WSL2-Linux-Kernel/sound/firewire/amdtp-stream.h

356 строки
10 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef SOUND_FIREWIRE_AMDTP_H_INCLUDED
#define SOUND_FIREWIRE_AMDTP_H_INCLUDED
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/sched.h>
#include <sound/asound.h>
#include "packets-buffer.h"
/**
* enum cip_flags - describes details of the streaming protocol
* @CIP_NONBLOCKING: In non-blocking mode, each packet contains
* sample_rate/8000 samples, with rounding up or down to adjust
* for clock skew and left-over fractional samples. This should
* be used if supported by the device.
* @CIP_BLOCKING: In blocking mode, each packet contains either zero or
* SYT_INTERVAL samples, with these two types alternating so that
* the overall sample rate comes out right.
* @CIP_EMPTY_WITH_TAG0: Only for in-stream. Empty in-packets have TAG0.
* @CIP_DBC_IS_END_EVENT: The value of dbc in an packet corresponds to the end
* of event in the packet. Out of IEC 61883.
* @CIP_WRONG_DBS: Only for in-stream. The value of dbs is wrong in in-packets.
* The value of data_block_quadlets is used instead of reported value.
* @CIP_SKIP_DBC_ZERO_CHECK: Only for in-stream. Packets with zero in dbc is
* skipped for detecting discontinuity.
* @CIP_EMPTY_HAS_WRONG_DBC: Only for in-stream. The value of dbc in empty
* packet is wrong but the others are correct.
* @CIP_JUMBO_PAYLOAD: Only for in-stream. The number of data blocks in an
* packet is larger than IEC 61883-6 defines. Current implementation
* allows 5 times as large as IEC 61883-6 defines.
* @CIP_HEADER_WITHOUT_EOH: Only for in-stream. CIP Header doesn't include
* valid EOH.
2017-03-31 16:06:07 +03:00
* @CIP_NO_HEADERS: a lack of headers in packets
* @CIP_UNALIGHED_DBC: Only for in-stream. The value of dbc is not alighed to
* the value of current SYT_INTERVAL; e.g. initial value is not zero.
* @CIP_UNAWARE_SYT: For outgoing packet, the value in SYT field of CIP is 0xffff.
* For incoming packet, the value in SYT field of CIP is not handled.
*/
enum cip_flags {
CIP_NONBLOCKING = 0x00,
CIP_BLOCKING = 0x01,
ALSA: firewire-lib: handle IT/IR contexts in each software interrupt context In clause 6.3 of IEC 61883-6:2000, there's an explanation about processing of presentation timestamp. In the clause, we can see "If a function block receives a CIP, processes it and subsequently re-transmits it, then the SYT of the outgoing CIP shall be the sum of the incoming SYT and the processing delay." ALSA firewire stack has an implementation to partly satisfy this specification. Developers assumed the stack to perform as an Audio function block[1]. Following to the assumption, current implementation of ALSA firewire stack use one software interrupt context to handle both of in/out packets. In most case, this is processed in 1394 OHCI IR context independently of the opposite context. Thus, this implementation uses longer CPU time in the software interrupt context. This is not better for whole system. Against the assumption, I confirmed that each ASIC for IEC 61883-1/6 doesn't necessarily expect it to the stack. Thus, current implementation of ALSA firewire stack includes over-engineering. This commit purges the implementation. As a result, packets of one direction are handled in one software interrupt context and spends minimum CPU time. [1] [alsa-devel] [PATCH 0/8] [RFC] new driver for Echo Audio's Fireworks based devices http://mailman.alsa-project.org/pipermail/alsa-devel/2013-June/062660.html Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-09 17:15:53 +03:00
CIP_EMPTY_WITH_TAG0 = 0x02,
CIP_DBC_IS_END_EVENT = 0x04,
CIP_WRONG_DBS = 0x08,
CIP_SKIP_DBC_ZERO_CHECK = 0x10,
CIP_EMPTY_HAS_WRONG_DBC = 0x20,
CIP_JUMBO_PAYLOAD = 0x40,
CIP_HEADER_WITHOUT_EOH = 0x80,
2017-03-31 16:06:07 +03:00
CIP_NO_HEADER = 0x100,
CIP_UNALIGHED_DBC = 0x200,
CIP_UNAWARE_SYT = 0x400,
};
/**
* enum cip_sfc - supported Sampling Frequency Codes (SFCs)
* @CIP_SFC_32000: 32,000 data blocks
* @CIP_SFC_44100: 44,100 data blocks
* @CIP_SFC_48000: 48,000 data blocks
* @CIP_SFC_88200: 88,200 data blocks
* @CIP_SFC_96000: 96,000 data blocks
* @CIP_SFC_176400: 176,400 data blocks
* @CIP_SFC_192000: 192,000 data blocks
* @CIP_SFC_COUNT: the number of supported SFCs
*
* These values are used to show nominal Sampling Frequency Code in
* Format Dependent Field (FDF) of AMDTP packet header. In IEC 61883-6:2002,
* this code means the number of events per second. Actually the code
* represents the number of data blocks transferred per second in an AMDTP
* stream.
*
* In IEC 61883-6:2005, some extensions were added to support more types of
* data such as 'One Bit LInear Audio', therefore the meaning of SFC became
* different depending on the types.
*
* Currently our implementation is compatible with IEC 61883-6:2002.
*/
enum cip_sfc {
CIP_SFC_32000 = 0,
CIP_SFC_44100 = 1,
CIP_SFC_48000 = 2,
CIP_SFC_88200 = 3,
CIP_SFC_96000 = 4,
CIP_SFC_176400 = 5,
CIP_SFC_192000 = 6,
CIP_SFC_COUNT
};
struct fw_unit;
struct fw_iso_context;
struct snd_pcm_substream;
struct snd_pcm_runtime;
enum amdtp_stream_direction {
AMDTP_OUT_STREAM = 0,
AMDTP_IN_STREAM
};
struct pkt_desc {
u32 cycle;
u32 syt;
unsigned int data_blocks;
unsigned int data_block_counter;
__be32 *ctx_payload;
};
struct amdtp_stream;
typedef unsigned int (*amdtp_stream_process_ctx_payloads_t)(
struct amdtp_stream *s,
const struct pkt_desc *desc,
unsigned int packets,
struct snd_pcm_substream *pcm);
struct amdtp_domain;
struct amdtp_stream {
struct fw_unit *unit;
// The combination of cip_flags enumeration-constants.
unsigned int flags;
enum amdtp_stream_direction direction;
struct mutex mutex;
/* For packet processing. */
struct fw_iso_context *context;
struct iso_packets_buffer buffer;
unsigned int queue_size;
int packet_index;
struct pkt_desc *pkt_descs;
2017-03-31 16:06:07 +03:00
int tag;
union {
struct {
unsigned int ctx_header_size;
// limit for payload of iso packet.
unsigned int max_ctx_payload_length;
// For quirks of CIP headers.
// Fixed interval of dbc between previos/current
// packets.
unsigned int dbc_interval;
// The device starts multiplexing events to the packet.
bool event_starts;
ALSA: firewire-lib: add replay target to cache sequence of packet In design of audio and music unit in IEEE 1394 bus, feedback of effective sampling transfer frequency (STF) is delivered by packets transferred from device. The devices supported by ALSA firewire stack are categorized to three groups regarding to it. * Group 1: * Echo Audio Fireworks board module * Oxford Semiconductor OXFW971 ASIC * Digidesign Digi00x family * Tascam FireWire series * RME Fireface series * Group 2: * BridgeCo. DM1000/DM1100/DM1500 ASICs for BeBoB solution * TC Applied Technologies DICE ASICs * Group 3: * Mark of the Unicord FireWire series In group 1, the effective STF is determined by the sequence of the number of events per packet. In group 2, the sequence of presentation timestamp expressed in syt field of CIP header is interpreted as well. In group 3, the presentation timestamp is expressed in source packet header (SPH) of each data block. I note that some models doesn't take care of effective STF with large internal buffer. It's reasonable to name it as group 0: * Group 0 * Oxford Semiconductor OXFW970 ASIC The effective STF is known to be slightly different from nominal STF for all of devices, and to be different between the devices. Furthermore, the effective STF is known to be shifted for long-period transmission. This makes it hard for software to satisfy the effective STF when processing packets to the device. The effective STF is deterministic as a result of analyzing the batch of packet transferred from the device. For the analysis, caching the sequence of parameter in the packet is required. This commit adds an option so that AMDTP domain structure takes AMDTP stream structure to cache the sequence of parameters in packet transferred from the device. The parameters are offset ticks of syt field against the cycle to receive the packet and the number of data blocks per packet. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210527122611.173711-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-27 15:26:09 +03:00
struct {
struct seq_desc *descs;
unsigned int size;
unsigned int tail;
} cache;
} tx;
struct {
// To generate CIP header.
unsigned int fdf;
// To generate constant hardware IRQ.
unsigned int event_count;
// To calculate CIP data blocks and tstamp.
struct {
struct seq_desc *descs;
unsigned int size;
unsigned int tail;
unsigned int head;
} seq;
unsigned int data_block_state;
unsigned int syt_offset_state;
unsigned int last_syt_offset;
ALSA: firewire-lib: replay sequence of incoming packets for outgoing packets ALSA IEC 61883-1/6 packet streaming engine uses pre-computed parameters ideal for nominal sampling transfer frequency (STF) to transfer packets to device since it was added 2011. As a result of user experience for a decade, it is clear that the sequence is not suitable to some actual devices. It takes the devices to generate noise, and causes any type of discontinuity in the series of packet transferred from the device. It's required for the engine to transfer packets according to effective STF. The effective STF is given by media clock recovered by the sequence of packet transferred from the target device. In the previous commit, the sequence is already cached. The media clock recovery can be achieved by analyzing the sequence. In technological world, many ideas are proposed for media clock recovery. However, the small part of them could be actually adopted in our case since floating point arithmetic is not mostly available in Linux kernel land. This commit adopts the simple way from them; sequence replay, which means that the sequence of parameters from incoming packet is used as is to transfer outgoing packets. The media clock is not computed internally, but the sequence of outgoing packet superficially looks to be generated by the media clock. The association between source and destination is decided when starting AMDTP domain. When the target device supports a pair of isochronous packet streams, the tx stream is source and the rx stream is destination. When it supports two pair of streams, each of tx stream is associated to corresponding rx stream in its order. When it supports less number of tx streams than rx streams, the fist tx stream is selected for all of rx streams. When it supports more tx streams than rx streams, the first tx packet is associated to the rx stream. As I noted in previous commit, the sequence of parameters from incoming packet is different between devices, time to time. It is worse idea to replay the sequence of parameters from a device for the sequence of packet to the other devices even if they are in the same category of device. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210527122611.173711-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-27 15:26:10 +03:00
struct amdtp_stream *replay_target;
unsigned int cache_head;
} rx;
} ctx_data;
/* For CIP headers. */
unsigned int source_node_id_field;
unsigned int data_block_quadlets;
unsigned int data_block_counter;
unsigned int sph;
unsigned int fmt;
// Internal flags.
unsigned int transfer_delay;
enum cip_sfc sfc;
unsigned int syt_interval;
/* For a PCM substream processing. */
struct snd_pcm_substream *pcm;
ALSA: firewire-lib: Fix stall of process context at packet error At Linux v3.5, packet processing can be done in process context of ALSA PCM application as well as software IRQ context for OHCI 1394. Below is an example of the callgraph (some calls are omitted). ioctl(2) with e.g. HWSYNC (sound/core/pcm_native.c) ->snd_pcm_common_ioctl1() ->snd_pcm_hwsync() ->snd_pcm_stream_lock_irq (sound/core/pcm_lib.c) ->snd_pcm_update_hw_ptr() ->snd_pcm_udpate_hw_ptr0() ->struct snd_pcm_ops.pointer() (sound/firewire/*) = Each handler on drivers in ALSA firewire stack (sound/firewire/amdtp-stream.c) ->amdtp_stream_pcm_pointer() (drivers/firewire/core-iso.c) ->fw_iso_context_flush_completions() ->struct fw_card_driver.flush_iso_completion() (drivers/firewire/ohci.c) = flush_iso_completions() ->struct fw_iso_context.callback.sc (sound/firewire/amdtp-stream.c) = in_stream_callback() or out_stream_callback() ->... ->snd_pcm_stream_unlock_irq When packet queueing error occurs or detecting invalid packets in 'in_stream_callback()' or 'out_stream_callback()', 'snd_pcm_stop_xrun()' is called on local CPU with disabled IRQ. (sound/firewire/amdtp-stream.c) in_stream_callback() or out_stream_callback() ->amdtp_stream_pcm_abort() ->snd_pcm_stop_xrun() ->snd_pcm_stream_lock_irqsave() ->snd_pcm_stop() ->snd_pcm_stream_unlock_irqrestore() The process is stalled on the CPU due to attempt to acquire recursive lock. [ 562.630853] INFO: rcu_sched detected stalls on CPUs/tasks: [ 562.630861] 2-...: (1 GPs behind) idle=37d/140000000000000/0 softirq=38323/38323 fqs=7140 [ 562.630862] (detected by 3, t=15002 jiffies, g=21036, c=21035, q=5933) [ 562.630866] Task dump for CPU 2: [ 562.630867] alsa-source-OXF R running task 0 6619 1 0x00000008 [ 562.630870] Call Trace: [ 562.630876] ? vt_console_print+0x79/0x3e0 [ 562.630880] ? msg_print_text+0x9d/0x100 [ 562.630883] ? up+0x32/0x50 [ 562.630885] ? irq_work_queue+0x8d/0xa0 [ 562.630886] ? console_unlock+0x2b6/0x4b0 [ 562.630888] ? vprintk_emit+0x312/0x4a0 [ 562.630892] ? dev_vprintk_emit+0xbf/0x230 [ 562.630895] ? do_sys_poll+0x37a/0x550 [ 562.630897] ? dev_printk_emit+0x4e/0x70 [ 562.630900] ? __dev_printk+0x3c/0x80 [ 562.630903] ? _raw_spin_lock+0x20/0x30 [ 562.630909] ? snd_pcm_stream_lock+0x31/0x50 [snd_pcm] [ 562.630914] ? _snd_pcm_stream_lock_irqsave+0x2e/0x40 [snd_pcm] [ 562.630918] ? snd_pcm_stop_xrun+0x16/0x70 [snd_pcm] [ 562.630922] ? in_stream_callback+0x3e6/0x450 [snd_firewire_lib] [ 562.630925] ? handle_ir_packet_per_buffer+0x8e/0x1a0 [firewire_ohci] [ 562.630928] ? ohci_flush_iso_completions+0xa3/0x130 [firewire_ohci] [ 562.630932] ? fw_iso_context_flush_completions+0x15/0x20 [firewire_core] [ 562.630935] ? amdtp_stream_pcm_pointer+0x2d/0x40 [snd_firewire_lib] [ 562.630938] ? pcm_capture_pointer+0x19/0x20 [snd_oxfw] [ 562.630943] ? snd_pcm_update_hw_ptr0+0x47/0x3d0 [snd_pcm] [ 562.630945] ? poll_select_copy_remaining+0x150/0x150 [ 562.630947] ? poll_select_copy_remaining+0x150/0x150 [ 562.630952] ? snd_pcm_update_hw_ptr+0x10/0x20 [snd_pcm] [ 562.630956] ? snd_pcm_hwsync+0x45/0xb0 [snd_pcm] [ 562.630960] ? snd_pcm_common_ioctl1+0x1ff/0xc90 [snd_pcm] [ 562.630962] ? futex_wake+0x90/0x170 [ 562.630966] ? snd_pcm_capture_ioctl1+0x136/0x260 [snd_pcm] [ 562.630970] ? snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm] [ 562.630972] ? do_vfs_ioctl+0xa3/0x610 [ 562.630974] ? vfs_read+0x11b/0x130 [ 562.630976] ? SyS_ioctl+0x79/0x90 [ 562.630978] ? entry_SYSCALL_64_fastpath+0x1e/0xad This commit fixes the above bug. This assumes two cases: 1. Any error is detected in software IRQ context of OHCI 1394 context. In this case, PCM substream should be aborted in packet handler. On the other hand, it should not be done in any process context. TO distinguish these two context, use 'in_interrupt()' macro. 2. Any error is detect in process context of ALSA PCM application. In this case, PCM substream should not be aborted in packet handler because PCM substream lock is acquired. The task to abort PCM substream should be done in ALSA PCM core. For this purpose, SNDRV_PCM_POS_XRUN is returned at 'struct snd_pcm_ops.pointer()'. Suggested-by: Clemens Ladisch <clemens@ladisch.de> Fixes: e9148dddc3c7("ALSA: firewire-lib: flush completed packets when reading PCM position") Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-11 10:08:21 +03:00
snd_pcm_uframes_t pcm_buffer_pointer;
unsigned int pcm_period_pointer;
ALSA: firewire-lib: Add support for MIDI capture/playback For capturing/playbacking MIDI messages, this commit adds one MIDI conformant data channel. This data channel has multiplexed 8 MIDI data streams. So this data channel can transfer messages from/to 8 MIDI ports. And this commit allows to set PCM format even if AMDTP streams already start. I suppose the case that PCM substreams are going to be joined into AMDTP streams when AMDTP streams are already started for MIDI substreams. Each driver must count how many PCM/MIDI substreams use AMDTP streams to stop AMDTP streams. There are differences between specifications about MIDI conformant data. About the multiplexing, IEC 61883-6:2002, itself, has no information. It describes labels and bytes for MIDI messages and refers to MMA/AMEI RP-027 for 'successfull implementation'. MMA/AMEI RP-027 describes 8 MPX-MIDI data streams for one MIDI conformant data channel. IEC 61883-6:2005 adds 'sequence multiplexing' and apply this way and describe incompatibility between 2002 and 2005. So this commit applies IEC 61883-6:2005. When we find some devices compliant to IEC 61883-6:2002, then this difference should be handles as device quirk in additional work. About the number of bytes in an MIDI conformant data, IEC 61883-6:2002 describe 0,1,2,3 bytes. MMA/AMEI RP-027 describes 'MIDI1.0-1x-SPEED', 'MIDI1.0-2x-SPEED', 'MIDI1.0-3x-SPEED' modes and the maximum bytes for each mode corresponds to 1, 2, 3 bytes. The 'MIDI1.0-2x/3x-SPEED' modes are accompanied with 'negotiation procedure' and 'encapsulation details' but there is no specifications for them. So this commit implements 'MIDI1.0-1x-SPEED' mode for playback, but allows to pick up 1-3 bytes for capturing. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 17:44:47 +04:00
// To start processing content of packets at the same cycle in several contexts for
// each direction.
bool ready_processing;
wait_queue_head_t ready_wait;
unsigned int next_cycle;
/* For backends to process data blocks. */
void *protocol;
amdtp_stream_process_ctx_payloads_t process_ctx_payloads;
// For domain.
int channel;
int speed;
struct list_head list;
struct amdtp_domain *domain;
};
int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit,
enum amdtp_stream_direction dir, unsigned int flags,
unsigned int fmt,
amdtp_stream_process_ctx_payloads_t process_ctx_payloads,
unsigned int protocol_size);
void amdtp_stream_destroy(struct amdtp_stream *s);
int amdtp_stream_set_parameters(struct amdtp_stream *s, unsigned int rate,
unsigned int data_block_quadlets);
unsigned int amdtp_stream_get_max_payload(struct amdtp_stream *s);
void amdtp_stream_update(struct amdtp_stream *s);
int amdtp_stream_add_pcm_hw_constraints(struct amdtp_stream *s,
struct snd_pcm_runtime *runtime);
void amdtp_stream_pcm_prepare(struct amdtp_stream *s);
void amdtp_stream_pcm_abort(struct amdtp_stream *s);
extern const unsigned int amdtp_syt_intervals[CIP_SFC_COUNT];
extern const unsigned int amdtp_rate_table[CIP_SFC_COUNT];
/**
* amdtp_stream_running - check stream is running or not
* @s: the AMDTP stream
*
* If this function returns true, the stream is running.
*/
static inline bool amdtp_stream_running(struct amdtp_stream *s)
{
return !IS_ERR(s->context);
}
/**
* amdtp_streaming_error - check for streaming error
* @s: the AMDTP stream
*
* If this function returns true, the stream's packet queue has stopped due to
* an asynchronous error.
*/
static inline bool amdtp_streaming_error(struct amdtp_stream *s)
{
return s->packet_index < 0;
}
ALSA: firewire-lib: Add support for MIDI capture/playback For capturing/playbacking MIDI messages, this commit adds one MIDI conformant data channel. This data channel has multiplexed 8 MIDI data streams. So this data channel can transfer messages from/to 8 MIDI ports. And this commit allows to set PCM format even if AMDTP streams already start. I suppose the case that PCM substreams are going to be joined into AMDTP streams when AMDTP streams are already started for MIDI substreams. Each driver must count how many PCM/MIDI substreams use AMDTP streams to stop AMDTP streams. There are differences between specifications about MIDI conformant data. About the multiplexing, IEC 61883-6:2002, itself, has no information. It describes labels and bytes for MIDI messages and refers to MMA/AMEI RP-027 for 'successfull implementation'. MMA/AMEI RP-027 describes 8 MPX-MIDI data streams for one MIDI conformant data channel. IEC 61883-6:2005 adds 'sequence multiplexing' and apply this way and describe incompatibility between 2002 and 2005. So this commit applies IEC 61883-6:2005. When we find some devices compliant to IEC 61883-6:2002, then this difference should be handles as device quirk in additional work. About the number of bytes in an MIDI conformant data, IEC 61883-6:2002 describe 0,1,2,3 bytes. MMA/AMEI RP-027 describes 'MIDI1.0-1x-SPEED', 'MIDI1.0-2x-SPEED', 'MIDI1.0-3x-SPEED' modes and the maximum bytes for each mode corresponds to 1, 2, 3 bytes. The 'MIDI1.0-2x/3x-SPEED' modes are accompanied with 'negotiation procedure' and 'encapsulation details' but there is no specifications for them. So this commit implements 'MIDI1.0-1x-SPEED' mode for playback, but allows to pick up 1-3 bytes for capturing. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 17:44:47 +04:00
/**
* amdtp_stream_pcm_running - check PCM substream is running or not
* @s: the AMDTP stream
*
* If this function returns true, PCM substream in the AMDTP stream is running.
*/
static inline bool amdtp_stream_pcm_running(struct amdtp_stream *s)
{
return !!s->pcm;
}
/**
* amdtp_stream_pcm_trigger - start/stop playback from a PCM device
* @s: the AMDTP stream
* @pcm: the PCM device to be started, or %NULL to stop the current device
*
* Call this function on a running isochronous stream to enable the actual
* transmission of PCM data. This function should be called from the PCM
* device's .trigger callback.
*/
static inline void amdtp_stream_pcm_trigger(struct amdtp_stream *s,
struct snd_pcm_substream *pcm)
{
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 00:07:29 +03:00
WRITE_ONCE(s->pcm, pcm);
}
static inline bool cip_sfc_is_base_44100(enum cip_sfc sfc)
{
return sfc & 1;
}
struct seq_desc {
unsigned int syt_offset;
unsigned int data_blocks;
};
struct amdtp_domain {
struct list_head streams;
unsigned int events_per_period;
unsigned int events_per_buffer;
struct amdtp_stream *irq_target;
struct {
unsigned int tx_init_skip;
unsigned int tx_start;
unsigned int rx_start;
} processing_cycle;
ALSA: firewire-lib: add replay target to cache sequence of packet In design of audio and music unit in IEEE 1394 bus, feedback of effective sampling transfer frequency (STF) is delivered by packets transferred from device. The devices supported by ALSA firewire stack are categorized to three groups regarding to it. * Group 1: * Echo Audio Fireworks board module * Oxford Semiconductor OXFW971 ASIC * Digidesign Digi00x family * Tascam FireWire series * RME Fireface series * Group 2: * BridgeCo. DM1000/DM1100/DM1500 ASICs for BeBoB solution * TC Applied Technologies DICE ASICs * Group 3: * Mark of the Unicord FireWire series In group 1, the effective STF is determined by the sequence of the number of events per packet. In group 2, the sequence of presentation timestamp expressed in syt field of CIP header is interpreted as well. In group 3, the presentation timestamp is expressed in source packet header (SPH) of each data block. I note that some models doesn't take care of effective STF with large internal buffer. It's reasonable to name it as group 0: * Group 0 * Oxford Semiconductor OXFW970 ASIC The effective STF is known to be slightly different from nominal STF for all of devices, and to be different between the devices. Furthermore, the effective STF is known to be shifted for long-period transmission. This makes it hard for software to satisfy the effective STF when processing packets to the device. The effective STF is deterministic as a result of analyzing the batch of packet transferred from the device. For the analysis, caching the sequence of parameter in the packet is required. This commit adds an option so that AMDTP domain structure takes AMDTP stream structure to cache the sequence of parameters in packet transferred from the device. The parameters are offset ticks of syt field against the cycle to receive the packet and the number of data blocks per packet. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210527122611.173711-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-27 15:26:09 +03:00
struct {
bool enable:1;
bool on_the_fly:1;
ALSA: firewire-lib: add replay target to cache sequence of packet In design of audio and music unit in IEEE 1394 bus, feedback of effective sampling transfer frequency (STF) is delivered by packets transferred from device. The devices supported by ALSA firewire stack are categorized to three groups regarding to it. * Group 1: * Echo Audio Fireworks board module * Oxford Semiconductor OXFW971 ASIC * Digidesign Digi00x family * Tascam FireWire series * RME Fireface series * Group 2: * BridgeCo. DM1000/DM1100/DM1500 ASICs for BeBoB solution * TC Applied Technologies DICE ASICs * Group 3: * Mark of the Unicord FireWire series In group 1, the effective STF is determined by the sequence of the number of events per packet. In group 2, the sequence of presentation timestamp expressed in syt field of CIP header is interpreted as well. In group 3, the presentation timestamp is expressed in source packet header (SPH) of each data block. I note that some models doesn't take care of effective STF with large internal buffer. It's reasonable to name it as group 0: * Group 0 * Oxford Semiconductor OXFW970 ASIC The effective STF is known to be slightly different from nominal STF for all of devices, and to be different between the devices. Furthermore, the effective STF is known to be shifted for long-period transmission. This makes it hard for software to satisfy the effective STF when processing packets to the device. The effective STF is deterministic as a result of analyzing the batch of packet transferred from the device. For the analysis, caching the sequence of parameter in the packet is required. This commit adds an option so that AMDTP domain structure takes AMDTP stream structure to cache the sequence of parameters in packet transferred from the device. The parameters are offset ticks of syt field against the cycle to receive the packet and the number of data blocks per packet. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210527122611.173711-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-27 15:26:09 +03:00
} replay;
};
int amdtp_domain_init(struct amdtp_domain *d);
void amdtp_domain_destroy(struct amdtp_domain *d);
int amdtp_domain_add_stream(struct amdtp_domain *d, struct amdtp_stream *s,
int channel, int speed);
int amdtp_domain_start(struct amdtp_domain *d, unsigned int tx_init_skip_cycles, bool replay_seq,
bool replay_on_the_fly);
void amdtp_domain_stop(struct amdtp_domain *d);
static inline int amdtp_domain_set_events_per_period(struct amdtp_domain *d,
unsigned int events_per_period,
unsigned int events_per_buffer)
{
d->events_per_period = events_per_period;
d->events_per_buffer = events_per_buffer;
return 0;
}
unsigned long amdtp_domain_stream_pcm_pointer(struct amdtp_domain *d,
struct amdtp_stream *s);
int amdtp_domain_stream_pcm_ack(struct amdtp_domain *d, struct amdtp_stream *s);
/**
* amdtp_domain_wait_ready - sleep till being ready to process packets or timeout
* @d: the AMDTP domain
* @timeout_ms: msec till timeout
*
* If this function return false, the AMDTP domain should be stopped.
*/
static inline bool amdtp_domain_wait_ready(struct amdtp_domain *d, unsigned int timeout_ms)
{
struct amdtp_stream *s;
list_for_each_entry(s, &d->streams, list) {
unsigned int j = msecs_to_jiffies(timeout_ms);
if (wait_event_interruptible_timeout(s->ready_wait, s->ready_processing, j) <= 0)
return false;
}
return true;
}
#endif