WSL2-Linux-Kernel/include/keys/system_keyring.h

98 строки
2.5 KiB
C
Исходник Обычный вид История

/* SPDX-License-Identifier: GPL-2.0-or-later */
/* System keyring containing trusted public keys.
*
* Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*/
#ifndef _KEYS_SYSTEM_KEYRING_H
#define _KEYS_SYSTEM_KEYRING_H
KEYS: Move the point of trust determination to __key_link() Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 18:14:26 +03:00
#include <linux/key.h>
#ifdef CONFIG_SYSTEM_TRUSTED_KEYRING
KEYS: Move the point of trust determination to __key_link() Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 18:14:26 +03:00
extern int restrict_link_by_builtin_trusted(struct key *keyring,
const struct key_type *type,
const union key_payload *payload,
struct key *restriction_key);
extern __init int load_module_cert(struct key *keyring);
#else
KEYS: Move the point of trust determination to __key_link() Move the point at which a key is determined to be trustworthy to __key_link() so that we use the contents of the keyring being linked in to to determine whether the key being linked in is trusted or not. What is 'trusted' then becomes a matter of what's in the keyring. Currently, the test is done when the key is parsed, but given that at that point we can only sensibly refer to the contents of the system trusted keyring, we can only use that as the basis for working out the trustworthiness of a new key. With this change, a trusted keyring is a set of keys that once the trusted-only flag is set cannot be added to except by verification through one of the contained keys. Further, adding a key into a trusted keyring, whilst it might grant trustworthiness in the context of that keyring, does not automatically grant trustworthiness in the context of a second keyring to which it could be secondarily linked. To accomplish this, the authentication data associated with the key source must now be retained. For an X.509 cert, this means the contents of the AuthorityKeyIdentifier and the signature data. If system keyrings are disabled then restrict_link_by_builtin_trusted() resolves to restrict_link_reject(). The integrity digital signature code still works correctly with this as it was previously using KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there is no system keyring against which trust can be determined. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-06 18:14:26 +03:00
#define restrict_link_by_builtin_trusted restrict_link_reject
static inline __init int load_module_cert(struct key *keyring)
{
return 0;
}
#endif
#ifdef CONFIG_SECONDARY_TRUSTED_KEYRING
extern int restrict_link_by_builtin_and_secondary_trusted(
struct key *keyring,
const struct key_type *type,
const union key_payload *payload,
struct key *restriction_key);
#else
#define restrict_link_by_builtin_and_secondary_trusted restrict_link_by_builtin_trusted
#endif
certs: Add EFI_CERT_X509_GUID support for dbx entries This fixes CVE-2020-26541. The Secure Boot Forbidden Signature Database, dbx, contains a list of now revoked signatures and keys previously approved to boot with UEFI Secure Boot enabled. The dbx is capable of containing any number of EFI_CERT_X509_SHA256_GUID, EFI_CERT_SHA256_GUID, and EFI_CERT_X509_GUID entries. Currently when EFI_CERT_X509_GUID are contained in the dbx, the entries are skipped. Add support for EFI_CERT_X509_GUID dbx entries. When a EFI_CERT_X509_GUID is found, it is added as an asymmetrical key to the .blacklist keyring. Anytime the .platform keyring is used, the keys in the .blacklist keyring are referenced, if a matching key is found, the key will be rejected. [DH: Made the following changes: - Added to have a config option to enable the facility. This allows a Kconfig solution to make sure that pkcs7_validate_trust() is enabled.[1][2] - Moved the functions out from the middle of the blacklist functions. - Added kerneldoc comments.] Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> cc: Randy Dunlap <rdunlap@infradead.org> cc: Mickaël Salaün <mic@digikod.net> cc: Arnd Bergmann <arnd@kernel.org> cc: keyrings@vger.kernel.org Link: https://lore.kernel.org/r/20200901165143.10295-1-eric.snowberg@oracle.com/ # rfc Link: https://lore.kernel.org/r/20200909172736.73003-1-eric.snowberg@oracle.com/ # v2 Link: https://lore.kernel.org/r/20200911182230.62266-1-eric.snowberg@oracle.com/ # v3 Link: https://lore.kernel.org/r/20200916004927.64276-1-eric.snowberg@oracle.com/ # v4 Link: https://lore.kernel.org/r/20210122181054.32635-2-eric.snowberg@oracle.com/ # v5 Link: https://lore.kernel.org/r/161428672051.677100.11064981943343605138.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/161433310942.902181.4901864302675874242.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161529605075.163428.14625520893961300757.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/bc2c24e3-ed68-2521-0bf4-a1f6be4a895d@infradead.org/ [1] Link: https://lore.kernel.org/r/20210225125638.1841436-1-arnd@kernel.org/ [2]
2021-01-22 21:10:51 +03:00
extern struct pkcs7_message *pkcs7;
#ifdef CONFIG_SYSTEM_BLACKLIST_KEYRING
extern int mark_hash_blacklisted(const char *hash);
extern int is_hash_blacklisted(const u8 *hash, size_t hash_len,
const char *type);
extern int is_binary_blacklisted(const u8 *hash, size_t hash_len);
#else
static inline int is_hash_blacklisted(const u8 *hash, size_t hash_len,
const char *type)
{
return 0;
}
static inline int is_binary_blacklisted(const u8 *hash, size_t hash_len)
{
return 0;
}
#endif
certs: Add EFI_CERT_X509_GUID support for dbx entries This fixes CVE-2020-26541. The Secure Boot Forbidden Signature Database, dbx, contains a list of now revoked signatures and keys previously approved to boot with UEFI Secure Boot enabled. The dbx is capable of containing any number of EFI_CERT_X509_SHA256_GUID, EFI_CERT_SHA256_GUID, and EFI_CERT_X509_GUID entries. Currently when EFI_CERT_X509_GUID are contained in the dbx, the entries are skipped. Add support for EFI_CERT_X509_GUID dbx entries. When a EFI_CERT_X509_GUID is found, it is added as an asymmetrical key to the .blacklist keyring. Anytime the .platform keyring is used, the keys in the .blacklist keyring are referenced, if a matching key is found, the key will be rejected. [DH: Made the following changes: - Added to have a config option to enable the facility. This allows a Kconfig solution to make sure that pkcs7_validate_trust() is enabled.[1][2] - Moved the functions out from the middle of the blacklist functions. - Added kerneldoc comments.] Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> cc: Randy Dunlap <rdunlap@infradead.org> cc: Mickaël Salaün <mic@digikod.net> cc: Arnd Bergmann <arnd@kernel.org> cc: keyrings@vger.kernel.org Link: https://lore.kernel.org/r/20200901165143.10295-1-eric.snowberg@oracle.com/ # rfc Link: https://lore.kernel.org/r/20200909172736.73003-1-eric.snowberg@oracle.com/ # v2 Link: https://lore.kernel.org/r/20200911182230.62266-1-eric.snowberg@oracle.com/ # v3 Link: https://lore.kernel.org/r/20200916004927.64276-1-eric.snowberg@oracle.com/ # v4 Link: https://lore.kernel.org/r/20210122181054.32635-2-eric.snowberg@oracle.com/ # v5 Link: https://lore.kernel.org/r/161428672051.677100.11064981943343605138.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/161433310942.902181.4901864302675874242.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161529605075.163428.14625520893961300757.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/bc2c24e3-ed68-2521-0bf4-a1f6be4a895d@infradead.org/ [1] Link: https://lore.kernel.org/r/20210225125638.1841436-1-arnd@kernel.org/ [2]
2021-01-22 21:10:51 +03:00
#ifdef CONFIG_SYSTEM_REVOCATION_LIST
extern int add_key_to_revocation_list(const char *data, size_t size);
extern int is_key_on_revocation_list(struct pkcs7_message *pkcs7);
#else
static inline int add_key_to_revocation_list(const char *data, size_t size)
{
return 0;
}
static inline int is_key_on_revocation_list(struct pkcs7_message *pkcs7)
{
return -ENOKEY;
}
#endif
#ifdef CONFIG_IMA_BLACKLIST_KEYRING
extern struct key *ima_blacklist_keyring;
static inline struct key *get_ima_blacklist_keyring(void)
{
return ima_blacklist_keyring;
}
#else
static inline struct key *get_ima_blacklist_keyring(void)
{
return NULL;
}
#endif /* CONFIG_IMA_BLACKLIST_KEYRING */
#if defined(CONFIG_INTEGRITY_PLATFORM_KEYRING) && \
defined(CONFIG_SYSTEM_TRUSTED_KEYRING)
extern void __init set_platform_trusted_keys(struct key *keyring);
#else
static inline void set_platform_trusted_keys(struct key *keyring)
{
}
#endif
#endif /* _KEYS_SYSTEM_KEYRING_H */