WSL2-Linux-Kernel/drivers/base/property.c

1486 строки
44 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* property.c - Unified device property interface.
*
* Copyright (C) 2014, Intel Corporation
* Authors: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Mika Westerberg <mika.westerberg@linux.intel.com>
*/
#include <linux/acpi.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_graph.h>
#include <linux/of_irq.h>
#include <linux/property.h>
#include <linux/etherdevice.h>
#include <linux/phy.h>
struct property_set {
device property: Track owner device of device property Deletion of subdevice will remove device properties associated to parent when they share the same firmware node after commit 478573c93abd (driver core: Don't leak secondary fwnode on device removal). This was observed with a driver adding subdevice that driver wasn't able to read device properties after rmmod/modprobe cycle. Consider the lifecycle of it: parent device registration ACPI_COMPANION_SET() device_add_properties() pset_copy_set() set_secondary_fwnode(dev, &p->fwnode) device_add() parent probe read device properties ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent)) device_add(subdevice) parent remove device_del(subdevice) device_remove_properties() set_secondary_fwnode(dev, NULL); pset_free() Parent device will have its primary firmware node pointing to an ACPI node and secondary firmware node point to device properties. ACPI_COMPANION_SET() call in parent probe will set the subdevice's firmware node to point to the same 'struct fwnode_handle' and the associated secondary firmware node, i.e. the device properties as the parent. When subdevice is deleted in parent remove that will remove those device properties and attempt to read device properties in next parent probe call will fail. Fix this by tracking the owner device of device properties and delete them only when owner device is being deleted. Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-09 16:28:37 +03:00
struct device *dev;
struct fwnode_handle fwnode;
const struct property_entry *properties;
};
static const struct fwnode_operations pset_fwnode_ops;
static inline bool is_pset_node(const struct fwnode_handle *fwnode)
{
return !IS_ERR_OR_NULL(fwnode) && fwnode->ops == &pset_fwnode_ops;
}
#define to_pset_node(__fwnode) \
({ \
typeof(__fwnode) __to_pset_node_fwnode = __fwnode; \
\
is_pset_node(__to_pset_node_fwnode) ? \
container_of(__to_pset_node_fwnode, \
struct property_set, fwnode) : \
NULL; \
})
static const struct property_entry *
pset_prop_get(const struct property_set *pset, const char *name)
{
const struct property_entry *prop;
if (!pset || !pset->properties)
return NULL;
for (prop = pset->properties; prop->name; prop++)
if (!strcmp(name, prop->name))
return prop;
return NULL;
}
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
static const void *property_get_pointer(const struct property_entry *prop)
{
switch (prop->type) {
case DEV_PROP_U8:
if (prop->is_array)
return prop->pointer.u8_data;
return &prop->value.u8_data;
case DEV_PROP_U16:
if (prop->is_array)
return prop->pointer.u16_data;
return &prop->value.u16_data;
case DEV_PROP_U32:
if (prop->is_array)
return prop->pointer.u32_data;
return &prop->value.u32_data;
case DEV_PROP_U64:
if (prop->is_array)
return prop->pointer.u64_data;
return &prop->value.u64_data;
case DEV_PROP_STRING:
if (prop->is_array)
return prop->pointer.str;
return &prop->value.str;
default:
return NULL;
}
}
static void property_set_pointer(struct property_entry *prop, const void *pointer)
{
switch (prop->type) {
case DEV_PROP_U8:
if (prop->is_array)
prop->pointer.u8_data = pointer;
else
prop->value.u8_data = *((u8 *)pointer);
break;
case DEV_PROP_U16:
if (prop->is_array)
prop->pointer.u16_data = pointer;
else
prop->value.u16_data = *((u16 *)pointer);
break;
case DEV_PROP_U32:
if (prop->is_array)
prop->pointer.u32_data = pointer;
else
prop->value.u32_data = *((u32 *)pointer);
break;
case DEV_PROP_U64:
if (prop->is_array)
prop->pointer.u64_data = pointer;
else
prop->value.u64_data = *((u64 *)pointer);
break;
case DEV_PROP_STRING:
if (prop->is_array)
prop->pointer.str = pointer;
else
prop->value.str = pointer;
break;
default:
break;
}
}
static const void *pset_prop_find(const struct property_set *pset,
const char *propname, size_t length)
{
const struct property_entry *prop;
const void *pointer;
prop = pset_prop_get(pset, propname);
if (!prop)
return ERR_PTR(-EINVAL);
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
pointer = property_get_pointer(prop);
if (!pointer)
return ERR_PTR(-ENODATA);
if (length > prop->length)
return ERR_PTR(-EOVERFLOW);
return pointer;
}
static int pset_prop_read_u8_array(const struct property_set *pset,
const char *propname,
u8 *values, size_t nval)
{
const void *pointer;
size_t length = nval * sizeof(*values);
pointer = pset_prop_find(pset, propname, length);
if (IS_ERR(pointer))
return PTR_ERR(pointer);
memcpy(values, pointer, length);
return 0;
}
static int pset_prop_read_u16_array(const struct property_set *pset,
const char *propname,
u16 *values, size_t nval)
{
const void *pointer;
size_t length = nval * sizeof(*values);
pointer = pset_prop_find(pset, propname, length);
if (IS_ERR(pointer))
return PTR_ERR(pointer);
memcpy(values, pointer, length);
return 0;
}
static int pset_prop_read_u32_array(const struct property_set *pset,
const char *propname,
u32 *values, size_t nval)
{
const void *pointer;
size_t length = nval * sizeof(*values);
pointer = pset_prop_find(pset, propname, length);
if (IS_ERR(pointer))
return PTR_ERR(pointer);
memcpy(values, pointer, length);
return 0;
}
static int pset_prop_read_u64_array(const struct property_set *pset,
const char *propname,
u64 *values, size_t nval)
{
const void *pointer;
size_t length = nval * sizeof(*values);
pointer = pset_prop_find(pset, propname, length);
if (IS_ERR(pointer))
return PTR_ERR(pointer);
memcpy(values, pointer, length);
return 0;
}
static int pset_prop_count_elems_of_size(const struct property_set *pset,
const char *propname, size_t length)
{
const struct property_entry *prop;
prop = pset_prop_get(pset, propname);
if (!prop)
return -EINVAL;
return prop->length / length;
}
static int pset_prop_read_string_array(const struct property_set *pset,
const char *propname,
const char **strings, size_t nval)
{
const struct property_entry *prop;
const void *pointer;
size_t array_len, length;
/* Find out the array length. */
prop = pset_prop_get(pset, propname);
if (!prop)
return -EINVAL;
if (!prop->is_array)
/* The array length for a non-array string property is 1. */
array_len = 1;
else
/* Find the length of an array. */
array_len = pset_prop_count_elems_of_size(pset, propname,
sizeof(const char *));
/* Return how many there are if strings is NULL. */
if (!strings)
return array_len;
array_len = min(nval, array_len);
length = array_len * sizeof(*strings);
pointer = pset_prop_find(pset, propname, length);
if (IS_ERR(pointer))
return PTR_ERR(pointer);
memcpy(strings, pointer, length);
return array_len;
}
struct fwnode_handle *dev_fwnode(struct device *dev)
{
return IS_ENABLED(CONFIG_OF) && dev->of_node ?
&dev->of_node->fwnode : dev->fwnode;
}
EXPORT_SYMBOL_GPL(dev_fwnode);
static bool pset_fwnode_property_present(const struct fwnode_handle *fwnode,
const char *propname)
{
return !!pset_prop_get(to_pset_node(fwnode), propname);
}
static int pset_fwnode_read_int_array(const struct fwnode_handle *fwnode,
const char *propname,
unsigned int elem_size, void *val,
size_t nval)
{
const struct property_set *node = to_pset_node(fwnode);
if (!val)
return pset_prop_count_elems_of_size(node, propname, elem_size);
switch (elem_size) {
case sizeof(u8):
return pset_prop_read_u8_array(node, propname, val, nval);
case sizeof(u16):
return pset_prop_read_u16_array(node, propname, val, nval);
case sizeof(u32):
return pset_prop_read_u32_array(node, propname, val, nval);
case sizeof(u64):
return pset_prop_read_u64_array(node, propname, val, nval);
}
return -ENXIO;
}
static int
pset_fwnode_property_read_string_array(const struct fwnode_handle *fwnode,
const char *propname,
const char **val, size_t nval)
{
return pset_prop_read_string_array(to_pset_node(fwnode), propname,
val, nval);
}
static const struct fwnode_operations pset_fwnode_ops = {
.property_present = pset_fwnode_property_present,
.property_read_int_array = pset_fwnode_read_int_array,
.property_read_string_array = pset_fwnode_property_read_string_array,
};
/**
* device_property_present - check if a property of a device is present
* @dev: Device whose property is being checked
* @propname: Name of the property
*
* Check if property @propname is present in the device firmware description.
*/
bool device_property_present(struct device *dev, const char *propname)
{
return fwnode_property_present(dev_fwnode(dev), propname);
}
EXPORT_SYMBOL_GPL(device_property_present);
/**
* fwnode_property_present - check if a property of a firmware node is present
* @fwnode: Firmware node whose property to check
* @propname: Name of the property
*/
bool fwnode_property_present(const struct fwnode_handle *fwnode,
const char *propname)
{
bool ret;
ret = fwnode_call_bool_op(fwnode, property_present, propname);
if (ret == false && !IS_ERR_OR_NULL(fwnode) &&
!IS_ERR_OR_NULL(fwnode->secondary))
ret = fwnode_call_bool_op(fwnode->secondary, property_present,
propname);
return ret;
}
EXPORT_SYMBOL_GPL(fwnode_property_present);
/**
* device_property_read_u8_array - return a u8 array property of a device
* @dev: Device to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Function reads an array of u8 properties with @propname from the device
* firmware description and stores them to @val if found.
*
* Return: number of values if @val was %NULL,
* %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of numbers,
* %-EOVERFLOW if the size of the property is not as expected.
* %-ENXIO if no suitable firmware interface is present.
*/
int device_property_read_u8_array(struct device *dev, const char *propname,
u8 *val, size_t nval)
{
return fwnode_property_read_u8_array(dev_fwnode(dev), propname, val, nval);
}
EXPORT_SYMBOL_GPL(device_property_read_u8_array);
/**
* device_property_read_u16_array - return a u16 array property of a device
* @dev: Device to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Function reads an array of u16 properties with @propname from the device
* firmware description and stores them to @val if found.
*
* Return: number of values if @val was %NULL,
* %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of numbers,
* %-EOVERFLOW if the size of the property is not as expected.
* %-ENXIO if no suitable firmware interface is present.
*/
int device_property_read_u16_array(struct device *dev, const char *propname,
u16 *val, size_t nval)
{
return fwnode_property_read_u16_array(dev_fwnode(dev), propname, val, nval);
}
EXPORT_SYMBOL_GPL(device_property_read_u16_array);
/**
* device_property_read_u32_array - return a u32 array property of a device
* @dev: Device to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Function reads an array of u32 properties with @propname from the device
* firmware description and stores them to @val if found.
*
* Return: number of values if @val was %NULL,
* %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of numbers,
* %-EOVERFLOW if the size of the property is not as expected.
* %-ENXIO if no suitable firmware interface is present.
*/
int device_property_read_u32_array(struct device *dev, const char *propname,
u32 *val, size_t nval)
{
return fwnode_property_read_u32_array(dev_fwnode(dev), propname, val, nval);
}
EXPORT_SYMBOL_GPL(device_property_read_u32_array);
/**
* device_property_read_u64_array - return a u64 array property of a device
* @dev: Device to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Function reads an array of u64 properties with @propname from the device
* firmware description and stores them to @val if found.
*
* Return: number of values if @val was %NULL,
* %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of numbers,
* %-EOVERFLOW if the size of the property is not as expected.
* %-ENXIO if no suitable firmware interface is present.
*/
int device_property_read_u64_array(struct device *dev, const char *propname,
u64 *val, size_t nval)
{
return fwnode_property_read_u64_array(dev_fwnode(dev), propname, val, nval);
}
EXPORT_SYMBOL_GPL(device_property_read_u64_array);
/**
* device_property_read_string_array - return a string array property of device
* @dev: Device to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Function reads an array of string properties with @propname from the device
* firmware description and stores them to @val if found.
*
* Return: number of values read on success if @val is non-NULL,
* number of values available on success if @val is NULL,
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO or %-EILSEQ if the property is not an array of strings,
* %-EOVERFLOW if the size of the property is not as expected.
* %-ENXIO if no suitable firmware interface is present.
*/
int device_property_read_string_array(struct device *dev, const char *propname,
const char **val, size_t nval)
{
return fwnode_property_read_string_array(dev_fwnode(dev), propname, val, nval);
}
EXPORT_SYMBOL_GPL(device_property_read_string_array);
/**
* device_property_read_string - return a string property of a device
* @dev: Device to get the property of
* @propname: Name of the property
* @val: The value is stored here
*
* Function reads property @propname from the device firmware description and
* stores the value into @val if found. The value is checked to be a string.
*
* Return: %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO or %-EILSEQ if the property type is not a string.
* %-ENXIO if no suitable firmware interface is present.
*/
int device_property_read_string(struct device *dev, const char *propname,
const char **val)
{
return fwnode_property_read_string(dev_fwnode(dev), propname, val);
}
EXPORT_SYMBOL_GPL(device_property_read_string);
/**
* device_property_match_string - find a string in an array and return index
* @dev: Device to get the property of
* @propname: Name of the property holding the array
* @string: String to look for
*
* Find a given string in a string array and if it is found return the
* index back.
*
* Return: %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of strings,
* %-ENXIO if no suitable firmware interface is present.
*/
int device_property_match_string(struct device *dev, const char *propname,
const char *string)
{
return fwnode_property_match_string(dev_fwnode(dev), propname, string);
}
EXPORT_SYMBOL_GPL(device_property_match_string);
static int fwnode_property_read_int_array(const struct fwnode_handle *fwnode,
const char *propname,
unsigned int elem_size, void *val,
size_t nval)
{
int ret;
ret = fwnode_call_int_op(fwnode, property_read_int_array, propname,
elem_size, val, nval);
if (ret == -EINVAL && !IS_ERR_OR_NULL(fwnode) &&
!IS_ERR_OR_NULL(fwnode->secondary))
ret = fwnode_call_int_op(
fwnode->secondary, property_read_int_array, propname,
elem_size, val, nval);
return ret;
}
/**
* fwnode_property_read_u8_array - return a u8 array property of firmware node
* @fwnode: Firmware node to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Read an array of u8 properties with @propname from @fwnode and stores them to
* @val if found.
*
* Return: number of values if @val was %NULL,
* %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of numbers,
* %-EOVERFLOW if the size of the property is not as expected,
* %-ENXIO if no suitable firmware interface is present.
*/
int fwnode_property_read_u8_array(const struct fwnode_handle *fwnode,
const char *propname, u8 *val, size_t nval)
{
return fwnode_property_read_int_array(fwnode, propname, sizeof(u8),
val, nval);
}
EXPORT_SYMBOL_GPL(fwnode_property_read_u8_array);
/**
* fwnode_property_read_u16_array - return a u16 array property of firmware node
* @fwnode: Firmware node to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Read an array of u16 properties with @propname from @fwnode and store them to
* @val if found.
*
* Return: number of values if @val was %NULL,
* %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of numbers,
* %-EOVERFLOW if the size of the property is not as expected,
* %-ENXIO if no suitable firmware interface is present.
*/
int fwnode_property_read_u16_array(const struct fwnode_handle *fwnode,
const char *propname, u16 *val, size_t nval)
{
return fwnode_property_read_int_array(fwnode, propname, sizeof(u16),
val, nval);
}
EXPORT_SYMBOL_GPL(fwnode_property_read_u16_array);
/**
* fwnode_property_read_u32_array - return a u32 array property of firmware node
* @fwnode: Firmware node to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Read an array of u32 properties with @propname from @fwnode store them to
* @val if found.
*
* Return: number of values if @val was %NULL,
* %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of numbers,
* %-EOVERFLOW if the size of the property is not as expected,
* %-ENXIO if no suitable firmware interface is present.
*/
int fwnode_property_read_u32_array(const struct fwnode_handle *fwnode,
const char *propname, u32 *val, size_t nval)
{
return fwnode_property_read_int_array(fwnode, propname, sizeof(u32),
val, nval);
}
EXPORT_SYMBOL_GPL(fwnode_property_read_u32_array);
/**
* fwnode_property_read_u64_array - return a u64 array property firmware node
* @fwnode: Firmware node to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Read an array of u64 properties with @propname from @fwnode and store them to
* @val if found.
*
* Return: number of values if @val was %NULL,
* %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of numbers,
* %-EOVERFLOW if the size of the property is not as expected,
* %-ENXIO if no suitable firmware interface is present.
*/
int fwnode_property_read_u64_array(const struct fwnode_handle *fwnode,
const char *propname, u64 *val, size_t nval)
{
return fwnode_property_read_int_array(fwnode, propname, sizeof(u64),
val, nval);
}
EXPORT_SYMBOL_GPL(fwnode_property_read_u64_array);
/**
* fwnode_property_read_string_array - return string array property of a node
* @fwnode: Firmware node to get the property of
* @propname: Name of the property
* @val: The values are stored here or %NULL to return the number of values
* @nval: Size of the @val array
*
* Read an string list property @propname from the given firmware node and store
* them to @val if found.
*
* Return: number of values read on success if @val is non-NULL,
* number of values available on success if @val is NULL,
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO or %-EILSEQ if the property is not an array of strings,
* %-EOVERFLOW if the size of the property is not as expected,
* %-ENXIO if no suitable firmware interface is present.
*/
int fwnode_property_read_string_array(const struct fwnode_handle *fwnode,
const char *propname, const char **val,
size_t nval)
{
int ret;
ret = fwnode_call_int_op(fwnode, property_read_string_array, propname,
val, nval);
if (ret == -EINVAL && !IS_ERR_OR_NULL(fwnode) &&
!IS_ERR_OR_NULL(fwnode->secondary))
ret = fwnode_call_int_op(fwnode->secondary,
property_read_string_array, propname,
val, nval);
return ret;
}
EXPORT_SYMBOL_GPL(fwnode_property_read_string_array);
/**
* fwnode_property_read_string - return a string property of a firmware node
* @fwnode: Firmware node to get the property of
* @propname: Name of the property
* @val: The value is stored here
*
* Read property @propname from the given firmware node and store the value into
* @val if found. The value is checked to be a string.
*
* Return: %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO or %-EILSEQ if the property is not a string,
* %-ENXIO if no suitable firmware interface is present.
*/
int fwnode_property_read_string(const struct fwnode_handle *fwnode,
const char *propname, const char **val)
{
int ret = fwnode_property_read_string_array(fwnode, propname, val, 1);
return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL_GPL(fwnode_property_read_string);
/**
* fwnode_property_match_string - find a string in an array and return index
* @fwnode: Firmware node to get the property of
* @propname: Name of the property holding the array
* @string: String to look for
*
* Find a given string in a string array and if it is found return the
* index back.
*
* Return: %0 if the property was found (success),
* %-EINVAL if given arguments are not valid,
* %-ENODATA if the property does not have a value,
* %-EPROTO if the property is not an array of strings,
* %-ENXIO if no suitable firmware interface is present.
*/
int fwnode_property_match_string(const struct fwnode_handle *fwnode,
const char *propname, const char *string)
{
const char **values;
int nval, ret;
nval = fwnode_property_read_string_array(fwnode, propname, NULL, 0);
if (nval < 0)
return nval;
if (nval == 0)
return -ENODATA;
values = kcalloc(nval, sizeof(*values), GFP_KERNEL);
if (!values)
return -ENOMEM;
ret = fwnode_property_read_string_array(fwnode, propname, values, nval);
if (ret < 0)
goto out;
ret = match_string(values, nval, string);
if (ret < 0)
ret = -ENODATA;
out:
kfree(values);
return ret;
}
EXPORT_SYMBOL_GPL(fwnode_property_match_string);
/**
* fwnode_property_get_reference_args() - Find a reference with arguments
* @fwnode: Firmware node where to look for the reference
* @prop: The name of the property
* @nargs_prop: The name of the property telling the number of
* arguments in the referred node. NULL if @nargs is known,
* otherwise @nargs is ignored. Only relevant on OF.
* @nargs: Number of arguments. Ignored if @nargs_prop is non-NULL.
* @index: Index of the reference, from zero onwards.
* @args: Result structure with reference and integer arguments.
*
* Obtain a reference based on a named property in an fwnode, with
* integer arguments.
*
* Caller is responsible to call fwnode_handle_put() on the returned
* args->fwnode pointer.
*
* Returns: %0 on success
* %-ENOENT when the index is out of bounds, the index has an empty
* reference or the property was not found
* %-EINVAL on parse error
*/
int fwnode_property_get_reference_args(const struct fwnode_handle *fwnode,
const char *prop, const char *nargs_prop,
unsigned int nargs, unsigned int index,
struct fwnode_reference_args *args)
{
return fwnode_call_int_op(fwnode, get_reference_args, prop, nargs_prop,
nargs, index, args);
}
EXPORT_SYMBOL_GPL(fwnode_property_get_reference_args);
static void property_entry_free_data(const struct property_entry *p)
{
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
const void *pointer = property_get_pointer(p);
size_t i, nval;
if (p->is_array) {
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
if (p->type == DEV_PROP_STRING && p->pointer.str) {
nval = p->length / sizeof(const char *);
for (i = 0; i < nval; i++)
kfree(p->pointer.str[i]);
}
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
kfree(pointer);
} else if (p->type == DEV_PROP_STRING) {
kfree(p->value.str);
}
kfree(p->name);
}
static int property_copy_string_array(struct property_entry *dst,
const struct property_entry *src)
{
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
const char **d;
size_t nval = src->length / sizeof(*d);
int i;
d = kcalloc(nval, sizeof(*d), GFP_KERNEL);
if (!d)
return -ENOMEM;
for (i = 0; i < nval; i++) {
d[i] = kstrdup(src->pointer.str[i], GFP_KERNEL);
if (!d[i] && src->pointer.str[i]) {
while (--i >= 0)
kfree(d[i]);
kfree(d);
return -ENOMEM;
}
}
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
dst->pointer.str = d;
return 0;
}
static int property_entry_copy_data(struct property_entry *dst,
const struct property_entry *src)
{
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
const void *pointer = property_get_pointer(src);
const void *new;
int error;
if (src->is_array) {
if (!src->length)
return -ENODATA;
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
if (src->type == DEV_PROP_STRING) {
error = property_copy_string_array(dst, src);
if (error)
return error;
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
new = dst->pointer.str;
} else {
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
new = kmemdup(pointer, src->length, GFP_KERNEL);
if (!new)
return -ENOMEM;
}
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
} else if (src->type == DEV_PROP_STRING) {
new = kstrdup(src->value.str, GFP_KERNEL);
if (!new && src->value.str)
return -ENOMEM;
} else {
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
new = pointer;
}
dst->length = src->length;
dst->is_array = src->is_array;
device property: Get rid of union aliasing Commit 318a19718261 (device property: refactor built-in properties support) went way too far and brought a union aliasing. Partially revert it here to get rid of union aliasing. Note, all Apple properties are considered as u8 arrays. To get a value of any of them the caller must use device_property_read_u8_array(). What's union aliasing? ~~~~~~~~~~~~~~~~~~~~~~ The C99 standard in section 6.2.5 paragraph 20 defines union type as "an overlapping nonempty set of member objects". It also states in section 6.7.2.1 paragraph 14 that "the value of at most one of the members can be stored in a union object at any time'. Union aliasing is a type punning mechanism using union members to store as one type and read back as another. Why it's not good? ~~~~~~~~~~~~~~~~~~ Section 6.2.6.1 paragraph 6 says that a union object may not be a trap representation, although its member objects may be. Meanwhile annex J.1 says that "the value of a union member other than the last one stored into" is unspecified [removed in C11]. In TC3, a footnote is added which specifies that accessing a member of a union other than the last one stored causes "the object representation" to be re-interpreted in the new type and specifically refers to this as "type punning". This conflicts to some degree with Annex J.1. While it's working in Linux with GCC, the use of union members to do type punning is not clear area in the C standard and might lead to unspecified behaviour. More information is available in this [1] blog post. [1]: https://davmac.wordpress.com/2010/02/26/c99-revisited/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-15 20:32:02 +03:00
dst->type = src->type;
property_set_pointer(dst, new);
dst->name = kstrdup(src->name, GFP_KERNEL);
if (!dst->name)
goto out_free_data;
return 0;
out_free_data:
property_entry_free_data(dst);
return -ENOMEM;
}
/**
* property_entries_dup - duplicate array of properties
* @properties: array of properties to copy
*
* This function creates a deep copy of the given NULL-terminated array
* of property entries.
*/
struct property_entry *
property_entries_dup(const struct property_entry *properties)
{
struct property_entry *p;
int i, n = 0;
while (properties[n].name)
n++;
p = kcalloc(n + 1, sizeof(*p), GFP_KERNEL);
if (!p)
return ERR_PTR(-ENOMEM);
for (i = 0; i < n; i++) {
int ret = property_entry_copy_data(&p[i], &properties[i]);
if (ret) {
while (--i >= 0)
property_entry_free_data(&p[i]);
kfree(p);
return ERR_PTR(ret);
}
}
return p;
}
EXPORT_SYMBOL_GPL(property_entries_dup);
/**
* property_entries_free - free previously allocated array of properties
* @properties: array of properties to destroy
*
* This function frees given NULL-terminated array of property entries,
* along with their data.
*/
void property_entries_free(const struct property_entry *properties)
{
const struct property_entry *p;
for (p = properties; p->name; p++)
property_entry_free_data(p);
kfree(properties);
}
EXPORT_SYMBOL_GPL(property_entries_free);
/**
* pset_free_set - releases memory allocated for copied property set
* @pset: Property set to release
*
* Function takes previously copied property set and releases all the
* memory allocated to it.
*/
static void pset_free_set(struct property_set *pset)
{
if (!pset)
return;
property_entries_free(pset->properties);
kfree(pset);
}
/**
* pset_copy_set - copies property set
* @pset: Property set to copy
*
* This function takes a deep copy of the given property set and returns
* pointer to the copy. Call device_free_property_set() to free resources
* allocated in this function.
*
* Return: Pointer to the new property set or error pointer.
*/
static struct property_set *pset_copy_set(const struct property_set *pset)
{
struct property_entry *properties;
struct property_set *p;
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p)
return ERR_PTR(-ENOMEM);
properties = property_entries_dup(pset->properties);
if (IS_ERR(properties)) {
kfree(p);
return ERR_CAST(properties);
}
p->properties = properties;
return p;
}
/**
* device_remove_properties - Remove properties from a device object.
* @dev: Device whose properties to remove.
*
* The function removes properties previously associated to the device
* secondary firmware node with device_add_properties(). Memory allocated
* to the properties will also be released.
*/
void device_remove_properties(struct device *dev)
{
struct fwnode_handle *fwnode;
device property: Track owner device of device property Deletion of subdevice will remove device properties associated to parent when they share the same firmware node after commit 478573c93abd (driver core: Don't leak secondary fwnode on device removal). This was observed with a driver adding subdevice that driver wasn't able to read device properties after rmmod/modprobe cycle. Consider the lifecycle of it: parent device registration ACPI_COMPANION_SET() device_add_properties() pset_copy_set() set_secondary_fwnode(dev, &p->fwnode) device_add() parent probe read device properties ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent)) device_add(subdevice) parent remove device_del(subdevice) device_remove_properties() set_secondary_fwnode(dev, NULL); pset_free() Parent device will have its primary firmware node pointing to an ACPI node and secondary firmware node point to device properties. ACPI_COMPANION_SET() call in parent probe will set the subdevice's firmware node to point to the same 'struct fwnode_handle' and the associated secondary firmware node, i.e. the device properties as the parent. When subdevice is deleted in parent remove that will remove those device properties and attempt to read device properties in next parent probe call will fail. Fix this by tracking the owner device of device properties and delete them only when owner device is being deleted. Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-09 16:28:37 +03:00
struct property_set *pset;
fwnode = dev_fwnode(dev);
if (!fwnode)
return;
/*
* Pick either primary or secondary node depending which one holds
* the pset. If there is no real firmware node (ACPI/DT) primary
* will hold the pset.
*/
device property: Track owner device of device property Deletion of subdevice will remove device properties associated to parent when they share the same firmware node after commit 478573c93abd (driver core: Don't leak secondary fwnode on device removal). This was observed with a driver adding subdevice that driver wasn't able to read device properties after rmmod/modprobe cycle. Consider the lifecycle of it: parent device registration ACPI_COMPANION_SET() device_add_properties() pset_copy_set() set_secondary_fwnode(dev, &p->fwnode) device_add() parent probe read device properties ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent)) device_add(subdevice) parent remove device_del(subdevice) device_remove_properties() set_secondary_fwnode(dev, NULL); pset_free() Parent device will have its primary firmware node pointing to an ACPI node and secondary firmware node point to device properties. ACPI_COMPANION_SET() call in parent probe will set the subdevice's firmware node to point to the same 'struct fwnode_handle' and the associated secondary firmware node, i.e. the device properties as the parent. When subdevice is deleted in parent remove that will remove those device properties and attempt to read device properties in next parent probe call will fail. Fix this by tracking the owner device of device properties and delete them only when owner device is being deleted. Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-09 16:28:37 +03:00
pset = to_pset_node(fwnode);
if (pset) {
set_primary_fwnode(dev, NULL);
} else {
device property: Track owner device of device property Deletion of subdevice will remove device properties associated to parent when they share the same firmware node after commit 478573c93abd (driver core: Don't leak secondary fwnode on device removal). This was observed with a driver adding subdevice that driver wasn't able to read device properties after rmmod/modprobe cycle. Consider the lifecycle of it: parent device registration ACPI_COMPANION_SET() device_add_properties() pset_copy_set() set_secondary_fwnode(dev, &p->fwnode) device_add() parent probe read device properties ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent)) device_add(subdevice) parent remove device_del(subdevice) device_remove_properties() set_secondary_fwnode(dev, NULL); pset_free() Parent device will have its primary firmware node pointing to an ACPI node and secondary firmware node point to device properties. ACPI_COMPANION_SET() call in parent probe will set the subdevice's firmware node to point to the same 'struct fwnode_handle' and the associated secondary firmware node, i.e. the device properties as the parent. When subdevice is deleted in parent remove that will remove those device properties and attempt to read device properties in next parent probe call will fail. Fix this by tracking the owner device of device properties and delete them only when owner device is being deleted. Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-09 16:28:37 +03:00
pset = to_pset_node(fwnode->secondary);
if (pset && dev == pset->dev)
set_secondary_fwnode(dev, NULL);
}
device property: Track owner device of device property Deletion of subdevice will remove device properties associated to parent when they share the same firmware node after commit 478573c93abd (driver core: Don't leak secondary fwnode on device removal). This was observed with a driver adding subdevice that driver wasn't able to read device properties after rmmod/modprobe cycle. Consider the lifecycle of it: parent device registration ACPI_COMPANION_SET() device_add_properties() pset_copy_set() set_secondary_fwnode(dev, &p->fwnode) device_add() parent probe read device properties ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent)) device_add(subdevice) parent remove device_del(subdevice) device_remove_properties() set_secondary_fwnode(dev, NULL); pset_free() Parent device will have its primary firmware node pointing to an ACPI node and secondary firmware node point to device properties. ACPI_COMPANION_SET() call in parent probe will set the subdevice's firmware node to point to the same 'struct fwnode_handle' and the associated secondary firmware node, i.e. the device properties as the parent. When subdevice is deleted in parent remove that will remove those device properties and attempt to read device properties in next parent probe call will fail. Fix this by tracking the owner device of device properties and delete them only when owner device is being deleted. Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-09 16:28:37 +03:00
if (pset && dev == pset->dev)
pset_free_set(pset);
}
EXPORT_SYMBOL_GPL(device_remove_properties);
/**
* device_add_properties - Add a collection of properties to a device object.
* @dev: Device to add properties to.
* @properties: Collection of properties to add.
*
* Associate a collection of device properties represented by @properties with
* @dev as its secondary firmware node. The function takes a copy of
* @properties.
*/
int device_add_properties(struct device *dev,
const struct property_entry *properties)
{
struct property_set *p, pset;
if (!properties)
return -EINVAL;
pset.properties = properties;
p = pset_copy_set(&pset);
if (IS_ERR(p))
return PTR_ERR(p);
p->fwnode.ops = &pset_fwnode_ops;
set_secondary_fwnode(dev, &p->fwnode);
device property: Track owner device of device property Deletion of subdevice will remove device properties associated to parent when they share the same firmware node after commit 478573c93abd (driver core: Don't leak secondary fwnode on device removal). This was observed with a driver adding subdevice that driver wasn't able to read device properties after rmmod/modprobe cycle. Consider the lifecycle of it: parent device registration ACPI_COMPANION_SET() device_add_properties() pset_copy_set() set_secondary_fwnode(dev, &p->fwnode) device_add() parent probe read device properties ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent)) device_add(subdevice) parent remove device_del(subdevice) device_remove_properties() set_secondary_fwnode(dev, NULL); pset_free() Parent device will have its primary firmware node pointing to an ACPI node and secondary firmware node point to device properties. ACPI_COMPANION_SET() call in parent probe will set the subdevice's firmware node to point to the same 'struct fwnode_handle' and the associated secondary firmware node, i.e. the device properties as the parent. When subdevice is deleted in parent remove that will remove those device properties and attempt to read device properties in next parent probe call will fail. Fix this by tracking the owner device of device properties and delete them only when owner device is being deleted. Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-09 16:28:37 +03:00
p->dev = dev;
return 0;
}
EXPORT_SYMBOL_GPL(device_add_properties);
/**
* fwnode_get_next_parent - Iterate to the node's parent
* @fwnode: Firmware whose parent is retrieved
*
* This is like fwnode_get_parent() except that it drops the refcount
* on the passed node, making it suitable for iterating through a
* node's parents.
*
* Returns a node pointer with refcount incremented, use
* fwnode_handle_node() on it when done.
*/
struct fwnode_handle *fwnode_get_next_parent(struct fwnode_handle *fwnode)
{
struct fwnode_handle *parent = fwnode_get_parent(fwnode);
fwnode_handle_put(fwnode);
return parent;
}
EXPORT_SYMBOL_GPL(fwnode_get_next_parent);
/**
* fwnode_get_parent - Return parent firwmare node
* @fwnode: Firmware whose parent is retrieved
*
* Return parent firmware node of the given node if possible or %NULL if no
* parent was available.
*/
struct fwnode_handle *fwnode_get_parent(const struct fwnode_handle *fwnode)
{
return fwnode_call_ptr_op(fwnode, get_parent);
}
EXPORT_SYMBOL_GPL(fwnode_get_parent);
/**
* fwnode_get_next_child_node - Return the next child node handle for a node
* @fwnode: Firmware node to find the next child node for.
* @child: Handle to one of the node's child nodes or a %NULL handle.
*/
struct fwnode_handle *
fwnode_get_next_child_node(const struct fwnode_handle *fwnode,
struct fwnode_handle *child)
{
return fwnode_call_ptr_op(fwnode, get_next_child_node, child);
}
EXPORT_SYMBOL_GPL(fwnode_get_next_child_node);
/**
* fwnode_get_next_available_child_node - Return the next
* available child node handle for a node
* @fwnode: Firmware node to find the next child node for.
* @child: Handle to one of the node's child nodes or a %NULL handle.
*/
struct fwnode_handle *
fwnode_get_next_available_child_node(const struct fwnode_handle *fwnode,
struct fwnode_handle *child)
{
struct fwnode_handle *next_child = child;
if (!fwnode)
return NULL;
do {
next_child = fwnode_get_next_child_node(fwnode, next_child);
if (!next_child || fwnode_device_is_available(next_child))
break;
} while (next_child);
return next_child;
}
EXPORT_SYMBOL_GPL(fwnode_get_next_available_child_node);
/**
* device_get_next_child_node - Return the next child node handle for a device
* @dev: Device to find the next child node for.
* @child: Handle to one of the device's child nodes or a null handle.
*/
struct fwnode_handle *device_get_next_child_node(struct device *dev,
struct fwnode_handle *child)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
struct fwnode_handle *fwnode = NULL;
if (dev->of_node)
fwnode = &dev->of_node->fwnode;
else if (adev)
fwnode = acpi_fwnode_handle(adev);
return fwnode_get_next_child_node(fwnode, child);
}
EXPORT_SYMBOL_GPL(device_get_next_child_node);
/**
* fwnode_get_named_child_node - Return first matching named child node handle
* @fwnode: Firmware node to find the named child node for.
* @childname: String to match child node name against.
*/
struct fwnode_handle *
fwnode_get_named_child_node(const struct fwnode_handle *fwnode,
const char *childname)
{
return fwnode_call_ptr_op(fwnode, get_named_child_node, childname);
}
EXPORT_SYMBOL_GPL(fwnode_get_named_child_node);
/**
* device_get_named_child_node - Return first matching named child node handle
* @dev: Device to find the named child node for.
* @childname: String to match child node name against.
*/
struct fwnode_handle *device_get_named_child_node(struct device *dev,
const char *childname)
{
return fwnode_get_named_child_node(dev_fwnode(dev), childname);
}
EXPORT_SYMBOL_GPL(device_get_named_child_node);
/**
* fwnode_handle_get - Obtain a reference to a device node
* @fwnode: Pointer to the device node to obtain the reference to.
*
* Returns the fwnode handle.
*/
struct fwnode_handle *fwnode_handle_get(struct fwnode_handle *fwnode)
{
if (!fwnode_has_op(fwnode, get))
return fwnode;
return fwnode_call_ptr_op(fwnode, get);
}
EXPORT_SYMBOL_GPL(fwnode_handle_get);
/**
* fwnode_handle_put - Drop reference to a device node
* @fwnode: Pointer to the device node to drop the reference to.
*
* This has to be used when terminating device_for_each_child_node() iteration
* with break or return to prevent stale device node references from being left
* behind.
*/
void fwnode_handle_put(struct fwnode_handle *fwnode)
{
fwnode_call_void_op(fwnode, put);
}
EXPORT_SYMBOL_GPL(fwnode_handle_put);
/**
* fwnode_device_is_available - check if a device is available for use
* @fwnode: Pointer to the fwnode of the device.
*/
bool fwnode_device_is_available(const struct fwnode_handle *fwnode)
{
return fwnode_call_bool_op(fwnode, device_is_available);
}
EXPORT_SYMBOL_GPL(fwnode_device_is_available);
/**
* device_get_child_node_count - return the number of child nodes for device
* @dev: Device to cound the child nodes for
*/
unsigned int device_get_child_node_count(struct device *dev)
{
struct fwnode_handle *child;
unsigned int count = 0;
device_for_each_child_node(dev, child)
count++;
return count;
}
EXPORT_SYMBOL_GPL(device_get_child_node_count);
bool device_dma_supported(struct device *dev)
{
/* For DT, this is always supported.
* For ACPI, this depends on CCA, which
* is determined by the acpi_dma_supported().
*/
if (IS_ENABLED(CONFIG_OF) && dev->of_node)
return true;
return acpi_dma_supported(ACPI_COMPANION(dev));
}
EXPORT_SYMBOL_GPL(device_dma_supported);
enum dev_dma_attr device_get_dma_attr(struct device *dev)
{
enum dev_dma_attr attr = DEV_DMA_NOT_SUPPORTED;
if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
if (of_dma_is_coherent(dev->of_node))
attr = DEV_DMA_COHERENT;
else
attr = DEV_DMA_NON_COHERENT;
} else
attr = acpi_get_dma_attr(ACPI_COMPANION(dev));
return attr;
}
EXPORT_SYMBOL_GPL(device_get_dma_attr);
/**
* fwnode_get_phy_mode - Get phy mode for given firmware node
* @fwnode: Pointer to the given node
*
* The function gets phy interface string from property 'phy-mode' or
* 'phy-connection-type', and return its index in phy_modes table, or errno in
* error case.
*/
int fwnode_get_phy_mode(struct fwnode_handle *fwnode)
{
const char *pm;
int err, i;
err = fwnode_property_read_string(fwnode, "phy-mode", &pm);
if (err < 0)
err = fwnode_property_read_string(fwnode,
"phy-connection-type", &pm);
if (err < 0)
return err;
for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++)
if (!strcasecmp(pm, phy_modes(i)))
return i;
return -ENODEV;
}
EXPORT_SYMBOL_GPL(fwnode_get_phy_mode);
/**
* device_get_phy_mode - Get phy mode for given device
* @dev: Pointer to the given device
*
* The function gets phy interface string from property 'phy-mode' or
* 'phy-connection-type', and return its index in phy_modes table, or errno in
* error case.
*/
int device_get_phy_mode(struct device *dev)
{
return fwnode_get_phy_mode(dev_fwnode(dev));
}
EXPORT_SYMBOL_GPL(device_get_phy_mode);
static void *fwnode_get_mac_addr(struct fwnode_handle *fwnode,
const char *name, char *addr,
int alen)
{
int ret = fwnode_property_read_u8_array(fwnode, name, addr, alen);
if (ret == 0 && alen == ETH_ALEN && is_valid_ether_addr(addr))
return addr;
return NULL;
}
/**
* fwnode_get_mac_address - Get the MAC from the firmware node
* @fwnode: Pointer to the firmware node
* @addr: Address of buffer to store the MAC in
* @alen: Length of the buffer pointed to by addr, should be ETH_ALEN
*
* Search the firmware node for the best MAC address to use. 'mac-address' is
* checked first, because that is supposed to contain to "most recent" MAC
* address. If that isn't set, then 'local-mac-address' is checked next,
* because that is the default address. If that isn't set, then the obsolete
* 'address' is checked, just in case we're using an old device tree.
*
* Note that the 'address' property is supposed to contain a virtual address of
* the register set, but some DTS files have redefined that property to be the
* MAC address.
*
* All-zero MAC addresses are rejected, because those could be properties that
* exist in the firmware tables, but were not updated by the firmware. For
* example, the DTS could define 'mac-address' and 'local-mac-address', with
* zero MAC addresses. Some older U-Boots only initialized 'local-mac-address'.
* In this case, the real MAC is in 'local-mac-address', and 'mac-address'
* exists but is all zeros.
*/
void *fwnode_get_mac_address(struct fwnode_handle *fwnode, char *addr, int alen)
{
char *res;
res = fwnode_get_mac_addr(fwnode, "mac-address", addr, alen);
if (res)
return res;
res = fwnode_get_mac_addr(fwnode, "local-mac-address", addr, alen);
if (res)
return res;
return fwnode_get_mac_addr(fwnode, "address", addr, alen);
}
EXPORT_SYMBOL(fwnode_get_mac_address);
/**
* device_get_mac_address - Get the MAC for a given device
* @dev: Pointer to the device
* @addr: Address of buffer to store the MAC in
* @alen: Length of the buffer pointed to by addr, should be ETH_ALEN
*/
void *device_get_mac_address(struct device *dev, char *addr, int alen)
{
return fwnode_get_mac_address(dev_fwnode(dev), addr, alen);
}
EXPORT_SYMBOL(device_get_mac_address);
/**
* fwnode_irq_get - Get IRQ directly from a fwnode
* @fwnode: Pointer to the firmware node
* @index: Zero-based index of the IRQ
*
* Returns Linux IRQ number on success. Other values are determined
* accordingly to acpi_/of_ irq_get() operation.
*/
int fwnode_irq_get(struct fwnode_handle *fwnode, unsigned int index)
{
struct device_node *of_node = to_of_node(fwnode);
struct resource res;
int ret;
if (IS_ENABLED(CONFIG_OF) && of_node)
return of_irq_get(of_node, index);
ret = acpi_irq_get(ACPI_HANDLE_FWNODE(fwnode), index, &res);
if (ret)
return ret;
return res.start;
}
EXPORT_SYMBOL(fwnode_irq_get);
/**
* device_graph_get_next_endpoint - Get next endpoint firmware node
* @fwnode: Pointer to the parent firmware node
* @prev: Previous endpoint node or %NULL to get the first
*
* Returns an endpoint firmware node pointer or %NULL if no more endpoints
* are available.
*/
struct fwnode_handle *
fwnode_graph_get_next_endpoint(const struct fwnode_handle *fwnode,
struct fwnode_handle *prev)
{
return fwnode_call_ptr_op(fwnode, graph_get_next_endpoint, prev);
}
EXPORT_SYMBOL_GPL(fwnode_graph_get_next_endpoint);
/**
* fwnode_graph_get_port_parent - Return the device fwnode of a port endpoint
* @endpoint: Endpoint firmware node of the port
*
* Return: the firmware node of the device the @endpoint belongs to.
*/
struct fwnode_handle *
fwnode_graph_get_port_parent(const struct fwnode_handle *endpoint)
{
struct fwnode_handle *port, *parent;
port = fwnode_get_parent(endpoint);
parent = fwnode_call_ptr_op(port, graph_get_port_parent);
fwnode_handle_put(port);
return parent;
}
EXPORT_SYMBOL_GPL(fwnode_graph_get_port_parent);
/**
* fwnode_graph_get_remote_port_parent - Return fwnode of a remote device
* @fwnode: Endpoint firmware node pointing to the remote endpoint
*
* Extracts firmware node of a remote device the @fwnode points to.
*/
struct fwnode_handle *
fwnode_graph_get_remote_port_parent(const struct fwnode_handle *fwnode)
{
struct fwnode_handle *endpoint, *parent;
endpoint = fwnode_graph_get_remote_endpoint(fwnode);
parent = fwnode_graph_get_port_parent(endpoint);
fwnode_handle_put(endpoint);
return parent;
}
EXPORT_SYMBOL_GPL(fwnode_graph_get_remote_port_parent);
/**
* fwnode_graph_get_remote_port - Return fwnode of a remote port
* @fwnode: Endpoint firmware node pointing to the remote endpoint
*
* Extracts firmware node of a remote port the @fwnode points to.
*/
struct fwnode_handle *
fwnode_graph_get_remote_port(const struct fwnode_handle *fwnode)
{
return fwnode_get_next_parent(fwnode_graph_get_remote_endpoint(fwnode));
}
EXPORT_SYMBOL_GPL(fwnode_graph_get_remote_port);
/**
* fwnode_graph_get_remote_endpoint - Return fwnode of a remote endpoint
* @fwnode: Endpoint firmware node pointing to the remote endpoint
*
* Extracts firmware node of a remote endpoint the @fwnode points to.
*/
struct fwnode_handle *
fwnode_graph_get_remote_endpoint(const struct fwnode_handle *fwnode)
{
return fwnode_call_ptr_op(fwnode, graph_get_remote_endpoint);
}
EXPORT_SYMBOL_GPL(fwnode_graph_get_remote_endpoint);
/**
* fwnode_graph_get_remote_node - get remote parent node for given port/endpoint
* @fwnode: pointer to parent fwnode_handle containing graph port/endpoint
* @port_id: identifier of the parent port node
* @endpoint_id: identifier of the endpoint node
*
* Return: Remote fwnode handle associated with remote endpoint node linked
* to @node. Use fwnode_node_put() on it when done.
*/
struct fwnode_handle *
fwnode_graph_get_remote_node(const struct fwnode_handle *fwnode, u32 port_id,
u32 endpoint_id)
{
struct fwnode_handle *endpoint = NULL;
while ((endpoint = fwnode_graph_get_next_endpoint(fwnode, endpoint))) {
struct fwnode_endpoint fwnode_ep;
struct fwnode_handle *remote;
int ret;
ret = fwnode_graph_parse_endpoint(endpoint, &fwnode_ep);
if (ret < 0)
continue;
if (fwnode_ep.port != port_id || fwnode_ep.id != endpoint_id)
continue;
remote = fwnode_graph_get_remote_port_parent(endpoint);
if (!remote)
return NULL;
return fwnode_device_is_available(remote) ? remote : NULL;
}
return NULL;
}
EXPORT_SYMBOL_GPL(fwnode_graph_get_remote_node);
/**
* fwnode_graph_parse_endpoint - parse common endpoint node properties
* @fwnode: pointer to endpoint fwnode_handle
* @endpoint: pointer to the fwnode endpoint data structure
*
* Parse @fwnode representing a graph endpoint node and store the
* information in @endpoint. The caller must hold a reference to
* @fwnode.
*/
int fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode,
struct fwnode_endpoint *endpoint)
{
memset(endpoint, 0, sizeof(*endpoint));
return fwnode_call_int_op(fwnode, graph_parse_endpoint, endpoint);
}
EXPORT_SYMBOL(fwnode_graph_parse_endpoint);
const void *device_get_match_data(struct device *dev)
{
return fwnode_call_ptr_op(dev_fwnode(dev), device_get_match_data, dev);
}
EXPORT_SYMBOL_GPL(device_get_match_data);