microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/s390/kernel/base.S

145 строки
3.0 KiB
ArmAsm
Исходник Обычный вид История

[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
/*
* arch/s390/kernel/base.S
*
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20 13:15:04 +04:00
* Copyright IBM Corp. 2006, 2007
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
* Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
* Michael Holzheu <holzheu@de.ibm.com>
*/
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
#include <linux/linkage.h>
[S390] Cleanup struct _lowcore usage and defines. Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-27 00:37:43 +03:00
#include <asm/asm-offsets.h>
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
#include <asm/ptrace.h>
s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-04 17:05:43 +04:00
#include <asm/sigp.h>
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(s390_base_mcck_handler)
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
basr %r13,0
0: lg %r15,__LC_PANIC_STACK # load panic stack
aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_mcck_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
jz 1f
basr %r14,%r1
1: la %r1,4095
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
lpswe __LC_MCK_OLD_PSW
.section .bss
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
.align 8
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
.globl s390_base_mcck_handler_fn
s390_base_mcck_handler_fn:
.quad 0
.previous
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(s390_base_ext_handler)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r0,%r15,__LC_SAVE_AREA_ASYNC
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
basr %r13,0
0: aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_ext_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
jz 1f
basr %r14,%r1
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
1: lmg %r0,%r15,__LC_SAVE_AREA_ASYNC
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit
lpswe __LC_EXT_OLD_PSW
.section .bss
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
.align 8
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
.globl s390_base_ext_handler_fn
s390_base_ext_handler_fn:
.quad 0
.previous
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(s390_base_pgm_handler)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r0,%r15,__LC_SAVE_AREA_SYNC
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
basr %r13,0
0: aghi %r15,-STACK_FRAME_OVERHEAD
larl %r1,s390_base_pgm_handler_fn
lg %r1,0(%r1)
ltgr %r1,%r1
jz 1f
basr %r14,%r1
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lmg %r0,%r15,__LC_SAVE_AREA_SYNC
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
lpswe __LC_PGM_OLD_PSW
1: lpswe disabled_wait_psw-0b(%r13)
.align 8
disabled_wait_psw:
.quad 0x0002000180000000,0x0000000000000000 + s390_base_pgm_handler
.section .bss
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
.align 8
[S390] Convert memory detection into C code. Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 23:18:37 +03:00
.globl s390_base_pgm_handler_fn
s390_base_pgm_handler_fn:
.quad 0
.previous
[S390] Use diagnose 308 for system reset The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:22 +04:00
#
# Calls diag 308 subcode 1 and continues execution
#
ENTRY(diag308_reset)
larl %r4,.Lctlregs # Save control registers
stctg %c0,%c15,0(%r4)
s390/kdump: fix nosmt kernel parameter It turned out that SIGP set-multi-threading can only be done once. Therefore switching to a different MT level after switching to sclp.mtid_prev in the dump case fails. As a symptom specifying the "nosmt" parameter currently fails for the kdump kernel and the kernel starts with multi-threading enabled. So fix this and issue diag 308 subcode 1 call after collecting the CPU states for the dump. Also enhance the diag308_reset() function to be usable also with enabled lowcore protection and prefix register != 0. After the reset it is possible to switch the MT level again. We have to do the reset very early in order not to kill the already initialized console. Therefore instead of kmalloc() the corresponding memblock functions have to be used. To avoid copying the sclp cpu code into sclp_early, we now use the simple sigp loop method for CPU detection. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-26 20:05:23 +03:00
lg %r2,0(%r4) # Disable lowcore protection
nilh %r2,0xefff
larl %r4,.Lctlreg0
stg %r2,0(%r4)
lctlg %c0,%c0,0(%r4)
[S390] kdump backend code This patch provides the architecture specific part of the s390 kdump support. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 18:16:40 +04:00
larl %r4,.Lfpctl # Floating point control register
stfpc 0(%r4)
s390/kdump: fix nosmt kernel parameter It turned out that SIGP set-multi-threading can only be done once. Therefore switching to a different MT level after switching to sclp.mtid_prev in the dump case fails. As a symptom specifying the "nosmt" parameter currently fails for the kdump kernel and the kernel starts with multi-threading enabled. So fix this and issue diag 308 subcode 1 call after collecting the CPU states for the dump. Also enhance the diag308_reset() function to be usable also with enabled lowcore protection and prefix register != 0. After the reset it is possible to switch the MT level again. We have to do the reset very early in order not to kill the already initialized console. Therefore instead of kmalloc() the corresponding memblock functions have to be used. To avoid copying the sclp cpu code into sclp_early, we now use the simple sigp loop method for CPU detection. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-26 20:05:23 +03:00
larl %r4,.Lprefix # Save prefix register
stpx 0(%r4)
larl %r4,.Lprefix_zero # Set prefix register to 0
spx 0(%r4)
s390/kdump: Use real mode for PSW restart and kexec Currently the PSW restart handler and kexec are executed in real mode with DAT=off. For kexec/kdump the function setup_regs() is called that uses the per-cpu variable "crash_notes". Because there are situations when the per-cpu implementation uses vmalloc memory, calling setup_regs() in real mode can cause a program check interrupt. To fix that problem this patch changes the following: * Ensure that diag308_reset() does not change PSW bits to real mode * Enable DAT in __do_restart() after we switched to an online CPU * Enable DAT in __machine_kexec() after we switched to the IPL CPU * Call setup_regs() before we switch to real mode and call purgatory Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-21 13:30:30 +04:00
larl %r4,.Lcontinue_psw # Save PSW flags
epsw %r2,%r3
stm %r2,%r3,0(%r4)
[S390] Use diagnose 308 for system reset The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:22 +04:00
larl %r4,.Lrestart_psw # Setup restart PSW at absolute 0
lghi %r3,0
lg %r4,0(%r4) # Save PSW
sturg %r4,%r3 # Use sturg, because of large pages
lghi %r1,1
s390: add SMT support The multi-threading facility is introduced with the z13 processor family. This patch adds code to detect the multi-threading facility. With the facility enabled each core will surface multiple hardware threads to the system. Each hardware threads looks like a normal CPU to the operating system with all its registers and properties. The SCLP interface reports the SMT topology indirectly via the maximum thread id. Each reported CPU in the result of a read-scp-information is a core representing a number of hardware threads. To reflect the reduced CPU capacity if two hardware threads run on a single core the MT utilization counter set is used to normalize the raw cputime obtained by the CPU timer deltas. This scaled cputime is reported via the taskstats interface. The normal /proc/stat numbers are based on the raw cputime and are not affected by the normalization. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-14 19:52:10 +03:00
lghi %r0,0
diag %r0,%r1,0x308
[S390] Use diagnose 308 for system reset The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:22 +04:00
.Lrestart_part2:
lhi %r0,0 # Load r0 with zero
lhi %r1,2 # Use mode 2 = ESAME (dump)
s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-04 17:05:43 +04:00
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to ESAME mode
[S390] Use diagnose 308 for system reset The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:22 +04:00
sam64 # Switch to 64 bit addressing mode
larl %r4,.Lctlregs # Restore control registers
lctlg %c0,%c15,0(%r4)
[S390] kdump backend code This patch provides the architecture specific part of the s390 kdump support. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 18:16:40 +04:00
larl %r4,.Lfpctl # Restore floating point ctl register
lfpc 0(%r4)
s390/kdump: fix nosmt kernel parameter It turned out that SIGP set-multi-threading can only be done once. Therefore switching to a different MT level after switching to sclp.mtid_prev in the dump case fails. As a symptom specifying the "nosmt" parameter currently fails for the kdump kernel and the kernel starts with multi-threading enabled. So fix this and issue diag 308 subcode 1 call after collecting the CPU states for the dump. Also enhance the diag308_reset() function to be usable also with enabled lowcore protection and prefix register != 0. After the reset it is possible to switch the MT level again. We have to do the reset very early in order not to kill the already initialized console. Therefore instead of kmalloc() the corresponding memblock functions have to be used. To avoid copying the sclp cpu code into sclp_early, we now use the simple sigp loop method for CPU detection. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-26 20:05:23 +03:00
larl %r4,.Lprefix # Restore prefix register
spx 0(%r4)
s390/kdump: Use real mode for PSW restart and kexec Currently the PSW restart handler and kexec are executed in real mode with DAT=off. For kexec/kdump the function setup_regs() is called that uses the per-cpu variable "crash_notes". Because there are situations when the per-cpu implementation uses vmalloc memory, calling setup_regs() in real mode can cause a program check interrupt. To fix that problem this patch changes the following: * Ensure that diag308_reset() does not change PSW bits to real mode * Enable DAT in __do_restart() after we switched to an online CPU * Enable DAT in __machine_kexec() after we switched to the IPL CPU * Call setup_regs() before we switch to real mode and call purgatory Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-21 13:30:30 +04:00
larl %r4,.Lcontinue_psw # Restore PSW flags
lpswe 0(%r4)
.Lcontinue:
[S390] Use diagnose 308 for system reset The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:22 +04:00
br %r14
.align 16
.Lrestart_psw:
.long 0x00080000,0x80000000 + .Lrestart_part2
s390/kdump: Use real mode for PSW restart and kexec Currently the PSW restart handler and kexec are executed in real mode with DAT=off. For kexec/kdump the function setup_regs() is called that uses the per-cpu variable "crash_notes". Because there are situations when the per-cpu implementation uses vmalloc memory, calling setup_regs() in real mode can cause a program check interrupt. To fix that problem this patch changes the following: * Ensure that diag308_reset() does not change PSW bits to real mode * Enable DAT in __do_restart() after we switched to an online CPU * Enable DAT in __machine_kexec() after we switched to the IPL CPU * Call setup_regs() before we switch to real mode and call purgatory Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-21 13:30:30 +04:00
.section .data..nosave,"aw",@progbits
.align 8
.Lcontinue_psw:
.quad 0,.Lcontinue
.previous
[S390] Use diagnose 308 for system reset The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:22 +04:00
.section .bss
.align 8
s390/kdump: fix nosmt kernel parameter It turned out that SIGP set-multi-threading can only be done once. Therefore switching to a different MT level after switching to sclp.mtid_prev in the dump case fails. As a symptom specifying the "nosmt" parameter currently fails for the kdump kernel and the kernel starts with multi-threading enabled. So fix this and issue diag 308 subcode 1 call after collecting the CPU states for the dump. Also enhance the diag308_reset() function to be usable also with enabled lowcore protection and prefix register != 0. After the reset it is possible to switch the MT level again. We have to do the reset very early in order not to kill the already initialized console. Therefore instead of kmalloc() the corresponding memblock functions have to be used. To avoid copying the sclp cpu code into sclp_early, we now use the simple sigp loop method for CPU detection. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-26 20:05:23 +03:00
.Lctlreg0:
.quad 0
[S390] Use diagnose 308 for system reset The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:22 +04:00
.Lctlregs:
.rept 16
.quad 0
.endr
[S390] kdump backend code This patch provides the architecture specific part of the s390 kdump support. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 18:16:40 +04:00
.Lfpctl:
.long 0
s390/kdump: fix nosmt kernel parameter It turned out that SIGP set-multi-threading can only be done once. Therefore switching to a different MT level after switching to sclp.mtid_prev in the dump case fails. As a symptom specifying the "nosmt" parameter currently fails for the kdump kernel and the kernel starts with multi-threading enabled. So fix this and issue diag 308 subcode 1 call after collecting the CPU states for the dump. Also enhance the diag308_reset() function to be usable also with enabled lowcore protection and prefix register != 0. After the reset it is possible to switch the MT level again. We have to do the reset very early in order not to kill the already initialized console. Therefore instead of kmalloc() the corresponding memblock functions have to be used. To avoid copying the sclp cpu code into sclp_early, we now use the simple sigp loop method for CPU detection. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-26 20:05:23 +03:00
.Lprefix:
.long 0
.Lprefix_zero:
.long 0
[S390] Use diagnose 308 for system reset The diagnose 308 call is the prefered method for clearing all ongoing I/O. Therefore if it is available we use it instead of doing a manual reset. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:22 +04:00
.previous