WSL2-Linux-Kernel/drivers/usb/usbip/stub_rx.c

589 строки
14 KiB
C
Исходник Обычный вид История

/*
* Copyright (C) 2003-2008 Takahiro Hirofuchi
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
* USA.
*/
#include <asm/byteorder.h>
#include <linux/kthread.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include "usbip_common.h"
#include "stub.h"
static int is_clear_halt_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
req = (struct usb_ctrlrequest *) urb->setup_packet;
return (req->bRequest == USB_REQ_CLEAR_FEATURE) &&
(req->bRequestType == USB_RECIP_ENDPOINT) &&
(req->wValue == USB_ENDPOINT_HALT);
}
static int is_set_interface_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
req = (struct usb_ctrlrequest *) urb->setup_packet;
return (req->bRequest == USB_REQ_SET_INTERFACE) &&
(req->bRequestType == USB_RECIP_INTERFACE);
}
static int is_set_configuration_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
req = (struct usb_ctrlrequest *) urb->setup_packet;
return (req->bRequest == USB_REQ_SET_CONFIGURATION) &&
(req->bRequestType == USB_RECIP_DEVICE);
}
static int is_reset_device_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
__u16 value;
__u16 index;
req = (struct usb_ctrlrequest *) urb->setup_packet;
value = le16_to_cpu(req->wValue);
index = le16_to_cpu(req->wIndex);
if ((req->bRequest == USB_REQ_SET_FEATURE) &&
(req->bRequestType == USB_RT_PORT) &&
(value == USB_PORT_FEAT_RESET)) {
usbip_dbg_stub_rx("reset_device_cmd, port %u\n", index);
return 1;
} else
return 0;
}
static int tweak_clear_halt_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
int target_endp;
int target_dir;
int target_pipe;
int ret;
req = (struct usb_ctrlrequest *) urb->setup_packet;
/*
* The stalled endpoint is specified in the wIndex value. The endpoint
* of the urb is the target of this clear_halt request (i.e., control
* endpoint).
*/
target_endp = le16_to_cpu(req->wIndex) & 0x000f;
/* the stalled endpoint direction is IN or OUT?. USB_DIR_IN is 0x80. */
target_dir = le16_to_cpu(req->wIndex) & 0x0080;
if (target_dir)
target_pipe = usb_rcvctrlpipe(urb->dev, target_endp);
else
target_pipe = usb_sndctrlpipe(urb->dev, target_endp);
ret = usb_clear_halt(urb->dev, target_pipe);
if (ret < 0)
dev_err(&urb->dev->dev,
"usb_clear_halt error: devnum %d endp %d ret %d\n",
urb->dev->devnum, target_endp, ret);
else
dev_info(&urb->dev->dev,
"usb_clear_halt done: devnum %d endp %d\n",
urb->dev->devnum, target_endp);
return ret;
}
static int tweak_set_interface_cmd(struct urb *urb)
{
struct usb_ctrlrequest *req;
__u16 alternate;
__u16 interface;
int ret;
req = (struct usb_ctrlrequest *) urb->setup_packet;
alternate = le16_to_cpu(req->wValue);
interface = le16_to_cpu(req->wIndex);
usbip_dbg_stub_rx("set_interface: inf %u alt %u\n",
interface, alternate);
ret = usb_set_interface(urb->dev, interface, alternate);
if (ret < 0)
dev_err(&urb->dev->dev,
"usb_set_interface error: inf %u alt %u ret %d\n",
interface, alternate, ret);
else
dev_info(&urb->dev->dev,
"usb_set_interface done: inf %u alt %u\n",
interface, alternate);
return ret;
}
static int tweak_set_configuration_cmd(struct urb *urb)
{
struct stub_priv *priv = (struct stub_priv *) urb->context;
struct stub_device *sdev = priv->sdev;
struct usb_ctrlrequest *req;
__u16 config;
int err;
req = (struct usb_ctrlrequest *) urb->setup_packet;
config = le16_to_cpu(req->wValue);
err = usb_set_configuration(sdev->udev, config);
if (err && err != -ENODEV)
dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n",
config, err);
return 0;
}
static int tweak_reset_device_cmd(struct urb *urb)
{
struct stub_priv *priv = (struct stub_priv *) urb->context;
struct stub_device *sdev = priv->sdev;
dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
if (usb_lock_device_for_reset(sdev->udev, NULL) < 0) {
dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
return 0;
}
usb_reset_device(sdev->udev);
usb_unlock_device(sdev->udev);
return 0;
}
/*
* clear_halt, set_interface, and set_configuration require special tricks.
*/
static void tweak_special_requests(struct urb *urb)
{
if (!urb || !urb->setup_packet)
return;
if (usb_pipetype(urb->pipe) != PIPE_CONTROL)
return;
if (is_clear_halt_cmd(urb))
/* tweak clear_halt */
tweak_clear_halt_cmd(urb);
else if (is_set_interface_cmd(urb))
/* tweak set_interface */
tweak_set_interface_cmd(urb);
else if (is_set_configuration_cmd(urb))
/* tweak set_configuration */
tweak_set_configuration_cmd(urb);
else if (is_reset_device_cmd(urb))
tweak_reset_device_cmd(urb);
else
usbip_dbg_stub_rx("no need to tweak\n");
}
/*
* stub_recv_unlink() unlinks the URB by a call to usb_unlink_urb().
* By unlinking the urb asynchronously, stub_rx can continuously
* process coming urbs. Even if the urb is unlinked, its completion
* handler will be called and stub_tx will send a return pdu.
*
* See also comments about unlinking strategy in vhci_hcd.c.
*/
static int stub_recv_cmd_unlink(struct stub_device *sdev,
struct usbip_header *pdu)
{
int ret;
unsigned long flags;
struct stub_priv *priv;
spin_lock_irqsave(&sdev->priv_lock, flags);
list_for_each_entry(priv, &sdev->priv_init, list) {
if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
continue;
dev_info(&priv->urb->dev->dev, "unlink urb %p\n",
priv->urb);
/*
* This matched urb is not completed yet (i.e., be in
* flight in usb hcd hardware/driver). Now we are
* cancelling it. The unlinking flag means that we are
* now not going to return the normal result pdu of a
* submission request, but going to return a result pdu
* of the unlink request.
*/
priv->unlinking = 1;
/*
* In the case that unlinking flag is on, prev->seqnum
* is changed from the seqnum of the cancelling urb to
* the seqnum of the unlink request. This will be used
* to make the result pdu of the unlink request.
*/
priv->seqnum = pdu->base.seqnum;
spin_unlock_irqrestore(&sdev->priv_lock, flags);
/*
* usb_unlink_urb() is now out of spinlocking to avoid
* spinlock recursion since stub_complete() is
* sometimes called in this context but not in the
* interrupt context. If stub_complete() is executed
* before we call usb_unlink_urb(), usb_unlink_urb()
* will return an error value. In this case, stub_tx
* will return the result pdu of this unlink request
* though submission is completed and actual unlinking
* is not executed. OK?
*/
/* In the above case, urb->status is not -ECONNRESET,
* so a driver in a client host will know the failure
* of the unlink request ?
*/
ret = usb_unlink_urb(priv->urb);
if (ret != -EINPROGRESS)
dev_err(&priv->urb->dev->dev,
"failed to unlink a urb %p, ret %d\n",
priv->urb, ret);
return 0;
}
usbip_dbg_stub_rx("seqnum %d is not pending\n",
pdu->u.cmd_unlink.seqnum);
/*
* The urb of the unlink target is not found in priv_init queue. It was
* already completed and its results is/was going to be sent by a
* CMD_RET pdu. In this case, usb_unlink_urb() is not needed. We only
* return the completeness of this unlink request to vhci_hcd.
*/
stub_enqueue_ret_unlink(sdev, pdu->base.seqnum, 0);
spin_unlock_irqrestore(&sdev->priv_lock, flags);
return 0;
}
static int valid_request(struct stub_device *sdev, struct usbip_header *pdu)
{
struct usbip_device *ud = &sdev->ud;
int valid = 0;
if (pdu->base.devid == sdev->devid) {
spin_lock_irq(&ud->lock);
if (ud->status == SDEV_ST_USED) {
/* A request is valid. */
valid = 1;
}
spin_unlock_irq(&ud->lock);
}
return valid;
}
static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
struct usbip_header *pdu)
{
struct stub_priv *priv;
struct usbip_device *ud = &sdev->ud;
unsigned long flags;
spin_lock_irqsave(&sdev->priv_lock, flags);
priv = kmem_cache_zalloc(stub_priv_cache, GFP_ATOMIC);
if (!priv) {
dev_err(&sdev->udev->dev, "alloc stub_priv\n");
spin_unlock_irqrestore(&sdev->priv_lock, flags);
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return NULL;
}
priv->seqnum = pdu->base.seqnum;
priv->sdev = sdev;
/*
* After a stub_priv is linked to a list_head,
* our error handler can free allocated data.
*/
list_add_tail(&priv->list, &sdev->priv_init);
spin_unlock_irqrestore(&sdev->priv_lock, flags);
return priv;
}
static int get_pipe(struct stub_device *sdev, int epnum, int dir)
{
staging: usbip: stub: update refcounts for devices and interfaces The stub driver expects to access the usb interface and usb device structures even if the device has been disconnected in the meantime. This change gets a reference to them in the stub probe function using usb_get_intf()/usb_get_dev() and drops them in the disconnect function. This fixes an oops observed with a Logic Controls Line display (0fa8:a030) which disconnects itself when it is reset: [ 1348.562274] BUG: unable to handle kernel paging request at 5f7433e5 [ 1348.562327] IP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 [ 1348.562374] *pde = 00000000 [ 1348.562397] Oops: 0000 [#1] [ 1348.562418] last sysfs file: /sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/bConfigurationValue [ 1348.562454] Modules linked in: usbip vhci_hcd usbip_common_mod fbcon tileblit font bitblit softcursor serio_raw uvesafb pcspkr via_rng snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd usbhid hid via_rhine soundcore mii igel_flash aufs pata_via [ 1348.562649] [ 1348.562670] Pid: 2855, comm: usbip_eh Not tainted (2.6.32 #23.37-ud-r113) M300C [ 1348.562704] EIP: 0060:[<c0393b02>] EFLAGS: 00010216 CPU: 0 [ 1348.562734] EIP is at usb_lock_device_for_reset+0x22/0xd0 [ 1348.562762] EAX: 5f7433cd EBX: 5f7433cd ECX: de293a5c EDX: dd326a00 [ 1348.562793] ESI: 5f7433cd EDI: 000400f6 EBP: cf43ff48 ESP: cf43ff38 [ 1348.562824] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 1348.562854] Process usbip_eh (pid: 2855, ti=cf43e000 task=d2c7f230 task.ti=cf43e000) [ 1348.562884] Stack: [ 1348.562900] d6ec9960 de2939cc 5f7433cd 5f743431 cf43ff70 df8fd32f de2939cc d2c7f230 [ 1348.562940] <0> cf43ff70 00000282 00000282 de2939cc d2c7f230 d2c7f230 cf43ffa8 df84416d [ 1348.562987] <0> cf43ff88 d2c7f230 de293a24 d2c7f230 00000000 d2c7f230 c014e760 cf43ff94 [ 1348.563042] Call Trace: [ 1348.563073] [<df8fd32f>] ? stub_device_reset+0x3f/0x110 [usbip] [ 1348.563114] [<df84416d>] ? event_handler_loop+0xcd/0xe8 [usbip_common_mod] [ 1348.563156] [<c014e760>] ? autoremove_wake_function+0x0/0x50 [ 1348.563193] [<df843d80>] ? usbip_thread+0x0/0x60 [usbip_common_mod] [ 1348.563230] [<df843dd1>] ? usbip_thread+0x51/0x60 [usbip_common_mod] [ 1348.563265] [<c014e374>] ? kthread+0x74/0x80 [ 1348.563294] [<c014e300>] ? kthread+0x0/0x80 [ 1348.563326] [<c0103c47>] ? kernel_thread_helper+0x7/0x10 [ 1348.563351] Code: 00 e8 73 4d 00 00 5d c3 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 7d fc 0f 1f 44 00 00 8b 3d c0 2e 67 c0 81 c7 fa 00 00 00 89 c3 <8b> 40 18 89 d6 85 c0 75 15 b8 ed ff ff ff 8b 5d f4 8b 75 f8 8b [ 1348.563528] EIP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 SS:ESP 0068:cf43ff38 [ 1348.563570] CR2: 000000005f7433e5 [ 1348.563593] ---[ end trace 9c3f1e3a2e5299d9 ]--- Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Tested-by: Steven Harms <sharms@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-12 16:01:59 +03:00
struct usb_device *udev = sdev->udev;
struct usb_host_endpoint *ep;
struct usb_endpoint_descriptor *epd = NULL;
if (dir == USBIP_DIR_IN)
ep = udev->ep_in[epnum & 0x7f];
else
ep = udev->ep_out[epnum & 0x7f];
if (!ep) {
dev_err(&sdev->udev->dev, "no such endpoint?, %d\n",
epnum);
BUG();
}
epd = &ep->desc;
if (usb_endpoint_xfer_control(epd)) {
if (dir == USBIP_DIR_OUT)
return usb_sndctrlpipe(udev, epnum);
else
return usb_rcvctrlpipe(udev, epnum);
}
if (usb_endpoint_xfer_bulk(epd)) {
if (dir == USBIP_DIR_OUT)
return usb_sndbulkpipe(udev, epnum);
else
return usb_rcvbulkpipe(udev, epnum);
}
if (usb_endpoint_xfer_int(epd)) {
if (dir == USBIP_DIR_OUT)
return usb_sndintpipe(udev, epnum);
else
return usb_rcvintpipe(udev, epnum);
}
if (usb_endpoint_xfer_isoc(epd)) {
if (dir == USBIP_DIR_OUT)
return usb_sndisocpipe(udev, epnum);
else
return usb_rcvisocpipe(udev, epnum);
}
/* NOT REACHED */
dev_err(&sdev->udev->dev, "get pipe, epnum %d\n", epnum);
return 0;
}
static void masking_bogus_flags(struct urb *urb)
{
int xfertype;
struct usb_device *dev;
struct usb_host_endpoint *ep;
int is_out;
unsigned int allowed;
if (!urb || urb->hcpriv || !urb->complete)
return;
dev = urb->dev;
if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
return;
ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
[usb_pipeendpoint(urb->pipe)];
if (!ep)
return;
xfertype = usb_endpoint_type(&ep->desc);
if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
struct usb_ctrlrequest *setup =
(struct usb_ctrlrequest *) urb->setup_packet;
if (!setup)
return;
is_out = !(setup->bRequestType & USB_DIR_IN) ||
!setup->wLength;
} else {
is_out = usb_endpoint_dir_out(&ep->desc);
}
/* enforce simple/standard policy */
allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT |
URB_DIR_MASK | URB_FREE_BUFFER);
switch (xfertype) {
case USB_ENDPOINT_XFER_BULK:
if (is_out)
allowed |= URB_ZERO_PACKET;
/* FALLTHROUGH */
case USB_ENDPOINT_XFER_CONTROL:
allowed |= URB_NO_FSBR; /* only affects UHCI */
/* FALLTHROUGH */
default: /* all non-iso endpoints */
if (!is_out)
allowed |= URB_SHORT_NOT_OK;
break;
case USB_ENDPOINT_XFER_ISOC:
allowed |= URB_ISO_ASAP;
break;
}
urb->transfer_flags &= allowed;
}
static void stub_recv_cmd_submit(struct stub_device *sdev,
struct usbip_header *pdu)
{
int ret;
struct stub_priv *priv;
struct usbip_device *ud = &sdev->ud;
staging: usbip: stub: update refcounts for devices and interfaces The stub driver expects to access the usb interface and usb device structures even if the device has been disconnected in the meantime. This change gets a reference to them in the stub probe function using usb_get_intf()/usb_get_dev() and drops them in the disconnect function. This fixes an oops observed with a Logic Controls Line display (0fa8:a030) which disconnects itself when it is reset: [ 1348.562274] BUG: unable to handle kernel paging request at 5f7433e5 [ 1348.562327] IP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 [ 1348.562374] *pde = 00000000 [ 1348.562397] Oops: 0000 [#1] [ 1348.562418] last sysfs file: /sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/bConfigurationValue [ 1348.562454] Modules linked in: usbip vhci_hcd usbip_common_mod fbcon tileblit font bitblit softcursor serio_raw uvesafb pcspkr via_rng snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd usbhid hid via_rhine soundcore mii igel_flash aufs pata_via [ 1348.562649] [ 1348.562670] Pid: 2855, comm: usbip_eh Not tainted (2.6.32 #23.37-ud-r113) M300C [ 1348.562704] EIP: 0060:[<c0393b02>] EFLAGS: 00010216 CPU: 0 [ 1348.562734] EIP is at usb_lock_device_for_reset+0x22/0xd0 [ 1348.562762] EAX: 5f7433cd EBX: 5f7433cd ECX: de293a5c EDX: dd326a00 [ 1348.562793] ESI: 5f7433cd EDI: 000400f6 EBP: cf43ff48 ESP: cf43ff38 [ 1348.562824] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 1348.562854] Process usbip_eh (pid: 2855, ti=cf43e000 task=d2c7f230 task.ti=cf43e000) [ 1348.562884] Stack: [ 1348.562900] d6ec9960 de2939cc 5f7433cd 5f743431 cf43ff70 df8fd32f de2939cc d2c7f230 [ 1348.562940] <0> cf43ff70 00000282 00000282 de2939cc d2c7f230 d2c7f230 cf43ffa8 df84416d [ 1348.562987] <0> cf43ff88 d2c7f230 de293a24 d2c7f230 00000000 d2c7f230 c014e760 cf43ff94 [ 1348.563042] Call Trace: [ 1348.563073] [<df8fd32f>] ? stub_device_reset+0x3f/0x110 [usbip] [ 1348.563114] [<df84416d>] ? event_handler_loop+0xcd/0xe8 [usbip_common_mod] [ 1348.563156] [<c014e760>] ? autoremove_wake_function+0x0/0x50 [ 1348.563193] [<df843d80>] ? usbip_thread+0x0/0x60 [usbip_common_mod] [ 1348.563230] [<df843dd1>] ? usbip_thread+0x51/0x60 [usbip_common_mod] [ 1348.563265] [<c014e374>] ? kthread+0x74/0x80 [ 1348.563294] [<c014e300>] ? kthread+0x0/0x80 [ 1348.563326] [<c0103c47>] ? kernel_thread_helper+0x7/0x10 [ 1348.563351] Code: 00 e8 73 4d 00 00 5d c3 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 7d fc 0f 1f 44 00 00 8b 3d c0 2e 67 c0 81 c7 fa 00 00 00 89 c3 <8b> 40 18 89 d6 85 c0 75 15 b8 ed ff ff ff 8b 5d f4 8b 75 f8 8b [ 1348.563528] EIP: [<c0393b02>] usb_lock_device_for_reset+0x22/0xd0 SS:ESP 0068:cf43ff38 [ 1348.563570] CR2: 000000005f7433e5 [ 1348.563593] ---[ end trace 9c3f1e3a2e5299d9 ]--- Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Tested-by: Steven Harms <sharms@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-12 16:01:59 +03:00
struct usb_device *udev = sdev->udev;
int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction);
priv = stub_priv_alloc(sdev, pdu);
if (!priv)
return;
/* setup a urb */
if (usb_pipeisoc(pipe))
priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
GFP_KERNEL);
else
priv->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!priv->urb) {
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return;
}
/* allocate urb transfer buffer, if needed */
if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
priv->urb->transfer_buffer =
kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
GFP_KERNEL);
if (!priv->urb->transfer_buffer) {
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return;
}
}
/* copy urb setup packet */
priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
GFP_KERNEL);
if (!priv->urb->setup_packet) {
dev_err(&udev->dev, "allocate setup_packet\n");
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return;
}
/* set other members from the base header of pdu */
priv->urb->context = (void *) priv;
priv->urb->dev = udev;
priv->urb->pipe = pipe;
priv->urb->complete = stub_complete;
usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);
if (usbip_recv_xbuff(ud, priv->urb) < 0)
return;
if (usbip_recv_iso(ud, priv->urb) < 0)
return;
/* no need to submit an intercepted request, but harmless? */
tweak_special_requests(priv->urb);
masking_bogus_flags(priv->urb);
/* urb is now ready to submit */
ret = usb_submit_urb(priv->urb, GFP_KERNEL);
if (ret == 0)
usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
pdu->base.seqnum);
else {
dev_err(&udev->dev, "submit_urb error, %d\n", ret);
usbip_dump_header(pdu);
usbip_dump_urb(priv->urb);
/*
* Pessimistic.
* This connection will be discarded.
*/
usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
}
usbip_dbg_stub_rx("Leave\n");
}
/* recv a pdu */
static void stub_rx_pdu(struct usbip_device *ud)
{
int ret;
struct usbip_header pdu;
struct stub_device *sdev = container_of(ud, struct stub_device, ud);
struct device *dev = &sdev->udev->dev;
usbip_dbg_stub_rx("Enter\n");
memset(&pdu, 0, sizeof(pdu));
/* receive a pdu header */
ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu));
if (ret != sizeof(pdu)) {
dev_err(dev, "recv a header, %d\n", ret);
usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
return;
}
usbip_header_correct_endian(&pdu, 0);
if (usbip_dbg_flag_stub_rx)
usbip_dump_header(&pdu);
if (!valid_request(sdev, &pdu)) {
dev_err(dev, "recv invalid request\n");
usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
return;
}
switch (pdu.base.command) {
case USBIP_CMD_UNLINK:
stub_recv_cmd_unlink(sdev, &pdu);
break;
case USBIP_CMD_SUBMIT:
stub_recv_cmd_submit(sdev, &pdu);
break;
default:
/* NOTREACHED */
dev_err(dev, "unknown pdu\n");
usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
break;
}
}
int stub_rx_loop(void *data)
{
struct usbip_device *ud = data;
while (!kthread_should_stop()) {
if (usbip_event_happened(ud))
break;
stub_rx_pdu(ud);
}
return 0;
}