WSL2-Linux-Kernel/arch/powerpc/include/asm/ucc_fast.h

245 строки
7.6 KiB
C
Исходник Обычный вид История

[POWERPC] Add QUICC Engine (QE) infrastructure Add QUICC Engine (QE) configuration, header files, and QE management and library code that are used by QE devices drivers. Includes Leo's modifications up to, and including, the platform_device to of_device adaptation: "The series of patches add generic QE infrastructure called qe_lib, and MPC8360EMDS board support. Qe_lib is used by QE device drivers such as ucc_geth driver. This version updates QE interrupt controller to use new irq mapping mechanism, addresses all the comments received with last submission and includes some style fixes. v2: Change to use device tree for BCSR and MURAM; Remove I/O port interrupt handling code as it is not generic enough. v3: Address comments from Kumar; Update definition of several device tree nodes; Copyright style change." In addition, the following changes have been made: o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o fixed qe_snums_init() serial num assignment to use a const array o made CONFIG_UCC_FAST select UCC_SLOW o reduced NR_QE_IC_INTS from 128 to 64 o remove _IO_BASE, etc. defines (not used) o removed irrelevant comments, added others to resemble removed BD_ defines o realigned struct definitions in headers o various other style fixes including things like pinMask -> pin_mask o fixed a ton of whitespace issues o marked ioregs as __be32/__be16 o removed platform_device code and redundant get_qe_base() o removed redundant comments o added cpu_relax() to qe_reset o uncasted all get_property() assignments o eliminated unneeded casts o eliminated immrbar_phys_to_virt (not used) Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:10:46 +04:00
/*
* Internal header file for UCC FAST unit routines.
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __UCC_FAST_H__
#define __UCC_FAST_H__
#include <linux/kernel.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include "ucc.h"
/* Receive BD's status */
#define R_E 0x80000000 /* buffer empty */
#define R_W 0x20000000 /* wrap bit */
#define R_I 0x10000000 /* interrupt on reception */
#define R_L 0x08000000 /* last */
#define R_F 0x04000000 /* first */
/* transmit BD's status */
#define T_R 0x80000000 /* ready bit */
#define T_W 0x20000000 /* wrap bit */
#define T_I 0x10000000 /* interrupt on completion */
#define T_L 0x08000000 /* last */
/* Rx Data buffer must be 4 bytes aligned in most cases */
#define UCC_FAST_RX_ALIGN 4
#define UCC_FAST_MRBLR_ALIGNMENT 4
#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8
/* Sizes */
#define UCC_FAST_URFS_MIN_VAL 0x88
#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8
/* ucc_fast_channel_protocol_mode - UCC FAST mode */
enum ucc_fast_channel_protocol_mode {
UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
};
/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
enum ucc_fast_transparent_txrx {
UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
};
/* UCC fast diagnostic mode */
enum ucc_fast_diag_mode {
UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
};
/* UCC fast Sync length (transparent mode only) */
enum ucc_fast_sync_len {
UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
};
/* UCC fast RTS mode */
enum ucc_fast_ready_to_send {
UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
};
/* UCC fast receiver decoding mode */
enum ucc_fast_rx_decoding_method {
UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
};
/* UCC fast transmitter encoding mode */
enum ucc_fast_tx_encoding_method {
UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
};
/* UCC fast CRC length */
enum ucc_fast_transparent_tcrc {
UCC_FAST_16_BIT_CRC = 0x00000000,
UCC_FAST_CRC_RESERVED0 = 0x00000040,
UCC_FAST_32_BIT_CRC = 0x00000080,
UCC_FAST_CRC_RESERVED1 = 0x000000C0
};
/* Fast UCC initialization structure */
struct ucc_fast_info {
int ucc_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
u32 regs;
int irq;
u32 uccm_mask;
int bd_mem_part;
int brkpt_support;
int grant_support;
int tsa;
int cdp;
int cds;
int ctsp;
int ctss;
int tci;
int txsy;
int rtsm;
int revd;
int rsyn;
u16 max_rx_buf_length;
u16 urfs;
u16 urfet;
u16 urfset;
u16 utfs;
u16 utfet;
u16 utftt;
u16 ufpt;
enum ucc_fast_channel_protocol_mode mode;
enum ucc_fast_transparent_txrx ttx_trx;
enum ucc_fast_tx_encoding_method tenc;
enum ucc_fast_rx_decoding_method renc;
enum ucc_fast_transparent_tcrc tcrc;
enum ucc_fast_sync_len synl;
};
struct ucc_fast_private {
struct ucc_fast_info *uf_info;
struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
u32 __iomem *p_ucce; /* a pointer to the event register in memory. */
u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */
#ifdef CONFIG_UGETH_TX_ON_DEMAND
u16 __iomem *p_utodr; /* pointer to the transmit on demand register */
#endif
[POWERPC] Add QUICC Engine (QE) infrastructure Add QUICC Engine (QE) configuration, header files, and QE management and library code that are used by QE devices drivers. Includes Leo's modifications up to, and including, the platform_device to of_device adaptation: "The series of patches add generic QE infrastructure called qe_lib, and MPC8360EMDS board support. Qe_lib is used by QE device drivers such as ucc_geth driver. This version updates QE interrupt controller to use new irq mapping mechanism, addresses all the comments received with last submission and includes some style fixes. v2: Change to use device tree for BCSR and MURAM; Remove I/O port interrupt handling code as it is not generic enough. v3: Address comments from Kumar; Update definition of several device tree nodes; Copyright style change." In addition, the following changes have been made: o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o fixed qe_snums_init() serial num assignment to use a const array o made CONFIG_UCC_FAST select UCC_SLOW o reduced NR_QE_IC_INTS from 128 to 64 o remove _IO_BASE, etc. defines (not used) o removed irrelevant comments, added others to resemble removed BD_ defines o realigned struct definitions in headers o various other style fixes including things like pinMask -> pin_mask o fixed a ton of whitespace issues o marked ioregs as __be32/__be16 o removed platform_device code and redundant get_qe_base() o removed redundant comments o added cpu_relax() to qe_reset o uncasted all get_property() assignments o eliminated unneeded casts o eliminated immrbar_phys_to_virt (not used) Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:10:46 +04:00
int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
int stopped_tx; /* Whether channel has been stopped for Tx
(STOP_TX, etc.) */
int stopped_rx; /* Whether channel has been stopped for Rx */
u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
virtual fifo */
u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
virtual fifo */
#ifdef STATISTICS
u32 tx_frames; /* Transmitted frames counter. */
u32 rx_frames; /* Received frames counter (only frames
passed to application). */
u32 tx_discarded; /* Discarded tx frames counter (frames that
were discarded by the driver due to errors).
*/
u32 rx_discarded; /* Discarded rx frames counter (frames that
were discarded by the driver due to errors).
*/
#endif /* STATISTICS */
u16 mrblr; /* maximum receive buffer length */
};
/* ucc_fast_init
* Initializes Fast UCC according to user provided parameters.
*
* uf_info - (In) pointer to the fast UCC info structure.
* uccf_ret - (Out) pointer to the fast UCC structure.
*/
int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
/* ucc_fast_free
* Frees all resources for fast UCC.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_free(struct ucc_fast_private * uccf);
/* ucc_fast_enable
* Enables a fast UCC port.
* This routine enables Tx and/or Rx through the General UCC Mode Register.
*
* uccf - (In) pointer to the fast UCC structure.
* mode - (In) TX, RX, or both.
*/
void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
/* ucc_fast_disable
* Disables a fast UCC port.
* This routine disables Tx and/or Rx through the General UCC Mode Register.
*
* uccf - (In) pointer to the fast UCC structure.
* mode - (In) TX, RX, or both.
*/
void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
/* ucc_fast_irq
* Handles interrupts on fast UCC.
* Called from the general interrupt routine to handle interrupts on fast UCC.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_irq(struct ucc_fast_private * uccf);
/* ucc_fast_transmit_on_demand
* Immediately forces a poll of the transmitter for data to be sent.
* Typically, the hardware performs a periodic poll for data that the
* transmit routine has set up to be transmitted. In cases where
* this polling cycle is not soon enough, this optional routine can
* be invoked to force a poll right away, instead. Proper use for
* each transmission for which this functionality is desired is to
* call the transmit routine and then this routine right after.
*
* uccf - (In) pointer to the fast UCC structure.
*/
void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
#endif /* __UCC_FAST_H__ */