WSL2-Linux-Kernel/sound/firewire/dice/dice-pcm.c

467 строки
12 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* dice_pcm.c - a part of driver for DICE based devices
*
* Copyright (c) Clemens Ladisch <clemens@ladisch.de>
* Copyright (c) 2014 Takashi Sakamoto <o-takashi@sakamocchi.jp>
*/
#include "dice.h"
static int dice_rate_constraint(struct snd_pcm_hw_params *params,
struct snd_pcm_hw_rule *rule)
{
struct snd_pcm_substream *substream = rule->private;
struct snd_dice *dice = substream->private_data;
unsigned int index = substream->pcm->device;
const struct snd_interval *c =
hw_param_interval_c(params, SNDRV_PCM_HW_PARAM_CHANNELS);
struct snd_interval *r =
hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval rates = {
.min = UINT_MAX, .max = 0, .integer = 1
};
unsigned int *pcm_channels;
enum snd_dice_rate_mode mode;
unsigned int i, rate;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
pcm_channels = dice->tx_pcm_chs[index];
else
pcm_channels = dice->rx_pcm_chs[index];
for (i = 0; i < ARRAY_SIZE(snd_dice_rates); ++i) {
rate = snd_dice_rates[i];
if (snd_dice_stream_get_rate_mode(dice, rate, &mode) < 0)
continue;
if (!snd_interval_test(c, pcm_channels[mode]))
continue;
rates.min = min(rates.min, rate);
rates.max = max(rates.max, rate);
}
return snd_interval_refine(r, &rates);
}
static int dice_channels_constraint(struct snd_pcm_hw_params *params,
struct snd_pcm_hw_rule *rule)
{
struct snd_pcm_substream *substream = rule->private;
struct snd_dice *dice = substream->private_data;
unsigned int index = substream->pcm->device;
const struct snd_interval *r =
hw_param_interval_c(params, SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *c =
hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
struct snd_interval channels = {
.min = UINT_MAX, .max = 0, .integer = 1
};
unsigned int *pcm_channels;
enum snd_dice_rate_mode mode;
unsigned int i, rate;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
pcm_channels = dice->tx_pcm_chs[index];
else
pcm_channels = dice->rx_pcm_chs[index];
for (i = 0; i < ARRAY_SIZE(snd_dice_rates); ++i) {
rate = snd_dice_rates[i];
if (snd_dice_stream_get_rate_mode(dice, rate, &mode) < 0)
continue;
if (!snd_interval_test(r, rate))
continue;
channels.min = min(channels.min, pcm_channels[mode]);
channels.max = max(channels.max, pcm_channels[mode]);
}
return snd_interval_refine(c, &channels);
}
static int limit_channels_and_rates(struct snd_dice *dice,
struct snd_pcm_runtime *runtime,
enum amdtp_stream_direction dir,
unsigned int index)
{
struct snd_pcm_hardware *hw = &runtime->hw;
unsigned int *pcm_channels;
unsigned int i;
if (dir == AMDTP_IN_STREAM)
pcm_channels = dice->tx_pcm_chs[index];
else
pcm_channels = dice->rx_pcm_chs[index];
hw->channels_min = UINT_MAX;
hw->channels_max = 0;
for (i = 0; i < ARRAY_SIZE(snd_dice_rates); ++i) {
enum snd_dice_rate_mode mode;
unsigned int rate, channels;
rate = snd_dice_rates[i];
if (snd_dice_stream_get_rate_mode(dice, rate, &mode) < 0)
continue;
hw->rates |= snd_pcm_rate_to_rate_bit(rate);
channels = pcm_channels[mode];
if (channels == 0)
continue;
hw->channels_min = min(hw->channels_min, channels);
hw->channels_max = max(hw->channels_max, channels);
}
snd_pcm_limit_hw_rates(runtime);
return 0;
}
static int init_hw_info(struct snd_dice *dice,
struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_pcm_hardware *hw = &runtime->hw;
unsigned int index = substream->pcm->device;
enum amdtp_stream_direction dir;
struct amdtp_stream *stream;
int err;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
hw->formats = AM824_IN_PCM_FORMAT_BITS;
dir = AMDTP_IN_STREAM;
stream = &dice->tx_stream[index];
} else {
hw->formats = AM824_OUT_PCM_FORMAT_BITS;
dir = AMDTP_OUT_STREAM;
stream = &dice->rx_stream[index];
}
err = limit_channels_and_rates(dice, substream->runtime, dir,
index);
if (err < 0)
return err;
err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
dice_rate_constraint, substream,
SNDRV_PCM_HW_PARAM_CHANNELS, -1);
if (err < 0)
return err;
err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
dice_channels_constraint, substream,
SNDRV_PCM_HW_PARAM_RATE, -1);
if (err < 0)
return err;
return amdtp_am824_add_pcm_hw_constraints(stream, runtime);
}
static int pcm_open(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
struct amdtp_domain *d = &dice->domain;
unsigned int source;
bool internal;
int err;
err = snd_dice_stream_lock_try(dice);
if (err < 0)
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
return err;
err = init_hw_info(dice, substream);
if (err < 0)
goto err_locked;
err = snd_dice_transaction_get_clock_source(dice, &source);
if (err < 0)
goto err_locked;
switch (source) {
case CLOCK_SOURCE_AES1:
case CLOCK_SOURCE_AES2:
case CLOCK_SOURCE_AES3:
case CLOCK_SOURCE_AES4:
case CLOCK_SOURCE_AES_ANY:
case CLOCK_SOURCE_ADAT:
case CLOCK_SOURCE_TDIF:
case CLOCK_SOURCE_WC:
internal = false;
break;
default:
internal = true;
break;
}
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
mutex_lock(&dice->mutex);
// When source of clock is not internal or any stream is reserved for
// transmission of PCM frames, the available sampling rate is limited
// at current one.
if (!internal ||
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
(dice->substreams_counter > 0 && d->events_per_period > 0)) {
unsigned int frames_per_period = d->events_per_period;
unsigned int frames_per_buffer = d->events_per_buffer;
unsigned int rate;
err = snd_dice_transaction_get_rate(dice, &rate);
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
if (err < 0) {
mutex_unlock(&dice->mutex);
goto err_locked;
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
}
substream->runtime->hw.rate_min = rate;
substream->runtime->hw.rate_max = rate;
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
if (frames_per_period > 0) {
// For double_pcm_frame quirk.
if (rate > 96000) {
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
frames_per_period *= 2;
frames_per_buffer *= 2;
}
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
err = snd_pcm_hw_constraint_minmax(substream->runtime,
SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
frames_per_period, frames_per_period);
if (err < 0) {
mutex_unlock(&dice->mutex);
goto err_locked;
}
err = snd_pcm_hw_constraint_minmax(substream->runtime,
SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
frames_per_buffer, frames_per_buffer);
if (err < 0) {
mutex_unlock(&dice->mutex);
goto err_locked;
}
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
}
}
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
mutex_unlock(&dice->mutex);
snd_pcm_set_sync(substream);
ALSA: dice: use the same size of period for PCM substream in AMDTP streams In current implementation, when opening a PCM substream, it's needed to check whether the opposite PCM substream runs. This is to assign effectual constraints (e.g. sampling rate) to opened PCM substream. The number of PCM substreams and MIDI substreams on AMDTP streams in domain is recorded in own structure. Usage of this count is an alternative of the above check. This is better because the count is incremented in pcm.hw_params earlier than pcm.trigger. This idea has one issue because it's incremented for MIDI substreams as well. In current implementation, for a case that any MIDI substream run and a PCM substream is going to start, PCM application to start the PCM substream can decide hardware parameters by restart packet streaming. Just checking the substream count can brings regression. Now AMDTP domain structure has a member for the size of PCM period in PCM substream which starts AMDTP streams in domain. When the value has zero and the substream count is greater than 1, it means that any MIDI substream starts AMDTP streams in domain. Usage of the value can resolve the above issue. This commit replaces the check with the substream count and the value for the size of PCM period. Dice hardware has a quirk called as 'Dual Wire'. For a case of higher sampling transmission frequency, this commit performs calculations between the number of PCM frames and the number of events in AMDTP stream. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-07 14:05:28 +03:00
return 0;
err_locked:
snd_dice_stream_lock_release(dice);
return err;
}
static int pcm_close(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
snd_dice_stream_lock_release(dice);
return 0;
}
static int pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
struct snd_dice *dice = substream->private_data;
int err;
err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
if (err < 0)
return err;
if (substream->runtime->status->state == SNDRV_PCM_STATE_OPEN) {
unsigned int rate = params_rate(hw_params);
unsigned int events_per_period = params_period_size(hw_params);
unsigned int events_per_buffer = params_buffer_size(hw_params);
mutex_lock(&dice->mutex);
// For double_pcm_frame quirk.
if (rate > 96000) {
events_per_period /= 2;
events_per_buffer /= 2;
}
err = snd_dice_stream_reserve_duplex(dice, rate,
events_per_period, events_per_buffer);
if (err >= 0)
++dice->substreams_counter;
mutex_unlock(&dice->mutex);
}
return err;
}
static int pcm_hw_free(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
mutex_lock(&dice->mutex);
if (substream->runtime->status->state != SNDRV_PCM_STATE_OPEN)
--dice->substreams_counter;
snd_dice_stream_stop_duplex(dice);
mutex_unlock(&dice->mutex);
return snd_pcm_lib_free_pages(substream);
}
static int capture_prepare(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
struct amdtp_stream *stream = &dice->tx_stream[substream->pcm->device];
int err;
mutex_lock(&dice->mutex);
err = snd_dice_stream_start_duplex(dice);
mutex_unlock(&dice->mutex);
if (err >= 0)
ALSA: dice: have two sets of isochronous resources/streams Currently ALSA dice driver handles a pair of isochronous resources for IEC 61883-1/6 packet streaming. While, according to some documents about ASICs named as 'Dice', several isochronous streams are available. Here, I start to describe ASICs produced under 'Dice' name. * Dice II (designed by wavefront semiconductor, including TCAT's IP) * STD (with limited functionality of DTCP) * CP (with full functionality of DTCP) * TCD2210/2210-E (so-called 'Dice Mini') * TCD2220/2220-E (so-called 'Dice Jr.') * TCD3070-CH (so-called 'Dice III') Some documents are public and we can see hardware design of them. We can find some articles about hardware internal register definitions (not registers exported to IEEE 1394 bus). * DICE II User Guide * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf * 6.1 AVS Audio Receivers * Table 6.1: AVS Audio Receiver Memory Map * ARX1-ARX4 * 6.2 AVS Audio Transmitters * Table 6.2: AVS Audio Transmitter Memory Map * ATX1, ATX2 * TCD22xx User Guide * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf * 6.1 AVS Audio Receivers * Table 66: AVS Audio Receiver Memory Map * ARX1, ARX2 * 6/2 AVS Audio Transmitters * Table 67: AVS Audio Transmitter Memory Map * ATX1, ATX2 * DICE III * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf * Dual stream 63 channel transmitter/receiver For Dice II and TCD22xx series, maximum 16 data channels are transferred in an AMDTP packet, while for Dice III, maximum 32 data channels are transferred. According to the design of the series of these ASICs, this commit allows this driver to handle additional set of isochronous resources. For practical reason, two pair of isochronous resources are added. As of this commit, this driver still use a pair of the first isochronous resources. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07 16:35:42 +03:00
amdtp_stream_pcm_prepare(stream);
return 0;
}
static int playback_prepare(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
struct amdtp_stream *stream = &dice->rx_stream[substream->pcm->device];
int err;
mutex_lock(&dice->mutex);
err = snd_dice_stream_start_duplex(dice);
mutex_unlock(&dice->mutex);
if (err >= 0)
ALSA: dice: have two sets of isochronous resources/streams Currently ALSA dice driver handles a pair of isochronous resources for IEC 61883-1/6 packet streaming. While, according to some documents about ASICs named as 'Dice', several isochronous streams are available. Here, I start to describe ASICs produced under 'Dice' name. * Dice II (designed by wavefront semiconductor, including TCAT's IP) * STD (with limited functionality of DTCP) * CP (with full functionality of DTCP) * TCD2210/2210-E (so-called 'Dice Mini') * TCD2220/2220-E (so-called 'Dice Jr.') * TCD3070-CH (so-called 'Dice III') Some documents are public and we can see hardware design of them. We can find some articles about hardware internal register definitions (not registers exported to IEEE 1394 bus). * DICE II User Guide * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf * 6.1 AVS Audio Receivers * Table 6.1: AVS Audio Receiver Memory Map * ARX1-ARX4 * 6.2 AVS Audio Transmitters * Table 6.2: AVS Audio Transmitter Memory Map * ATX1, ATX2 * TCD22xx User Guide * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf * 6.1 AVS Audio Receivers * Table 66: AVS Audio Receiver Memory Map * ARX1, ARX2 * 6/2 AVS Audio Transmitters * Table 67: AVS Audio Transmitter Memory Map * ATX1, ATX2 * DICE III * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf * Dual stream 63 channel transmitter/receiver For Dice II and TCD22xx series, maximum 16 data channels are transferred in an AMDTP packet, while for Dice III, maximum 32 data channels are transferred. According to the design of the series of these ASICs, this commit allows this driver to handle additional set of isochronous resources. For practical reason, two pair of isochronous resources are added. As of this commit, this driver still use a pair of the first isochronous resources. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07 16:35:42 +03:00
amdtp_stream_pcm_prepare(stream);
return err;
}
static int capture_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct snd_dice *dice = substream->private_data;
struct amdtp_stream *stream = &dice->tx_stream[substream->pcm->device];
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
ALSA: dice: have two sets of isochronous resources/streams Currently ALSA dice driver handles a pair of isochronous resources for IEC 61883-1/6 packet streaming. While, according to some documents about ASICs named as 'Dice', several isochronous streams are available. Here, I start to describe ASICs produced under 'Dice' name. * Dice II (designed by wavefront semiconductor, including TCAT's IP) * STD (with limited functionality of DTCP) * CP (with full functionality of DTCP) * TCD2210/2210-E (so-called 'Dice Mini') * TCD2220/2220-E (so-called 'Dice Jr.') * TCD3070-CH (so-called 'Dice III') Some documents are public and we can see hardware design of them. We can find some articles about hardware internal register definitions (not registers exported to IEEE 1394 bus). * DICE II User Guide * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf * 6.1 AVS Audio Receivers * Table 6.1: AVS Audio Receiver Memory Map * ARX1-ARX4 * 6.2 AVS Audio Transmitters * Table 6.2: AVS Audio Transmitter Memory Map * ATX1, ATX2 * TCD22xx User Guide * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf * 6.1 AVS Audio Receivers * Table 66: AVS Audio Receiver Memory Map * ARX1, ARX2 * 6/2 AVS Audio Transmitters * Table 67: AVS Audio Transmitter Memory Map * ATX1, ATX2 * DICE III * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf * Dual stream 63 channel transmitter/receiver For Dice II and TCD22xx series, maximum 16 data channels are transferred in an AMDTP packet, while for Dice III, maximum 32 data channels are transferred. According to the design of the series of these ASICs, this commit allows this driver to handle additional set of isochronous resources. For practical reason, two pair of isochronous resources are added. As of this commit, this driver still use a pair of the first isochronous resources. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07 16:35:42 +03:00
amdtp_stream_pcm_trigger(stream, substream);
break;
case SNDRV_PCM_TRIGGER_STOP:
ALSA: dice: have two sets of isochronous resources/streams Currently ALSA dice driver handles a pair of isochronous resources for IEC 61883-1/6 packet streaming. While, according to some documents about ASICs named as 'Dice', several isochronous streams are available. Here, I start to describe ASICs produced under 'Dice' name. * Dice II (designed by wavefront semiconductor, including TCAT's IP) * STD (with limited functionality of DTCP) * CP (with full functionality of DTCP) * TCD2210/2210-E (so-called 'Dice Mini') * TCD2220/2220-E (so-called 'Dice Jr.') * TCD3070-CH (so-called 'Dice III') Some documents are public and we can see hardware design of them. We can find some articles about hardware internal register definitions (not registers exported to IEEE 1394 bus). * DICE II User Guide * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf * 6.1 AVS Audio Receivers * Table 6.1: AVS Audio Receiver Memory Map * ARX1-ARX4 * 6.2 AVS Audio Transmitters * Table 6.2: AVS Audio Transmitter Memory Map * ATX1, ATX2 * TCD22xx User Guide * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf * 6.1 AVS Audio Receivers * Table 66: AVS Audio Receiver Memory Map * ARX1, ARX2 * 6/2 AVS Audio Transmitters * Table 67: AVS Audio Transmitter Memory Map * ATX1, ATX2 * DICE III * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf * Dual stream 63 channel transmitter/receiver For Dice II and TCD22xx series, maximum 16 data channels are transferred in an AMDTP packet, while for Dice III, maximum 32 data channels are transferred. According to the design of the series of these ASICs, this commit allows this driver to handle additional set of isochronous resources. For practical reason, two pair of isochronous resources are added. As of this commit, this driver still use a pair of the first isochronous resources. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07 16:35:42 +03:00
amdtp_stream_pcm_trigger(stream, NULL);
break;
default:
return -EINVAL;
}
return 0;
}
static int playback_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct snd_dice *dice = substream->private_data;
struct amdtp_stream *stream = &dice->rx_stream[substream->pcm->device];
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
ALSA: dice: have two sets of isochronous resources/streams Currently ALSA dice driver handles a pair of isochronous resources for IEC 61883-1/6 packet streaming. While, according to some documents about ASICs named as 'Dice', several isochronous streams are available. Here, I start to describe ASICs produced under 'Dice' name. * Dice II (designed by wavefront semiconductor, including TCAT's IP) * STD (with limited functionality of DTCP) * CP (with full functionality of DTCP) * TCD2210/2210-E (so-called 'Dice Mini') * TCD2220/2220-E (so-called 'Dice Jr.') * TCD3070-CH (so-called 'Dice III') Some documents are public and we can see hardware design of them. We can find some articles about hardware internal register definitions (not registers exported to IEEE 1394 bus). * DICE II User Guide * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf * 6.1 AVS Audio Receivers * Table 6.1: AVS Audio Receiver Memory Map * ARX1-ARX4 * 6.2 AVS Audio Transmitters * Table 6.2: AVS Audio Transmitter Memory Map * ATX1, ATX2 * TCD22xx User Guide * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf * 6.1 AVS Audio Receivers * Table 66: AVS Audio Receiver Memory Map * ARX1, ARX2 * 6/2 AVS Audio Transmitters * Table 67: AVS Audio Transmitter Memory Map * ATX1, ATX2 * DICE III * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf * Dual stream 63 channel transmitter/receiver For Dice II and TCD22xx series, maximum 16 data channels are transferred in an AMDTP packet, while for Dice III, maximum 32 data channels are transferred. According to the design of the series of these ASICs, this commit allows this driver to handle additional set of isochronous resources. For practical reason, two pair of isochronous resources are added. As of this commit, this driver still use a pair of the first isochronous resources. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07 16:35:42 +03:00
amdtp_stream_pcm_trigger(stream, substream);
break;
case SNDRV_PCM_TRIGGER_STOP:
ALSA: dice: have two sets of isochronous resources/streams Currently ALSA dice driver handles a pair of isochronous resources for IEC 61883-1/6 packet streaming. While, according to some documents about ASICs named as 'Dice', several isochronous streams are available. Here, I start to describe ASICs produced under 'Dice' name. * Dice II (designed by wavefront semiconductor, including TCAT's IP) * STD (with limited functionality of DTCP) * CP (with full functionality of DTCP) * TCD2210/2210-E (so-called 'Dice Mini') * TCD2220/2220-E (so-called 'Dice Jr.') * TCD3070-CH (so-called 'Dice III') Some documents are public and we can see hardware design of them. We can find some articles about hardware internal register definitions (not registers exported to IEEE 1394 bus). * DICE II User Guide * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf * 6.1 AVS Audio Receivers * Table 6.1: AVS Audio Receiver Memory Map * ARX1-ARX4 * 6.2 AVS Audio Transmitters * Table 6.2: AVS Audio Transmitter Memory Map * ATX1, ATX2 * TCD22xx User Guide * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf * 6.1 AVS Audio Receivers * Table 66: AVS Audio Receiver Memory Map * ARX1, ARX2 * 6/2 AVS Audio Transmitters * Table 67: AVS Audio Transmitter Memory Map * ATX1, ATX2 * DICE III * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf * Dual stream 63 channel transmitter/receiver For Dice II and TCD22xx series, maximum 16 data channels are transferred in an AMDTP packet, while for Dice III, maximum 32 data channels are transferred. According to the design of the series of these ASICs, this commit allows this driver to handle additional set of isochronous resources. For practical reason, two pair of isochronous resources are added. As of this commit, this driver still use a pair of the first isochronous resources. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07 16:35:42 +03:00
amdtp_stream_pcm_trigger(stream, NULL);
break;
default:
return -EINVAL;
}
return 0;
}
static snd_pcm_uframes_t capture_pointer(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
struct amdtp_stream *stream = &dice->tx_stream[substream->pcm->device];
return amdtp_domain_stream_pcm_pointer(&dice->domain, stream);
}
static snd_pcm_uframes_t playback_pointer(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
struct amdtp_stream *stream = &dice->rx_stream[substream->pcm->device];
return amdtp_domain_stream_pcm_pointer(&dice->domain, stream);
}
2017-06-07 03:38:05 +03:00
static int capture_ack(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
struct amdtp_stream *stream = &dice->tx_stream[substream->pcm->device];
return amdtp_domain_stream_pcm_ack(&dice->domain, stream);
2017-06-07 03:38:05 +03:00
}
static int playback_ack(struct snd_pcm_substream *substream)
{
struct snd_dice *dice = substream->private_data;
struct amdtp_stream *stream = &dice->rx_stream[substream->pcm->device];
return amdtp_domain_stream_pcm_ack(&dice->domain, stream);
2017-06-07 03:38:05 +03:00
}
int snd_dice_create_pcm(struct snd_dice *dice)
{
static const struct snd_pcm_ops capture_ops = {
.open = pcm_open,
.close = pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = pcm_hw_params,
.hw_free = pcm_hw_free,
.prepare = capture_prepare,
.trigger = capture_trigger,
.pointer = capture_pointer,
2017-06-07 03:38:05 +03:00
.ack = capture_ack,
};
static const struct snd_pcm_ops playback_ops = {
.open = pcm_open,
.close = pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = pcm_hw_params,
.hw_free = pcm_hw_free,
.prepare = playback_prepare,
.trigger = playback_trigger,
.pointer = playback_pointer,
2017-06-07 03:38:05 +03:00
.ack = playback_ack,
};
struct snd_pcm *pcm;
unsigned int capture, playback;
int i, j;
int err;
for (i = 0; i < MAX_STREAMS; i++) {
capture = playback = 0;
for (j = 0; j < SND_DICE_RATE_MODE_COUNT; ++j) {
if (dice->tx_pcm_chs[i][j] > 0)
capture = 1;
if (dice->rx_pcm_chs[i][j] > 0)
playback = 1;
}
err = snd_pcm_new(dice->card, "DICE", i, playback, capture,
&pcm);
if (err < 0)
return err;
pcm->private_data = dice;
strcpy(pcm->name, dice->card->shortname);
if (capture > 0)
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
&capture_ops);
if (playback > 0)
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
&playback_ops);
snd_pcm_lib_preallocate_pages_for_all(pcm,
SNDRV_DMA_TYPE_VMALLOC,
NULL, 0, 0);
}
return 0;
}