WSL2-Linux-Kernel/drivers/net/tun.c

1220 строки
27 KiB
C
Исходник Обычный вид История

/*
* TUN - Universal TUN/TAP device driver.
* Copyright (C) 1999-2002 Maxim Krasnyansky <maxk@qualcomm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* $Id: tun.c,v 1.15 2002/03/01 02:44:24 maxk Exp $
*/
/*
* Changes:
*
* Mike Kershaw <dragorn@kismetwireless.net> 2005/08/14
* Add TUNSETLINK ioctl to set the link encapsulation
*
* Mark Smith <markzzzsmith@yahoo.com.au>
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
* Use random_ether_addr() for tap MAC address.
*
* Harald Roelle <harald.roelle@ifi.lmu.de> 2004/04/20
* Fixes in packet dropping, queue length setting and queue wakeup.
* Increased default tx queue length.
* Added ethtool API.
* Minor cleanups
*
* Daniel Podlejski <underley@underley.eu.org>
* Modifications for 2.3.99-pre5 kernel.
*/
#define DRV_NAME "tun"
#define DRV_VERSION "1.6"
#define DRV_DESCRIPTION "Universal TUN/TAP device driver"
#define DRV_COPYRIGHT "(C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>"
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/miscdevice.h>
#include <linux/ethtool.h>
#include <linux/rtnetlink.h>
#include <linux/if.h>
#include <linux/if_arp.h>
#include <linux/if_ether.h>
#include <linux/if_tun.h>
#include <linux/crc32.h>
#include <linux/nsproxy.h>
#include <linux/virtio_net.h>
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 22:56:21 +04:00
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <asm/system.h>
#include <asm/uaccess.h>
/* Uncomment to enable debugging */
/* #define TUN_DEBUG 1 */
#ifdef TUN_DEBUG
static int debug;
#define DBG if(tun->debug)printk
#define DBG1 if(debug==2)printk
#else
#define DBG( a... )
#define DBG1( a... )
#endif
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
#define FLT_EXACT_COUNT 8
struct tap_filter {
unsigned int count; /* Number of addrs. Zero means disabled */
u32 mask[2]; /* Mask of the hashed addrs */
unsigned char addr[FLT_EXACT_COUNT][ETH_ALEN];
};
struct tun_struct {
struct list_head list;
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
unsigned int flags;
int attached;
uid_t owner;
gid_t group;
wait_queue_head_t read_wait;
struct sk_buff_head readq;
struct net_device *dev;
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
struct fasync_struct *fasync;
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
struct tap_filter txflt;
#ifdef TUN_DEBUG
int debug;
#endif
};
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
/* TAP filterting */
static void addr_hash_set(u32 *mask, const u8 *addr)
{
int n = ether_crc(ETH_ALEN, addr) >> 26;
mask[n >> 5] |= (1 << (n & 31));
}
static unsigned int addr_hash_test(const u32 *mask, const u8 *addr)
{
int n = ether_crc(ETH_ALEN, addr) >> 26;
return mask[n >> 5] & (1 << (n & 31));
}
static int update_filter(struct tap_filter *filter, void __user *arg)
{
struct { u8 u[ETH_ALEN]; } *addr;
struct tun_filter uf;
int err, alen, n, nexact;
if (copy_from_user(&uf, arg, sizeof(uf)))
return -EFAULT;
if (!uf.count) {
/* Disabled */
filter->count = 0;
return 0;
}
alen = ETH_ALEN * uf.count;
addr = kmalloc(alen, GFP_KERNEL);
if (!addr)
return -ENOMEM;
if (copy_from_user(addr, arg + sizeof(uf), alen)) {
err = -EFAULT;
goto done;
}
/* The filter is updated without holding any locks. Which is
* perfectly safe. We disable it first and in the worst
* case we'll accept a few undesired packets. */
filter->count = 0;
wmb();
/* Use first set of addresses as an exact filter */
for (n = 0; n < uf.count && n < FLT_EXACT_COUNT; n++)
memcpy(filter->addr[n], addr[n].u, ETH_ALEN);
nexact = n;
/* The rest is hashed */
memset(filter->mask, 0, sizeof(filter->mask));
for (; n < uf.count; n++)
addr_hash_set(filter->mask, addr[n].u);
/* For ALLMULTI just set the mask to all ones.
* This overrides the mask populated above. */
if ((uf.flags & TUN_FLT_ALLMULTI))
memset(filter->mask, ~0, sizeof(filter->mask));
/* Now enable the filter */
wmb();
filter->count = nexact;
/* Return the number of exact filters */
err = nexact;
done:
kfree(addr);
return err;
}
/* Returns: 0 - drop, !=0 - accept */
static int run_filter(struct tap_filter *filter, const struct sk_buff *skb)
{
/* Cannot use eth_hdr(skb) here because skb_mac_hdr() is incorrect
* at this point. */
struct ethhdr *eh = (struct ethhdr *) skb->data;
int i;
/* Exact match */
for (i = 0; i < filter->count; i++)
if (!compare_ether_addr(eh->h_dest, filter->addr[i]))
return 1;
/* Inexact match (multicast only) */
if (is_multicast_ether_addr(eh->h_dest))
return addr_hash_test(filter->mask, eh->h_dest);
return 0;
}
/*
* Checks whether the packet is accepted or not.
* Returns: 0 - drop, !=0 - accept
*/
static int check_filter(struct tap_filter *filter, const struct sk_buff *skb)
{
if (!filter->count)
return 1;
return run_filter(filter, skb);
}
/* Network device part of the driver */
static unsigned int tun_net_id;
struct tun_net {
struct list_head dev_list;
};
static const struct ethtool_ops tun_ethtool_ops;
/* Net device open. */
static int tun_net_open(struct net_device *dev)
{
netif_start_queue(dev);
return 0;
}
/* Net device close. */
static int tun_net_close(struct net_device *dev)
{
netif_stop_queue(dev);
return 0;
}
/* Net device start xmit */
static int tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
DBG(KERN_INFO "%s: tun_net_xmit %d\n", tun->dev->name, skb->len);
/* Drop packet if interface is not attached */
if (!tun->attached)
goto drop;
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
/* Drop if the filter does not like it.
* This is a noop if the filter is disabled.
* Filter can be enabled only for the TAP devices. */
if (!check_filter(&tun->txflt, skb))
goto drop;
if (skb_queue_len(&tun->readq) >= dev->tx_queue_len) {
if (!(tun->flags & TUN_ONE_QUEUE)) {
/* Normal queueing mode. */
/* Packet scheduler handles dropping of further packets. */
netif_stop_queue(dev);
/* We won't see all dropped packets individually, so overrun
* error is more appropriate. */
dev->stats.tx_fifo_errors++;
} else {
/* Single queue mode.
* Driver handles dropping of all packets itself. */
goto drop;
}
}
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
/* Enqueue packet */
skb_queue_tail(&tun->readq, skb);
dev->trans_start = jiffies;
/* Notify and wake up reader process */
if (tun->flags & TUN_FASYNC)
kill_fasync(&tun->fasync, SIGIO, POLL_IN);
wake_up_interruptible(&tun->read_wait);
return 0;
drop:
dev->stats.tx_dropped++;
kfree_skb(skb);
return 0;
}
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
static void tun_net_mclist(struct net_device *dev)
{
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
/*
* This callback is supposed to deal with mc filter in
* _rx_ path and has nothing to do with the _tx_ path.
* In rx path we always accept everything userspace gives us.
*/
return;
}
#define MIN_MTU 68
#define MAX_MTU 65535
static int
tun_net_change_mtu(struct net_device *dev, int new_mtu)
{
if (new_mtu < MIN_MTU || new_mtu + dev->hard_header_len > MAX_MTU)
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
/* Initialize net device. */
static void tun_net_init(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
switch (tun->flags & TUN_TYPE_MASK) {
case TUN_TUN_DEV:
/* Point-to-Point TUN Device */
dev->hard_header_len = 0;
dev->addr_len = 0;
dev->mtu = 1500;
dev->change_mtu = tun_net_change_mtu;
/* Zero header length */
dev->type = ARPHRD_NONE;
dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
dev->tx_queue_len = TUN_READQ_SIZE; /* We prefer our own queue length */
break;
case TUN_TAP_DEV:
/* Ethernet TAP Device */
ether_setup(dev);
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
dev->change_mtu = tun_net_change_mtu;
dev->set_multicast_list = tun_net_mclist;
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
random_ether_addr(dev->dev_addr);
dev->tx_queue_len = TUN_READQ_SIZE; /* We prefer our own queue length */
break;
}
}
/* Character device part */
/* Poll */
static unsigned int tun_chr_poll(struct file *file, poll_table * wait)
{
struct tun_struct *tun = file->private_data;
unsigned int mask = POLLOUT | POLLWRNORM;
if (!tun)
return -EBADFD;
DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
poll_wait(file, &tun->read_wait, wait);
if (!skb_queue_empty(&tun->readq))
mask |= POLLIN | POLLRDNORM;
return mask;
}
/* Get packet from user space buffer */
static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv, size_t count)
{
struct tun_pi pi = { 0, __constant_htons(ETH_P_IP) };
struct sk_buff *skb;
size_t len = count, align = 0;
struct virtio_net_hdr gso = { 0 };
if (!(tun->flags & TUN_NO_PI)) {
if ((len -= sizeof(pi)) > count)
return -EINVAL;
if(memcpy_fromiovec((void *)&pi, iv, sizeof(pi)))
return -EFAULT;
}
if (tun->flags & TUN_VNET_HDR) {
if ((len -= sizeof(gso)) > count)
return -EINVAL;
if (memcpy_fromiovec((void *)&gso, iv, sizeof(gso)))
return -EFAULT;
if (gso.hdr_len > len)
return -EINVAL;
}
if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) {
align = NET_IP_ALIGN;
if (unlikely(len < ETH_HLEN))
return -EINVAL;
}
if (!(skb = alloc_skb(len + align, GFP_KERNEL))) {
tun->dev->stats.rx_dropped++;
return -ENOMEM;
}
if (align)
skb_reserve(skb, align);
if (memcpy_fromiovec(skb_put(skb, len), iv, len)) {
tun->dev->stats.rx_dropped++;
kfree_skb(skb);
return -EFAULT;
}
if (gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
if (!skb_partial_csum_set(skb, gso.csum_start,
gso.csum_offset)) {
tun->dev->stats.rx_frame_errors++;
kfree_skb(skb);
return -EINVAL;
}
} else if (tun->flags & TUN_NOCHECKSUM)
skb->ip_summed = CHECKSUM_UNNECESSARY;
switch (tun->flags & TUN_TYPE_MASK) {
case TUN_TUN_DEV:
if (tun->flags & TUN_NO_PI) {
switch (skb->data[0] & 0xf0) {
case 0x40:
pi.proto = htons(ETH_P_IP);
break;
case 0x60:
pi.proto = htons(ETH_P_IPV6);
break;
default:
tun->dev->stats.rx_dropped++;
kfree_skb(skb);
return -EINVAL;
}
}
skb_reset_mac_header(skb);
skb->protocol = pi.proto;
skb->dev = tun->dev;
break;
case TUN_TAP_DEV:
skb->protocol = eth_type_trans(skb, tun->dev);
break;
};
if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
case VIRTIO_NET_HDR_GSO_TCPV4:
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
break;
case VIRTIO_NET_HDR_GSO_TCPV6:
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
break;
default:
tun->dev->stats.rx_frame_errors++;
kfree_skb(skb);
return -EINVAL;
}
if (gso.gso_type & VIRTIO_NET_HDR_GSO_ECN)
skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN;
skb_shinfo(skb)->gso_size = gso.gso_size;
if (skb_shinfo(skb)->gso_size == 0) {
tun->dev->stats.rx_frame_errors++;
kfree_skb(skb);
return -EINVAL;
}
/* Header must be checked, and gso_segs computed. */
skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY;
skb_shinfo(skb)->gso_segs = 0;
}
netif_rx_ni(skb);
tun->dev->last_rx = jiffies;
tun->dev->stats.rx_packets++;
tun->dev->stats.rx_bytes += len;
return count;
}
static ssize_t tun_chr_aio_write(struct kiocb *iocb, const struct iovec *iv,
unsigned long count, loff_t pos)
{
struct tun_struct *tun = iocb->ki_filp->private_data;
if (!tun)
return -EBADFD;
DBG(KERN_INFO "%s: tun_chr_write %ld\n", tun->dev->name, count);
return tun_get_user(tun, (struct iovec *) iv, iov_length(iv, count));
}
/* Put packet to the user space buffer */
static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
struct sk_buff *skb,
struct iovec *iv, int len)
{
struct tun_pi pi = { 0, skb->protocol };
ssize_t total = 0;
if (!(tun->flags & TUN_NO_PI)) {
if ((len -= sizeof(pi)) < 0)
return -EINVAL;
if (len < skb->len) {
/* Packet will be striped */
pi.flags |= TUN_PKT_STRIP;
}
if (memcpy_toiovec(iv, (void *) &pi, sizeof(pi)))
return -EFAULT;
total += sizeof(pi);
}
if (tun->flags & TUN_VNET_HDR) {
struct virtio_net_hdr gso = { 0 }; /* no info leak */
if ((len -= sizeof(gso)) < 0)
return -EINVAL;
if (skb_is_gso(skb)) {
struct skb_shared_info *sinfo = skb_shinfo(skb);
/* This is a hint as to how much should be linear. */
gso.hdr_len = skb_headlen(skb);
gso.gso_size = sinfo->gso_size;
if (sinfo->gso_type & SKB_GSO_TCPV4)
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (sinfo->gso_type & SKB_GSO_TCPV6)
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
else
BUG();
if (sinfo->gso_type & SKB_GSO_TCP_ECN)
gso.gso_type |= VIRTIO_NET_HDR_GSO_ECN;
} else
gso.gso_type = VIRTIO_NET_HDR_GSO_NONE;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
gso.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
gso.csum_start = skb->csum_start - skb_headroom(skb);
gso.csum_offset = skb->csum_offset;
} /* else everything is zero */
if (unlikely(memcpy_toiovec(iv, (void *)&gso, sizeof(gso))))
return -EFAULT;
total += sizeof(gso);
}
len = min_t(int, skb->len, len);
skb_copy_datagram_iovec(skb, 0, iv, len);
total += len;
tun->dev->stats.tx_packets++;
tun->dev->stats.tx_bytes += len;
return total;
}
static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv,
unsigned long count, loff_t pos)
{
struct file *file = iocb->ki_filp;
struct tun_struct *tun = file->private_data;
DECLARE_WAITQUEUE(wait, current);
struct sk_buff *skb;
ssize_t len, ret = 0;
if (!tun)
return -EBADFD;
DBG(KERN_INFO "%s: tun_chr_read\n", tun->dev->name);
len = iov_length(iv, count);
if (len < 0)
return -EINVAL;
add_wait_queue(&tun->read_wait, &wait);
while (len) {
current->state = TASK_INTERRUPTIBLE;
/* Read frames from the queue */
if (!(skb=skb_dequeue(&tun->readq))) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
break;
}
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
/* Nothing to read, let's sleep */
schedule();
continue;
}
netif_wake_queue(tun->dev);
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
ret = tun_put_user(tun, skb, (struct iovec *) iv, len);
kfree_skb(skb);
break;
}
current->state = TASK_RUNNING;
remove_wait_queue(&tun->read_wait, &wait);
return ret;
}
static void tun_setup(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
skb_queue_head_init(&tun->readq);
init_waitqueue_head(&tun->read_wait);
tun->owner = -1;
tun->group = -1;
dev->open = tun_net_open;
dev->hard_start_xmit = tun_net_xmit;
dev->stop = tun_net_close;
dev->ethtool_ops = &tun_ethtool_ops;
dev->destructor = free_netdev;
dev->features |= NETIF_F_NETNS_LOCAL;
}
static struct tun_struct *tun_get_by_name(struct tun_net *tn, const char *name)
{
struct tun_struct *tun;
ASSERT_RTNL();
list_for_each_entry(tun, &tn->dev_list, list) {
if (!strncmp(tun->dev->name, name, IFNAMSIZ))
return tun;
}
return NULL;
}
static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
{
struct tun_net *tn;
struct tun_struct *tun;
struct net_device *dev;
int err;
tn = net_generic(net, tun_net_id);
tun = tun_get_by_name(tn, ifr->ifr_name);
if (tun) {
if (tun->attached)
return -EBUSY;
/* Check permissions */
if (((tun->owner != -1 &&
current->euid != tun->owner) ||
(tun->group != -1 &&
current->egid != tun->group)) &&
!capable(CAP_NET_ADMIN))
return -EPERM;
}
else if (__dev_get_by_name(net, ifr->ifr_name))
return -EINVAL;
else {
char *name;
unsigned long flags = 0;
err = -EINVAL;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
/* Set dev type */
if (ifr->ifr_flags & IFF_TUN) {
/* TUN device */
flags |= TUN_TUN_DEV;
name = "tun%d";
} else if (ifr->ifr_flags & IFF_TAP) {
/* TAP device */
flags |= TUN_TAP_DEV;
name = "tap%d";
} else
goto failed;
if (*ifr->ifr_name)
name = ifr->ifr_name;
dev = alloc_netdev(sizeof(struct tun_struct), name,
tun_setup);
if (!dev)
return -ENOMEM;
dev_net_set(dev, net);
tun = netdev_priv(dev);
tun->dev = dev;
tun->flags = flags;
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
tun->txflt.count = 0;
tun_net_init(dev);
if (strchr(dev->name, '%')) {
err = dev_alloc_name(dev, dev->name);
if (err < 0)
goto err_free_dev;
}
err = register_netdevice(tun->dev);
if (err < 0)
goto err_free_dev;
list_add(&tun->list, &tn->dev_list);
}
DBG(KERN_INFO "%s: tun_set_iff\n", tun->dev->name);
if (ifr->ifr_flags & IFF_NO_PI)
tun->flags |= TUN_NO_PI;
else
tun->flags &= ~TUN_NO_PI;
if (ifr->ifr_flags & IFF_ONE_QUEUE)
tun->flags |= TUN_ONE_QUEUE;
else
tun->flags &= ~TUN_ONE_QUEUE;
if (ifr->ifr_flags & IFF_VNET_HDR)
tun->flags |= TUN_VNET_HDR;
else
tun->flags &= ~TUN_VNET_HDR;
file->private_data = tun;
tun->attached = 1;
get_net(dev_net(tun->dev));
/* Make sure persistent devices do not get stuck in
* xoff state.
*/
if (netif_running(tun->dev))
netif_wake_queue(tun->dev);
strcpy(ifr->ifr_name, tun->dev->name);
return 0;
err_free_dev:
free_netdev(dev);
failed:
return err;
}
static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
{
struct tun_struct *tun = file->private_data;
if (!tun)
return -EBADFD;
DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name);
strcpy(ifr->ifr_name, tun->dev->name);
ifr->ifr_flags = 0;
if (ifr->ifr_flags & TUN_TUN_DEV)
ifr->ifr_flags |= IFF_TUN;
else
ifr->ifr_flags |= IFF_TAP;
if (tun->flags & TUN_NO_PI)
ifr->ifr_flags |= IFF_NO_PI;
if (tun->flags & TUN_ONE_QUEUE)
ifr->ifr_flags |= IFF_ONE_QUEUE;
if (tun->flags & TUN_VNET_HDR)
ifr->ifr_flags |= IFF_VNET_HDR;
return 0;
}
/* This is like a cut-down ethtool ops, except done via tun fd so no
* privs required. */
static int set_offload(struct net_device *dev, unsigned long arg)
{
unsigned int old_features, features;
old_features = dev->features;
/* Unset features, set them as we chew on the arg. */
features = (old_features & ~(NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST
|NETIF_F_TSO_ECN|NETIF_F_TSO|NETIF_F_TSO6));
if (arg & TUN_F_CSUM) {
features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
arg &= ~TUN_F_CSUM;
if (arg & (TUN_F_TSO4|TUN_F_TSO6)) {
if (arg & TUN_F_TSO_ECN) {
features |= NETIF_F_TSO_ECN;
arg &= ~TUN_F_TSO_ECN;
}
if (arg & TUN_F_TSO4)
features |= NETIF_F_TSO;
if (arg & TUN_F_TSO6)
features |= NETIF_F_TSO6;
arg &= ~(TUN_F_TSO4|TUN_F_TSO6);
}
}
/* This gives the user a way to test for new features in future by
* trying to set them. */
if (arg)
return -EINVAL;
dev->features = features;
if (old_features != dev->features)
netdev_features_change(dev);
return 0;
}
static int tun_chr_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct tun_struct *tun = file->private_data;
void __user* argp = (void __user*)arg;
struct ifreq ifr;
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
int ret;
DECLARE_MAC_BUF(mac);
if (cmd == TUNSETIFF || _IOC_TYPE(cmd) == 0x89)
if (copy_from_user(&ifr, argp, sizeof ifr))
return -EFAULT;
if (cmd == TUNSETIFF && !tun) {
int err;
ifr.ifr_name[IFNAMSIZ-1] = '\0';
rtnl_lock();
err = tun_set_iff(current->nsproxy->net_ns, file, &ifr);
rtnl_unlock();
if (err)
return err;
if (copy_to_user(argp, &ifr, sizeof(ifr)))
return -EFAULT;
return 0;
}
tun: Interface to query tun/tap features. The problem with introducing checksum offload and gso to tun is they need to set dev->features to enable GSO and/or checksumming, which is supposed to be done before register_netdevice(), ie. as part of TUNSETIFF. Unfortunately, TUNSETIFF has always just ignored flags it doesn't understand, so there's no good way of detecting whether the kernel supports new IFF_ flags. This patch implements a TUNGETFEATURES ioctl which returns all the valid IFF flags. It could be extended later to include other features. Here's an example program which uses it: #include <linux/if_tun.h> #include <sys/types.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <fcntl.h> #include <err.h> #include <stdio.h> static struct { unsigned int flag; const char *name; } known_flags[] = { { IFF_TUN, "TUN" }, { IFF_TAP, "TAP" }, { IFF_NO_PI, "NO_PI" }, { IFF_ONE_QUEUE, "ONE_QUEUE" }, }; int main() { unsigned int features, i; int netfd = open("/dev/net/tun", O_RDWR); if (netfd < 0) err(1, "Opening /dev/net/tun"); if (ioctl(netfd, TUNGETFEATURES, &features) != 0) { printf("Kernel does not support TUNGETFEATURES, guessing\n"); features = (IFF_TUN|IFF_TAP|IFF_NO_PI|IFF_ONE_QUEUE); } printf("Available features are: "); for (i = 0; i < sizeof(known_flags)/sizeof(known_flags[0]); i++) { if (features & known_flags[i].flag) { features &= ~known_flags[i].flag; printf("%s ", known_flags[i].name); } } if (features) printf("(UNKNOWN %#x)", features); printf("\n"); return 0; } Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 14:45:32 +04:00
if (cmd == TUNGETFEATURES) {
/* Currently this just means: "what IFF flags are valid?".
* This is needed because we never checked for invalid flags on
* TUNSETIFF. */
return put_user(IFF_TUN | IFF_TAP | IFF_NO_PI | IFF_ONE_QUEUE |
IFF_VNET_HDR,
tun: Interface to query tun/tap features. The problem with introducing checksum offload and gso to tun is they need to set dev->features to enable GSO and/or checksumming, which is supposed to be done before register_netdevice(), ie. as part of TUNSETIFF. Unfortunately, TUNSETIFF has always just ignored flags it doesn't understand, so there's no good way of detecting whether the kernel supports new IFF_ flags. This patch implements a TUNGETFEATURES ioctl which returns all the valid IFF flags. It could be extended later to include other features. Here's an example program which uses it: #include <linux/if_tun.h> #include <sys/types.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <fcntl.h> #include <err.h> #include <stdio.h> static struct { unsigned int flag; const char *name; } known_flags[] = { { IFF_TUN, "TUN" }, { IFF_TAP, "TAP" }, { IFF_NO_PI, "NO_PI" }, { IFF_ONE_QUEUE, "ONE_QUEUE" }, }; int main() { unsigned int features, i; int netfd = open("/dev/net/tun", O_RDWR); if (netfd < 0) err(1, "Opening /dev/net/tun"); if (ioctl(netfd, TUNGETFEATURES, &features) != 0) { printf("Kernel does not support TUNGETFEATURES, guessing\n"); features = (IFF_TUN|IFF_TAP|IFF_NO_PI|IFF_ONE_QUEUE); } printf("Available features are: "); for (i = 0; i < sizeof(known_flags)/sizeof(known_flags[0]); i++) { if (features & known_flags[i].flag) { features &= ~known_flags[i].flag; printf("%s ", known_flags[i].name); } } if (features) printf("(UNKNOWN %#x)", features); printf("\n"); return 0; } Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-03 14:45:32 +04:00
(unsigned int __user*)argp);
}
if (!tun)
return -EBADFD;
DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd);
switch (cmd) {
case TUNGETIFF:
ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr);
if (ret)
return ret;
if (copy_to_user(argp, &ifr, sizeof(ifr)))
return -EFAULT;
break;
case TUNSETNOCSUM:
/* Disable/Enable checksum */
if (arg)
tun->flags |= TUN_NOCHECKSUM;
else
tun->flags &= ~TUN_NOCHECKSUM;
DBG(KERN_INFO "%s: checksum %s\n",
tun->dev->name, arg ? "disabled" : "enabled");
break;
case TUNSETPERSIST:
/* Disable/Enable persist mode */
if (arg)
tun->flags |= TUN_PERSIST;
else
tun->flags &= ~TUN_PERSIST;
DBG(KERN_INFO "%s: persist %s\n",
tun->dev->name, arg ? "enabled" : "disabled");
break;
case TUNSETOWNER:
/* Set owner of the device */
tun->owner = (uid_t) arg;
DBG(KERN_INFO "%s: owner set to %d\n", tun->dev->name, tun->owner);
break;
case TUNSETGROUP:
/* Set group of the device */
tun->group= (gid_t) arg;
DBG(KERN_INFO "%s: group set to %d\n", tun->dev->name, tun->group);
break;
case TUNSETLINK:
/* Only allow setting the type when the interface is down */
rtnl_lock();
if (tun->dev->flags & IFF_UP) {
DBG(KERN_INFO "%s: Linktype set failed because interface is up\n",
tun->dev->name);
ret = -EBUSY;
} else {
tun->dev->type = (int) arg;
DBG(KERN_INFO "%s: linktype set to %d\n", tun->dev->name, tun->dev->type);
ret = 0;
}
rtnl_unlock();
return ret;
#ifdef TUN_DEBUG
case TUNSETDEBUG:
tun->debug = arg;
break;
#endif
case TUNSETOFFLOAD:
rtnl_lock();
ret = set_offload(tun->dev, arg);
rtnl_unlock();
return ret;
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
case TUNSETTXFILTER:
/* Can be set only for TAPs */
if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV)
return -EINVAL;
rtnl_lock();
ret = update_filter(&tun->txflt, (void __user *)arg);
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
rtnl_unlock();
return ret;
case SIOCGIFHWADDR:
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
/* Get hw addres */
memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
ifr.ifr_hwaddr.sa_family = tun->dev->type;
if (copy_to_user(argp, &ifr, sizeof ifr))
return -EFAULT;
return 0;
case SIOCSIFHWADDR:
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
/* Set hw address */
DBG(KERN_DEBUG "%s: set hw address: %s\n",
tun->dev->name, print_mac(mac, ifr.ifr_hwaddr.sa_data));
rtnl_lock();
ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
rtnl_unlock();
tun: Fix/rewrite packet filtering logic Please see the following thread to get some context on this http://marc.info/?l=linux-netdev&m=121564433018903&w=2 Basically the issue is that current multi-cast filtering stuff in the TUN/TAP driver is seriously broken. Original patch went in without proper review and ACK. It was broken and confusing to start with and subsequent patches broke it completely. To give you an idea of what's broken here are some of the issues: - Very confusing comments throughout the code that imply that the character device is a network interface in its own right, and that packets are passed between the two nics. Which is completely wrong. - Wrong set of ioctls is used for setting up filters. They look like shortcuts for manipulating state of the tun/tap network interface but in reality manipulate the state of the TX filter. - ioctls that were originally used for setting address of the the TX filter got "fixed" and now set the address of the network interface itself. Which made filter totaly useless. - Filtering is done too late. Instead of filtering early on, to avoid unnecessary wakeups, filtering is done in the read() call. The list goes on and on :) So the patch cleans all that up. It introduces simple and clean interface for setting up TX filters (TUNSETTXFILTER + tun_filter spec) and does filtering before enqueuing the packets. TX filtering is useful in the scenarios where TAP is part of a bridge, in which case it gets all broadcast, multicast and potentially other packets when the bridge is learning. So for example Ethernet tunnelling app may want to setup TX filters to avoid tunnelling multicast traffic. QEMU and other hypervisors can push RX filtering that is currently done in the guest into the host context therefore saving wakeups and unnecessary data transfer. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 09:18:19 +04:00
return ret;
default:
return -EINVAL;
};
return 0;
}
static int tun_chr_fasync(int fd, struct file *file, int on)
{
struct tun_struct *tun = file->private_data;
int ret;
if (!tun)
return -EBADFD;
DBG(KERN_INFO "%s: tun_chr_fasync %d\n", tun->dev->name, on);
lock_kernel();
if ((ret = fasync_helper(fd, file, on, &tun->fasync)) < 0)
goto out;
if (on) {
ret = __f_setown(file, task_pid(current), PIDTYPE_PID, 0);
if (ret)
goto out;
tun->flags |= TUN_FASYNC;
} else
tun->flags &= ~TUN_FASYNC;
ret = 0;
out:
unlock_kernel();
return ret;
}
static int tun_chr_open(struct inode *inode, struct file * file)
{
cycle_kernel_lock();
DBG1(KERN_INFO "tunX: tun_chr_open\n");
file->private_data = NULL;
return 0;
}
static int tun_chr_close(struct inode *inode, struct file *file)
{
struct tun_struct *tun = file->private_data;
if (!tun)
return 0;
DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
tun_chr_fasync(-1, file, 0);
rtnl_lock();
/* Detach from net device */
file->private_data = NULL;
tun->attached = 0;
put_net(dev_net(tun->dev));
/* Drop read queue */
skb_queue_purge(&tun->readq);
if (!(tun->flags & TUN_PERSIST)) {
list_del(&tun->list);
unregister_netdevice(tun->dev);
}
rtnl_unlock();
return 0;
}
static const struct file_operations tun_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = do_sync_read,
.aio_read = tun_chr_aio_read,
.write = do_sync_write,
.aio_write = tun_chr_aio_write,
.poll = tun_chr_poll,
.ioctl = tun_chr_ioctl,
.open = tun_chr_open,
.release = tun_chr_close,
.fasync = tun_chr_fasync
};
static struct miscdevice tun_miscdev = {
.minor = TUN_MINOR,
.name = "tun",
.fops = &tun_fops,
};
/* ethtool interface */
static int tun_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
cmd->supported = 0;
cmd->advertising = 0;
cmd->speed = SPEED_10;
cmd->duplex = DUPLEX_FULL;
cmd->port = PORT_TP;
cmd->phy_address = 0;
cmd->transceiver = XCVR_INTERNAL;
cmd->autoneg = AUTONEG_DISABLE;
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
return 0;
}
static void tun_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
struct tun_struct *tun = netdev_priv(dev);
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
strcpy(info->fw_version, "N/A");
switch (tun->flags & TUN_TYPE_MASK) {
case TUN_TUN_DEV:
strcpy(info->bus_info, "tun");
break;
case TUN_TAP_DEV:
strcpy(info->bus_info, "tap");
break;
}
}
static u32 tun_get_msglevel(struct net_device *dev)
{
#ifdef TUN_DEBUG
struct tun_struct *tun = netdev_priv(dev);
return tun->debug;
#else
return -EOPNOTSUPP;
#endif
}
static void tun_set_msglevel(struct net_device *dev, u32 value)
{
#ifdef TUN_DEBUG
struct tun_struct *tun = netdev_priv(dev);
tun->debug = value;
#endif
}
static u32 tun_get_link(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
return tun->attached;
}
static u32 tun_get_rx_csum(struct net_device *dev)
{
struct tun_struct *tun = netdev_priv(dev);
return (tun->flags & TUN_NOCHECKSUM) == 0;
}
static int tun_set_rx_csum(struct net_device *dev, u32 data)
{
struct tun_struct *tun = netdev_priv(dev);
if (data)
tun->flags &= ~TUN_NOCHECKSUM;
else
tun->flags |= TUN_NOCHECKSUM;
return 0;
}
static const struct ethtool_ops tun_ethtool_ops = {
.get_settings = tun_get_settings,
.get_drvinfo = tun_get_drvinfo,
.get_msglevel = tun_get_msglevel,
.set_msglevel = tun_set_msglevel,
.get_link = tun_get_link,
.get_rx_csum = tun_get_rx_csum,
.set_rx_csum = tun_set_rx_csum
};
static int tun_init_net(struct net *net)
{
struct tun_net *tn;
tn = kmalloc(sizeof(*tn), GFP_KERNEL);
if (tn == NULL)
return -ENOMEM;
INIT_LIST_HEAD(&tn->dev_list);
if (net_assign_generic(net, tun_net_id, tn)) {
kfree(tn);
return -ENOMEM;
}
return 0;
}
static void tun_exit_net(struct net *net)
{
struct tun_net *tn;
struct tun_struct *tun, *nxt;
tn = net_generic(net, tun_net_id);
rtnl_lock();
list_for_each_entry_safe(tun, nxt, &tn->dev_list, list) {
DBG(KERN_INFO "%s cleaned up\n", tun->dev->name);
unregister_netdevice(tun->dev);
}
rtnl_unlock();
kfree(tn);
}
static struct pernet_operations tun_net_ops = {
.init = tun_init_net,
.exit = tun_exit_net,
};
static int __init tun_init(void)
{
int ret = 0;
printk(KERN_INFO "tun: %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
printk(KERN_INFO "tun: %s\n", DRV_COPYRIGHT);
ret = register_pernet_gen_device(&tun_net_id, &tun_net_ops);
if (ret) {
printk(KERN_ERR "tun: Can't register pernet ops\n");
goto err_pernet;
}
ret = misc_register(&tun_miscdev);
if (ret) {
printk(KERN_ERR "tun: Can't register misc device %d\n", TUN_MINOR);
goto err_misc;
}
return 0;
err_misc:
unregister_pernet_gen_device(tun_net_id, &tun_net_ops);
err_pernet:
return ret;
}
static void tun_cleanup(void)
{
misc_deregister(&tun_miscdev);
unregister_pernet_gen_device(tun_net_id, &tun_net_ops);
}
module_init(tun_init);
module_exit(tun_cleanup);
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(TUN_MINOR);