microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/net/Space.c

407 строки
11 KiB
C
Исходник Обычный вид История

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Holds initial configuration information for devices.
*
* Version: @(#)Space.c 1.0.7 08/12/93
*
[PATCH] update Ross Biro bouncing email address Ross moved. Remove the bad email address so people will find the correct one in ./CREDITS. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-06 03:16:16 +04:00
* Authors: Ross Biro
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Donald J. Becker, <becker@scyld.com>
*
* Changelog:
* Stephen Hemminger (09/2003)
* - get rid of pre-linked dev list, dynamic device allocation
* Paul Gortmaker (03/2002)
* - struct init cleanup, enable multiple ISA autoprobes.
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
* - fix sbni: s/device/net_device/
* Paul Gortmaker (06/98):
* - sort probes in a sane way, make sure all (safe) probes
* get run once & failed autoprobes don't autoprobe again.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/trdevice.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/netlink.h>
#include <linux/divert.h>
/* A unified ethernet device probe. This is the easiest way to have every
ethernet adaptor have the name "eth[0123...]".
*/
extern struct net_device *ne2_probe(int unit);
extern struct net_device *hp100_probe(int unit);
extern struct net_device *ultra_probe(int unit);
extern struct net_device *ultra32_probe(int unit);
extern struct net_device *wd_probe(int unit);
extern struct net_device *el2_probe(int unit);
extern struct net_device *ne_probe(int unit);
extern struct net_device *hp_probe(int unit);
extern struct net_device *hp_plus_probe(int unit);
extern struct net_device *express_probe(int unit);
extern struct net_device *eepro_probe(int unit);
extern struct net_device *at1700_probe(int unit);
extern struct net_device *fmv18x_probe(int unit);
extern struct net_device *eth16i_probe(int unit);
extern struct net_device *i82596_probe(int unit);
extern struct net_device *ewrk3_probe(int unit);
extern struct net_device *el1_probe(int unit);
extern struct net_device *wavelan_probe(int unit);
extern struct net_device *arlan_probe(int unit);
extern struct net_device *el16_probe(int unit);
extern struct net_device *elmc_probe(int unit);
extern struct net_device *skmca_probe(int unit);
extern struct net_device *elplus_probe(int unit);
extern struct net_device *ac3200_probe(int unit);
extern struct net_device *es_probe(int unit);
extern struct net_device *lne390_probe(int unit);
extern struct net_device *e2100_probe(int unit);
extern struct net_device *ni5010_probe(int unit);
extern struct net_device *ni52_probe(int unit);
extern struct net_device *ni65_probe(int unit);
extern struct net_device *sonic_probe(int unit);
extern struct net_device *SK_init(int unit);
extern struct net_device *seeq8005_probe(int unit);
extern struct net_device *smc_init(int unit);
extern struct net_device *atarilance_probe(int unit);
extern struct net_device *sun3lance_probe(int unit);
extern struct net_device *sun3_82586_probe(int unit);
extern struct net_device *apne_probe(int unit);
extern struct net_device *bionet_probe(int unit);
extern struct net_device *pamsnet_probe(int unit);
extern struct net_device *cs89x0_probe(int unit);
extern struct net_device *hplance_probe(int unit);
extern struct net_device *bagetlance_probe(int unit);
extern struct net_device *mvme147lance_probe(int unit);
extern struct net_device *tc515_probe(int unit);
extern struct net_device *lance_probe(int unit);
extern struct net_device *mace_probe(int unit);
extern struct net_device *macsonic_probe(int unit);
extern struct net_device *mac8390_probe(int unit);
extern struct net_device *mac89x0_probe(int unit);
extern struct net_device *mc32_probe(int unit);
extern struct net_device *cops_probe(int unit);
extern struct net_device *ltpc_probe(void);
/* Detachable devices ("pocket adaptors") */
extern struct net_device *de620_probe(int unit);
/* Fibre Channel adapters */
extern int iph5526_probe(struct net_device *dev);
/* SBNI adapters */
extern int sbni_probe(int unit);
struct devprobe2 {
struct net_device *(*probe)(int unit);
int status; /* non-zero if autoprobe has failed */
};
static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
{
struct net_device *dev;
for (; p->probe; p++) {
if (autoprobe && p->status)
continue;
dev = p->probe(unit);
if (!IS_ERR(dev))
return 0;
if (autoprobe)
p->status = PTR_ERR(dev);
}
return -ENODEV;
}
/*
* This is a bit of an artificial separation as there are PCI drivers
* that also probe for EISA cards (in the PCI group) and there are ISA
* drivers that probe for EISA cards (in the ISA group). These are the
* legacy EISA only driver probes, and also the legacy PCI probes
*/
static struct devprobe2 eisa_probes[] __initdata = {
#ifdef CONFIG_ULTRA32
{ultra32_probe, 0},
#endif
#ifdef CONFIG_AC3200
{ac3200_probe, 0},
#endif
#ifdef CONFIG_ES3210
{es_probe, 0},
#endif
#ifdef CONFIG_LNE390
{lne390_probe, 0},
#endif
{NULL, 0},
};
static struct devprobe2 mca_probes[] __initdata = {
#ifdef CONFIG_NE2_MCA
{ne2_probe, 0},
#endif
#ifdef CONFIG_ELMC /* 3c523 */
{elmc_probe, 0},
#endif
#ifdef CONFIG_ELMC_II /* 3c527 */
{mc32_probe, 0},
#endif
#ifdef CONFIG_SKMC /* SKnet Microchannel */
{skmca_probe, 0},
#endif
{NULL, 0},
};
/*
* ISA probes that touch addresses < 0x400 (including those that also
* look for EISA/PCI/MCA cards in addition to ISA cards).
*/
static struct devprobe2 isa_probes[] __initdata = {
#ifdef CONFIG_HP100 /* ISA, EISA & PCI */
{hp100_probe, 0},
#endif
#ifdef CONFIG_3C515
{tc515_probe, 0},
#endif
#ifdef CONFIG_ULTRA
{ultra_probe, 0},
#endif
#ifdef CONFIG_WD80x3
{wd_probe, 0},
#endif
#ifdef CONFIG_EL2 /* 3c503 */
{el2_probe, 0},
#endif
#ifdef CONFIG_HPLAN
{hp_probe, 0},
#endif
#ifdef CONFIG_HPLAN_PLUS
{hp_plus_probe, 0},
#endif
#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
{e2100_probe, 0},
#endif
#if defined(CONFIG_NE2000) || \
defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
{ne_probe, 0},
#endif
#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
{lance_probe, 0},
#endif
#ifdef CONFIG_SMC9194
{smc_init, 0},
#endif
#ifdef CONFIG_SEEQ8005
{seeq8005_probe, 0},
#endif
#ifdef CONFIG_CS89x0
{cs89x0_probe, 0},
#endif
#ifdef CONFIG_AT1700
{at1700_probe, 0},
#endif
#ifdef CONFIG_ETH16I
{eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */
#endif
#ifdef CONFIG_EEXPRESS /* Intel EtherExpress */
{express_probe, 0},
#endif
#ifdef CONFIG_EEXPRESS_PRO /* Intel EtherExpress Pro/10 */
{eepro_probe, 0},
#endif
#ifdef CONFIG_EWRK3 /* DEC EtherWORKS 3 */
{ewrk3_probe, 0},
#endif
#if defined(CONFIG_APRICOT) || defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */
{i82596_probe, 0},
#endif
#ifdef CONFIG_EL1 /* 3c501 */
{el1_probe, 0},
#endif
#ifdef CONFIG_WAVELAN /* WaveLAN */
{wavelan_probe, 0},
#endif
#ifdef CONFIG_ARLAN /* Aironet */
{arlan_probe, 0},
#endif
#ifdef CONFIG_EL16 /* 3c507 */
{el16_probe, 0},
#endif
#ifdef CONFIG_ELPLUS /* 3c505 */
{elplus_probe, 0},
#endif
#ifdef CONFIG_NI5010
{ni5010_probe, 0},
#endif
#ifdef CONFIG_NI52
{ni52_probe, 0},
#endif
#ifdef CONFIG_NI65
{ni65_probe, 0},
#endif
{NULL, 0},
};
static struct devprobe2 parport_probes[] __initdata = {
#ifdef CONFIG_DE620 /* D-Link DE-620 adapter */
{de620_probe, 0},
#endif
{NULL, 0},
};
static struct devprobe2 m68k_probes[] __initdata = {
#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
{atarilance_probe, 0},
#endif
#ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */
{sun3lance_probe, 0},
#endif
#ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */
{sun3_82586_probe, 0},
#endif
#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
{apne_probe, 0},
#endif
#ifdef CONFIG_ATARI_BIONET /* Atari Bionet Ethernet board */
{bionet_probe, 0},
#endif
#ifdef CONFIG_ATARI_PAMSNET /* Atari PAMsNet Ethernet board */
{pamsnet_probe, 0},
#endif
#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
{mvme147lance_probe, 0},
#endif
#ifdef CONFIG_MACMACE /* Mac 68k Quadra AV builtin Ethernet */
{mace_probe, 0},
#endif
#ifdef CONFIG_MACSONIC /* Mac SONIC-based Ethernet of all sorts */
{macsonic_probe, 0},
#endif
#ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */
{mac8390_probe, 0},
#endif
#ifdef CONFIG_MAC89x0
{mac89x0_probe, 0},
#endif
{NULL, 0},
};
/*
* Unified ethernet device probe, segmented per architecture and
* per bus interface. This drives the legacy devices only for now.
*/
static void __init ethif_probe2(int unit)
{
unsigned long base_addr = netdev_boot_base("eth", unit);
if (base_addr == 1)
return;
(void)( probe_list2(unit, m68k_probes, base_addr == 0) &&
probe_list2(unit, eisa_probes, base_addr == 0) &&
probe_list2(unit, mca_probes, base_addr == 0) &&
probe_list2(unit, isa_probes, base_addr == 0) &&
probe_list2(unit, parport_probes, base_addr == 0));
}
#ifdef CONFIG_TR
/* Token-ring device probe */
extern int ibmtr_probe_card(struct net_device *);
extern struct net_device *sk_isa_probe(int unit);
extern struct net_device *proteon_probe(int unit);
extern struct net_device *smctr_probe(int unit);
static struct devprobe2 tr_probes2[] __initdata = {
#ifdef CONFIG_SKISA
{sk_isa_probe, 0},
#endif
#ifdef CONFIG_PROTEON
{proteon_probe, 0},
#endif
#ifdef CONFIG_SMCTR
{smctr_probe, 0},
#endif
{NULL, 0},
};
static __init int trif_probe(int unit)
{
int err = -ENODEV;
#ifdef CONFIG_IBMTR
struct net_device *dev = alloc_trdev(0);
if (!dev)
return -ENOMEM;
sprintf(dev->name, "tr%d", unit);
netdev_boot_setup_check(dev);
err = ibmtr_probe_card(dev);
if (err)
free_netdev(dev);
#endif
return err;
}
static void __init trif_probe2(int unit)
{
unsigned long base_addr = netdev_boot_base("tr", unit);
if (base_addr == 1)
return;
probe_list2(unit, tr_probes2, base_addr == 0);
}
#endif
/*
* The loopback device is global so it can be directly referenced
* by the network code. Also, it must be first on device list.
*/
extern int loopback_init(void);
/* Statically configured drivers -- order matters here. */
static int __init net_olddevs_init(void)
{
int num;
if (loopback_init()) {
printk(KERN_ERR "Network loopback device setup failed\n");
}
#ifdef CONFIG_SBNI
for (num = 0; num < 8; ++num)
sbni_probe(num);
#endif
#ifdef CONFIG_TR
for (num = 0; num < 8; ++num)
if (!trif_probe(num))
trif_probe2(num);
#endif
for (num = 0; num < 8; ++num)
ethif_probe2(num);
#ifdef CONFIG_COPS
cops_probe(0);
cops_probe(1);
cops_probe(2);
#endif
#ifdef CONFIG_LTPC
ltpc_probe();
#endif
return 0;
}
device_initcall(net_olddevs_init);