrong reset code in receiving connection-Requests This fixes two bugs in processing of connection-Requests in v{4,6}_conn_request: 1. Due to using the variable `reset_code', the Reset code generated internally by dccp_parse_options() is overwritten with the initialised value ("Too Busy") of reset_code, which is not what is intended. 2. When receiving a connection-Request on a multicast or broadcast address, no Reset should be generated, to avoid storms of such packets. Instead of jumping to the `drop' label, the v{4,6}_conn_request functions now return 0. Below is why in my understanding this is correct: When the conn_request function returns < 0, then the caller, dccp_rcv_state_process(), returns 1. In all instances where dccp_rcv_state_process is called (dccp_v4_do_rcv, dccp_v6_do_rcv, and dccp_child_process), a return value of != 0 from dccp_rcv_state_process() means that a Reset is generated. If on the other hand the conn_request function returns 0, the packet is discarded and no Reset is generated. Note: There may be a related problem when sending the Response, due to the following. if (dccp_v6_send_response(sk, req, NULL)) goto drop_and_free; /* ... */ drop_and_free: return -1; In this case, if send_response fails due to transmission errors, the next thing that is generated is a Reset with a code "Too Busy". I haven't been able to conjure up such a condition, but it might be good to change the behaviour here also (not done by this patch). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-05 01:52:28 +04:00
return 0; /* discard, don't send a reset here */
if (dccp_bad_service_code(sk, service)) {
[DCCP]: Twice the wrong reset code in receiving connection-Requests This fixes two bugs in processing of connection-Requests in v{4,6}_conn_request: 1. Due to using the variable `reset_code', the Reset code generated internally by dccp_parse_options() is overwritten with the initialised value ("Too Busy") of reset_code, which is not what is intended. 2. When receiving a connection-Request on a multicast or broadcast address, no Reset should be generated, to avoid storms of such packets. Instead of jumping to the `drop' label, the v{4,6}_conn_request functions now return 0. Below is why in my understanding this is correct: When the conn_request function returns < 0, then the caller, dccp_rcv_state_process(), returns 1. In all instances where dccp_rcv_state_process is called (dccp_v4_do_rcv, dccp_v6_do_rcv, and dccp_child_process), a return value of != 0 from dccp_rcv_state_process() means that a Reset is generated. If on the other hand the conn_request function returns 0, the packet is discarded and no Reset is generated. Note: There may be a related problem when sending the Response, due to the following. if (dccp_v6_send_response(sk, req, NULL)) goto drop_and_free; /* ... */ drop_and_free: return -1; In this case, if send_response fails due to transmission errors, the next thing that is generated is a Reset with a code "Too Busy". I haven't been able to conjure up such a condition, but it might be good to change the behaviour here also (not done by this patch). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-05 01:52:28 +04:00
dcb->dccpd_reset_code = DCCP_RESET_CODE_BAD_SERVICE_CODE;
goto drop;
}
/*
* TW buckets are converted to open requests without
* limitations, they conserve resources and peer is
* evidently real one.
*/
[DCCP]: Twice the wrong reset code in receiving connection-Requests This fixes two bugs in processing of connection-Requests in v{4,6}_conn_request: 1. Due to using the variable `reset_code', the Reset code generated internally by dccp_parse_options() is overwritten with the initialised value ("Too Busy") of reset_code, which is not what is intended. 2. When receiving a connection-Request on a multicast or broadcast address, no Reset should be generated, to avoid storms of such packets. Instead of jumping to the `drop' label, the v{4,6}_conn_request functions now return 0. Below is why in my understanding this is correct: When the conn_request function returns < 0, then the caller, dccp_rcv_state_process(), returns 1. In all instances where dccp_rcv_state_process is called (dccp_v4_do_rcv, dccp_v6_do_rcv, and dccp_child_process), a return value of != 0 from dccp_rcv_state_process() means that a Reset is generated. If on the other hand the conn_request function returns 0, the packet is discarded and no Reset is generated. Note: There may be a related problem when sending the Response, due to the following. if (dccp_v6_send_response(sk, req, NULL)) goto drop_and_free; /* ... */ drop_and_free: return -1; In this case, if send_response fails due to transmission errors, the next thing that is generated is a Reset with a code "Too Busy". I haven't been able to conjure up such a condition, but it might be good to change the behaviour here also (not done by this patch). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-05 01:52:28 +04:00
dcb->dccpd_reset_code = DCCP_RESET_CODE_TOO_BUSY;
if (inet_csk_reqsk_queue_is_full(sk))
goto drop;
/*
* Accept backlog is full. If we have already queued enough
* of warm entries in syn queue, drop request. It is better than
* clogging syn queue with openreqs with exponentially increasing
* timeout.
*/
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
goto drop;
req = inet_reqsk_alloc(&dccp_request_sock_ops);
if (req == NULL)
goto drop;
if (dccp_reqsk_init(req, dccp_sk(sk), skb))
goto drop_and_free;
dreq = dccp_rsk(req);
if (dccp_parse_options(sk, dreq, skb))
goto drop_and_free;
if (security_inet_conn_request(sk, skb, req))
goto drop_and_free;
ireq = inet_rsk(req);
ireq->loc_addr = ip_hdr(skb)->daddr;
ireq->rmt_addr = ip_hdr(skb)->saddr;
/*
* Step 3: Process LISTEN state
*
* Set S.ISR, S.GSR, S.SWL, S.SWH from packet or Init Cookie
*
* Setting S.SWL/S.SWH to is deferred to dccp_create_openreq_child().
*/
dreq->dreq_isr = dcb->dccpd_seq;
dreq->dreq_gsr = dreq->dreq_isr;
dreq->dreq_iss = dccp_v4_init_sequence(skb);
dreq->dreq_gss = dreq->dreq_iss;
dreq->dreq_service = service;
if (dccp_v4_send_response(sk, req, NULL))
goto drop_and_free;
inet_csk_reqsk_queue_hash_add(sk, req, DCCP_TIMEOUT_INIT);
return 0;
drop_and_free:
reqsk_free(req);
drop:
DCCP_INC_STATS_BH(DCCP_MIB_ATTEMPTFAILS);
return -1;
}
EXPORT_SYMBOL_GPL(dccp_v4_conn_request);
int dccp_v4_do_rcv(struct sock *sk, struct sk_buff *skb)
{
struct dccp_hdr *dh = dccp_hdr(skb);
if (sk->sk_state == DCCP_OPEN) { /* Fast path */
if (dccp_rcv_established(sk, skb, dh, skb->len))
goto reset;
return 0;
}
/*
* Step 3: Process LISTEN state
* If P.type == Request or P contains a valid Init Cookie option,
* (* Must scan the packet's options to check for Init
* Cookies. Only Init Cookies are processed here,
* however; other options are processed in Step 8. This
* scan need only be performed if the endpoint uses Init
* Cookies *)
* (* Generate a new socket and switch to that socket *)
* Set S := new socket for this port pair
* S.state = RESPOND
* Choose S.ISS (initial seqno) or set from Init Cookies
* Initialize S.GAR := S.ISS
* Set S.ISR, S.GSR, S.SWL, S.SWH from packet or Init Cookies
* Continue with S.state == RESPOND
* (* A Response packet will be generated in Step 11 *)
* Otherwise,
* Generate Reset(No Connection) unless P.type == Reset
* Drop packet and return
*
* NOTE: the check for the packet types is done in
* dccp_rcv_state_process
*/
if (sk->sk_state == DCCP_LISTEN) {
struct sock *nsk = dccp_v4_hnd_req(sk, skb);
if (nsk == NULL)
goto discard;
if (nsk != sk) {
if (dccp_child_process(sk, nsk, skb))
goto reset;
return 0;
}
}
if (dccp_rcv_state_process(sk, skb, dh, skb->len))
goto reset;
return 0;
reset:
dccp_v4_ctl_send_reset(sk, skb);
discard:
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(dccp_v4_do_rcv);
/**
* dccp_invalid_packet - check for malformed packets
* Implements RFC 4340, 8.5: Step 1: Check header basics
* Packets that fail these checks are ignored and do not receive Resets.
*/
int dccp_invalid_packet(struct sk_buff *skb)
{
const struct dccp_hdr *dh;
unsigned int cscov;
if (skb->pkt_type != PACKET_HOST)
return 1;
/* If the packet is shorter than 12 bytes, drop packet and return */
if (!pskb_may_pull(skb, sizeof(struct dccp_hdr))) {
DCCP_WARN("pskb_may_pull failed\n");
return 1;
}
dh = dccp_hdr(skb);
/* If P.type is not understood, drop packet and return */
if (dh->dccph_type >= DCCP_PKT_INVALID) {
DCCP_WARN("invalid packet type\n");
return 1;
}
/*
* If P.Data Offset is too small for packet type, drop packet and return
*/
if (dh->dccph_doff < dccp_hdr_len(skb) / sizeof(u32)) {
DCCP_WARN("P.Data Offset(%u) too small\n", dh->dccph_doff);
return 1;
}
/*
* If P.Data Offset is too too large for packet, drop packet and return
*/
if (!pskb_may_pull(skb, dh->dccph_doff * sizeof(u32))) {
DCCP_WARN("P.Data Offset(%u) too large\n", dh->dccph_doff);
return 1;
}
/*
* If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet
* has short sequence numbers), drop packet and return
*/
if ((dh->dccph_type < DCCP_PKT_DATA ||
dh->dccph_type > DCCP_PKT_DATAACK) && dh->dccph_x == 0) {
DCCP_WARN("P.type (%s) not Data || [Data]Ack, while P.X == 0\n",
dccp_packet_name(dh->dccph_type));
return 1;
}
/*
* If P.CsCov is too large for the packet size, drop packet and return.
* This must come _before_ checksumming (not as RFC 4340 suggests).
*/
cscov = dccp_csum_coverage(skb);
if (cscov > skb->len) {
DCCP_WARN("P.CsCov %u exceeds packet length %d\n",
dh->dccph_cscov, skb->len);
return 1;
}
/* If header checksum is incorrect, drop packet and return.
* (This step is completed in the AF-dependent functions.) */
skb->csum = skb_checksum(skb, 0, cscov, 0);
return 0;
}
EXPORT_SYMBOL_GPL(dccp_invalid_packet);
/* this is called when real data arrives */
static int dccp_v4_rcv(struct sk_buff *skb)
{
const struct dccp_hdr *dh;
const struct iphdr *iph;
struct sock *sk;
int min_cov;
/* Step 1: Check header basics */
if (dccp_invalid_packet(skb))
goto discard_it;
iph = ip_hdr(skb);
/* Step 1: If header checksum is incorrect, drop packet and return */
if (dccp_v4_csum_finish(skb, iph->saddr, iph->daddr)) {
DCCP_WARN("dropped packet with invalid checksum\n");
goto discard_it;
}
dh = dccp_hdr(skb);
DCCP_SKB_CB(skb)->dccpd_seq = dccp_hdr_seq(dh);
DCCP_SKB_CB(skb)->dccpd_type = dh->dccph_type;
dccp_pr_debug("%8.8s src=%pI4@%-5d dst=%pI4@%-5d seq=%llu",
dccp_packet_name(dh->dccph_type),
&iph->saddr, ntohs(dh->dccph_sport),
&iph->daddr, ntohs(dh->dccph_dport),
(unsigned long long) DCCP_SKB_CB(skb)->dccpd_seq);
if (dccp_packet_without_ack(skb)) {
DCCP_SKB_CB(skb)->dccpd_ack_seq = DCCP_PKT_WITHOUT_ACK_SEQ;
dccp_pr_debug_cat("\n");
} else {
DCCP_SKB_CB(skb)->dccpd_ack_seq = dccp_hdr_ack_seq(skb);
dccp_pr_debug_cat(", ack=%llu\n", (unsigned long long)
DCCP_SKB_CB(skb)->dccpd_ack_seq);
}
/* Step 2:
* Look up flow ID in table and get corresponding socket */
sk = __inet_lookup_skb(&dccp_hashinfo, skb,
dh->dccph_sport, dh->dccph_dport);
/*
* Step 2:
* If no socket ...
*/
if (sk == NULL) {
dccp_pr_debug("failed to look up flow ID in table and "
"get corresponding socket\n");
goto no_dccp_socket;
}
/*
* Step 2:
* ... or S.state == TIMEWAIT,
* Generate Reset(No Connection) unless P.type == Reset
* Drop packet and return
*/
if (sk->sk_state == DCCP_TIME_WAIT) {
dccp_pr_debug("sk->sk_state == DCCP_TIME_WAIT: do_time_wait\n");
inet_twsk_put(inet_twsk(sk));
goto no_dccp_socket;
}
/*
* RFC 4340, sec. 9.2.1: Minimum Checksum Coverage
* o if MinCsCov = 0, only packets with CsCov = 0 are accepted
* o if MinCsCov > 0, also accept packets with CsCov >= MinCsCov
*/
min_cov = dccp_sk(sk)->dccps_pcrlen;
if (dh->dccph_cscov && (min_cov == 0 || dh->dccph_cscov < min_cov)) {
dccp_pr_debug("Packet CsCov %d does not satisfy MinCsCov %d\n",
dh->dccph_cscov, min_cov);
/* FIXME: "Such packets SHOULD be reported using Data Dropped
* options (Section 11.7) with Drop Code 0, Protocol
* Constraints." */
goto discard_and_relse;
}
if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb))
goto discard_and_relse;
nf_reset(skb);
return sk_receive_skb(sk, skb, 1);
no_dccp_socket:
if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
goto discard_it;
/*
* Step 2:
* If no socket ...
* Generate Reset(No Connection) unless P.type == Reset
* Drop packet and return
*/
if (dh->dccph_type != DCCP_PKT_RESET) {
DCCP_SKB_CB(skb)->dccpd_reset_code =
DCCP_RESET_CODE_NO_CONNECTION;
dccp_v4_ctl_send_reset(sk, skb);
}
discard_it:
kfree_skb(skb);
return 0;
discard_and_relse:
sock_put(sk);
goto discard_it;
}
static const struct inet_connection_sock_af_ops dccp_ipv4_af_ops = {
.queue_xmit = ip_queue_xmit,
.send_check = dccp_v4_send_check,
.rebuild_header = inet_sk_rebuild_header,
.conn_request = dccp_v4_conn_request,
.syn_recv_sock = dccp_v4_request_recv_sock,
.net_header_len = sizeof(struct iphdr),
.setsockopt = ip_setsockopt,
.getsockopt = ip_getsockopt,
.addr2sockaddr = inet_csk_addr2sockaddr,
.sockaddr_len = sizeof(struct sockaddr_in),
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 15:06:04 +03:00
.bind_conflict = inet_csk_bind_conflict,
#ifdef CONFIG_COMPAT
.compat_setsockopt = compat_ip_setsockopt,
.compat_getsockopt = compat_ip_getsockopt,
#endif
};
static int dccp_v4_init_sock(struct sock *sk)
{
static __u8 dccp_v4_ctl_sock_initialized;
int err = dccp_init_sock(sk, dccp_v4_ctl_sock_initialized);
if (err == 0) {
if (unlikely(!dccp_v4_ctl_sock_initialized))
dccp_v4_ctl_sock_initialized = 1;
inet_csk(sk)->icsk_af_ops = &dccp_ipv4_af_ops;
}
return err;
}
static struct timewait_sock_ops dccp_timewait_sock_ops = {
.twsk_obj_size = sizeof(struct inet_timewait_sock),
};
static struct proto dccp_v4_prot = {
.name = "DCCP",
.owner = THIS_MODULE,
.close = dccp_close,
.connect = dccp_v4_connect,
.disconnect = dccp_disconnect,
.ioctl = dccp_ioctl,
.init = dccp_v4_init_sock,
.setsockopt = dccp_setsockopt,
.getsockopt = dccp_getsockopt,
.sendmsg = dccp_sendmsg,
.recvmsg = dccp_recvmsg,
.backlog_rcv = dccp_v4_do_rcv,
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 15:06:04 +03:00
.hash = inet_hash,
.unhash = inet_unhash,
.accept = inet_csk_accept,
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 15:06:04 +03:00
.get_port = inet_csk_get_port,
.shutdown = dccp_shutdown,
.destroy = dccp_destroy_sock,
.orphan_count = &dccp_orphan_count,
.max_header = MAX_DCCP_HEADER,
.obj_size = sizeof(struct dccp_sock),
.slab_flags = SLAB_DESTROY_BY_RCU,
.rsk_prot = &dccp_request_sock_ops,
.twsk_prot = &dccp_timewait_sock_ops,
.h.hashinfo = &dccp_hashinfo,
#ifdef CONFIG_COMPAT
.compat_setsockopt = compat_dccp_setsockopt,
.compat_getsockopt = compat_dccp_getsockopt,
#endif
};
static const struct net_protocol dccp_v4_protocol = {
.handler = dccp_v4_rcv,
.err_handler = dccp_v4_err,
.no_policy = 1,
.netns_ok = 1,
};
static const struct proto_ops inet_dccp_ops = {
.family = PF_INET,
.owner = THIS_MODULE,
.release = inet_release,
.bind = inet_bind,
.connect = inet_stream_connect,
.socketpair = sock_no_socketpair,
.accept = inet_accept,
.getname = inet_getname,
/* FIXME: work on tcp_poll to rename it to inet_csk_poll */
.poll = dccp_poll,
.ioctl = inet_ioctl,
/* FIXME: work on inet_listen to rename it to sock_common_listen */
.listen = inet_dccp_listen,
.shutdown = inet_shutdown,
.setsockopt = sock_common_setsockopt,
.getsockopt = sock_common_getsockopt,
.sendmsg = inet_sendmsg,
.recvmsg = sock_common_recvmsg,
.mmap = sock_no_mmap,
.sendpage = sock_no_sendpage,
#ifdef CONFIG_COMPAT
.compat_setsockopt = compat_sock_common_setsockopt,
.compat_getsockopt = compat_sock_common_getsockopt,
#endif
};
static struct inet_protosw dccp_v4_protosw = {
.type = SOCK_DCCP,
.protocol = IPPROTO_DCCP,
.prot = &dccp_v4_prot,
.ops = &inet_dccp_ops,
.no_check = 0,
.flags = INET_PROTOSW_ICSK,
};
static int __net_init dccp_v4_init_net(struct net *net)
{
if (dccp_hashinfo.bhash == NULL)
return -ESOCKTNOSUPPORT;
return inet_ctl_sock_create(&net->dccp.v4_ctl_sk, PF_INET,
SOCK_DCCP, IPPROTO_DCCP, net);
}
static void __net_exit dccp_v4_exit_net(struct net *net)
{
inet_ctl_sock_destroy(net->dccp.v4_ctl_sk);
}
static struct pernet_operations dccp_v4_ops = {
.init = dccp_v4_init_net,
.exit = dccp_v4_exit_net,
};
static int __init dccp_v4_init(void)
{
int err = proto_register(&dccp_v4_prot, 1);
if (err != 0)
goto out;
err = inet_add_protocol(&dccp_v4_protocol, IPPROTO_DCCP);
if (err != 0)
goto out_proto_unregister;
inet_register_protosw(&dccp_v4_protosw);
err = register_pernet_subsys(&dccp_v4_ops);
if (err)
goto out_destroy_ctl_sock;
out:
return err;
out_destroy_ctl_sock:
inet_unregister_protosw(&dccp_v4_protosw);
inet_del_protocol(&dccp_v4_protocol, IPPROTO_DCCP);
out_proto_unregister:
proto_unregister(&dccp_v4_prot);
goto out;
}
static void __exit dccp_v4_exit(void)
{
unregister_pernet_subsys(&dccp_v4_ops);
inet_unregister_protosw(&dccp_v4_protosw);
inet_del_protocol(&dccp_v4_protocol, IPPROTO_DCCP);
proto_unregister(&dccp_v4_prot);
}
module_init(dccp_v4_init);
module_exit(dccp_v4_exit);
/*
* __stringify doesn't likes enums, so use SOCK_DCCP (6) and IPPROTO_DCCP (33)
* values directly, Also cover the case where the protocol is not specified,
* i.e. net-pf-PF_INET-proto-0-type-SOCK_DCCP
*/
MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 33, 6);
MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 0, 6);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Arnaldo Carvalho de Melo <acme@mandriva.com>");
MODULE_DESCRIPTION("DCCP - Datagram Congestion Controlled Protocol");