microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/net/core/skmsg.c

1006 строки
23 KiB
C
Исходник Обычный вид История

bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2017 - 2018 Covalent IO, Inc. http://covalent.io */
#include <linux/skmsg.h>
#include <linux/skbuff.h>
#include <linux/scatterlist.h>
#include <net/sock.h>
#include <net/tcp.h>
bpf: Fix running sk_skb program types with ktls KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:59 +03:00
#include <net/tls.h>
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
static bool sk_msg_try_coalesce_ok(struct sk_msg *msg, int elem_first_coalesce)
{
if (msg->sg.end > msg->sg.start &&
elem_first_coalesce < msg->sg.end)
return true;
if (msg->sg.end < msg->sg.start &&
(elem_first_coalesce > msg->sg.start ||
elem_first_coalesce < msg->sg.end))
return true;
return false;
}
int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
int elem_first_coalesce)
{
struct page_frag *pfrag = sk_page_frag(sk);
int ret = 0;
len -= msg->sg.size;
while (len > 0) {
struct scatterlist *sge;
u32 orig_offset;
int use, i;
if (!sk_page_frag_refill(sk, pfrag))
return -ENOMEM;
orig_offset = pfrag->offset;
use = min_t(int, len, pfrag->size - orig_offset);
if (!sk_wmem_schedule(sk, use))
return -ENOMEM;
i = msg->sg.end;
sk_msg_iter_var_prev(i);
sge = &msg->sg.data[i];
if (sk_msg_try_coalesce_ok(msg, elem_first_coalesce) &&
sg_page(sge) == pfrag->page &&
sge->offset + sge->length == orig_offset) {
sge->length += use;
} else {
if (sk_msg_full(msg)) {
ret = -ENOSPC;
break;
}
sge = &msg->sg.data[msg->sg.end];
sg_unmark_end(sge);
sg_set_page(sge, pfrag->page, use, orig_offset);
get_page(pfrag->page);
sk_msg_iter_next(msg, end);
}
sk_mem_charge(sk, use);
msg->sg.size += use;
pfrag->offset += use;
len -= use;
}
return ret;
}
EXPORT_SYMBOL_GPL(sk_msg_alloc);
tls: convert to generic sk_msg interface Convert kTLS over to make use of sk_msg interface for plaintext and encrypted scattergather data, so it reuses all the sk_msg helpers and data structure which later on in a second step enables to glue this to BPF. This also allows to remove quite a bit of open coded helpers which are covered by the sk_msg API. Recent changes in kTLs 80ece6a03aaf ("tls: Remove redundant vars from tls record structure") and 4e6d47206c32 ("tls: Add support for inplace records encryption") changed the data path handling a bit; while we've kept the latter optimization intact, we had to undo the former change to better fit the sk_msg model, hence the sg_aead_in and sg_aead_out have been brought back and are linked into the sk_msg sgs. Now the kTLS record contains a msg_plaintext and msg_encrypted sk_msg each. In the original code, the zerocopy_from_iter() has been used out of TX but also RX path. For the strparser skb-based RX path, we've left the zerocopy_from_iter() in decrypt_internal() mostly untouched, meaning it has been moved into tls_setup_from_iter() with charging logic removed (as not used from RX). Given RX path is not based on sk_msg objects, we haven't pursued setting up a dummy sk_msg to call into sk_msg_zerocopy_from_iter(), but it could be an option to prusue in a later step. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:59 +03:00
int sk_msg_clone(struct sock *sk, struct sk_msg *dst, struct sk_msg *src,
u32 off, u32 len)
{
int i = src->sg.start;
struct scatterlist *sge = sk_msg_elem(src, i);
Optimize sk_msg_clone() by data merge to end dst sg entry Function sk_msg_clone has been modified to merge the data from source sg entry to destination sg entry if the cloned data resides in same page and is contiguous to the end entry of destination sk_msg. This improves kernel tls throughput to the tune of 10%. When the user space tls application calls sendmsg() with MSG_MORE, it leads to calling sk_msg_clone() with new data being cloned placed continuous to previously cloned data. Without this optimization, a new SG entry in the destination sk_msg i.e. rec->msg_plaintext in tls_clone_plaintext_msg() gets used. This leads to exhaustion of sg entries in rec->msg_plaintext even before a full 16K of allowable record data is accumulated. Hence we lose oppurtunity to encrypt and send a full 16K record. With this patch, the kernel tls can accumulate full 16K of record data irrespective of the size of data passed in sendmsg() with MSG_MORE. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16 04:42:44 +03:00
struct scatterlist *sgd = NULL;
tls: convert to generic sk_msg interface Convert kTLS over to make use of sk_msg interface for plaintext and encrypted scattergather data, so it reuses all the sk_msg helpers and data structure which later on in a second step enables to glue this to BPF. This also allows to remove quite a bit of open coded helpers which are covered by the sk_msg API. Recent changes in kTLs 80ece6a03aaf ("tls: Remove redundant vars from tls record structure") and 4e6d47206c32 ("tls: Add support for inplace records encryption") changed the data path handling a bit; while we've kept the latter optimization intact, we had to undo the former change to better fit the sk_msg model, hence the sg_aead_in and sg_aead_out have been brought back and are linked into the sk_msg sgs. Now the kTLS record contains a msg_plaintext and msg_encrypted sk_msg each. In the original code, the zerocopy_from_iter() has been used out of TX but also RX path. For the strparser skb-based RX path, we've left the zerocopy_from_iter() in decrypt_internal() mostly untouched, meaning it has been moved into tls_setup_from_iter() with charging logic removed (as not used from RX). Given RX path is not based on sk_msg objects, we haven't pursued setting up a dummy sk_msg to call into sk_msg_zerocopy_from_iter(), but it could be an option to prusue in a later step. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:59 +03:00
u32 sge_len, sge_off;
while (off) {
if (sge->length > off)
break;
off -= sge->length;
sk_msg_iter_var_next(i);
if (i == src->sg.end && off)
return -ENOSPC;
sge = sk_msg_elem(src, i);
}
while (len) {
sge_len = sge->length - off;
if (sge_len > len)
sge_len = len;
Optimize sk_msg_clone() by data merge to end dst sg entry Function sk_msg_clone has been modified to merge the data from source sg entry to destination sg entry if the cloned data resides in same page and is contiguous to the end entry of destination sk_msg. This improves kernel tls throughput to the tune of 10%. When the user space tls application calls sendmsg() with MSG_MORE, it leads to calling sk_msg_clone() with new data being cloned placed continuous to previously cloned data. Without this optimization, a new SG entry in the destination sk_msg i.e. rec->msg_plaintext in tls_clone_plaintext_msg() gets used. This leads to exhaustion of sg entries in rec->msg_plaintext even before a full 16K of allowable record data is accumulated. Hence we lose oppurtunity to encrypt and send a full 16K record. With this patch, the kernel tls can accumulate full 16K of record data irrespective of the size of data passed in sendmsg() with MSG_MORE. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16 04:42:44 +03:00
if (dst->sg.end)
sgd = sk_msg_elem(dst, dst->sg.end - 1);
if (sgd &&
(sg_page(sge) == sg_page(sgd)) &&
(sg_virt(sge) + off == sg_virt(sgd) + sgd->length)) {
sgd->length += sge_len;
dst->sg.size += sge_len;
} else if (!sk_msg_full(dst)) {
sge_off = sge->offset + off;
sk_msg_page_add(dst, sg_page(sge), sge_len, sge_off);
} else {
return -ENOSPC;
}
tls: convert to generic sk_msg interface Convert kTLS over to make use of sk_msg interface for plaintext and encrypted scattergather data, so it reuses all the sk_msg helpers and data structure which later on in a second step enables to glue this to BPF. This also allows to remove quite a bit of open coded helpers which are covered by the sk_msg API. Recent changes in kTLs 80ece6a03aaf ("tls: Remove redundant vars from tls record structure") and 4e6d47206c32 ("tls: Add support for inplace records encryption") changed the data path handling a bit; while we've kept the latter optimization intact, we had to undo the former change to better fit the sk_msg model, hence the sg_aead_in and sg_aead_out have been brought back and are linked into the sk_msg sgs. Now the kTLS record contains a msg_plaintext and msg_encrypted sk_msg each. In the original code, the zerocopy_from_iter() has been used out of TX but also RX path. For the strparser skb-based RX path, we've left the zerocopy_from_iter() in decrypt_internal() mostly untouched, meaning it has been moved into tls_setup_from_iter() with charging logic removed (as not used from RX). Given RX path is not based on sk_msg objects, we haven't pursued setting up a dummy sk_msg to call into sk_msg_zerocopy_from_iter(), but it could be an option to prusue in a later step. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:59 +03:00
off = 0;
len -= sge_len;
sk_mem_charge(sk, sge_len);
sk_msg_iter_var_next(i);
if (i == src->sg.end && len)
return -ENOSPC;
sge = sk_msg_elem(src, i);
}
return 0;
}
EXPORT_SYMBOL_GPL(sk_msg_clone);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
void sk_msg_return_zero(struct sock *sk, struct sk_msg *msg, int bytes)
{
int i = msg->sg.start;
do {
struct scatterlist *sge = sk_msg_elem(msg, i);
if (bytes < sge->length) {
sge->length -= bytes;
sge->offset += bytes;
sk_mem_uncharge(sk, bytes);
break;
}
sk_mem_uncharge(sk, sge->length);
bytes -= sge->length;
sge->length = 0;
sge->offset = 0;
sk_msg_iter_var_next(i);
} while (bytes && i != msg->sg.end);
msg->sg.start = i;
}
EXPORT_SYMBOL_GPL(sk_msg_return_zero);
void sk_msg_return(struct sock *sk, struct sk_msg *msg, int bytes)
{
int i = msg->sg.start;
do {
struct scatterlist *sge = &msg->sg.data[i];
int uncharge = (bytes < sge->length) ? bytes : sge->length;
sk_mem_uncharge(sk, uncharge);
bytes -= uncharge;
sk_msg_iter_var_next(i);
} while (i != msg->sg.end);
}
EXPORT_SYMBOL_GPL(sk_msg_return);
static int sk_msg_free_elem(struct sock *sk, struct sk_msg *msg, u32 i,
bool charge)
{
struct scatterlist *sge = sk_msg_elem(msg, i);
u32 len = sge->length;
if (charge)
sk_mem_uncharge(sk, len);
if (!msg->skb)
put_page(sg_page(sge));
memset(sge, 0, sizeof(*sge));
return len;
}
static int __sk_msg_free(struct sock *sk, struct sk_msg *msg, u32 i,
bool charge)
{
struct scatterlist *sge = sk_msg_elem(msg, i);
int freed = 0;
while (msg->sg.size) {
msg->sg.size -= sge->length;
freed += sk_msg_free_elem(sk, msg, i, charge);
sk_msg_iter_var_next(i);
sk_msg_check_to_free(msg, i, msg->sg.size);
sge = sk_msg_elem(msg, i);
}
net/core/skmsg: Delete an unnecessary check before the function call “consume_skb” The consume_skb() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22 19:00:40 +03:00
consume_skb(msg->skb);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
sk_msg_init(msg);
return freed;
}
int sk_msg_free_nocharge(struct sock *sk, struct sk_msg *msg)
{
return __sk_msg_free(sk, msg, msg->sg.start, false);
}
EXPORT_SYMBOL_GPL(sk_msg_free_nocharge);
int sk_msg_free(struct sock *sk, struct sk_msg *msg)
{
return __sk_msg_free(sk, msg, msg->sg.start, true);
}
EXPORT_SYMBOL_GPL(sk_msg_free);
static void __sk_msg_free_partial(struct sock *sk, struct sk_msg *msg,
u32 bytes, bool charge)
{
struct scatterlist *sge;
u32 i = msg->sg.start;
while (bytes) {
sge = sk_msg_elem(msg, i);
if (!sge->length)
break;
if (bytes < sge->length) {
if (charge)
sk_mem_uncharge(sk, bytes);
sge->length -= bytes;
sge->offset += bytes;
msg->sg.size -= bytes;
break;
}
msg->sg.size -= sge->length;
bytes -= sge->length;
sk_msg_free_elem(sk, msg, i, charge);
sk_msg_iter_var_next(i);
sk_msg_check_to_free(msg, i, bytes);
}
msg->sg.start = i;
}
void sk_msg_free_partial(struct sock *sk, struct sk_msg *msg, u32 bytes)
{
__sk_msg_free_partial(sk, msg, bytes, true);
}
EXPORT_SYMBOL_GPL(sk_msg_free_partial);
void sk_msg_free_partial_nocharge(struct sock *sk, struct sk_msg *msg,
u32 bytes)
{
__sk_msg_free_partial(sk, msg, bytes, false);
}
void sk_msg_trim(struct sock *sk, struct sk_msg *msg, int len)
{
int trim = msg->sg.size - len;
u32 i = msg->sg.end;
if (trim <= 0) {
WARN_ON(trim < 0);
return;
}
sk_msg_iter_var_prev(i);
msg->sg.size = len;
while (msg->sg.data[i].length &&
trim >= msg->sg.data[i].length) {
trim -= msg->sg.data[i].length;
sk_msg_free_elem(sk, msg, i, true);
sk_msg_iter_var_prev(i);
if (!trim)
goto out;
}
msg->sg.data[i].length -= trim;
sk_mem_uncharge(sk, trim);
net/tls: fix sk_msg trim on fallback to copy mode sk_msg_trim() tries to only update curr pointer if it falls into the trimmed region. The logic, however, does not take into the account pointer wrapping that sk_msg_iter_var_prev() does nor (as John points out) the fact that msg->sg is a ring buffer. This means that when the message was trimmed completely, the new curr pointer would have the value of MAX_MSG_FRAGS - 1, which is neither smaller than any other value, nor would it actually be correct. Special case the trimming to 0 length a little bit and rework the comparison between curr and end to take into account wrapping. This bug caused the TLS code to not copy all of the message, if zero copy filled in fewer sg entries than memcopy would need. Big thanks to Alexander Potapenko for the non-KMSAN reproducer. v2: - take into account that msg->sg is a ring buffer (John). Link: https://lore.kernel.org/netdev/20191030160542.30295-1-jakub.kicinski@netronome.com/ (v1) Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Reported-by: syzbot+f8495bff23a879a6d0bd@syzkaller.appspotmail.com Reported-by: syzbot+6f50c99e8f6194bf363f@syzkaller.appspotmail.com Co-developed-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05 02:36:57 +03:00
/* Adjust copybreak if it falls into the trimmed part of last buf */
if (msg->sg.curr == i && msg->sg.copybreak > msg->sg.data[i].length)
msg->sg.copybreak = msg->sg.data[i].length;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
out:
net/tls: fix sk_msg trim on fallback to copy mode sk_msg_trim() tries to only update curr pointer if it falls into the trimmed region. The logic, however, does not take into the account pointer wrapping that sk_msg_iter_var_prev() does nor (as John points out) the fact that msg->sg is a ring buffer. This means that when the message was trimmed completely, the new curr pointer would have the value of MAX_MSG_FRAGS - 1, which is neither smaller than any other value, nor would it actually be correct. Special case the trimming to 0 length a little bit and rework the comparison between curr and end to take into account wrapping. This bug caused the TLS code to not copy all of the message, if zero copy filled in fewer sg entries than memcopy would need. Big thanks to Alexander Potapenko for the non-KMSAN reproducer. v2: - take into account that msg->sg is a ring buffer (John). Link: https://lore.kernel.org/netdev/20191030160542.30295-1-jakub.kicinski@netronome.com/ (v1) Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Reported-by: syzbot+f8495bff23a879a6d0bd@syzkaller.appspotmail.com Reported-by: syzbot+6f50c99e8f6194bf363f@syzkaller.appspotmail.com Co-developed-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05 02:36:57 +03:00
sk_msg_iter_var_next(i);
msg->sg.end = i;
/* If we trim data a full sg elem before curr pointer update
* copybreak and current so that any future copy operations
* start at new copy location.
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
* However trimed data that has not yet been used in a copy op
* does not require an update.
*/
net/tls: fix sk_msg trim on fallback to copy mode sk_msg_trim() tries to only update curr pointer if it falls into the trimmed region. The logic, however, does not take into the account pointer wrapping that sk_msg_iter_var_prev() does nor (as John points out) the fact that msg->sg is a ring buffer. This means that when the message was trimmed completely, the new curr pointer would have the value of MAX_MSG_FRAGS - 1, which is neither smaller than any other value, nor would it actually be correct. Special case the trimming to 0 length a little bit and rework the comparison between curr and end to take into account wrapping. This bug caused the TLS code to not copy all of the message, if zero copy filled in fewer sg entries than memcopy would need. Big thanks to Alexander Potapenko for the non-KMSAN reproducer. v2: - take into account that msg->sg is a ring buffer (John). Link: https://lore.kernel.org/netdev/20191030160542.30295-1-jakub.kicinski@netronome.com/ (v1) Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Reported-by: syzbot+f8495bff23a879a6d0bd@syzkaller.appspotmail.com Reported-by: syzbot+6f50c99e8f6194bf363f@syzkaller.appspotmail.com Co-developed-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-05 02:36:57 +03:00
if (!msg->sg.size) {
msg->sg.curr = msg->sg.start;
msg->sg.copybreak = 0;
} else if (sk_msg_iter_dist(msg->sg.start, msg->sg.curr) >=
sk_msg_iter_dist(msg->sg.start, msg->sg.end)) {
sk_msg_iter_var_prev(i);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
msg->sg.curr = i;
msg->sg.copybreak = msg->sg.data[i].length;
}
}
EXPORT_SYMBOL_GPL(sk_msg_trim);
int sk_msg_zerocopy_from_iter(struct sock *sk, struct iov_iter *from,
struct sk_msg *msg, u32 bytes)
{
int i, maxpages, ret = 0, num_elems = sk_msg_elem_used(msg);
const int to_max_pages = MAX_MSG_FRAGS;
struct page *pages[MAX_MSG_FRAGS];
ssize_t orig, copied, use, offset;
orig = msg->sg.size;
while (bytes > 0) {
i = 0;
maxpages = to_max_pages - num_elems;
if (maxpages == 0) {
ret = -EFAULT;
goto out;
}
copied = iov_iter_get_pages(from, pages, bytes, maxpages,
&offset);
if (copied <= 0) {
ret = -EFAULT;
goto out;
}
iov_iter_advance(from, copied);
bytes -= copied;
msg->sg.size += copied;
while (copied) {
use = min_t(int, copied, PAGE_SIZE - offset);
sg_set_page(&msg->sg.data[msg->sg.end],
pages[i], use, offset);
sg_unmark_end(&msg->sg.data[msg->sg.end]);
sk_mem_charge(sk, use);
offset = 0;
copied -= use;
sk_msg_iter_next(msg, end);
num_elems++;
i++;
}
/* When zerocopy is mixed with sk_msg_*copy* operations we
* may have a copybreak set in this case clear and prefer
* zerocopy remainder when possible.
*/
msg->sg.copybreak = 0;
msg->sg.curr = msg->sg.end;
}
out:
/* Revert iov_iter updates, msg will need to use 'trim' later if it
* also needs to be cleared.
*/
if (ret)
iov_iter_revert(from, msg->sg.size - orig);
return ret;
}
EXPORT_SYMBOL_GPL(sk_msg_zerocopy_from_iter);
int sk_msg_memcopy_from_iter(struct sock *sk, struct iov_iter *from,
struct sk_msg *msg, u32 bytes)
{
int ret = -ENOSPC, i = msg->sg.curr;
struct scatterlist *sge;
u32 copy, buf_size;
void *to;
do {
sge = sk_msg_elem(msg, i);
/* This is possible if a trim operation shrunk the buffer */
if (msg->sg.copybreak >= sge->length) {
msg->sg.copybreak = 0;
sk_msg_iter_var_next(i);
if (i == msg->sg.end)
break;
sge = sk_msg_elem(msg, i);
}
buf_size = sge->length - msg->sg.copybreak;
copy = (buf_size > bytes) ? bytes : buf_size;
to = sg_virt(sge) + msg->sg.copybreak;
msg->sg.copybreak += copy;
if (sk->sk_route_caps & NETIF_F_NOCACHE_COPY)
ret = copy_from_iter_nocache(to, copy, from);
else
ret = copy_from_iter(to, copy, from);
if (ret != copy) {
ret = -EFAULT;
goto out;
}
bytes -= copy;
if (!bytes)
break;
msg->sg.copybreak = 0;
sk_msg_iter_var_next(i);
} while (i != msg->sg.end);
out:
msg->sg.curr = i;
return ret;
}
EXPORT_SYMBOL_GPL(sk_msg_memcopy_from_iter);
static int sk_psock_skb_ingress(struct sk_psock *psock, struct sk_buff *skb)
{
struct sock *sk = psock->sk;
int copied = 0, num_sge;
struct sk_msg *msg;
msg = kzalloc(sizeof(*msg), __GFP_NOWARN | GFP_ATOMIC);
if (unlikely(!msg))
return -EAGAIN;
if (!sk_rmem_schedule(sk, skb, skb->len)) {
kfree(msg);
return -EAGAIN;
}
sk_msg_init(msg);
num_sge = skb_to_sgvec(skb, msg->sg.data, 0, skb->len);
if (unlikely(num_sge < 0)) {
kfree(msg);
return num_sge;
}
sk_mem_charge(sk, skb->len);
copied = skb->len;
msg->sg.start = 0;
bpf: sockmap fix msg->sg.size account on ingress skb When converting a skb to msg->sg we forget to set the size after the latest ktls/tls code conversion. This patch can be reached by doing a redir into ingress path from BPF skb sock recv hook. Then trying to read the size fails. Fix this by setting the size. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-13 17:19:55 +03:00
msg->sg.size = copied;
net: skmsg: fix TLS 1.3 crash with full sk_msg TLS 1.3 started using the entry at the end of the SG array for chaining-in the single byte content type entry. This mostly works: [ E E E E E E . . ] ^ ^ start end E < content type / [ E E E E E E C . ] ^ ^ start end (Where E denotes a populated SG entry; C denotes a chaining entry.) If the array is full, however, the end will point to the start: [ E E E E E E E E ] ^ start end And we end up overwriting the start: E < content type / [ C E E E E E E E ] ^ start end The sg array is supposed to be a circular buffer with start and end markers pointing anywhere. In case where start > end (i.e. the circular buffer has "wrapped") there is an extra entry reserved at the end to chain the two halves together. [ E E E E E E . . l ] (Where l is the reserved entry for "looping" back to front. As suggested by John, let's reserve another entry for chaining SG entries after the main circular buffer. Note that this entry has to be pointed to by the end entry so its position is not fixed. Examples of full messages: [ E E E E E E E E . l ] ^ ^ start end <---------------. [ E E . E E E E E E l ] ^ ^ end start Now the end will always point to an unused entry, so TLS 1.3 can always use it. Fixes: 130b392c6cd6 ("net: tls: Add tls 1.3 support") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-27 23:16:41 +03:00
msg->sg.end = num_sge;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
msg->skb = skb;
sk_psock_queue_msg(psock, msg);
bpf: sk_msg, fix socket data_ready events When a skb verdict program is in-use and either another BPF program redirects to that socket or the new SK_PASS support is used the data_ready callback does not wake up application. Instead because the stream parser/verdict is using the sk data_ready callback we wake up the stream parser/verdict block. Fix this by adding a helper to check if the stream parser block is enabled on the sk and if so call the saved pointer which is the upper layers wake up function. This fixes application stalls observed when an application is waiting for data in a blocking read(). Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 22:35:33 +03:00
sk_psock_data_ready(sk, psock);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
return copied;
}
static int sk_psock_handle_skb(struct sk_psock *psock, struct sk_buff *skb,
u32 off, u32 len, bool ingress)
{
bpf, sockmap: Remove dropped data on errors in redirect case In the sk_skb redirect case we didn't handle the case where we overrun the sk_rmem_alloc entry on ingress redirect or sk_wmem_alloc on egress. Because we didn't have anything implemented we simply dropped the skb. This meant data could be dropped if socket memory accounting was in place. This fixes the above dropped data case by moving the memory checks later in the code where we actually do the send or recv. This pushes those checks into the workqueue and allows us to return an EAGAIN error which in turn allows us to try again later from the workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226863689.5692.13861422742592309285.stgit@john-Precision-5820-Tower
2020-10-09 21:37:17 +03:00
if (!ingress) {
if (!sock_writeable(psock->sk))
return -EAGAIN;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
return skb_send_sock_locked(psock->sk, skb, off, len);
bpf, sockmap: Remove dropped data on errors in redirect case In the sk_skb redirect case we didn't handle the case where we overrun the sk_rmem_alloc entry on ingress redirect or sk_wmem_alloc on egress. Because we didn't have anything implemented we simply dropped the skb. This meant data could be dropped if socket memory accounting was in place. This fixes the above dropped data case by moving the memory checks later in the code where we actually do the send or recv. This pushes those checks into the workqueue and allows us to return an EAGAIN error which in turn allows us to try again later from the workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226863689.5692.13861422742592309285.stgit@john-Precision-5820-Tower
2020-10-09 21:37:17 +03:00
}
return sk_psock_skb_ingress(psock, skb);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
}
static void sk_psock_backlog(struct work_struct *work)
{
struct sk_psock *psock = container_of(work, struct sk_psock, work);
struct sk_psock_work_state *state = &psock->work_state;
struct sk_buff *skb;
bool ingress;
u32 len, off;
int ret;
/* Lock sock to avoid losing sk_socket during loop. */
lock_sock(psock->sk);
if (state->skb) {
skb = state->skb;
len = state->len;
off = state->off;
state->skb = NULL;
goto start;
}
while ((skb = skb_dequeue(&psock->ingress_skb))) {
len = skb->len;
off = 0;
start:
ingress = tcp_skb_bpf_ingress(skb);
do {
ret = -EIO;
if (likely(psock->sk->sk_socket))
ret = sk_psock_handle_skb(psock, skb, off,
len, ingress);
if (ret <= 0) {
if (ret == -EAGAIN) {
state->skb = skb;
state->len = len;
state->off = off;
goto end;
}
/* Hard errors break pipe and stop xmit. */
sk_psock_report_error(psock, ret ? -ret : EPIPE);
sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
kfree_skb(skb);
goto end;
}
off += ret;
len -= ret;
} while (len);
if (!ingress)
kfree_skb(skb);
}
end:
release_sock(psock->sk);
}
struct sk_psock *sk_psock_init(struct sock *sk, int node)
{
net: sk_msg: Simplify sk_psock initialization Initializing psock->sk_proto and other saved callbacks is only done in sk_psock_update_proto, after sk_psock_init has returned. The logic for this is difficult to follow, and needlessly complex. Instead, initialize psock->sk_proto whenever we allocate a new psock. Additionally, assert the following invariants: * The SK has no ULP: ULP does it's own finagling of sk->sk_prot * sk_user_data is unused: we need it to store sk_psock Protect our access to sk_user_data with sk_callback_lock, which is what other users like reuseport arrays, etc. do. The result is that an sk_psock is always fully initialized, and that psock->sk_proto is always the "original" struct proto. The latter allows us to use psock->sk_proto when initializing IPv6 TCP / UDP callbacks for sockmap. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200821102948.21918-2-lmb@cloudflare.com
2020-08-21 13:29:43 +03:00
struct sk_psock *psock;
struct proto *prot;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
net: sk_msg: Simplify sk_psock initialization Initializing psock->sk_proto and other saved callbacks is only done in sk_psock_update_proto, after sk_psock_init has returned. The logic for this is difficult to follow, and needlessly complex. Instead, initialize psock->sk_proto whenever we allocate a new psock. Additionally, assert the following invariants: * The SK has no ULP: ULP does it's own finagling of sk->sk_prot * sk_user_data is unused: we need it to store sk_psock Protect our access to sk_user_data with sk_callback_lock, which is what other users like reuseport arrays, etc. do. The result is that an sk_psock is always fully initialized, and that psock->sk_proto is always the "original" struct proto. The latter allows us to use psock->sk_proto when initializing IPv6 TCP / UDP callbacks for sockmap. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200821102948.21918-2-lmb@cloudflare.com
2020-08-21 13:29:43 +03:00
write_lock_bh(&sk->sk_callback_lock);
if (inet_csk_has_ulp(sk)) {
psock = ERR_PTR(-EINVAL);
goto out;
}
if (sk->sk_user_data) {
psock = ERR_PTR(-EBUSY);
goto out;
}
psock = kzalloc_node(sizeof(*psock), GFP_ATOMIC | __GFP_NOWARN, node);
if (!psock) {
psock = ERR_PTR(-ENOMEM);
goto out;
}
prot = READ_ONCE(sk->sk_prot);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
psock->sk = sk;
net: sk_msg: Simplify sk_psock initialization Initializing psock->sk_proto and other saved callbacks is only done in sk_psock_update_proto, after sk_psock_init has returned. The logic for this is difficult to follow, and needlessly complex. Instead, initialize psock->sk_proto whenever we allocate a new psock. Additionally, assert the following invariants: * The SK has no ULP: ULP does it's own finagling of sk->sk_prot * sk_user_data is unused: we need it to store sk_psock Protect our access to sk_user_data with sk_callback_lock, which is what other users like reuseport arrays, etc. do. The result is that an sk_psock is always fully initialized, and that psock->sk_proto is always the "original" struct proto. The latter allows us to use psock->sk_proto when initializing IPv6 TCP / UDP callbacks for sockmap. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200821102948.21918-2-lmb@cloudflare.com
2020-08-21 13:29:43 +03:00
psock->eval = __SK_NONE;
psock->sk_proto = prot;
psock->saved_unhash = prot->unhash;
psock->saved_close = prot->close;
psock->saved_write_space = sk->sk_write_space;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
INIT_LIST_HEAD(&psock->link);
spin_lock_init(&psock->link_lock);
INIT_WORK(&psock->work, sk_psock_backlog);
INIT_LIST_HEAD(&psock->ingress_msg);
skb_queue_head_init(&psock->ingress_skb);
sk_psock_set_state(psock, SK_PSOCK_TX_ENABLED);
refcount_set(&psock->refcnt, 1);
net, sk_msg: Clear sk_user_data pointer on clone if tagged sk_user_data can hold a pointer to an object that is not intended to be shared between the parent socket and the child that gets a pointer copy on clone. This is the case when sk_user_data points at reference-counted object, like struct sk_psock. One way to resolve it is to tag the pointer with a no-copy flag by repurposing its lowest bit. Based on the bit-flag value we clear the child sk_user_data pointer after cloning the parent socket. The no-copy flag is stored in the pointer itself as opposed to externally, say in socket flags, to guarantee that the pointer and the flag are copied from parent to child socket in an atomic fashion. Parent socket state is subject to change while copying, we don't hold any locks at that time. This approach relies on an assumption that sk_user_data holds a pointer to an object aligned at least 2 bytes. A manual audit of existing users of rcu_dereference_sk_user_data helper confirms our assumption. Also, an RCU-protected sk_user_data is not likely to hold a pointer to a char value or a pathological case of "struct { char c; }". To be safe, warn when the flag-bit is set when setting sk_user_data to catch any future misuses. It is worth considering why clearing sk_user_data unconditionally is not an option. There exist users, DRBD, NVMe, and Xen drivers being among them, that rely on the pointer being copied when cloning the listening socket. Potentially we could distinguish these users by checking if the listening socket has been created in kernel-space via sock_create_kern, and hence has sk_kern_sock flag set. However, this is not the case for NVMe and Xen drivers, which create sockets without marking them as belonging to the kernel. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200218171023.844439-3-jakub@cloudflare.com
2020-02-18 20:10:14 +03:00
rcu_assign_sk_user_data_nocopy(sk, psock);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
sock_hold(sk);
net: sk_msg: Simplify sk_psock initialization Initializing psock->sk_proto and other saved callbacks is only done in sk_psock_update_proto, after sk_psock_init has returned. The logic for this is difficult to follow, and needlessly complex. Instead, initialize psock->sk_proto whenever we allocate a new psock. Additionally, assert the following invariants: * The SK has no ULP: ULP does it's own finagling of sk->sk_prot * sk_user_data is unused: we need it to store sk_psock Protect our access to sk_user_data with sk_callback_lock, which is what other users like reuseport arrays, etc. do. The result is that an sk_psock is always fully initialized, and that psock->sk_proto is always the "original" struct proto. The latter allows us to use psock->sk_proto when initializing IPv6 TCP / UDP callbacks for sockmap. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200821102948.21918-2-lmb@cloudflare.com
2020-08-21 13:29:43 +03:00
out:
write_unlock_bh(&sk->sk_callback_lock);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
return psock;
}
EXPORT_SYMBOL_GPL(sk_psock_init);
struct sk_psock_link *sk_psock_link_pop(struct sk_psock *psock)
{
struct sk_psock_link *link;
spin_lock_bh(&psock->link_lock);
link = list_first_entry_or_null(&psock->link, struct sk_psock_link,
list);
if (link)
list_del(&link->list);
spin_unlock_bh(&psock->link_lock);
return link;
}
void __sk_psock_purge_ingress_msg(struct sk_psock *psock)
{
struct sk_msg *msg, *tmp;
list_for_each_entry_safe(msg, tmp, &psock->ingress_msg, list) {
list_del(&msg->list);
sk_msg_free(psock->sk, msg);
kfree(msg);
}
}
static void sk_psock_zap_ingress(struct sk_psock *psock)
{
__skb_queue_purge(&psock->ingress_skb);
__sk_psock_purge_ingress_msg(psock);
}
static void sk_psock_link_destroy(struct sk_psock *psock)
{
struct sk_psock_link *link, *tmp;
list_for_each_entry_safe(link, tmp, &psock->link, list) {
list_del(&link->list);
sk_psock_free_link(link);
}
}
static void sk_psock_destroy_deferred(struct work_struct *gc)
{
struct sk_psock *psock = container_of(gc, struct sk_psock, gc);
/* No sk_callback_lock since already detached. */
bpf: sockmap, only stop/flush strp if it was enabled at some point If we try to call strp_done on a parser that has never been initialized, because the sockmap user is only using TX side for example we get the following error. [ 883.422081] WARNING: CPU: 1 PID: 208 at kernel/workqueue.c:3030 __flush_work+0x1ca/0x1e0 ... [ 883.422095] Workqueue: events sk_psock_destroy_deferred [ 883.422097] RIP: 0010:__flush_work+0x1ca/0x1e0 This had been wrapped in a 'if (psock->parser.enabled)' logic which was broken because the strp_done() was never actually being called because we do a strp_stop() earlier in the tear down logic will set parser.enabled to false. This could result in a use after free if work was still in the queue and was resolved by the patch here, 1d79895aef18f ("sk_msg: Always cancel strp work before freeing the psock"). However, calling strp_stop(), done by the patch marked in the fixes tag, only is useful if we never initialized a strp parser program and never initialized the strp to start with. Because if we had initialized a stream parser strp_stop() would have been called by sk_psock_drop() earlier in the tear down process. By forcing the strp to stop we get past the WARNING in strp_done that checks the stopped flag but calling cancel_work_sync on work that has never been initialized is also wrong and generates the warning above. To fix check if the parser program exists. If the program exists then the strp work has been initialized and must be sync'd and cancelled before free'ing any structures. If no program exists we never initialized the stream parser in the first place so skip the sync/cancel logic implemented by strp_done. Finally, remove the strp_done its not needed and in the case where we are using the stream parser has already been called. Fixes: e8e3437762ad9 ("bpf: Stop the psock parser before canceling its work") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-13 17:19:19 +03:00
/* Parser has been stopped */
if (psock->progs.skb_parser)
strp_done(&psock->parser.strp);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
cancel_work_sync(&psock->work);
psock_progs_drop(&psock->progs);
sk_psock_link_destroy(psock);
sk_psock_cork_free(psock);
sk_psock_zap_ingress(psock);
if (psock->sk_redir)
sock_put(psock->sk_redir);
sock_put(psock->sk);
kfree(psock);
}
void sk_psock_destroy(struct rcu_head *rcu)
{
struct sk_psock *psock = container_of(rcu, struct sk_psock, rcu);
INIT_WORK(&psock->gc, sk_psock_destroy_deferred);
schedule_work(&psock->gc);
}
EXPORT_SYMBOL_GPL(sk_psock_destroy);
void sk_psock_drop(struct sock *sk, struct sk_psock *psock)
{
sk_psock_cork_free(psock);
bpf: sk_msg, zap ingress queue on psock down In addition to releasing any cork'ed data on a psock when the psock is removed we should also release any skb's in the ingress work queue. Otherwise the skb's eventually get free'd but late in the tear down process so we see the WARNING due to non-zero sk_forward_alloc. void sk_stream_kill_queues(struct sock *sk) { ... WARN_ON(sk->sk_forward_alloc); ... } Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 22:35:34 +03:00
sk_psock_zap_ingress(psock);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
write_lock_bh(&sk->sk_callback_lock);
bpf: sockmap/tls, close can race with map free When a map free is called and in parallel a socket is closed we have two paths that can potentially reset the socket prot ops, the bpf close() path and the map free path. This creates a problem with which prot ops should be used from the socket closed side. If the map_free side completes first then we want to call the original lowest level ops. However, if the tls path runs first we want to call the sockmap ops. Additionally there was no locking around prot updates in TLS code paths so the prot ops could be changed multiple times once from TLS path and again from sockmap side potentially leaving ops pointed at either TLS or sockmap when psock and/or tls context have already been destroyed. To fix this race first only update ops inside callback lock so that TLS, sockmap and lowest level all agree on prot state. Second and a ULP callback update() so that lower layers can inform the upper layer when they are being removed allowing the upper layer to reset prot ops. This gets us close to allowing sockmap and tls to be stacked in arbitrary order but will save that patch for *next trees. v4: - make sure we don't free things for device; - remove the checks which swap the callbacks back only if TLS is at the top. Reported-by: syzbot+06537213db7ba2745c4a@syzkaller.appspotmail.com Fixes: 02c558b2d5d6 ("bpf: sockmap, support for msg_peek in sk_msg with redirect ingress") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-19 20:29:22 +03:00
sk_psock_restore_proto(sk, psock);
rcu_assign_sk_user_data(sk, NULL);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
if (psock->progs.skb_parser)
sk_psock_stop_strp(sk, psock);
bpf, sockmap: Allow skipping sk_skb parser program Currently, we often run with a nop parser namely one that just does this, 'return skb->len'. This happens when either our verdict program can handle streaming data or it is only looking at socket data such as IP addresses and other metadata associated with the flow. The second case is common for a L3/L4 proxy for instance. So lets allow loading programs without the parser then we can skip the stream parser logic and avoid having to add a BPF program that is effectively a nop. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160239297866.8495.13345662302749219672.stgit@john-Precision-5820-Tower
2020-10-11 08:09:38 +03:00
else if (psock->progs.skb_verdict)
sk_psock_stop_verdict(sk, psock);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
write_unlock_bh(&sk->sk_callback_lock);
sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
net/core/skmsg: Replace call_rcu_sched() with call_rcu() Now that call_rcu()'s callback is not invoked until after all preempt-disable regions of code have completed (in addition to explicitly marked RCU read-side critical sections), call_rcu() can be used in place of call_rcu_sched(). This commit therefore makes that change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: <netdev@vger.kernel.org>
2018-11-08 02:09:25 +03:00
call_rcu(&psock->rcu, sk_psock_destroy);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
}
EXPORT_SYMBOL_GPL(sk_psock_drop);
static int sk_psock_map_verd(int verdict, bool redir)
{
switch (verdict) {
case SK_PASS:
return redir ? __SK_REDIRECT : __SK_PASS;
case SK_DROP:
default:
break;
}
return __SK_DROP;
}
int sk_psock_msg_verdict(struct sock *sk, struct sk_psock *psock,
struct sk_msg *msg)
{
struct bpf_prog *prog;
int ret;
rcu_read_lock();
prog = READ_ONCE(psock->progs.msg_parser);
if (unlikely(!prog)) {
ret = __SK_PASS;
goto out;
}
sk_msg_compute_data_pointers(msg);
msg->sk = sk;
bpf: Use bpf_prog_run_pin_on_cpu() at simple call sites. All of these cases are strictly of the form: preempt_disable(); BPF_PROG_RUN(...); preempt_enable(); Replace this with bpf_prog_run_pin_on_cpu() which wraps BPF_PROG_RUN() with: migrate_disable(); BPF_PROG_RUN(...); migrate_enable(); On non RT enabled kernels this maps to preempt_disable/enable() and on RT enabled kernels this solely prevents migration, which is sufficient as there is no requirement to prevent reentrancy to any BPF program from a preempting task. The only requirement is that the program stays on the same CPU. Therefore, this is a trivially correct transformation. The seccomp loop does not need protection over the loop. It only needs protection per BPF filter program [ tglx: Converted to bpf_prog_run_pin_on_cpu() ] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200224145643.691493094@linutronix.de
2020-02-24 17:01:43 +03:00
ret = bpf_prog_run_pin_on_cpu(prog, msg);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
ret = sk_psock_map_verd(ret, msg->sk_redir);
psock->apply_bytes = msg->apply_bytes;
if (ret == __SK_REDIRECT) {
if (psock->sk_redir)
sock_put(psock->sk_redir);
psock->sk_redir = msg->sk_redir;
if (!psock->sk_redir) {
ret = __SK_DROP;
goto out;
}
sock_hold(psock->sk_redir);
}
out:
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(sk_psock_msg_verdict);
static int sk_psock_bpf_run(struct sk_psock *psock, struct bpf_prog *prog,
struct sk_buff *skb)
{
bpf_compute_data_end_sk_skb(skb);
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
return bpf_prog_run_pin_on_cpu(prog, skb);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
}
static struct sk_psock *sk_psock_from_strp(struct strparser *strp)
{
struct sk_psock_parser *parser;
parser = container_of(strp, struct sk_psock_parser, strp);
return container_of(parser, struct sk_psock, parser);
}
bpf, sockmap: RCU splat with redirect and strparser error or TLS There are two paths to generate the below RCU splat the first and most obvious is the result of the BPF verdict program issuing a redirect on a TLS socket (This is the splat shown below). Unlike the non-TLS case the caller of the *strp_read() hooks does not wrap the call in a rcu_read_lock/unlock. Then if the BPF program issues a redirect action we hit the RCU splat. However, in the non-TLS socket case the splat appears to be relatively rare, because the skmsg caller into the strp_data_ready() is wrapped in a rcu_read_lock/unlock. Shown here, static void sk_psock_strp_data_ready(struct sock *sk) { struct sk_psock *psock; rcu_read_lock(); psock = sk_psock(sk); if (likely(psock)) { if (tls_sw_has_ctx_rx(sk)) { psock->parser.saved_data_ready(sk); } else { write_lock_bh(&sk->sk_callback_lock); strp_data_ready(&psock->parser.strp); write_unlock_bh(&sk->sk_callback_lock); } } rcu_read_unlock(); } If the above was the only way to run the verdict program we would be safe. But, there is a case where the strparser may throw an ENOMEM error while parsing the skb. This is a result of a failed skb_clone, or alloc_skb_for_msg while building a new merged skb when the msg length needed spans multiple skbs. This will in turn put the skb on the strp_wrk workqueue in the strparser code. The skb will later be dequeued and verdict programs run, but now from a different context without the rcu_read_lock()/unlock() critical section in sk_psock_strp_data_ready() shown above. In practice I have not seen this yet, because as far as I know most users of the verdict programs are also only working on single skbs. In this case no merge happens which could trigger the above ENOMEM errors. In addition the system would need to be under memory pressure. For example, we can't hit the above case in selftests because we missed having tests to merge skbs. (Added in later patch) To fix the below splat extend the rcu_read_lock/unnlock block to include the call to sk_psock_tls_verdict_apply(). This will fix both TLS redirect case and non-TLS redirect+error case. Also remove psock from the sk_psock_tls_verdict_apply() function signature its not used there. [ 1095.937597] WARNING: suspicious RCU usage [ 1095.940964] 5.7.0-rc7-02911-g463bac5f1ca79 #1 Tainted: G W [ 1095.944363] ----------------------------- [ 1095.947384] include/linux/skmsg.h:284 suspicious rcu_dereference_check() usage! [ 1095.950866] [ 1095.950866] other info that might help us debug this: [ 1095.950866] [ 1095.957146] [ 1095.957146] rcu_scheduler_active = 2, debug_locks = 1 [ 1095.961482] 1 lock held by test_sockmap/15970: [ 1095.964501] #0: ffff9ea6b25de660 (sk_lock-AF_INET){+.+.}-{0:0}, at: tls_sw_recvmsg+0x13a/0x840 [tls] [ 1095.968568] [ 1095.968568] stack backtrace: [ 1095.975001] CPU: 1 PID: 15970 Comm: test_sockmap Tainted: G W 5.7.0-rc7-02911-g463bac5f1ca79 #1 [ 1095.977883] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 1095.980519] Call Trace: [ 1095.982191] dump_stack+0x8f/0xd0 [ 1095.984040] sk_psock_skb_redirect+0xa6/0xf0 [ 1095.986073] sk_psock_tls_strp_read+0x1d8/0x250 [ 1095.988095] tls_sw_recvmsg+0x714/0x840 [tls] v2: Improve commit message to identify non-TLS redirect plus error case condition as well as more common TLS case. In the process I decided doing the rcu_read_unlock followed by the lock/unlock inside branches was unnecessarily complex. We can just extend the current rcu block and get the same effeective without the shuffling and branching. Thanks Martin! Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls") Reported-by: Jakub Sitnicki <jakub@cloudflare.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/159312677907.18340.11064813152758406626.stgit@john-XPS-13-9370
2020-06-26 02:12:59 +03:00
static void sk_psock_skb_redirect(struct sk_buff *skb)
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
{
struct sk_psock *psock_other;
struct sock *sk_other;
bpf: Refactor sockmap redirect code so its easy to reuse We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:41 +03:00
sk_other = tcp_skb_bpf_redirect_fetch(skb);
bpf, sockmap: Remove dropped data on errors in redirect case In the sk_skb redirect case we didn't handle the case where we overrun the sk_rmem_alloc entry on ingress redirect or sk_wmem_alloc on egress. Because we didn't have anything implemented we simply dropped the skb. This meant data could be dropped if socket memory accounting was in place. This fixes the above dropped data case by moving the memory checks later in the code where we actually do the send or recv. This pushes those checks into the workqueue and allows us to return an EAGAIN error which in turn allows us to try again later from the workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226863689.5692.13861422742592309285.stgit@john-Precision-5820-Tower
2020-10-09 21:37:17 +03:00
/* This error is a buggy BPF program, it returned a redirect
* return code, but then didn't set a redirect interface.
*/
bpf: Refactor sockmap redirect code so its easy to reuse We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:41 +03:00
if (unlikely(!sk_other)) {
kfree_skb(skb);
return;
}
psock_other = sk_psock(sk_other);
bpf, sockmap: Remove dropped data on errors in redirect case In the sk_skb redirect case we didn't handle the case where we overrun the sk_rmem_alloc entry on ingress redirect or sk_wmem_alloc on egress. Because we didn't have anything implemented we simply dropped the skb. This meant data could be dropped if socket memory accounting was in place. This fixes the above dropped data case by moving the memory checks later in the code where we actually do the send or recv. This pushes those checks into the workqueue and allows us to return an EAGAIN error which in turn allows us to try again later from the workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226863689.5692.13861422742592309285.stgit@john-Precision-5820-Tower
2020-10-09 21:37:17 +03:00
/* This error indicates the socket is being torn down or had another
* error that caused the pipe to break. We can't send a packet on
* a socket that is in this state so we drop the skb.
*/
bpf: Refactor sockmap redirect code so its easy to reuse We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:41 +03:00
if (!psock_other || sock_flag(sk_other, SOCK_DEAD) ||
!sk_psock_test_state(psock_other, SK_PSOCK_TX_ENABLED)) {
kfree_skb(skb);
return;
}
bpf, sockmap: Remove dropped data on errors in redirect case In the sk_skb redirect case we didn't handle the case where we overrun the sk_rmem_alloc entry on ingress redirect or sk_wmem_alloc on egress. Because we didn't have anything implemented we simply dropped the skb. This meant data could be dropped if socket memory accounting was in place. This fixes the above dropped data case by moving the memory checks later in the code where we actually do the send or recv. This pushes those checks into the workqueue and allows us to return an EAGAIN error which in turn allows us to try again later from the workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226863689.5692.13861422742592309285.stgit@john-Precision-5820-Tower
2020-10-09 21:37:17 +03:00
skb_queue_tail(&psock_other->ingress_skb, skb);
schedule_work(&psock_other->work);
bpf: Refactor sockmap redirect code so its easy to reuse We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:41 +03:00
}
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
static void sk_psock_tls_verdict_apply(struct sk_buff *skb, struct sock *sk, int verdict)
bpf: Fix running sk_skb program types with ktls KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:59 +03:00
{
switch (verdict) {
case __SK_REDIRECT:
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
skb_set_owner_r(skb, sk);
bpf, sockmap: RCU splat with redirect and strparser error or TLS There are two paths to generate the below RCU splat the first and most obvious is the result of the BPF verdict program issuing a redirect on a TLS socket (This is the splat shown below). Unlike the non-TLS case the caller of the *strp_read() hooks does not wrap the call in a rcu_read_lock/unlock. Then if the BPF program issues a redirect action we hit the RCU splat. However, in the non-TLS socket case the splat appears to be relatively rare, because the skmsg caller into the strp_data_ready() is wrapped in a rcu_read_lock/unlock. Shown here, static void sk_psock_strp_data_ready(struct sock *sk) { struct sk_psock *psock; rcu_read_lock(); psock = sk_psock(sk); if (likely(psock)) { if (tls_sw_has_ctx_rx(sk)) { psock->parser.saved_data_ready(sk); } else { write_lock_bh(&sk->sk_callback_lock); strp_data_ready(&psock->parser.strp); write_unlock_bh(&sk->sk_callback_lock); } } rcu_read_unlock(); } If the above was the only way to run the verdict program we would be safe. But, there is a case where the strparser may throw an ENOMEM error while parsing the skb. This is a result of a failed skb_clone, or alloc_skb_for_msg while building a new merged skb when the msg length needed spans multiple skbs. This will in turn put the skb on the strp_wrk workqueue in the strparser code. The skb will later be dequeued and verdict programs run, but now from a different context without the rcu_read_lock()/unlock() critical section in sk_psock_strp_data_ready() shown above. In practice I have not seen this yet, because as far as I know most users of the verdict programs are also only working on single skbs. In this case no merge happens which could trigger the above ENOMEM errors. In addition the system would need to be under memory pressure. For example, we can't hit the above case in selftests because we missed having tests to merge skbs. (Added in later patch) To fix the below splat extend the rcu_read_lock/unnlock block to include the call to sk_psock_tls_verdict_apply(). This will fix both TLS redirect case and non-TLS redirect+error case. Also remove psock from the sk_psock_tls_verdict_apply() function signature its not used there. [ 1095.937597] WARNING: suspicious RCU usage [ 1095.940964] 5.7.0-rc7-02911-g463bac5f1ca79 #1 Tainted: G W [ 1095.944363] ----------------------------- [ 1095.947384] include/linux/skmsg.h:284 suspicious rcu_dereference_check() usage! [ 1095.950866] [ 1095.950866] other info that might help us debug this: [ 1095.950866] [ 1095.957146] [ 1095.957146] rcu_scheduler_active = 2, debug_locks = 1 [ 1095.961482] 1 lock held by test_sockmap/15970: [ 1095.964501] #0: ffff9ea6b25de660 (sk_lock-AF_INET){+.+.}-{0:0}, at: tls_sw_recvmsg+0x13a/0x840 [tls] [ 1095.968568] [ 1095.968568] stack backtrace: [ 1095.975001] CPU: 1 PID: 15970 Comm: test_sockmap Tainted: G W 5.7.0-rc7-02911-g463bac5f1ca79 #1 [ 1095.977883] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 1095.980519] Call Trace: [ 1095.982191] dump_stack+0x8f/0xd0 [ 1095.984040] sk_psock_skb_redirect+0xa6/0xf0 [ 1095.986073] sk_psock_tls_strp_read+0x1d8/0x250 [ 1095.988095] tls_sw_recvmsg+0x714/0x840 [tls] v2: Improve commit message to identify non-TLS redirect plus error case condition as well as more common TLS case. In the process I decided doing the rcu_read_unlock followed by the lock/unlock inside branches was unnecessarily complex. We can just extend the current rcu block and get the same effeective without the shuffling and branching. Thanks Martin! Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls") Reported-by: Jakub Sitnicki <jakub@cloudflare.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/159312677907.18340.11064813152758406626.stgit@john-XPS-13-9370
2020-06-26 02:12:59 +03:00
sk_psock_skb_redirect(skb);
bpf: Fix running sk_skb program types with ktls KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:59 +03:00
break;
case __SK_PASS:
case __SK_DROP:
default:
break;
}
}
int sk_psock_tls_strp_read(struct sk_psock *psock, struct sk_buff *skb)
{
struct bpf_prog *prog;
int ret = __SK_PASS;
rcu_read_lock();
prog = READ_ONCE(psock->progs.skb_verdict);
if (likely(prog)) {
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
/* We skip full set_owner_r here because if we do a SK_PASS
* or SK_DROP we can skip skb memory accounting and use the
* TLS context.
*/
skb->sk = psock->sk;
bpf: Fix running sk_skb program types with ktls KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:59 +03:00
tcp_skb_bpf_redirect_clear(skb);
ret = sk_psock_bpf_run(psock, prog, skb);
ret = sk_psock_map_verd(ret, tcp_skb_bpf_redirect_fetch(skb));
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
skb->sk = NULL;
bpf: Fix running sk_skb program types with ktls KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:59 +03:00
}
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
sk_psock_tls_verdict_apply(skb, psock->sk, ret);
bpf: Fix running sk_skb program types with ktls KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:59 +03:00
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL_GPL(sk_psock_tls_strp_read);
bpf: Refactor sockmap redirect code so its easy to reuse We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:41 +03:00
static void sk_psock_verdict_apply(struct sk_psock *psock,
struct sk_buff *skb, int verdict)
{
bpf, sockmap: Skb verdict SK_PASS to self already checked rmem limits For sk_skb case where skb_verdict program returns SK_PASS to continue to pass packet up the stack, the memory limits were already checked before enqueuing in skb_queue_tail from TCP side. So, lets remove the extra checks here. The theory is if the TCP stack believes we have memory to receive the packet then lets trust the stack and not double check the limits. In fact the accounting here can cause a drop if sk_rmem_alloc has increased after the stack accepted this packet, but before the duplicate check here. And worse if this happens because TCP stack already believes the data has been received there is no retransmit. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226857664.5692.668205469388498375.stgit@john-Precision-5820-Tower
2020-10-09 21:36:16 +03:00
struct tcp_skb_cb *tcp;
bpf: Refactor sockmap redirect code so its easy to reuse We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:41 +03:00
struct sock *sk_other;
bpf, sockmap: On receive programs try to fast track SK_PASS ingress When we receive an skb and the ingress skb verdict program returns SK_PASS we currently set the ingress flag and put it on the workqueue so it can be turned into a sk_msg and put on the sk_msg ingress queue. Then finally telling userspace with data_ready hook. Here we observe that if the workqueue is empty then we can try to convert into a sk_msg type and call data_ready directly without bouncing through a workqueue. Its a common pattern to have a recv verdict program for visibility that always returns SK_PASS. In this case unless there is an ENOMEM error or we overrun the socket we can avoid the workqueue completely only using it when we fall back to error cases caused by memory pressure. By doing this we eliminate another case where data may be dropped if errors occur on memory limits in workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226859704.5692.12929678876744977669.stgit@john-Precision-5820-Tower
2020-10-09 21:36:37 +03:00
int err = -EIO;
bpf: Refactor sockmap redirect code so its easy to reuse We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:41 +03:00
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
switch (verdict) {
bpf: skb_verdict, support SK_PASS on RX BPF path Add SK_PASS verdict support to SK_SKB_VERDICT programs. Now that support for redirects exists we can implement SK_PASS as a redirect to the same socket. This simplifies the BPF programs and avoids an extra map lookup on RX path for simple visibility cases. Further, reduces user (BPF programmer in this context) confusion when their program drops skb due to lack of support. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 22:35:32 +03:00
case __SK_PASS:
sk_other = psock->sk;
if (sock_flag(sk_other, SOCK_DEAD) ||
!sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED)) {
goto out_free;
}
bpf, sockmap: Skb verdict SK_PASS to self already checked rmem limits For sk_skb case where skb_verdict program returns SK_PASS to continue to pass packet up the stack, the memory limits were already checked before enqueuing in skb_queue_tail from TCP side. So, lets remove the extra checks here. The theory is if the TCP stack believes we have memory to receive the packet then lets trust the stack and not double check the limits. In fact the accounting here can cause a drop if sk_rmem_alloc has increased after the stack accepted this packet, but before the duplicate check here. And worse if this happens because TCP stack already believes the data has been received there is no retransmit. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226857664.5692.668205469388498375.stgit@john-Precision-5820-Tower
2020-10-09 21:36:16 +03:00
tcp = TCP_SKB_CB(skb);
tcp->bpf.flags |= BPF_F_INGRESS;
bpf, sockmap: On receive programs try to fast track SK_PASS ingress When we receive an skb and the ingress skb verdict program returns SK_PASS we currently set the ingress flag and put it on the workqueue so it can be turned into a sk_msg and put on the sk_msg ingress queue. Then finally telling userspace with data_ready hook. Here we observe that if the workqueue is empty then we can try to convert into a sk_msg type and call data_ready directly without bouncing through a workqueue. Its a common pattern to have a recv verdict program for visibility that always returns SK_PASS. In this case unless there is an ENOMEM error or we overrun the socket we can avoid the workqueue completely only using it when we fall back to error cases caused by memory pressure. By doing this we eliminate another case where data may be dropped if errors occur on memory limits in workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226859704.5692.12929678876744977669.stgit@john-Precision-5820-Tower
2020-10-09 21:36:37 +03:00
/* If the queue is empty then we can submit directly
* into the msg queue. If its not empty we have to
* queue work otherwise we may get OOO data. Otherwise,
* if sk_psock_skb_ingress errors will be handled by
* retrying later from workqueue.
*/
if (skb_queue_empty(&psock->ingress_skb)) {
err = sk_psock_skb_ingress(psock, skb);
}
if (err < 0) {
skb_queue_tail(&psock->ingress_skb, skb);
schedule_work(&psock->work);
}
bpf, sockmap: Skb verdict SK_PASS to self already checked rmem limits For sk_skb case where skb_verdict program returns SK_PASS to continue to pass packet up the stack, the memory limits were already checked before enqueuing in skb_queue_tail from TCP side. So, lets remove the extra checks here. The theory is if the TCP stack believes we have memory to receive the packet then lets trust the stack and not double check the limits. In fact the accounting here can cause a drop if sk_rmem_alloc has increased after the stack accepted this packet, but before the duplicate check here. And worse if this happens because TCP stack already believes the data has been received there is no retransmit. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226857664.5692.668205469388498375.stgit@john-Precision-5820-Tower
2020-10-09 21:36:16 +03:00
break;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
case __SK_REDIRECT:
bpf, sockmap: RCU splat with redirect and strparser error or TLS There are two paths to generate the below RCU splat the first and most obvious is the result of the BPF verdict program issuing a redirect on a TLS socket (This is the splat shown below). Unlike the non-TLS case the caller of the *strp_read() hooks does not wrap the call in a rcu_read_lock/unlock. Then if the BPF program issues a redirect action we hit the RCU splat. However, in the non-TLS socket case the splat appears to be relatively rare, because the skmsg caller into the strp_data_ready() is wrapped in a rcu_read_lock/unlock. Shown here, static void sk_psock_strp_data_ready(struct sock *sk) { struct sk_psock *psock; rcu_read_lock(); psock = sk_psock(sk); if (likely(psock)) { if (tls_sw_has_ctx_rx(sk)) { psock->parser.saved_data_ready(sk); } else { write_lock_bh(&sk->sk_callback_lock); strp_data_ready(&psock->parser.strp); write_unlock_bh(&sk->sk_callback_lock); } } rcu_read_unlock(); } If the above was the only way to run the verdict program we would be safe. But, there is a case where the strparser may throw an ENOMEM error while parsing the skb. This is a result of a failed skb_clone, or alloc_skb_for_msg while building a new merged skb when the msg length needed spans multiple skbs. This will in turn put the skb on the strp_wrk workqueue in the strparser code. The skb will later be dequeued and verdict programs run, but now from a different context without the rcu_read_lock()/unlock() critical section in sk_psock_strp_data_ready() shown above. In practice I have not seen this yet, because as far as I know most users of the verdict programs are also only working on single skbs. In this case no merge happens which could trigger the above ENOMEM errors. In addition the system would need to be under memory pressure. For example, we can't hit the above case in selftests because we missed having tests to merge skbs. (Added in later patch) To fix the below splat extend the rcu_read_lock/unnlock block to include the call to sk_psock_tls_verdict_apply(). This will fix both TLS redirect case and non-TLS redirect+error case. Also remove psock from the sk_psock_tls_verdict_apply() function signature its not used there. [ 1095.937597] WARNING: suspicious RCU usage [ 1095.940964] 5.7.0-rc7-02911-g463bac5f1ca79 #1 Tainted: G W [ 1095.944363] ----------------------------- [ 1095.947384] include/linux/skmsg.h:284 suspicious rcu_dereference_check() usage! [ 1095.950866] [ 1095.950866] other info that might help us debug this: [ 1095.950866] [ 1095.957146] [ 1095.957146] rcu_scheduler_active = 2, debug_locks = 1 [ 1095.961482] 1 lock held by test_sockmap/15970: [ 1095.964501] #0: ffff9ea6b25de660 (sk_lock-AF_INET){+.+.}-{0:0}, at: tls_sw_recvmsg+0x13a/0x840 [tls] [ 1095.968568] [ 1095.968568] stack backtrace: [ 1095.975001] CPU: 1 PID: 15970 Comm: test_sockmap Tainted: G W 5.7.0-rc7-02911-g463bac5f1ca79 #1 [ 1095.977883] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 1095.980519] Call Trace: [ 1095.982191] dump_stack+0x8f/0xd0 [ 1095.984040] sk_psock_skb_redirect+0xa6/0xf0 [ 1095.986073] sk_psock_tls_strp_read+0x1d8/0x250 [ 1095.988095] tls_sw_recvmsg+0x714/0x840 [tls] v2: Improve commit message to identify non-TLS redirect plus error case condition as well as more common TLS case. In the process I decided doing the rcu_read_unlock followed by the lock/unlock inside branches was unnecessarily complex. We can just extend the current rcu block and get the same effeective without the shuffling and branching. Thanks Martin! Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls") Reported-by: Jakub Sitnicki <jakub@cloudflare.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/159312677907.18340.11064813152758406626.stgit@john-XPS-13-9370
2020-06-26 02:12:59 +03:00
sk_psock_skb_redirect(skb);
bpf: Refactor sockmap redirect code so its easy to reuse We will need this block of code called from tls context shortly lets refactor the redirect logic so its easy to use. This also cleans up the switch stmt so we have fewer fallthrough cases. No logic changes are intended. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:41 +03:00
break;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
case __SK_DROP:
default:
out_free:
kfree_skb(skb);
}
}
static void sk_psock_strp_read(struct strparser *strp, struct sk_buff *skb)
{
bpf, sockmap: RCU dereferenced psock may be used outside RCU block If an ingress verdict program specifies message sizes greater than skb->len and there is an ENOMEM error due to memory pressure we may call the rcv_msg handler outside the strp_data_ready() caller context. This is because on an ENOMEM error the strparser will retry from a workqueue. The caller currently protects the use of psock by calling the strp_data_ready() inside a rcu_read_lock/unlock block. But, in above workqueue error case the psock is accessed outside the read_lock/unlock block of the caller. So instead of using psock directly we must do a look up against the sk again to ensure the psock is available. There is an an ugly piece here where we must handle the case where we paused the strp and removed the psock. On psock removal we first pause the strparser and then remove the psock. If the strparser is paused while an skb is scheduled on the workqueue the skb will be dropped on the flow and kfree_skb() is called. If the workqueue manages to get called before we pause the strparser but runs the rcvmsg callback after the psock is removed we will hit the unlikely case where we run the sockmap rcvmsg handler but do not have a psock. For now we will follow strparser logic and drop the skb on the floor with skb_kfree(). This is ugly because the data is dropped. To date this has not caused problems in practice because either the application controlling the sockmap is coordinating with the datapath so that skbs are "flushed" before removal or we simply wait for the sock to be closed before removing it. This patch fixes the describe RCU bug and dropping the skb doesn't make things worse. Future patches will improve this by allowing the normal case where skbs are not merged to skip the strparser altogether. In practice many (most?) use cases have no need to merge skbs so its both a code complexity hit as seen above and a performance issue. For example, in the Cilium case we always set the strparser up to return sbks 1:1 without any merging and have avoided above issues. Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159312679888.18340.15248924071966273998.stgit@john-XPS-13-9370
2020-06-26 02:13:18 +03:00
struct sk_psock *psock;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
struct bpf_prog *prog;
int ret = __SK_DROP;
bpf, sockmap: RCU dereferenced psock may be used outside RCU block If an ingress verdict program specifies message sizes greater than skb->len and there is an ENOMEM error due to memory pressure we may call the rcv_msg handler outside the strp_data_ready() caller context. This is because on an ENOMEM error the strparser will retry from a workqueue. The caller currently protects the use of psock by calling the strp_data_ready() inside a rcu_read_lock/unlock block. But, in above workqueue error case the psock is accessed outside the read_lock/unlock block of the caller. So instead of using psock directly we must do a look up against the sk again to ensure the psock is available. There is an an ugly piece here where we must handle the case where we paused the strp and removed the psock. On psock removal we first pause the strparser and then remove the psock. If the strparser is paused while an skb is scheduled on the workqueue the skb will be dropped on the flow and kfree_skb() is called. If the workqueue manages to get called before we pause the strparser but runs the rcvmsg callback after the psock is removed we will hit the unlikely case where we run the sockmap rcvmsg handler but do not have a psock. For now we will follow strparser logic and drop the skb on the floor with skb_kfree(). This is ugly because the data is dropped. To date this has not caused problems in practice because either the application controlling the sockmap is coordinating with the datapath so that skbs are "flushed" before removal or we simply wait for the sock to be closed before removing it. This patch fixes the describe RCU bug and dropping the skb doesn't make things worse. Future patches will improve this by allowing the normal case where skbs are not merged to skip the strparser altogether. In practice many (most?) use cases have no need to merge skbs so its both a code complexity hit as seen above and a performance issue. For example, in the Cilium case we always set the strparser up to return sbks 1:1 without any merging and have avoided above issues. Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159312679888.18340.15248924071966273998.stgit@john-XPS-13-9370
2020-06-26 02:13:18 +03:00
struct sock *sk;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
rcu_read_lock();
bpf, sockmap: RCU dereferenced psock may be used outside RCU block If an ingress verdict program specifies message sizes greater than skb->len and there is an ENOMEM error due to memory pressure we may call the rcv_msg handler outside the strp_data_ready() caller context. This is because on an ENOMEM error the strparser will retry from a workqueue. The caller currently protects the use of psock by calling the strp_data_ready() inside a rcu_read_lock/unlock block. But, in above workqueue error case the psock is accessed outside the read_lock/unlock block of the caller. So instead of using psock directly we must do a look up against the sk again to ensure the psock is available. There is an an ugly piece here where we must handle the case where we paused the strp and removed the psock. On psock removal we first pause the strparser and then remove the psock. If the strparser is paused while an skb is scheduled on the workqueue the skb will be dropped on the flow and kfree_skb() is called. If the workqueue manages to get called before we pause the strparser but runs the rcvmsg callback after the psock is removed we will hit the unlikely case where we run the sockmap rcvmsg handler but do not have a psock. For now we will follow strparser logic and drop the skb on the floor with skb_kfree(). This is ugly because the data is dropped. To date this has not caused problems in practice because either the application controlling the sockmap is coordinating with the datapath so that skbs are "flushed" before removal or we simply wait for the sock to be closed before removing it. This patch fixes the describe RCU bug and dropping the skb doesn't make things worse. Future patches will improve this by allowing the normal case where skbs are not merged to skip the strparser altogether. In practice many (most?) use cases have no need to merge skbs so its both a code complexity hit as seen above and a performance issue. For example, in the Cilium case we always set the strparser up to return sbks 1:1 without any merging and have avoided above issues. Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159312679888.18340.15248924071966273998.stgit@john-XPS-13-9370
2020-06-26 02:13:18 +03:00
sk = strp->sk;
psock = sk_psock(sk);
if (unlikely(!psock)) {
kfree_skb(skb);
goto out;
}
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
skb_set_owner_r(skb, sk);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
prog = READ_ONCE(psock->progs.skb_verdict);
if (likely(prog)) {
tcp_skb_bpf_redirect_clear(skb);
ret = sk_psock_bpf_run(psock, prog, skb);
ret = sk_psock_map_verd(ret, tcp_skb_bpf_redirect_fetch(skb));
}
sk_psock_verdict_apply(psock, skb, ret);
bpf, sockmap: RCU dereferenced psock may be used outside RCU block If an ingress verdict program specifies message sizes greater than skb->len and there is an ENOMEM error due to memory pressure we may call the rcv_msg handler outside the strp_data_ready() caller context. This is because on an ENOMEM error the strparser will retry from a workqueue. The caller currently protects the use of psock by calling the strp_data_ready() inside a rcu_read_lock/unlock block. But, in above workqueue error case the psock is accessed outside the read_lock/unlock block of the caller. So instead of using psock directly we must do a look up against the sk again to ensure the psock is available. There is an an ugly piece here where we must handle the case where we paused the strp and removed the psock. On psock removal we first pause the strparser and then remove the psock. If the strparser is paused while an skb is scheduled on the workqueue the skb will be dropped on the flow and kfree_skb() is called. If the workqueue manages to get called before we pause the strparser but runs the rcvmsg callback after the psock is removed we will hit the unlikely case where we run the sockmap rcvmsg handler but do not have a psock. For now we will follow strparser logic and drop the skb on the floor with skb_kfree(). This is ugly because the data is dropped. To date this has not caused problems in practice because either the application controlling the sockmap is coordinating with the datapath so that skbs are "flushed" before removal or we simply wait for the sock to be closed before removing it. This patch fixes the describe RCU bug and dropping the skb doesn't make things worse. Future patches will improve this by allowing the normal case where skbs are not merged to skip the strparser altogether. In practice many (most?) use cases have no need to merge skbs so its both a code complexity hit as seen above and a performance issue. For example, in the Cilium case we always set the strparser up to return sbks 1:1 without any merging and have avoided above issues. Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159312679888.18340.15248924071966273998.stgit@john-XPS-13-9370
2020-06-26 02:13:18 +03:00
out:
bpf, sockmap: RCU splat with redirect and strparser error or TLS There are two paths to generate the below RCU splat the first and most obvious is the result of the BPF verdict program issuing a redirect on a TLS socket (This is the splat shown below). Unlike the non-TLS case the caller of the *strp_read() hooks does not wrap the call in a rcu_read_lock/unlock. Then if the BPF program issues a redirect action we hit the RCU splat. However, in the non-TLS socket case the splat appears to be relatively rare, because the skmsg caller into the strp_data_ready() is wrapped in a rcu_read_lock/unlock. Shown here, static void sk_psock_strp_data_ready(struct sock *sk) { struct sk_psock *psock; rcu_read_lock(); psock = sk_psock(sk); if (likely(psock)) { if (tls_sw_has_ctx_rx(sk)) { psock->parser.saved_data_ready(sk); } else { write_lock_bh(&sk->sk_callback_lock); strp_data_ready(&psock->parser.strp); write_unlock_bh(&sk->sk_callback_lock); } } rcu_read_unlock(); } If the above was the only way to run the verdict program we would be safe. But, there is a case where the strparser may throw an ENOMEM error while parsing the skb. This is a result of a failed skb_clone, or alloc_skb_for_msg while building a new merged skb when the msg length needed spans multiple skbs. This will in turn put the skb on the strp_wrk workqueue in the strparser code. The skb will later be dequeued and verdict programs run, but now from a different context without the rcu_read_lock()/unlock() critical section in sk_psock_strp_data_ready() shown above. In practice I have not seen this yet, because as far as I know most users of the verdict programs are also only working on single skbs. In this case no merge happens which could trigger the above ENOMEM errors. In addition the system would need to be under memory pressure. For example, we can't hit the above case in selftests because we missed having tests to merge skbs. (Added in later patch) To fix the below splat extend the rcu_read_lock/unnlock block to include the call to sk_psock_tls_verdict_apply(). This will fix both TLS redirect case and non-TLS redirect+error case. Also remove psock from the sk_psock_tls_verdict_apply() function signature its not used there. [ 1095.937597] WARNING: suspicious RCU usage [ 1095.940964] 5.7.0-rc7-02911-g463bac5f1ca79 #1 Tainted: G W [ 1095.944363] ----------------------------- [ 1095.947384] include/linux/skmsg.h:284 suspicious rcu_dereference_check() usage! [ 1095.950866] [ 1095.950866] other info that might help us debug this: [ 1095.950866] [ 1095.957146] [ 1095.957146] rcu_scheduler_active = 2, debug_locks = 1 [ 1095.961482] 1 lock held by test_sockmap/15970: [ 1095.964501] #0: ffff9ea6b25de660 (sk_lock-AF_INET){+.+.}-{0:0}, at: tls_sw_recvmsg+0x13a/0x840 [tls] [ 1095.968568] [ 1095.968568] stack backtrace: [ 1095.975001] CPU: 1 PID: 15970 Comm: test_sockmap Tainted: G W 5.7.0-rc7-02911-g463bac5f1ca79 #1 [ 1095.977883] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 1095.980519] Call Trace: [ 1095.982191] dump_stack+0x8f/0xd0 [ 1095.984040] sk_psock_skb_redirect+0xa6/0xf0 [ 1095.986073] sk_psock_tls_strp_read+0x1d8/0x250 [ 1095.988095] tls_sw_recvmsg+0x714/0x840 [tls] v2: Improve commit message to identify non-TLS redirect plus error case condition as well as more common TLS case. In the process I decided doing the rcu_read_unlock followed by the lock/unlock inside branches was unnecessarily complex. We can just extend the current rcu block and get the same effeective without the shuffling and branching. Thanks Martin! Fixes: e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls") Reported-by: Jakub Sitnicki <jakub@cloudflare.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/159312677907.18340.11064813152758406626.stgit@john-XPS-13-9370
2020-06-26 02:12:59 +03:00
rcu_read_unlock();
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
}
static int sk_psock_strp_read_done(struct strparser *strp, int err)
{
return err;
}
static int sk_psock_strp_parse(struct strparser *strp, struct sk_buff *skb)
{
struct sk_psock *psock = sk_psock_from_strp(strp);
struct bpf_prog *prog;
int ret = skb->len;
rcu_read_lock();
prog = READ_ONCE(psock->progs.skb_parser);
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
if (likely(prog)) {
skb->sk = psock->sk;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
ret = sk_psock_bpf_run(psock, prog, skb);
bpf, sockmap: Add memory accounting so skbs on ingress lists are visible Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-09 21:37:55 +03:00
skb->sk = NULL;
}
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
rcu_read_unlock();
return ret;
}
/* Called with socket lock held. */
bpf: sk_msg, fix socket data_ready events When a skb verdict program is in-use and either another BPF program redirects to that socket or the new SK_PASS support is used the data_ready callback does not wake up application. Instead because the stream parser/verdict is using the sk data_ready callback we wake up the stream parser/verdict block. Fix this by adding a helper to check if the stream parser block is enabled on the sk and if so call the saved pointer which is the upper layers wake up function. This fixes application stalls observed when an application is waiting for data in a blocking read(). Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 22:35:33 +03:00
static void sk_psock_strp_data_ready(struct sock *sk)
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
{
struct sk_psock *psock;
rcu_read_lock();
psock = sk_psock(sk);
if (likely(psock)) {
bpf: Fix running sk_skb program types with ktls KTLS uses a stream parser to collect TLS messages and send them to the upper layer tls receive handler. This ensures the tls receiver has a full TLS header to parse when it is run. However, when a socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS is enabled we end up with two stream parsers running on the same socket. The result is both try to run on the same socket. First the KTLS stream parser runs and calls read_sock() which will tcp_read_sock which in turn calls tcp_rcv_skb(). This dequeues the skb from the sk_receive_queue. When this is done KTLS code then data_ready() callback which because we stacked KTLS on top of the bpf stream verdict program has been replaced with sk_psock_start_strp(). This will in turn kick the stream parser again and eventually do the same thing KTLS did above calling into tcp_rcv_skb() and dequeuing a skb from the sk_receive_queue. At this point the data stream is broke. Part of the stream was handled by the KTLS side some other bytes may have been handled by the BPF side. Generally this results in either missing data or more likely a "Bad Message" complaint from the kTLS receive handler as the BPF program steals some bytes meant to be in a TLS header and/or the TLS header length is no longer correct. We've already broke the idealized model where we can stack ULPs in any order with generic callbacks on the TX side to handle this. So in this patch we do the same thing but for RX side. We add a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict program is running and add a tls_sw_has_ctx_rx() helper so BPF side can learn there is a TLS ULP on the socket. Then on BPF side we omit calling our stream parser to avoid breaking the data stream for the KTLS receiver. Then on the KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS receiver is done with the packet but before it posts the msg to userspace. This gives us symmetry between the TX and RX halfs and IMO makes it usable again. On the TX side we process packets in this order BPF -> TLS -> TCP and on the receive side in the reverse order TCP -> TLS -> BPF. Discovered while testing OpenSSL 3.0 Alpha2.0 release. Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-05-30 02:06:59 +03:00
if (tls_sw_has_ctx_rx(sk)) {
psock->parser.saved_data_ready(sk);
} else {
write_lock_bh(&sk->sk_callback_lock);
strp_data_ready(&psock->parser.strp);
write_unlock_bh(&sk->sk_callback_lock);
}
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
}
rcu_read_unlock();
}
bpf, sockmap: Allow skipping sk_skb parser program Currently, we often run with a nop parser namely one that just does this, 'return skb->len'. This happens when either our verdict program can handle streaming data or it is only looking at socket data such as IP addresses and other metadata associated with the flow. The second case is common for a L3/L4 proxy for instance. So lets allow loading programs without the parser then we can skip the stream parser logic and avoid having to add a BPF program that is effectively a nop. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160239297866.8495.13345662302749219672.stgit@john-Precision-5820-Tower
2020-10-11 08:09:38 +03:00
static int sk_psock_verdict_recv(read_descriptor_t *desc, struct sk_buff *skb,
unsigned int offset, size_t orig_len)
{
struct sock *sk = (struct sock *)desc->arg.data;
struct sk_psock *psock;
struct bpf_prog *prog;
int ret = __SK_DROP;
int len = skb->len;
/* clone here so sk_eat_skb() in tcp_read_sock does not drop our data */
skb = skb_clone(skb, GFP_ATOMIC);
if (!skb) {
desc->error = -ENOMEM;
return 0;
}
rcu_read_lock();
psock = sk_psock(sk);
if (unlikely(!psock)) {
len = 0;
kfree_skb(skb);
goto out;
}
skb_set_owner_r(skb, sk);
prog = READ_ONCE(psock->progs.skb_verdict);
if (likely(prog)) {
tcp_skb_bpf_redirect_clear(skb);
ret = sk_psock_bpf_run(psock, prog, skb);
ret = sk_psock_map_verd(ret, tcp_skb_bpf_redirect_fetch(skb));
}
sk_psock_verdict_apply(psock, skb, ret);
out:
rcu_read_unlock();
return len;
}
static void sk_psock_verdict_data_ready(struct sock *sk)
{
struct socket *sock = sk->sk_socket;
read_descriptor_t desc;
if (unlikely(!sock || !sock->ops || !sock->ops->read_sock))
return;
desc.arg.data = sk;
desc.error = 0;
desc.count = 1;
sock->ops->read_sock(sk, &desc, sk_psock_verdict_recv);
}
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
static void sk_psock_write_space(struct sock *sk)
{
struct sk_psock *psock;
bpf: skmsg, fix potential psock NULL pointer dereference Report from Dan Carpenter, net/core/skmsg.c:792 sk_psock_write_space() error: we previously assumed 'psock' could be null (see line 790) net/core/skmsg.c 789 psock = sk_psock(sk); 790 if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))) Check for NULL 791 schedule_work(&psock->work); 792 write_space = psock->saved_write_space; ^^^^^^^^^^^^^^^^^^^^^^^^ 793 rcu_read_unlock(); 794 write_space(sk); Ensure psock dereference on line 792 only occurs if psock is not null. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21 19:25:09 +03:00
void (*write_space)(struct sock *sk) = NULL;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
rcu_read_lock();
psock = sk_psock(sk);
bpf: skmsg, fix potential psock NULL pointer dereference Report from Dan Carpenter, net/core/skmsg.c:792 sk_psock_write_space() error: we previously assumed 'psock' could be null (see line 790) net/core/skmsg.c 789 psock = sk_psock(sk); 790 if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))) Check for NULL 791 schedule_work(&psock->work); 792 write_space = psock->saved_write_space; ^^^^^^^^^^^^^^^^^^^^^^^^ 793 rcu_read_unlock(); 794 write_space(sk); Ensure psock dereference on line 792 only occurs if psock is not null. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21 19:25:09 +03:00
if (likely(psock)) {
if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))
schedule_work(&psock->work);
write_space = psock->saved_write_space;
}
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
rcu_read_unlock();
bpf: skmsg, fix potential psock NULL pointer dereference Report from Dan Carpenter, net/core/skmsg.c:792 sk_psock_write_space() error: we previously assumed 'psock' could be null (see line 790) net/core/skmsg.c 789 psock = sk_psock(sk); 790 if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))) Check for NULL 791 schedule_work(&psock->work); 792 write_space = psock->saved_write_space; ^^^^^^^^^^^^^^^^^^^^^^^^ 793 rcu_read_unlock(); 794 write_space(sk); Ensure psock dereference on line 792 only occurs if psock is not null. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21 19:25:09 +03:00
if (write_space)
write_space(sk);
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
}
int sk_psock_init_strp(struct sock *sk, struct sk_psock *psock)
{
static const struct strp_callbacks cb = {
.rcv_msg = sk_psock_strp_read,
.read_sock_done = sk_psock_strp_read_done,
.parse_msg = sk_psock_strp_parse,
};
psock->parser.enabled = false;
return strp_init(&psock->parser.strp, sk, &cb);
}
bpf, sockmap: Allow skipping sk_skb parser program Currently, we often run with a nop parser namely one that just does this, 'return skb->len'. This happens when either our verdict program can handle streaming data or it is only looking at socket data such as IP addresses and other metadata associated with the flow. The second case is common for a L3/L4 proxy for instance. So lets allow loading programs without the parser then we can skip the stream parser logic and avoid having to add a BPF program that is effectively a nop. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160239297866.8495.13345662302749219672.stgit@john-Precision-5820-Tower
2020-10-11 08:09:38 +03:00
void sk_psock_start_verdict(struct sock *sk, struct sk_psock *psock)
{
struct sk_psock_parser *parser = &psock->parser;
if (parser->enabled)
return;
parser->saved_data_ready = sk->sk_data_ready;
sk->sk_data_ready = sk_psock_verdict_data_ready;
sk->sk_write_space = sk_psock_write_space;
parser->enabled = true;
}
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
void sk_psock_start_strp(struct sock *sk, struct sk_psock *psock)
{
struct sk_psock_parser *parser = &psock->parser;
if (parser->enabled)
return;
parser->saved_data_ready = sk->sk_data_ready;
bpf: sk_msg, fix socket data_ready events When a skb verdict program is in-use and either another BPF program redirects to that socket or the new SK_PASS support is used the data_ready callback does not wake up application. Instead because the stream parser/verdict is using the sk data_ready callback we wake up the stream parser/verdict block. Fix this by adding a helper to check if the stream parser block is enabled on the sk and if so call the saved pointer which is the upper layers wake up function. This fixes application stalls observed when an application is waiting for data in a blocking read(). Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-20 22:35:33 +03:00
sk->sk_data_ready = sk_psock_strp_data_ready;
bpf, sockmap: convert to generic sk_msg interface Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-13 03:45:58 +03:00
sk->sk_write_space = sk_psock_write_space;
parser->enabled = true;
}
void sk_psock_stop_strp(struct sock *sk, struct sk_psock *psock)
{
struct sk_psock_parser *parser = &psock->parser;
if (!parser->enabled)
return;
sk->sk_data_ready = parser->saved_data_ready;
parser->saved_data_ready = NULL;
strp_stop(&parser->strp);
parser->enabled = false;
}
bpf, sockmap: Allow skipping sk_skb parser program Currently, we often run with a nop parser namely one that just does this, 'return skb->len'. This happens when either our verdict program can handle streaming data or it is only looking at socket data such as IP addresses and other metadata associated with the flow. The second case is common for a L3/L4 proxy for instance. So lets allow loading programs without the parser then we can skip the stream parser logic and avoid having to add a BPF program that is effectively a nop. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160239297866.8495.13345662302749219672.stgit@john-Precision-5820-Tower
2020-10-11 08:09:38 +03:00
void sk_psock_stop_verdict(struct sock *sk, struct sk_psock *psock)
{
struct sk_psock_parser *parser = &psock->parser;
if (!parser->enabled)
return;
sk->sk_data_ready = parser->saved_data_ready;
parser->saved_data_ready = NULL;
parser->enabled = false;
}