WSL2-Linux-Kernel/kernel/trace/blktrace.c

1929 строки
46 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2006 Jens Axboe <axboe@kernel.dk>
*
*/
blktrace: break out of blktrace setup on concurrent calls We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-05 17:58:36 +03:00
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/blktrace_api.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/mutex.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/export.h>
#include <linux/time.h>
#include <linux/uaccess.h>
#include <linux/list.h>
#include <linux/blk-cgroup.h>
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
#include "../../block/blk.h"
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
#include <trace/events/block.h>
#include "trace_output.h"
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
#ifdef CONFIG_BLK_DEV_IO_TRACE
static unsigned int blktrace_seq __read_mostly = 1;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static struct trace_array *blk_tr;
static bool blk_tracer_enabled __read_mostly;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static LIST_HEAD(running_trace_list);
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(running_trace_lock);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
/* Select an alternative, minimalistic output than the original one */
#define TRACE_BLK_OPT_CLASSIC 0x1
#define TRACE_BLK_OPT_CGROUP 0x2
#define TRACE_BLK_OPT_CGNAME 0x4
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static struct tracer_opt blk_tracer_opts[] = {
/* Default disable the minimalistic output */
{ TRACER_OPT(blk_classic, TRACE_BLK_OPT_CLASSIC) },
#ifdef CONFIG_BLK_CGROUP
{ TRACER_OPT(blk_cgroup, TRACE_BLK_OPT_CGROUP) },
{ TRACER_OPT(blk_cgname, TRACE_BLK_OPT_CGNAME) },
#endif
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{ }
};
static struct tracer_flags blk_tracer_flags = {
.val = 0,
.opts = blk_tracer_opts,
};
/* Global reference count of probes */
blktrace: fix unlocked registration of tracepoints We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-05 19:16:09 +03:00
static DEFINE_MUTEX(blk_probe_mutex);
static int blk_probes_ref;
static void blk_register_tracepoints(void);
static void blk_unregister_tracepoints(void);
/*
* Send out a notify message.
*/
static void trace_note(struct blk_trace *bt, pid_t pid, int action,
const void *data, size_t len, u64 cgid)
{
struct blk_io_trace *t;
struct ring_buffer_event *event = NULL;
struct trace_buffer *buffer = NULL;
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
unsigned int trace_ctx = 0;
int cpu = smp_processor_id();
bool blk_tracer = blk_tracer_enabled;
ssize_t cgid_len = cgid ? sizeof(cgid) : 0;
if (blk_tracer) {
buffer = blk_tr->array_buffer.buffer;
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
trace_ctx = tracing_gen_ctx_flags(0);
event = trace_buffer_lock_reserve(buffer, TRACE_BLK,
sizeof(*t) + len + cgid_len,
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
trace_ctx);
if (!event)
return;
t = ring_buffer_event_data(event);
goto record_it;
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
if (!bt->rchan)
return;
t = relay_reserve(bt->rchan, sizeof(*t) + len + cgid_len);
if (t) {
t->magic = BLK_IO_TRACE_MAGIC | BLK_IO_TRACE_VERSION;
t->time = ktime_to_ns(ktime_get());
record_it:
t->device = bt->dev;
t->action = action | (cgid ? __BLK_TN_CGROUP : 0);
t->pid = pid;
t->cpu = cpu;
t->pdu_len = len + cgid_len;
if (cgid_len)
memcpy((void *)t + sizeof(*t), &cgid, cgid_len);
memcpy((void *) t + sizeof(*t) + cgid_len, data, len);
if (blk_tracer)
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
trace_buffer_unlock_commit(blk_tr, buffer, event, trace_ctx);
}
}
/*
* Send out a notify for this process, if we haven't done so since a trace
* started
*/
static void trace_note_tsk(struct task_struct *tsk)
{
unsigned long flags;
struct blk_trace *bt;
tsk->btrace_seq = blktrace_seq;
spin_lock_irqsave(&running_trace_lock, flags);
list_for_each_entry(bt, &running_trace_list, running_list) {
trace_note(bt, tsk->pid, BLK_TN_PROCESS, tsk->comm,
sizeof(tsk->comm), 0);
}
spin_unlock_irqrestore(&running_trace_lock, flags);
}
static void trace_note_time(struct blk_trace *bt)
{
struct timespec64 now;
unsigned long flags;
u32 words[2];
/* need to check user space to see if this breaks in y2038 or y2106 */
ktime_get_real_ts64(&now);
words[0] = (u32)now.tv_sec;
words[1] = now.tv_nsec;
local_irq_save(flags);
trace_note(bt, 0, BLK_TN_TIMESTAMP, words, sizeof(words), 0);
local_irq_restore(flags);
}
void __trace_note_message(struct blk_trace *bt, struct blkcg *blkcg,
const char *fmt, ...)
{
int n;
va_list args;
unsigned long flags;
char *buf;
if (unlikely(bt->trace_state != Blktrace_running &&
!blk_tracer_enabled))
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return;
blktrace: Don't output messages if NOTIFY isn't set. Now if we enable blktrace, cfq has too many messages output to the trace buffer. It is fine if we don't specify any action mask. But if I do like this: blktrace /dev/sdb -a issue -a complete -o - | blkparse -i - I only want to see 'D' and 'C', while with the following command dd if=/mnt/ocfs2/test of=/dev/null bs=4k count=1 iflag=direct I will get(with a 2.6.37 vanilla kernel): 8,16 0 0 0.000000000 0 m N cfq3805 alloced 8,16 0 0 0.000004126 0 m N cfq3805 insert_request 8,16 0 0 0.000004884 0 m N cfq3805 add_to_rr 8,16 0 0 0.000008417 0 m N cfq workload slice:300 8,16 0 0 0.000009557 0 m N cfq3805 set_active wl_prio:0 wl_type:2 8,16 0 0 0.000010640 0 m N cfq3805 fifo= (null) 8,16 0 0 0.000011193 0 m N cfq3805 dispatch_insert 8,16 0 0 0.000012221 0 m N cfq3805 dispatched a request 8,16 0 0 0.000012802 0 m N cfq3805 activate rq, drv=1 8,16 0 1 0.000013181 3805 D R 114759 + 8 [dd] 8,16 0 2 0.000164244 0 C R 114759 + 8 [0] 8,16 0 0 0.000167997 0 m N cfq3805 complete rqnoidle 0 8,16 0 0 0.000168782 0 m N cfq3805 set_slice=100 8,16 0 0 0.000169874 0 m N cfq3805 arm_idle: 8 group_idle: 0 8,16 0 0 0.000170189 0 m N cfq schedule dispatch 8,16 0 0 0.000397938 0 m N cfq3805 slice expired t=0 8,16 0 0 0.000399763 0 m N cfq3805 sl_used=1 disp=1 charge=1 iops=0 sect=8 8,16 0 0 0.000400227 0 m N cfq3805 del_from_rr 8,16 0 0 0.000400882 0 m N cfq3805 put_queue See, there are 19 lines while I only need 2. I don't think it is appropriate for a user. So this patch will disable any messages if the BLK_TC_NOTIFY isn't set. Now the output for the same command will look like: 8,16 0 1 0.000000000 4908 D R 114759 + 8 [dd] 8,16 0 2 0.000146827 0 C R 114759 + 8 [0] Yes, it is what I want to see. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-01-19 05:51:44 +03:00
/*
* If the BLK_TC_NOTIFY action mask isn't set, don't send any note
* message to the trace.
*/
if (!(bt->act_mask & BLK_TC_NOTIFY))
return;
local_irq_save(flags);
buf = this_cpu_ptr(bt->msg_data);
va_start(args, fmt);
n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args);
va_end(args);
if (!(blk_tracer_flags.val & TRACE_BLK_OPT_CGROUP))
blkcg = NULL;
#ifdef CONFIG_BLK_CGROUP
trace_note(bt, current->pid, BLK_TN_MESSAGE, buf, n,
blkcg ? cgroup_id(blkcg->css.cgroup) : 1);
#else
trace_note(bt, current->pid, BLK_TN_MESSAGE, buf, n, 0);
#endif
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(__trace_note_message);
static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
pid_t pid)
{
if (((bt->act_mask << BLK_TC_SHIFT) & what) == 0)
return 1;
if (sector && (sector < bt->start_lba || sector > bt->end_lba))
return 1;
if (bt->pid && pid != bt->pid)
return 1;
return 0;
}
/*
* Data direction bit lookup
*/
static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ),
BLK_TC_ACT(BLK_TC_WRITE) };
#define BLK_TC_RAHEAD BLK_TC_AHEAD
#define BLK_TC_PREFLUSH BLK_TC_FLUSH
/* The ilog2() calls fall out because they're constant */
#define MASK_TC_BIT(rw, __name) ((rw & REQ_ ## __name) << \
(ilog2(BLK_TC_ ## __name) + BLK_TC_SHIFT - __REQ_ ## __name))
/*
* The worker for the various blk_add_trace*() types. Fills out a
* blk_io_trace structure and places it in a per-cpu subbuffer.
*/
static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
int op, int op_flags, u32 what, int error, int pdu_len,
void *pdu_data, u64 cgid)
{
struct task_struct *tsk = current;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
struct ring_buffer_event *event = NULL;
struct trace_buffer *buffer = NULL;
struct blk_io_trace *t;
unsigned long flags = 0;
unsigned long *sequence;
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
unsigned int trace_ctx = 0;
pid_t pid;
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
int cpu;
bool blk_tracer = blk_tracer_enabled;
ssize_t cgid_len = cgid ? sizeof(cgid) : 0;
if (unlikely(bt->trace_state != Blktrace_running && !blk_tracer))
return;
what |= ddir_act[op_is_write(op) ? WRITE : READ];
what |= MASK_TC_BIT(op_flags, SYNC);
what |= MASK_TC_BIT(op_flags, RAHEAD);
what |= MASK_TC_BIT(op_flags, META);
what |= MASK_TC_BIT(op_flags, PREFLUSH);
what |= MASK_TC_BIT(op_flags, FUA);
if (op == REQ_OP_DISCARD || op == REQ_OP_SECURE_ERASE)
what |= BLK_TC_ACT(BLK_TC_DISCARD);
if (op == REQ_OP_FLUSH)
what |= BLK_TC_ACT(BLK_TC_FLUSH);
if (cgid)
what |= __BLK_TA_CGROUP;
pid = tsk->pid;
if (act_log_check(bt, what, sector, pid))
return;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
cpu = raw_smp_processor_id();
if (blk_tracer) {
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
tracing_record_cmdline(current);
buffer = blk_tr->array_buffer.buffer;
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
trace_ctx = tracing_gen_ctx_flags(0);
event = trace_buffer_lock_reserve(buffer, TRACE_BLK,
sizeof(*t) + pdu_len + cgid_len,
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
trace_ctx);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
if (!event)
return;
t = ring_buffer_event_data(event);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
goto record_it;
}
if (unlikely(tsk->btrace_seq != blktrace_seq))
trace_note_tsk(tsk);
/*
* A word about the locking here - we disable interrupts to reserve
* some space in the relay per-cpu buffer, to prevent an irq
* from coming in and stepping on our toes.
*/
local_irq_save(flags);
t = relay_reserve(bt->rchan, sizeof(*t) + pdu_len + cgid_len);
if (t) {
sequence = per_cpu_ptr(bt->sequence, cpu);
t->magic = BLK_IO_TRACE_MAGIC | BLK_IO_TRACE_VERSION;
t->sequence = ++(*sequence);
t->time = ktime_to_ns(ktime_get());
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
record_it:
/*
* These two are not needed in ftrace as they are in the
* generic trace_entry, filled by tracing_generic_entry_update,
* but for the trace_event->bin() synthesizer benefit we do it
* here too.
*/
t->cpu = cpu;
t->pid = pid;
t->sector = sector;
t->bytes = bytes;
t->action = what;
t->device = bt->dev;
t->error = error;
t->pdu_len = pdu_len + cgid_len;
if (cgid_len)
memcpy((void *)t + sizeof(*t), &cgid, cgid_len);
if (pdu_len)
memcpy((void *)t + sizeof(*t) + cgid_len, pdu_data, pdu_len);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
if (blk_tracer) {
tracing: Merge irqflags + preempt counter. The state of the interrupts (irqflags) and the preemption counter are both passed down to tracing_generic_entry_update(). Only one bit of irqflags is actually required: The on/off state. The complete 32bit of the preemption counter isn't needed. Just whether of the upper bits (softirq, hardirq and NMI) are set and the preemption depth is needed. The irqflags and the preemption counter could be evaluated early and the information stored in an integer `trace_ctx'. tracing_generic_entry_update() would use the upper bits as the TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth (considering that one must be substracted from the counter in one special cases). The actual preemption value is not used except for the tracing record. The `irqflags' variable is mostly used only for the tracing record. An exception here is for instance wakeup_tracer_call() or probe_wakeup_sched_switch() which explicilty disable interrupts and use that `irqflags' to save (and restore) the IRQ state and to record the state. Struct trace_event_buffer has also the `pc' and flags' members which can be replaced with `trace_ctx' since their actual value is not used outside of trace recording. This will reduce tracing_generic_entry_update() to simply assign values to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved to _tracing_gen_ctx_flags() which replaces preempt_count() and local_save_flags() invocations. As an example, ftrace_syscall_enter() may invoke: - trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update() - event_trigger_unlock_commit() -> ftrace_trace_stack() -> … -> tracing_generic_entry_update() -> ftrace_trace_userstack() -> … -> tracing_generic_entry_update() In this case the TRACE_FLAG_* bits were evaluated three times. By using the `trace_ctx' they are evaluated once and assigned three times. A build with all tracers enabled on x86-64 with and without the patch: text data bss dec hex filename 21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old 21970293 17084168 7639260 46693721 2c87d59 vmlinux.new text shrank by 379 bytes, data remained constant. Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-25 22:45:08 +03:00
trace_buffer_unlock_commit(blk_tr, buffer, event, trace_ctx);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return;
}
}
local_irq_restore(flags);
}
static void blk_trace_free(struct blk_trace *bt)
{
relay_close(bt->rchan);
debugfs_remove(bt->dir);
free_percpu(bt->sequence);
free_percpu(bt->msg_data);
kfree(bt);
}
blktrace: fix unlocked registration of tracepoints We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-05 19:16:09 +03:00
static void get_probe_ref(void)
{
mutex_lock(&blk_probe_mutex);
if (++blk_probes_ref == 1)
blk_register_tracepoints();
mutex_unlock(&blk_probe_mutex);
}
static void put_probe_ref(void)
{
mutex_lock(&blk_probe_mutex);
if (!--blk_probes_ref)
blk_unregister_tracepoints();
mutex_unlock(&blk_probe_mutex);
}
static void blk_trace_cleanup(struct blk_trace *bt)
{
synchronize_rcu();
blk_trace_free(bt);
blktrace: fix unlocked registration of tracepoints We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-05 19:16:09 +03:00
put_probe_ref();
}
static int __blk_trace_remove(struct request_queue *q)
{
struct blk_trace *bt;
bt = rcu_replace_pointer(q->blk_trace, NULL,
lockdep_is_held(&q->debugfs_mutex));
if (!bt)
return -EINVAL;
if (bt->trace_state != Blktrace_running)
blk_trace_cleanup(bt);
return 0;
}
int blk_trace_remove(struct request_queue *q)
{
int ret;
mutex_lock(&q->debugfs_mutex);
ret = __blk_trace_remove(q);
mutex_unlock(&q->debugfs_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(blk_trace_remove);
static ssize_t blk_dropped_read(struct file *filp, char __user *buffer,
size_t count, loff_t *ppos)
{
struct blk_trace *bt = filp->private_data;
char buf[16];
snprintf(buf, sizeof(buf), "%u\n", atomic_read(&bt->dropped));
return simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf));
}
static const struct file_operations blk_dropped_fops = {
.owner = THIS_MODULE,
.open = simple_open,
.read = blk_dropped_read,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 20:52:59 +04:00
.llseek = default_llseek,
};
static ssize_t blk_msg_write(struct file *filp, const char __user *buffer,
size_t count, loff_t *ppos)
{
char *msg;
struct blk_trace *bt;
if (count >= BLK_TN_MAX_MSG)
return -EINVAL;
msg = memdup_user_nul(buffer, count);
if (IS_ERR(msg))
return PTR_ERR(msg);
bt = filp->private_data;
__trace_note_message(bt, NULL, "%s", msg);
kfree(msg);
return count;
}
static const struct file_operations blk_msg_fops = {
.owner = THIS_MODULE,
.open = simple_open,
.write = blk_msg_write,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 20:52:59 +04:00
.llseek = noop_llseek,
};
/*
* Keep track of how many times we encountered a full subbuffer, to aid
* the user space app in telling how many lost events there were.
*/
static int blk_subbuf_start_callback(struct rchan_buf *buf, void *subbuf,
void *prev_subbuf, size_t prev_padding)
{
struct blk_trace *bt;
if (!relay_buf_full(buf))
return 1;
bt = buf->chan->private_data;
atomic_inc(&bt->dropped);
return 0;
}
static int blk_remove_buf_file_callback(struct dentry *dentry)
{
debugfs_remove(dentry);
return 0;
}
static struct dentry *blk_create_buf_file_callback(const char *filename,
struct dentry *parent,
umode_t mode,
struct rchan_buf *buf,
int *is_global)
{
return debugfs_create_file(filename, mode, parent, buf,
&relay_file_operations);
}
static const struct rchan_callbacks blk_relay_callbacks = {
.subbuf_start = blk_subbuf_start_callback,
.create_buf_file = blk_create_buf_file_callback,
.remove_buf_file = blk_remove_buf_file_callback,
};
static void blk_trace_setup_lba(struct blk_trace *bt,
struct block_device *bdev)
{
if (bdev) {
bt->start_lba = bdev->bd_start_sect;
bt->end_lba = bdev->bd_start_sect + bdev_nr_sectors(bdev);
} else {
bt->start_lba = 0;
bt->end_lba = -1ULL;
}
}
/*
* Setup everything required to start tracing
*/
static int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
struct block_device *bdev,
struct blk_user_trace_setup *buts)
{
struct blk_trace *bt = NULL;
struct dentry *dir = NULL;
int ret;
lockdep_assert_held(&q->debugfs_mutex);
if (!buts->buf_size || !buts->buf_nr)
return -EINVAL;
strncpy(buts->name, name, BLKTRACE_BDEV_SIZE);
buts->name[BLKTRACE_BDEV_SIZE - 1] = '\0';
/*
* some device names have larger paths - convert the slashes
* to underscores for this to work as expected
*/
strreplace(buts->name, '/', '_');
blktrace: break out of blktrace setup on concurrent calls We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-05 17:58:36 +03:00
/*
* bdev can be NULL, as with scsi-generic, this is a helpful as
* we can be.
*/
if (rcu_dereference_protected(q->blk_trace,
lockdep_is_held(&q->debugfs_mutex))) {
blktrace: break out of blktrace setup on concurrent calls We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-05 17:58:36 +03:00
pr_warn("Concurrent blktraces are not allowed on %s\n",
buts->name);
return -EBUSY;
}
bt = kzalloc(sizeof(*bt), GFP_KERNEL);
if (!bt)
return -ENOMEM;
ret = -ENOMEM;
bt->sequence = alloc_percpu(unsigned long);
if (!bt->sequence)
goto err;
bt->msg_data = __alloc_percpu(BLK_TN_MAX_MSG, __alignof__(char));
if (!bt->msg_data)
goto err;
blktrace: fix debugfs use after free On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory") merged on v4.12 Omar fixed the original blktrace code for request-based drivers (multiqueue). This however left in place a possible crash, if you happen to abuse blktrace while racing to remove / add a device. We used to use asynchronous removal of the request_queue, and with that the issue was easier to reproduce. Now that we have reverted to synchronous removal of the request_queue, the issue is still possible to reproduce, its however just a bit more difficult. We essentially run two instances of break-blktrace which add/remove a loop device, and setup a blktrace and just never tear the blktrace down. We do this twice in parallel. This is easily reproduced with the script run_0004.sh from break-blktrace [0]. We can end up with two types of panics each reflecting where we race, one a failed blktrace setup: [ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present! [ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 252.436592] #PF: supervisor write access in kernel mode [ 252.439822] #PF: error_code(0x0002) - not-present page [ 252.442967] PGD 0 P4D 0 [ 252.444656] Oops: 0002 [#1] SMP NOPTI [ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 252.456343] RIP: 0010:down_write+0x15/0x40 [ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246 [ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000 [ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001 [ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000 [ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0 [ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000 [ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0 [ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 252.479866] Call Trace: [ 252.480322] simple_recursive_removal+0x4e/0x2e0 [ 252.481078] ? debugfs_remove+0x60/0x60 [ 252.481725] ? relay_destroy_buf+0x77/0xb0 [ 252.482662] debugfs_remove+0x40/0x60 [ 252.483518] blk_remove_buf_file_callback+0x5/0x10 [ 252.484328] relay_close_buf+0x2e/0x60 [ 252.484930] relay_open+0x1ce/0x2c0 [ 252.485520] do_blk_trace_setup+0x14f/0x2b0 [ 252.486187] __blk_trace_setup+0x54/0xb0 [ 252.486803] blk_trace_ioctl+0x90/0x140 [ 252.487423] ? do_sys_openat2+0x1ab/0x2d0 [ 252.488053] blkdev_ioctl+0x4d/0x260 [ 252.488636] block_ioctl+0x39/0x40 [ 252.489139] ksys_ioctl+0x87/0xc0 [ 252.489675] __x64_sys_ioctl+0x16/0x20 [ 252.490380] do_syscall_64+0x52/0x180 [ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9 And the other on the device removal: [ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present! [ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 128.619537] #PF: supervisor write access in kernel mode [ 128.622700] #PF: error_code(0x0002) - not-present page [ 128.625842] PGD 0 P4D 0 [ 128.627585] Oops: 0002 [#1] SMP NOPTI [ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 128.640471] RIP: 0010:down_write+0x15/0x40 [ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246 [ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000 [ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0 [ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000 [ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0 [ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000 [ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0 [ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.667282] Call Trace: [ 128.667801] simple_recursive_removal+0x4e/0x2e0 [ 128.668663] ? debugfs_remove+0x60/0x60 [ 128.669368] debugfs_remove+0x40/0x60 [ 128.669985] blk_trace_free+0xd/0x50 [ 128.670593] __blk_trace_remove+0x27/0x40 [ 128.671274] blk_trace_shutdown+0x30/0x40 [ 128.671935] blk_release_queue+0x95/0xf0 [ 128.672589] kobject_put+0xa5/0x1b0 [ 128.673188] disk_release+0xa2/0xc0 [ 128.673786] device_release+0x28/0x80 [ 128.674376] kobject_put+0xa5/0x1b0 [ 128.674915] loop_remove+0x39/0x50 [loop] [ 128.675511] loop_control_ioctl+0x113/0x130 [loop] [ 128.676199] ksys_ioctl+0x87/0xc0 [ 128.676708] __x64_sys_ioctl+0x16/0x20 [ 128.677274] do_syscall_64+0x52/0x180 [ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The common theme here is: debugfs: Directory 'loop0' with parent 'block' already present This crash happens because of how blktrace uses the debugfs directory where it places its files. Upon init we always create the same directory which would be needed by blktrace but we only do this for make_request drivers (multiqueue) block drivers. When you race a removal of these devices with a blktrace setup you end up in a situation where the make_request recursive debugfs removal will sweep away the blktrace files and then later blktrace will also try to remove individual dentries which are already NULL. The inverse is also possible and hence the two types of use after frees. We don't create the block debugfs directory on init for these types of block devices: * request-based block driver block devices * every possible partition * scsi-generic And so, this race should in theory only be possible with make_request drivers. We can fix the UAF by simply re-using the debugfs directory for make_request drivers (multiqueue) and only creating the ephemeral directory for the other type of block devices. The new clarifications on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace *prior* to processing a blktrace ensures the debugfs directories are only created if no possible directory name clashes are possible. This goes tested with: o nvme partitions o ISCSI with tgt, and blktracing against scsi-generic with: o block o tape o cdrom o media changer o blktests This patch is part of the work which disputes the severity of CVE-2019-19770 which shows this issue is not a core debugfs issue, but a misuse of debugfs within blktace. Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory") Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: yu kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-19 23:47:28 +03:00
/*
* When tracing the whole disk reuse the existing debugfs directory
* created by the block layer on init. For partitions block devices,
blktrace: fix debugfs use after free On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory") merged on v4.12 Omar fixed the original blktrace code for request-based drivers (multiqueue). This however left in place a possible crash, if you happen to abuse blktrace while racing to remove / add a device. We used to use asynchronous removal of the request_queue, and with that the issue was easier to reproduce. Now that we have reverted to synchronous removal of the request_queue, the issue is still possible to reproduce, its however just a bit more difficult. We essentially run two instances of break-blktrace which add/remove a loop device, and setup a blktrace and just never tear the blktrace down. We do this twice in parallel. This is easily reproduced with the script run_0004.sh from break-blktrace [0]. We can end up with two types of panics each reflecting where we race, one a failed blktrace setup: [ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present! [ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 252.436592] #PF: supervisor write access in kernel mode [ 252.439822] #PF: error_code(0x0002) - not-present page [ 252.442967] PGD 0 P4D 0 [ 252.444656] Oops: 0002 [#1] SMP NOPTI [ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 252.456343] RIP: 0010:down_write+0x15/0x40 [ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246 [ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000 [ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001 [ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000 [ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0 [ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000 [ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0 [ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 252.479866] Call Trace: [ 252.480322] simple_recursive_removal+0x4e/0x2e0 [ 252.481078] ? debugfs_remove+0x60/0x60 [ 252.481725] ? relay_destroy_buf+0x77/0xb0 [ 252.482662] debugfs_remove+0x40/0x60 [ 252.483518] blk_remove_buf_file_callback+0x5/0x10 [ 252.484328] relay_close_buf+0x2e/0x60 [ 252.484930] relay_open+0x1ce/0x2c0 [ 252.485520] do_blk_trace_setup+0x14f/0x2b0 [ 252.486187] __blk_trace_setup+0x54/0xb0 [ 252.486803] blk_trace_ioctl+0x90/0x140 [ 252.487423] ? do_sys_openat2+0x1ab/0x2d0 [ 252.488053] blkdev_ioctl+0x4d/0x260 [ 252.488636] block_ioctl+0x39/0x40 [ 252.489139] ksys_ioctl+0x87/0xc0 [ 252.489675] __x64_sys_ioctl+0x16/0x20 [ 252.490380] do_syscall_64+0x52/0x180 [ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9 And the other on the device removal: [ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present! [ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 128.619537] #PF: supervisor write access in kernel mode [ 128.622700] #PF: error_code(0x0002) - not-present page [ 128.625842] PGD 0 P4D 0 [ 128.627585] Oops: 0002 [#1] SMP NOPTI [ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 128.640471] RIP: 0010:down_write+0x15/0x40 [ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246 [ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000 [ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0 [ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000 [ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0 [ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000 [ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0 [ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.667282] Call Trace: [ 128.667801] simple_recursive_removal+0x4e/0x2e0 [ 128.668663] ? debugfs_remove+0x60/0x60 [ 128.669368] debugfs_remove+0x40/0x60 [ 128.669985] blk_trace_free+0xd/0x50 [ 128.670593] __blk_trace_remove+0x27/0x40 [ 128.671274] blk_trace_shutdown+0x30/0x40 [ 128.671935] blk_release_queue+0x95/0xf0 [ 128.672589] kobject_put+0xa5/0x1b0 [ 128.673188] disk_release+0xa2/0xc0 [ 128.673786] device_release+0x28/0x80 [ 128.674376] kobject_put+0xa5/0x1b0 [ 128.674915] loop_remove+0x39/0x50 [loop] [ 128.675511] loop_control_ioctl+0x113/0x130 [loop] [ 128.676199] ksys_ioctl+0x87/0xc0 [ 128.676708] __x64_sys_ioctl+0x16/0x20 [ 128.677274] do_syscall_64+0x52/0x180 [ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The common theme here is: debugfs: Directory 'loop0' with parent 'block' already present This crash happens because of how blktrace uses the debugfs directory where it places its files. Upon init we always create the same directory which would be needed by blktrace but we only do this for make_request drivers (multiqueue) block drivers. When you race a removal of these devices with a blktrace setup you end up in a situation where the make_request recursive debugfs removal will sweep away the blktrace files and then later blktrace will also try to remove individual dentries which are already NULL. The inverse is also possible and hence the two types of use after frees. We don't create the block debugfs directory on init for these types of block devices: * request-based block driver block devices * every possible partition * scsi-generic And so, this race should in theory only be possible with make_request drivers. We can fix the UAF by simply re-using the debugfs directory for make_request drivers (multiqueue) and only creating the ephemeral directory for the other type of block devices. The new clarifications on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace *prior* to processing a blktrace ensures the debugfs directories are only created if no possible directory name clashes are possible. This goes tested with: o nvme partitions o ISCSI with tgt, and blktracing against scsi-generic with: o block o tape o cdrom o media changer o blktests This patch is part of the work which disputes the severity of CVE-2019-19770 which shows this issue is not a core debugfs issue, but a misuse of debugfs within blktace. Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory") Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: yu kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-19 23:47:28 +03:00
* and scsi-generic block devices we create a temporary new debugfs
* directory that will be removed once the trace ends.
*/
if (bdev && !bdev_is_partition(bdev))
blktrace: fix debugfs use after free On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory") merged on v4.12 Omar fixed the original blktrace code for request-based drivers (multiqueue). This however left in place a possible crash, if you happen to abuse blktrace while racing to remove / add a device. We used to use asynchronous removal of the request_queue, and with that the issue was easier to reproduce. Now that we have reverted to synchronous removal of the request_queue, the issue is still possible to reproduce, its however just a bit more difficult. We essentially run two instances of break-blktrace which add/remove a loop device, and setup a blktrace and just never tear the blktrace down. We do this twice in parallel. This is easily reproduced with the script run_0004.sh from break-blktrace [0]. We can end up with two types of panics each reflecting where we race, one a failed blktrace setup: [ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present! [ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 252.436592] #PF: supervisor write access in kernel mode [ 252.439822] #PF: error_code(0x0002) - not-present page [ 252.442967] PGD 0 P4D 0 [ 252.444656] Oops: 0002 [#1] SMP NOPTI [ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 252.456343] RIP: 0010:down_write+0x15/0x40 [ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246 [ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000 [ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001 [ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000 [ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0 [ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000 [ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0 [ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 252.479866] Call Trace: [ 252.480322] simple_recursive_removal+0x4e/0x2e0 [ 252.481078] ? debugfs_remove+0x60/0x60 [ 252.481725] ? relay_destroy_buf+0x77/0xb0 [ 252.482662] debugfs_remove+0x40/0x60 [ 252.483518] blk_remove_buf_file_callback+0x5/0x10 [ 252.484328] relay_close_buf+0x2e/0x60 [ 252.484930] relay_open+0x1ce/0x2c0 [ 252.485520] do_blk_trace_setup+0x14f/0x2b0 [ 252.486187] __blk_trace_setup+0x54/0xb0 [ 252.486803] blk_trace_ioctl+0x90/0x140 [ 252.487423] ? do_sys_openat2+0x1ab/0x2d0 [ 252.488053] blkdev_ioctl+0x4d/0x260 [ 252.488636] block_ioctl+0x39/0x40 [ 252.489139] ksys_ioctl+0x87/0xc0 [ 252.489675] __x64_sys_ioctl+0x16/0x20 [ 252.490380] do_syscall_64+0x52/0x180 [ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9 And the other on the device removal: [ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present! [ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0 [ 128.619537] #PF: supervisor write access in kernel mode [ 128.622700] #PF: error_code(0x0002) - not-present page [ 128.625842] PGD 0 P4D 0 [ 128.627585] Oops: 0002 [#1] SMP NOPTI [ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164 [ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 [ 128.640471] RIP: 0010:down_write+0x15/0x40 [ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 45 08 5d [ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246 [ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000 [ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0 [ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0 [ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000 [ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0 [ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000 [ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0 [ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.667282] Call Trace: [ 128.667801] simple_recursive_removal+0x4e/0x2e0 [ 128.668663] ? debugfs_remove+0x60/0x60 [ 128.669368] debugfs_remove+0x40/0x60 [ 128.669985] blk_trace_free+0xd/0x50 [ 128.670593] __blk_trace_remove+0x27/0x40 [ 128.671274] blk_trace_shutdown+0x30/0x40 [ 128.671935] blk_release_queue+0x95/0xf0 [ 128.672589] kobject_put+0xa5/0x1b0 [ 128.673188] disk_release+0xa2/0xc0 [ 128.673786] device_release+0x28/0x80 [ 128.674376] kobject_put+0xa5/0x1b0 [ 128.674915] loop_remove+0x39/0x50 [loop] [ 128.675511] loop_control_ioctl+0x113/0x130 [loop] [ 128.676199] ksys_ioctl+0x87/0xc0 [ 128.676708] __x64_sys_ioctl+0x16/0x20 [ 128.677274] do_syscall_64+0x52/0x180 [ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The common theme here is: debugfs: Directory 'loop0' with parent 'block' already present This crash happens because of how blktrace uses the debugfs directory where it places its files. Upon init we always create the same directory which would be needed by blktrace but we only do this for make_request drivers (multiqueue) block drivers. When you race a removal of these devices with a blktrace setup you end up in a situation where the make_request recursive debugfs removal will sweep away the blktrace files and then later blktrace will also try to remove individual dentries which are already NULL. The inverse is also possible and hence the two types of use after frees. We don't create the block debugfs directory on init for these types of block devices: * request-based block driver block devices * every possible partition * scsi-generic And so, this race should in theory only be possible with make_request drivers. We can fix the UAF by simply re-using the debugfs directory for make_request drivers (multiqueue) and only creating the ephemeral directory for the other type of block devices. The new clarifications on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace *prior* to processing a blktrace ensures the debugfs directories are only created if no possible directory name clashes are possible. This goes tested with: o nvme partitions o ISCSI with tgt, and blktracing against scsi-generic with: o block o tape o cdrom o media changer o blktests This patch is part of the work which disputes the severity of CVE-2019-19770 which shows this issue is not a core debugfs issue, but a misuse of debugfs within blktace. Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory") Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: yu kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-19 23:47:28 +03:00
dir = q->debugfs_dir;
else
bt->dir = dir = debugfs_create_dir(buts->name, blk_debugfs_root);
/*
* As blktrace relies on debugfs for its interface the debugfs directory
* is required, contrary to the usual mantra of not checking for debugfs
* files or directories.
*/
if (IS_ERR_OR_NULL(dir)) {
pr_warn("debugfs_dir not present for %s so skipping\n",
buts->name);
ret = -ENOENT;
goto err;
}
bt->dev = dev;
atomic_set(&bt->dropped, 0);
INIT_LIST_HEAD(&bt->running_list);
ret = -EIO;
debugfs_create_file("dropped", 0444, dir, bt, &blk_dropped_fops);
debugfs_create_file("msg", 0222, dir, bt, &blk_msg_fops);
bt->rchan = relay_open("trace", dir, buts->buf_size,
buts->buf_nr, &blk_relay_callbacks, bt);
if (!bt->rchan)
goto err;
bt->act_mask = buts->act_mask;
if (!bt->act_mask)
bt->act_mask = (u16) -1;
blk_trace_setup_lba(bt, bdev);
/* overwrite with user settings */
if (buts->start_lba)
bt->start_lba = buts->start_lba;
if (buts->end_lba)
bt->end_lba = buts->end_lba;
bt->pid = buts->pid;
bt->trace_state = Blktrace_setup;
rcu_assign_pointer(q->blk_trace, bt);
blktrace: fix unlocked registration of tracepoints We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-05 19:16:09 +03:00
get_probe_ref();
ret = 0;
err:
if (ret)
blk_trace_free(bt);
return ret;
}
static int __blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
struct block_device *bdev, char __user *arg)
{
struct blk_user_trace_setup buts;
int ret;
ret = copy_from_user(&buts, arg, sizeof(buts));
if (ret)
return -EFAULT;
ret = do_blk_trace_setup(q, name, dev, bdev, &buts);
if (ret)
return ret;
if (copy_to_user(arg, &buts, sizeof(buts))) {
__blk_trace_remove(q);
return -EFAULT;
}
return 0;
}
int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
struct block_device *bdev,
char __user *arg)
{
int ret;
mutex_lock(&q->debugfs_mutex);
ret = __blk_trace_setup(q, name, dev, bdev, arg);
mutex_unlock(&q->debugfs_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(blk_trace_setup);
#if defined(CONFIG_COMPAT) && defined(CONFIG_X86_64)
static int compat_blk_trace_setup(struct request_queue *q, char *name,
dev_t dev, struct block_device *bdev,
char __user *arg)
{
struct blk_user_trace_setup buts;
struct compat_blk_user_trace_setup cbuts;
int ret;
if (copy_from_user(&cbuts, arg, sizeof(cbuts)))
return -EFAULT;
buts = (struct blk_user_trace_setup) {
.act_mask = cbuts.act_mask,
.buf_size = cbuts.buf_size,
.buf_nr = cbuts.buf_nr,
.start_lba = cbuts.start_lba,
.end_lba = cbuts.end_lba,
.pid = cbuts.pid,
};
ret = do_blk_trace_setup(q, name, dev, bdev, &buts);
if (ret)
return ret;
if (copy_to_user(arg, &buts.name, ARRAY_SIZE(buts.name))) {
__blk_trace_remove(q);
return -EFAULT;
}
return 0;
}
#endif
static int __blk_trace_startstop(struct request_queue *q, int start)
{
int ret;
struct blk_trace *bt;
bt = rcu_dereference_protected(q->blk_trace,
lockdep_is_held(&q->debugfs_mutex));
if (bt == NULL)
return -EINVAL;
/*
* For starting a trace, we can transition from a setup or stopped
* trace. For stopping a trace, the state must be running
*/
ret = -EINVAL;
if (start) {
if (bt->trace_state == Blktrace_setup ||
bt->trace_state == Blktrace_stopped) {
blktrace_seq++;
smp_mb();
bt->trace_state = Blktrace_running;
spin_lock_irq(&running_trace_lock);
list_add(&bt->running_list, &running_trace_list);
spin_unlock_irq(&running_trace_lock);
trace_note_time(bt);
ret = 0;
}
} else {
if (bt->trace_state == Blktrace_running) {
bt->trace_state = Blktrace_stopped;
spin_lock_irq(&running_trace_lock);
list_del_init(&bt->running_list);
spin_unlock_irq(&running_trace_lock);
relay_flush(bt->rchan);
ret = 0;
}
}
return ret;
}
int blk_trace_startstop(struct request_queue *q, int start)
{
int ret;
mutex_lock(&q->debugfs_mutex);
ret = __blk_trace_startstop(q, start);
mutex_unlock(&q->debugfs_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(blk_trace_startstop);
/*
* When reading or writing the blktrace sysfs files, the references to the
* opened sysfs or device files should prevent the underlying block device
* from being removed. So no further delete protection is really needed.
*/
/**
* blk_trace_ioctl: - handle the ioctls associated with tracing
* @bdev: the block device
* @cmd: the ioctl cmd
* @arg: the argument data, if any
*
**/
int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
{
struct request_queue *q;
int ret, start = 0;
char b[BDEVNAME_SIZE];
q = bdev_get_queue(bdev);
if (!q)
return -ENXIO;
mutex_lock(&q->debugfs_mutex);
switch (cmd) {
case BLKTRACESETUP:
bdevname(bdev, b);
ret = __blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
break;
#if defined(CONFIG_COMPAT) && defined(CONFIG_X86_64)
case BLKTRACESETUP32:
bdevname(bdev, b);
ret = compat_blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
break;
#endif
case BLKTRACESTART:
start = 1;
fallthrough;
case BLKTRACESTOP:
ret = __blk_trace_startstop(q, start);
break;
case BLKTRACETEARDOWN:
ret = __blk_trace_remove(q);
break;
default:
ret = -ENOTTY;
break;
}
mutex_unlock(&q->debugfs_mutex);
return ret;
}
/**
* blk_trace_shutdown: - stop and cleanup trace structures
* @q: the request queue associated with the device
*
**/
void blk_trace_shutdown(struct request_queue *q)
{
mutex_lock(&q->debugfs_mutex);
if (rcu_dereference_protected(q->blk_trace,
lockdep_is_held(&q->debugfs_mutex))) {
__blk_trace_startstop(q, 0);
__blk_trace_remove(q);
}
mutex_unlock(&q->debugfs_mutex);
}
#ifdef CONFIG_BLK_CGROUP
static u64 blk_trace_bio_get_cgid(struct request_queue *q, struct bio *bio)
{
struct blk_trace *bt;
/* We don't use the 'bt' value here except as an optimization... */
bt = rcu_dereference_protected(q->blk_trace, 1);
if (!bt || !(blk_tracer_flags.val & TRACE_BLK_OPT_CGROUP))
return 0;
if (!bio->bi_blkg)
return 0;
return cgroup_id(bio_blkcg(bio)->css.cgroup);
}
#else
static u64 blk_trace_bio_get_cgid(struct request_queue *q, struct bio *bio)
{
return 0;
}
#endif
static u64
blk_trace_request_get_cgid(struct request *rq)
{
if (!rq->bio)
return 0;
/* Use the first bio */
return blk_trace_bio_get_cgid(rq->q, rq->bio);
}
/*
* blktrace probes
*/
/**
* blk_add_trace_rq - Add a trace for a request oriented action
* @rq: the source request
* @error: return status to log
* @nr_bytes: number of completed bytes
* @what: the action
* @cgid: the cgroup info
*
* Description:
* Records an action against a request. Will log the bio offset + size.
*
**/
static void blk_add_trace_rq(struct request *rq, int error,
unsigned int nr_bytes, u32 what, u64 cgid)
{
struct blk_trace *bt;
rcu_read_lock();
bt = rcu_dereference(rq->q->blk_trace);
if (likely(!bt)) {
rcu_read_unlock();
return;
}
if (blk_rq_is_passthrough(rq))
what |= BLK_TC_ACT(BLK_TC_PC);
else
what |= BLK_TC_ACT(BLK_TC_FS);
__blk_add_trace(bt, blk_rq_trace_sector(rq), nr_bytes, req_op(rq),
rq->cmd_flags, what, error, 0, NULL, cgid);
rcu_read_unlock();
}
static void blk_add_trace_rq_insert(void *ignore, struct request *rq)
{
blk_add_trace_rq(rq, 0, blk_rq_bytes(rq), BLK_TA_INSERT,
blk_trace_request_get_cgid(rq));
}
static void blk_add_trace_rq_issue(void *ignore, struct request *rq)
{
blk_add_trace_rq(rq, 0, blk_rq_bytes(rq), BLK_TA_ISSUE,
blk_trace_request_get_cgid(rq));
}
static void blk_add_trace_rq_merge(void *ignore, struct request *rq)
{
blk_add_trace_rq(rq, 0, blk_rq_bytes(rq), BLK_TA_BACKMERGE,
blk_trace_request_get_cgid(rq));
}
static void blk_add_trace_rq_requeue(void *ignore, struct request *rq)
{
blk_add_trace_rq(rq, 0, blk_rq_bytes(rq), BLK_TA_REQUEUE,
blk_trace_request_get_cgid(rq));
}
static void blk_add_trace_rq_complete(void *ignore, struct request *rq,
int error, unsigned int nr_bytes)
{
blk_add_trace_rq(rq, error, nr_bytes, BLK_TA_COMPLETE,
blk_trace_request_get_cgid(rq));
}
/**
* blk_add_trace_bio - Add a trace for a bio oriented action
* @q: queue the io is for
* @bio: the source bio
* @what: the action
* @error: error, if any
*
* Description:
* Records an action against a bio. Will log the bio offset + size.
*
**/
static void blk_add_trace_bio(struct request_queue *q, struct bio *bio,
u32 what, int error)
{
struct blk_trace *bt;
rcu_read_lock();
bt = rcu_dereference(q->blk_trace);
if (likely(!bt)) {
rcu_read_unlock();
return;
}
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 02:44:27 +04:00
__blk_add_trace(bt, bio->bi_iter.bi_sector, bio->bi_iter.bi_size,
bio_op(bio), bio->bi_opf, what, error, 0, NULL,
blk_trace_bio_get_cgid(q, bio));
rcu_read_unlock();
}
static void blk_add_trace_bio_bounce(void *ignore, struct bio *bio)
{
blk_add_trace_bio(bio->bi_bdev->bd_disk->queue, bio, BLK_TA_BOUNCE, 0);
}
static void blk_add_trace_bio_complete(void *ignore,
struct request_queue *q, struct bio *bio)
{
blk_add_trace_bio(q, bio, BLK_TA_COMPLETE,
blk_status_to_errno(bio->bi_status));
}
static void blk_add_trace_bio_backmerge(void *ignore, struct bio *bio)
{
blk_add_trace_bio(bio->bi_bdev->bd_disk->queue, bio, BLK_TA_BACKMERGE,
0);
}
static void blk_add_trace_bio_frontmerge(void *ignore, struct bio *bio)
{
blk_add_trace_bio(bio->bi_bdev->bd_disk->queue, bio, BLK_TA_FRONTMERGE,
0);
}
static void blk_add_trace_bio_queue(void *ignore, struct bio *bio)
{
blk_add_trace_bio(bio->bi_bdev->bd_disk->queue, bio, BLK_TA_QUEUE, 0);
}
static void blk_add_trace_getrq(void *ignore, struct bio *bio)
{
blk_add_trace_bio(bio->bi_bdev->bd_disk->queue, bio, BLK_TA_GETRQ, 0);
}
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
static void blk_add_trace_plug(void *ignore, struct request_queue *q)
{
struct blk_trace *bt;
rcu_read_lock();
bt = rcu_dereference(q->blk_trace);
if (bt)
__blk_add_trace(bt, 0, 0, 0, 0, BLK_TA_PLUG, 0, 0, NULL, 0);
rcu_read_unlock();
}
static void blk_add_trace_unplug(void *ignore, struct request_queue *q,
unsigned int depth, bool explicit)
{
struct blk_trace *bt;
rcu_read_lock();
bt = rcu_dereference(q->blk_trace);
if (bt) {
__be64 rpdu = cpu_to_be64(depth);
u32 what;
if (explicit)
what = BLK_TA_UNPLUG_IO;
else
what = BLK_TA_UNPLUG_TIMER;
__blk_add_trace(bt, 0, 0, 0, 0, what, 0, sizeof(rpdu), &rpdu, 0);
}
rcu_read_unlock();
}
static void blk_add_trace_split(void *ignore, struct bio *bio, unsigned int pdu)
{
struct request_queue *q = bio->bi_bdev->bd_disk->queue;
struct blk_trace *bt;
rcu_read_lock();
bt = rcu_dereference(q->blk_trace);
if (bt) {
__be64 rpdu = cpu_to_be64(pdu);
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 02:44:27 +04:00
__blk_add_trace(bt, bio->bi_iter.bi_sector,
bio->bi_iter.bi_size, bio_op(bio), bio->bi_opf,
BLK_TA_SPLIT,
blk_status_to_errno(bio->bi_status),
sizeof(rpdu), &rpdu,
blk_trace_bio_get_cgid(q, bio));
}
rcu_read_unlock();
}
/**
* blk_add_trace_bio_remap - Add a trace for a bio-remap operation
* @ignore: trace callback data parameter (not used)
* @bio: the source bio
* @dev: source device
* @from: source sector
*
* Called after a bio is remapped to a different device and/or sector.
**/
static void blk_add_trace_bio_remap(void *ignore, struct bio *bio, dev_t dev,
sector_t from)
{
struct request_queue *q = bio->bi_bdev->bd_disk->queue;
struct blk_trace *bt;
struct blk_io_trace_remap r;
rcu_read_lock();
bt = rcu_dereference(q->blk_trace);
if (likely(!bt)) {
rcu_read_unlock();
return;
}
r.device_from = cpu_to_be32(dev);
r.device_to = cpu_to_be32(bio_dev(bio));
r.sector_from = cpu_to_be64(from);
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 02:44:27 +04:00
__blk_add_trace(bt, bio->bi_iter.bi_sector, bio->bi_iter.bi_size,
bio_op(bio), bio->bi_opf, BLK_TA_REMAP,
blk_status_to_errno(bio->bi_status),
sizeof(r), &r, blk_trace_bio_get_cgid(q, bio));
rcu_read_unlock();
}
/**
* blk_add_trace_rq_remap - Add a trace for a request-remap operation
* @ignore: trace callback data parameter (not used)
* @rq: the source request
* @dev: target device
* @from: source sector
*
* Description:
* Device mapper remaps request to other devices.
* Add a trace for that action.
*
**/
static void blk_add_trace_rq_remap(void *ignore, struct request *rq, dev_t dev,
sector_t from)
{
struct blk_trace *bt;
struct blk_io_trace_remap r;
rcu_read_lock();
bt = rcu_dereference(rq->q->blk_trace);
if (likely(!bt)) {
rcu_read_unlock();
return;
}
r.device_from = cpu_to_be32(dev);
r.device_to = cpu_to_be32(disk_devt(rq->rq_disk));
r.sector_from = cpu_to_be64(from);
__blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq),
rq_data_dir(rq), 0, BLK_TA_REMAP, 0,
sizeof(r), &r, blk_trace_request_get_cgid(rq));
rcu_read_unlock();
}
/**
* blk_add_driver_data - Add binary message with driver-specific data
* @rq: io request
* @data: driver-specific data
* @len: length of driver-specific data
*
* Description:
* Some drivers might want to write driver-specific data per request.
*
**/
void blk_add_driver_data(struct request *rq, void *data, size_t len)
{
struct blk_trace *bt;
rcu_read_lock();
bt = rcu_dereference(rq->q->blk_trace);
if (likely(!bt)) {
rcu_read_unlock();
return;
}
__blk_add_trace(bt, blk_rq_trace_sector(rq), blk_rq_bytes(rq), 0, 0,
BLK_TA_DRV_DATA, 0, len, data,
blk_trace_request_get_cgid(rq));
rcu_read_unlock();
}
EXPORT_SYMBOL_GPL(blk_add_driver_data);
static void blk_register_tracepoints(void)
{
int ret;
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_rq_insert(blk_add_trace_rq_insert, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_rq_issue(blk_add_trace_rq_issue, NULL);
WARN_ON(ret);
ret = register_trace_block_rq_merge(blk_add_trace_rq_merge, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_rq_requeue(blk_add_trace_rq_requeue, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_rq_complete(blk_add_trace_rq_complete, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_bio_bounce(blk_add_trace_bio_bounce, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_bio_complete(blk_add_trace_bio_complete, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_bio_backmerge(blk_add_trace_bio_backmerge, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_bio_frontmerge(blk_add_trace_bio_frontmerge, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_bio_queue(blk_add_trace_bio_queue, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_getrq(blk_add_trace_getrq, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_plug(blk_add_trace_plug, NULL);
WARN_ON(ret);
ret = register_trace_block_unplug(blk_add_trace_unplug, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_split(blk_add_trace_split, NULL);
WARN_ON(ret);
ret = register_trace_block_bio_remap(blk_add_trace_bio_remap, NULL);
WARN_ON(ret);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
ret = register_trace_block_rq_remap(blk_add_trace_rq_remap, NULL);
WARN_ON(ret);
}
static void blk_unregister_tracepoints(void)
{
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
unregister_trace_block_rq_remap(blk_add_trace_rq_remap, NULL);
unregister_trace_block_bio_remap(blk_add_trace_bio_remap, NULL);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
unregister_trace_block_split(blk_add_trace_split, NULL);
unregister_trace_block_unplug(blk_add_trace_unplug, NULL);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
unregister_trace_block_plug(blk_add_trace_plug, NULL);
unregister_trace_block_getrq(blk_add_trace_getrq, NULL);
unregister_trace_block_bio_queue(blk_add_trace_bio_queue, NULL);
unregister_trace_block_bio_frontmerge(blk_add_trace_bio_frontmerge, NULL);
unregister_trace_block_bio_backmerge(blk_add_trace_bio_backmerge, NULL);
unregister_trace_block_bio_complete(blk_add_trace_bio_complete, NULL);
unregister_trace_block_bio_bounce(blk_add_trace_bio_bounce, NULL);
unregister_trace_block_rq_complete(blk_add_trace_rq_complete, NULL);
unregister_trace_block_rq_requeue(blk_add_trace_rq_requeue, NULL);
unregister_trace_block_rq_merge(blk_add_trace_rq_merge, NULL);
tracing: Let tracepoints have data passed to tracepoint callbacks This patch adds data to be passed to tracepoint callbacks. The created functions from DECLARE_TRACE() now need a mandatory data parameter. For example: DECLARE_TRACE(mytracepoint, int value, value) Will create the register function: int register_trace_mytracepoint((void(*)(void *data, int value))probe, void *data); As the first argument, all callbacks (probes) must take a (void *data) parameter. So a callback for the above tracepoint will look like: void myprobe(void *data, int value) { } The callback may choose to ignore the data parameter. This change allows callbacks to register a private data pointer along with the function probe. void mycallback(void *data, int value); register_trace_mytracepoint(mycallback, mydata); Then the mycallback() will receive the "mydata" as the first parameter before the args. A more detailed example: DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); /* In the C file */ DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status)); [...] trace_mytracepoint(status); /* In a file registering this tracepoint */ int my_callback(void *data, int status) { struct my_struct my_data = data; [...] } [...] my_data = kmalloc(sizeof(*my_data), GFP_KERNEL); init_my_data(my_data); register_trace_mytracepoint(my_callback, my_data); The same callback can also be registered to the same tracepoint as long as the data registered is different. Note, the data must also be used to unregister the callback: unregister_trace_mytracepoint(my_callback, my_data); Because of the data parameter, tracepoints declared this way can not have no args. That is: DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS()); will cause an error. If no arguments are needed, a new macro can be used instead: DECLARE_TRACE_NOARGS(mytracepoint); Since there are no arguments, the proto and args fields are left out. This is part of a series to make the tracepoint footprint smaller: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint Again, this patch also increases the size of the kernel, but lays the ground work for decreasing it. v5: Fixed net/core/drop_monitor.c to handle these updates. v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the #ifdef CONFIG_TRACE_POINTS, since the two are the same in both cases. The __DECLARE_TRACE() is what changes. Thanks to Frederic Weisbecker for pointing this out. v3: Made all register_* functions require data to be passed and all callbacks to take a void * parameter as its first argument. This makes the calling functions comply with C standards. Also added more comments to the modifications of DECLARE_TRACE(). v2: Made the DECLARE_TRACE() have the ability to pass arguments and added a new DECLARE_TRACE_NOARGS() for tracepoints that do not need any arguments. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 01:04:50 +04:00
unregister_trace_block_rq_issue(blk_add_trace_rq_issue, NULL);
unregister_trace_block_rq_insert(blk_add_trace_rq_insert, NULL);
tracepoint_synchronize_unregister();
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
/*
* struct blk_io_tracer formatting routines
*/
static void fill_rwbs(char *rwbs, const struct blk_io_trace *t)
{
int i = 0;
int tc = t->action >> BLK_TC_SHIFT;
if ((t->action & ~__BLK_TN_CGROUP) == BLK_TN_MESSAGE) {
rwbs[i++] = 'N';
goto out;
}
if (tc & BLK_TC_FLUSH)
rwbs[i++] = 'F';
if (tc & BLK_TC_DISCARD)
rwbs[i++] = 'D';
else if (tc & BLK_TC_WRITE)
rwbs[i++] = 'W';
else if (t->bytes)
rwbs[i++] = 'R';
else
rwbs[i++] = 'N';
if (tc & BLK_TC_FUA)
rwbs[i++] = 'F';
if (tc & BLK_TC_AHEAD)
rwbs[i++] = 'A';
if (tc & BLK_TC_SYNC)
rwbs[i++] = 'S';
if (tc & BLK_TC_META)
rwbs[i++] = 'M';
out:
rwbs[i] = '\0';
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static inline
const struct blk_io_trace *te_blk_io_trace(const struct trace_entry *ent)
{
return (const struct blk_io_trace *)ent;
}
static inline const void *pdu_start(const struct trace_entry *ent, bool has_cg)
{
return (void *)(te_blk_io_trace(ent) + 1) + (has_cg ? sizeof(u64) : 0);
}
static inline u64 t_cgid(const struct trace_entry *ent)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
return *(u64 *)(te_blk_io_trace(ent) + 1);
}
static inline int pdu_real_len(const struct trace_entry *ent, bool has_cg)
{
return te_blk_io_trace(ent)->pdu_len - (has_cg ? sizeof(u64) : 0);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
static inline u32 t_action(const struct trace_entry *ent)
{
return te_blk_io_trace(ent)->action;
}
static inline u32 t_bytes(const struct trace_entry *ent)
{
return te_blk_io_trace(ent)->bytes;
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static inline u32 t_sec(const struct trace_entry *ent)
{
return te_blk_io_trace(ent)->bytes >> 9;
}
static inline unsigned long long t_sector(const struct trace_entry *ent)
{
return te_blk_io_trace(ent)->sector;
}
static inline __u16 t_error(const struct trace_entry *ent)
{
return te_blk_io_trace(ent)->error;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static __u64 get_pdu_int(const struct trace_entry *ent, bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
const __be64 *val = pdu_start(ent, has_cg);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return be64_to_cpu(*val);
}
typedef void (blk_log_action_t) (struct trace_iterator *iter, const char *act,
bool has_cg);
static void blk_log_action_classic(struct trace_iterator *iter, const char *act,
bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
char rwbs[RWBS_LEN];
unsigned long long ts = iter->ts;
unsigned long nsec_rem = do_div(ts, NSEC_PER_SEC);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
unsigned secs = (unsigned long)ts;
const struct blk_io_trace *t = te_blk_io_trace(iter->ent);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
fill_rwbs(rwbs, t);
trace_seq_printf(&iter->seq,
"%3d,%-3d %2d %5d.%09lu %5u %2s %3s ",
MAJOR(t->device), MINOR(t->device), iter->cpu,
secs, nsec_rem, iter->ent->pid, act, rwbs);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_log_action(struct trace_iterator *iter, const char *act,
bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
char rwbs[RWBS_LEN];
const struct blk_io_trace *t = te_blk_io_trace(iter->ent);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
fill_rwbs(rwbs, t);
if (has_cg) {
u64 id = t_cgid(iter->ent);
if (blk_tracer_flags.val & TRACE_BLK_OPT_CGNAME) {
char blkcg_name_buf[NAME_MAX + 1] = "<...>";
cgroup_path_from_kernfs_id(id, blkcg_name_buf,
sizeof(blkcg_name_buf));
trace_seq_printf(&iter->seq, "%3d,%-3d %s %2s %3s ",
MAJOR(t->device), MINOR(t->device),
blkcg_name_buf, act, rwbs);
} else {
/*
* The cgid portion used to be "INO,GEN". Userland
* builds a FILEID_INO32_GEN fid out of them and
* opens the cgroup using open_by_handle_at(2).
* While 32bit ino setups are still the same, 64bit
* ones now use the 64bit ino as the whole ID and
* no longer use generation.
*
* Regardless of the content, always output
* "LOW32,HIGH32" so that FILEID_INO32_GEN fid can
* be mapped back to @id on both 64 and 32bit ino
* setups. See __kernfs_fh_to_dentry().
*/
trace_seq_printf(&iter->seq,
"%3d,%-3d %llx,%-llx %2s %3s ",
MAJOR(t->device), MINOR(t->device),
id & U32_MAX, id >> 32, act, rwbs);
}
} else
trace_seq_printf(&iter->seq, "%3d,%-3d %2s %3s ",
MAJOR(t->device), MINOR(t->device), act, rwbs);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_log_dump_pdu(struct trace_seq *s,
const struct trace_entry *ent, bool has_cg)
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
{
const unsigned char *pdu_buf;
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
int pdu_len;
int i, end;
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
pdu_buf = pdu_start(ent, has_cg);
pdu_len = pdu_real_len(ent, has_cg);
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
if (!pdu_len)
return;
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
/* find the last zero that needs to be printed */
for (end = pdu_len - 1; end >= 0; end--)
if (pdu_buf[end])
break;
end++;
trace_seq_putc(s, '(');
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
for (i = 0; i < pdu_len; i++) {
trace_seq_printf(s, "%s%02x",
i == 0 ? "" : " ", pdu_buf[i]);
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
/*
* stop when the rest is just zeros and indicate so
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
* with a ".." appended
*/
if (i == end && end != pdu_len - 1) {
trace_seq_puts(s, " ..) ");
return;
}
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
}
trace_seq_puts(s, ") ");
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
}
static void blk_log_generic(struct trace_seq *s, const struct trace_entry *ent, bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
char cmd[TASK_COMM_LEN];
trace_find_cmdline(ent->pid, cmd);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
if (t_action(ent) & BLK_TC_ACT(BLK_TC_PC)) {
trace_seq_printf(s, "%u ", t_bytes(ent));
blk_log_dump_pdu(s, ent, has_cg);
trace_seq_printf(s, "[%s]\n", cmd);
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
} else {
if (t_sec(ent))
trace_seq_printf(s, "%llu + %u [%s]\n",
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
t_sector(ent), t_sec(ent), cmd);
else
trace_seq_printf(s, "[%s]\n", cmd);
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_log_with_error(struct trace_seq *s,
const struct trace_entry *ent, bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
if (t_action(ent) & BLK_TC_ACT(BLK_TC_PC)) {
blk_log_dump_pdu(s, ent, has_cg);
trace_seq_printf(s, "[%d]\n", t_error(ent));
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
} else {
if (t_sec(ent))
trace_seq_printf(s, "%llu + %u [%d]\n",
t_sector(ent),
t_sec(ent), t_error(ent));
else
trace_seq_printf(s, "%llu [%d]\n",
t_sector(ent), t_error(ent));
blktrace: fix output of BLK_TC_PC events BLK_TC_PC events should be treated differently with BLK_TC_FS events. Before this patch: # echo 1 > /sys/block/sda/sda1/trace/enable # echo pc > /sys/block/sda/sda1/trace/act_mask # echo blk > /debugfs/tracing/current_tracer # (generate some BLK_TC_PC events) # cat trace bash-2184 [000] 1774.275413: 8,7 I N [bash] bash-2184 [000] 1774.275435: 8,7 D N [bash] bash-2184 [000] 1774.275540: 8,7 I R [bash] bash-2184 [000] 1774.275547: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275580: 8,7 C N 0 [0] bash-2184 [000] 1774.275648: 8,7 I R [bash] bash-2184 [000] 1774.275653: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275682: 8,7 C N 0 [0] bash-2184 [000] 1774.275739: 8,7 I R [bash] bash-2184 [000] 1774.275744: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275771: 8,7 C N 0 [0] bash-2184 [000] 1774.275804: 8,7 I R [bash] bash-2184 [000] 1774.275808: 8,7 D R [bash] ksoftirqd/0-4 [000] 1774.275836: 8,7 C N 0 [0] After this patch: # cat trace bash-2263 [000] 366.782149: 8,7 I N 0 (00 ..) [bash] bash-2263 [000] 366.782323: 8,7 D N 0 (00 ..) [bash] bash-2263 [000] 366.782557: 8,7 I R 8 (25 00 ..) [bash] bash-2263 [000] 366.782560: 8,7 D R 8 (25 00 ..) [bash] ksoftirqd/0-4 [000] 366.782582: 8,7 C N (25 00 ..) [0] bash-2263 [000] 366.782648: 8,7 I R 8 (5a 00 3f 00) [bash] bash-2263 [000] 366.782650: 8,7 D R 8 (5a 00 3f 00) [bash] ksoftirqd/0-4 [000] 366.782669: 8,7 C N (5a 00 3f 00) [0] bash-2263 [000] 366.782710: 8,7 I R 8 (5a 00 08 00) [bash] bash-2263 [000] 366.782713: 8,7 D R 8 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.782730: 8,7 C N (5a 00 08 00) [0] bash-2263 [000] 366.783375: 8,7 I R 36 (5a 00 08 00) [bash] bash-2263 [000] 366.783379: 8,7 D R 36 (5a 00 08 00) [bash] ksoftirqd/0-4 [000] 366.783404: 8,7 C N (5a 00 08 00) [0] This is what we do with PC events in user-space blktrace. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <49D32387.9040106@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 12:19:19 +04:00
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_log_remap(struct trace_seq *s, const struct trace_entry *ent, bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
const struct blk_io_trace_remap *__r = pdu_start(ent, has_cg);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
trace_seq_printf(s, "%llu + %u <- (%d,%d) %llu\n",
t_sector(ent), t_sec(ent),
MAJOR(be32_to_cpu(__r->device_from)),
MINOR(be32_to_cpu(__r->device_from)),
be64_to_cpu(__r->sector_from));
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_log_plug(struct trace_seq *s, const struct trace_entry *ent, bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
char cmd[TASK_COMM_LEN];
trace_find_cmdline(ent->pid, cmd);
trace_seq_printf(s, "[%s]\n", cmd);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_log_unplug(struct trace_seq *s, const struct trace_entry *ent, bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
char cmd[TASK_COMM_LEN];
trace_find_cmdline(ent->pid, cmd);
trace_seq_printf(s, "[%s] %llu\n", cmd, get_pdu_int(ent, has_cg));
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_log_split(struct trace_seq *s, const struct trace_entry *ent, bool has_cg)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
char cmd[TASK_COMM_LEN];
trace_find_cmdline(ent->pid, cmd);
trace_seq_printf(s, "%llu / %llu [%s]\n", t_sector(ent),
get_pdu_int(ent, has_cg), cmd);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_log_msg(struct trace_seq *s, const struct trace_entry *ent,
bool has_cg)
{
trace_seq_putmem(s, pdu_start(ent, has_cg),
pdu_real_len(ent, has_cg));
trace_seq_putc(s, '\n');
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
/*
* struct tracer operations
*/
static void blk_tracer_print_header(struct seq_file *m)
{
if (!(blk_tracer_flags.val & TRACE_BLK_OPT_CLASSIC))
return;
seq_puts(m, "# DEV CPU TIMESTAMP PID ACT FLG\n"
"# | | | | | |\n");
}
static void blk_tracer_start(struct trace_array *tr)
{
blk_tracer_enabled = true;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static int blk_tracer_init(struct trace_array *tr)
{
blk_tr = tr;
blk_tracer_start(tr);
return 0;
}
static void blk_tracer_stop(struct trace_array *tr)
{
blk_tracer_enabled = false;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static void blk_tracer_reset(struct trace_array *tr)
{
blk_tracer_stop(tr);
}
static const struct {
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
const char *act[2];
void (*print)(struct trace_seq *s, const struct trace_entry *ent,
bool has_cg);
} what2act[] = {
[__BLK_TA_QUEUE] = {{ "Q", "queue" }, blk_log_generic },
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
[__BLK_TA_BACKMERGE] = {{ "M", "backmerge" }, blk_log_generic },
[__BLK_TA_FRONTMERGE] = {{ "F", "frontmerge" }, blk_log_generic },
[__BLK_TA_GETRQ] = {{ "G", "getrq" }, blk_log_generic },
[__BLK_TA_SLEEPRQ] = {{ "S", "sleeprq" }, blk_log_generic },
[__BLK_TA_REQUEUE] = {{ "R", "requeue" }, blk_log_with_error },
[__BLK_TA_ISSUE] = {{ "D", "issue" }, blk_log_generic },
[__BLK_TA_COMPLETE] = {{ "C", "complete" }, blk_log_with_error },
[__BLK_TA_PLUG] = {{ "P", "plug" }, blk_log_plug },
[__BLK_TA_UNPLUG_IO] = {{ "U", "unplug_io" }, blk_log_unplug },
[__BLK_TA_UNPLUG_TIMER] = {{ "UT", "unplug_timer" }, blk_log_unplug },
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
[__BLK_TA_INSERT] = {{ "I", "insert" }, blk_log_generic },
[__BLK_TA_SPLIT] = {{ "X", "split" }, blk_log_split },
[__BLK_TA_BOUNCE] = {{ "B", "bounce" }, blk_log_generic },
[__BLK_TA_REMAP] = {{ "A", "remap" }, blk_log_remap },
};
static enum print_line_t print_one_line(struct trace_iterator *iter,
bool classic)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
struct trace_array *tr = iter->tr;
struct trace_seq *s = &iter->seq;
const struct blk_io_trace *t;
u16 what;
bool long_act;
blk_log_action_t *log_action;
bool has_cg;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
t = te_blk_io_trace(iter->ent);
what = (t->action & ((1 << BLK_TC_SHIFT) - 1)) & ~__BLK_TA_CGROUP;
long_act = !!(tr->trace_flags & TRACE_ITER_VERBOSE);
log_action = classic ? &blk_log_action_classic : &blk_log_action;
has_cg = t->action & __BLK_TA_CGROUP;
if ((t->action & ~__BLK_TN_CGROUP) == BLK_TN_MESSAGE) {
log_action(iter, long_act ? "message" : "m", has_cg);
blk_log_msg(s, iter->ent, has_cg);
return trace_handle_return(s);
}
if (unlikely(what == 0 || what >= ARRAY_SIZE(what2act)))
trace_seq_printf(s, "Unknown action %x\n", what);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
else {
log_action(iter, what2act[what].act[long_act], has_cg);
what2act[what].print(s, iter->ent, has_cg);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
return trace_handle_return(s);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static enum print_line_t blk_trace_event_print(struct trace_iterator *iter,
int flags, struct trace_event *event)
{
return print_one_line(iter, false);
}
static void blk_trace_synthesize_old_trace(struct trace_iterator *iter)
{
struct trace_seq *s = &iter->seq;
struct blk_io_trace *t = (struct blk_io_trace *)iter->ent;
const int offset = offsetof(struct blk_io_trace, sector);
struct blk_io_trace old = {
.magic = BLK_IO_TRACE_MAGIC | BLK_IO_TRACE_VERSION,
.time = iter->ts,
};
trace_seq_putmem(s, &old, offset);
trace_seq_putmem(s, &t->sector,
sizeof(old) - offset + t->pdu_len);
}
static enum print_line_t
blk_trace_event_print_binary(struct trace_iterator *iter, int flags,
struct trace_event *event)
{
blk_trace_synthesize_old_trace(iter);
return trace_handle_return(&iter->seq);
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static enum print_line_t blk_tracer_print_line(struct trace_iterator *iter)
{
if (!(blk_tracer_flags.val & TRACE_BLK_OPT_CLASSIC))
return TRACE_TYPE_UNHANDLED;
return print_one_line(iter, true);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
static int
blk_tracer_set_flag(struct trace_array *tr, u32 old_flags, u32 bit, int set)
{
/* don't output context-info for blk_classic output */
if (bit == TRACE_BLK_OPT_CLASSIC) {
if (set)
tr->trace_flags &= ~TRACE_ITER_CONTEXT_INFO;
else
tr->trace_flags |= TRACE_ITER_CONTEXT_INFO;
}
return 0;
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static struct tracer blk_tracer __read_mostly = {
.name = "blk",
.init = blk_tracer_init,
.reset = blk_tracer_reset,
.start = blk_tracer_start,
.stop = blk_tracer_stop,
.print_header = blk_tracer_print_header,
.print_line = blk_tracer_print_line,
.flags = &blk_tracer_flags,
.set_flag = blk_tracer_set_flag,
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
};
static struct trace_event_functions trace_blk_event_funcs = {
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
.trace = blk_trace_event_print,
.binary = blk_trace_event_print_binary,
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
};
static struct trace_event trace_blk_event = {
.type = TRACE_BLK,
.funcs = &trace_blk_event_funcs,
};
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static int __init init_blk_tracer(void)
{
if (!register_trace_event(&trace_blk_event)) {
pr_warn("Warning: could not register block events\n");
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return 1;
}
if (register_tracer(&blk_tracer) != 0) {
pr_warn("Warning: could not register the block tracer\n");
unregister_trace_event(&trace_blk_event);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return 1;
}
return 0;
}
device_initcall(init_blk_tracer);
static int blk_trace_remove_queue(struct request_queue *q)
{
struct blk_trace *bt;
bt = rcu_replace_pointer(q->blk_trace, NULL,
lockdep_is_held(&q->debugfs_mutex));
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
if (bt == NULL)
return -EINVAL;
blktrace: Fix uaf in blk_trace access after removing by sysfs There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a896154119f ("blktrace: add ftrace plugin") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-23 16:49:21 +03:00
if (bt->trace_state == Blktrace_running) {
bt->trace_state = Blktrace_stopped;
spin_lock_irq(&running_trace_lock);
list_del_init(&bt->running_list);
spin_unlock_irq(&running_trace_lock);
relay_flush(bt->rchan);
}
blktrace: fix unlocked registration of tracepoints We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-05 19:16:09 +03:00
put_probe_ref();
synchronize_rcu();
blk_trace_free(bt);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return 0;
}
/*
* Setup everything required to start tracing
*/
static int blk_trace_setup_queue(struct request_queue *q,
struct block_device *bdev)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
struct blk_trace *bt = NULL;
int ret = -ENOMEM;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
bt = kzalloc(sizeof(*bt), GFP_KERNEL);
if (!bt)
return -ENOMEM;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
bt->msg_data = __alloc_percpu(BLK_TN_MAX_MSG, __alignof__(char));
if (!bt->msg_data)
goto free_bt;
bt->dev = bdev->bd_dev;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
bt->act_mask = (u16)-1;
blk_trace_setup_lba(bt, bdev);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
rcu_assign_pointer(q->blk_trace, bt);
blktrace: fix unlocked registration of tracepoints We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-05 19:16:09 +03:00
get_probe_ref();
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return 0;
free_bt:
blk_trace_free(bt);
return ret;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
/*
* sysfs interface to enable and configure tracing
*/
static ssize_t sysfs_blk_trace_attr_show(struct device *dev,
struct device_attribute *attr,
char *buf);
static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count);
#define BLK_TRACE_DEVICE_ATTR(_name) \
DEVICE_ATTR(_name, S_IRUGO | S_IWUSR, \
sysfs_blk_trace_attr_show, \
sysfs_blk_trace_attr_store)
static BLK_TRACE_DEVICE_ATTR(enable);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static BLK_TRACE_DEVICE_ATTR(act_mask);
static BLK_TRACE_DEVICE_ATTR(pid);
static BLK_TRACE_DEVICE_ATTR(start_lba);
static BLK_TRACE_DEVICE_ATTR(end_lba);
static struct attribute *blk_trace_attrs[] = {
&dev_attr_enable.attr,
&dev_attr_act_mask.attr,
&dev_attr_pid.attr,
&dev_attr_start_lba.attr,
&dev_attr_end_lba.attr,
NULL
};
struct attribute_group blk_trace_attr_group = {
.name = "trace",
.attrs = blk_trace_attrs,
};
static const struct {
int mask;
const char *str;
} mask_maps[] = {
{ BLK_TC_READ, "read" },
{ BLK_TC_WRITE, "write" },
{ BLK_TC_FLUSH, "flush" },
{ BLK_TC_SYNC, "sync" },
{ BLK_TC_QUEUE, "queue" },
{ BLK_TC_REQUEUE, "requeue" },
{ BLK_TC_ISSUE, "issue" },
{ BLK_TC_COMPLETE, "complete" },
{ BLK_TC_FS, "fs" },
{ BLK_TC_PC, "pc" },
{ BLK_TC_NOTIFY, "notify" },
{ BLK_TC_AHEAD, "ahead" },
{ BLK_TC_META, "meta" },
{ BLK_TC_DISCARD, "discard" },
{ BLK_TC_DRV_DATA, "drv_data" },
{ BLK_TC_FUA, "fua" },
};
static int blk_trace_str2mask(const char *str)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
{
int i;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
int mask = 0;
char *buf, *s, *token;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
buf = kstrdup(str, GFP_KERNEL);
if (buf == NULL)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return -ENOMEM;
s = strstrip(buf);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
while (1) {
token = strsep(&s, ",");
if (token == NULL)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
break;
if (*token == '\0')
continue;
for (i = 0; i < ARRAY_SIZE(mask_maps); i++) {
if (strcasecmp(token, mask_maps[i].str) == 0) {
mask |= mask_maps[i].mask;
break;
}
}
if (i == ARRAY_SIZE(mask_maps)) {
mask = -EINVAL;
break;
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
kfree(buf);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return mask;
}
static ssize_t blk_trace_mask2str(char *buf, int mask)
{
int i;
char *p = buf;
for (i = 0; i < ARRAY_SIZE(mask_maps); i++) {
if (mask & mask_maps[i].mask) {
p += sprintf(p, "%s%s",
(p == buf) ? "" : ",", mask_maps[i].str);
}
}
*p++ = '\n';
return p - buf;
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
static ssize_t sysfs_blk_trace_attr_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct block_device *bdev = dev_to_bdev(dev);
struct request_queue *q = bdev_get_queue(bdev);
struct blk_trace *bt;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
ssize_t ret = -ENXIO;
mutex_lock(&q->debugfs_mutex);
bt = rcu_dereference_protected(q->blk_trace,
lockdep_is_held(&q->debugfs_mutex));
if (attr == &dev_attr_enable) {
ret = sprintf(buf, "%u\n", !!bt);
goto out_unlock_bdev;
}
if (bt == NULL)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
ret = sprintf(buf, "disabled\n");
else if (attr == &dev_attr_act_mask)
ret = blk_trace_mask2str(buf, bt->act_mask);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
else if (attr == &dev_attr_pid)
ret = sprintf(buf, "%u\n", bt->pid);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
else if (attr == &dev_attr_start_lba)
ret = sprintf(buf, "%llu\n", bt->start_lba);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
else if (attr == &dev_attr_end_lba)
ret = sprintf(buf, "%llu\n", bt->end_lba);
out_unlock_bdev:
mutex_unlock(&q->debugfs_mutex);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
return ret;
}
static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct block_device *bdev = dev_to_bdev(dev);
struct request_queue *q = bdev_get_queue(bdev);
struct blk_trace *bt;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
u64 value;
ssize_t ret = -EINVAL;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
if (count == 0)
goto out;
if (attr == &dev_attr_act_mask) {
if (kstrtoull(buf, 0, &value)) {
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
/* Assume it is a list of trace category names */
ret = blk_trace_str2mask(buf);
if (ret < 0)
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
goto out;
value = ret;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
} else {
if (kstrtoull(buf, 0, &value))
goto out;
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
mutex_lock(&q->debugfs_mutex);
bt = rcu_dereference_protected(q->blk_trace,
lockdep_is_held(&q->debugfs_mutex));
if (attr == &dev_attr_enable) {
if (!!value == !!bt) {
ret = 0;
goto out_unlock_bdev;
}
if (value)
ret = blk_trace_setup_queue(q, bdev);
else
ret = blk_trace_remove_queue(q);
goto out_unlock_bdev;
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
ret = 0;
if (bt == NULL) {
ret = blk_trace_setup_queue(q, bdev);
bt = rcu_dereference_protected(q->blk_trace,
lockdep_is_held(&q->debugfs_mutex));
}
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
if (ret == 0) {
if (attr == &dev_attr_act_mask)
bt->act_mask = value;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
else if (attr == &dev_attr_pid)
bt->pid = value;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
else if (attr == &dev_attr_start_lba)
bt->start_lba = value;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
else if (attr == &dev_attr_end_lba)
bt->end_lba = value;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
out_unlock_bdev:
mutex_unlock(&q->debugfs_mutex);
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
out:
return ret ? ret : count;
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 17:06:27 +03:00
}
int blk_trace_init_sysfs(struct device *dev)
{
return sysfs_create_group(&dev->kobj, &blk_trace_attr_group);
}
Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs introduced in commit 1d54ad6da9192fed5dd3b60224d9f2dfea0dcd82. Release kobject also in case the request_fn is NULL. Problem was noticed via kmemleak backtrace when some sysfs entries were note properly destroyed during device removal: unreferenced object 0xffff88001aa76640 (size 80): comm "lvcreate", pid 2120, jiffies 4294885144 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 f0 65 a7 1a 00 88 ff ff .........e...... 90 66 a7 1a 00 88 ff ff 86 1d 53 81 ff ff ff ff .f........S..... backtrace: [<ffffffff813f9cc6>] kmemleak_alloc+0x26/0x60 [<ffffffff8111d693>] kmem_cache_alloc+0x133/0x1c0 [<ffffffff81195891>] sysfs_new_dirent+0x41/0x120 [<ffffffff81194b0c>] sysfs_add_file_mode+0x3c/0xb0 [<ffffffff81197c81>] internal_create_group+0xc1/0x1a0 [<ffffffff81197d93>] sysfs_create_group+0x13/0x20 [<ffffffff810d8004>] blk_trace_init_sysfs+0x14/0x20 [<ffffffff8123f45c>] blk_register_queue+0x3c/0xf0 [<ffffffff812447e4>] add_disk+0x94/0x160 [<ffffffffa00d8b08>] dm_create+0x598/0x6e0 [dm_mod] [<ffffffffa00de951>] dev_create+0x51/0x350 [dm_mod] [<ffffffffa00de823>] ctl_ioctl+0x1a3/0x240 [dm_mod] [<ffffffffa00de8f2>] dm_compat_ctl_ioctl+0x12/0x20 [dm_mod] [<ffffffff81177bfd>] compat_sys_ioctl+0xcd/0x4f0 [<ffffffff81036ed8>] sysenter_dispatch+0x7/0x2c [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-25 08:19:26 +04:00
void blk_trace_remove_sysfs(struct device *dev)
{
sysfs_remove_group(&dev->kobj, &blk_trace_attr_group);
}
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
#endif /* CONFIG_BLK_DEV_IO_TRACE */
#ifdef CONFIG_EVENT_TRACING
/**
* blk_fill_rwbs - Fill the buffer rwbs by mapping op to character string.
* @rwbs: buffer to be filled
* @op: REQ_OP_XXX for the tracepoint
*
* Description:
* Maps the REQ_OP_XXX to character and fills the buffer provided by the
* caller with resulting string.
*
**/
void blk_fill_rwbs(char *rwbs, unsigned int op)
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
{
int i = 0;
if (op & REQ_PREFLUSH)
rwbs[i++] = 'F';
switch (op & REQ_OP_MASK) {
case REQ_OP_WRITE:
case REQ_OP_WRITE_SAME:
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
rwbs[i++] = 'W';
break;
case REQ_OP_DISCARD:
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
rwbs[i++] = 'D';
break;
case REQ_OP_SECURE_ERASE:
rwbs[i++] = 'D';
rwbs[i++] = 'E';
break;
case REQ_OP_FLUSH:
rwbs[i++] = 'F';
break;
case REQ_OP_READ:
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
rwbs[i++] = 'R';
break;
default:
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
rwbs[i++] = 'N';
}
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
if (op & REQ_FUA)
rwbs[i++] = 'F';
if (op & REQ_RAHEAD)
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
rwbs[i++] = 'A';
if (op & REQ_SYNC)
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
rwbs[i++] = 'S';
if (op & REQ_META)
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
rwbs[i++] = 'M';
rwbs[i] = '\0';
}
EXPORT_SYMBOL_GPL(blk_fill_rwbs);
tracing/events: convert block trace points to TRACE_EVENT() TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 09:43:05 +04:00
#endif /* CONFIG_EVENT_TRACING */