WSL2-Linux-Kernel/include/linux/timekeeping.h

357 строки
7.9 KiB
C
Исходник Обычный вид История

#ifndef _LINUX_TIMEKEEPING_H
#define _LINUX_TIMEKEEPING_H
#include <linux/errno.h>
/* Included from linux/ktime.h */
void timekeeping_init(void);
extern int timekeeping_suspended;
/*
* Get and set timeofday
*/
extern void do_gettimeofday(struct timeval *tv);
extern int do_settimeofday64(const struct timespec64 *ts);
extern int do_sys_settimeofday64(const struct timespec64 *tv,
const struct timezone *tz);
static inline int do_sys_settimeofday(const struct timespec *tv,
const struct timezone *tz)
{
struct timespec64 ts64;
if (!tv)
return do_sys_settimeofday64(NULL, tz);
if (!timespec_valid(tv))
return -EINVAL;
ts64 = timespec_to_timespec64(*tv);
return do_sys_settimeofday64(&ts64, tz);
}
/*
* Kernel time accessors
*/
unsigned long get_seconds(void);
struct timespec64 current_kernel_time64(void);
/* does not take xtime_lock */
struct timespec __current_kernel_time(void);
static inline struct timespec current_kernel_time(void)
{
struct timespec64 now = current_kernel_time64();
return timespec64_to_timespec(now);
}
/*
* timespec based interfaces
*/
struct timespec64 get_monotonic_coarse64(void);
extern void getrawmonotonic64(struct timespec64 *ts);
extern void ktime_get_ts64(struct timespec64 *ts);
extern time64_t ktime_get_seconds(void);
extern time64_t ktime_get_real_seconds(void);
extern int __getnstimeofday64(struct timespec64 *tv);
extern void getnstimeofday64(struct timespec64 *tv);
extern void getboottime64(struct timespec64 *ts);
#if BITS_PER_LONG == 64
/**
* Deprecated. Use do_settimeofday64().
*/
static inline int do_settimeofday(const struct timespec *ts)
{
return do_settimeofday64(ts);
}
static inline int __getnstimeofday(struct timespec *ts)
{
return __getnstimeofday64(ts);
}
static inline void getnstimeofday(struct timespec *ts)
{
getnstimeofday64(ts);
}
static inline void ktime_get_ts(struct timespec *ts)
{
ktime_get_ts64(ts);
}
static inline void ktime_get_real_ts(struct timespec *ts)
{
getnstimeofday64(ts);
}
static inline void getrawmonotonic(struct timespec *ts)
{
getrawmonotonic64(ts);
}
static inline struct timespec get_monotonic_coarse(void)
{
return get_monotonic_coarse64();
}
static inline void getboottime(struct timespec *ts)
{
return getboottime64(ts);
}
#else
/**
* Deprecated. Use do_settimeofday64().
*/
static inline int do_settimeofday(const struct timespec *ts)
{
struct timespec64 ts64;
ts64 = timespec_to_timespec64(*ts);
return do_settimeofday64(&ts64);
}
static inline int __getnstimeofday(struct timespec *ts)
{
struct timespec64 ts64;
int ret = __getnstimeofday64(&ts64);
*ts = timespec64_to_timespec(ts64);
return ret;
}
static inline void getnstimeofday(struct timespec *ts)
{
struct timespec64 ts64;
getnstimeofday64(&ts64);
*ts = timespec64_to_timespec(ts64);
}
static inline void ktime_get_ts(struct timespec *ts)
{
struct timespec64 ts64;
ktime_get_ts64(&ts64);
*ts = timespec64_to_timespec(ts64);
}
static inline void ktime_get_real_ts(struct timespec *ts)
{
struct timespec64 ts64;
getnstimeofday64(&ts64);
*ts = timespec64_to_timespec(ts64);
}
static inline void getrawmonotonic(struct timespec *ts)
{
struct timespec64 ts64;
getrawmonotonic64(&ts64);
*ts = timespec64_to_timespec(ts64);
}
static inline struct timespec get_monotonic_coarse(void)
{
return timespec64_to_timespec(get_monotonic_coarse64());
}
static inline void getboottime(struct timespec *ts)
{
struct timespec64 ts64;
getboottime64(&ts64);
*ts = timespec64_to_timespec(ts64);
}
#endif
#define ktime_get_real_ts64(ts) getnstimeofday64(ts)
/*
* ktime_t based interfaces
*/
enum tk_offsets {
TK_OFFS_REAL,
TK_OFFS_BOOT,
TK_OFFS_TAI,
TK_OFFS_MAX,
};
extern ktime_t ktime_get(void);
extern ktime_t ktime_get_with_offset(enum tk_offsets offs);
extern ktime_t ktime_mono_to_any(ktime_t tmono, enum tk_offsets offs);
extern ktime_t ktime_get_raw(void);
extern u32 ktime_get_resolution_ns(void);
/**
* ktime_get_real - get the real (wall-) time in ktime_t format
*/
static inline ktime_t ktime_get_real(void)
{
return ktime_get_with_offset(TK_OFFS_REAL);
}
/**
* ktime_get_boottime - Returns monotonic time since boot in ktime_t format
*
* This is similar to CLOCK_MONTONIC/ktime_get, but also includes the
* time spent in suspend.
*/
static inline ktime_t ktime_get_boottime(void)
{
return ktime_get_with_offset(TK_OFFS_BOOT);
}
/**
* ktime_get_clocktai - Returns the TAI time of day in ktime_t format
*/
static inline ktime_t ktime_get_clocktai(void)
{
return ktime_get_with_offset(TK_OFFS_TAI);
}
/**
* ktime_mono_to_real - Convert monotonic time to clock realtime
*/
static inline ktime_t ktime_mono_to_real(ktime_t mono)
{
return ktime_mono_to_any(mono, TK_OFFS_REAL);
}
static inline u64 ktime_get_ns(void)
{
return ktime_to_ns(ktime_get());
}
static inline u64 ktime_get_real_ns(void)
{
return ktime_to_ns(ktime_get_real());
}
static inline u64 ktime_get_boot_ns(void)
{
return ktime_to_ns(ktime_get_boottime());
}
static inline u64 ktime_get_tai_ns(void)
{
return ktime_to_ns(ktime_get_clocktai());
}
static inline u64 ktime_get_raw_ns(void)
{
return ktime_to_ns(ktime_get_raw());
}
timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC Tracers want a correlated time between the kernel instrumentation and user space. We really do not want to export sched_clock() to user space, so we need to provide something sensible for this. Using separate data structures with an non blocking sequence count based update mechanism allows us to do that. The data structure required for the readout has a sequence counter and two copies of the timekeeping data. On the update side: smp_wmb(); tkf->seq++; smp_wmb(); update(tkf->base[0], tk); smp_wmb(); tkf->seq++; smp_wmb(); update(tkf->base[1], tk); On the reader side: do { seq = tkf->seq; smp_rmb(); idx = seq & 0x01; now = now(tkf->base[idx]); smp_rmb(); } while (seq != tkf->seq) So if a NMI hits the update of base[0] it will use base[1] which is still consistent, but this timestamp is not guaranteed to be monotonic across an update. The timestamp is calculated by: now = base_mono + clock_delta * slope So if the update lowers the slope, readers who are forced to the not yet updated second array are still using the old steeper slope. tmono ^ | o n | o n | u | o |o |12345678---> reader order o = old slope u = update n = new slope So reader 6 will observe time going backwards versus reader 5. While other CPUs are likely to be able observe that, the only way for a CPU local observation is when an NMI hits in the middle of the update. Timestamps taken from that NMI context might be ahead of the following timestamps. Callers need to be aware of that and deal with it. V2: Got rid of clock monotonic raw and reorganized the data structures. Folded in the barrier fix from Mathieu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-17 01:05:23 +04:00
extern u64 ktime_get_mono_fast_ns(void);
extern u64 ktime_get_raw_fast_ns(void);
extern u64 ktime_get_boot_fast_ns(void);
timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC Tracers want a correlated time between the kernel instrumentation and user space. We really do not want to export sched_clock() to user space, so we need to provide something sensible for this. Using separate data structures with an non blocking sequence count based update mechanism allows us to do that. The data structure required for the readout has a sequence counter and two copies of the timekeeping data. On the update side: smp_wmb(); tkf->seq++; smp_wmb(); update(tkf->base[0], tk); smp_wmb(); tkf->seq++; smp_wmb(); update(tkf->base[1], tk); On the reader side: do { seq = tkf->seq; smp_rmb(); idx = seq & 0x01; now = now(tkf->base[idx]); smp_rmb(); } while (seq != tkf->seq) So if a NMI hits the update of base[0] it will use base[1] which is still consistent, but this timestamp is not guaranteed to be monotonic across an update. The timestamp is calculated by: now = base_mono + clock_delta * slope So if the update lowers the slope, readers who are forced to the not yet updated second array are still using the old steeper slope. tmono ^ | o n | o n | u | o |o |12345678---> reader order o = old slope u = update n = new slope So reader 6 will observe time going backwards versus reader 5. While other CPUs are likely to be able observe that, the only way for a CPU local observation is when an NMI hits in the middle of the update. Timestamps taken from that NMI context might be ahead of the following timestamps. Callers need to be aware of that and deal with it. V2: Got rid of clock monotonic raw and reorganized the data structures. Folded in the barrier fix from Mathieu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-17 01:05:23 +04:00
/*
* Timespec interfaces utilizing the ktime based ones
*/
static inline void get_monotonic_boottime(struct timespec *ts)
{
*ts = ktime_to_timespec(ktime_get_boottime());
}
static inline void get_monotonic_boottime64(struct timespec64 *ts)
{
*ts = ktime_to_timespec64(ktime_get_boottime());
}
static inline void timekeeping_clocktai(struct timespec *ts)
{
*ts = ktime_to_timespec(ktime_get_clocktai());
}
/*
* RTC specific
*/
extern bool timekeeping_rtc_skipsuspend(void);
extern bool timekeeping_rtc_skipresume(void);
extern void timekeeping_inject_sleeptime64(struct timespec64 *delta);
/*
* PPS accessor
*/
extern void ktime_get_raw_and_real_ts64(struct timespec64 *ts_raw,
struct timespec64 *ts_real);
/*
* struct system_time_snapshot - simultaneous raw/real time capture with
* counter value
* @cycles: Clocksource counter value to produce the system times
* @real: Realtime system time
* @raw: Monotonic raw system time
time: Add history to cross timestamp interface supporting slower devices Another representative use case of time sync and the correlated clocksource (in addition to PTP noted above) is PTP synchronized audio. In a streaming application, as an example, samples will be sent and/or received by multiple devices with a presentation time that is in terms of the PTP master clock. Synchronizing the audio output on these devices requires correlating the audio clock with the PTP master clock. The more precise this correlation is, the better the audio quality (i.e. out of sync audio sounds bad). From an application standpoint, to correlate the PTP master clock with the audio device clock, the system clock is used as a intermediate timebase. The transforms such an application would perform are: System Clock <-> Audio clock System Clock <-> Network Device Clock [<-> PTP Master Clock] Modern Intel platforms can perform a more accurate cross timestamp in hardware (ART,audio device clock). The audio driver requires ART->system time transforms -- the same as required for the network driver. These platforms offload audio processing (including cross-timestamps) to a DSP which to ensure uninterrupted audio processing, communicates and response to the host only once every millsecond. As a result is takes up to a millisecond for the DSP to receive a request, the request is processed by the DSP, the audio output hardware is polled for completion, the result is copied into shared memory, and the host is notified. All of these operation occur on a millisecond cadence. This transaction requires about 2 ms, but under heavier workloads it may take up to 4 ms. Adding a history allows these slow devices the option of providing an ART value outside of the current interval. In this case, the callback provided is an accessor function for the previously obtained counter value. If get_system_device_crosststamp() receives a counter value previous to cycle_last, it consults the history provided as an argument in history_ref and interpolates the realtime and monotonic raw system time using the provided counter value. If there are any clock discontinuities, e.g. from calling settimeofday(), the monotonic raw time is interpolated in the usual way, but the realtime clock time is adjusted by scaling the monotonic raw adjustment. When an accessor function is used a history argument *must* be provided. The history is initialized using ktime_get_snapshot() and must be called before the counter values are read. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Fixed up cycles_t/cycle_t type confusion] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 14:15:23 +03:00
* @clock_was_set_seq: The sequence number of clock was set events
* @cs_was_changed_seq: The sequence number of clocksource change events
*/
struct system_time_snapshot {
u64 cycles;
ktime_t real;
ktime_t raw;
time: Add history to cross timestamp interface supporting slower devices Another representative use case of time sync and the correlated clocksource (in addition to PTP noted above) is PTP synchronized audio. In a streaming application, as an example, samples will be sent and/or received by multiple devices with a presentation time that is in terms of the PTP master clock. Synchronizing the audio output on these devices requires correlating the audio clock with the PTP master clock. The more precise this correlation is, the better the audio quality (i.e. out of sync audio sounds bad). From an application standpoint, to correlate the PTP master clock with the audio device clock, the system clock is used as a intermediate timebase. The transforms such an application would perform are: System Clock <-> Audio clock System Clock <-> Network Device Clock [<-> PTP Master Clock] Modern Intel platforms can perform a more accurate cross timestamp in hardware (ART,audio device clock). The audio driver requires ART->system time transforms -- the same as required for the network driver. These platforms offload audio processing (including cross-timestamps) to a DSP which to ensure uninterrupted audio processing, communicates and response to the host only once every millsecond. As a result is takes up to a millisecond for the DSP to receive a request, the request is processed by the DSP, the audio output hardware is polled for completion, the result is copied into shared memory, and the host is notified. All of these operation occur on a millisecond cadence. This transaction requires about 2 ms, but under heavier workloads it may take up to 4 ms. Adding a history allows these slow devices the option of providing an ART value outside of the current interval. In this case, the callback provided is an accessor function for the previously obtained counter value. If get_system_device_crosststamp() receives a counter value previous to cycle_last, it consults the history provided as an argument in history_ref and interpolates the realtime and monotonic raw system time using the provided counter value. If there are any clock discontinuities, e.g. from calling settimeofday(), the monotonic raw time is interpolated in the usual way, but the realtime clock time is adjusted by scaling the monotonic raw adjustment. When an accessor function is used a history argument *must* be provided. The history is initialized using ktime_get_snapshot() and must be called before the counter values are read. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Fixed up cycles_t/cycle_t type confusion] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 14:15:23 +03:00
unsigned int clock_was_set_seq;
u8 cs_was_changed_seq;
};
time: Add driver cross timestamp interface for higher precision time synchronization ACKNOWLEDGMENT: cross timestamp code was developed by Thomas Gleixner <tglx@linutronix.de>. It has changed considerably and any mistakes are mine. The precision with which events on multiple networked systems can be synchronized using, as an example, PTP (IEEE 1588, 802.1AS) is limited by the precision of the cross timestamps between the system clock and the device (timestamp) clock. Precision here is the degree of simultaneity when capturing the cross timestamp. Currently the PTP cross timestamp is captured in software using the PTP device driver ioctl PTP_SYS_OFFSET. Reads of the device clock are interleaved with reads of the realtime clock. At best, the precision of this cross timestamp is on the order of several microseconds due to software latencies. Sub-microsecond precision is required for industrial control and some media applications. To achieve this level of precision hardware supported cross timestamping is needed. The function get_device_system_crosstimestamp() allows device drivers to return a cross timestamp with system time properly scaled to nanoseconds. The realtime value is needed to discipline that clock using PTP and the monotonic raw value is used for applications that don't require a "real" time, but need an unadjusted clock time. The get_device_system_crosstimestamp() code calls back into the driver to ensure that the system counter is within the current timekeeping update interval. Modern Intel hardware provides an Always Running Timer (ART) which is exactly related to TSC through a known frequency ratio. The ART is routed to devices on the system and is used to precisely and simultaneously capture the device clock with the ART. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Reworked to remove extra structures and simplify calling] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 14:15:22 +03:00
/*
* struct system_device_crosststamp - system/device cross-timestamp
* (syncronized capture)
* @device: Device time
* @sys_realtime: Realtime simultaneous with device time
* @sys_monoraw: Monotonic raw simultaneous with device time
*/
struct system_device_crosststamp {
ktime_t device;
ktime_t sys_realtime;
ktime_t sys_monoraw;
};
/*
* struct system_counterval_t - system counter value with the pointer to the
* corresponding clocksource
* @cycles: System counter value
* @cs: Clocksource corresponding to system counter value. Used by
* timekeeping code to verify comparibility of two cycle values
*/
struct system_counterval_t {
u64 cycles;
time: Add driver cross timestamp interface for higher precision time synchronization ACKNOWLEDGMENT: cross timestamp code was developed by Thomas Gleixner <tglx@linutronix.de>. It has changed considerably and any mistakes are mine. The precision with which events on multiple networked systems can be synchronized using, as an example, PTP (IEEE 1588, 802.1AS) is limited by the precision of the cross timestamps between the system clock and the device (timestamp) clock. Precision here is the degree of simultaneity when capturing the cross timestamp. Currently the PTP cross timestamp is captured in software using the PTP device driver ioctl PTP_SYS_OFFSET. Reads of the device clock are interleaved with reads of the realtime clock. At best, the precision of this cross timestamp is on the order of several microseconds due to software latencies. Sub-microsecond precision is required for industrial control and some media applications. To achieve this level of precision hardware supported cross timestamping is needed. The function get_device_system_crosstimestamp() allows device drivers to return a cross timestamp with system time properly scaled to nanoseconds. The realtime value is needed to discipline that clock using PTP and the monotonic raw value is used for applications that don't require a "real" time, but need an unadjusted clock time. The get_device_system_crosstimestamp() code calls back into the driver to ensure that the system counter is within the current timekeeping update interval. Modern Intel hardware provides an Always Running Timer (ART) which is exactly related to TSC through a known frequency ratio. The ART is routed to devices on the system and is used to precisely and simultaneously capture the device clock with the ART. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Reworked to remove extra structures and simplify calling] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 14:15:22 +03:00
struct clocksource *cs;
};
/*
* Get cross timestamp between system clock and device clock
*/
extern int get_device_system_crosststamp(
int (*get_time_fn)(ktime_t *device_time,
struct system_counterval_t *system_counterval,
void *ctx),
void *ctx,
time: Add history to cross timestamp interface supporting slower devices Another representative use case of time sync and the correlated clocksource (in addition to PTP noted above) is PTP synchronized audio. In a streaming application, as an example, samples will be sent and/or received by multiple devices with a presentation time that is in terms of the PTP master clock. Synchronizing the audio output on these devices requires correlating the audio clock with the PTP master clock. The more precise this correlation is, the better the audio quality (i.e. out of sync audio sounds bad). From an application standpoint, to correlate the PTP master clock with the audio device clock, the system clock is used as a intermediate timebase. The transforms such an application would perform are: System Clock <-> Audio clock System Clock <-> Network Device Clock [<-> PTP Master Clock] Modern Intel platforms can perform a more accurate cross timestamp in hardware (ART,audio device clock). The audio driver requires ART->system time transforms -- the same as required for the network driver. These platforms offload audio processing (including cross-timestamps) to a DSP which to ensure uninterrupted audio processing, communicates and response to the host only once every millsecond. As a result is takes up to a millisecond for the DSP to receive a request, the request is processed by the DSP, the audio output hardware is polled for completion, the result is copied into shared memory, and the host is notified. All of these operation occur on a millisecond cadence. This transaction requires about 2 ms, but under heavier workloads it may take up to 4 ms. Adding a history allows these slow devices the option of providing an ART value outside of the current interval. In this case, the callback provided is an accessor function for the previously obtained counter value. If get_system_device_crosststamp() receives a counter value previous to cycle_last, it consults the history provided as an argument in history_ref and interpolates the realtime and monotonic raw system time using the provided counter value. If there are any clock discontinuities, e.g. from calling settimeofday(), the monotonic raw time is interpolated in the usual way, but the realtime clock time is adjusted by scaling the monotonic raw adjustment. When an accessor function is used a history argument *must* be provided. The history is initialized using ktime_get_snapshot() and must be called before the counter values are read. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Fixed up cycles_t/cycle_t type confusion] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 14:15:23 +03:00
struct system_time_snapshot *history,
time: Add driver cross timestamp interface for higher precision time synchronization ACKNOWLEDGMENT: cross timestamp code was developed by Thomas Gleixner <tglx@linutronix.de>. It has changed considerably and any mistakes are mine. The precision with which events on multiple networked systems can be synchronized using, as an example, PTP (IEEE 1588, 802.1AS) is limited by the precision of the cross timestamps between the system clock and the device (timestamp) clock. Precision here is the degree of simultaneity when capturing the cross timestamp. Currently the PTP cross timestamp is captured in software using the PTP device driver ioctl PTP_SYS_OFFSET. Reads of the device clock are interleaved with reads of the realtime clock. At best, the precision of this cross timestamp is on the order of several microseconds due to software latencies. Sub-microsecond precision is required for industrial control and some media applications. To achieve this level of precision hardware supported cross timestamping is needed. The function get_device_system_crosstimestamp() allows device drivers to return a cross timestamp with system time properly scaled to nanoseconds. The realtime value is needed to discipline that clock using PTP and the monotonic raw value is used for applications that don't require a "real" time, but need an unadjusted clock time. The get_device_system_crosstimestamp() code calls back into the driver to ensure that the system counter is within the current timekeeping update interval. Modern Intel hardware provides an Always Running Timer (ART) which is exactly related to TSC through a known frequency ratio. The ART is routed to devices on the system and is used to precisely and simultaneously capture the device clock with the ART. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Reworked to remove extra structures and simplify calling] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 14:15:22 +03:00
struct system_device_crosststamp *xtstamp);
/*
* Simultaneously snapshot realtime and monotonic raw clocks
*/
extern void ktime_get_snapshot(struct system_time_snapshot *systime_snapshot);
/*
* Persistent clock related interfaces
*/
extern int persistent_clock_is_local;
extern void read_persistent_clock(struct timespec *ts);
extern void read_persistent_clock64(struct timespec64 *ts);
extern void read_boot_clock64(struct timespec64 *ts);
extern int update_persistent_clock(struct timespec now);
extern int update_persistent_clock64(struct timespec64 now);
#endif