WSL2-Linux-Kernel/drivers/remoteproc/meson_mx_ao_arc.c

262 строки
7.1 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*/
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/genalloc.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/remoteproc.h>
#include <linux/reset.h>
#include <linux/sizes.h>
#include "remoteproc_internal.h"
#define AO_REMAP_REG0 0x0
#define AO_REMAP_REG0_REMAP_AHB_SRAM_BITS_17_14_FOR_ARM_CPU GENMASK(3, 0)
#define AO_REMAP_REG1 0x4
#define AO_REMAP_REG1_MOVE_AHB_SRAM_TO_0X0_INSTEAD_OF_DDR BIT(4)
#define AO_REMAP_REG1_REMAP_AHB_SRAM_BITS_17_14_FOR_MEDIA_CPU GENMASK(3, 0)
#define AO_CPU_CNTL 0x0
#define AO_CPU_CNTL_AHB_SRAM_BITS_31_20 GENMASK(28, 16)
#define AO_CPU_CNTL_HALT BIT(9)
#define AO_CPU_CNTL_UNKNONWN BIT(8)
#define AO_CPU_CNTL_RUN BIT(0)
#define AO_CPU_STAT 0x4
#define AO_SECURE_REG0 0x0
#define AO_SECURE_REG0_AHB_SRAM_BITS_19_12 GENMASK(15, 8)
/* Only bits [31:20] and [17:14] are usable, all other bits must be zero */
#define MESON_AO_RPROC_SRAM_USABLE_BITS 0xfff3c000ULL
#define MESON_AO_RPROC_MEMORY_OFFSET 0x10000000
struct meson_mx_ao_arc_rproc_priv {
void __iomem *remap_base;
void __iomem *cpu_base;
unsigned long sram_va;
phys_addr_t sram_pa;
size_t sram_size;
struct gen_pool *sram_pool;
struct reset_control *arc_reset;
struct clk *arc_pclk;
struct regmap *secbus2_regmap;
};
static int meson_mx_ao_arc_rproc_start(struct rproc *rproc)
{
struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv;
phys_addr_t translated_sram_addr;
u32 tmp;
int ret;
ret = clk_prepare_enable(priv->arc_pclk);
if (ret)
return ret;
tmp = FIELD_PREP(AO_REMAP_REG0_REMAP_AHB_SRAM_BITS_17_14_FOR_ARM_CPU,
priv->sram_pa >> 14);
writel(tmp, priv->remap_base + AO_REMAP_REG0);
/*
* The SRAM content as seen by the ARC core always starts at 0x0
* regardless of the value given here (this was discovered by trial and
* error). For SoCs older than Meson6 we probably have to set
* AO_REMAP_REG1_MOVE_AHB_SRAM_TO_0X0_INSTEAD_OF_DDR to achieve the
* same. (At least) For Meson8 and newer that bit must not be set.
*/
writel(0x0, priv->remap_base + AO_REMAP_REG1);
regmap_update_bits(priv->secbus2_regmap, AO_SECURE_REG0,
AO_SECURE_REG0_AHB_SRAM_BITS_19_12,
FIELD_PREP(AO_SECURE_REG0_AHB_SRAM_BITS_19_12,
priv->sram_pa >> 12));
ret = reset_control_reset(priv->arc_reset);
if (ret) {
clk_disable_unprepare(priv->arc_pclk);
return ret;
}
usleep_range(10, 100);
/*
* Convert from 0xd9000000 to 0xc9000000 as the vendor driver does.
* This only seems to be relevant for the AO_CPU_CNTL register. It is
* unknown why this is needed.
*/
translated_sram_addr = priv->sram_pa - MESON_AO_RPROC_MEMORY_OFFSET;
tmp = FIELD_PREP(AO_CPU_CNTL_AHB_SRAM_BITS_31_20,
translated_sram_addr >> 20);
tmp |= AO_CPU_CNTL_UNKNONWN | AO_CPU_CNTL_RUN;
writel(tmp, priv->cpu_base + AO_CPU_CNTL);
usleep_range(20, 200);
return 0;
}
static int meson_mx_ao_arc_rproc_stop(struct rproc *rproc)
{
struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv;
writel(AO_CPU_CNTL_HALT, priv->cpu_base + AO_CPU_CNTL);
clk_disable_unprepare(priv->arc_pclk);
return 0;
}
static void *meson_mx_ao_arc_rproc_da_to_va(struct rproc *rproc, u64 da,
size_t len, bool *is_iomem)
{
struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv;
/* The memory from the ARC core's perspective always starts at 0x0. */
if ((da + len) > priv->sram_size)
return NULL;
return (void *)priv->sram_va + da;
}
static struct rproc_ops meson_mx_ao_arc_rproc_ops = {
.start = meson_mx_ao_arc_rproc_start,
.stop = meson_mx_ao_arc_rproc_stop,
.da_to_va = meson_mx_ao_arc_rproc_da_to_va,
.get_boot_addr = rproc_elf_get_boot_addr,
.load = rproc_elf_load_segments,
.sanity_check = rproc_elf_sanity_check,
};
static int meson_mx_ao_arc_rproc_probe(struct platform_device *pdev)
{
struct meson_mx_ao_arc_rproc_priv *priv;
struct device *dev = &pdev->dev;
const char *fw_name = NULL;
struct rproc *rproc;
int ret;
device_property_read_string(dev, "firmware-name", &fw_name);
rproc = devm_rproc_alloc(dev, "meson-mx-ao-arc",
&meson_mx_ao_arc_rproc_ops, fw_name,
sizeof(*priv));
if (!rproc)
return -ENOMEM;
rproc->has_iommu = false;
priv = rproc->priv;
priv->sram_pool = of_gen_pool_get(dev->of_node, "sram", 0);
if (!priv->sram_pool) {
dev_err(dev, "Could not get SRAM pool\n");
return -ENODEV;
}
priv->sram_size = gen_pool_avail(priv->sram_pool);
priv->sram_va = gen_pool_alloc(priv->sram_pool, priv->sram_size);
if (!priv->sram_va) {
dev_err(dev, "Could not alloc memory in SRAM pool\n");
return -ENOMEM;
}
priv->sram_pa = gen_pool_virt_to_phys(priv->sram_pool, priv->sram_va);
if (priv->sram_pa & ~MESON_AO_RPROC_SRAM_USABLE_BITS) {
dev_err(dev, "SRAM address contains unusable bits\n");
ret = -EINVAL;
goto err_free_genpool;
}
priv->secbus2_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
"amlogic,secbus2");
if (IS_ERR(priv->secbus2_regmap)) {
dev_err(dev, "Failed to find SECBUS2 regmap\n");
ret = PTR_ERR(priv->secbus2_regmap);
goto err_free_genpool;
}
priv->remap_base = devm_platform_ioremap_resource_byname(pdev, "remap");
if (IS_ERR(priv->remap_base)) {
ret = PTR_ERR(priv->remap_base);
goto err_free_genpool;
}
priv->cpu_base = devm_platform_ioremap_resource_byname(pdev, "cpu");
if (IS_ERR(priv->cpu_base)) {
ret = PTR_ERR(priv->cpu_base);
goto err_free_genpool;
}
priv->arc_reset = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(priv->arc_reset)) {
dev_err(dev, "Failed to get ARC reset\n");
ret = PTR_ERR(priv->arc_reset);
goto err_free_genpool;
}
priv->arc_pclk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->arc_pclk)) {
dev_err(dev, "Failed to get the ARC PCLK\n");
ret = PTR_ERR(priv->arc_pclk);
goto err_free_genpool;
}
platform_set_drvdata(pdev, rproc);
ret = rproc_add(rproc);
if (ret)
goto err_free_genpool;
return 0;
err_free_genpool:
gen_pool_free(priv->sram_pool, priv->sram_va, priv->sram_size);
return ret;
}
static int meson_mx_ao_arc_rproc_remove(struct platform_device *pdev)
{
struct rproc *rproc = platform_get_drvdata(pdev);
struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv;
rproc_del(rproc);
gen_pool_free(priv->sram_pool, priv->sram_va, priv->sram_size);
return 0;
}
static const struct of_device_id meson_mx_ao_arc_rproc_match[] = {
{ .compatible = "amlogic,meson8-ao-arc" },
{ .compatible = "amlogic,meson8b-ao-arc" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, meson_mx_ao_arc_rproc_match);
static struct platform_driver meson_mx_ao_arc_rproc_driver = {
.probe = meson_mx_ao_arc_rproc_probe,
.remove = meson_mx_ao_arc_rproc_remove,
.driver = {
.name = "meson-mx-ao-arc-rproc",
.of_match_table = meson_mx_ao_arc_rproc_match,
},
};
module_platform_driver(meson_mx_ao_arc_rproc_driver);
MODULE_DESCRIPTION("Amlogic Meson6/8/8b/8m2 AO ARC remote processor driver");
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
MODULE_LICENSE("GPL v2");