WSL2-Linux-Kernel/mm/readahead.c

584 строки
17 KiB
C
Исходник Обычный вид История

/*
* mm/readahead.c - address_space-level file readahead.
*
* Copyright (C) 2002, Linus Torvalds
*
* 09Apr2002 akpm@zip.com.au
* Initial version.
*/
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/pagevec.h>
void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
{
}
EXPORT_SYMBOL(default_unplug_io_fn);
struct backing_dev_info default_backing_dev_info = {
.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE,
.state = 0,
.capabilities = BDI_CAP_MAP_COPY,
.unplug_io_fn = default_unplug_io_fn,
};
EXPORT_SYMBOL_GPL(default_backing_dev_info);
/*
* Initialise a struct file's readahead state. Assumes that the caller has
* memset *ra to zero.
*/
void
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping)
{
ra->ra_pages = mapping->backing_dev_info->ra_pages;
ra->prev_index = -1;
}
EXPORT_SYMBOL_GPL(file_ra_state_init);
/*
* Return max readahead size for this inode in number-of-pages.
*/
static inline unsigned long get_max_readahead(struct file_ra_state *ra)
{
return ra->ra_pages;
}
static inline unsigned long get_min_readahead(struct file_ra_state *ra)
{
return (VM_MIN_READAHEAD * 1024) / PAGE_CACHE_SIZE;
}
static inline void reset_ahead_window(struct file_ra_state *ra)
{
/*
* ... but preserve ahead_start + ahead_size value,
* see 'recheck:' label in page_cache_readahead().
* Note: We never use ->ahead_size as rvalue without
* checking ->ahead_start != 0 first.
*/
ra->ahead_size += ra->ahead_start;
ra->ahead_start = 0;
}
static inline void ra_off(struct file_ra_state *ra)
{
ra->start = 0;
ra->flags = 0;
ra->size = 0;
reset_ahead_window(ra);
return;
}
/*
* Set the initial window size, round to next power of 2 and square
* for small size, x 4 for medium, and x 2 for large
* for 128k (32 page) max ra
* 1-8 page = 32k initial, > 8 page = 128k initial
*/
static unsigned long get_init_ra_size(unsigned long size, unsigned long max)
{
unsigned long newsize = roundup_pow_of_two(size);
if (newsize <= max / 32)
newsize = newsize * 4;
else if (newsize <= max / 4)
newsize = newsize * 2;
else
newsize = max;
return newsize;
}
/*
* Set the new window size, this is called only when I/O is to be submitted,
* not for each call to readahead. If a cache miss occured, reduce next I/O
* size, else increase depending on how close to max we are.
*/
static inline unsigned long get_next_ra_size(struct file_ra_state *ra)
{
unsigned long max = get_max_readahead(ra);
unsigned long min = get_min_readahead(ra);
unsigned long cur = ra->size;
unsigned long newsize;
if (ra->flags & RA_FLAG_MISS) {
ra->flags &= ~RA_FLAG_MISS;
newsize = max((cur - 2), min);
} else if (cur < max / 16) {
newsize = 4 * cur;
} else {
newsize = 2 * cur;
}
return min(newsize, max);
}
#define list_to_page(head) (list_entry((head)->prev, struct page, lru))
/**
* read_cache_pages - populate an address space with some pages & start reads against them
* @mapping: the address_space
* @pages: The address of a list_head which contains the target pages. These
* pages have their ->index populated and are otherwise uninitialised.
* @filler: callback routine for filling a single page.
* @data: private data for the callback routine.
*
* Hides the details of the LRU cache etc from the filesystems.
*/
int read_cache_pages(struct address_space *mapping, struct list_head *pages,
int (*filler)(void *, struct page *), void *data)
{
struct page *page;
struct pagevec lru_pvec;
int ret = 0;
pagevec_init(&lru_pvec, 0);
while (!list_empty(pages)) {
page = list_to_page(pages);
list_del(&page->lru);
if (add_to_page_cache(page, mapping, page->index, GFP_KERNEL)) {
page_cache_release(page);
continue;
}
ret = filler(data, page);
if (!pagevec_add(&lru_pvec, page))
__pagevec_lru_add(&lru_pvec);
if (ret) {
put_pages_list(pages);
break;
}
task_io_account_read(PAGE_CACHE_SIZE);
}
pagevec_lru_add(&lru_pvec);
return ret;
}
EXPORT_SYMBOL(read_cache_pages);
static int read_pages(struct address_space *mapping, struct file *filp,
struct list_head *pages, unsigned nr_pages)
{
unsigned page_idx;
struct pagevec lru_pvec;
int ret;
if (mapping->a_ops->readpages) {
ret = mapping->a_ops->readpages(filp, mapping, pages, nr_pages);
/* Clean up the remaining pages */
put_pages_list(pages);
goto out;
}
pagevec_init(&lru_pvec, 0);
for (page_idx = 0; page_idx < nr_pages; page_idx++) {
struct page *page = list_to_page(pages);
list_del(&page->lru);
if (!add_to_page_cache(page, mapping,
page->index, GFP_KERNEL)) {
mapping->a_ops->readpage(filp, page);
if (!pagevec_add(&lru_pvec, page))
__pagevec_lru_add(&lru_pvec);
} else
page_cache_release(page);
}
pagevec_lru_add(&lru_pvec);
ret = 0;
out:
return ret;
}
/*
* Readahead design.
*
* The fields in struct file_ra_state represent the most-recently-executed
* readahead attempt:
*
* start: Page index at which we started the readahead
* size: Number of pages in that read
* Together, these form the "current window".
* Together, start and size represent the `readahead window'.
* prev_index: The page which the readahead algorithm most-recently inspected.
* It is mainly used to detect sequential file reading.
* If page_cache_readahead sees that it is again being called for
* a page which it just looked at, it can return immediately without
* making any state changes.
* offset: Offset in the prev_index where the last read ended - used for
* detection of sequential file reading.
* ahead_start,
* ahead_size: Together, these form the "ahead window".
* ra_pages: The externally controlled max readahead for this fd.
*
* When readahead is in the off state (size == 0), readahead is disabled.
* In this state, prev_index is used to detect the resumption of sequential I/O.
*
* The readahead code manages two windows - the "current" and the "ahead"
* windows. The intent is that while the application is walking the pages
* in the current window, I/O is underway on the ahead window. When the
* current window is fully traversed, it is replaced by the ahead window
* and the ahead window is invalidated. When this copying happens, the
* new current window's pages are probably still locked. So
* we submit a new batch of I/O immediately, creating a new ahead window.
*
* So:
*
* ----|----------------|----------------|-----
* ^start ^start+size
* ^ahead_start ^ahead_start+ahead_size
*
* ^ When this page is read, we submit I/O for the
* ahead window.
*
* A `readahead hit' occurs when a read request is made against a page which is
* the next sequential page. Ahead window calculations are done only when it
* is time to submit a new IO. The code ramps up the size agressively at first,
* but slow down as it approaches max_readhead.
*
* Any seek/ramdom IO will result in readahead being turned off. It will resume
* at the first sequential access.
*
* There is a special-case: if the first page which the application tries to
* read happens to be the first page of the file, it is assumed that a linear
* read is about to happen and the window is immediately set to the initial size
* based on I/O request size and the max_readahead.
*
* This function is to be called for every read request, rather than when
* it is time to perform readahead. It is called only once for the entire I/O
* regardless of size unless readahead is unable to start enough I/O to satisfy
* the request (I/O request > max_readahead).
*/
/*
* do_page_cache_readahead actually reads a chunk of disk. It allocates all
* the pages first, then submits them all for I/O. This avoids the very bad
* behaviour which would occur if page allocations are causing VM writeback.
* We really don't want to intermingle reads and writes like that.
*
* Returns the number of pages requested, or the maximum amount of I/O allowed.
*
* do_page_cache_readahead() returns -1 if it encountered request queue
* congestion.
*/
static int
__do_page_cache_readahead(struct address_space *mapping, struct file *filp,
pgoff_t offset, unsigned long nr_to_read)
{
struct inode *inode = mapping->host;
struct page *page;
unsigned long end_index; /* The last page we want to read */
LIST_HEAD(page_pool);
int page_idx;
int ret = 0;
loff_t isize = i_size_read(inode);
if (isize == 0)
goto out;
end_index = ((isize - 1) >> PAGE_CACHE_SHIFT);
/*
* Preallocate as many pages as we will need.
*/
read_lock_irq(&mapping->tree_lock);
for (page_idx = 0; page_idx < nr_to_read; page_idx++) {
pgoff_t page_offset = offset + page_idx;
if (page_offset > end_index)
break;
page = radix_tree_lookup(&mapping->page_tree, page_offset);
if (page)
continue;
read_unlock_irq(&mapping->tree_lock);
page = page_cache_alloc_cold(mapping);
read_lock_irq(&mapping->tree_lock);
if (!page)
break;
page->index = page_offset;
list_add(&page->lru, &page_pool);
ret++;
}
read_unlock_irq(&mapping->tree_lock);
/*
* Now start the IO. We ignore I/O errors - if the page is not
* uptodate then the caller will launch readpage again, and
* will then handle the error.
*/
if (ret)
read_pages(mapping, filp, &page_pool, ret);
BUG_ON(!list_empty(&page_pool));
out:
return ret;
}
/*
* Chunk the readahead into 2 megabyte units, so that we don't pin too much
* memory at once.
*/
int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
pgoff_t offset, unsigned long nr_to_read)
{
int ret = 0;
if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages))
return -EINVAL;
while (nr_to_read) {
int err;
unsigned long this_chunk = (2 * 1024 * 1024) / PAGE_CACHE_SIZE;
if (this_chunk > nr_to_read)
this_chunk = nr_to_read;
err = __do_page_cache_readahead(mapping, filp,
offset, this_chunk);
if (err < 0) {
ret = err;
break;
}
ret += err;
offset += this_chunk;
nr_to_read -= this_chunk;
}
return ret;
}
/*
* Check how effective readahead is being. If the amount of started IO is
* less than expected then the file is partly or fully in pagecache and
* readahead isn't helping.
*
*/
static inline int check_ra_success(struct file_ra_state *ra,
unsigned long nr_to_read, unsigned long actual)
{
if (actual == 0) {
ra->cache_hit += nr_to_read;
if (ra->cache_hit >= VM_MAX_CACHE_HIT) {
ra_off(ra);
ra->flags |= RA_FLAG_INCACHE;
return 0;
}
} else {
ra->cache_hit=0;
}
return 1;
}
/*
* This version skips the IO if the queue is read-congested, and will tell the
* block layer to abandon the readahead if request allocation would block.
*
* force_page_cache_readahead() will ignore queue congestion and will block on
* request queues.
*/
int do_page_cache_readahead(struct address_space *mapping, struct file *filp,
pgoff_t offset, unsigned long nr_to_read)
{
if (bdi_read_congested(mapping->backing_dev_info))
return -1;
return __do_page_cache_readahead(mapping, filp, offset, nr_to_read);
}
/*
* Read 'nr_to_read' pages starting at page 'offset'. If the flag 'block'
* is set wait till the read completes. Otherwise attempt to read without
* blocking.
* Returns 1 meaning 'success' if read is successful without switching off
* readahead mode. Otherwise return failure.
*/
static int
blockable_page_cache_readahead(struct address_space *mapping, struct file *filp,
pgoff_t offset, unsigned long nr_to_read,
struct file_ra_state *ra, int block)
{
int actual;
if (!block && bdi_read_congested(mapping->backing_dev_info))
return 0;
actual = __do_page_cache_readahead(mapping, filp, offset, nr_to_read);
return check_ra_success(ra, nr_to_read, actual);
}
static int make_ahead_window(struct address_space *mapping, struct file *filp,
struct file_ra_state *ra, int force)
{
int block, ret;
ra->ahead_size = get_next_ra_size(ra);
ra->ahead_start = ra->start + ra->size;
block = force || (ra->prev_index >= ra->ahead_start);
ret = blockable_page_cache_readahead(mapping, filp,
ra->ahead_start, ra->ahead_size, ra, block);
if (!ret && !force) {
/* A read failure in blocking mode, implies pages are
* all cached. So we can safely assume we have taken
* care of all the pages requested in this call.
* A read failure in non-blocking mode, implies we are
* reading more pages than requested in this call. So
* we safely assume we have taken care of all the pages
* requested in this call.
*
* Just reset the ahead window in case we failed due to
* congestion. The ahead window will any way be closed
* in case we failed due to excessive page cache hits.
*/
reset_ahead_window(ra);
}
return ret;
}
/**
* page_cache_readahead - generic adaptive readahead
* @mapping: address_space which holds the pagecache and I/O vectors
* @ra: file_ra_state which holds the readahead state
* @filp: passed on to ->readpage() and ->readpages()
* @offset: start offset into @mapping, in PAGE_CACHE_SIZE units
* @req_size: hint: total size of the read which the caller is performing in
* PAGE_CACHE_SIZE units
*
* page_cache_readahead() is the main function. If performs the adaptive
* readahead window size management and submits the readahead I/O.
*
* Note that @filp is purely used for passing on to the ->readpage[s]()
* handler: it may refer to a different file from @mapping (so we may not use
* @filp->f_mapping or @filp->f_path.dentry->d_inode here).
* Also, @ra may not be equal to &@filp->f_ra.
*
*/
unsigned long
page_cache_readahead(struct address_space *mapping, struct file_ra_state *ra,
struct file *filp, pgoff_t offset, unsigned long req_size)
{
unsigned long max, newsize;
int sequential;
/*
* We avoid doing extra work and bogusly perturbing the readahead
* window expansion logic.
*/
if (offset == ra->prev_index && --req_size)
++offset;
/* Note that prev_index == -1 if it is a first read */
sequential = (offset == ra->prev_index + 1);
ra->prev_index = offset;
ra->prev_offset = 0;
max = get_max_readahead(ra);
newsize = min(req_size, max);
/* No readahead or sub-page sized read or file already in cache */
if (newsize == 0 || (ra->flags & RA_FLAG_INCACHE))
goto out;
ra->prev_index += newsize - 1;
/*
* Special case - first read at start of file. We'll assume it's
* a whole-file read and grow the window fast. Or detect first
* sequential access
*/
if (sequential && ra->size == 0) {
ra->size = get_init_ra_size(newsize, max);
ra->start = offset;
if (!blockable_page_cache_readahead(mapping, filp, offset,
ra->size, ra, 1))
goto out;
/*
* If the request size is larger than our max readahead, we
* at least want to be sure that we get 2 IOs in flight and
* we know that we will definitly need the new I/O.
* once we do this, subsequent calls should be able to overlap
* IOs,* thus preventing stalls. so issue the ahead window
* immediately.
*/
if (req_size >= max)
make_ahead_window(mapping, filp, ra, 1);
goto out;
}
/*
* Now handle the random case:
* partial page reads and first access were handled above,
* so this must be the next page otherwise it is random
*/
if (!sequential) {
ra_off(ra);
blockable_page_cache_readahead(mapping, filp, offset,
newsize, ra, 1);
goto out;
}
/*
* If we get here we are doing sequential IO and this was not the first
* occurence (ie we have an existing window)
*/
if (ra->ahead_start == 0) { /* no ahead window yet */
if (!make_ahead_window(mapping, filp, ra, 0))
goto recheck;
}
/*
* Already have an ahead window, check if we crossed into it.
* If so, shift windows and issue a new ahead window.
* Only return the #pages that are in the current window, so that
* we get called back on the first page of the ahead window which
* will allow us to submit more IO.
*/
if (ra->prev_index >= ra->ahead_start) {
ra->start = ra->ahead_start;
ra->size = ra->ahead_size;
make_ahead_window(mapping, filp, ra, 0);
recheck:
/* prev_index shouldn't overrun the ahead window */
ra->prev_index = min(ra->prev_index,
ra->ahead_start + ra->ahead_size - 1);
}
out:
return ra->prev_index + 1;
}
EXPORT_SYMBOL_GPL(page_cache_readahead);
/*
* handle_ra_miss() is called when it is known that a page which should have
* been present in the pagecache (we just did some readahead there) was in fact
* not found. This will happen if it was evicted by the VM (readahead
* thrashing)
*
* Turn on the cache miss flag in the RA struct, this will cause the RA code
* to reduce the RA size on the next read.
*/
void handle_ra_miss(struct address_space *mapping,
struct file_ra_state *ra, pgoff_t offset)
{
ra->flags |= RA_FLAG_MISS;
ra->flags &= ~RA_FLAG_INCACHE;
ra->cache_hit = 0;
}
/*
* Given a desired number of PAGE_CACHE_SIZE readahead pages, return a
* sensible upper limit.
*/
unsigned long max_sane_readahead(unsigned long nr)
{
return min(nr, (node_page_state(numa_node_id(), NR_INACTIVE)
+ node_page_state(numa_node_id(), NR_FREE_PAGES)) / 2);
}