WSL2-Linux-Kernel/drivers/nvmem/sunplus-ocotp.c

227 строки
5.7 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* The OCOTP driver for Sunplus SP7021
*
* Copyright (C) 2019 Sunplus Technology Inc., All rights reserved.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/nvmem-provider.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
/*
* OTP memory
* Each bank contains 4 words (32 bits).
* Bank 0 starts at offset 0 from the base.
*/
#define OTP_WORDS_PER_BANK 4
#define OTP_WORD_SIZE sizeof(u32)
#define OTP_BIT_ADDR_OF_BANK (8 * OTP_WORD_SIZE * OTP_WORDS_PER_BANK)
#define QAC628_OTP_NUM_BANKS 8
#define QAC628_OTP_SIZE (QAC628_OTP_NUM_BANKS * OTP_WORDS_PER_BANK * OTP_WORD_SIZE)
#define OTP_READ_TIMEOUT_US 200000
/* HB_GPIO */
#define ADDRESS_8_DATA 0x20
/* OTP_RX */
#define OTP_CONTROL_2 0x48
#define OTP_RD_PERIOD GENMASK(15, 8)
#define OTP_RD_PERIOD_MASK ~GENMASK(15, 8)
#define CPU_CLOCK FIELD_PREP(OTP_RD_PERIOD, 30)
#define SEL_BAK_KEY2 BIT(5)
#define SEL_BAK_KEY2_MASK ~BIT(5)
#define SW_TRIM_EN BIT(4)
#define SW_TRIM_EN_MASK ~BIT(4)
#define SEL_BAK_KEY BIT(3)
#define SEL_BAK_KEY_MASK ~BIT(3)
#define OTP_READ BIT(2)
#define OTP_LOAD_SECURE_DATA BIT(1)
#define OTP_LOAD_SECURE_DATA_MASK ~BIT(1)
#define OTP_DO_CRC BIT(0)
#define OTP_DO_CRC_MASK ~BIT(0)
#define OTP_STATUS 0x4c
#define OTP_READ_DONE BIT(4)
#define OTP_READ_DONE_MASK ~BIT(4)
#define OTP_LOAD_SECURE_DONE_MASK ~BIT(2)
#define OTP_READ_ADDRESS 0x50
enum base_type {
HB_GPIO,
OTPRX,
BASEMAX,
};
struct sp_ocotp_priv {
struct device *dev;
void __iomem *base[BASEMAX];
struct clk *clk;
};
struct sp_ocotp_data {
int size;
};
static const struct sp_ocotp_data sp_otp_v0 = {
.size = QAC628_OTP_SIZE,
};
static int sp_otp_read_real(struct sp_ocotp_priv *otp, int addr, char *value)
{
unsigned int addr_data;
unsigned int byte_shift;
unsigned int status;
int ret;
addr_data = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
addr_data = addr_data / OTP_WORD_SIZE;
byte_shift = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
byte_shift = byte_shift % OTP_WORD_SIZE;
addr = addr / (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
addr = addr * OTP_BIT_ADDR_OF_BANK;
writel(readl(otp->base[OTPRX] + OTP_STATUS) & OTP_READ_DONE_MASK &
OTP_LOAD_SECURE_DONE_MASK, otp->base[OTPRX] + OTP_STATUS);
writel(addr, otp->base[OTPRX] + OTP_READ_ADDRESS);
writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) | OTP_READ,
otp->base[OTPRX] + OTP_CONTROL_2);
writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) & SEL_BAK_KEY2_MASK & SW_TRIM_EN_MASK
& SEL_BAK_KEY_MASK & OTP_LOAD_SECURE_DATA_MASK & OTP_DO_CRC_MASK,
otp->base[OTPRX] + OTP_CONTROL_2);
writel((readl(otp->base[OTPRX] + OTP_CONTROL_2) & OTP_RD_PERIOD_MASK) | CPU_CLOCK,
otp->base[OTPRX] + OTP_CONTROL_2);
ret = readl_poll_timeout(otp->base[OTPRX] + OTP_STATUS, status,
status & OTP_READ_DONE, 10, OTP_READ_TIMEOUT_US);
if (ret < 0)
return ret;
*value = (readl(otp->base[HB_GPIO] + ADDRESS_8_DATA + addr_data * OTP_WORD_SIZE)
>> (8 * byte_shift)) & 0xff;
return ret;
}
static int sp_ocotp_read(void *priv, unsigned int offset, void *value, size_t bytes)
{
struct sp_ocotp_priv *otp = priv;
unsigned int addr;
char *buf = value;
char val[4];
int ret;
ret = clk_enable(otp->clk);
if (ret)
return ret;
*buf = 0;
for (addr = offset; addr < (offset + bytes); addr++) {
ret = sp_otp_read_real(otp, addr, val);
if (ret < 0) {
dev_err(otp->dev, "OTP read fail:%d at %d", ret, addr);
goto disable_clk;
}
*buf++ = *val;
}
disable_clk:
clk_disable(otp->clk);
return ret;
}
static struct nvmem_config sp_ocotp_nvmem_config = {
.name = "sp-ocotp",
.read_only = true,
.word_size = 1,
.size = QAC628_OTP_SIZE,
.stride = 1,
.reg_read = sp_ocotp_read,
.owner = THIS_MODULE,
};
static int sp_ocotp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct nvmem_device *nvmem;
struct sp_ocotp_priv *otp;
struct resource *res;
int ret;
otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
if (!otp)
return -ENOMEM;
otp->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hb_gpio");
otp->base[HB_GPIO] = devm_ioremap_resource(dev, res);
if (IS_ERR(otp->base[HB_GPIO]))
return PTR_ERR(otp->base[HB_GPIO]);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otprx");
otp->base[OTPRX] = devm_ioremap_resource(dev, res);
if (IS_ERR(otp->base[OTPRX]))
return PTR_ERR(otp->base[OTPRX]);
otp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(otp->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(otp->clk),
"devm_clk_get fail\n");
ret = clk_prepare(otp->clk);
if (ret < 0) {
dev_err(dev, "failed to prepare clk: %d\n", ret);
return ret;
}
sp_ocotp_nvmem_config.priv = otp;
sp_ocotp_nvmem_config.dev = dev;
nvmem = devm_nvmem_register(dev, &sp_ocotp_nvmem_config);
if (IS_ERR(nvmem))
return dev_err_probe(&pdev->dev, PTR_ERR(nvmem),
"register nvmem device fail\n");
platform_set_drvdata(pdev, nvmem);
dev_dbg(dev, "banks:%d x wpb:%d x wsize:%d = %d",
(int)QAC628_OTP_NUM_BANKS, (int)OTP_WORDS_PER_BANK,
(int)OTP_WORD_SIZE, (int)QAC628_OTP_SIZE);
return 0;
}
static const struct of_device_id sp_ocotp_dt_ids[] = {
{ .compatible = "sunplus,sp7021-ocotp", .data = &sp_otp_v0 },
{ }
};
MODULE_DEVICE_TABLE(of, sp_ocotp_dt_ids);
static struct platform_driver sp_otp_driver = {
.probe = sp_ocotp_probe,
.driver = {
.name = "sunplus,sp7021-ocotp",
.of_match_table = sp_ocotp_dt_ids,
}
};
module_platform_driver(sp_otp_driver);
MODULE_AUTHOR("Vincent Shih <vincent.sunplus@gmail.com>");
MODULE_DESCRIPTION("Sunplus On-Chip OTP driver");
MODULE_LICENSE("GPL");