microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/clk/zte/clk-zx296718.c

1089 строки
34 KiB
C
Исходник Обычный вид История

clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
/*
* Copyright (C) 2015 - 2016 ZTE Corporation.
* Copyright (C) 2016 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <dt-bindings/clock/zx296718-clock.h>
#include "clk.h"
/* TOP CRM */
#define TOP_CLK_MUX0 0x04
#define TOP_CLK_MUX1 0x08
#define TOP_CLK_MUX2 0x0c
#define TOP_CLK_MUX3 0x10
#define TOP_CLK_MUX4 0x14
#define TOP_CLK_MUX5 0x18
#define TOP_CLK_MUX6 0x1c
#define TOP_CLK_MUX7 0x20
#define TOP_CLK_MUX9 0x28
#define TOP_CLK_GATE0 0x34
#define TOP_CLK_GATE1 0x38
#define TOP_CLK_GATE2 0x3c
#define TOP_CLK_GATE3 0x40
#define TOP_CLK_GATE4 0x44
#define TOP_CLK_GATE5 0x48
#define TOP_CLK_GATE6 0x4c
#define TOP_CLK_DIV0 0x58
#define PLL_CPU_REG 0x80
#define PLL_VGA_REG 0xb0
#define PLL_DDR_REG 0xa0
/* LSP0 CRM */
#define LSP0_TIMER3_CLK 0x4
#define LSP0_TIMER4_CLK 0x8
#define LSP0_TIMER5_CLK 0xc
#define LSP0_UART3_CLK 0x10
#define LSP0_UART1_CLK 0x14
#define LSP0_UART2_CLK 0x18
#define LSP0_SPIFC0_CLK 0x1c
#define LSP0_I2C4_CLK 0x20
#define LSP0_I2C5_CLK 0x24
#define LSP0_SSP0_CLK 0x28
#define LSP0_SSP1_CLK 0x2c
#define LSP0_USIM0_CLK 0x30
#define LSP0_GPIO_CLK 0x34
#define LSP0_I2C3_CLK 0x38
/* LSP1 CRM */
#define LSP1_UART4_CLK 0x08
#define LSP1_UART5_CLK 0x0c
#define LSP1_PWM_CLK 0x10
#define LSP1_I2C2_CLK 0x14
#define LSP1_SSP2_CLK 0x1c
#define LSP1_SSP3_CLK 0x20
#define LSP1_SSP4_CLK 0x24
#define LSP1_USIM1_CLK 0x28
/* audio lsp */
#define AUDIO_I2S0_DIV_CFG1 0x10
#define AUDIO_I2S0_DIV_CFG2 0x14
#define AUDIO_I2S0_CLK 0x18
#define AUDIO_I2S1_DIV_CFG1 0x20
#define AUDIO_I2S1_DIV_CFG2 0x24
#define AUDIO_I2S1_CLK 0x28
#define AUDIO_I2S2_DIV_CFG1 0x30
#define AUDIO_I2S2_DIV_CFG2 0x34
#define AUDIO_I2S2_CLK 0x38
#define AUDIO_I2S3_DIV_CFG1 0x40
#define AUDIO_I2S3_DIV_CFG2 0x44
#define AUDIO_I2S3_CLK 0x48
#define AUDIO_I2C0_CLK 0x50
#define AUDIO_SPDIF0_DIV_CFG1 0x60
#define AUDIO_SPDIF0_DIV_CFG2 0x64
#define AUDIO_SPDIF0_CLK 0x68
#define AUDIO_SPDIF1_DIV_CFG1 0x70
#define AUDIO_SPDIF1_DIV_CFG2 0x74
#define AUDIO_SPDIF1_CLK 0x78
#define AUDIO_TIMER_CLK 0x80
#define AUDIO_TDM_CLK 0x90
#define AUDIO_TS_CLK 0xa0
static DEFINE_SPINLOCK(clk_lock);
clk: zte: Mark pll config tables as const These should be const. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-04-07 22:21:33 +03:00
static const struct zx_pll_config pll_cpu_table[] = {
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
PLL_RATE(1312000000, 0x00103621, 0x04aaaaaa),
PLL_RATE(1407000000, 0x00103a21, 0x04aaaaaa),
PLL_RATE(1503000000, 0x00103e21, 0x04aaaaaa),
PLL_RATE(1600000000, 0x00104221, 0x04aaaaaa),
};
clk: zte: Mark pll config tables as const These should be const. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-04-07 22:21:33 +03:00
static const struct zx_pll_config pll_vga_table[] = {
clk: zte: add pll_vga clock for zx296718 It adds zx296718 pll_vga clock for VGA support, so that VGA device can get required pixel rate from clock driver for different display mode. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-03-21 11:38:23 +03:00
PLL_RATE(36000000, 0x00102464, 0x04000000), /* 800x600@56 */
PLL_RATE(40000000, 0x00102864, 0x04000000), /* 800x600@60 */
PLL_RATE(49500000, 0x00103164, 0x04800000), /* 800x600@75 */
PLL_RATE(50000000, 0x00103264, 0x04000000), /* 800x600@72 */
PLL_RATE(56250000, 0x00103864, 0x04400000), /* 800x600@85 */
PLL_RATE(65000000, 0x00104164, 0x04000000), /* 1024x768@60 */
PLL_RATE(74375000, 0x00104a64, 0x04600000), /* 1280x720@60 */
PLL_RATE(75000000, 0x00104b64, 0x04800000), /* 1024x768@70 */
PLL_RATE(78750000, 0x00104e64, 0x04c00000), /* 1024x768@75 */
PLL_RATE(85500000, 0x00105564, 0x04800000), /* 1360x768@60 */
PLL_RATE(106500000, 0x00106a64, 0x04800000), /* 1440x900@60 */
PLL_RATE(108000000, 0x00106c64, 0x04000000), /* 1280x1024@60 */
PLL_RATE(110000000, 0x00106e64, 0x04000000), /* 1024x768@85 */
PLL_RATE(135000000, 0x00105a44, 0x04000000), /* 1280x1024@75 */
PLL_RATE(136750000, 0x00104462, 0x04600000), /* 1440x900@75 */
PLL_RATE(148500000, 0x00104a62, 0x04400000), /* 1920x1080@60 */
PLL_RATE(157000000, 0x00104e62, 0x04800000), /* 1440x900@85 */
PLL_RATE(157500000, 0x00104e62, 0x04c00000), /* 1280x1024@85 */
PLL_RATE(162000000, 0x00105162, 0x04000000), /* 1600x1200@60 */
PLL_RATE(193250000, 0x00106062, 0x04a00000), /* 1920x1200@60 */
};
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
PNAME(osc) = {
"osc24m",
"osc32k",
};
PNAME(dbg_wclk_p) = {
"clk334m",
"clk466m",
"clk396m",
"clk250m",
};
PNAME(a72_coreclk_p) = {
"osc24m",
"pll_mm0_1188m",
"pll_mm1_1296m",
"clk1000m",
"clk648m",
"clk1600m",
"pll_audio_1800m",
"pll_vga_1800m",
};
PNAME(cpu_periclk_p) = {
"osc24m",
"clk500m",
"clk594m",
"clk466m",
"clk294m",
"clk334m",
"clk250m",
"clk125m",
};
PNAME(a53_coreclk_p) = {
"osc24m",
"clk1000m",
"pll_mm0_1188m",
"clk648m",
"clk500m",
"clk800m",
"clk1600m",
"pll_audio_1800m",
};
PNAME(sec_wclk_p) = {
"osc24m",
"clk396m",
"clk334m",
"clk297m",
"clk250m",
"clk198m",
"clk148m5",
"clk99m",
};
PNAME(sd_nand_wclk_p) = {
"osc24m",
"clk49m5",
"clk99m",
"clk198m",
"clk167m",
"clk148m5",
"clk125m",
"clk216m",
};
PNAME(emmc_wclk_p) = {
"osc24m",
"clk198m",
"clk99m",
"clk396m",
"clk334m",
"clk297m",
"clk250m",
"clk148m5",
};
PNAME(clk32_p) = {
"osc32k",
"clk32k768",
};
PNAME(usb_ref24m_p) = {
"osc32k",
"clk32k768",
};
PNAME(sys_noc_alck_p) = {
"osc24m",
"clk250m",
"clk198m",
"clk148m5",
"clk108m",
"clk54m",
"clk216m",
"clk240m",
};
PNAME(vde_aclk_p) = {
"clk334m",
"clk594m",
"clk500m",
"clk432m",
"clk480m",
"clk297m",
"clk_vga", /*600MHz*/
"clk294m",
};
PNAME(vce_aclk_p) = {
"clk334m",
"clk594m",
"clk500m",
"clk432m",
"clk396m",
"clk297m",
"clk_vga", /*600MHz*/
"clk294m",
};
PNAME(hde_aclk_p) = {
"clk334m",
"clk594m",
"clk500m",
"clk432m",
"clk396m",
"clk297m",
"clk_vga", /*600MHz*/
"clk294m",
};
PNAME(gpu_aclk_p) = {
"clk334m",
"clk648m",
"clk594m",
"clk500m",
"clk396m",
"clk297m",
"clk_vga", /*600MHz*/
"clk294m",
};
PNAME(sappu_aclk_p) = {
"clk396m",
"clk500m",
"clk250m",
"clk148m5",
};
PNAME(sappu_wclk_p) = {
"clk198m",
"clk396m",
"clk334m",
"clk297m",
"clk250m",
"clk148m5",
"clk125m",
"clk99m",
};
PNAME(vou_aclk_p) = {
"clk334m",
"clk594m",
"clk500m",
"clk432m",
"clk396m",
"clk297m",
"clk_vga", /*600MHz*/
"clk294m",
};
PNAME(vou_main_wclk_p) = {
"clk108m",
"clk594m",
"clk297m",
"clk148m5",
"clk74m25",
"clk54m",
"clk27m",
"clk_vga",
};
PNAME(vou_aux_wclk_p) = {
"clk108m",
"clk148m5",
"clk74m25",
"clk54m",
"clk27m",
"clk_vga",
"clk54m_mm0",
"clk"
};
PNAME(vou_ppu_wclk_p) = {
"clk334m",
"clk432m",
"clk396m",
"clk297m",
"clk250m",
"clk125m",
"clk198m",
"clk99m",
};
PNAME(vga_i2c_wclk_p) = {
"osc24m",
"clk99m",
};
PNAME(viu_m0_aclk_p) = {
"clk334m",
"clk432m",
"clk396m",
"clk297m",
"clk250m",
"clk125m",
"clk198m",
"osc24m",
};
PNAME(viu_m1_aclk_p) = {
"clk198m",
"clk250m",
"clk297m",
"clk125m",
"clk396m",
"clk334m",
"clk148m5",
"osc24m",
};
PNAME(viu_clk_p) = {
"clk198m",
"clk334m",
"clk297m",
"clk250m",
"clk396m",
"clk125m",
"clk99m",
"clk148m5",
};
PNAME(viu_jpeg_clk_p) = {
"clk334m",
"clk480m",
"clk432m",
"clk396m",
"clk297m",
"clk250m",
"clk125m",
"clk198m",
};
PNAME(ts_sys_clk_p) = {
"clk192m",
"clk167m",
"clk125m",
"clk99m",
};
PNAME(wdt_ares_p) = {
"osc24m",
"clk32k"
};
static struct clk_zx_pll zx296718_pll_clk[] = {
ZX296718_PLL("pll_cpu", "osc24m", PLL_CPU_REG, pll_cpu_table),
clk: zte: add pll_vga clock for zx296718 It adds zx296718 pll_vga clock for VGA support, so that VGA device can get required pixel rate from clock driver for different display mode. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-03-21 11:38:23 +03:00
ZX296718_PLL("pll_vga", "osc24m", PLL_VGA_REG, pll_vga_table),
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
};
static struct zx_clk_fixed_factor top_ffactor_clk[] = {
FFACTOR(0, "clk4m", "osc24m", 1, 6, 0),
FFACTOR(0, "clk2m", "osc24m", 1, 12, 0),
/* pll cpu */
FFACTOR(0, "clk1600m", "pll_cpu", 1, 1, CLK_SET_RATE_PARENT),
FFACTOR(0, "clk800m", "pll_cpu", 1, 2, CLK_SET_RATE_PARENT),
/* pll mac */
FFACTOR(0, "clk25m", "pll_mac", 1, 40, 0),
FFACTOR(0, "clk125m", "pll_mac", 1, 8, 0),
FFACTOR(0, "clk250m", "pll_mac", 1, 4, 0),
FFACTOR(0, "clk50m", "pll_mac", 1, 20, 0),
FFACTOR(0, "clk500m", "pll_mac", 1, 2, 0),
FFACTOR(0, "clk1000m", "pll_mac", 1, 1, 0),
FFACTOR(0, "clk334m", "pll_mac", 1, 3, 0),
FFACTOR(0, "clk167m", "pll_mac", 1, 6, 0),
/* pll mm */
FFACTOR(0, "clk54m_mm0", "pll_mm0", 1, 22, 0),
FFACTOR(0, "clk74m25", "pll_mm0", 1, 16, 0),
FFACTOR(0, "clk148m5", "pll_mm0", 1, 8, 0),
FFACTOR(0, "clk297m", "pll_mm0", 1, 4, 0),
FFACTOR(0, "clk594m", "pll_mm0", 1, 2, 0),
FFACTOR(0, "pll_mm0_1188m", "pll_mm0", 1, 1, 0),
FFACTOR(0, "clk396m", "pll_mm0", 1, 3, 0),
FFACTOR(0, "clk198m", "pll_mm0", 1, 6, 0),
FFACTOR(0, "clk99m", "pll_mm0", 1, 12, 0),
FFACTOR(0, "clk49m5", "pll_mm0", 1, 24, 0),
/* pll mm */
FFACTOR(0, "clk324m", "pll_mm1", 1, 4, 0),
FFACTOR(0, "clk648m", "pll_mm1", 1, 2, 0),
FFACTOR(0, "pll_mm1_1296m", "pll_mm1", 1, 1, 0),
FFACTOR(0, "clk216m", "pll_mm1", 1, 6, 0),
FFACTOR(0, "clk432m", "pll_mm1", 1, 3, 0),
FFACTOR(0, "clk108m", "pll_mm1", 1, 12, 0),
FFACTOR(0, "clk72m", "pll_mm1", 1, 18, 0),
FFACTOR(0, "clk27m", "pll_mm1", 1, 48, 0),
FFACTOR(0, "clk54m", "pll_mm1", 1, 24, 0),
/* vga */
FFACTOR(0, "pll_vga_1800m", "pll_vga", 1, 1, 0),
clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks To support VOU VGA display driver with different modes, we need to set flag for a few clocks, so that clk_set_rate() call in VOU driver can get VGA device desired pixel rate. While at it, the divider between pll_vga and clk_vga gets corrected, as it's 1:1 instead of 1:2. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-03-21 11:38:21 +03:00
FFACTOR(0, "clk_vga", "pll_vga", 1, 1, CLK_SET_RATE_PARENT),
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
/* pll ddr */
FFACTOR(0, "clk466m", "pll_ddr", 1, 2, 0),
/* pll audio */
FFACTOR(0, "pll_audio_1800m", "pll_audio", 1, 1, 0),
FFACTOR(0, "clk32k768", "pll_audio", 1, 27000, 0),
FFACTOR(0, "clk16m384", "pll_audio", 1, 54, 0),
FFACTOR(0, "clk294m", "pll_audio", 1, 3, 0),
/* pll hsic*/
FFACTOR(0, "clk240m", "pll_hsic", 1, 4, 0),
FFACTOR(0, "clk480m", "pll_hsic", 1, 2, 0),
FFACTOR(0, "clk192m", "pll_hsic", 1, 5, 0),
FFACTOR(0, "clk_pll_24m", "pll_hsic", 1, 40, 0),
FFACTOR(0, "emmc_mux_div2", "emmc_mux", 1, 2, CLK_SET_RATE_PARENT),
};
clk: zte: constify clk_div_table clk_div_table are not supposed to change at runtime. All functions working with clk_div_table provided by <linux/clk-provider.h> work with const clk_div_table. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-28 08:28:53 +03:00
static const struct clk_div_table noc_div_table[] = {
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
{ .val = 1, .div = 2, },
{ .val = 3, .div = 4, },
};
static struct zx_clk_div top_div_clk[] = {
DIV_T(0, "sys_noc_hclk", "sys_noc_aclk", TOP_CLK_DIV0, 0, 2, 0, noc_div_table),
DIV_T(0, "sys_noc_pclk", "sys_noc_aclk", TOP_CLK_DIV0, 4, 2, 0, noc_div_table),
};
static struct zx_clk_mux top_mux_clk[] = {
MUX(0, "dbg_mux", dbg_wclk_p, TOP_CLK_MUX0, 12, 2),
MUX(0, "a72_mux", a72_coreclk_p, TOP_CLK_MUX0, 8, 3),
MUX(0, "cpu_peri_mux", cpu_periclk_p, TOP_CLK_MUX0, 4, 3),
MUX_F(0, "a53_mux", a53_coreclk_p, TOP_CLK_MUX0, 0, 3, CLK_SET_RATE_PARENT, 0),
MUX(0, "sys_noc_aclk", sys_noc_alck_p, TOP_CLK_MUX1, 0, 3),
MUX(0, "sec_mux", sec_wclk_p, TOP_CLK_MUX2, 16, 3),
MUX(0, "sd1_mux", sd_nand_wclk_p, TOP_CLK_MUX2, 12, 3),
MUX(0, "sd0_mux", sd_nand_wclk_p, TOP_CLK_MUX2, 8, 3),
MUX(0, "emmc_mux", emmc_wclk_p, TOP_CLK_MUX2, 4, 3),
MUX(0, "nand_mux", sd_nand_wclk_p, TOP_CLK_MUX2, 0, 3),
MUX(0, "usb_ref24m_mux", usb_ref24m_p, TOP_CLK_MUX9, 16, 1),
MUX(0, "clk32k", clk32_p, TOP_CLK_MUX9, 12, 1),
MUX_F(0, "wdt_mux", wdt_ares_p, TOP_CLK_MUX9, 8, 1, CLK_SET_RATE_PARENT, 0),
MUX(0, "timer_mux", osc, TOP_CLK_MUX9, 4, 1),
MUX(0, "vde_mux", vde_aclk_p, TOP_CLK_MUX4, 0, 3),
MUX(0, "vce_mux", vce_aclk_p, TOP_CLK_MUX4, 4, 3),
MUX(0, "hde_mux", hde_aclk_p, TOP_CLK_MUX4, 8, 3),
MUX(0, "gpu_mux", gpu_aclk_p, TOP_CLK_MUX5, 0, 3),
MUX(0, "sappu_a_mux", sappu_aclk_p, TOP_CLK_MUX5, 4, 2),
MUX(0, "sappu_w_mux", sappu_wclk_p, TOP_CLK_MUX5, 8, 3),
MUX(0, "vou_a_mux", vou_aclk_p, TOP_CLK_MUX7, 0, 3),
clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks To support VOU VGA display driver with different modes, we need to set flag for a few clocks, so that clk_set_rate() call in VOU driver can get VGA device desired pixel rate. While at it, the divider between pll_vga and clk_vga gets corrected, as it's 1:1 instead of 1:2. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2017-03-21 11:38:21 +03:00
MUX_F(0, "vou_main_w_mux", vou_main_wclk_p, TOP_CLK_MUX7, 4, 3, CLK_SET_RATE_PARENT, 0),
MUX_F(0, "vou_aux_w_mux", vou_aux_wclk_p, TOP_CLK_MUX7, 8, 3, CLK_SET_RATE_PARENT, 0),
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
MUX(0, "vou_ppu_w_mux", vou_ppu_wclk_p, TOP_CLK_MUX7, 12, 3),
MUX(0, "vga_i2c_mux", vga_i2c_wclk_p, TOP_CLK_MUX7, 16, 1),
MUX(0, "viu_m0_a_mux", viu_m0_aclk_p, TOP_CLK_MUX6, 0, 3),
MUX(0, "viu_m1_a_mux", viu_m1_aclk_p, TOP_CLK_MUX6, 4, 3),
MUX(0, "viu_w_mux", viu_clk_p, TOP_CLK_MUX6, 8, 3),
MUX(0, "viu_jpeg_w_mux", viu_jpeg_clk_p, TOP_CLK_MUX6, 12, 3),
MUX(0, "ts_sys_mux", ts_sys_clk_p, TOP_CLK_MUX6, 16, 2),
};
static struct zx_clk_gate top_gate_clk[] = {
GATE(CPU_DBG_GATE, "dbg_wclk", "dbg_mux", TOP_CLK_GATE0, 4, CLK_SET_RATE_PARENT, 0),
GATE(A72_GATE, "a72_coreclk", "a72_mux", TOP_CLK_GATE0, 3, CLK_SET_RATE_PARENT, 0),
GATE(CPU_PERI_GATE, "cpu_peri", "cpu_peri_mux", TOP_CLK_GATE0, 1, CLK_SET_RATE_PARENT, 0),
GATE(A53_GATE, "a53_coreclk", "a53_mux", TOP_CLK_GATE0, 0, CLK_SET_RATE_PARENT, 0),
GATE(SD1_WCLK, "sd1_wclk", "sd1_mux", TOP_CLK_GATE1, 13, CLK_SET_RATE_PARENT, 0),
GATE(SD0_WCLK, "sd0_wclk", "sd0_mux", TOP_CLK_GATE1, 9, CLK_SET_RATE_PARENT, 0),
GATE(EMMC_WCLK, "emmc_wclk", "emmc_mux_div2", TOP_CLK_GATE0, 5, CLK_SET_RATE_PARENT, 0),
GATE(EMMC_NAND_AXI, "emmc_nand_aclk", "sys_noc_aclk", TOP_CLK_GATE1, 4, CLK_SET_RATE_PARENT, 0),
GATE(NAND_WCLK, "nand_wclk", "nand_mux", TOP_CLK_GATE0, 1, CLK_SET_RATE_PARENT, 0),
GATE(EMMC_NAND_AHB, "emmc_nand_hclk", "sys_noc_hclk", TOP_CLK_GATE1, 0, CLK_SET_RATE_PARENT, 0),
GATE(0, "lsp1_pclk", "sys_noc_pclk", TOP_CLK_GATE2, 31, 0, 0),
GATE(LSP1_148M5, "lsp1_148m5", "clk148m5", TOP_CLK_GATE2, 30, 0, 0),
GATE(LSP1_99M, "lsp1_99m", "clk99m", TOP_CLK_GATE2, 29, 0, 0),
GATE(LSP1_24M, "lsp1_24m", "osc24m", TOP_CLK_GATE2, 28, 0, 0),
GATE(LSP0_74M25, "lsp0_74m25", "clk74m25", TOP_CLK_GATE2, 25, 0, 0),
GATE(0, "lsp0_pclk", "sys_noc_pclk", TOP_CLK_GATE2, 24, 0, 0),
GATE(LSP0_32K, "lsp0_32k", "osc32k", TOP_CLK_GATE2, 23, 0, 0),
GATE(LSP0_148M5, "lsp0_148m5", "clk148m5", TOP_CLK_GATE2, 22, 0, 0),
GATE(LSP0_99M, "lsp0_99m", "clk99m", TOP_CLK_GATE2, 21, 0, 0),
GATE(LSP0_24M, "lsp0_24m", "osc24m", TOP_CLK_GATE2, 20, 0, 0),
GATE(AUDIO_99M, "audio_99m", "clk99m", TOP_CLK_GATE5, 27, 0, 0),
GATE(AUDIO_24M, "audio_24m", "osc24m", TOP_CLK_GATE5, 28, 0, 0),
GATE(AUDIO_16M384, "audio_16m384", "clk16m384", TOP_CLK_GATE5, 29, 0, 0),
GATE(AUDIO_32K, "audio_32k", "clk32k", TOP_CLK_GATE5, 30, 0, 0),
GATE(WDT_WCLK, "wdt_wclk", "wdt_mux", TOP_CLK_GATE6, 9, CLK_SET_RATE_PARENT, 0),
GATE(TIMER_WCLK, "timer_wclk", "timer_mux", TOP_CLK_GATE6, 5, CLK_SET_RATE_PARENT, 0),
GATE(VDE_ACLK, "vde_aclk", "vde_mux", TOP_CLK_GATE3, 0, CLK_SET_RATE_PARENT, 0),
GATE(VCE_ACLK, "vce_aclk", "vce_mux", TOP_CLK_GATE3, 4, CLK_SET_RATE_PARENT, 0),
GATE(HDE_ACLK, "hde_aclk", "hde_mux", TOP_CLK_GATE3, 8, CLK_SET_RATE_PARENT, 0),
GATE(GPU_ACLK, "gpu_aclk", "gpu_mux", TOP_CLK_GATE3, 16, CLK_SET_RATE_PARENT, 0),
GATE(SAPPU_ACLK, "sappu_aclk", "sappu_a_mux", TOP_CLK_GATE3, 20, CLK_SET_RATE_PARENT, 0),
GATE(SAPPU_WCLK, "sappu_wclk", "sappu_w_mux", TOP_CLK_GATE3, 22, CLK_SET_RATE_PARENT, 0),
GATE(VOU_ACLK, "vou_aclk", "vou_a_mux", TOP_CLK_GATE4, 16, CLK_SET_RATE_PARENT, 0),
GATE(VOU_MAIN_WCLK, "vou_main_wclk", "vou_main_w_mux", TOP_CLK_GATE4, 18, CLK_SET_RATE_PARENT, 0),
GATE(VOU_AUX_WCLK, "vou_aux_wclk", "vou_aux_w_mux", TOP_CLK_GATE4, 19, CLK_SET_RATE_PARENT, 0),
GATE(VOU_PPU_WCLK, "vou_ppu_wclk", "vou_ppu_w_mux", TOP_CLK_GATE4, 20, CLK_SET_RATE_PARENT, 0),
GATE(MIPI_CFG_CLK, "mipi_cfg_clk", "osc24m", TOP_CLK_GATE4, 21, 0, 0),
GATE(VGA_I2C_WCLK, "vga_i2c_wclk", "vga_i2c_mux", TOP_CLK_GATE4, 23, CLK_SET_RATE_PARENT, 0),
GATE(MIPI_REF_CLK, "mipi_ref_clk", "clk27m", TOP_CLK_GATE4, 24, 0, 0),
GATE(HDMI_OSC_CEC, "hdmi_osc_cec", "clk2m", TOP_CLK_GATE4, 22, 0, 0),
GATE(HDMI_OSC_CLK, "hdmi_osc_clk", "clk240m", TOP_CLK_GATE4, 25, 0, 0),
GATE(HDMI_XCLK, "hdmi_xclk", "osc24m", TOP_CLK_GATE4, 26, 0, 0),
GATE(VIU_M0_ACLK, "viu_m0_aclk", "viu_m0_a_mux", TOP_CLK_GATE4, 0, CLK_SET_RATE_PARENT, 0),
GATE(VIU_M1_ACLK, "viu_m1_aclk", "viu_m1_a_mux", TOP_CLK_GATE4, 1, CLK_SET_RATE_PARENT, 0),
GATE(VIU_WCLK, "viu_wclk", "viu_w_mux", TOP_CLK_GATE4, 2, CLK_SET_RATE_PARENT, 0),
GATE(VIU_JPEG_WCLK, "viu_jpeg_wclk", "viu_jpeg_w_mux", TOP_CLK_GATE4, 3, CLK_SET_RATE_PARENT, 0),
GATE(VIU_CFG_CLK, "viu_cfg_clk", "osc24m", TOP_CLK_GATE4, 6, 0, 0),
GATE(TS_SYS_WCLK, "ts_sys_wclk", "ts_sys_mux", TOP_CLK_GATE5, 2, CLK_SET_RATE_PARENT, 0),
GATE(TS_SYS_108M, "ts_sys_108m", "clk108m", TOP_CLK_GATE5, 3, 0, 0),
GATE(USB20_HCLK, "usb20_hclk", "sys_noc_hclk", TOP_CLK_GATE2, 12, 0, 0),
GATE(USB20_PHY_CLK, "usb20_phy_clk", "usb_ref24m_mux", TOP_CLK_GATE2, 13, 0, 0),
GATE(USB21_HCLK, "usb21_hclk", "sys_noc_hclk", TOP_CLK_GATE2, 14, 0, 0),
GATE(USB21_PHY_CLK, "usb21_phy_clk", "usb_ref24m_mux", TOP_CLK_GATE2, 15, 0, 0),
GATE(GMAC_RMIICLK, "gmac_rmii_clk", "clk50m", TOP_CLK_GATE2, 3, 0, 0),
GATE(GMAC_PCLK, "gmac_pclk", "clk198m", TOP_CLK_GATE2, 1, 0, 0),
GATE(GMAC_ACLK, "gmac_aclk", "clk49m5", TOP_CLK_GATE2, 0, 0, 0),
GATE(GMAC_RFCLK, "gmac_refclk", "clk25m", TOP_CLK_GATE2, 4, 0, 0),
GATE(SD1_AHB, "sd1_hclk", "sys_noc_hclk", TOP_CLK_GATE1, 12, 0, 0),
GATE(SD0_AHB, "sd0_hclk", "sys_noc_hclk", TOP_CLK_GATE1, 8, 0, 0),
GATE(TEMPSENSOR_GATE, "tempsensor_gate", "clk4m", TOP_CLK_GATE5, 31, 0, 0),
};
static struct clk_hw_onecell_data top_hw_onecell_data = {
.num = TOP_NR_CLKS,
.hws = {
[TOP_NR_CLKS - 1] = NULL,
},
};
static int __init top_clocks_init(struct device_node *np)
{
void __iomem *reg_base;
int i, ret;
reg_base = of_iomap(np, 0);
if (!reg_base) {
pr_err("%s: Unable to map clk base\n", __func__);
return -ENXIO;
}
for (i = 0; i < ARRAY_SIZE(zx296718_pll_clk); i++) {
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
zx296718_pll_clk[i].reg_base += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &zx296718_pll_clk[i].hw);
if (ret) {
pr_warn("top clk %s init error!\n",
zx296718_pll_clk[i].hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(top_ffactor_clk); i++) {
if (top_ffactor_clk[i].id)
top_hw_onecell_data.hws[top_ffactor_clk[i].id] =
&top_ffactor_clk[i].factor.hw;
ret = clk_hw_register(NULL, &top_ffactor_clk[i].factor.hw);
if (ret) {
pr_warn("top clk %s init error!\n",
top_ffactor_clk[i].factor.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(top_mux_clk); i++) {
if (top_mux_clk[i].id)
top_hw_onecell_data.hws[top_mux_clk[i].id] =
&top_mux_clk[i].mux.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
top_mux_clk[i].mux.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &top_mux_clk[i].mux.hw);
if (ret) {
pr_warn("top clk %s init error!\n",
top_mux_clk[i].mux.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(top_gate_clk); i++) {
if (top_gate_clk[i].id)
top_hw_onecell_data.hws[top_gate_clk[i].id] =
&top_gate_clk[i].gate.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
top_gate_clk[i].gate.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &top_gate_clk[i].gate.hw);
if (ret) {
pr_warn("top clk %s init error!\n",
top_gate_clk[i].gate.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(top_div_clk); i++) {
if (top_div_clk[i].id)
top_hw_onecell_data.hws[top_div_clk[i].id] =
&top_div_clk[i].div.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
top_div_clk[i].div.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &top_div_clk[i].div.hw);
if (ret) {
pr_warn("top clk %s init error!\n",
top_div_clk[i].div.hw.init->name);
}
}
clk: zx296718: do not panic on failure Instead of using panic, we should give an error message and return error code when of_clk_add_hw_provider() call fails. Since we have error prompt for failures, the "init over" pr_info output isn't really necessary but becomes a debug noise. So let's clean it up along the way. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-16 10:26:45 +03:00
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
&top_hw_onecell_data);
if (ret) {
pr_err("failed to register top clk provider: %d\n", ret);
return ret;
}
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
return 0;
}
clk: zte: constify clk_div_table clk_div_table are not supposed to change at runtime. All functions working with clk_div_table provided by <linux/clk-provider.h> work with const clk_div_table. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-28 08:28:53 +03:00
static const struct clk_div_table common_even_div_table[] = {
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
{ .val = 0, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 3, .div = 4, },
{ .val = 5, .div = 6, },
{ .val = 7, .div = 8, },
{ .val = 9, .div = 10, },
{ .val = 11, .div = 12, },
{ .val = 13, .div = 14, },
{ .val = 15, .div = 16, },
};
clk: zte: constify clk_div_table clk_div_table are not supposed to change at runtime. All functions working with clk_div_table provided by <linux/clk-provider.h> work with const clk_div_table. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-28 08:28:53 +03:00
static const struct clk_div_table common_div_table[] = {
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
{ .val = 0, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 2, .div = 3, },
{ .val = 3, .div = 4, },
{ .val = 4, .div = 5, },
{ .val = 5, .div = 6, },
{ .val = 6, .div = 7, },
{ .val = 7, .div = 8, },
{ .val = 8, .div = 9, },
{ .val = 9, .div = 10, },
{ .val = 10, .div = 11, },
{ .val = 11, .div = 12, },
{ .val = 12, .div = 13, },
{ .val = 13, .div = 14, },
{ .val = 14, .div = 15, },
{ .val = 15, .div = 16, },
};
PNAME(lsp0_wclk_common_p) = {
"lsp0_24m",
"lsp0_99m",
};
PNAME(lsp0_wclk_timer3_p) = {
"timer3_div",
"lsp0_32k"
};
PNAME(lsp0_wclk_timer4_p) = {
"timer4_div",
"lsp0_32k"
};
PNAME(lsp0_wclk_timer5_p) = {
"timer5_div",
"lsp0_32k"
};
PNAME(lsp0_wclk_spifc0_p) = {
"lsp0_148m5",
"lsp0_24m",
"lsp0_99m",
"lsp0_74m25"
};
PNAME(lsp0_wclk_ssp_p) = {
"lsp0_148m5",
"lsp0_99m",
"lsp0_24m",
};
static struct zx_clk_mux lsp0_mux_clk[] = {
MUX(0, "timer3_wclk_mux", lsp0_wclk_timer3_p, LSP0_TIMER3_CLK, 4, 1),
MUX(0, "timer4_wclk_mux", lsp0_wclk_timer4_p, LSP0_TIMER4_CLK, 4, 1),
MUX(0, "timer5_wclk_mux", lsp0_wclk_timer5_p, LSP0_TIMER5_CLK, 4, 1),
MUX(0, "uart3_wclk_mux", lsp0_wclk_common_p, LSP0_UART3_CLK, 4, 1),
MUX(0, "uart1_wclk_mux", lsp0_wclk_common_p, LSP0_UART1_CLK, 4, 1),
MUX(0, "uart2_wclk_mux", lsp0_wclk_common_p, LSP0_UART2_CLK, 4, 1),
MUX(0, "spifc0_wclk_mux", lsp0_wclk_spifc0_p, LSP0_SPIFC0_CLK, 4, 2),
MUX(0, "i2c4_wclk_mux", lsp0_wclk_common_p, LSP0_I2C4_CLK, 4, 1),
MUX(0, "i2c5_wclk_mux", lsp0_wclk_common_p, LSP0_I2C5_CLK, 4, 1),
MUX(0, "ssp0_wclk_mux", lsp0_wclk_ssp_p, LSP0_SSP0_CLK, 4, 1),
MUX(0, "ssp1_wclk_mux", lsp0_wclk_ssp_p, LSP0_SSP1_CLK, 4, 1),
MUX(0, "i2c3_wclk_mux", lsp0_wclk_common_p, LSP0_I2C3_CLK, 4, 1),
};
static struct zx_clk_gate lsp0_gate_clk[] = {
GATE(LSP0_TIMER3_WCLK, "timer3_wclk", "timer3_wclk_mux", LSP0_TIMER3_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_TIMER4_WCLK, "timer4_wclk", "timer4_wclk_mux", LSP0_TIMER4_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_TIMER5_WCLK, "timer5_wclk", "timer5_wclk_mux", LSP0_TIMER5_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_UART3_WCLK, "uart3_wclk", "uart3_wclk_mux", LSP0_UART3_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_UART1_WCLK, "uart1_wclk", "uart1_wclk_mux", LSP0_UART1_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_UART2_WCLK, "uart2_wclk", "uart2_wclk_mux", LSP0_UART2_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_SPIFC0_WCLK, "spifc0_wclk", "spifc0_wclk_mux", LSP0_SPIFC0_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_I2C4_WCLK, "i2c4_wclk", "i2c4_wclk_mux", LSP0_I2C4_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_I2C5_WCLK, "i2c5_wclk", "i2c5_wclk_mux", LSP0_I2C5_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_SSP0_WCLK, "ssp0_wclk", "ssp0_div", LSP0_SSP0_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_SSP1_WCLK, "ssp1_wclk", "ssp1_div", LSP0_SSP1_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP0_I2C3_WCLK, "i2c3_wclk", "i2c3_wclk_mux", LSP0_I2C3_CLK, 1, CLK_SET_RATE_PARENT, 0),
};
static struct zx_clk_div lsp0_div_clk[] = {
DIV_T(0, "timer3_div", "lsp0_24m", LSP0_TIMER3_CLK, 12, 4, 0, common_even_div_table),
DIV_T(0, "timer4_div", "lsp0_24m", LSP0_TIMER4_CLK, 12, 4, 0, common_even_div_table),
DIV_T(0, "timer5_div", "lsp0_24m", LSP0_TIMER5_CLK, 12, 4, 0, common_even_div_table),
DIV_T(0, "ssp0_div", "ssp0_wclk_mux", LSP0_SSP0_CLK, 12, 4, 0, common_even_div_table),
DIV_T(0, "ssp1_div", "ssp1_wclk_mux", LSP0_SSP1_CLK, 12, 4, 0, common_even_div_table),
};
static struct clk_hw_onecell_data lsp0_hw_onecell_data = {
.num = LSP0_NR_CLKS,
.hws = {
[LSP0_NR_CLKS - 1] = NULL,
},
};
static int __init lsp0_clocks_init(struct device_node *np)
{
void __iomem *reg_base;
int i, ret;
reg_base = of_iomap(np, 0);
if (!reg_base) {
pr_err("%s: Unable to map clk base\n", __func__);
return -ENXIO;
}
for (i = 0; i < ARRAY_SIZE(lsp0_mux_clk); i++) {
if (lsp0_mux_clk[i].id)
lsp0_hw_onecell_data.hws[lsp0_mux_clk[i].id] =
&lsp0_mux_clk[i].mux.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
lsp0_mux_clk[i].mux.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &lsp0_mux_clk[i].mux.hw);
if (ret) {
pr_warn("lsp0 clk %s init error!\n",
lsp0_mux_clk[i].mux.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(lsp0_gate_clk); i++) {
if (lsp0_gate_clk[i].id)
lsp0_hw_onecell_data.hws[lsp0_gate_clk[i].id] =
&lsp0_gate_clk[i].gate.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
lsp0_gate_clk[i].gate.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &lsp0_gate_clk[i].gate.hw);
if (ret) {
pr_warn("lsp0 clk %s init error!\n",
lsp0_gate_clk[i].gate.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(lsp0_div_clk); i++) {
if (lsp0_div_clk[i].id)
lsp0_hw_onecell_data.hws[lsp0_div_clk[i].id] =
&lsp0_div_clk[i].div.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
lsp0_div_clk[i].div.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &lsp0_div_clk[i].div.hw);
if (ret) {
pr_warn("lsp0 clk %s init error!\n",
lsp0_div_clk[i].div.hw.init->name);
}
}
clk: zx296718: do not panic on failure Instead of using panic, we should give an error message and return error code when of_clk_add_hw_provider() call fails. Since we have error prompt for failures, the "init over" pr_info output isn't really necessary but becomes a debug noise. So let's clean it up along the way. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-16 10:26:45 +03:00
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
&lsp0_hw_onecell_data);
if (ret) {
pr_err("failed to register lsp0 clk provider: %d\n", ret);
return ret;
}
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
return 0;
}
PNAME(lsp1_wclk_common_p) = {
"lsp1_24m",
"lsp1_99m",
};
PNAME(lsp1_wclk_ssp_p) = {
"lsp1_148m5",
"lsp1_99m",
"lsp1_24m",
};
static struct zx_clk_mux lsp1_mux_clk[] = {
MUX(0, "uart4_wclk_mux", lsp1_wclk_common_p, LSP1_UART4_CLK, 4, 1),
MUX(0, "uart5_wclk_mux", lsp1_wclk_common_p, LSP1_UART5_CLK, 4, 1),
MUX(0, "pwm_wclk_mux", lsp1_wclk_common_p, LSP1_PWM_CLK, 4, 1),
MUX(0, "i2c2_wclk_mux", lsp1_wclk_common_p, LSP1_I2C2_CLK, 4, 1),
MUX(0, "ssp2_wclk_mux", lsp1_wclk_ssp_p, LSP1_SSP2_CLK, 4, 2),
MUX(0, "ssp3_wclk_mux", lsp1_wclk_ssp_p, LSP1_SSP3_CLK, 4, 2),
MUX(0, "ssp4_wclk_mux", lsp1_wclk_ssp_p, LSP1_SSP4_CLK, 4, 2),
MUX(0, "usim1_wclk_mux", lsp1_wclk_common_p, LSP1_USIM1_CLK, 4, 1),
};
static struct zx_clk_div lsp1_div_clk[] = {
DIV_T(0, "pwm_div", "pwm_wclk_mux", LSP1_PWM_CLK, 12, 4, CLK_SET_RATE_PARENT, common_div_table),
DIV_T(0, "ssp2_div", "ssp2_wclk_mux", LSP1_SSP2_CLK, 12, 4, CLK_SET_RATE_PARENT, common_even_div_table),
DIV_T(0, "ssp3_div", "ssp3_wclk_mux", LSP1_SSP3_CLK, 12, 4, CLK_SET_RATE_PARENT, common_even_div_table),
DIV_T(0, "ssp4_div", "ssp4_wclk_mux", LSP1_SSP4_CLK, 12, 4, CLK_SET_RATE_PARENT, common_even_div_table),
};
static struct zx_clk_gate lsp1_gate_clk[] = {
GATE(LSP1_UART4_WCLK, "lsp1_uart4_wclk", "uart4_wclk_mux", LSP1_UART4_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP1_UART5_WCLK, "lsp1_uart5_wclk", "uart5_wclk_mux", LSP1_UART5_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP1_PWM_WCLK, "lsp1_pwm_wclk", "pwm_div", LSP1_PWM_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP1_PWM_PCLK, "lsp1_pwm_pclk", "lsp1_pclk", LSP1_PWM_CLK, 0, 0, 0),
GATE(LSP1_I2C2_WCLK, "lsp1_i2c2_wclk", "i2c2_wclk_mux", LSP1_I2C2_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP1_SSP2_WCLK, "lsp1_ssp2_wclk", "ssp2_div", LSP1_SSP2_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP1_SSP3_WCLK, "lsp1_ssp3_wclk", "ssp3_div", LSP1_SSP3_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP1_SSP4_WCLK, "lsp1_ssp4_wclk", "ssp4_div", LSP1_SSP4_CLK, 1, CLK_SET_RATE_PARENT, 0),
GATE(LSP1_USIM1_WCLK, "lsp1_usim1_wclk", "usim1_wclk_mux", LSP1_USIM1_CLK, 1, CLK_SET_RATE_PARENT, 0),
};
static struct clk_hw_onecell_data lsp1_hw_onecell_data = {
.num = LSP1_NR_CLKS,
.hws = {
[LSP1_NR_CLKS - 1] = NULL,
},
};
static int __init lsp1_clocks_init(struct device_node *np)
{
void __iomem *reg_base;
int i, ret;
reg_base = of_iomap(np, 0);
if (!reg_base) {
pr_err("%s: Unable to map clk base\n", __func__);
return -ENXIO;
}
for (i = 0; i < ARRAY_SIZE(lsp1_mux_clk); i++) {
if (lsp1_mux_clk[i].id)
lsp1_hw_onecell_data.hws[lsp1_mux_clk[i].id] =
&lsp0_mux_clk[i].mux.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
lsp1_mux_clk[i].mux.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &lsp1_mux_clk[i].mux.hw);
if (ret) {
pr_warn("lsp1 clk %s init error!\n",
lsp1_mux_clk[i].mux.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(lsp1_gate_clk); i++) {
if (lsp1_gate_clk[i].id)
lsp1_hw_onecell_data.hws[lsp1_gate_clk[i].id] =
&lsp1_gate_clk[i].gate.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
lsp1_gate_clk[i].gate.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &lsp1_gate_clk[i].gate.hw);
if (ret) {
pr_warn("lsp1 clk %s init error!\n",
lsp1_gate_clk[i].gate.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(lsp1_div_clk); i++) {
if (lsp1_div_clk[i].id)
lsp1_hw_onecell_data.hws[lsp1_div_clk[i].id] =
&lsp1_div_clk[i].div.hw;
clk: zx: fix pointer case warnings The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-15 18:45:57 +03:00
lsp1_div_clk[i].div.reg += (uintptr_t)reg_base;
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
ret = clk_hw_register(NULL, &lsp1_div_clk[i].div.hw);
if (ret) {
pr_warn("lsp1 clk %s init error!\n",
lsp1_div_clk[i].div.hw.init->name);
}
}
clk: zx296718: do not panic on failure Instead of using panic, we should give an error message and return error code when of_clk_add_hw_provider() call fails. Since we have error prompt for failures, the "init over" pr_info output isn't really necessary but becomes a debug noise. So let's clean it up along the way. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-16 10:26:45 +03:00
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
&lsp1_hw_onecell_data);
if (ret) {
pr_err("failed to register lsp1 clk provider: %d\n", ret);
return ret;
}
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
return 0;
}
clk: zte: add audio clocks for zx296718 The audio related clock support is missing from the existing zx296718 clock driver. Let's add it, so that the upstream ZX SPDIF driver can work for HDMI audio support. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [sboyd@codeaurora.org: Staticize some more structures] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-16 10:26:47 +03:00
PNAME(audio_wclk_common_p) = {
"audio_99m",
"audio_24m",
};
PNAME(audio_timer_p) = {
"audio_24m",
"audio_32k",
};
static struct zx_clk_mux audio_mux_clk[] = {
clk: zx296718: export I2S mux clocks Export I2S mux clocks, so that device tree can refer to them for setting a better parent clock for I2S work clock. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-17 17:21:05 +03:00
MUX(I2S0_WCLK_MUX, "i2s0_wclk_mux", audio_wclk_common_p, AUDIO_I2S0_CLK, 0, 1),
MUX(I2S1_WCLK_MUX, "i2s1_wclk_mux", audio_wclk_common_p, AUDIO_I2S1_CLK, 0, 1),
MUX(I2S2_WCLK_MUX, "i2s2_wclk_mux", audio_wclk_common_p, AUDIO_I2S2_CLK, 0, 1),
MUX(I2S3_WCLK_MUX, "i2s3_wclk_mux", audio_wclk_common_p, AUDIO_I2S3_CLK, 0, 1),
clk: zte: add audio clocks for zx296718 The audio related clock support is missing from the existing zx296718 clock driver. Let's add it, so that the upstream ZX SPDIF driver can work for HDMI audio support. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [sboyd@codeaurora.org: Staticize some more structures] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-16 10:26:47 +03:00
MUX(0, "i2c0_wclk_mux", audio_wclk_common_p, AUDIO_I2C0_CLK, 0, 1),
MUX(0, "spdif0_wclk_mux", audio_wclk_common_p, AUDIO_SPDIF0_CLK, 0, 1),
MUX(0, "spdif1_wclk_mux", audio_wclk_common_p, AUDIO_SPDIF1_CLK, 0, 1),
MUX(0, "timer_wclk_mux", audio_timer_p, AUDIO_TIMER_CLK, 0, 1),
};
static struct clk_zx_audio_divider audio_adiv_clk[] = {
AUDIO_DIV(0, "i2s0_wclk_div", "i2s0_wclk_mux", AUDIO_I2S0_DIV_CFG1),
AUDIO_DIV(0, "i2s1_wclk_div", "i2s1_wclk_mux", AUDIO_I2S1_DIV_CFG1),
AUDIO_DIV(0, "i2s2_wclk_div", "i2s2_wclk_mux", AUDIO_I2S2_DIV_CFG1),
AUDIO_DIV(0, "i2s3_wclk_div", "i2s3_wclk_mux", AUDIO_I2S3_DIV_CFG1),
AUDIO_DIV(0, "spdif0_wclk_div", "spdif0_wclk_mux", AUDIO_SPDIF0_DIV_CFG1),
AUDIO_DIV(0, "spdif1_wclk_div", "spdif1_wclk_mux", AUDIO_SPDIF1_DIV_CFG1),
};
static struct zx_clk_div audio_div_clk[] = {
DIV_T(0, "tdm_wclk_div", "audio_16m384", AUDIO_TDM_CLK, 8, 4, 0, common_div_table),
};
static struct zx_clk_gate audio_gate_clk[] = {
GATE(AUDIO_I2S0_WCLK, "i2s0_wclk", "i2s0_wclk_div", AUDIO_I2S0_CLK, 9, CLK_SET_RATE_PARENT, 0),
GATE(AUDIO_I2S1_WCLK, "i2s1_wclk", "i2s1_wclk_div", AUDIO_I2S1_CLK, 9, CLK_SET_RATE_PARENT, 0),
GATE(AUDIO_I2S2_WCLK, "i2s2_wclk", "i2s2_wclk_div", AUDIO_I2S2_CLK, 9, CLK_SET_RATE_PARENT, 0),
GATE(AUDIO_I2S3_WCLK, "i2s3_wclk", "i2s3_wclk_div", AUDIO_I2S3_CLK, 9, CLK_SET_RATE_PARENT, 0),
clk: zte: add i2s clocks for zx296718 The i2s related clock support is missing from the existing zx296718 clock driver. This patch adds it, so that the upstream ZX I2S driver can work out. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-02-09 06:12:56 +03:00
GATE(AUDIO_I2S0_PCLK, "i2s0_pclk", "clk49m5", AUDIO_I2S0_CLK, 8, 0, 0),
GATE(AUDIO_I2S1_PCLK, "i2s1_pclk", "clk49m5", AUDIO_I2S1_CLK, 8, 0, 0),
GATE(AUDIO_I2S2_PCLK, "i2s2_pclk", "clk49m5", AUDIO_I2S2_CLK, 8, 0, 0),
GATE(AUDIO_I2S3_PCLK, "i2s3_pclk", "clk49m5", AUDIO_I2S3_CLK, 8, 0, 0),
clk: zte: add audio clocks for zx296718 The audio related clock support is missing from the existing zx296718 clock driver. Let's add it, so that the upstream ZX SPDIF driver can work for HDMI audio support. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [sboyd@codeaurora.org: Staticize some more structures] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-16 10:26:47 +03:00
GATE(AUDIO_I2C0_WCLK, "i2c0_wclk", "i2c0_wclk_mux", AUDIO_I2C0_CLK, 9, CLK_SET_RATE_PARENT, 0),
GATE(AUDIO_SPDIF0_WCLK, "spdif0_wclk", "spdif0_wclk_div", AUDIO_SPDIF0_CLK, 9, CLK_SET_RATE_PARENT, 0),
GATE(AUDIO_SPDIF1_WCLK, "spdif1_wclk", "spdif1_wclk_div", AUDIO_SPDIF1_CLK, 9, CLK_SET_RATE_PARENT, 0),
GATE(AUDIO_TDM_WCLK, "tdm_wclk", "tdm_wclk_div", AUDIO_TDM_CLK, 17, CLK_SET_RATE_PARENT, 0),
GATE(AUDIO_TS_PCLK, "tempsensor_pclk", "clk49m5", AUDIO_TS_CLK, 1, 0, 0),
};
static struct clk_hw_onecell_data audio_hw_onecell_data = {
.num = AUDIO_NR_CLKS,
.hws = {
[AUDIO_NR_CLKS - 1] = NULL,
},
};
static int __init audio_clocks_init(struct device_node *np)
{
void __iomem *reg_base;
int i, ret;
reg_base = of_iomap(np, 0);
if (!reg_base) {
pr_err("%s: Unable to map audio clk base\n", __func__);
return -ENXIO;
}
for (i = 0; i < ARRAY_SIZE(audio_mux_clk); i++) {
if (audio_mux_clk[i].id)
audio_hw_onecell_data.hws[audio_mux_clk[i].id] =
&audio_mux_clk[i].mux.hw;
audio_mux_clk[i].mux.reg += (uintptr_t)reg_base;
ret = clk_hw_register(NULL, &audio_mux_clk[i].mux.hw);
if (ret) {
pr_warn("audio clk %s init error!\n",
audio_mux_clk[i].mux.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(audio_adiv_clk); i++) {
if (audio_adiv_clk[i].id)
audio_hw_onecell_data.hws[audio_adiv_clk[i].id] =
&audio_adiv_clk[i].hw;
audio_adiv_clk[i].reg_base += (uintptr_t)reg_base;
ret = clk_hw_register(NULL, &audio_adiv_clk[i].hw);
if (ret) {
pr_warn("audio clk %s init error!\n",
audio_adiv_clk[i].hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(audio_div_clk); i++) {
if (audio_div_clk[i].id)
audio_hw_onecell_data.hws[audio_div_clk[i].id] =
&audio_div_clk[i].div.hw;
audio_div_clk[i].div.reg += (uintptr_t)reg_base;
ret = clk_hw_register(NULL, &audio_div_clk[i].div.hw);
if (ret) {
pr_warn("audio clk %s init error!\n",
audio_div_clk[i].div.hw.init->name);
}
}
for (i = 0; i < ARRAY_SIZE(audio_gate_clk); i++) {
if (audio_gate_clk[i].id)
audio_hw_onecell_data.hws[audio_gate_clk[i].id] =
&audio_gate_clk[i].gate.hw;
audio_gate_clk[i].gate.reg += (uintptr_t)reg_base;
ret = clk_hw_register(NULL, &audio_gate_clk[i].gate.hw);
if (ret) {
pr_warn("audio clk %s init error!\n",
audio_gate_clk[i].gate.hw.init->name);
}
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
&audio_hw_onecell_data);
if (ret) {
pr_err("failed to register audio clk provider: %d\n", ret);
return ret;
}
return 0;
}
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
static const struct of_device_id zx_clkc_match_table[] = {
{ .compatible = "zte,zx296718-topcrm", .data = &top_clocks_init },
{ .compatible = "zte,zx296718-lsp0crm", .data = &lsp0_clocks_init },
{ .compatible = "zte,zx296718-lsp1crm", .data = &lsp1_clocks_init },
clk: zte: add audio clocks for zx296718 The audio related clock support is missing from the existing zx296718 clock driver. Let's add it, so that the upstream ZX SPDIF driver can work for HDMI audio support. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [sboyd@codeaurora.org: Staticize some more structures] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-16 10:26:47 +03:00
{ .compatible = "zte,zx296718-audiocrm", .data = &audio_clocks_init },
clk: zx: register ZX296718 clocks The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-06 09:02:42 +03:00
{ }
};
static int zx_clkc_probe(struct platform_device *pdev)
{
int (*init_fn)(struct device_node *np);
struct device_node *np = pdev->dev.of_node;
init_fn = of_device_get_match_data(&pdev->dev);
if (!init_fn) {
dev_err(&pdev->dev, "Error: No device match found\n");
return -ENODEV;
}
return init_fn(np);
}
static struct platform_driver zx_clk_driver = {
.probe = zx_clkc_probe,
.driver = {
.name = "zx296718-clkc",
.of_match_table = zx_clkc_match_table,
},
};
clk: zx296718: register driver earlier with core_initcall Clock driver should be registered with an earlier initcall than module_init which is used by most of client device drivers. Otherwise, probing of these client drivers will likely be deferred due to that calls into clk API will return -EPROBE_DEFER. Deferred probing is not a problem for most subsystems, but could bring some side effect for particular subsystem, like display. On ZX296718 platform, we get Linux logo and boot log lost from display device, just because the DRM/KMS driver gets -EPROBE_DEFER from devm_clk_get() call. Let's use core_initcall (qcom and a few other clk drivers use that) for driver registration to avoid those unnecessary -EPROBE_DEFER and get rid of the side effect with ZX296718 display system. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-23 04:45:08 +03:00
static int __init zx_clk_init(void)
{
return platform_driver_register(&zx_clk_driver);
}
core_initcall(zx_clk_init);