WSL2-Linux-Kernel/kernel/trace/trace_selftest.c

1194 строки
26 KiB
C
Исходник Обычный вид История

/* Include in trace.c */
#include <linux/stringify.h>
#include <linux/kthread.h>
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
static inline int trace_valid_entry(struct trace_entry *entry)
{
switch (entry->type) {
case TRACE_FN:
case TRACE_CTX:
case TRACE_WAKE:
case TRACE_STACK:
case TRACE_PRINT:
case TRACE_BRANCH:
case TRACE_GRAPH_ENT:
case TRACE_GRAPH_RET:
return 1;
}
return 0;
}
static int trace_test_buffer_cpu(struct trace_array *tr, int cpu)
{
struct ring_buffer_event *event;
struct trace_entry *entry;
unsigned int loops = 0;
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
while ((event = ring_buffer_consume(tr->buffer, cpu, NULL, NULL))) {
entry = ring_buffer_event_data(event);
/*
* The ring buffer is a size of trace_buf_size, if
* we loop more than the size, there's something wrong
* with the ring buffer.
*/
if (loops++ > trace_buf_size) {
printk(KERN_CONT ".. bad ring buffer ");
goto failed;
}
if (!trace_valid_entry(entry)) {
printk(KERN_CONT ".. invalid entry %d ",
entry->type);
goto failed;
}
}
return 0;
failed:
/* disable tracing */
tracing_disabled = 1;
printk(KERN_CONT ".. corrupted trace buffer .. ");
return -1;
}
/*
* Test the trace buffer to see if all the elements
* are still sane.
*/
static int trace_test_buffer(struct trace_array *tr, unsigned long *count)
{
unsigned long flags, cnt = 0;
int cpu, ret = 0;
/* Don't allow flipping of max traces now */
local_irq_save(flags);
arch_spin_lock(&ftrace_max_lock);
cnt = ring_buffer_entries(tr->buffer);
/*
* The trace_test_buffer_cpu runs a while loop to consume all data.
* If the calling tracer is broken, and is constantly filling
* the buffer, this will run forever, and hard lock the box.
* We disable the ring buffer while we do this test to prevent
* a hard lock up.
*/
tracing_off();
for_each_possible_cpu(cpu) {
ret = trace_test_buffer_cpu(tr, cpu);
if (ret)
break;
}
tracing_on();
arch_spin_unlock(&ftrace_max_lock);
local_irq_restore(flags);
if (count)
*count = cnt;
return ret;
}
static inline void warn_failed_init_tracer(struct tracer *trace, int init_ret)
{
printk(KERN_WARNING "Failed to init %s tracer, init returned %d\n",
trace->name, init_ret);
}
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
static int trace_selftest_test_probe1_cnt;
static void trace_selftest_test_probe1_func(unsigned long ip,
unsigned long pip,
struct ftrace_ops *op,
struct pt_regs *pt_regs)
{
trace_selftest_test_probe1_cnt++;
}
static int trace_selftest_test_probe2_cnt;
static void trace_selftest_test_probe2_func(unsigned long ip,
unsigned long pip,
struct ftrace_ops *op,
struct pt_regs *pt_regs)
{
trace_selftest_test_probe2_cnt++;
}
static int trace_selftest_test_probe3_cnt;
static void trace_selftest_test_probe3_func(unsigned long ip,
unsigned long pip,
struct ftrace_ops *op,
struct pt_regs *pt_regs)
{
trace_selftest_test_probe3_cnt++;
}
static int trace_selftest_test_global_cnt;
static void trace_selftest_test_global_func(unsigned long ip,
unsigned long pip,
struct ftrace_ops *op,
struct pt_regs *pt_regs)
{
trace_selftest_test_global_cnt++;
}
static int trace_selftest_test_dyn_cnt;
static void trace_selftest_test_dyn_func(unsigned long ip,
unsigned long pip,
struct ftrace_ops *op,
struct pt_regs *pt_regs)
{
trace_selftest_test_dyn_cnt++;
}
static struct ftrace_ops test_probe1 = {
.func = trace_selftest_test_probe1_func,
.flags = FTRACE_OPS_FL_RECURSION_SAFE,
};
static struct ftrace_ops test_probe2 = {
.func = trace_selftest_test_probe2_func,
.flags = FTRACE_OPS_FL_RECURSION_SAFE,
};
static struct ftrace_ops test_probe3 = {
.func = trace_selftest_test_probe3_func,
.flags = FTRACE_OPS_FL_RECURSION_SAFE,
};
static struct ftrace_ops test_global = {
.func = trace_selftest_test_global_func,
.flags = FTRACE_OPS_FL_GLOBAL | FTRACE_OPS_FL_RECURSION_SAFE,
};
static void print_counts(void)
{
printk("(%d %d %d %d %d) ",
trace_selftest_test_probe1_cnt,
trace_selftest_test_probe2_cnt,
trace_selftest_test_probe3_cnt,
trace_selftest_test_global_cnt,
trace_selftest_test_dyn_cnt);
}
static void reset_counts(void)
{
trace_selftest_test_probe1_cnt = 0;
trace_selftest_test_probe2_cnt = 0;
trace_selftest_test_probe3_cnt = 0;
trace_selftest_test_global_cnt = 0;
trace_selftest_test_dyn_cnt = 0;
}
static int trace_selftest_ops(int cnt)
{
int save_ftrace_enabled = ftrace_enabled;
struct ftrace_ops *dyn_ops;
char *func1_name;
char *func2_name;
int len1;
int len2;
int ret = -1;
printk(KERN_CONT "PASSED\n");
pr_info("Testing dynamic ftrace ops #%d: ", cnt);
ftrace_enabled = 1;
reset_counts();
/* Handle PPC64 '.' name */
func1_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
func2_name = "*" __stringify(DYN_FTRACE_TEST_NAME2);
len1 = strlen(func1_name);
len2 = strlen(func2_name);
/*
* Probe 1 will trace function 1.
* Probe 2 will trace function 2.
* Probe 3 will trace functions 1 and 2.
*/
ftrace_set_filter(&test_probe1, func1_name, len1, 1);
ftrace_set_filter(&test_probe2, func2_name, len2, 1);
ftrace_set_filter(&test_probe3, func1_name, len1, 1);
ftrace_set_filter(&test_probe3, func2_name, len2, 0);
register_ftrace_function(&test_probe1);
register_ftrace_function(&test_probe2);
register_ftrace_function(&test_probe3);
register_ftrace_function(&test_global);
DYN_FTRACE_TEST_NAME();
print_counts();
if (trace_selftest_test_probe1_cnt != 1)
goto out;
if (trace_selftest_test_probe2_cnt != 0)
goto out;
if (trace_selftest_test_probe3_cnt != 1)
goto out;
if (trace_selftest_test_global_cnt == 0)
goto out;
DYN_FTRACE_TEST_NAME2();
print_counts();
if (trace_selftest_test_probe1_cnt != 1)
goto out;
if (trace_selftest_test_probe2_cnt != 1)
goto out;
if (trace_selftest_test_probe3_cnt != 2)
goto out;
/* Add a dynamic probe */
dyn_ops = kzalloc(sizeof(*dyn_ops), GFP_KERNEL);
if (!dyn_ops) {
printk("MEMORY ERROR ");
goto out;
}
dyn_ops->func = trace_selftest_test_dyn_func;
register_ftrace_function(dyn_ops);
trace_selftest_test_global_cnt = 0;
DYN_FTRACE_TEST_NAME();
print_counts();
if (trace_selftest_test_probe1_cnt != 2)
goto out_free;
if (trace_selftest_test_probe2_cnt != 1)
goto out_free;
if (trace_selftest_test_probe3_cnt != 3)
goto out_free;
if (trace_selftest_test_global_cnt == 0)
goto out;
if (trace_selftest_test_dyn_cnt == 0)
goto out_free;
DYN_FTRACE_TEST_NAME2();
print_counts();
if (trace_selftest_test_probe1_cnt != 2)
goto out_free;
if (trace_selftest_test_probe2_cnt != 2)
goto out_free;
if (trace_selftest_test_probe3_cnt != 4)
goto out_free;
ret = 0;
out_free:
unregister_ftrace_function(dyn_ops);
kfree(dyn_ops);
out:
/* Purposely unregister in the same order */
unregister_ftrace_function(&test_probe1);
unregister_ftrace_function(&test_probe2);
unregister_ftrace_function(&test_probe3);
unregister_ftrace_function(&test_global);
/* Make sure everything is off */
reset_counts();
DYN_FTRACE_TEST_NAME();
DYN_FTRACE_TEST_NAME();
if (trace_selftest_test_probe1_cnt ||
trace_selftest_test_probe2_cnt ||
trace_selftest_test_probe3_cnt ||
trace_selftest_test_global_cnt ||
trace_selftest_test_dyn_cnt)
ret = -1;
ftrace_enabled = save_ftrace_enabled;
return ret;
}
/* Test dynamic code modification and ftrace filters */
int trace_selftest_startup_dynamic_tracing(struct tracer *trace,
struct trace_array *tr,
int (*func)(void))
{
int save_ftrace_enabled = ftrace_enabled;
int save_tracer_enabled = tracer_enabled;
unsigned long count;
char *func_name;
int ret;
/* The ftrace test PASSED */
printk(KERN_CONT "PASSED\n");
pr_info("Testing dynamic ftrace: ");
/* enable tracing, and record the filter function */
ftrace_enabled = 1;
tracer_enabled = 1;
/* passed in by parameter to fool gcc from optimizing */
func();
/*
* Some archs *cough*PowerPC*cough* add characters to the
* start of the function names. We simply put a '*' to
* accommodate them.
*/
func_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
/* filter only on our function */
ftrace_set_global_filter(func_name, strlen(func_name), 1);
/* enable tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
goto out;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* we should have nothing in the buffer */
ret = trace_test_buffer(tr, &count);
if (ret)
goto out;
if (count) {
ret = -1;
printk(KERN_CONT ".. filter did not filter .. ");
goto out;
}
/* call our function again */
func();
/* sleep again */
msleep(100);
/* stop the tracing. */
tracing_stop();
ftrace_enabled = 0;
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
tracing_start();
/* we should only have one item */
if (!ret && count != 1) {
trace->reset(tr);
printk(KERN_CONT ".. filter failed count=%ld ..", count);
ret = -1;
goto out;
}
/* Test the ops with global tracing running */
ret = trace_selftest_ops(1);
trace->reset(tr);
out:
ftrace_enabled = save_ftrace_enabled;
tracer_enabled = save_tracer_enabled;
/* Enable tracing on all functions again */
ftrace_set_global_filter(NULL, 0, 1);
/* Test the ops with global tracing off */
if (!ret)
ret = trace_selftest_ops(2);
return ret;
}
static int trace_selftest_recursion_cnt;
static void trace_selftest_test_recursion_func(unsigned long ip,
unsigned long pip,
struct ftrace_ops *op,
struct pt_regs *pt_regs)
{
/*
* This function is registered without the recursion safe flag.
* The ftrace infrastructure should provide the recursion
* protection. If not, this will crash the kernel!
*/
trace_selftest_recursion_cnt++;
DYN_FTRACE_TEST_NAME();
}
static void trace_selftest_test_recursion_safe_func(unsigned long ip,
unsigned long pip,
struct ftrace_ops *op,
struct pt_regs *pt_regs)
{
/*
* We said we would provide our own recursion. By calling
* this function again, we should recurse back into this function
* and count again. But this only happens if the arch supports
* all of ftrace features and nothing else is using the function
* tracing utility.
*/
if (trace_selftest_recursion_cnt++)
return;
DYN_FTRACE_TEST_NAME();
}
static struct ftrace_ops test_rec_probe = {
.func = trace_selftest_test_recursion_func,
};
static struct ftrace_ops test_recsafe_probe = {
.func = trace_selftest_test_recursion_safe_func,
.flags = FTRACE_OPS_FL_RECURSION_SAFE,
};
static int
trace_selftest_function_recursion(void)
{
int save_ftrace_enabled = ftrace_enabled;
int save_tracer_enabled = tracer_enabled;
char *func_name;
int len;
int ret;
int cnt;
/* The previous test PASSED */
pr_cont("PASSED\n");
pr_info("Testing ftrace recursion: ");
/* enable tracing, and record the filter function */
ftrace_enabled = 1;
tracer_enabled = 1;
/* Handle PPC64 '.' name */
func_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
len = strlen(func_name);
ret = ftrace_set_filter(&test_rec_probe, func_name, len, 1);
if (ret) {
pr_cont("*Could not set filter* ");
goto out;
}
ret = register_ftrace_function(&test_rec_probe);
if (ret) {
pr_cont("*could not register callback* ");
goto out;
}
DYN_FTRACE_TEST_NAME();
unregister_ftrace_function(&test_rec_probe);
ret = -1;
if (trace_selftest_recursion_cnt != 1) {
pr_cont("*callback not called once (%d)* ",
trace_selftest_recursion_cnt);
goto out;
}
trace_selftest_recursion_cnt = 1;
pr_cont("PASSED\n");
pr_info("Testing ftrace recursion safe: ");
ret = ftrace_set_filter(&test_recsafe_probe, func_name, len, 1);
if (ret) {
pr_cont("*Could not set filter* ");
goto out;
}
ret = register_ftrace_function(&test_recsafe_probe);
if (ret) {
pr_cont("*could not register callback* ");
goto out;
}
DYN_FTRACE_TEST_NAME();
unregister_ftrace_function(&test_recsafe_probe);
/*
* If arch supports all ftrace features, and no other task
* was on the list, we should be fine.
*/
if (!ftrace_nr_registered_ops() && !FTRACE_FORCE_LIST_FUNC)
cnt = 2; /* Should have recursed */
else
cnt = 1;
ret = -1;
if (trace_selftest_recursion_cnt != cnt) {
pr_cont("*callback not called expected %d times (%d)* ",
cnt, trace_selftest_recursion_cnt);
goto out;
}
ret = 0;
out:
ftrace_enabled = save_ftrace_enabled;
tracer_enabled = save_tracer_enabled;
return ret;
}
#else
# define trace_selftest_startup_dynamic_tracing(trace, tr, func) ({ 0; })
# define trace_selftest_function_recursion() ({ 0; })
#endif /* CONFIG_DYNAMIC_FTRACE */
static enum {
TRACE_SELFTEST_REGS_START,
TRACE_SELFTEST_REGS_FOUND,
TRACE_SELFTEST_REGS_NOT_FOUND,
} trace_selftest_regs_stat;
static void trace_selftest_test_regs_func(unsigned long ip,
unsigned long pip,
struct ftrace_ops *op,
struct pt_regs *pt_regs)
{
if (pt_regs)
trace_selftest_regs_stat = TRACE_SELFTEST_REGS_FOUND;
else
trace_selftest_regs_stat = TRACE_SELFTEST_REGS_NOT_FOUND;
}
static struct ftrace_ops test_regs_probe = {
.func = trace_selftest_test_regs_func,
.flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_SAVE_REGS,
};
static int
trace_selftest_function_regs(void)
{
int save_ftrace_enabled = ftrace_enabled;
int save_tracer_enabled = tracer_enabled;
char *func_name;
int len;
int ret;
int supported = 0;
#ifdef ARCH_SUPPORTS_FTRACE_SAVE_REGS
supported = 1;
#endif
/* The previous test PASSED */
pr_cont("PASSED\n");
pr_info("Testing ftrace regs%s: ",
!supported ? "(no arch support)" : "");
/* enable tracing, and record the filter function */
ftrace_enabled = 1;
tracer_enabled = 1;
/* Handle PPC64 '.' name */
func_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
len = strlen(func_name);
ret = ftrace_set_filter(&test_regs_probe, func_name, len, 1);
/*
* If DYNAMIC_FTRACE is not set, then we just trace all functions.
* This test really doesn't care.
*/
if (ret && ret != -ENODEV) {
pr_cont("*Could not set filter* ");
goto out;
}
ret = register_ftrace_function(&test_regs_probe);
/*
* Now if the arch does not support passing regs, then this should
* have failed.
*/
if (!supported) {
if (!ret) {
pr_cont("*registered save-regs without arch support* ");
goto out;
}
test_regs_probe.flags |= FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED;
ret = register_ftrace_function(&test_regs_probe);
}
if (ret) {
pr_cont("*could not register callback* ");
goto out;
}
DYN_FTRACE_TEST_NAME();
unregister_ftrace_function(&test_regs_probe);
ret = -1;
switch (trace_selftest_regs_stat) {
case TRACE_SELFTEST_REGS_START:
pr_cont("*callback never called* ");
goto out;
case TRACE_SELFTEST_REGS_FOUND:
if (supported)
break;
pr_cont("*callback received regs without arch support* ");
goto out;
case TRACE_SELFTEST_REGS_NOT_FOUND:
if (!supported)
break;
pr_cont("*callback received NULL regs* ");
goto out;
}
ret = 0;
out:
ftrace_enabled = save_ftrace_enabled;
tracer_enabled = save_tracer_enabled;
return ret;
}
/*
* Simple verification test of ftrace function tracer.
* Enable ftrace, sleep 1/10 second, and then read the trace
* buffer to see if all is in order.
*/
int
trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr)
{
int save_ftrace_enabled = ftrace_enabled;
int save_tracer_enabled = tracer_enabled;
unsigned long count;
int ret;
/* make sure msleep has been recorded */
msleep(1);
/* start the tracing */
ftrace_enabled = 1;
tracer_enabled = 1;
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
goto out;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* stop the tracing. */
tracing_stop();
ftrace_enabled = 0;
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
goto out;
}
ret = trace_selftest_startup_dynamic_tracing(trace, tr,
DYN_FTRACE_TEST_NAME);
if (ret)
goto out;
ret = trace_selftest_function_recursion();
if (ret)
goto out;
ret = trace_selftest_function_regs();
out:
ftrace_enabled = save_ftrace_enabled;
tracer_enabled = save_tracer_enabled;
/* kill ftrace totally if we failed */
if (ret)
ftrace_kill();
return ret;
}
#endif /* CONFIG_FUNCTION_TRACER */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* Maximum number of functions to trace before diagnosing a hang */
#define GRAPH_MAX_FUNC_TEST 100000000
static void
__ftrace_dump(bool disable_tracing, enum ftrace_dump_mode oops_dump_mode);
static unsigned int graph_hang_thresh;
/* Wrap the real function entry probe to avoid possible hanging */
static int trace_graph_entry_watchdog(struct ftrace_graph_ent *trace)
{
/* This is harmlessly racy, we want to approximately detect a hang */
if (unlikely(++graph_hang_thresh > GRAPH_MAX_FUNC_TEST)) {
ftrace_graph_stop();
printk(KERN_WARNING "BUG: Function graph tracer hang!\n");
if (ftrace_dump_on_oops)
__ftrace_dump(false, DUMP_ALL);
return 0;
}
return trace_graph_entry(trace);
}
/*
* Pretty much the same than for the function tracer from which the selftest
* has been borrowed.
*/
int
trace_selftest_startup_function_graph(struct tracer *trace,
struct trace_array *tr)
{
int ret;
unsigned long count;
/*
* Simulate the init() callback but we attach a watchdog callback
* to detect and recover from possible hangs
*/
tracing_reset_online_cpus(tr);
set_graph_array(tr);
ret = register_ftrace_graph(&trace_graph_return,
&trace_graph_entry_watchdog);
if (ret) {
warn_failed_init_tracer(trace, ret);
goto out;
}
tracing_start_cmdline_record();
/* Sleep for a 1/10 of a second */
msleep(100);
/* Have we just recovered from a hang? */
if (graph_hang_thresh > GRAPH_MAX_FUNC_TEST) {
tracing_selftest_disabled = true;
ret = -1;
goto out;
}
tracing_stop();
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
goto out;
}
/* Don't test dynamic tracing, the function tracer already did */
out:
/* Stop it if we failed */
if (ret)
ftrace_graph_stop();
return ret;
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#ifdef CONFIG_IRQSOFF_TRACER
int
trace_selftest_startup_irqsoff(struct tracer *trace, struct trace_array *tr)
{
unsigned long save_max = tracing_max_latency;
unsigned long count;
int ret;
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* reset the max latency */
tracing_max_latency = 0;
/* disable interrupts for a bit */
local_irq_disable();
udelay(100);
local_irq_enable();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 00:38:58 +03:00
/*
* Stop the tracer to avoid a warning subsequent
* to buffer flipping failure because tracing_stop()
* disables the tr and max buffers, making flipping impossible
* in case of parallels max irqs off latencies.
*/
trace->stop(tr);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
if (!ret)
ret = trace_test_buffer(&max_tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
tracing_max_latency = save_max;
return ret;
}
#endif /* CONFIG_IRQSOFF_TRACER */
#ifdef CONFIG_PREEMPT_TRACER
int
trace_selftest_startup_preemptoff(struct tracer *trace, struct trace_array *tr)
{
unsigned long save_max = tracing_max_latency;
unsigned long count;
int ret;
/*
* Now that the big kernel lock is no longer preemptable,
* and this is called with the BKL held, it will always
* fail. If preemption is already disabled, simply
* pass the test. When the BKL is removed, or becomes
* preemptible again, we will once again test this,
* so keep it in.
*/
if (preempt_count()) {
printk(KERN_CONT "can not test ... force ");
return 0;
}
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* reset the max latency */
tracing_max_latency = 0;
/* disable preemption for a bit */
preempt_disable();
udelay(100);
preempt_enable();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 00:38:58 +03:00
/*
* Stop the tracer to avoid a warning subsequent
* to buffer flipping failure because tracing_stop()
* disables the tr and max buffers, making flipping impossible
* in case of parallels max preempt off latencies.
*/
trace->stop(tr);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
if (!ret)
ret = trace_test_buffer(&max_tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
tracing_max_latency = save_max;
return ret;
}
#endif /* CONFIG_PREEMPT_TRACER */
#if defined(CONFIG_IRQSOFF_TRACER) && defined(CONFIG_PREEMPT_TRACER)
int
trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr)
{
unsigned long save_max = tracing_max_latency;
unsigned long count;
int ret;
/*
* Now that the big kernel lock is no longer preemptable,
* and this is called with the BKL held, it will always
* fail. If preemption is already disabled, simply
* pass the test. When the BKL is removed, or becomes
* preemptible again, we will once again test this,
* so keep it in.
*/
if (preempt_count()) {
printk(KERN_CONT "can not test ... force ");
return 0;
}
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 02:32:41 +03:00
goto out_no_start;
}
/* reset the max latency */
tracing_max_latency = 0;
/* disable preemption and interrupts for a bit */
preempt_disable();
local_irq_disable();
udelay(100);
preempt_enable();
/* reverse the order of preempt vs irqs */
local_irq_enable();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 00:38:58 +03:00
/*
* Stop the tracer to avoid a warning subsequent
* to buffer flipping failure because tracing_stop()
* disables the tr and max buffers, making flipping impossible
* in case of parallels max irqs/preempt off latencies.
*/
trace->stop(tr);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 02:32:41 +03:00
if (ret)
goto out;
ret = trace_test_buffer(&max_tr, &count);
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 02:32:41 +03:00
if (ret)
goto out;
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
goto out;
}
/* do the test by disabling interrupts first this time */
tracing_max_latency = 0;
tracing_start();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 00:38:58 +03:00
trace->start(tr);
preempt_disable();
local_irq_disable();
udelay(100);
preempt_enable();
/* reverse the order of preempt vs irqs */
local_irq_enable();
tracing/ftrace: stop {irqs, preempt}soff tracers when tracing is stopped Impact: fix a selftest warning In some cases, it's possible to see the following warning on irqsoff tracer selftest: [ 4.640003] Testing tracer irqsoff: <4>------------[ cut here ]------------ [ 4.653562] WARNING: at kernel/trace/trace.c:458 update_max_tr_single+0x9a/0xc4() [ 4.660000] Hardware name: System Product Name [ 4.660000] Modules linked in: [ 4.660000] Pid: 301, comm: kstop/1 Not tainted 2.6.29-rc8-tip #35837 [ 4.660000] Call Trace: [ 4.660000] [<4014b588>] warn_slowpath+0x79/0x8f [ 4.660000] [<402d6949>] ? put_dec+0x64/0x6b [ 4.660000] [<40162b56>] ? getnstimeofday+0x58/0xdd [ 4.660000] [<40162210>] ? clocksource_read+0x3/0xf [ 4.660000] [<4015eb44>] ? ktime_set+0x8/0x34 [ 4.660000] [<4014101a>] ? balance_runtime+0x8/0x56 [ 4.660000] [<405f6f11>] ? _spin_lock+0x3/0x10 [ 4.660000] [<4011f643>] ? ftrace_call+0x5/0x8 [ 4.660000] [<4015d0f1>] ? task_cputime_zero+0x3/0x27 [ 4.660000] [<40190ee7>] ? cpupri_set+0x90/0xcb [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40190f12>] ? cpupri_set+0xbb/0xcb [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018493f>] ? ring_buffer_reset_cpu+0x27/0x51 [ 4.660000] [<405f7208>] ? _spin_lock_irqsave+0x22/0x34 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<4018cc29>] ? trace_hardirqs_off+0x1a/0x1c [ 4.660000] [<405f7151>] ? _spin_unlock_irqrestore+0x23/0x35 [ 4.660000] [<40184962>] ? ring_buffer_reset_cpu+0x4a/0x51 [ 4.660000] [<401850f3>] ? cpumask_next+0x15/0x18 [ 4.660000] [<4018a41f>] update_max_tr_single+0x9a/0xc4 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cd13>] check_critical_timing+0xcc/0x11e [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4014e5fe>] ? exit_notify+0x16/0xf2 [ 4.660000] [<4018cdf1>] stop_critical_timing+0x8c/0x9f [ 4.660000] [<4014e5c4>] ? forget_original_parent+0xac/0xd0 [ 4.660000] [<4018ce3a>] trace_hardirqs_on+0x1a/0x1c [ 4.660000] [<4014e5c4>] forget_original_parent+0xac/0xd0 [ 4.660000] [<4014e5fe>] exit_notify+0x16/0xf2 [ 4.660000] [<4014e8a5>] do_exit+0x1cb/0x225 [ 4.660000] [<4015c72b>] ? kthread+0x0/0x69 [ 4.660000] [<4011f61d>] kernel_thread_helper+0xd/0x10 [ 4.660000] ---[ end trace a7919e7f17c0a725 ]--- [ 4.660164] .. no entries found ..FAILED! During the selftest of irqsoff tracer, we do that: /* disable interrupts for a bit */ local_irq_disable(); udelay(100); local_irq_enable(); /* stop the tracing. */ tracing_stop(); /* check both trace buffers */ ret = trace_test_buffer(tr, NULL); If a callsite performs a new max delay with irqs off just after tracing_stop, update_max_tr_single() -> ring_buffer_swap_cpu() will be called with the buffers disabled by tracing_stop(), hence the warning, then ring_buffer_swap_cpu() return -EAGAIN and update_max_tr_single() complains. Fix it by also stopping the tracer before stopping the tracing globally. A similar situation can happen with preemptoff and preemptirqsoff tracers where we apply the same fix. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237325938-5240-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 00:38:58 +03:00
trace->stop(tr);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
if (ret)
goto out;
ret = trace_test_buffer(&max_tr, &count);
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
goto out;
}
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 02:32:41 +03:00
out:
tracing_start();
tracing/ftrace: fix double calls to tracing_start() Impact: fix a warning during preemptirqsoff selftests When the preemptirqsoff selftest fails, we see the following warning: [ 6.050000] Testing tracer preemptirqsoff: .. no entries found .. ------------[ cut here ]------------ [ 6.060000] WARNING: at kernel/trace/trace.c:688 tracing_start+0x67/0xd3() [ 6.060000] Modules linked in: [ 6.060000] Pid: 1, comm: swapper Tainted: G [ 6.060000] Call Trace: [ 6.060000] [<ffffffff802460ff>] warn_slowpath+0xb1/0x100 [ 6.060000] [<ffffffff802a8f5b>] ? trace_preempt_on+0x35/0x4b [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff80271e0b>] ? __lock_acquired+0xe6/0x1f2 [ 6.060000] [<ffffffff802a37fb>] ? tracing_start+0x31/0xd3 [ 6.060000] [<ffffffff802a3831>] tracing_start+0x67/0xd3 [ 6.060000] [<ffffffff802a8ace>] ? irqsoff_tracer_reset+0x2d/0x57 [ 6.060000] [<ffffffff802a4d1c>] trace_selftest_startup_preemptirqsoff+0x1c8/0x1f1 [ 6.060000] [<ffffffff802a4798>] register_tracer+0x12f/0x241 [ 6.060000] [<ffffffff810250d0>] ? init_irqsoff_tracer+0x0/0x53 [ 6.060000] [<ffffffff8102510b>] init_irqsoff_tracer+0x3b/0x53 This is because in fail case, the preemptirqsoff tracer selftest calls twice the tracing_start() function: int trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) { if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; tracing_start(); <----- goto out; } [...] out: trace->reset(tr); tracing_start(); <------ tracing_max_latency = save_max; return ret; } Since it is well handled in the out path, we don't need the conditional one. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237159961-7447-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 02:32:41 +03:00
out_no_start:
trace->reset(tr);
tracing_max_latency = save_max;
return ret;
}
#endif /* CONFIG_IRQSOFF_TRACER && CONFIG_PREEMPT_TRACER */
#ifdef CONFIG_NOP_TRACER
int
trace_selftest_startup_nop(struct tracer *trace, struct trace_array *tr)
{
/* What could possibly go wrong? */
return 0;
}
#endif
#ifdef CONFIG_SCHED_TRACER
static int trace_wakeup_test_thread(void *data)
{
/* Make this a RT thread, doesn't need to be too high */
static const struct sched_param param = { .sched_priority = 5 };
struct completion *x = data;
sched_setscheduler(current, SCHED_FIFO, &param);
/* Make it know we have a new prio */
complete(x);
/* now go to sleep and let the test wake us up */
set_current_state(TASK_INTERRUPTIBLE);
schedule();
complete(x);
/* we are awake, now wait to disappear */
while (!kthread_should_stop()) {
/*
* This is an RT task, do short sleeps to let
* others run.
*/
msleep(100);
}
return 0;
}
int
trace_selftest_startup_wakeup(struct tracer *trace, struct trace_array *tr)
{
unsigned long save_max = tracing_max_latency;
struct task_struct *p;
struct completion isrt;
unsigned long count;
int ret;
init_completion(&isrt);
/* create a high prio thread */
p = kthread_run(trace_wakeup_test_thread, &isrt, "ftrace-test");
if (IS_ERR(p)) {
printk(KERN_CONT "Failed to create ftrace wakeup test thread ");
return -1;
}
/* make sure the thread is running at an RT prio */
wait_for_completion(&isrt);
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* reset the max latency */
tracing_max_latency = 0;
while (p->on_rq) {
/*
* Sleep to make sure the RT thread is asleep too.
* On virtual machines we can't rely on timings,
* but we want to make sure this test still works.
*/
msleep(100);
}
init_completion(&isrt);
wake_up_process(p);
/* Wait for the task to wake up */
wait_for_completion(&isrt);
/* stop the tracing. */
tracing_stop();
/* check both trace buffers */
ret = trace_test_buffer(tr, NULL);
if (!ret)
ret = trace_test_buffer(&max_tr, &count);
trace->reset(tr);
tracing_start();
tracing_max_latency = save_max;
/* kill the thread */
kthread_stop(p);
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
return ret;
}
#endif /* CONFIG_SCHED_TRACER */
#ifdef CONFIG_CONTEXT_SWITCH_TRACER
int
trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr)
{
unsigned long count;
int ret;
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* stop the tracing. */
tracing_stop();
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
return ret;
}
#endif /* CONFIG_CONTEXT_SWITCH_TRACER */
#ifdef CONFIG_BRANCH_TRACER
int
trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr)
{
unsigned long count;
int ret;
/* start the tracing */
ret = tracer_init(trace, tr);
if (ret) {
warn_failed_init_tracer(trace, ret);
return ret;
}
/* Sleep for a 1/10 of a second */
msleep(100);
/* stop the tracing. */
tracing_stop();
/* check the trace buffer */
ret = trace_test_buffer(tr, &count);
trace->reset(tr);
tracing_start();
if (!ret && !count) {
printk(KERN_CONT ".. no entries found ..");
ret = -1;
}
return ret;
}
#endif /* CONFIG_BRANCH_TRACER */