WSL2-Linux-Kernel/drivers/s390/char/hmcdrv_cache.c

254 строки
6.6 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* SE/HMC Drive (Read) Cache Functions
*
* Copyright IBM Corp. 2013
* Author(s): Ralf Hoppe (rhoppe@de.ibm.com)
*
*/
#define KMSG_COMPONENT "hmcdrv"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/jiffies.h>
#include "hmcdrv_ftp.h"
#include "hmcdrv_cache.h"
#define HMCDRV_CACHE_TIMEOUT 30 /* aging timeout in seconds */
/**
* struct hmcdrv_cache_entry - file cache (only used on read/dir)
* @id: FTP command ID
* @content: kernel-space buffer, 4k aligned
* @len: size of @content cache (0 if caching disabled)
* @ofs: start of content within file (-1 if no cached content)
* @fname: file name
* @fsize: file size
* @timeout: cache timeout in jiffies
*
* Notice that the first three members (id, fname, fsize) are cached on all
* read/dir requests. But content is cached only under some preconditions.
* Uncached content is signalled by a negative value of @ofs.
*/
struct hmcdrv_cache_entry {
enum hmcdrv_ftp_cmdid id;
char fname[HMCDRV_FTP_FIDENT_MAX];
size_t fsize;
loff_t ofs;
unsigned long timeout;
void *content;
size_t len;
};
static int hmcdrv_cache_order; /* cache allocated page order */
static struct hmcdrv_cache_entry hmcdrv_cache_file = {
.fsize = SIZE_MAX,
.ofs = -1,
.len = 0,
.fname = {'\0'}
};
/**
* hmcdrv_cache_get() - looks for file data/content in read cache
* @ftp: pointer to FTP command specification
*
* Return: number of bytes read from cache or a negative number if nothing
* in content cache (for the file/cmd specified in @ftp)
*/
static ssize_t hmcdrv_cache_get(const struct hmcdrv_ftp_cmdspec *ftp)
{
loff_t pos; /* position in cache (signed) */
ssize_t len;
if ((ftp->id != hmcdrv_cache_file.id) ||
strcmp(hmcdrv_cache_file.fname, ftp->fname))
return -1;
if (ftp->ofs >= hmcdrv_cache_file.fsize) /* EOF ? */
return 0;
if ((hmcdrv_cache_file.ofs < 0) || /* has content? */
time_after(jiffies, hmcdrv_cache_file.timeout))
return -1;
/* there seems to be cached content - calculate the maximum number
* of bytes that can be returned (regarding file size and offset)
*/
len = hmcdrv_cache_file.fsize - ftp->ofs;
if (len > ftp->len)
len = ftp->len;
/* check if the requested chunk falls into our cache (which starts
* at offset 'hmcdrv_cache_file.ofs' in the file of interest)
*/
pos = ftp->ofs - hmcdrv_cache_file.ofs;
if ((pos >= 0) &&
((pos + len) <= hmcdrv_cache_file.len)) {
memcpy(ftp->buf,
hmcdrv_cache_file.content + pos,
len);
pr_debug("using cached content of '%s', returning %zd/%zd bytes\n",
hmcdrv_cache_file.fname, len,
hmcdrv_cache_file.fsize);
return len;
}
return -1;
}
/**
* hmcdrv_cache_do() - do a HMC drive CD/DVD transfer with cache update
* @ftp: pointer to FTP command specification
* @func: FTP transfer function to be used
*
* Return: number of bytes read/written or a (negative) error code
*/
static ssize_t hmcdrv_cache_do(const struct hmcdrv_ftp_cmdspec *ftp,
hmcdrv_cache_ftpfunc func)
{
ssize_t len;
/* only cache content if the read/dir cache really exists
* (hmcdrv_cache_file.len > 0), is large enough to handle the
* request (hmcdrv_cache_file.len >= ftp->len) and there is a need
* to do so (ftp->len > 0)
*/
if ((ftp->len > 0) && (hmcdrv_cache_file.len >= ftp->len)) {
/* because the cache is not located at ftp->buf, we have to
* assemble a new HMC drive FTP cmd specification (pointing
* to our cache, and using the increased size)
*/
struct hmcdrv_ftp_cmdspec cftp = *ftp; /* make a copy */
cftp.buf = hmcdrv_cache_file.content; /* and update */
cftp.len = hmcdrv_cache_file.len; /* buffer data */
len = func(&cftp, &hmcdrv_cache_file.fsize); /* now do */
if (len > 0) {
pr_debug("caching %zd bytes content for '%s'\n",
len, ftp->fname);
if (len > ftp->len)
len = ftp->len;
hmcdrv_cache_file.ofs = ftp->ofs;
hmcdrv_cache_file.timeout = jiffies +
HMCDRV_CACHE_TIMEOUT * HZ;
memcpy(ftp->buf, hmcdrv_cache_file.content, len);
}
} else {
len = func(ftp, &hmcdrv_cache_file.fsize);
hmcdrv_cache_file.ofs = -1; /* invalidate content */
}
if (len > 0) {
/* cache some file info (FTP command, file name and file
* size) unconditionally
*/
strlcpy(hmcdrv_cache_file.fname, ftp->fname,
HMCDRV_FTP_FIDENT_MAX);
hmcdrv_cache_file.id = ftp->id;
pr_debug("caching cmd %d, file size %zu for '%s'\n",
ftp->id, hmcdrv_cache_file.fsize, ftp->fname);
}
return len;
}
/**
* hmcdrv_cache_cmd() - perform a cached HMC drive CD/DVD transfer
* @ftp: pointer to FTP command specification
* @func: FTP transfer function to be used
*
* Attention: Notice that this function is not reentrant - so the caller
* must ensure exclusive execution.
*
* Return: number of bytes read/written or a (negative) error code
*/
ssize_t hmcdrv_cache_cmd(const struct hmcdrv_ftp_cmdspec *ftp,
hmcdrv_cache_ftpfunc func)
{
ssize_t len;
if ((ftp->id == HMCDRV_FTP_DIR) || /* read cache */
(ftp->id == HMCDRV_FTP_NLIST) ||
(ftp->id == HMCDRV_FTP_GET)) {
len = hmcdrv_cache_get(ftp);
if (len >= 0) /* got it from cache ? */
return len; /* yes */
len = hmcdrv_cache_do(ftp, func);
if (len >= 0)
return len;
} else {
len = func(ftp, NULL); /* simply do original command */
}
/* invalidate the (read) cache in case there was a write operation
* or an error on read/dir
*/
hmcdrv_cache_file.id = HMCDRV_FTP_NOOP;
hmcdrv_cache_file.fsize = LLONG_MAX;
hmcdrv_cache_file.ofs = -1;
return len;
}
/**
* hmcdrv_cache_startup() - startup of HMC drive cache
* @cachesize: cache size
*
* Return: 0 on success, else a (negative) error code
*/
int hmcdrv_cache_startup(size_t cachesize)
{
if (cachesize > 0) { /* perform caching ? */
hmcdrv_cache_order = get_order(cachesize);
hmcdrv_cache_file.content =
(void *) __get_free_pages(GFP_KERNEL | GFP_DMA,
hmcdrv_cache_order);
if (!hmcdrv_cache_file.content) {
pr_err("Allocating the requested cache size of %zu bytes failed\n",
cachesize);
return -ENOMEM;
}
pr_debug("content cache enabled, size is %zu bytes\n",
cachesize);
}
hmcdrv_cache_file.len = cachesize;
return 0;
}
/**
* hmcdrv_cache_shutdown() - shutdown of HMC drive cache
*/
void hmcdrv_cache_shutdown(void)
{
if (hmcdrv_cache_file.content) {
free_pages((unsigned long) hmcdrv_cache_file.content,
hmcdrv_cache_order);
hmcdrv_cache_file.content = NULL;
}
hmcdrv_cache_file.id = HMCDRV_FTP_NOOP;
hmcdrv_cache_file.fsize = LLONG_MAX;
hmcdrv_cache_file.ofs = -1;
hmcdrv_cache_file.len = 0; /* no cache */
}