WSL2-Linux-Kernel/tools/perf/tests/llvm.c

180 строки
4.0 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "tests.h"
#include "debug.h"
#ifdef HAVE_LIBBPF_SUPPORT
#include <bpf/libbpf.h>
#include <util/llvm-utils.h>
#include "llvm.h"
static int test__bpf_parsing(void *obj_buf, size_t obj_buf_sz)
{
struct bpf_object *obj;
obj = bpf_object__open_buffer(obj_buf, obj_buf_sz, NULL);
if (libbpf_get_error(obj))
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
return TEST_FAIL;
bpf_object__close(obj);
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
return TEST_OK;
}
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
static struct {
const char *source;
const char *desc;
perf test: Add libbpf relocation checker There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-25 12:55:48 +03:00
bool should_load_fail;
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
} bpf_source_table[__LLVM_TESTCASE_MAX] = {
[LLVM_TESTCASE_BASE] = {
.source = test_llvm__bpf_base_prog,
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Basic BPF llvm compile",
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
},
[LLVM_TESTCASE_KBUILD] = {
.source = test_llvm__bpf_test_kbuild_prog,
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "kbuild searching",
},
perf test: Test the BPF prologue adding infrastructure This patch introduces a new BPF script to test the BPF prologue adding routines. The new script probes at null_lseek, which is the function pointer used when we try to lseek on '/dev/null'. The null_lseek function is chosen because it is used by function pointers, so we don't need to consider inlining and LTO. By extracting file->f_mode, bpf-script-test-prologue.c should know whether the file is writable or readonly. According to llseek_loop() and bpf-script-test-prologue.c, one fourth of total lseeks should be collected. Committer note: Testing it: # perf test -v BPF <SNIP> Kernel build dir is set to /lib/modules/4.3.0+/build set env: KBUILD_DIR=/lib/modules/4.3.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-test-prologue.c * Test BPF prologue */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define SEC(NAME) __attribute__((section(NAME), used)) #include <uapi/linux/fs.h> #define FMODE_READ 0x1 #define FMODE_WRITE 0x2 static void (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) = (void *) 6; SEC("func=null_lseek file->f_mode offset orig") int bpf_func__null_lseek(void *ctx, int err, unsigned long f_mode, unsigned long offset, unsigned long orig) { if (err) return 0; if (f_mode & FMODE_WRITE) return 0; if (offset & 1) return 0; if (orig == SEEK_CUR) return 0; return 1; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - libbpf: loading object '[bpf_prologue_test]' from buffer libbpf: section .strtab, size 135, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=null_lseek file->f_mode offset orig, size 112, link 0, flags 6, type=1 libbpf: found program func=null_lseek file->f_mode offset orig libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_prologue_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_prologue_test] is 40300 libbpf: section .symtab, size 168, link 1, flags 0, type=2 bpf: config program 'func=null_lseek file->f_mode offset orig' symbol:null_lseek file:(null) line:0 offset:0 return:0 lazy:(null) parsing arg: file->f_mode into file, f_mode(1) parsing arg: offset into offset parsing arg: orig into orig bpf: config 'func=null_lseek file->f_mode offset orig' is ok Looking at the vmlinux_path (7 entries long) Using /lib/modules/4.3.0+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.3.0+/build/vmlinux Try to find probe point from debuginfo. Matched function: null_lseek Probe point found: null_lseek+0 Searching 'file' variable in context. Converting variable file into trace event. converting f_mode in file f_mode type is unsigned int. Searching 'offset' variable in context. Converting variable offset into trace event. offset type is long long int. Searching 'orig' variable in context. Converting variable orig into trace event. orig type is int. Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: p:perf_bpf_probe/func _text+4840528 f_mode=+68(%di):u32 offset=%si:s64 orig=%dx:s32 libbpf: don't need create maps for [bpf_prologue_test] prologue: pass validation prologue: slow path prologue: fetch arg 0, base reg is %di prologue: arg 0: offset 68 prologue: fetch arg 1, base reg is %si prologue: fetch arg 2, base reg is %dx add bpf event perf_bpf_probe:func and attach bpf program 3 adding perf_bpf_probe:func adding perf_bpf_probe:func to 0x51672c0 mmap size 1052672B Opening /sys/kernel/debug/tracing//kprobe_events write=1 Opening /sys/kernel/debug/tracing//uprobe_events write=1 Parsing probe_events: p:perf_bpf_probe/func _text+4840528 f_mode=+68(%di):u32 offset=%si:s64 orig=%dx:s32 Group:perf_bpf_probe Event:func probe:p Writing event: -:perf_bpf_probe/func test child finished with 0 ---- end ---- Test BPF filter: Ok # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447675815-166222-13-git-send-email-wangnan0@huawei.com [ Added tools/perf/tests/llvm-src-prologue.c to .gitignore ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-16 15:10:14 +03:00
[LLVM_TESTCASE_BPF_PROLOGUE] = {
.source = test_llvm__bpf_test_prologue_prog,
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Compile source for BPF prologue generation",
perf test: Test the BPF prologue adding infrastructure This patch introduces a new BPF script to test the BPF prologue adding routines. The new script probes at null_lseek, which is the function pointer used when we try to lseek on '/dev/null'. The null_lseek function is chosen because it is used by function pointers, so we don't need to consider inlining and LTO. By extracting file->f_mode, bpf-script-test-prologue.c should know whether the file is writable or readonly. According to llseek_loop() and bpf-script-test-prologue.c, one fourth of total lseeks should be collected. Committer note: Testing it: # perf test -v BPF <SNIP> Kernel build dir is set to /lib/modules/4.3.0+/build set env: KBUILD_DIR=/lib/modules/4.3.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-test-prologue.c * Test BPF prologue */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define SEC(NAME) __attribute__((section(NAME), used)) #include <uapi/linux/fs.h> #define FMODE_READ 0x1 #define FMODE_WRITE 0x2 static void (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) = (void *) 6; SEC("func=null_lseek file->f_mode offset orig") int bpf_func__null_lseek(void *ctx, int err, unsigned long f_mode, unsigned long offset, unsigned long orig) { if (err) return 0; if (f_mode & FMODE_WRITE) return 0; if (offset & 1) return 0; if (orig == SEEK_CUR) return 0; return 1; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - libbpf: loading object '[bpf_prologue_test]' from buffer libbpf: section .strtab, size 135, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=null_lseek file->f_mode offset orig, size 112, link 0, flags 6, type=1 libbpf: found program func=null_lseek file->f_mode offset orig libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_prologue_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_prologue_test] is 40300 libbpf: section .symtab, size 168, link 1, flags 0, type=2 bpf: config program 'func=null_lseek file->f_mode offset orig' symbol:null_lseek file:(null) line:0 offset:0 return:0 lazy:(null) parsing arg: file->f_mode into file, f_mode(1) parsing arg: offset into offset parsing arg: orig into orig bpf: config 'func=null_lseek file->f_mode offset orig' is ok Looking at the vmlinux_path (7 entries long) Using /lib/modules/4.3.0+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.3.0+/build/vmlinux Try to find probe point from debuginfo. Matched function: null_lseek Probe point found: null_lseek+0 Searching 'file' variable in context. Converting variable file into trace event. converting f_mode in file f_mode type is unsigned int. Searching 'offset' variable in context. Converting variable offset into trace event. offset type is long long int. Searching 'orig' variable in context. Converting variable orig into trace event. orig type is int. Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: p:perf_bpf_probe/func _text+4840528 f_mode=+68(%di):u32 offset=%si:s64 orig=%dx:s32 libbpf: don't need create maps for [bpf_prologue_test] prologue: pass validation prologue: slow path prologue: fetch arg 0, base reg is %di prologue: arg 0: offset 68 prologue: fetch arg 1, base reg is %si prologue: fetch arg 2, base reg is %dx add bpf event perf_bpf_probe:func and attach bpf program 3 adding perf_bpf_probe:func adding perf_bpf_probe:func to 0x51672c0 mmap size 1052672B Opening /sys/kernel/debug/tracing//kprobe_events write=1 Opening /sys/kernel/debug/tracing//uprobe_events write=1 Parsing probe_events: p:perf_bpf_probe/func _text+4840528 f_mode=+68(%di):u32 offset=%si:s64 orig=%dx:s32 Group:perf_bpf_probe Event:func probe:p Writing event: -:perf_bpf_probe/func test child finished with 0 ---- end ---- Test BPF filter: Ok # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447675815-166222-13-git-send-email-wangnan0@huawei.com [ Added tools/perf/tests/llvm-src-prologue.c to .gitignore ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-16 15:10:14 +03:00
},
perf test: Add libbpf relocation checker There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-25 12:55:48 +03:00
[LLVM_TESTCASE_BPF_RELOCATION] = {
.source = test_llvm__bpf_test_relocation,
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Compile source for BPF relocation",
perf test: Add libbpf relocation checker There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-25 12:55:48 +03:00
.should_load_fail = true,
},
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
};
int
test_llvm__fetch_bpf_obj(void **p_obj_buf,
size_t *p_obj_buf_sz,
enum test_llvm__testcase idx,
perf test: Add libbpf relocation checker There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-25 12:55:48 +03:00
bool force,
bool *should_load_fail)
{
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
const char *source;
const char *desc;
const char *tmpl_old, *clang_opt_old;
char *tmpl_new = NULL, *clang_opt_new = NULL;
int err, old_verbose, ret = TEST_FAIL;
if (idx >= __LLVM_TESTCASE_MAX)
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
return TEST_FAIL;
source = bpf_source_table[idx].source;
desc = bpf_source_table[idx].desc;
perf test: Add libbpf relocation checker There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-25 12:55:48 +03:00
if (should_load_fail)
*should_load_fail = bpf_source_table[idx].should_load_fail;
/*
* Skip this test if user's .perfconfig doesn't set [llvm] section
perf tools: Fix LLVM test failure when running in verbose mode A CI system might want to run all tests in verbose mode so that there is enough information to diagnose issues. This LLVM test is the only test that uses "-v" to signify to not skip the test if the preconditions aren't met (LLVM isn't installed). This means that running the test in verbose mode without LLVM installed causes a test failure. For consistency with the other tests, remove this verbose/skip check. An alternate solution would be to make _all_ tests not skip when run in verbose mode, but I don't think that would be intuitive. Also change the search_program() call to search_program_and_warn(). Previously the hint about installing LLVM was only printed by the actual test because this check was skipped in verbose mode. To maintain the old behaviour, the precondition check must also print the full warning. Previous output: $ ./perf test llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : Skip $ ./perf test -v llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : --- start --- test child forked, pid 2085835 ERROR: unable to find clang. Hint: Try to install latest clang/llvm to support BPF. Check your $PATH ... test child finished with -1 ---- end ---- LLVM search and compile subtest 1: FAILED! New output (non verbose mode is identical, verbose changes from fail to skip): $ ./perf test llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : Skip $ ./perf test -v llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : --- start --- test child forked, pid 2087680 ERROR: unable to find clang. Hint: Try to install latest clang/llvm to support BPF. Check your $PATH ... No clang, skip this test test child finished with -2 ---- end ---- LLVM search and compile subtest 1: Skip Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20210831145501.2135754-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-31 17:55:00 +03:00
* and clang is not found in $PATH
*/
perf tools: Fix LLVM test failure when running in verbose mode A CI system might want to run all tests in verbose mode so that there is enough information to diagnose issues. This LLVM test is the only test that uses "-v" to signify to not skip the test if the preconditions aren't met (LLVM isn't installed). This means that running the test in verbose mode without LLVM installed causes a test failure. For consistency with the other tests, remove this verbose/skip check. An alternate solution would be to make _all_ tests not skip when run in verbose mode, but I don't think that would be intuitive. Also change the search_program() call to search_program_and_warn(). Previously the hint about installing LLVM was only printed by the actual test because this check was skipped in verbose mode. To maintain the old behaviour, the precondition check must also print the full warning. Previous output: $ ./perf test llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : Skip $ ./perf test -v llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : --- start --- test child forked, pid 2085835 ERROR: unable to find clang. Hint: Try to install latest clang/llvm to support BPF. Check your $PATH ... test child finished with -1 ---- end ---- LLVM search and compile subtest 1: FAILED! New output (non verbose mode is identical, verbose changes from fail to skip): $ ./perf test llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : Skip $ ./perf test -v llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : --- start --- test child forked, pid 2087680 ERROR: unable to find clang. Hint: Try to install latest clang/llvm to support BPF. Check your $PATH ... No clang, skip this test test child finished with -2 ---- end ---- LLVM search and compile subtest 1: Skip Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20210831145501.2135754-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-31 17:55:00 +03:00
if (!force && (!llvm_param.user_set_param &&
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
llvm__search_clang())) {
perf tools: Fix LLVM test failure when running in verbose mode A CI system might want to run all tests in verbose mode so that there is enough information to diagnose issues. This LLVM test is the only test that uses "-v" to signify to not skip the test if the preconditions aren't met (LLVM isn't installed). This means that running the test in verbose mode without LLVM installed causes a test failure. For consistency with the other tests, remove this verbose/skip check. An alternate solution would be to make _all_ tests not skip when run in verbose mode, but I don't think that would be intuitive. Also change the search_program() call to search_program_and_warn(). Previously the hint about installing LLVM was only printed by the actual test because this check was skipped in verbose mode. To maintain the old behaviour, the precondition check must also print the full warning. Previous output: $ ./perf test llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : Skip $ ./perf test -v llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : --- start --- test child forked, pid 2085835 ERROR: unable to find clang. Hint: Try to install latest clang/llvm to support BPF. Check your $PATH ... test child finished with -1 ---- end ---- LLVM search and compile subtest 1: FAILED! New output (non verbose mode is identical, verbose changes from fail to skip): $ ./perf test llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : Skip $ ./perf test -v llvm 40: LLVM search and compile : 40.1: Basic BPF llvm compile : --- start --- test child forked, pid 2087680 ERROR: unable to find clang. Hint: Try to install latest clang/llvm to support BPF. Check your $PATH ... No clang, skip this test test child finished with -2 ---- end ---- LLVM search and compile subtest 1: Skip Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20210831145501.2135754-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-31 17:55:00 +03:00
pr_debug("No clang, skip this test\n");
return TEST_SKIP;
}
/*
* llvm is verbosity when error. Suppress all error output if
* not 'perf test -v'.
*/
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
old_verbose = verbose;
if (verbose == 0)
verbose = -1;
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
*p_obj_buf = NULL;
*p_obj_buf_sz = 0;
if (!llvm_param.clang_bpf_cmd_template)
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
goto out;
if (!llvm_param.clang_opt)
llvm_param.clang_opt = strdup("");
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
err = asprintf(&tmpl_new, "echo '%s' | %s%s", source,
llvm_param.clang_bpf_cmd_template,
old_verbose ? "" : " 2>/dev/null");
if (err < 0)
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
goto out;
err = asprintf(&clang_opt_new, "-xc %s", llvm_param.clang_opt);
if (err < 0)
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
goto out;
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
tmpl_old = llvm_param.clang_bpf_cmd_template;
llvm_param.clang_bpf_cmd_template = tmpl_new;
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
clang_opt_old = llvm_param.clang_opt;
llvm_param.clang_opt = clang_opt_new;
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
err = llvm__compile_bpf("-", p_obj_buf, p_obj_buf_sz);
llvm_param.clang_bpf_cmd_template = tmpl_old;
llvm_param.clang_opt = clang_opt_old;
verbose = old_verbose;
if (err)
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
goto out;
ret = TEST_OK;
out:
free(tmpl_new);
free(clang_opt_new);
if (ret != TEST_OK)
pr_debug("Failed to compile test case: '%s'\n", desc);
return ret;
}
int test__llvm(struct test *test __maybe_unused, int subtest)
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
{
perf test: Print result for each LLVM subtest Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:48 +03:00
int ret;
void *obj_buf = NULL;
size_t obj_buf_sz = 0;
perf test: Add libbpf relocation checker There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-25 12:55:48 +03:00
bool should_load_fail = false;
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
perf test: Print result for each LLVM subtest Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:48 +03:00
if ((subtest < 0) || (subtest >= __LLVM_TESTCASE_MAX))
return TEST_FAIL;
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
perf test: Print result for each LLVM subtest Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:48 +03:00
ret = test_llvm__fetch_bpf_obj(&obj_buf, &obj_buf_sz,
perf test: Add libbpf relocation checker There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-25 12:55:48 +03:00
subtest, false, &should_load_fail);
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
perf test: Add libbpf relocation checker There's a bug in LLVM that it can generate unneeded relocation information. See [1] and [2]. Libbpf should check the target section of a relocation symbol. This patch adds a testcase which references a global variable (BPF doesn't support global variables). Before fixing libbpf, the new test case can be loaded into kernel, the global variable acts like the first map. It is incorrect. Result: # ~/perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok 37.3: Test BPF relocation checker : FAILED! # ~/perf test -v BPF ... libbpf: loading object '[bpf_relocation_test]' from buffer libbpf: section .strtab, size 126, link 0, flags 0, type=3 libbpf: section .text, size 0, link 0, flags 6, type=1 libbpf: section .data, size 0, link 0, flags 3, type=1 libbpf: section .bss, size 0, link 0, flags 3, type=8 libbpf: section func=sys_write, size 104, link 0, flags 6, type=1 libbpf: found program func=sys_write libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9 libbpf: section maps, size 16, link 0, flags 3, type=1 libbpf: maps in [bpf_relocation_test]: 16 bytes libbpf: section license, size 4, link 0, flags 3, type=1 libbpf: license of [bpf_relocation_test] is GPL libbpf: section version, size 4, link 0, flags 3, type=1 libbpf: kernel version of [bpf_relocation_test] is 40400 libbpf: section .symtab, size 144, link 1, flags 0, type=2 libbpf: map 0 is "my_table" libbpf: collecting relocating info for: 'func=sys_write' libbpf: relocation: insn_idx=7 Success unexpectedly: libbpf error when dealing with relocation test child finished with -1 ---- end ---- Test BPF filter subtest 2: FAILED! [1] https://llvm.org/bugs/show_bug.cgi?id=26243 [2] https://patchwork.ozlabs.org/patch/571385/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-25 12:55:48 +03:00
if (ret == TEST_OK && !should_load_fail) {
perf test: Print result for each LLVM subtest Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:48 +03:00
ret = test__bpf_parsing(obj_buf, obj_buf_sz);
if (ret != TEST_OK) {
pr_debug("Failed to parse test case '%s'\n",
bpf_source_table[subtest].desc);
perf test: Enhance the LLVM test: update basic BPF test program This patch replaces the original toy BPF program with the previously introduced bpf-script-example.c. Dynamically embeddeding it into 'llvm-src-base.c'. The newly introduced BPF program attaches a BPF program to 'sys_epoll_pwait()'. perf itself never use that syscall, so further test can verify their result with it. The program would generate 1 sample in every 2 calls of epoll_pwait() system call. Since the resulting BPF object is useful per se for further tests, test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from source. The LLVM test was rewritten to use it. Committer note: Running it: [root@zoo wb]# perf test -v LLVM 35: Test LLVM searching and compiling : --- start --- test child forked, pid 17740 Kernel build dir is set to /lib/modules/4.3.0-rc1+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40300 set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_epoll_pwait") int bpf_func__sys_epoll_pwait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- Test LLVM searching and compiling: Ok [root@zoo wb]# Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 16:49:41 +03:00
}
}
perf test: Print result for each LLVM subtest Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:48 +03:00
free(obj_buf);
return ret;
}
int test__llvm_subtest_get_nr(void)
{
return __LLVM_TESTCASE_MAX;
}
const char *test__llvm_subtest_get_desc(int subtest)
{
if ((subtest < 0) || (subtest >= __LLVM_TESTCASE_MAX))
return NULL;
return bpf_source_table[subtest].desc;
}
#else //HAVE_LIBBPF_SUPPORT
int test__llvm(struct test *test __maybe_unused, int subtest __maybe_unused)
{
return TEST_SKIP;
}
int test__llvm_subtest_get_nr(void)
{
return 0;
}
const char *test__llvm_subtest_get_desc(int subtest __maybe_unused)
{
return NULL;
}
#endif // HAVE_LIBBPF_SUPPORT