WSL2-Linux-Kernel/fs/ubifs/recovery.c

1589 строки
43 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* This file is part of UBIFS.
*
* Copyright (C) 2006-2008 Nokia Corporation
*
* Authors: Adrian Hunter
* Artem Bityutskiy (Битюцкий Артём)
*/
/*
* This file implements functions needed to recover from unclean un-mounts.
* When UBIFS is mounted, it checks a flag on the master node to determine if
* an un-mount was completed successfully. If not, the process of mounting
UBIFS: fix GC LEB recovery UBIFS tries to alway have an LEB reserved for GC, and stores it in c->gc_lnum. Besides, there is GC head which points to the current GC head LEB. In case of an unclean power cut, what may happen is that the GC head was switched to the reserved GC LEB (c->gc_lnum), but a new reserved GC LEB was not created yet. So, after an unclean reboot we may have no reserved GC LEB, and we need to find a new LEB for this. To do this, we find a dirty LEB which can fit the current GC head, move the data, unmap this dirty LEB, and it becomes our reserved GC LEB. However, if we cannot find a dirty enough LEB, we return failure, which is wrong, because we still can have free LEBs to use for the reserved GC LEB. This patch fixes the issue. This patch also fixes few typos in comments, which were spotted by aspell. Note, this patch fixes a real issue [ 14.328117] UBIFS: recovery needed [ 53.941378] UBIFS error (pid 462): ubifs_rcvry_gc_commit: could not find a dirty LEB [ 89.606399] UBIFS: recovery completed [ 89.609329] UBIFS assert failed in mount_ubifs at 1358 (pid 462) [ 89.616165] [<c0026144>] (unwind_backtrace+0x0/0xe4) from [<c0125ce4>] (ubifs_fill_super+0x11d0/0x1c4c) [ 89.625930] [<c0125ce4>] (ubifs_fill_super+0x11d0/0x1c4c) from [<c0126910>] (ubifs_get_sb+0x1b0/0x354) [ 89.635696] [<c0126910>] (ubifs_get_sb+0x1b0/0x354) from [<c008a50c>] (vfs_kern_mount+0x50/0xe0) [ 89.644485] [<c008a50c>] (vfs_kern_mount+0x50/0xe0) from [<c008a5e0>] (do_kern_mount+0x34/0xdc) [ 89.653274] [<c008a5e0>] (do_kern_mount+0x34/0xdc) from [<c00a29d8>] (do_mount+0x148/0x7cc) [ 89.662063] [<c00a29d8>] (do_mount+0x148/0x7cc) from [<c00a30f4>] (sys_mount+0x98/0xc8) [ 89.670852] [<c00a30f4>] (sys_mount+0x98/0xc8) from [<c0021f40>] (ret_fast_syscall+0x0/0x28) which was reported here: http://article.gmane.org/gmane.linux.drivers.mtd/29923 by Alexander Pazdnikov <pazdnikov@list.ru> Reported-by: Alexander Pazdnikov <pazdnikov@list.ru> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: Adrian Hunter <adrian.hunter@nokia.com>
2010-05-23 16:20:21 +04:00
* incorporates additional checking and fixing of on-flash data structures.
* UBIFS always cleans away all remnants of an unclean un-mount, so that
* errors do not accumulate. However UBIFS defers recovery if it is mounted
* read-only, and the flash is not modified in that case.
*
* The general UBIFS approach to the recovery is that it recovers from
* corruptions which could be caused by power cuts, but it refuses to recover
* from corruption caused by other reasons. And UBIFS tries to distinguish
* between these 2 reasons of corruptions and silently recover in the former
* case and loudly complain in the latter case.
*
* UBIFS writes only to erased LEBs, so it writes only to the flash space
* containing only 0xFFs. UBIFS also always writes strictly from the beginning
* of the LEB to the end. And UBIFS assumes that the underlying flash media
* writes in @c->max_write_size bytes at a time.
*
* Hence, if UBIFS finds a corrupted node at offset X, it expects only the min.
* I/O unit corresponding to offset X to contain corrupted data, all the
* following min. I/O units have to contain empty space (all 0xFFs). If this is
* not true, the corruption cannot be the result of a power cut, and UBIFS
* refuses to mount.
*/
#include <linux/crc32.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include "ubifs.h"
/**
* is_empty - determine whether a buffer is empty (contains all 0xff).
* @buf: buffer to clean
* @len: length of buffer
*
* This function returns %1 if the buffer is empty (contains all 0xff) otherwise
* %0 is returned.
*/
static int is_empty(void *buf, int len)
{
uint8_t *p = buf;
int i;
for (i = 0; i < len; i++)
if (*p++ != 0xff)
return 0;
return 1;
}
/**
* first_non_ff - find offset of the first non-0xff byte.
* @buf: buffer to search in
* @len: length of buffer
*
* This function returns offset of the first non-0xff byte in @buf or %-1 if
* the buffer contains only 0xff bytes.
*/
static int first_non_ff(void *buf, int len)
{
uint8_t *p = buf;
int i;
for (i = 0; i < len; i++)
if (*p++ != 0xff)
return i;
return -1;
}
/**
* get_master_node - get the last valid master node allowing for corruption.
* @c: UBIFS file-system description object
* @lnum: LEB number
* @pbuf: buffer containing the LEB read, is returned here
* @mst: master node, if found, is returned here
* @cor: corruption, if found, is returned here
*
* This function allocates a buffer, reads the LEB into it, and finds and
* returns the last valid master node allowing for one area of corruption.
* The corrupt area, if there is one, must be consistent with the assumption
* that it is the result of an unclean unmount while the master node was being
* written. Under those circumstances, it is valid to use the previously written
* master node.
*
* This function returns %0 on success and a negative error code on failure.
*/
static int get_master_node(const struct ubifs_info *c, int lnum, void **pbuf,
struct ubifs_mst_node **mst, void **cor)
{
const int sz = c->mst_node_alsz;
int err, offs, len;
void *sbuf, *buf;
sbuf = vmalloc(c->leb_size);
if (!sbuf)
return -ENOMEM;
err = ubifs_leb_read(c, lnum, sbuf, 0, c->leb_size, 0);
if (err && err != -EBADMSG)
goto out_free;
/* Find the first position that is definitely not a node */
offs = 0;
buf = sbuf;
len = c->leb_size;
while (offs + UBIFS_MST_NODE_SZ <= c->leb_size) {
struct ubifs_ch *ch = buf;
if (le32_to_cpu(ch->magic) != UBIFS_NODE_MAGIC)
break;
offs += sz;
buf += sz;
len -= sz;
}
/* See if there was a valid master node before that */
if (offs) {
int ret;
offs -= sz;
buf -= sz;
len += sz;
ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1);
if (ret != SCANNED_A_NODE && offs) {
/* Could have been corruption so check one place back */
offs -= sz;
buf -= sz;
len += sz;
ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1);
if (ret != SCANNED_A_NODE)
/*
* We accept only one area of corruption because
* we are assuming that it was caused while
* trying to write a master node.
*/
goto out_err;
}
if (ret == SCANNED_A_NODE) {
struct ubifs_ch *ch = buf;
if (ch->node_type != UBIFS_MST_NODE)
goto out_err;
dbg_rcvry("found a master node at %d:%d", lnum, offs);
*mst = buf;
offs += sz;
buf += sz;
len -= sz;
}
}
/* Check for corruption */
if (offs < c->leb_size) {
if (!is_empty(buf, min_t(int, len, sz))) {
*cor = buf;
dbg_rcvry("found corruption at %d:%d", lnum, offs);
}
offs += sz;
buf += sz;
len -= sz;
}
/* Check remaining empty space */
if (offs < c->leb_size)
if (!is_empty(buf, len))
goto out_err;
*pbuf = sbuf;
return 0;
out_err:
err = -EINVAL;
out_free:
vfree(sbuf);
*mst = NULL;
*cor = NULL;
return err;
}
/**
* write_rcvrd_mst_node - write recovered master node.
* @c: UBIFS file-system description object
* @mst: master node
*
* This function returns %0 on success and a negative error code on failure.
*/
static int write_rcvrd_mst_node(struct ubifs_info *c,
struct ubifs_mst_node *mst)
{
int err = 0, lnum = UBIFS_MST_LNUM, sz = c->mst_node_alsz;
UBIFS: endian handling fixes and annotations Noticed by sparse: fs/ubifs/file.c:75:2: warning: restricted __le64 degrades to integer fs/ubifs/file.c:629:4: warning: restricted __le64 degrades to integer fs/ubifs/dir.c:431:3: warning: restricted __le64 degrades to integer This should be checked to ensure the ubifs_assert is working as intended, I've done the suggested annotation in this patch. fs/ubifs/sb.c:298:6: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:298:6: expected int [signed] [assigned] tmp fs/ubifs/sb.c:298:6: got restricted __le64 [usertype] <noident> fs/ubifs/sb.c:299:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:299:19: expected restricted __le64 [usertype] atime_sec fs/ubifs/sb.c:299:19: got int [signed] [assigned] tmp fs/ubifs/sb.c:300:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:300:19: expected restricted __le64 [usertype] ctime_sec fs/ubifs/sb.c:300:19: got int [signed] [assigned] tmp fs/ubifs/sb.c:301:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:301:19: expected restricted __le64 [usertype] mtime_sec fs/ubifs/sb.c:301:19: got int [signed] [assigned] tmp This looks like a bugfix as your tmp was a u32 so there was truncation in the atime, mtime, ctime value, probably not intentional, add a tmp_le64 and use it here. fs/ubifs/key.h:348:9: warning: cast to restricted __le32 fs/ubifs/key.h:348:9: warning: cast to restricted __le32 fs/ubifs/key.h:419:9: warning: cast to restricted __le32 Read from the annotated union member instead. fs/ubifs/recovery.c:175:13: warning: incorrect type in assignment (different base types) fs/ubifs/recovery.c:175:13: expected unsigned int [unsigned] [usertype] save_flags fs/ubifs/recovery.c:175:13: got restricted __le32 [usertype] flags fs/ubifs/recovery.c:186:13: warning: incorrect type in assignment (different base types) fs/ubifs/recovery.c:186:13: expected restricted __le32 [usertype] flags fs/ubifs/recovery.c:186:13: got unsigned int [unsigned] [usertype] save_flags Do byteshifting at compile time of the flag value. Annotate the saved_flags as le32. fs/ubifs/debug.c:368:10: warning: cast to restricted __le32 fs/ubifs/debug.c:368:10: warning: cast from restricted __le64 Should be checked if the truncation was intentional, I've changed the printk to print the full width. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-10-24 21:52:57 +04:00
__le32 save_flags;
dbg_rcvry("recovery");
save_flags = mst->flags;
UBIFS: endian handling fixes and annotations Noticed by sparse: fs/ubifs/file.c:75:2: warning: restricted __le64 degrades to integer fs/ubifs/file.c:629:4: warning: restricted __le64 degrades to integer fs/ubifs/dir.c:431:3: warning: restricted __le64 degrades to integer This should be checked to ensure the ubifs_assert is working as intended, I've done the suggested annotation in this patch. fs/ubifs/sb.c:298:6: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:298:6: expected int [signed] [assigned] tmp fs/ubifs/sb.c:298:6: got restricted __le64 [usertype] <noident> fs/ubifs/sb.c:299:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:299:19: expected restricted __le64 [usertype] atime_sec fs/ubifs/sb.c:299:19: got int [signed] [assigned] tmp fs/ubifs/sb.c:300:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:300:19: expected restricted __le64 [usertype] ctime_sec fs/ubifs/sb.c:300:19: got int [signed] [assigned] tmp fs/ubifs/sb.c:301:19: warning: incorrect type in assignment (different base types) fs/ubifs/sb.c:301:19: expected restricted __le64 [usertype] mtime_sec fs/ubifs/sb.c:301:19: got int [signed] [assigned] tmp This looks like a bugfix as your tmp was a u32 so there was truncation in the atime, mtime, ctime value, probably not intentional, add a tmp_le64 and use it here. fs/ubifs/key.h:348:9: warning: cast to restricted __le32 fs/ubifs/key.h:348:9: warning: cast to restricted __le32 fs/ubifs/key.h:419:9: warning: cast to restricted __le32 Read from the annotated union member instead. fs/ubifs/recovery.c:175:13: warning: incorrect type in assignment (different base types) fs/ubifs/recovery.c:175:13: expected unsigned int [unsigned] [usertype] save_flags fs/ubifs/recovery.c:175:13: got restricted __le32 [usertype] flags fs/ubifs/recovery.c:186:13: warning: incorrect type in assignment (different base types) fs/ubifs/recovery.c:186:13: expected restricted __le32 [usertype] flags fs/ubifs/recovery.c:186:13: got unsigned int [unsigned] [usertype] save_flags Do byteshifting at compile time of the flag value. Annotate the saved_flags as le32. fs/ubifs/debug.c:368:10: warning: cast to restricted __le32 fs/ubifs/debug.c:368:10: warning: cast from restricted __le64 Should be checked if the truncation was intentional, I've changed the printk to print the full width. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-10-24 21:52:57 +04:00
mst->flags |= cpu_to_le32(UBIFS_MST_RCVRY);
err = ubifs_prepare_node_hmac(c, mst, UBIFS_MST_NODE_SZ,
offsetof(struct ubifs_mst_node, hmac), 1);
if (err)
goto out;
err = ubifs_leb_change(c, lnum, mst, sz);
if (err)
goto out;
err = ubifs_leb_change(c, lnum + 1, mst, sz);
if (err)
goto out;
out:
mst->flags = save_flags;
return err;
}
/**
* ubifs_recover_master_node - recover the master node.
* @c: UBIFS file-system description object
*
* This function recovers the master node from corruption that may occur due to
* an unclean unmount.
*
* This function returns %0 on success and a negative error code on failure.
*/
int ubifs_recover_master_node(struct ubifs_info *c)
{
void *buf1 = NULL, *buf2 = NULL, *cor1 = NULL, *cor2 = NULL;
struct ubifs_mst_node *mst1 = NULL, *mst2 = NULL, *mst;
const int sz = c->mst_node_alsz;
int err, offs1, offs2;
dbg_rcvry("recovery");
err = get_master_node(c, UBIFS_MST_LNUM, &buf1, &mst1, &cor1);
if (err)
goto out_free;
err = get_master_node(c, UBIFS_MST_LNUM + 1, &buf2, &mst2, &cor2);
if (err)
goto out_free;
if (mst1) {
offs1 = (void *)mst1 - buf1;
if ((le32_to_cpu(mst1->flags) & UBIFS_MST_RCVRY) &&
(offs1 == 0 && !cor1)) {
/*
* mst1 was written by recovery at offset 0 with no
* corruption.
*/
dbg_rcvry("recovery recovery");
mst = mst1;
} else if (mst2) {
offs2 = (void *)mst2 - buf2;
if (offs1 == offs2) {
/* Same offset, so must be the same */
if (ubifs_compare_master_node(c, mst1, mst2))
goto out_err;
mst = mst1;
} else if (offs2 + sz == offs1) {
/* 1st LEB was written, 2nd was not */
if (cor1)
goto out_err;
mst = mst1;
} else if (offs1 == 0 &&
c->leb_size - offs2 - sz < sz) {
/* 1st LEB was unmapped and written, 2nd not */
if (cor1)
goto out_err;
mst = mst1;
} else
goto out_err;
} else {
/*
* 2nd LEB was unmapped and about to be written, so
* there must be only one master node in the first LEB
* and no corruption.
*/
if (offs1 != 0 || cor1)
goto out_err;
mst = mst1;
}
} else {
if (!mst2)
goto out_err;
/*
* 1st LEB was unmapped and about to be written, so there must
* be no room left in 2nd LEB.
*/
offs2 = (void *)mst2 - buf2;
if (offs2 + sz + sz <= c->leb_size)
goto out_err;
mst = mst2;
}
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_msg(c, "recovered master node from LEB %d",
(mst == mst1 ? UBIFS_MST_LNUM : UBIFS_MST_LNUM + 1));
memcpy(c->mst_node, mst, UBIFS_MST_NODE_SZ);
if (c->ro_mount) {
/* Read-only mode. Keep a copy for switching to rw mode */
c->rcvrd_mst_node = kmalloc(sz, GFP_KERNEL);
if (!c->rcvrd_mst_node) {
err = -ENOMEM;
goto out_free;
}
memcpy(c->rcvrd_mst_node, c->mst_node, UBIFS_MST_NODE_SZ);
/*
* We had to recover the master node, which means there was an
* unclean reboot. However, it is possible that the master node
* is clean at this point, i.e., %UBIFS_MST_DIRTY is not set.
* E.g., consider the following chain of events:
*
* 1. UBIFS was cleanly unmounted, so the master node is clean
* 2. UBIFS is being mounted R/W and starts changing the master
* node in the first (%UBIFS_MST_LNUM). A power cut happens,
* so this LEB ends up with some amount of garbage at the
* end.
* 3. UBIFS is being mounted R/O. We reach this place and
* recover the master node from the second LEB
* (%UBIFS_MST_LNUM + 1). But we cannot update the media
* because we are being mounted R/O. We have to defer the
* operation.
* 4. However, this master node (@c->mst_node) is marked as
* clean (since the step 1). And if we just return, the
* mount code will be confused and won't recover the master
* node when it is re-mounter R/W later.
*
* Thus, to force the recovery by marking the master node as
* dirty.
*/
c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
} else {
/* Write the recovered master node */
c->max_sqnum = le64_to_cpu(mst->ch.sqnum) - 1;
err = write_rcvrd_mst_node(c, c->mst_node);
if (err)
goto out_free;
}
vfree(buf2);
vfree(buf1);
return 0;
out_err:
err = -EINVAL;
out_free:
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "failed to recover master node");
if (mst1) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "dumping first master node");
ubifs_dump_node(c, mst1);
}
if (mst2) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "dumping second master node");
ubifs_dump_node(c, mst2);
}
vfree(buf2);
vfree(buf1);
return err;
}
/**
* ubifs_write_rcvrd_mst_node - write the recovered master node.
* @c: UBIFS file-system description object
*
* This function writes the master node that was recovered during mounting in
* read-only mode and must now be written because we are remounting rw.
*
* This function returns %0 on success and a negative error code on failure.
*/
int ubifs_write_rcvrd_mst_node(struct ubifs_info *c)
{
int err;
if (!c->rcvrd_mst_node)
return 0;
c->rcvrd_mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
err = write_rcvrd_mst_node(c, c->rcvrd_mst_node);
if (err)
return err;
kfree(c->rcvrd_mst_node);
c->rcvrd_mst_node = NULL;
return 0;
}
/**
* is_last_write - determine if an offset was in the last write to a LEB.
* @c: UBIFS file-system description object
* @buf: buffer to check
* @offs: offset to check
*
* This function returns %1 if @offs was in the last write to the LEB whose data
* is in @buf, otherwise %0 is returned. The determination is made by checking
* for subsequent empty space starting from the next @c->max_write_size
* boundary.
*/
static int is_last_write(const struct ubifs_info *c, void *buf, int offs)
{
int empty_offs, check_len;
uint8_t *p;
/*
* Round up to the next @c->max_write_size boundary i.e. @offs is in
* the last wbuf written. After that should be empty space.
*/
empty_offs = ALIGN(offs + 1, c->max_write_size);
check_len = c->leb_size - empty_offs;
p = buf + empty_offs - offs;
return is_empty(p, check_len);
}
/**
* clean_buf - clean the data from an LEB sitting in a buffer.
* @c: UBIFS file-system description object
* @buf: buffer to clean
* @lnum: LEB number to clean
* @offs: offset from which to clean
* @len: length of buffer
*
* This function pads up to the next min_io_size boundary (if there is one) and
* sets empty space to all 0xff. @buf, @offs and @len are updated to the next
* @c->min_io_size boundary.
*/
static void clean_buf(const struct ubifs_info *c, void **buf, int lnum,
int *offs, int *len)
{
int empty_offs, pad_len;
dbg_rcvry("cleaning corruption at %d:%d", lnum, *offs);
ubifs_assert(c, !(*offs & 7));
empty_offs = ALIGN(*offs, c->min_io_size);
pad_len = empty_offs - *offs;
ubifs_pad(c, *buf, pad_len);
*offs += pad_len;
*buf += pad_len;
*len -= pad_len;
memset(*buf, 0xff, c->leb_size - empty_offs);
}
/**
* no_more_nodes - determine if there are no more nodes in a buffer.
* @c: UBIFS file-system description object
* @buf: buffer to check
* @len: length of buffer
* @lnum: LEB number of the LEB from which @buf was read
* @offs: offset from which @buf was read
*
* This function ensures that the corrupted node at @offs is the last thing
* written to a LEB. This function returns %1 if more data is not found and
* %0 if more data is found.
*/
static int no_more_nodes(const struct ubifs_info *c, void *buf, int len,
int lnum, int offs)
{
struct ubifs_ch *ch = buf;
int skip, dlen = le32_to_cpu(ch->len);
/* Check for empty space after the corrupt node's common header */
skip = ALIGN(offs + UBIFS_CH_SZ, c->max_write_size) - offs;
if (is_empty(buf + skip, len - skip))
return 1;
/*
* The area after the common header size is not empty, so the common
* header must be intact. Check it.
*/
if (ubifs_check_node(c, buf, lnum, offs, 1, 0) != -EUCLEAN) {
dbg_rcvry("unexpected bad common header at %d:%d", lnum, offs);
return 0;
}
/* Now we know the corrupt node's length we can skip over it */
skip = ALIGN(offs + dlen, c->max_write_size) - offs;
/* After which there should be empty space */
if (is_empty(buf + skip, len - skip))
return 1;
dbg_rcvry("unexpected data at %d:%d", lnum, offs + skip);
return 0;
}
/**
* fix_unclean_leb - fix an unclean LEB.
* @c: UBIFS file-system description object
* @sleb: scanned LEB information
* @start: offset where scan started
*/
static int fix_unclean_leb(struct ubifs_info *c, struct ubifs_scan_leb *sleb,
int start)
{
int lnum = sleb->lnum, endpt = start;
/* Get the end offset of the last node we are keeping */
if (!list_empty(&sleb->nodes)) {
struct ubifs_scan_node *snod;
snod = list_entry(sleb->nodes.prev,
struct ubifs_scan_node, list);
endpt = snod->offs + snod->len;
}
if (c->ro_mount && !c->remounting_rw) {
/* Add to recovery list */
struct ubifs_unclean_leb *ucleb;
dbg_rcvry("need to fix LEB %d start %d endpt %d",
lnum, start, sleb->endpt);
ucleb = kzalloc(sizeof(struct ubifs_unclean_leb), GFP_NOFS);
if (!ucleb)
return -ENOMEM;
ucleb->lnum = lnum;
ucleb->endpt = endpt;
list_add_tail(&ucleb->list, &c->unclean_leb_list);
} else {
/* Write the fixed LEB back to flash */
int err;
dbg_rcvry("fixing LEB %d start %d endpt %d",
lnum, start, sleb->endpt);
if (endpt == 0) {
err = ubifs_leb_unmap(c, lnum);
if (err)
return err;
} else {
int len = ALIGN(endpt, c->min_io_size);
if (start) {
err = ubifs_leb_read(c, lnum, sleb->buf, 0,
start, 1);
if (err)
return err;
}
/* Pad to min_io_size */
if (len > endpt) {
int pad_len = len - ALIGN(endpt, 8);
if (pad_len > 0) {
void *buf = sleb->buf + len - pad_len;
ubifs_pad(c, buf, pad_len);
}
}
err = ubifs_leb_change(c, lnum, sleb->buf, len);
if (err)
return err;
}
}
return 0;
}
/**
* drop_last_group - drop the last group of nodes.
* @sleb: scanned LEB information
* @offs: offset of dropped nodes is returned here
*
* This is a helper function for 'ubifs_recover_leb()' which drops the last
* group of nodes of the scanned LEB.
*/
static void drop_last_group(struct ubifs_scan_leb *sleb, int *offs)
{
while (!list_empty(&sleb->nodes)) {
struct ubifs_scan_node *snod;
struct ubifs_ch *ch;
snod = list_entry(sleb->nodes.prev, struct ubifs_scan_node,
list);
ch = snod->node;
if (ch->group_type != UBIFS_IN_NODE_GROUP)
break;
dbg_rcvry("dropping grouped node at %d:%d",
sleb->lnum, snod->offs);
*offs = snod->offs;
list_del(&snod->list);
kfree(snod);
sleb->nodes_cnt -= 1;
}
}
/**
* drop_last_node - drop the last node.
* @sleb: scanned LEB information
* @offs: offset of dropped nodes is returned here
*
* This is a helper function for 'ubifs_recover_leb()' which drops the last
* node of the scanned LEB.
*/
static void drop_last_node(struct ubifs_scan_leb *sleb, int *offs)
{
struct ubifs_scan_node *snod;
if (!list_empty(&sleb->nodes)) {
snod = list_entry(sleb->nodes.prev, struct ubifs_scan_node,
list);
dbg_rcvry("dropping last node at %d:%d",
sleb->lnum, snod->offs);
*offs = snod->offs;
list_del(&snod->list);
kfree(snod);
sleb->nodes_cnt -= 1;
}
}
/**
* ubifs_recover_leb - scan and recover a LEB.
* @c: UBIFS file-system description object
* @lnum: LEB number
* @offs: offset
* @sbuf: LEB-sized buffer to use
* @jhead: journal head number this LEB belongs to (%-1 if the LEB does not
* belong to any journal head)
*
* This function does a scan of a LEB, but caters for errors that might have
* been caused by the unclean unmount from which we are attempting to recover.
* Returns the scanned information on success and a negative error code on
* failure.
*/
struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum,
int offs, void *sbuf, int jhead)
{
int ret = 0, err, len = c->leb_size - offs, start = offs, min_io_unit;
int grouped = jhead == -1 ? 0 : c->jheads[jhead].grouped;
struct ubifs_scan_leb *sleb;
void *buf = sbuf + offs;
dbg_rcvry("%d:%d, jhead %d, grouped %d", lnum, offs, jhead, grouped);
sleb = ubifs_start_scan(c, lnum, offs, sbuf);
if (IS_ERR(sleb))
return sleb;
ubifs_assert(c, len >= 8);
while (len >= 8) {
dbg_scan("look at LEB %d:%d (%d bytes left)",
lnum, offs, len);
cond_resched();
/*
* Scan quietly until there is an error from which we cannot
* recover
*/
ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1);
if (ret == SCANNED_A_NODE) {
/* A valid node, and not a padding node */
struct ubifs_ch *ch = buf;
int node_len;
err = ubifs_add_snod(c, sleb, buf, offs);
if (err)
goto error;
node_len = ALIGN(le32_to_cpu(ch->len), 8);
offs += node_len;
buf += node_len;
len -= node_len;
} else if (ret > 0) {
/* Padding bytes or a valid padding node */
offs += ret;
buf += ret;
len -= ret;
} else if (ret == SCANNED_EMPTY_SPACE ||
ret == SCANNED_GARBAGE ||
ret == SCANNED_A_BAD_PAD_NODE ||
ret == SCANNED_A_CORRUPT_NODE) {
dbg_rcvry("found corruption (%d) at %d:%d",
ret, lnum, offs);
break;
} else {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "unexpected return value %d", ret);
err = -EINVAL;
goto error;
}
}
if (ret == SCANNED_GARBAGE || ret == SCANNED_A_BAD_PAD_NODE) {
if (!is_last_write(c, buf, offs))
goto corrupted_rescan;
} else if (ret == SCANNED_A_CORRUPT_NODE) {
if (!no_more_nodes(c, buf, len, lnum, offs))
goto corrupted_rescan;
} else if (!is_empty(buf, len)) {
if (!is_last_write(c, buf, offs)) {
int corruption = first_non_ff(buf, len);
/*
* See header comment for this file for more
* explanations about the reasons we have this check.
*/
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "corrupt empty space LEB %d:%d, corruption starts at %d",
lnum, offs, corruption);
/* Make sure we dump interesting non-0xFF data */
offs += corruption;
buf += corruption;
goto corrupted;
}
}
min_io_unit = round_down(offs, c->min_io_size);
if (grouped)
/*
* If nodes are grouped, always drop the incomplete group at
* the end.
*/
drop_last_group(sleb, &offs);
if (jhead == GCHD) {
/*
* If this LEB belongs to the GC head then while we are in the
* middle of the same min. I/O unit keep dropping nodes. So
* basically, what we want is to make sure that the last min.
* I/O unit where we saw the corruption is dropped completely
* with all the uncorrupted nodes which may possibly sit there.
*
* In other words, let's name the min. I/O unit where the
* corruption starts B, and the previous min. I/O unit A. The
* below code tries to deal with a situation when half of B
* contains valid nodes or the end of a valid node, and the
* second half of B contains corrupted data or garbage. This
* means that UBIFS had been writing to B just before the power
* cut happened. I do not know how realistic is this scenario
* that half of the min. I/O unit had been written successfully
* and the other half not, but this is possible in our 'failure
* mode emulation' infrastructure at least.
*
* So what is the problem, why we need to drop those nodes? Why
* can't we just clean-up the second half of B by putting a
* padding node there? We can, and this works fine with one
* exception which was reproduced with power cut emulation
* testing and happens extremely rarely.
*
* Imagine the file-system is full, we run GC which starts
* moving valid nodes from LEB X to LEB Y (obviously, LEB Y is
* the current GC head LEB). The @c->gc_lnum is -1, which means
* that GC will retain LEB X and will try to continue. Imagine
* that LEB X is currently the dirtiest LEB, and the amount of
* used space in LEB Y is exactly the same as amount of free
* space in LEB X.
*
* And a power cut happens when nodes are moved from LEB X to
* LEB Y. We are here trying to recover LEB Y which is the GC
* head LEB. We find the min. I/O unit B as described above.
* Then we clean-up LEB Y by padding min. I/O unit. And later
* 'ubifs_rcvry_gc_commit()' function fails, because it cannot
* find a dirty LEB which could be GC'd into LEB Y! Even LEB X
* does not match because the amount of valid nodes there does
* not fit the free space in LEB Y any more! And this is
* because of the padding node which we added to LEB Y. The
* user-visible effect of this which I once observed and
* analysed is that we cannot mount the file-system with
* -ENOSPC error.
*
* So obviously, to make sure that situation does not happen we
* should free min. I/O unit B in LEB Y completely and the last
* used min. I/O unit in LEB Y should be A. This is basically
* what the below code tries to do.
*/
while (offs > min_io_unit)
drop_last_node(sleb, &offs);
}
buf = sbuf + offs;
len = c->leb_size - offs;
clean_buf(c, &buf, lnum, &offs, &len);
ubifs_end_scan(c, sleb, lnum, offs);
err = fix_unclean_leb(c, sleb, start);
if (err)
goto error;
return sleb;
corrupted_rescan:
/* Re-scan the corrupted data with verbose messages */
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "corruption %d", ret);
ubifs_scan_a_node(c, buf, len, lnum, offs, 0);
corrupted:
ubifs_scanned_corruption(c, lnum, offs, buf);
err = -EUCLEAN;
error:
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "LEB %d scanning failed", lnum);
ubifs_scan_destroy(sleb);
return ERR_PTR(err);
}
/**
* get_cs_sqnum - get commit start sequence number.
* @c: UBIFS file-system description object
* @lnum: LEB number of commit start node
* @offs: offset of commit start node
* @cs_sqnum: commit start sequence number is returned here
*
* This function returns %0 on success and a negative error code on failure.
*/
static int get_cs_sqnum(struct ubifs_info *c, int lnum, int offs,
unsigned long long *cs_sqnum)
{
struct ubifs_cs_node *cs_node = NULL;
int err, ret;
dbg_rcvry("at %d:%d", lnum, offs);
cs_node = kmalloc(UBIFS_CS_NODE_SZ, GFP_KERNEL);
if (!cs_node)
return -ENOMEM;
if (c->leb_size - offs < UBIFS_CS_NODE_SZ)
goto out_err;
err = ubifs_leb_read(c, lnum, (void *)cs_node, offs,
UBIFS_CS_NODE_SZ, 0);
if (err && err != -EBADMSG)
goto out_free;
ret = ubifs_scan_a_node(c, cs_node, UBIFS_CS_NODE_SZ, lnum, offs, 0);
if (ret != SCANNED_A_NODE) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "Not a valid node");
goto out_err;
}
if (cs_node->ch.node_type != UBIFS_CS_NODE) {
ubifs_err(c, "Not a CS node, type is %d", cs_node->ch.node_type);
goto out_err;
}
if (le64_to_cpu(cs_node->cmt_no) != c->cmt_no) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "CS node cmt_no %llu != current cmt_no %llu",
(unsigned long long)le64_to_cpu(cs_node->cmt_no),
c->cmt_no);
goto out_err;
}
*cs_sqnum = le64_to_cpu(cs_node->ch.sqnum);
dbg_rcvry("commit start sqnum %llu", *cs_sqnum);
kfree(cs_node);
return 0;
out_err:
err = -EINVAL;
out_free:
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "failed to get CS sqnum");
kfree(cs_node);
return err;
}
/**
* ubifs_recover_log_leb - scan and recover a log LEB.
* @c: UBIFS file-system description object
* @lnum: LEB number
* @offs: offset
* @sbuf: LEB-sized buffer to use
*
* This function does a scan of a LEB, but caters for errors that might have
* been caused by unclean reboots from which we are attempting to recover
* (assume that only the last log LEB can be corrupted by an unclean reboot).
*
* This function returns %0 on success and a negative error code on failure.
*/
struct ubifs_scan_leb *ubifs_recover_log_leb(struct ubifs_info *c, int lnum,
int offs, void *sbuf)
{
struct ubifs_scan_leb *sleb;
int next_lnum;
dbg_rcvry("LEB %d", lnum);
next_lnum = lnum + 1;
if (next_lnum >= UBIFS_LOG_LNUM + c->log_lebs)
next_lnum = UBIFS_LOG_LNUM;
if (next_lnum != c->ltail_lnum) {
/*
* We can only recover at the end of the log, so check that the
* next log LEB is empty or out of date.
*/
sleb = ubifs_scan(c, next_lnum, 0, sbuf, 0);
if (IS_ERR(sleb))
return sleb;
if (sleb->nodes_cnt) {
struct ubifs_scan_node *snod;
unsigned long long cs_sqnum = c->cs_sqnum;
snod = list_entry(sleb->nodes.next,
struct ubifs_scan_node, list);
if (cs_sqnum == 0) {
int err;
err = get_cs_sqnum(c, lnum, offs, &cs_sqnum);
if (err) {
ubifs_scan_destroy(sleb);
return ERR_PTR(err);
}
}
if (snod->sqnum > cs_sqnum) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "unrecoverable log corruption in LEB %d",
lnum);
ubifs_scan_destroy(sleb);
return ERR_PTR(-EUCLEAN);
}
}
ubifs_scan_destroy(sleb);
}
return ubifs_recover_leb(c, lnum, offs, sbuf, -1);
}
/**
* recover_head - recover a head.
* @c: UBIFS file-system description object
* @lnum: LEB number of head to recover
* @offs: offset of head to recover
* @sbuf: LEB-sized buffer to use
*
* This function ensures that there is no data on the flash at a head location.
*
* This function returns %0 on success and a negative error code on failure.
*/
static int recover_head(struct ubifs_info *c, int lnum, int offs, void *sbuf)
{
int len = c->max_write_size, err;
if (offs + len > c->leb_size)
len = c->leb_size - offs;
if (!len)
return 0;
/* Read at the head location and check it is empty flash */
err = ubifs_leb_read(c, lnum, sbuf, offs, len, 1);
if (err || !is_empty(sbuf, len)) {
dbg_rcvry("cleaning head at %d:%d", lnum, offs);
if (offs == 0)
return ubifs_leb_unmap(c, lnum);
err = ubifs_leb_read(c, lnum, sbuf, 0, offs, 1);
if (err)
return err;
return ubifs_leb_change(c, lnum, sbuf, offs);
}
return 0;
}
/**
* ubifs_recover_inl_heads - recover index and LPT heads.
* @c: UBIFS file-system description object
* @sbuf: LEB-sized buffer to use
*
* This function ensures that there is no data on the flash at the index and
* LPT head locations.
*
* This deals with the recovery of a half-completed journal commit. UBIFS is
* careful never to overwrite the last version of the index or the LPT. Because
* the index and LPT are wandering trees, data from a half-completed commit will
* not be referenced anywhere in UBIFS. The data will be either in LEBs that are
* assumed to be empty and will be unmapped anyway before use, or in the index
* and LPT heads.
*
* This function returns %0 on success and a negative error code on failure.
*/
int ubifs_recover_inl_heads(struct ubifs_info *c, void *sbuf)
{
int err;
ubifs_assert(c, !c->ro_mount || c->remounting_rw);
dbg_rcvry("checking index head at %d:%d", c->ihead_lnum, c->ihead_offs);
err = recover_head(c, c->ihead_lnum, c->ihead_offs, sbuf);
if (err)
return err;
dbg_rcvry("checking LPT head at %d:%d", c->nhead_lnum, c->nhead_offs);
return recover_head(c, c->nhead_lnum, c->nhead_offs, sbuf);
}
/**
* clean_an_unclean_leb - read and write a LEB to remove corruption.
* @c: UBIFS file-system description object
* @ucleb: unclean LEB information
* @sbuf: LEB-sized buffer to use
*
* This function reads a LEB up to a point pre-determined by the mount recovery,
* checks the nodes, and writes the result back to the flash, thereby cleaning
* off any following corruption, or non-fatal ECC errors.
*
* This function returns %0 on success and a negative error code on failure.
*/
static int clean_an_unclean_leb(struct ubifs_info *c,
struct ubifs_unclean_leb *ucleb, void *sbuf)
{
int err, lnum = ucleb->lnum, offs = 0, len = ucleb->endpt, quiet = 1;
void *buf = sbuf;
dbg_rcvry("LEB %d len %d", lnum, len);
if (len == 0) {
/* Nothing to read, just unmap it */
return ubifs_leb_unmap(c, lnum);
}
err = ubifs_leb_read(c, lnum, buf, offs, len, 0);
if (err && err != -EBADMSG)
return err;
while (len >= 8) {
int ret;
cond_resched();
/* Scan quietly until there is an error */
ret = ubifs_scan_a_node(c, buf, len, lnum, offs, quiet);
if (ret == SCANNED_A_NODE) {
/* A valid node, and not a padding node */
struct ubifs_ch *ch = buf;
int node_len;
node_len = ALIGN(le32_to_cpu(ch->len), 8);
offs += node_len;
buf += node_len;
len -= node_len;
continue;
}
if (ret > 0) {
/* Padding bytes or a valid padding node */
offs += ret;
buf += ret;
len -= ret;
continue;
}
if (ret == SCANNED_EMPTY_SPACE) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "unexpected empty space at %d:%d",
lnum, offs);
return -EUCLEAN;
}
if (quiet) {
/* Redo the last scan but noisily */
quiet = 0;
continue;
}
ubifs_scanned_corruption(c, lnum, offs, buf);
return -EUCLEAN;
}
/* Pad to min_io_size */
len = ALIGN(ucleb->endpt, c->min_io_size);
if (len > ucleb->endpt) {
int pad_len = len - ALIGN(ucleb->endpt, 8);
if (pad_len > 0) {
buf = c->sbuf + len - pad_len;
ubifs_pad(c, buf, pad_len);
}
}
/* Write back the LEB atomically */
err = ubifs_leb_change(c, lnum, sbuf, len);
if (err)
return err;
dbg_rcvry("cleaned LEB %d", lnum);
return 0;
}
/**
* ubifs_clean_lebs - clean LEBs recovered during read-only mount.
* @c: UBIFS file-system description object
* @sbuf: LEB-sized buffer to use
*
* This function cleans a LEB identified during recovery that needs to be
* written but was not because UBIFS was mounted read-only. This happens when
* remounting to read-write mode.
*
* This function returns %0 on success and a negative error code on failure.
*/
int ubifs_clean_lebs(struct ubifs_info *c, void *sbuf)
{
dbg_rcvry("recovery");
while (!list_empty(&c->unclean_leb_list)) {
struct ubifs_unclean_leb *ucleb;
int err;
ucleb = list_entry(c->unclean_leb_list.next,
struct ubifs_unclean_leb, list);
err = clean_an_unclean_leb(c, ucleb, sbuf);
if (err)
return err;
list_del(&ucleb->list);
kfree(ucleb);
}
return 0;
}
/**
* grab_empty_leb - grab an empty LEB to use as GC LEB and run commit.
* @c: UBIFS file-system description object
*
* This is a helper function for 'ubifs_rcvry_gc_commit()' which grabs an empty
* LEB to be used as GC LEB (@c->gc_lnum), and then runs the commit. Returns
* zero in case of success and a negative error code in case of failure.
*/
static int grab_empty_leb(struct ubifs_info *c)
{
int lnum, err;
/*
* Note, it is very important to first search for an empty LEB and then
* run the commit, not vice-versa. The reason is that there might be
* only one empty LEB at the moment, the one which has been the
* @c->gc_lnum just before the power cut happened. During the regular
* UBIFS operation (not now) @c->gc_lnum is marked as "taken", so no
* one but GC can grab it. But at this moment this single empty LEB is
* not marked as taken, so if we run commit - what happens? Right, the
* commit will grab it and write the index there. Remember that the
* index always expands as long as there is free space, and it only
* starts consolidating when we run out of space.
*
* IOW, if we run commit now, we might not be able to find a free LEB
* after this.
*/
lnum = ubifs_find_free_leb_for_idx(c);
if (lnum < 0) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "could not find an empty LEB");
ubifs_dump_lprops(c);
ubifs_dump_budg(c, &c->bi);
return lnum;
}
/* Reset the index flag */
err = ubifs_change_one_lp(c, lnum, LPROPS_NC, LPROPS_NC, 0,
LPROPS_INDEX, 0);
if (err)
return err;
c->gc_lnum = lnum;
dbg_rcvry("found empty LEB %d, run commit", lnum);
return ubifs_run_commit(c);
}
/**
* ubifs_rcvry_gc_commit - recover the GC LEB number and run the commit.
* @c: UBIFS file-system description object
*
* Out-of-place garbage collection requires always one empty LEB with which to
* start garbage collection. The LEB number is recorded in c->gc_lnum and is
* written to the master node on unmounting. In the case of an unclean unmount
* the value of gc_lnum recorded in the master node is out of date and cannot
* be used. Instead, recovery must allocate an empty LEB for this purpose.
* However, there may not be enough empty space, in which case it must be
* possible to GC the dirtiest LEB into the GC head LEB.
*
* This function also runs the commit which causes the TNC updates from
* size-recovery and orphans to be written to the flash. That is important to
* ensure correct replay order for subsequent mounts.
*
* This function returns %0 on success and a negative error code on failure.
*/
int ubifs_rcvry_gc_commit(struct ubifs_info *c)
{
struct ubifs_wbuf *wbuf = &c->jheads[GCHD].wbuf;
struct ubifs_lprops lp;
int err;
dbg_rcvry("GC head LEB %d, offs %d", wbuf->lnum, wbuf->offs);
c->gc_lnum = -1;
if (wbuf->lnum == -1 || wbuf->offs == c->leb_size)
return grab_empty_leb(c);
err = ubifs_find_dirty_leb(c, &lp, wbuf->offs, 2);
if (err) {
if (err != -ENOSPC)
return err;
dbg_rcvry("could not find a dirty LEB");
return grab_empty_leb(c);
}
ubifs_assert(c, !(lp.flags & LPROPS_INDEX));
ubifs_assert(c, lp.free + lp.dirty >= wbuf->offs);
/*
* We run the commit before garbage collection otherwise subsequent
* mounts will see the GC and orphan deletion in a different order.
*/
dbg_rcvry("committing");
err = ubifs_run_commit(c);
if (err)
return err;
dbg_rcvry("GC'ing LEB %d", lp.lnum);
mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
err = ubifs_garbage_collect_leb(c, &lp);
if (err >= 0) {
int err2 = ubifs_wbuf_sync_nolock(wbuf);
if (err2)
err = err2;
}
mutex_unlock(&wbuf->io_mutex);
if (err < 0) {
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_err(c, "GC failed, error %d", err);
if (err == -EAGAIN)
err = -EINVAL;
return err;
}
ubifs_assert(c, err == LEB_RETAINED);
if (err != LEB_RETAINED)
return -EINVAL;
err = ubifs_leb_unmap(c, c->gc_lnum);
if (err)
return err;
dbg_rcvry("allocated LEB %d for GC", lp.lnum);
return 0;
}
/**
* struct size_entry - inode size information for recovery.
* @rb: link in the RB-tree of sizes
* @inum: inode number
* @i_size: size on inode
* @d_size: maximum size based on data nodes
* @exists: indicates whether the inode exists
* @inode: inode if pinned in memory awaiting rw mode to fix it
*/
struct size_entry {
struct rb_node rb;
ino_t inum;
loff_t i_size;
loff_t d_size;
int exists;
struct inode *inode;
};
/**
* add_ino - add an entry to the size tree.
* @c: UBIFS file-system description object
* @inum: inode number
* @i_size: size on inode
* @d_size: maximum size based on data nodes
* @exists: indicates whether the inode exists
*/
static int add_ino(struct ubifs_info *c, ino_t inum, loff_t i_size,
loff_t d_size, int exists)
{
struct rb_node **p = &c->size_tree.rb_node, *parent = NULL;
struct size_entry *e;
while (*p) {
parent = *p;
e = rb_entry(parent, struct size_entry, rb);
if (inum < e->inum)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
e = kzalloc(sizeof(struct size_entry), GFP_KERNEL);
if (!e)
return -ENOMEM;
e->inum = inum;
e->i_size = i_size;
e->d_size = d_size;
e->exists = exists;
rb_link_node(&e->rb, parent, p);
rb_insert_color(&e->rb, &c->size_tree);
return 0;
}
/**
* find_ino - find an entry on the size tree.
* @c: UBIFS file-system description object
* @inum: inode number
*/
static struct size_entry *find_ino(struct ubifs_info *c, ino_t inum)
{
struct rb_node *p = c->size_tree.rb_node;
struct size_entry *e;
while (p) {
e = rb_entry(p, struct size_entry, rb);
if (inum < e->inum)
p = p->rb_left;
else if (inum > e->inum)
p = p->rb_right;
else
return e;
}
return NULL;
}
/**
* remove_ino - remove an entry from the size tree.
* @c: UBIFS file-system description object
* @inum: inode number
*/
static void remove_ino(struct ubifs_info *c, ino_t inum)
{
struct size_entry *e = find_ino(c, inum);
if (!e)
return;
rb_erase(&e->rb, &c->size_tree);
kfree(e);
}
/**
* ubifs_destroy_size_tree - free resources related to the size tree.
* @c: UBIFS file-system description object
*/
void ubifs_destroy_size_tree(struct ubifs_info *c)
{
struct size_entry *e, *n;
rbtree_postorder_for_each_entry_safe(e, n, &c->size_tree, rb) {
iput(e->inode);
kfree(e);
}
c->size_tree = RB_ROOT;
}
/**
* ubifs_recover_size_accum - accumulate inode sizes for recovery.
* @c: UBIFS file-system description object
* @key: node key
* @deletion: node is for a deletion
* @new_size: inode size
*
* This function has two purposes:
* 1) to ensure there are no data nodes that fall outside the inode size
* 2) to ensure there are no data nodes for inodes that do not exist
* To accomplish those purposes, a rb-tree is constructed containing an entry
* for each inode number in the journal that has not been deleted, and recording
* the size from the inode node, the maximum size of any data node (also altered
* by truncations) and a flag indicating a inode number for which no inode node
* was present in the journal.
*
* Note that there is still the possibility that there are data nodes that have
* been committed that are beyond the inode size, however the only way to find
* them would be to scan the entire index. Alternatively, some provision could
* be made to record the size of inodes at the start of commit, which would seem
* very cumbersome for a scenario that is quite unlikely and the only negative
* consequence of which is wasted space.
*
* This functions returns %0 on success and a negative error code on failure.
*/
int ubifs_recover_size_accum(struct ubifs_info *c, union ubifs_key *key,
int deletion, loff_t new_size)
{
ino_t inum = key_inum(c, key);
struct size_entry *e;
int err;
switch (key_type(c, key)) {
case UBIFS_INO_KEY:
if (deletion)
remove_ino(c, inum);
else {
e = find_ino(c, inum);
if (e) {
e->i_size = new_size;
e->exists = 1;
} else {
err = add_ino(c, inum, new_size, 0, 1);
if (err)
return err;
}
}
break;
case UBIFS_DATA_KEY:
e = find_ino(c, inum);
if (e) {
if (new_size > e->d_size)
e->d_size = new_size;
} else {
err = add_ino(c, inum, 0, new_size, 0);
if (err)
return err;
}
break;
case UBIFS_TRUN_KEY:
e = find_ino(c, inum);
if (e)
e->d_size = new_size;
break;
}
return 0;
}
/**
* fix_size_in_place - fix inode size in place on flash.
* @c: UBIFS file-system description object
* @e: inode size information for recovery
*/
static int fix_size_in_place(struct ubifs_info *c, struct size_entry *e)
{
struct ubifs_ino_node *ino = c->sbuf;
unsigned char *p;
union ubifs_key key;
int err, lnum, offs, len;
loff_t i_size;
uint32_t crc;
/* Locate the inode node LEB number and offset */
ino_key_init(c, &key, e->inum);
err = ubifs_tnc_locate(c, &key, ino, &lnum, &offs);
if (err)
goto out;
/*
* If the size recorded on the inode node is greater than the size that
* was calculated from nodes in the journal then don't change the inode.
*/
i_size = le64_to_cpu(ino->size);
if (i_size >= e->d_size)
return 0;
/* Read the LEB */
err = ubifs_leb_read(c, lnum, c->sbuf, 0, c->leb_size, 1);
if (err)
goto out;
/* Change the size field and recalculate the CRC */
ino = c->sbuf + offs;
ino->size = cpu_to_le64(e->d_size);
len = le32_to_cpu(ino->ch.len);
crc = crc32(UBIFS_CRC32_INIT, (void *)ino + 8, len - 8);
ino->ch.crc = cpu_to_le32(crc);
/* Work out where data in the LEB ends and free space begins */
p = c->sbuf;
len = c->leb_size - 1;
while (p[len] == 0xff)
len -= 1;
len = ALIGN(len + 1, c->min_io_size);
/* Atomically write the fixed LEB back again */
err = ubifs_leb_change(c, lnum, c->sbuf, len);
if (err)
goto out;
dbg_rcvry("inode %lu at %d:%d size %lld -> %lld",
UBIFS: fix compilation warnings We print 'ino_t' type using '%lu' printk() placeholder, but this results in many warnings when compiling for Alpha platform. Fix this by adding (unsingned long) casts. Fixes these warnings: fs/ubifs/journal.c:693: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/journal.c:1131: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/dir.c:163: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2700: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/replay.c:1066: warning: format '%lu' expects type 'long unsigned int', but argument 7 has type 'ino_t' fs/ubifs/orphan.c:108: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:135: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:142: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:154: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:159: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:451: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:539: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:612: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:843: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:856: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1438: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1443: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1475: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1495: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:1591: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1671: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1674: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1699: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1788: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1821: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1833: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1924: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1932: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1938: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1945: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1953: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1960: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1967: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1973: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1988: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1991: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:2009: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ino_t' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-10-29 13:08:43 +03:00
(unsigned long)e->inum, lnum, offs, i_size, e->d_size);
return 0;
out:
UBIFS: extend debug/message capabilities In the case where we have more than one volumes on different UBI devices, it may be not that easy to tell which volume prints the messages. Add ubi number and volume id in ubifs_msg/warn/error to help debug. These two values are passed by struct ubifs_info. For those where ubifs_info is not initialized yet, ubifs_* is replaced by pr_*. For those where ubifs_info is not avaliable, ubifs_info is passed to the calling function as a const parameter. The output looks like, [ 95.444879] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 696 [ 95.484688] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "test1" [ 95.484694] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.484699] UBIFS (ubi0:1): FS size: 30220288 bytes (28 MiB, 238 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs) [ 95.484703] UBIFS (ubi0:1): reserved for root: 1427378 bytes (1393 KiB) [ 95.484709] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 40DFFC0E-70BE-4193-8905-F7D6DFE60B17, small LPT model [ 95.489875] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 699 [ 95.529713] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "test2" [ 95.529718] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 95.529724] UBIFS (ubi1:0): FS size: 19808256 bytes (18 MiB, 156 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs) [ 95.529727] UBIFS (ubi1:0): reserved for root: 935592 bytes (913 KiB) [ 95.529733] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID EEB7779D-F419-4CA9-811B-831CAC7233D4, small LPT model [ 954.264767] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node type (255 but expected 6) [ 954.367030] UBIFS error (ubi1:0 pid 756): ubifs_read_node: bad node at LEB 0:0, LEB mapping status 1 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2015-03-20 13:39:42 +03:00
ubifs_warn(c, "inode %lu failed to fix size %lld -> %lld error %d",
UBIFS: fix compilation warnings We print 'ino_t' type using '%lu' printk() placeholder, but this results in many warnings when compiling for Alpha platform. Fix this by adding (unsingned long) casts. Fixes these warnings: fs/ubifs/journal.c:693: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/journal.c:1131: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/dir.c:163: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2700: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/replay.c:1066: warning: format '%lu' expects type 'long unsigned int', but argument 7 has type 'ino_t' fs/ubifs/orphan.c:108: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:135: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:142: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:154: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:159: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:451: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:539: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:612: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:843: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:856: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1438: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1443: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1475: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1495: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:1591: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1671: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1674: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1699: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1788: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1821: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1833: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1924: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1932: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1938: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1945: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1953: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1960: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1967: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1973: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1988: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1991: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:2009: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ino_t' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-10-29 13:08:43 +03:00
(unsigned long)e->inum, e->i_size, e->d_size, err);
return err;
}
/**
* inode_fix_size - fix inode size
* @c: UBIFS file-system description object
* @e: inode size information for recovery
*/
static int inode_fix_size(struct ubifs_info *c, struct size_entry *e)
{
struct inode *inode;
struct ubifs_inode *ui;
int err;
if (c->ro_mount)
ubifs_assert(c, !e->inode);
if (e->inode) {
/* Remounting rw, pick up inode we stored earlier */
inode = e->inode;
} else {
inode = ubifs_iget(c->vfs_sb, e->inum);
if (IS_ERR(inode))
return PTR_ERR(inode);
if (inode->i_size >= e->d_size) {
/*
* The original inode in the index already has a size
* big enough, nothing to do
*/
iput(inode);
return 0;
}
dbg_rcvry("ino %lu size %lld -> %lld",
(unsigned long)e->inum,
inode->i_size, e->d_size);
ui = ubifs_inode(inode);
inode->i_size = e->d_size;
ui->ui_size = e->d_size;
ui->synced_i_size = e->d_size;
e->inode = inode;
}
/*
* In readonly mode just keep the inode pinned in memory until we go
* readwrite. In readwrite mode write the inode to the journal with the
* fixed size.
*/
if (c->ro_mount)
return 0;
err = ubifs_jnl_write_inode(c, inode);
iput(inode);
if (err)
return err;
rb_erase(&e->rb, &c->size_tree);
kfree(e);
return 0;
}
/**
* ubifs_recover_size - recover inode size.
* @c: UBIFS file-system description object
* @in_place: If true, do a in-place size fixup
*
* This function attempts to fix inode size discrepancies identified by the
* 'ubifs_recover_size_accum()' function.
*
* This functions returns %0 on success and a negative error code on failure.
*/
int ubifs_recover_size(struct ubifs_info *c, bool in_place)
{
struct rb_node *this = rb_first(&c->size_tree);
while (this) {
struct size_entry *e;
int err;
e = rb_entry(this, struct size_entry, rb);
this = rb_next(this);
if (!e->exists) {
union ubifs_key key;
ino_key_init(c, &key, e->inum);
err = ubifs_tnc_lookup(c, &key, c->sbuf);
if (err && err != -ENOENT)
return err;
if (err == -ENOENT) {
/* Remove data nodes that have no inode */
UBIFS: fix compilation warnings We print 'ino_t' type using '%lu' printk() placeholder, but this results in many warnings when compiling for Alpha platform. Fix this by adding (unsingned long) casts. Fixes these warnings: fs/ubifs/journal.c:693: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/journal.c:1131: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/dir.c:163: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/tnc.c:2700: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/replay.c:1066: warning: format '%lu' expects type 'long unsigned int', but argument 7 has type 'ino_t' fs/ubifs/orphan.c:108: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:135: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:142: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:154: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:159: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:451: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:539: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:612: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:843: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/orphan.c:856: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1438: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1443: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1475: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/recovery.c:1495: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:105: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:114: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:118: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'ino_t' fs/ubifs/debug.c:1591: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1671: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1674: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1680: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1699: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1788: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1821: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1833: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:1924: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1932: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1938: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1945: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1953: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1960: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1967: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1973: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1988: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'ino_t' fs/ubifs/debug.c:1991: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'ino_t' fs/ubifs/debug.c:2009: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ino_t' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-10-29 13:08:43 +03:00
dbg_rcvry("removing ino %lu",
(unsigned long)e->inum);
err = ubifs_tnc_remove_ino(c, e->inum);
if (err)
return err;
} else {
struct ubifs_ino_node *ino = c->sbuf;
e->exists = 1;
e->i_size = le64_to_cpu(ino->size);
}
}
if (e->exists && e->i_size < e->d_size) {
ubifs_assert(c, !(c->ro_mount && in_place));
/*
* We found data that is outside the found inode size,
* fixup the inode size
*/
if (in_place) {
err = fix_size_in_place(c, e);
if (err)
return err;
iput(e->inode);
} else {
err = inode_fix_size(c, e);
if (err)
return err;
continue;
}
}
rb_erase(&e->rb, &c->size_tree);
kfree(e);
}
return 0;
}