microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/pinctrl/freescale/pinctrl-imx6ul.c

359 строки
11 KiB
C
Исходник Обычный вид История

pinctrl: imx: add i.mx6ul subdriver Add i.MX6UL pinctrl driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-19 18:32:27 +03:00
/*
pinctrl: imx6ul: make it explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6UL drivers/pinctrl/freescale/Kconfig: bool "IMX6UL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Anson Huang <Anson.Huang@freescale.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-26 05:46:47 +03:00
* Freescale imx6ul pinctrl driver
*
* Author: Anson Huang <Anson.Huang@freescale.com>
pinctrl: imx: add i.mx6ul subdriver Add i.MX6UL pinctrl driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-19 18:32:27 +03:00
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pinctrl/pinctrl.h>
#include "pinctrl-imx.h"
enum imx6ul_pads {
MX6UL_PAD_RESERVE0 = 0,
MX6UL_PAD_RESERVE1 = 1,
MX6UL_PAD_RESERVE2 = 2,
MX6UL_PAD_RESERVE3 = 3,
MX6UL_PAD_RESERVE4 = 4,
MX6UL_PAD_RESERVE5 = 5,
MX6UL_PAD_RESERVE6 = 6,
MX6UL_PAD_RESERVE7 = 7,
MX6UL_PAD_RESERVE8 = 8,
MX6UL_PAD_RESERVE9 = 9,
MX6UL_PAD_RESERVE10 = 10,
MX6UL_PAD_SNVS_TAMPER4 = 11,
MX6UL_PAD_RESERVE12 = 12,
MX6UL_PAD_RESERVE13 = 13,
MX6UL_PAD_RESERVE14 = 14,
MX6UL_PAD_RESERVE15 = 15,
MX6UL_PAD_RESERVE16 = 16,
MX6UL_PAD_JTAG_MOD = 17,
MX6UL_PAD_JTAG_TMS = 18,
MX6UL_PAD_JTAG_TDO = 19,
MX6UL_PAD_JTAG_TDI = 20,
MX6UL_PAD_JTAG_TCK = 21,
MX6UL_PAD_JTAG_TRST_B = 22,
MX6UL_PAD_GPIO1_IO00 = 23,
MX6UL_PAD_GPIO1_IO01 = 24,
MX6UL_PAD_GPIO1_IO02 = 25,
MX6UL_PAD_GPIO1_IO03 = 26,
MX6UL_PAD_GPIO1_IO04 = 27,
MX6UL_PAD_GPIO1_IO05 = 28,
MX6UL_PAD_GPIO1_IO06 = 29,
MX6UL_PAD_GPIO1_IO07 = 30,
MX6UL_PAD_GPIO1_IO08 = 31,
MX6UL_PAD_GPIO1_IO09 = 32,
MX6UL_PAD_UART1_TX_DATA = 33,
MX6UL_PAD_UART1_RX_DATA = 34,
MX6UL_PAD_UART1_CTS_B = 35,
MX6UL_PAD_UART1_RTS_B = 36,
MX6UL_PAD_UART2_TX_DATA = 37,
MX6UL_PAD_UART2_RX_DATA = 38,
MX6UL_PAD_UART2_CTS_B = 39,
MX6UL_PAD_UART2_RTS_B = 40,
MX6UL_PAD_UART3_TX_DATA = 41,
MX6UL_PAD_UART3_RX_DATA = 42,
MX6UL_PAD_UART3_CTS_B = 43,
MX6UL_PAD_UART3_RTS_B = 44,
MX6UL_PAD_UART4_TX_DATA = 45,
MX6UL_PAD_UART4_RX_DATA = 46,
MX6UL_PAD_UART5_TX_DATA = 47,
MX6UL_PAD_UART5_RX_DATA = 48,
MX6UL_PAD_ENET1_RX_DATA0 = 49,
MX6UL_PAD_ENET1_RX_DATA1 = 50,
MX6UL_PAD_ENET1_RX_EN = 51,
MX6UL_PAD_ENET1_TX_DATA0 = 52,
MX6UL_PAD_ENET1_TX_DATA1 = 53,
MX6UL_PAD_ENET1_TX_EN = 54,
MX6UL_PAD_ENET1_TX_CLK = 55,
MX6UL_PAD_ENET1_RX_ER = 56,
MX6UL_PAD_ENET2_RX_DATA0 = 57,
MX6UL_PAD_ENET2_RX_DATA1 = 58,
MX6UL_PAD_ENET2_RX_EN = 59,
MX6UL_PAD_ENET2_TX_DATA0 = 60,
MX6UL_PAD_ENET2_TX_DATA1 = 61,
MX6UL_PAD_ENET2_TX_EN = 62,
MX6UL_PAD_ENET2_TX_CLK = 63,
MX6UL_PAD_ENET2_RX_ER = 64,
MX6UL_PAD_LCD_CLK = 65,
MX6UL_PAD_LCD_ENABLE = 66,
MX6UL_PAD_LCD_HSYNC = 67,
MX6UL_PAD_LCD_VSYNC = 68,
MX6UL_PAD_LCD_RESET = 69,
MX6UL_PAD_LCD_DATA00 = 70,
MX6UL_PAD_LCD_DATA01 = 71,
MX6UL_PAD_LCD_DATA02 = 72,
MX6UL_PAD_LCD_DATA03 = 73,
MX6UL_PAD_LCD_DATA04 = 74,
MX6UL_PAD_LCD_DATA05 = 75,
MX6UL_PAD_LCD_DATA06 = 76,
MX6UL_PAD_LCD_DATA07 = 77,
MX6UL_PAD_LCD_DATA08 = 78,
MX6UL_PAD_LCD_DATA09 = 79,
MX6UL_PAD_LCD_DATA10 = 80,
MX6UL_PAD_LCD_DATA11 = 81,
MX6UL_PAD_LCD_DATA12 = 82,
MX6UL_PAD_LCD_DATA13 = 83,
MX6UL_PAD_LCD_DATA14 = 84,
MX6UL_PAD_LCD_DATA15 = 85,
MX6UL_PAD_LCD_DATA16 = 86,
MX6UL_PAD_LCD_DATA17 = 87,
MX6UL_PAD_LCD_DATA18 = 88,
MX6UL_PAD_LCD_DATA19 = 89,
MX6UL_PAD_LCD_DATA20 = 90,
MX6UL_PAD_LCD_DATA21 = 91,
MX6UL_PAD_LCD_DATA22 = 92,
MX6UL_PAD_LCD_DATA23 = 93,
MX6UL_PAD_NAND_RE_B = 94,
MX6UL_PAD_NAND_WE_B = 95,
MX6UL_PAD_NAND_DATA00 = 96,
MX6UL_PAD_NAND_DATA01 = 97,
MX6UL_PAD_NAND_DATA02 = 98,
MX6UL_PAD_NAND_DATA03 = 99,
MX6UL_PAD_NAND_DATA04 = 100,
MX6UL_PAD_NAND_DATA05 = 101,
MX6UL_PAD_NAND_DATA06 = 102,
MX6UL_PAD_NAND_DATA07 = 103,
MX6UL_PAD_NAND_ALE = 104,
MX6UL_PAD_NAND_WP_B = 105,
MX6UL_PAD_NAND_READY_B = 106,
MX6UL_PAD_NAND_CE0_B = 107,
MX6UL_PAD_NAND_CE1_B = 108,
MX6UL_PAD_NAND_CLE = 109,
MX6UL_PAD_NAND_DQS = 110,
MX6UL_PAD_SD1_CMD = 111,
MX6UL_PAD_SD1_CLK = 112,
MX6UL_PAD_SD1_DATA0 = 113,
MX6UL_PAD_SD1_DATA1 = 114,
MX6UL_PAD_SD1_DATA2 = 115,
MX6UL_PAD_SD1_DATA3 = 116,
MX6UL_PAD_CSI_MCLK = 117,
MX6UL_PAD_CSI_PIXCLK = 118,
MX6UL_PAD_CSI_VSYNC = 119,
MX6UL_PAD_CSI_HSYNC = 120,
MX6UL_PAD_CSI_DATA00 = 121,
MX6UL_PAD_CSI_DATA01 = 122,
MX6UL_PAD_CSI_DATA02 = 123,
MX6UL_PAD_CSI_DATA03 = 124,
MX6UL_PAD_CSI_DATA04 = 125,
MX6UL_PAD_CSI_DATA05 = 126,
MX6UL_PAD_CSI_DATA06 = 127,
MX6UL_PAD_CSI_DATA07 = 128,
};
pinctrl: imx6ul: add IOMUXC SNVS pinctrl driver for i.MX 6ULL On i.MX 6ULL, the BOOT_MODEx and TAMPERx pin MUX and CTRL registers are available in a separate IOMUXC_SNVS module. Add support for the IOMUXC_SNVS module to the i.MX 6UL pinctrl driver. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-06 17:25:53 +03:00
enum imx6ull_lpsr_pads {
MX6ULL_PAD_BOOT_MODE0 = 0,
MX6ULL_PAD_BOOT_MODE1 = 1,
MX6ULL_PAD_SNVS_TAMPER0 = 2,
MX6ULL_PAD_SNVS_TAMPER1 = 3,
MX6ULL_PAD_SNVS_TAMPER2 = 4,
MX6ULL_PAD_SNVS_TAMPER3 = 5,
MX6ULL_PAD_SNVS_TAMPER4 = 6,
MX6ULL_PAD_SNVS_TAMPER5 = 7,
MX6ULL_PAD_SNVS_TAMPER6 = 8,
MX6ULL_PAD_SNVS_TAMPER7 = 9,
MX6ULL_PAD_SNVS_TAMPER8 = 10,
MX6ULL_PAD_SNVS_TAMPER9 = 11,
};
pinctrl: imx: add i.mx6ul subdriver Add i.MX6UL pinctrl driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-19 18:32:27 +03:00
/* Pad names for the pinmux subsystem */
static const struct pinctrl_pin_desc imx6ul_pinctrl_pads[] = {
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE0),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE1),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE2),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE3),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE4),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE5),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE6),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE7),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE8),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE9),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE10),
IMX_PINCTRL_PIN(MX6UL_PAD_SNVS_TAMPER4),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE12),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE13),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE14),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE15),
IMX_PINCTRL_PIN(MX6UL_PAD_RESERVE16),
IMX_PINCTRL_PIN(MX6UL_PAD_JTAG_MOD),
IMX_PINCTRL_PIN(MX6UL_PAD_JTAG_TMS),
IMX_PINCTRL_PIN(MX6UL_PAD_JTAG_TDO),
IMX_PINCTRL_PIN(MX6UL_PAD_JTAG_TDI),
IMX_PINCTRL_PIN(MX6UL_PAD_JTAG_TCK),
IMX_PINCTRL_PIN(MX6UL_PAD_JTAG_TRST_B),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO00),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO01),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO02),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO03),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO04),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO05),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO06),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO07),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO08),
IMX_PINCTRL_PIN(MX6UL_PAD_GPIO1_IO09),
IMX_PINCTRL_PIN(MX6UL_PAD_UART1_TX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART1_RX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART1_CTS_B),
IMX_PINCTRL_PIN(MX6UL_PAD_UART1_RTS_B),
IMX_PINCTRL_PIN(MX6UL_PAD_UART2_TX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART2_RX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART2_CTS_B),
IMX_PINCTRL_PIN(MX6UL_PAD_UART2_RTS_B),
IMX_PINCTRL_PIN(MX6UL_PAD_UART3_TX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART3_RX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART3_CTS_B),
IMX_PINCTRL_PIN(MX6UL_PAD_UART3_RTS_B),
IMX_PINCTRL_PIN(MX6UL_PAD_UART4_TX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART4_RX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART5_TX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_UART5_RX_DATA),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET1_RX_DATA0),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET1_RX_DATA1),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET1_RX_EN),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET1_TX_DATA0),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET1_TX_DATA1),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET1_TX_EN),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET1_TX_CLK),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET1_RX_ER),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET2_RX_DATA0),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET2_RX_DATA1),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET2_RX_EN),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET2_TX_DATA0),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET2_TX_DATA1),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET2_TX_EN),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET2_TX_CLK),
IMX_PINCTRL_PIN(MX6UL_PAD_ENET2_RX_ER),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_CLK),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_ENABLE),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_HSYNC),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_VSYNC),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_RESET),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA00),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA01),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA02),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA03),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA04),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA05),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA06),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA07),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA08),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA09),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA10),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA11),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA12),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA13),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA14),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA15),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA16),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA17),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA18),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA19),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA20),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA21),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA22),
IMX_PINCTRL_PIN(MX6UL_PAD_LCD_DATA23),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_RE_B),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_WE_B),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DATA00),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DATA01),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DATA02),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DATA03),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DATA04),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DATA05),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DATA06),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DATA07),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_ALE),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_WP_B),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_READY_B),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_CE0_B),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_CE1_B),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_CLE),
IMX_PINCTRL_PIN(MX6UL_PAD_NAND_DQS),
IMX_PINCTRL_PIN(MX6UL_PAD_SD1_CMD),
IMX_PINCTRL_PIN(MX6UL_PAD_SD1_CLK),
IMX_PINCTRL_PIN(MX6UL_PAD_SD1_DATA0),
IMX_PINCTRL_PIN(MX6UL_PAD_SD1_DATA1),
IMX_PINCTRL_PIN(MX6UL_PAD_SD1_DATA2),
IMX_PINCTRL_PIN(MX6UL_PAD_SD1_DATA3),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_MCLK),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_PIXCLK),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_VSYNC),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_HSYNC),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_DATA00),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_DATA01),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_DATA02),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_DATA03),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_DATA04),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_DATA05),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_DATA06),
IMX_PINCTRL_PIN(MX6UL_PAD_CSI_DATA07),
};
pinctrl: imx6ul: add IOMUXC SNVS pinctrl driver for i.MX 6ULL On i.MX 6ULL, the BOOT_MODEx and TAMPERx pin MUX and CTRL registers are available in a separate IOMUXC_SNVS module. Add support for the IOMUXC_SNVS module to the i.MX 6UL pinctrl driver. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-06 17:25:53 +03:00
/* pad for i.MX6ULL lpsr pinmux */
static const struct pinctrl_pin_desc imx6ull_snvs_pinctrl_pads[] = {
IMX_PINCTRL_PIN(MX6ULL_PAD_BOOT_MODE0),
IMX_PINCTRL_PIN(MX6ULL_PAD_BOOT_MODE1),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER0),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER1),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER2),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER3),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER4),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER5),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER6),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER7),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER8),
IMX_PINCTRL_PIN(MX6ULL_PAD_SNVS_TAMPER9),
};
static const struct imx_pinctrl_soc_info imx6ul_pinctrl_info = {
pinctrl: imx: add i.mx6ul subdriver Add i.MX6UL pinctrl driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-19 18:32:27 +03:00
.pins = imx6ul_pinctrl_pads,
.npins = ARRAY_SIZE(imx6ul_pinctrl_pads),
pinctrl: imx: attach iomuxc device to gpr syscon Commit bdb0066df96e ("mfd: syscon: Decouple syscon interface from platform devices") added the possibility to register syscon devices without associated platform device. This also removed regmap debugfs facilities, which don't work without a device. This patch associates the syscon regmap that handles the IOMUX controller's general purpose registers with the pinctrl device so that the GPR registers appear in the regmap debugfs directory again. For example, on i.MX6Q the GPR registers now can be read from /sys/kernel/debug/regmap/20e0000.iomuxc-gpr/registers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25 20:23:07 +03:00
.gpr_compatible = "fsl,imx6ul-iomuxc-gpr",
pinctrl: imx: add i.mx6ul subdriver Add i.MX6UL pinctrl driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-19 18:32:27 +03:00
};
pinctrl: imx6ul: add IOMUXC SNVS pinctrl driver for i.MX 6ULL On i.MX 6ULL, the BOOT_MODEx and TAMPERx pin MUX and CTRL registers are available in a separate IOMUXC_SNVS module. Add support for the IOMUXC_SNVS module to the i.MX 6UL pinctrl driver. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-06 17:25:53 +03:00
static const struct imx_pinctrl_soc_info imx6ull_snvs_pinctrl_info = {
.pins = imx6ull_snvs_pinctrl_pads,
.npins = ARRAY_SIZE(imx6ull_snvs_pinctrl_pads),
.flags = ZERO_OFFSET_VALID,
};
static const struct of_device_id imx6ul_pinctrl_of_match[] = {
{ .compatible = "fsl,imx6ul-iomuxc", .data = &imx6ul_pinctrl_info, },
{ .compatible = "fsl,imx6ull-iomuxc-snvs", .data = &imx6ull_snvs_pinctrl_info, },
pinctrl: imx: add i.mx6ul subdriver Add i.MX6UL pinctrl driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-19 18:32:27 +03:00
{ /* sentinel */ }
};
static int imx6ul_pinctrl_probe(struct platform_device *pdev)
{
pinctrl: imx6ul: add IOMUXC SNVS pinctrl driver for i.MX 6ULL On i.MX 6ULL, the BOOT_MODEx and TAMPERx pin MUX and CTRL registers are available in a separate IOMUXC_SNVS module. Add support for the IOMUXC_SNVS module to the i.MX 6UL pinctrl driver. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-06 17:25:53 +03:00
const struct imx_pinctrl_soc_info *pinctrl_info;
pinctrl_info = of_device_get_match_data(&pdev->dev);
if (!pinctrl_info)
return -ENODEV;
return imx_pinctrl_probe(pdev, pinctrl_info);
pinctrl: imx: add i.mx6ul subdriver Add i.MX6UL pinctrl driver support. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-19 18:32:27 +03:00
}
static struct platform_driver imx6ul_pinctrl_driver = {
.driver = {
.name = "imx6ul-pinctrl",
.of_match_table = of_match_ptr(imx6ul_pinctrl_of_match),
},
.probe = imx6ul_pinctrl_probe,
};
static int __init imx6ul_pinctrl_init(void)
{
return platform_driver_register(&imx6ul_pinctrl_driver);
}
arch_initcall(imx6ul_pinctrl_init);