WSL2-Linux-Kernel/tools/perf/bench/mem-functions.c

376 строки
8.7 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* mem-memcpy.c
*
* Simple memcpy() and memset() benchmarks
*
* Written by Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
*/
#include "debug.h"
#include "../perf-sys.h"
#include <subcmd/parse-options.h>
#include "../util/header.h"
#include "../util/cloexec.h"
#include "../util/string2.h"
#include "bench.h"
#include "mem-memcpy-arch.h"
#include "mem-memset-arch.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/time.h>
#include <errno.h>
#include <linux/time64.h>
#include <linux/zalloc.h>
#define K 1024
static const char *size_str = "1MB";
static const char *function_str = "all";
static int nr_loops = 1;
static bool use_cycles;
static int cycles_fd;
static const struct option options[] = {
OPT_STRING('s', "size", &size_str, "1MB",
"Specify the size of the memory buffers. "
"Available units: B, KB, MB, GB and TB (case insensitive)"),
OPT_STRING('f', "function", &function_str, "all",
"Specify the function to run, \"all\" runs all available functions, \"help\" lists them"),
OPT_INTEGER('l', "nr_loops", &nr_loops,
"Specify the number of loops to run. (default: 1)"),
OPT_BOOLEAN('c', "cycles", &use_cycles,
"Use a cycles event instead of gettimeofday() to measure performance"),
OPT_END()
};
typedef void *(*memcpy_t)(void *, const void *, size_t);
typedef void *(*memset_t)(void *, int, size_t);
struct function {
const char *name;
const char *desc;
union {
memcpy_t memcpy;
memset_t memset;
} fn;
};
static struct perf_event_attr cycle_attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES
};
static int init_cycles(void)
{
cycles_fd = sys_perf_event_open(&cycle_attr, getpid(), -1, -1, perf_event_open_cloexec_flag());
if (cycles_fd < 0 && errno == ENOSYS) {
pr_debug("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
return -1;
}
return cycles_fd;
}
static u64 get_cycles(void)
{
int ret;
u64 clk;
ret = read(cycles_fd, &clk, sizeof(u64));
BUG_ON(ret != sizeof(u64));
return clk;
}
static double timeval2double(struct timeval *ts)
{
return (double)ts->tv_sec + (double)ts->tv_usec / (double)USEC_PER_SEC;
}
#define print_bps(x) do { \
if (x < K) \
printf(" %14lf bytes/sec\n", x); \
else if (x < K * K) \
printf(" %14lfd KB/sec\n", x / K); \
else if (x < K * K * K) \
printf(" %14lf MB/sec\n", x / K / K); \
else \
printf(" %14lf GB/sec\n", x / K / K / K); \
} while (0)
struct bench_mem_info {
const struct function *functions;
u64 (*do_cycles)(const struct function *r, size_t size, void *src, void *dst);
double (*do_gettimeofday)(const struct function *r, size_t size, void *src, void *dst);
const char *const *usage;
bool alloc_src;
};
static void __bench_mem_function(struct bench_mem_info *info, int r_idx, size_t size, double size_total)
{
const struct function *r = &info->functions[r_idx];
double result_bps = 0.0;
u64 result_cycles = 0;
void *src = NULL, *dst = zalloc(size);
printf("# function '%s' (%s)\n", r->name, r->desc);
if (dst == NULL)
goto out_alloc_failed;
if (info->alloc_src) {
src = zalloc(size);
if (src == NULL)
goto out_alloc_failed;
}
if (bench_format == BENCH_FORMAT_DEFAULT)
printf("# Copying %s bytes ...\n\n", size_str);
if (use_cycles) {
result_cycles = info->do_cycles(r, size, src, dst);
} else {
result_bps = info->do_gettimeofday(r, size, src, dst);
}
switch (bench_format) {
case BENCH_FORMAT_DEFAULT:
if (use_cycles) {
printf(" %14lf cycles/byte\n", (double)result_cycles/size_total);
} else {
print_bps(result_bps);
}
break;
case BENCH_FORMAT_SIMPLE:
if (use_cycles) {
printf("%lf\n", (double)result_cycles/size_total);
} else {
printf("%lf\n", result_bps);
}
break;
default:
BUG_ON(1);
break;
}
out_free:
free(src);
free(dst);
return;
out_alloc_failed:
printf("# Memory allocation failed - maybe size (%s) is too large?\n", size_str);
goto out_free;
}
static int bench_mem_common(int argc, const char **argv, struct bench_mem_info *info)
{
int i;
size_t size;
double size_total;
argc = parse_options(argc, argv, options, info->usage, 0);
if (use_cycles) {
i = init_cycles();
if (i < 0) {
fprintf(stderr, "Failed to open cycles counter\n");
return i;
}
}
size = (size_t)perf_atoll((char *)size_str);
size_total = (double)size * nr_loops;
if ((s64)size <= 0) {
fprintf(stderr, "Invalid size:%s\n", size_str);
return 1;
}
if (!strncmp(function_str, "all", 3)) {
for (i = 0; info->functions[i].name; i++)
__bench_mem_function(info, i, size, size_total);
return 0;
}
for (i = 0; info->functions[i].name; i++) {
if (!strcmp(info->functions[i].name, function_str))
break;
}
if (!info->functions[i].name) {
if (strcmp(function_str, "help") && strcmp(function_str, "h"))
printf("Unknown function: %s\n", function_str);
printf("Available functions:\n");
for (i = 0; info->functions[i].name; i++) {
printf("\t%s ... %s\n",
info->functions[i].name, info->functions[i].desc);
}
return 1;
}
__bench_mem_function(info, i, size, size_total);
return 0;
}
static void memcpy_prefault(memcpy_t fn, size_t size, void *src, void *dst)
{
/* Make sure to always prefault zero pages even if MMAP_THRESH is crossed: */
memset(src, 0, size);
/*
* We prefault the freshly allocated memory range here,
* to not measure page fault overhead:
*/
fn(dst, src, size);
}
static u64 do_memcpy_cycles(const struct function *r, size_t size, void *src, void *dst)
{
u64 cycle_start = 0ULL, cycle_end = 0ULL;
memcpy_t fn = r->fn.memcpy;
int i;
memcpy_prefault(fn, size, src, dst);
cycle_start = get_cycles();
for (i = 0; i < nr_loops; ++i)
fn(dst, src, size);
cycle_end = get_cycles();
return cycle_end - cycle_start;
}
static double do_memcpy_gettimeofday(const struct function *r, size_t size, void *src, void *dst)
{
struct timeval tv_start, tv_end, tv_diff;
memcpy_t fn = r->fn.memcpy;
int i;
memcpy_prefault(fn, size, src, dst);
BUG_ON(gettimeofday(&tv_start, NULL));
for (i = 0; i < nr_loops; ++i)
fn(dst, src, size);
BUG_ON(gettimeofday(&tv_end, NULL));
timersub(&tv_end, &tv_start, &tv_diff);
return (double)(((double)size * nr_loops) / timeval2double(&tv_diff));
}
struct function memcpy_functions[] = {
{ .name = "default",
.desc = "Default memcpy() provided by glibc",
.fn.memcpy = memcpy },
#ifdef HAVE_ARCH_X86_64_SUPPORT
# define MEMCPY_FN(_fn, _name, _desc) {.name = _name, .desc = _desc, .fn.memcpy = _fn},
# include "mem-memcpy-x86-64-asm-def.h"
# undef MEMCPY_FN
#endif
{ .name = NULL, }
};
static const char * const bench_mem_memcpy_usage[] = {
"perf bench mem memcpy <options>",
NULL
};
int bench_mem_memcpy(int argc, const char **argv)
{
struct bench_mem_info info = {
.functions = memcpy_functions,
.do_cycles = do_memcpy_cycles,
.do_gettimeofday = do_memcpy_gettimeofday,
.usage = bench_mem_memcpy_usage,
.alloc_src = true,
};
return bench_mem_common(argc, argv, &info);
}
static u64 do_memset_cycles(const struct function *r, size_t size, void *src __maybe_unused, void *dst)
{
u64 cycle_start = 0ULL, cycle_end = 0ULL;
memset_t fn = r->fn.memset;
int i;
/*
* We prefault the freshly allocated memory range here,
* to not measure page fault overhead:
*/
fn(dst, -1, size);
cycle_start = get_cycles();
for (i = 0; i < nr_loops; ++i)
fn(dst, i, size);
cycle_end = get_cycles();
return cycle_end - cycle_start;
}
static double do_memset_gettimeofday(const struct function *r, size_t size, void *src __maybe_unused, void *dst)
{
struct timeval tv_start, tv_end, tv_diff;
memset_t fn = r->fn.memset;
int i;
/*
* We prefault the freshly allocated memory range here,
* to not measure page fault overhead:
*/
fn(dst, -1, size);
BUG_ON(gettimeofday(&tv_start, NULL));
for (i = 0; i < nr_loops; ++i)
fn(dst, i, size);
BUG_ON(gettimeofday(&tv_end, NULL));
timersub(&tv_end, &tv_start, &tv_diff);
return (double)(((double)size * nr_loops) / timeval2double(&tv_diff));
}
static const char * const bench_mem_memset_usage[] = {
"perf bench mem memset <options>",
NULL
};
static const struct function memset_functions[] = {
{ .name = "default",
.desc = "Default memset() provided by glibc",
.fn.memset = memset },
#ifdef HAVE_ARCH_X86_64_SUPPORT
# define MEMSET_FN(_fn, _name, _desc) { .name = _name, .desc = _desc, .fn.memset = _fn },
# include "mem-memset-x86-64-asm-def.h"
# undef MEMSET_FN
#endif
{ .name = NULL, }
};
int bench_mem_memset(int argc, const char **argv)
{
struct bench_mem_info info = {
.functions = memset_functions,
.do_cycles = do_memset_cycles,
.do_gettimeofday = do_memset_gettimeofday,
.usage = bench_mem_memset_usage,
};
return bench_mem_common(argc, argv, &info);
}