WSL2-Linux-Kernel/drivers/net/netdevsim/bus.c

399 строки
9.3 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2017 Netronome Systems, Inc.
* Copyright (C) 2019 Mellanox Technologies. All rights reserved
*/
#include <linux/device.h>
#include <linux/idr.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include "netdevsim.h"
static DEFINE_IDA(nsim_bus_dev_ids);
static LIST_HEAD(nsim_bus_dev_list);
static DEFINE_MUTEX(nsim_bus_dev_list_lock);
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
static bool nsim_bus_enable;
static struct nsim_bus_dev *to_nsim_bus_dev(struct device *dev)
{
return container_of(dev, struct nsim_bus_dev, dev);
}
static int nsim_bus_dev_vfs_enable(struct nsim_bus_dev *nsim_bus_dev,
unsigned int num_vfs)
{
nsim_bus_dev->vfconfigs = kcalloc(num_vfs,
sizeof(struct nsim_vf_config),
netdevsim: use __GFP_NOWARN to avoid memalloc warning vfnum buffer size and binary_len buffer size is received by user-space. So, this buffer size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the netdevsim module. So, this patch adds __GFP_NOWARN. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device echo 1000000000 > /sys/devices/netdevsim1/sriov_numvfs Splat looks like: [ 357.847266][ T1000] WARNING: CPU: 0 PID: 1000 at mm/page_alloc.c:4738 __alloc_pages_nodemask+0x2f3/0x740 [ 357.850273][ T1000] Modules linked in: netdevsim veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrx [ 357.852989][ T1000] CPU: 0 PID: 1000 Comm: bash Tainted: G B 5.5.0-rc5+ #270 [ 357.854334][ T1000] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 357.855703][ T1000] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 357.856669][ T1000] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 357.860272][ T1000] RSP: 0018:ffff8880b7f47bd8 EFLAGS: 00010246 [ 357.861009][ T1000] RAX: ffffed1016fe8f80 RBX: 1ffff11016fe8fae RCX: 0000000000000000 [ 357.861843][ T1000] RDX: 0000000000000000 RSI: 0000000000000017 RDI: 0000000000000000 [ 357.862661][ T1000] RBP: 0000000000040dc0 R08: 1ffff11016fe8f67 R09: dffffc0000000000 [ 357.863509][ T1000] R10: ffff8880b7f47d68 R11: fffffbfff2798180 R12: 1ffff11016fe8f80 [ 357.864355][ T1000] R13: 0000000000000017 R14: 0000000000000017 R15: ffff8880c2038d68 [ 357.865178][ T1000] FS: 00007fd9a5b8c740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 357.866248][ T1000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 357.867531][ T1000] CR2: 000055ce01ba8100 CR3: 00000000b7dbe005 CR4: 00000000000606f0 [ 357.868972][ T1000] Call Trace: [ 357.869423][ T1000] ? lock_contended+0xcd0/0xcd0 [ 357.870001][ T1000] ? __alloc_pages_slowpath+0x21d0/0x21d0 [ 357.870673][ T1000] ? _kstrtoull+0x76/0x160 [ 357.871148][ T1000] ? alloc_pages_current+0xc1/0x1a0 [ 357.871704][ T1000] kmalloc_order+0x22/0x80 [ 357.872184][ T1000] kmalloc_order_trace+0x1d/0x140 [ 357.872733][ T1000] __kmalloc+0x302/0x3a0 [ 357.873204][ T1000] nsim_bus_dev_numvfs_store+0x1ab/0x260 [netdevsim] [ 357.873919][ T1000] ? kernfs_get_active+0x12c/0x180 [ 357.874459][ T1000] ? new_device_store+0x450/0x450 [netdevsim] [ 357.875111][ T1000] ? kernfs_get_parent+0x70/0x70 [ 357.875632][ T1000] ? sysfs_file_ops+0x160/0x160 [ 357.876152][ T1000] kernfs_fop_write+0x276/0x410 [ 357.876680][ T1000] ? __sb_start_write+0x1ba/0x2e0 [ 357.877225][ T1000] vfs_write+0x197/0x4a0 [ 357.877671][ T1000] ksys_write+0x141/0x1d0 [ ... ] Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: 79579220566c ("netdevsim: add SR-IOV functionality") Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:43:39 +03:00
GFP_KERNEL | __GFP_NOWARN);
if (!nsim_bus_dev->vfconfigs)
return -ENOMEM;
nsim_bus_dev->num_vfs = num_vfs;
return 0;
}
static void nsim_bus_dev_vfs_disable(struct nsim_bus_dev *nsim_bus_dev)
{
kfree(nsim_bus_dev->vfconfigs);
nsim_bus_dev->vfconfigs = NULL;
nsim_bus_dev->num_vfs = 0;
}
static ssize_t
nsim_bus_dev_numvfs_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct nsim_bus_dev *nsim_bus_dev = to_nsim_bus_dev(dev);
unsigned int num_vfs;
int ret;
ret = kstrtouint(buf, 0, &num_vfs);
if (ret)
return ret;
rtnl_lock();
if (nsim_bus_dev->num_vfs == num_vfs)
goto exit_good;
if (nsim_bus_dev->num_vfs && num_vfs) {
ret = -EBUSY;
goto exit_unlock;
}
if (num_vfs) {
ret = nsim_bus_dev_vfs_enable(nsim_bus_dev, num_vfs);
if (ret)
goto exit_unlock;
} else {
nsim_bus_dev_vfs_disable(nsim_bus_dev);
}
exit_good:
ret = count;
exit_unlock:
rtnl_unlock();
return ret;
}
static ssize_t
nsim_bus_dev_numvfs_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct nsim_bus_dev *nsim_bus_dev = to_nsim_bus_dev(dev);
return sprintf(buf, "%u\n", nsim_bus_dev->num_vfs);
}
static struct device_attribute nsim_bus_dev_numvfs_attr =
__ATTR(sriov_numvfs, 0664, nsim_bus_dev_numvfs_show,
nsim_bus_dev_numvfs_store);
static ssize_t
new_port_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct nsim_bus_dev *nsim_bus_dev = to_nsim_bus_dev(dev);
netdevsim: disable devlink reload when resources are being used devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:43:04 +03:00
struct nsim_dev *nsim_dev = dev_get_drvdata(dev);
struct devlink *devlink;
unsigned int port_index;
int ret;
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
/* Prevent to use nsim_bus_dev before initialization. */
if (!smp_load_acquire(&nsim_bus_dev->init))
return -EBUSY;
ret = kstrtouint(buf, 0, &port_index);
if (ret)
return ret;
netdevsim: disable devlink reload when resources are being used devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:43:04 +03:00
devlink = priv_to_devlink(nsim_dev);
mutex_lock(&nsim_bus_dev->nsim_bus_reload_lock);
devlink_reload_disable(devlink);
ret = nsim_dev_port_add(nsim_bus_dev, port_index);
netdevsim: disable devlink reload when resources are being used devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:43:04 +03:00
devlink_reload_enable(devlink);
mutex_unlock(&nsim_bus_dev->nsim_bus_reload_lock);
return ret ? ret : count;
}
static struct device_attribute nsim_bus_dev_new_port_attr = __ATTR_WO(new_port);
static ssize_t
del_port_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct nsim_bus_dev *nsim_bus_dev = to_nsim_bus_dev(dev);
netdevsim: disable devlink reload when resources are being used devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:43:04 +03:00
struct nsim_dev *nsim_dev = dev_get_drvdata(dev);
struct devlink *devlink;
unsigned int port_index;
int ret;
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
/* Prevent to use nsim_bus_dev before initialization. */
if (!smp_load_acquire(&nsim_bus_dev->init))
return -EBUSY;
ret = kstrtouint(buf, 0, &port_index);
if (ret)
return ret;
netdevsim: disable devlink reload when resources are being used devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:43:04 +03:00
devlink = priv_to_devlink(nsim_dev);
mutex_lock(&nsim_bus_dev->nsim_bus_reload_lock);
devlink_reload_disable(devlink);
ret = nsim_dev_port_del(nsim_bus_dev, port_index);
netdevsim: disable devlink reload when resources are being used devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:43:04 +03:00
devlink_reload_enable(devlink);
mutex_unlock(&nsim_bus_dev->nsim_bus_reload_lock);
return ret ? ret : count;
}
static struct device_attribute nsim_bus_dev_del_port_attr = __ATTR_WO(del_port);
static struct attribute *nsim_bus_dev_attrs[] = {
&nsim_bus_dev_numvfs_attr.attr,
&nsim_bus_dev_new_port_attr.attr,
&nsim_bus_dev_del_port_attr.attr,
NULL,
};
static const struct attribute_group nsim_bus_dev_attr_group = {
.attrs = nsim_bus_dev_attrs,
};
static const struct attribute_group *nsim_bus_dev_attr_groups[] = {
&nsim_bus_dev_attr_group,
NULL,
};
static void nsim_bus_dev_release(struct device *dev)
{
struct nsim_bus_dev *nsim_bus_dev = to_nsim_bus_dev(dev);
nsim_bus_dev_vfs_disable(nsim_bus_dev);
}
static struct device_type nsim_bus_dev_type = {
.groups = nsim_bus_dev_attr_groups,
.release = nsim_bus_dev_release,
};
static struct nsim_bus_dev *
nsim_bus_dev_new(unsigned int id, unsigned int port_count);
static ssize_t
new_device_store(struct bus_type *bus, const char *buf, size_t count)
{
struct nsim_bus_dev *nsim_bus_dev;
unsigned int port_count;
unsigned int id;
int err;
err = sscanf(buf, "%u %u", &id, &port_count);
switch (err) {
case 1:
port_count = 1;
/* fall through */
case 2:
if (id > INT_MAX) {
pr_err("Value of \"id\" is too big.\n");
return -EINVAL;
}
break;
default:
pr_err("Format for adding new device is \"id port_count\" (uint uint).\n");
return -EINVAL;
}
mutex_lock(&nsim_bus_dev_list_lock);
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
/* Prevent to use resource before initialization. */
if (!smp_load_acquire(&nsim_bus_enable)) {
err = -EBUSY;
goto err;
}
nsim_bus_dev = nsim_bus_dev_new(id, port_count);
if (IS_ERR(nsim_bus_dev)) {
err = PTR_ERR(nsim_bus_dev);
goto err;
}
/* Allow using nsim_bus_dev */
smp_store_release(&nsim_bus_dev->init, true);
list_add_tail(&nsim_bus_dev->list, &nsim_bus_dev_list);
mutex_unlock(&nsim_bus_dev_list_lock);
return count;
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
err:
mutex_unlock(&nsim_bus_dev_list_lock);
return err;
}
static BUS_ATTR_WO(new_device);
static void nsim_bus_dev_del(struct nsim_bus_dev *nsim_bus_dev);
static ssize_t
del_device_store(struct bus_type *bus, const char *buf, size_t count)
{
struct nsim_bus_dev *nsim_bus_dev, *tmp;
unsigned int id;
int err;
err = sscanf(buf, "%u", &id);
switch (err) {
case 1:
if (id > INT_MAX) {
pr_err("Value of \"id\" is too big.\n");
return -EINVAL;
}
break;
default:
pr_err("Format for deleting device is \"id\" (uint).\n");
return -EINVAL;
}
err = -ENOENT;
mutex_lock(&nsim_bus_dev_list_lock);
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
/* Prevent to use resource before initialization. */
if (!smp_load_acquire(&nsim_bus_enable)) {
mutex_unlock(&nsim_bus_dev_list_lock);
return -EBUSY;
}
list_for_each_entry_safe(nsim_bus_dev, tmp, &nsim_bus_dev_list, list) {
if (nsim_bus_dev->dev.id != id)
continue;
list_del(&nsim_bus_dev->list);
nsim_bus_dev_del(nsim_bus_dev);
err = 0;
break;
}
mutex_unlock(&nsim_bus_dev_list_lock);
return !err ? count : err;
}
static BUS_ATTR_WO(del_device);
static struct attribute *nsim_bus_attrs[] = {
&bus_attr_new_device.attr,
&bus_attr_del_device.attr,
NULL
};
ATTRIBUTE_GROUPS(nsim_bus);
static int nsim_bus_probe(struct device *dev)
{
struct nsim_bus_dev *nsim_bus_dev = to_nsim_bus_dev(dev);
return nsim_dev_probe(nsim_bus_dev);
}
static int nsim_bus_remove(struct device *dev)
{
struct nsim_bus_dev *nsim_bus_dev = to_nsim_bus_dev(dev);
nsim_dev_remove(nsim_bus_dev);
return 0;
}
static int nsim_num_vf(struct device *dev)
{
struct nsim_bus_dev *nsim_bus_dev = to_nsim_bus_dev(dev);
return nsim_bus_dev->num_vfs;
}
static struct bus_type nsim_bus = {
.name = DRV_NAME,
.dev_name = DRV_NAME,
.bus_groups = nsim_bus_groups,
.probe = nsim_bus_probe,
.remove = nsim_bus_remove,
.num_vf = nsim_num_vf,
};
static struct nsim_bus_dev *
nsim_bus_dev_new(unsigned int id, unsigned int port_count)
{
struct nsim_bus_dev *nsim_bus_dev;
int err;
nsim_bus_dev = kzalloc(sizeof(*nsim_bus_dev), GFP_KERNEL);
if (!nsim_bus_dev)
return ERR_PTR(-ENOMEM);
err = ida_alloc_range(&nsim_bus_dev_ids, id, id, GFP_KERNEL);
if (err < 0)
goto err_nsim_bus_dev_free;
nsim_bus_dev->dev.id = err;
nsim_bus_dev->dev.bus = &nsim_bus;
nsim_bus_dev->dev.type = &nsim_bus_dev_type;
nsim_bus_dev->port_count = port_count;
nsim_bus_dev->initial_net = current->nsproxy->net_ns;
netdevsim: disable devlink reload when resources are being used devlink reload destroys resources and allocates resources again. So, when devices and ports resources are being used, devlink reload function should not be executed. In order to avoid this race, a new lock is added and new_port() and del_port() call devlink_reload_disable() and devlink_reload_enable(). Thread0 Thread1 {new/del}_port() {new/del}_port() devlink_reload_disable() devlink_reload_disable() devlink_reload_enable() //here devlink_reload_enable() Before Thread1's devlink_reload_enable(), the devlink is already allowed to execute reload because Thread0 allows it. devlink reload disable/enable variable type is bool. So the above case would exist. So, disable/enable should be executed atomically. In order to do that, a new lock is used. Test commands: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device while : do echo 1 > /sys/devices/netdevsim1/new_port & echo 1 > /sys/devices/netdevsim1/del_port & devlink dev reload netdevsim/netdevsim1 & done Splat looks like: [ 23.342145][ T932] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) [ 23.342159][ T932] WARNING: CPU: 0 PID: 932 at kernel/locking/mutex-debug.c:103 mutex_destroy+0xc7/0xf0 [ 23.344182][ T932] Modules linked in: netdevsim openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_dx [ 23.346485][ T932] CPU: 0 PID: 932 Comm: devlink Not tainted 5.5.0+ #322 [ 23.347696][ T932] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.348893][ T932] RIP: 0010:mutex_destroy+0xc7/0xf0 [ 23.349505][ T932] Code: e0 07 83 c0 03 38 d0 7c 04 84 d2 75 2e 8b 05 00 ac b0 02 85 c0 75 8b 48 c7 c6 00 5e 07 96 40 [ 23.351887][ T932] RSP: 0018:ffff88806208f810 EFLAGS: 00010286 [ 23.353963][ T932] RAX: dffffc0000000008 RBX: ffff888067f6f2c0 RCX: ffffffff942c4bd4 [ 23.355222][ T932] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff96dac5b4 [ 23.356169][ T932] RBP: ffff888067f6f000 R08: fffffbfff2d235a5 R09: fffffbfff2d235a5 [ 23.357160][ T932] R10: 0000000000000001 R11: fffffbfff2d235a4 R12: ffff888067f6f208 [ 23.358288][ T932] R13: ffff88806208fa70 R14: ffff888067f6f000 R15: ffff888069ce3800 [ 23.359307][ T932] FS: 00007fe2a3876740(0000) GS:ffff88806c000000(0000) knlGS:0000000000000000 [ 23.360473][ T932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.361319][ T932] CR2: 00005561357aa000 CR3: 000000005227a006 CR4: 00000000000606f0 [ 23.362323][ T932] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.363417][ T932] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.364414][ T932] Call Trace: [ 23.364828][ T932] nsim_dev_reload_destroy+0x77/0xb0 [netdevsim] [ 23.365655][ T932] nsim_dev_reload_down+0x84/0xb0 [netdevsim] [ 23.366433][ T932] devlink_reload+0xb1/0x350 [ 23.367010][ T932] genl_rcv_msg+0x580/0xe90 [ ...] [ 23.531729][ T1305] kernel BUG at lib/list_debug.c:53! [ 23.532523][ T1305] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 23.533467][ T1305] CPU: 2 PID: 1305 Comm: bash Tainted: G W 5.5.0+ #322 [ 23.534962][ T1305] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 23.536503][ T1305] RIP: 0010:__list_del_entry_valid+0xe6/0x150 [ 23.538346][ T1305] Code: 89 ea 48 c7 c7 00 73 1e 96 e8 df f7 4c ff 0f 0b 48 c7 c7 60 73 1e 96 e8 d1 f7 4c ff 0f 0b 44 [ 23.541068][ T1305] RSP: 0018:ffff888047c27b58 EFLAGS: 00010282 [ 23.542001][ T1305] RAX: 0000000000000054 RBX: ffff888067f6f318 RCX: 0000000000000000 [ 23.543051][ T1305] RDX: 0000000000000054 RSI: 0000000000000008 RDI: ffffed1008f84f61 [ 23.544072][ T1305] RBP: ffff88804aa0fca0 R08: ffffed100d940539 R09: ffffed100d940539 [ 23.545085][ T1305] R10: 0000000000000001 R11: ffffed100d940538 R12: ffff888047c27cb0 [ 23.546422][ T1305] R13: ffff88806208b840 R14: ffffffff981976c0 R15: ffff888067f6f2c0 [ 23.547406][ T1305] FS: 00007f76c0431740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 23.548527][ T1305] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.549389][ T1305] CR2: 00007f5048f1a2f8 CR3: 000000004b310006 CR4: 00000000000606e0 [ 23.550636][ T1305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.551578][ T1305] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.552597][ T1305] Call Trace: [ 23.553004][ T1305] mutex_remove_waiter+0x101/0x520 [ 23.553646][ T1305] __mutex_lock+0xac7/0x14b0 [ 23.554218][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.554908][ T1305] ? mutex_lock_io_nested+0x1380/0x1380 [ 23.555570][ T1305] ? _parse_integer+0xf0/0xf0 [ 23.556043][ T1305] ? kstrtouint+0x86/0x110 [ 23.556504][ T1305] ? nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.557133][ T1305] nsim_dev_port_del+0x4e/0x140 [netdevsim] [ 23.558024][ T1305] del_port_store+0xcc/0xf0 [netdevsim] [ ... ] Fixes: 75ba029f3c07 ("netdevsim: implement proper devlink reload") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:43:04 +03:00
mutex_init(&nsim_bus_dev->nsim_bus_reload_lock);
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
/* Disallow using nsim_bus_dev */
smp_store_release(&nsim_bus_dev->init, false);
err = device_register(&nsim_bus_dev->dev);
if (err)
goto err_nsim_bus_dev_id_free;
return nsim_bus_dev;
err_nsim_bus_dev_id_free:
ida_free(&nsim_bus_dev_ids, nsim_bus_dev->dev.id);
err_nsim_bus_dev_free:
kfree(nsim_bus_dev);
return ERR_PTR(err);
}
static void nsim_bus_dev_del(struct nsim_bus_dev *nsim_bus_dev)
{
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
/* Disallow using nsim_bus_dev */
smp_store_release(&nsim_bus_dev->init, false);
device_unregister(&nsim_bus_dev->dev);
ida_free(&nsim_bus_dev_ids, nsim_bus_dev->dev.id);
kfree(nsim_bus_dev);
}
static struct device_driver nsim_driver = {
.name = DRV_NAME,
.bus = &nsim_bus,
.owner = THIS_MODULE,
};
int nsim_bus_init(void)
{
int err;
err = bus_register(&nsim_bus);
if (err)
return err;
err = driver_register(&nsim_driver);
if (err)
goto err_bus_unregister;
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
/* Allow using resources */
smp_store_release(&nsim_bus_enable, true);
return 0;
err_bus_unregister:
bus_unregister(&nsim_bus);
return err;
}
void nsim_bus_exit(void)
{
struct nsim_bus_dev *nsim_bus_dev, *tmp;
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
/* Disallow using resources */
smp_store_release(&nsim_bus_enable, false);
mutex_lock(&nsim_bus_dev_list_lock);
list_for_each_entry_safe(nsim_bus_dev, tmp, &nsim_bus_dev_list, list) {
list_del(&nsim_bus_dev->list);
nsim_bus_dev_del(nsim_bus_dev);
}
mutex_unlock(&nsim_bus_dev_list_lock);
netdevsim: fix using uninitialized resources When module is being initialized, __init() calls bus_register() and driver_register(). These functions internally create various resources and sysfs files. The sysfs files are used for basic operations(add/del device). /sys/bus/netdevsim/new_device /sys/bus/netdevsim/del_device These sysfs files use netdevsim resources, they are mostly allocated and initialized in ->probe() function, which is nsim_dev_probe(). But, sysfs files could be executed before ->probe() is finished. So, accessing uninitialized data would occur. Another problem is very similar. /sys/bus/netdevsim/new_device internally creates sysfs files. /sys/devices/netdevsim<id>/new_port /sys/devices/netdevsim<id>/del_port These sysfs files also use netdevsim resources, they are mostly allocated and initialized in creating device routine, which is nsim_bus_dev_new(). But they also could be executed before nsim_bus_dev_new() is finished. So, accessing uninitialized data would occur. To fix these problems, this patch adds flags, which means whether the operation is finished or not. The flag variable 'nsim_bus_enable' means whether netdevsim bus was initialized or not. This is protected by nsim_bus_dev_list_lock. The flag variable 'nsim_bus_dev->init' means whether nsim_bus_dev was initialized or not. This could be used in {new/del}_port_store() with no lock. Test commands: #SHELL1 modprobe netdevsim while : do echo "1 1" > /sys/bus/netdevsim/new_device echo "1 1" > /sys/bus/netdevsim/del_device done #SHELL2 while : do echo 1 > /sys/devices/netdevsim1/new_port echo 1 > /sys/devices/netdevsim1/del_port done Splat looks like: [ 47.508954][ T1008] general protection fault, probably for non-canonical address 0xdffffc0000000021: 0000 I [ 47.510793][ T1008] KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] [ 47.511963][ T1008] CPU: 2 PID: 1008 Comm: bash Not tainted 5.5.0+ #322 [ 47.512823][ T1008] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 47.514041][ T1008] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 47.514699][ T1008] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 47.517163][ T1008] RSP: 0018:ffff888059b4fbb0 EFLAGS: 00010206 [ 47.517802][ T1008] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 47.518941][ T1008] RDX: 0000000000000021 RSI: ffffffff85926440 RDI: 0000000000000108 [ 47.519732][ T1008] RBP: ffff888059b4fd30 R08: ffffffffc073fad0 R09: 0000000000000000 [ 47.520729][ T1008] R10: ffff888059b4fd50 R11: ffff88804bb38040 R12: 0000000000000000 [ 47.521702][ T1008] R13: dffffc0000000000 R14: ffffffff871976c0 R15: 00000000000000a0 [ 47.522760][ T1008] FS: 00007fd4be05a740(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 47.523877][ T1008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.524627][ T1008] CR2: 0000561c82b69cf0 CR3: 0000000065dd6004 CR4: 00000000000606e0 [ 47.527662][ T1008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.528604][ T1008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.529531][ T1008] Call Trace: [ 47.529874][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.530470][ T1008] ? mutex_lock_io_nested+0x1380/0x1380 [ 47.531018][ T1008] ? _kstrtoull+0x76/0x160 [ 47.531449][ T1008] ? _parse_integer+0xf0/0xf0 [ 47.531874][ T1008] ? kernfs_fop_write+0x1cf/0x410 [ 47.532330][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.532773][ T1008] ? kstrtouint+0x86/0x110 [ 47.533168][ T1008] ? nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.533721][ T1008] nsim_dev_port_add+0x50/0x150 [netdevsim] [ 47.534336][ T1008] ? sysfs_file_ops+0x160/0x160 [ 47.534858][ T1008] new_port_store+0x99/0xb0 [netdevsim] [ 47.535439][ T1008] ? del_port_store+0xb0/0xb0 [netdevsim] [ 47.536035][ T1008] ? sysfs_file_ops+0x112/0x160 [ 47.536544][ T1008] ? sysfs_kf_write+0x3b/0x180 [ 47.537029][ T1008] kernfs_fop_write+0x276/0x410 [ 47.537548][ T1008] ? __sb_start_write+0x215/0x2e0 [ 47.538110][ T1008] vfs_write+0x197/0x4a0 [ ... ] Fixes: f9d9db47d3ba ("netdevsim: add bus attributes to add new and delete devices") Fixes: 794b2c05ca1c ("netdevsim: extend device attrs to support port addition and deletion") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01 19:42:54 +03:00
driver_unregister(&nsim_driver);
bus_unregister(&nsim_bus);
}