WSL2-Linux-Kernel/drivers/cpufreq/ppc_cbe_cpufreq.c

174 строки
3.6 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* cpufreq driver for the cell processor
*
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
*
* Author: Christian Krafft <krafft@de.ibm.com>
*/
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <asm/machdep.h>
#include <asm/cell-regs.h>
#include "ppc_cbe_cpufreq.h"
/* the CBE supports an 8 step frequency scaling */
static struct cpufreq_frequency_table cbe_freqs[] = {
{0, 1, 0},
{0, 2, 0},
{0, 3, 0},
{0, 4, 0},
{0, 5, 0},
{0, 6, 0},
{0, 8, 0},
{0, 10, 0},
{0, 0, CPUFREQ_TABLE_END},
};
/*
* hardware specific functions
*/
static int set_pmode(unsigned int cpu, unsigned int slow_mode)
{
int rc;
if (cbe_cpufreq_has_pmi)
rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode);
else
rc = cbe_cpufreq_set_pmode(cpu, slow_mode);
pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu));
return rc;
}
/*
* cpufreq functions
*/
static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *pos;
const u32 *max_freqp;
u32 max_freq;
int cur_pmode;
struct device_node *cpu;
cpu = of_get_cpu_node(policy->cpu, NULL);
if (!cpu)
return -ENODEV;
pr_debug("init cpufreq on CPU %d\n", policy->cpu);
/*
* Let's check we can actually get to the CELL regs
*/
if (!cbe_get_cpu_pmd_regs(policy->cpu) ||
!cbe_get_cpu_mic_tm_regs(policy->cpu)) {
pr_info("invalid CBE regs pointers for cpufreq\n");
of_node_put(cpu);
return -EINVAL;
}
max_freqp = of_get_property(cpu, "clock-frequency", NULL);
of_node_put(cpu);
if (!max_freqp)
return -EINVAL;
/* we need the freq in kHz */
max_freq = *max_freqp / 1000;
pr_debug("max clock-frequency is at %u kHz\n", max_freq);
pr_debug("initializing frequency table\n");
/* initialize frequency table */
cpufreq_for_each_entry(pos, cbe_freqs) {
pos->frequency = max_freq / pos->driver_data;
pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency);
}
/* if DEBUG is enabled set_pmode() measures the latency
* of a transition */
policy->cpuinfo.transition_latency = 25000;
cur_pmode = cbe_cpufreq_get_pmode(policy->cpu);
pr_debug("current pmode is at %d\n",cur_pmode);
policy->cur = cbe_freqs[cur_pmode].frequency;
#ifdef CONFIG_SMP
cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
#endif
policy->freq_table = cbe_freqs;
cbe_cpufreq_pmi_policy_init(policy);
return 0;
}
static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
cbe_cpufreq_pmi_policy_exit(policy);
return 0;
}
static int cbe_cpufreq_target(struct cpufreq_policy *policy,
cpufreq: Implement light weight ->target_index() routine Currently, the prototype of cpufreq_drivers target routines is: int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after that. So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables. This patch implements the new light weight prototype for target_index() routine. It looks like this: int target_index(struct cpufreq_policy *policy, unsigned int index); CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time. This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly. It also converts existing .target() to newly defined light weight .target_index() routine for many driver. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2013-10-25 18:15:48 +04:00
unsigned int cbe_pmode_new)
{
pr_debug("setting frequency for cpu %d to %d kHz, " \
"1/%d of max frequency\n",
policy->cpu,
cbe_freqs[cbe_pmode_new].frequency,
cbe_freqs[cbe_pmode_new].driver_data);
return set_pmode(policy->cpu, cbe_pmode_new);
}
static struct cpufreq_driver cbe_cpufreq_driver = {
.verify = cpufreq_generic_frequency_table_verify,
cpufreq: Implement light weight ->target_index() routine Currently, the prototype of cpufreq_drivers target routines is: int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after that. So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables. This patch implements the new light weight prototype for target_index() routine. It looks like this: int target_index(struct cpufreq_policy *policy, unsigned int index); CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time. This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly. It also converts existing .target() to newly defined light weight .target_index() routine for many driver. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2013-10-25 18:15:48 +04:00
.target_index = cbe_cpufreq_target,
.init = cbe_cpufreq_cpu_init,
.exit = cbe_cpufreq_cpu_exit,
.name = "cbe-cpufreq",
.flags = CPUFREQ_CONST_LOOPS,
};
/*
* module init and destoy
*/
static int __init cbe_cpufreq_init(void)
{
int ret;
if (!machine_is(cell))
return -ENODEV;
cbe_cpufreq_pmi_init();
ret = cpufreq_register_driver(&cbe_cpufreq_driver);
if (ret)
cbe_cpufreq_pmi_exit();
return ret;
}
static void __exit cbe_cpufreq_exit(void)
{
cpufreq_unregister_driver(&cbe_cpufreq_driver);
cbe_cpufreq_pmi_exit();
}
module_init(cbe_cpufreq_init);
module_exit(cbe_cpufreq_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");