WSL2-Linux-Kernel/block/blk-cgroup.h

366 строки
9.9 KiB
C
Исходник Обычный вид История

#ifndef _BLK_CGROUP_H
#define _BLK_CGROUP_H
/*
* Common Block IO controller cgroup interface
*
* Based on ideas and code from CFQ, CFS and BFQ:
* Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
*
* Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
* Paolo Valente <paolo.valente@unimore.it>
*
* Copyright (C) 2009 Vivek Goyal <vgoyal@redhat.com>
* Nauman Rafique <nauman@google.com>
*/
#include <linux/cgroup.h>
#include <linux/u64_stats_sync.h>
#include <linux/seq_file.h>
/* Max limits for throttle policy */
#define THROTL_IOPS_MAX UINT_MAX
/* CFQ specific, out here for blkcg->cfq_weight */
#define CFQ_WEIGHT_MIN 10
#define CFQ_WEIGHT_MAX 1000
#define CFQ_WEIGHT_DEFAULT 500
#ifdef CONFIG_BLK_CGROUP
blkcg: introduce blkg_stat and blkg_rwstat blkcg uses u64_stats_sync to avoid reading wrong u64 statistic values on 32bit archs and some stat counters have subtypes to distinguish read/writes and sync/async IOs. The stat code paths are confusing and involve a lot of going back and forth between blkcg core and specific policy implementations, and synchronization and subtype handling are open coded in blkcg core. This patch introduces struct blkg_stat and blkg_rwstat which, with accompanying operations, encapsulate stat updating and accessing with proper synchronization. blkg_stat is simple u64 counter with 64bit read-access protection. blkg_rwstat is the one with rw and [a]sync subcounters and takes @rw flags to distinguish IO subtypes (%REQ_WRITE and %REQ_SYNC) and replaces stat_sub_type indexed arrays. All counters in blkio_group_stats and blkio_group_stats_cpu are replaced with either blkg_stat or blkg_rwstat along with all users. This does add one u64_stats_sync per counter and increase stats_sync operations but they're empty/noops on 64bit archs and blkcg doesn't have too many counters, especially with DEBUG_BLK_CGROUP off. While the currently resulting code isn't necessarily simpler at the moment, this will enable further clean up of blkcg stats code. - BLKIO_STAT_{READ|WRITE|SYNC|ASYNC|TOTAL} renamed to BLKG_RWSTAT_{READ|WRITE|SYNC|ASYNC|TOTAL}. - blkg_stat_add() replaces blkio_add_stat() and blkio_check_and_dec_stat(). Note that BUG_ON() on underflow in the latter function no longer exists. It's *way* better to have underflowed stat counters than oopsing. - blkio_group_stats->dequeue is now a proper u64 stat counter instead of ulong. - reset_stats() updated to clear each stat counters individually and BLKG_STATS_DEBUG_CLEAR_{START|SIZE} are removed. - Some functions reconstruct rw flags from direction and sync booleans. This will be removed by future patches. Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-02 01:38:42 +04:00
enum blkg_rwstat_type {
BLKG_RWSTAT_READ,
BLKG_RWSTAT_WRITE,
BLKG_RWSTAT_SYNC,
BLKG_RWSTAT_ASYNC,
BLKG_RWSTAT_NR,
BLKG_RWSTAT_TOTAL = BLKG_RWSTAT_NR,
};
struct blkio_cgroup {
struct cgroup_subsys_state css;
spinlock_t lock;
struct hlist_head blkg_list;
/* for policies to test whether associated blkcg has changed */
uint64_t id;
/* TODO: per-policy storage in blkio_cgroup */
unsigned int cfq_weight; /* belongs to cfq */
};
blkcg: introduce blkg_stat and blkg_rwstat blkcg uses u64_stats_sync to avoid reading wrong u64 statistic values on 32bit archs and some stat counters have subtypes to distinguish read/writes and sync/async IOs. The stat code paths are confusing and involve a lot of going back and forth between blkcg core and specific policy implementations, and synchronization and subtype handling are open coded in blkcg core. This patch introduces struct blkg_stat and blkg_rwstat which, with accompanying operations, encapsulate stat updating and accessing with proper synchronization. blkg_stat is simple u64 counter with 64bit read-access protection. blkg_rwstat is the one with rw and [a]sync subcounters and takes @rw flags to distinguish IO subtypes (%REQ_WRITE and %REQ_SYNC) and replaces stat_sub_type indexed arrays. All counters in blkio_group_stats and blkio_group_stats_cpu are replaced with either blkg_stat or blkg_rwstat along with all users. This does add one u64_stats_sync per counter and increase stats_sync operations but they're empty/noops on 64bit archs and blkcg doesn't have too many counters, especially with DEBUG_BLK_CGROUP off. While the currently resulting code isn't necessarily simpler at the moment, this will enable further clean up of blkcg stats code. - BLKIO_STAT_{READ|WRITE|SYNC|ASYNC|TOTAL} renamed to BLKG_RWSTAT_{READ|WRITE|SYNC|ASYNC|TOTAL}. - blkg_stat_add() replaces blkio_add_stat() and blkio_check_and_dec_stat(). Note that BUG_ON() on underflow in the latter function no longer exists. It's *way* better to have underflowed stat counters than oopsing. - blkio_group_stats->dequeue is now a proper u64 stat counter instead of ulong. - reset_stats() updated to clear each stat counters individually and BLKG_STATS_DEBUG_CLEAR_{START|SIZE} are removed. - Some functions reconstruct rw flags from direction and sync booleans. This will be removed by future patches. Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-02 01:38:42 +04:00
struct blkg_stat {
struct u64_stats_sync syncp;
uint64_t cnt;
};
struct blkg_rwstat {
struct u64_stats_sync syncp;
uint64_t cnt[BLKG_RWSTAT_NR];
};
/* per-blkg per-policy data */
struct blkg_policy_data {
/* the blkg this per-policy data belongs to */
struct blkio_group *blkg;
/* used during policy activation */
struct list_head alloc_node;
/* pol->pdata_size bytes of private data used by policy impl */
char pdata[] __aligned(__alignof__(unsigned long long));
};
struct blkio_group {
/* Pointer to the associated request_queue */
struct request_queue *q;
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 01:15:20 +04:00
struct list_head q_node;
struct hlist_node blkcg_node;
struct blkio_cgroup *blkcg;
/* Store cgroup path */
char path[128];
/* reference count */
int refcnt;
struct blkg_policy_data *pd[BLKCG_MAX_POLS];
struct rcu_head rcu_head;
};
typedef void (blkio_init_group_fn)(struct blkio_group *blkg);
typedef void (blkio_exit_group_fn)(struct blkio_group *blkg);
typedef void (blkio_reset_group_stats_fn)(struct blkio_group *blkg);
struct blkio_policy_ops {
blkio_init_group_fn *blkio_init_group_fn;
blkio_exit_group_fn *blkio_exit_group_fn;
blkio_reset_group_stats_fn *blkio_reset_group_stats_fn;
};
struct blkio_policy_type {
struct blkio_policy_ops ops;
int plid;
size_t pdata_size; /* policy specific private data size */
struct cftype *cftypes; /* cgroup files for the policy */
};
extern int blkcg_init_queue(struct request_queue *q);
extern void blkcg_drain_queue(struct request_queue *q);
extern void blkcg_exit_queue(struct request_queue *q);
/* Blkio controller policy registration */
extern int blkio_policy_register(struct blkio_policy_type *);
extern void blkio_policy_unregister(struct blkio_policy_type *);
extern int blkcg_activate_policy(struct request_queue *q,
const struct blkio_policy_type *pol);
extern void blkcg_deactivate_policy(struct request_queue *q,
const struct blkio_policy_type *pol);
void blkcg_print_blkgs(struct seq_file *sf, struct blkio_cgroup *blkcg,
u64 (*prfill)(struct seq_file *, void *, int),
const struct blkio_policy_type *pol, int data,
bool show_total);
u64 __blkg_prfill_u64(struct seq_file *sf, void *pdata, u64 v);
u64 __blkg_prfill_rwstat(struct seq_file *sf, void *pdata,
const struct blkg_rwstat *rwstat);
u64 blkg_prfill_stat(struct seq_file *sf, void *pdata, int off);
u64 blkg_prfill_rwstat(struct seq_file *sf, void *pdata, int off);
struct blkg_conf_ctx {
struct gendisk *disk;
struct blkio_group *blkg;
u64 v;
};
int blkg_conf_prep(struct blkio_cgroup *blkcg,
const struct blkio_policy_type *pol, const char *input,
struct blkg_conf_ctx *ctx);
void blkg_conf_finish(struct blkg_conf_ctx *ctx);
/**
* blkg_to_pdata - get policy private data
* @blkg: blkg of interest
* @pol: policy of interest
*
* Return pointer to private data associated with the @blkg-@pol pair.
*/
static inline void *blkg_to_pdata(struct blkio_group *blkg,
struct blkio_policy_type *pol)
{
return blkg ? blkg->pd[pol->plid]->pdata : NULL;
}
/**
* pdata_to_blkg - get blkg associated with policy private data
* @pdata: policy private data of interest
*
* @pdata is policy private data. Determine the blkg it's associated with.
*/
static inline struct blkio_group *pdata_to_blkg(void *pdata)
{
if (pdata) {
struct blkg_policy_data *pd =
container_of(pdata, struct blkg_policy_data, pdata);
return pd->blkg;
}
return NULL;
}
static inline char *blkg_path(struct blkio_group *blkg)
{
return blkg->path;
}
/**
* blkg_get - get a blkg reference
* @blkg: blkg to get
*
* The caller should be holding queue_lock and an existing reference.
*/
static inline void blkg_get(struct blkio_group *blkg)
{
lockdep_assert_held(blkg->q->queue_lock);
WARN_ON_ONCE(!blkg->refcnt);
blkg->refcnt++;
}
void __blkg_release(struct blkio_group *blkg);
/**
* blkg_put - put a blkg reference
* @blkg: blkg to put
*
* The caller should be holding queue_lock.
*/
static inline void blkg_put(struct blkio_group *blkg)
{
lockdep_assert_held(blkg->q->queue_lock);
WARN_ON_ONCE(blkg->refcnt <= 0);
if (!--blkg->refcnt)
__blkg_release(blkg);
}
blkcg: introduce blkg_stat and blkg_rwstat blkcg uses u64_stats_sync to avoid reading wrong u64 statistic values on 32bit archs and some stat counters have subtypes to distinguish read/writes and sync/async IOs. The stat code paths are confusing and involve a lot of going back and forth between blkcg core and specific policy implementations, and synchronization and subtype handling are open coded in blkcg core. This patch introduces struct blkg_stat and blkg_rwstat which, with accompanying operations, encapsulate stat updating and accessing with proper synchronization. blkg_stat is simple u64 counter with 64bit read-access protection. blkg_rwstat is the one with rw and [a]sync subcounters and takes @rw flags to distinguish IO subtypes (%REQ_WRITE and %REQ_SYNC) and replaces stat_sub_type indexed arrays. All counters in blkio_group_stats and blkio_group_stats_cpu are replaced with either blkg_stat or blkg_rwstat along with all users. This does add one u64_stats_sync per counter and increase stats_sync operations but they're empty/noops on 64bit archs and blkcg doesn't have too many counters, especially with DEBUG_BLK_CGROUP off. While the currently resulting code isn't necessarily simpler at the moment, this will enable further clean up of blkcg stats code. - BLKIO_STAT_{READ|WRITE|SYNC|ASYNC|TOTAL} renamed to BLKG_RWSTAT_{READ|WRITE|SYNC|ASYNC|TOTAL}. - blkg_stat_add() replaces blkio_add_stat() and blkio_check_and_dec_stat(). Note that BUG_ON() on underflow in the latter function no longer exists. It's *way* better to have underflowed stat counters than oopsing. - blkio_group_stats->dequeue is now a proper u64 stat counter instead of ulong. - reset_stats() updated to clear each stat counters individually and BLKG_STATS_DEBUG_CLEAR_{START|SIZE} are removed. - Some functions reconstruct rw flags from direction and sync booleans. This will be removed by future patches. Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-02 01:38:42 +04:00
/**
* blkg_stat_add - add a value to a blkg_stat
* @stat: target blkg_stat
* @val: value to add
*
* Add @val to @stat. The caller is responsible for synchronizing calls to
* this function.
*/
static inline void blkg_stat_add(struct blkg_stat *stat, uint64_t val)
{
u64_stats_update_begin(&stat->syncp);
stat->cnt += val;
u64_stats_update_end(&stat->syncp);
}
/**
* blkg_stat_read - read the current value of a blkg_stat
* @stat: blkg_stat to read
*
* Read the current value of @stat. This function can be called without
* synchroniztion and takes care of u64 atomicity.
*/
static inline uint64_t blkg_stat_read(struct blkg_stat *stat)
{
unsigned int start;
uint64_t v;
do {
start = u64_stats_fetch_begin(&stat->syncp);
v = stat->cnt;
} while (u64_stats_fetch_retry(&stat->syncp, start));
return v;
}
/**
* blkg_stat_reset - reset a blkg_stat
* @stat: blkg_stat to reset
*/
static inline void blkg_stat_reset(struct blkg_stat *stat)
{
stat->cnt = 0;
}
/**
* blkg_rwstat_add - add a value to a blkg_rwstat
* @rwstat: target blkg_rwstat
* @rw: mask of REQ_{WRITE|SYNC}
* @val: value to add
*
* Add @val to @rwstat. The counters are chosen according to @rw. The
* caller is responsible for synchronizing calls to this function.
*/
static inline void blkg_rwstat_add(struct blkg_rwstat *rwstat,
int rw, uint64_t val)
{
u64_stats_update_begin(&rwstat->syncp);
if (rw & REQ_WRITE)
rwstat->cnt[BLKG_RWSTAT_WRITE] += val;
else
rwstat->cnt[BLKG_RWSTAT_READ] += val;
if (rw & REQ_SYNC)
rwstat->cnt[BLKG_RWSTAT_SYNC] += val;
else
rwstat->cnt[BLKG_RWSTAT_ASYNC] += val;
u64_stats_update_end(&rwstat->syncp);
}
/**
* blkg_rwstat_read - read the current values of a blkg_rwstat
* @rwstat: blkg_rwstat to read
*
* Read the current snapshot of @rwstat and return it as the return value.
* This function can be called without synchronization and takes care of
* u64 atomicity.
*/
static inline struct blkg_rwstat blkg_rwstat_read(struct blkg_rwstat *rwstat)
blkcg: introduce blkg_stat and blkg_rwstat blkcg uses u64_stats_sync to avoid reading wrong u64 statistic values on 32bit archs and some stat counters have subtypes to distinguish read/writes and sync/async IOs. The stat code paths are confusing and involve a lot of going back and forth between blkcg core and specific policy implementations, and synchronization and subtype handling are open coded in blkcg core. This patch introduces struct blkg_stat and blkg_rwstat which, with accompanying operations, encapsulate stat updating and accessing with proper synchronization. blkg_stat is simple u64 counter with 64bit read-access protection. blkg_rwstat is the one with rw and [a]sync subcounters and takes @rw flags to distinguish IO subtypes (%REQ_WRITE and %REQ_SYNC) and replaces stat_sub_type indexed arrays. All counters in blkio_group_stats and blkio_group_stats_cpu are replaced with either blkg_stat or blkg_rwstat along with all users. This does add one u64_stats_sync per counter and increase stats_sync operations but they're empty/noops on 64bit archs and blkcg doesn't have too many counters, especially with DEBUG_BLK_CGROUP off. While the currently resulting code isn't necessarily simpler at the moment, this will enable further clean up of blkcg stats code. - BLKIO_STAT_{READ|WRITE|SYNC|ASYNC|TOTAL} renamed to BLKG_RWSTAT_{READ|WRITE|SYNC|ASYNC|TOTAL}. - blkg_stat_add() replaces blkio_add_stat() and blkio_check_and_dec_stat(). Note that BUG_ON() on underflow in the latter function no longer exists. It's *way* better to have underflowed stat counters than oopsing. - blkio_group_stats->dequeue is now a proper u64 stat counter instead of ulong. - reset_stats() updated to clear each stat counters individually and BLKG_STATS_DEBUG_CLEAR_{START|SIZE} are removed. - Some functions reconstruct rw flags from direction and sync booleans. This will be removed by future patches. Signed-off-by: Tejun Heo <tj@kernel.org>
2012-04-02 01:38:42 +04:00
{
unsigned int start;
struct blkg_rwstat tmp;
do {
start = u64_stats_fetch_begin(&rwstat->syncp);
tmp = *rwstat;
} while (u64_stats_fetch_retry(&rwstat->syncp, start));
return tmp;
}
/**
* blkg_rwstat_sum - read the total count of a blkg_rwstat
* @rwstat: blkg_rwstat to read
*
* Return the total count of @rwstat regardless of the IO direction. This
* function can be called without synchronization and takes care of u64
* atomicity.
*/
static inline uint64_t blkg_rwstat_sum(struct blkg_rwstat *rwstat)
{
struct blkg_rwstat tmp = blkg_rwstat_read(rwstat);
return tmp.cnt[BLKG_RWSTAT_READ] + tmp.cnt[BLKG_RWSTAT_WRITE];
}
/**
* blkg_rwstat_reset - reset a blkg_rwstat
* @rwstat: blkg_rwstat to reset
*/
static inline void blkg_rwstat_reset(struct blkg_rwstat *rwstat)
{
memset(rwstat->cnt, 0, sizeof(rwstat->cnt));
}
#else
struct blkio_group {
};
struct blkio_policy_type {
};
static inline int blkcg_init_queue(struct request_queue *q) { return 0; }
static inline void blkcg_drain_queue(struct request_queue *q) { }
static inline void blkcg_exit_queue(struct request_queue *q) { }
static inline int blkio_policy_register(struct blkio_policy_type *blkiop) { return 0; }
static inline void blkio_policy_unregister(struct blkio_policy_type *blkiop) { }
static inline int blkcg_activate_policy(struct request_queue *q,
const struct blkio_policy_type *pol) { return 0; }
static inline void blkcg_deactivate_policy(struct request_queue *q,
const struct blkio_policy_type *pol) { }
static inline void *blkg_to_pdata(struct blkio_group *blkg,
struct blkio_policy_type *pol) { return NULL; }
static inline struct blkio_group *pdata_to_blkg(void *pdata,
struct blkio_policy_type *pol) { return NULL; }
static inline char *blkg_path(struct blkio_group *blkg) { return NULL; }
static inline void blkg_get(struct blkio_group *blkg) { }
static inline void blkg_put(struct blkio_group *blkg) { }
#endif
#ifdef CONFIG_BLK_CGROUP
extern struct blkio_cgroup blkio_root_cgroup;
extern struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup);
extern struct blkio_cgroup *bio_blkio_cgroup(struct bio *bio);
blkcg: factor out blkio_group creation Currently both blk-throttle and cfq-iosched implement their own blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This patch factors out the common code into blkg_lookup_create(), which returns ERR_PTR value so that transitional failures due to queue bypass can be distinguished from other failures. * New plkio_policy_ops methods blkio_alloc_group_fn() and blkio_link_group_fn added. Both are transitional and will be removed once the blkg management code is fully moved into blk-cgroup.c. * blkio_alloc_group_fn() allocates policy-specific blkg which is usually a larger data structure with blkg as the first entry and intiailizes it. Note that initialization of blkg proper, including percpu stats, is responsibility of blk-cgroup proper. Note that default config (weight, bps...) initialization is done from this method; otherwise, we end up violating locking order between blkcg and q locks via blkcg_get_CONF() functions. * blkio_link_group_fn() is called under queue_lock and responsible for linking the blkg to the queue. blkcg side is handled by blk-cgroup proper. * The common blkg creation function is named blkg_lookup_create() and blkiocg_lookup_group() is renamed to blkg_lookup() for consistency. Also, throtl / cfq related functions are similarly [re]named for consistency. This simplifies blkcg policy implementations and enables further cleanup. -v2: Vivek noticed that blkg_lookup_create() incorrectly tested blk_queue_dead() instead of blk_queue_bypass() leading a user of the function ending up creating a new blkg on bypassing queue. This is a bug introduced while relocating bypass patches before this one. Fixed. -v3: ERR_PTR patch folded into this one. @for_root added to blkg_lookup_create() to allow creating root group on a bypassed queue during elevator switch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 01:15:06 +04:00
extern struct blkio_group *blkg_lookup(struct blkio_cgroup *blkcg,
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 01:15:20 +04:00
struct request_queue *q);
blkcg: factor out blkio_group creation Currently both blk-throttle and cfq-iosched implement their own blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This patch factors out the common code into blkg_lookup_create(), which returns ERR_PTR value so that transitional failures due to queue bypass can be distinguished from other failures. * New plkio_policy_ops methods blkio_alloc_group_fn() and blkio_link_group_fn added. Both are transitional and will be removed once the blkg management code is fully moved into blk-cgroup.c. * blkio_alloc_group_fn() allocates policy-specific blkg which is usually a larger data structure with blkg as the first entry and intiailizes it. Note that initialization of blkg proper, including percpu stats, is responsibility of blk-cgroup proper. Note that default config (weight, bps...) initialization is done from this method; otherwise, we end up violating locking order between blkcg and q locks via blkcg_get_CONF() functions. * blkio_link_group_fn() is called under queue_lock and responsible for linking the blkg to the queue. blkcg side is handled by blk-cgroup proper. * The common blkg creation function is named blkg_lookup_create() and blkiocg_lookup_group() is renamed to blkg_lookup() for consistency. Also, throtl / cfq related functions are similarly [re]named for consistency. This simplifies blkcg policy implementations and enables further cleanup. -v2: Vivek noticed that blkg_lookup_create() incorrectly tested blk_queue_dead() instead of blk_queue_bypass() leading a user of the function ending up creating a new blkg on bypassing queue. This is a bug introduced while relocating bypass patches before this one. Fixed. -v3: ERR_PTR patch folded into this one. @for_root added to blkg_lookup_create() to allow creating root group on a bypassed queue during elevator switch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 01:15:06 +04:00
struct blkio_group *blkg_lookup_create(struct blkio_cgroup *blkcg,
struct request_queue *q);
#else
struct cgroup;
static inline struct blkio_cgroup *
cgroup_to_blkio_cgroup(struct cgroup *cgroup) { return NULL; }
static inline struct blkio_cgroup *
bio_blkio_cgroup(struct bio *bio) { return NULL; }
blkcg: factor out blkio_group creation Currently both blk-throttle and cfq-iosched implement their own blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This patch factors out the common code into blkg_lookup_create(), which returns ERR_PTR value so that transitional failures due to queue bypass can be distinguished from other failures. * New plkio_policy_ops methods blkio_alloc_group_fn() and blkio_link_group_fn added. Both are transitional and will be removed once the blkg management code is fully moved into blk-cgroup.c. * blkio_alloc_group_fn() allocates policy-specific blkg which is usually a larger data structure with blkg as the first entry and intiailizes it. Note that initialization of blkg proper, including percpu stats, is responsibility of blk-cgroup proper. Note that default config (weight, bps...) initialization is done from this method; otherwise, we end up violating locking order between blkcg and q locks via blkcg_get_CONF() functions. * blkio_link_group_fn() is called under queue_lock and responsible for linking the blkg to the queue. blkcg side is handled by blk-cgroup proper. * The common blkg creation function is named blkg_lookup_create() and blkiocg_lookup_group() is renamed to blkg_lookup() for consistency. Also, throtl / cfq related functions are similarly [re]named for consistency. This simplifies blkcg policy implementations and enables further cleanup. -v2: Vivek noticed that blkg_lookup_create() incorrectly tested blk_queue_dead() instead of blk_queue_bypass() leading a user of the function ending up creating a new blkg on bypassing queue. This is a bug introduced while relocating bypass patches before this one. Fixed. -v3: ERR_PTR patch folded into this one. @for_root added to blkg_lookup_create() to allow creating root group on a bypassed queue during elevator switch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 01:15:06 +04:00
static inline struct blkio_group *blkg_lookup(struct blkio_cgroup *blkcg,
void *key) { return NULL; }
#endif
#endif /* _BLK_CGROUP_H */