WSL2-Linux-Kernel/net/mac80211/main.c

1944 строки
54 KiB
C
Исходник Обычный вид История

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <net/mac80211.h>
#include <net/ieee80211_radiotap.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/wireless.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 22:56:21 +04:00
#include <net/net_namespace.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "rate.h"
#include "mesh.h"
#include "wep.h"
#include "wme.h"
#include "aes_ccm.h"
#include "led.h"
#include "cfg.h"
#include "debugfs.h"
#include "debugfs_netdev.h"
/*
* For seeing transmitted packets on monitor interfaces
* we have a radiotap header too.
*/
struct ieee80211_tx_status_rtap_hdr {
struct ieee80211_radiotap_header hdr;
__le16 tx_flags;
u8 data_retries;
} __attribute__ ((packed));
/* common interface routines */
static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
{
memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
return ETH_ALEN;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
/* must be called under mdev tx lock */
static void ieee80211_configure_filter(struct ieee80211_local *local)
{
unsigned int changed_flags;
unsigned int new_flags = 0;
if (atomic_read(&local->iff_promiscs))
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
new_flags |= FIF_PROMISC_IN_BSS;
if (atomic_read(&local->iff_allmultis))
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
new_flags |= FIF_ALLMULTI;
if (local->monitors)
new_flags |= FIF_BCN_PRBRESP_PROMISC;
if (local->fif_fcsfail)
new_flags |= FIF_FCSFAIL;
if (local->fif_plcpfail)
new_flags |= FIF_PLCPFAIL;
if (local->fif_control)
new_flags |= FIF_CONTROL;
if (local->fif_other_bss)
new_flags |= FIF_OTHER_BSS;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
changed_flags = local->filter_flags ^ new_flags;
/* be a bit nasty */
new_flags |= (1<<31);
local->ops->configure_filter(local_to_hw(local),
changed_flags, &new_flags,
local->mdev->mc_count,
local->mdev->mc_list);
WARN_ON(new_flags & (1<<31));
local->filter_flags = new_flags & ~(1<<31);
}
/* master interface */
static int ieee80211_master_open(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata;
int res = -EOPNOTSUPP;
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->dev != dev && netif_running(sdata->dev)) {
res = 0;
break;
}
}
if (res)
return res;
netif_start_queue(local->mdev);
return 0;
}
static int ieee80211_master_stop(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata;
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(sdata, &local->interfaces, list)
if (sdata->dev != dev && netif_running(sdata->dev))
dev_close(sdata->dev);
return 0;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
static void ieee80211_master_set_multicast_list(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
ieee80211_configure_filter(local);
}
/* regular interfaces */
static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
{
int meshhdrlen;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
meshhdrlen = (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) ? 5 : 0;
/* FIX: what would be proper limits for MTU?
* This interface uses 802.3 frames. */
if (new_mtu < 256 ||
new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
printk(KERN_WARNING "%s: invalid MTU %d\n",
dev->name, new_mtu);
return -EINVAL;
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
dev->mtu = new_mtu;
return 0;
}
static inline int identical_mac_addr_allowed(int type1, int type2)
{
return (type1 == IEEE80211_IF_TYPE_MNTR ||
type2 == IEEE80211_IF_TYPE_MNTR ||
(type1 == IEEE80211_IF_TYPE_AP &&
type2 == IEEE80211_IF_TYPE_WDS) ||
(type1 == IEEE80211_IF_TYPE_WDS &&
(type2 == IEEE80211_IF_TYPE_WDS ||
type2 == IEEE80211_IF_TYPE_AP)) ||
(type1 == IEEE80211_IF_TYPE_AP &&
type2 == IEEE80211_IF_TYPE_VLAN) ||
(type1 == IEEE80211_IF_TYPE_VLAN &&
(type2 == IEEE80211_IF_TYPE_AP ||
type2 == IEEE80211_IF_TYPE_VLAN)));
}
static int ieee80211_open(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata, *nsdata;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_init_conf conf;
int res;
bool need_hw_reconfig = 0;
struct sta_info *sta;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(nsdata, &local->interfaces, list) {
struct net_device *ndev = nsdata->dev;
if (ndev != dev && ndev != local->mdev && netif_running(ndev)) {
/*
* Allow only a single IBSS interface to be up at any
* time. This is restricted because beacon distribution
* cannot work properly if both are in the same IBSS.
*
* To remove this restriction we'd have to disallow them
* from setting the same SSID on different IBSS interfaces
* belonging to the same hardware. Then, however, we're
* faced with having to adopt two different TSF timers...
*/
if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
nsdata->vif.type == IEEE80211_IF_TYPE_IBSS)
return -EBUSY;
/*
* Disallow multiple IBSS/STA mode interfaces.
*
* This is a technical restriction, it is possible although
* most likely not IEEE 802.11 compliant to have multiple
* STAs with just a single hardware (the TSF timer will not
* be adjusted properly.)
*
* However, because mac80211 uses the master device's BSS
* information for each STA/IBSS interface, doing this will
* currently corrupt that BSS information completely, unless,
* a not very useful case, both STAs are associated to the
* same BSS.
*
* To remove this restriction, the BSS information needs to
* be embedded in the STA/IBSS mode sdata instead of using
* the master device's BSS structure.
*/
if ((sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) &&
(nsdata->vif.type == IEEE80211_IF_TYPE_STA ||
nsdata->vif.type == IEEE80211_IF_TYPE_IBSS))
return -EBUSY;
/*
* The remaining checks are only performed for interfaces
* with the same MAC address.
*/
if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
continue;
/*
* check whether it may have the same address
*/
if (!identical_mac_addr_allowed(sdata->vif.type,
nsdata->vif.type))
return -ENOTUNIQ;
/*
* can only add VLANs to enabled APs
*/
if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN &&
nsdata->vif.type == IEEE80211_IF_TYPE_AP)
sdata->u.vlan.ap = nsdata;
}
}
switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_WDS:
if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
return -ENOLINK;
break;
case IEEE80211_IF_TYPE_VLAN:
if (!sdata->u.vlan.ap)
return -ENOLINK;
break;
case IEEE80211_IF_TYPE_AP:
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_MNTR:
case IEEE80211_IF_TYPE_IBSS:
case IEEE80211_IF_TYPE_MESH_POINT:
/* no special treatment */
break;
case IEEE80211_IF_TYPE_INVALID:
/* cannot happen */
WARN_ON(1);
break;
}
if (local->open_count == 0) {
res = 0;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
if (local->ops->start)
res = local->ops->start(local_to_hw(local));
if (res)
return res;
need_hw_reconfig = 1;
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_VLAN:
list_add(&sdata->u.vlan.list, &sdata->u.vlan.ap->u.ap.vlans);
/* no need to tell driver */
break;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
case IEEE80211_IF_TYPE_MNTR:
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
local->cooked_mntrs++;
break;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
/* must be before the call to ieee80211_configure_filter */
local->monitors++;
if (local->monitors == 1)
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
local->fif_fcsfail++;
if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
local->fif_plcpfail++;
if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
local->fif_control++;
if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
local->fif_other_bss++;
netif_tx_lock_bh(local->mdev);
ieee80211_configure_filter(local);
netif_tx_unlock_bh(local->mdev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
break;
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
/* fall through */
default:
conf.vif = &sdata->vif;
conf.type = sdata->vif.type;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
conf.mac_addr = dev->dev_addr;
res = local->ops->add_interface(local_to_hw(local), &conf);
if (res)
goto err_stop;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
ieee80211_if_config(dev);
ieee80211_reset_erp_info(dev);
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 01:01:55 +04:00
ieee80211_enable_keys(sdata);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
if (sdata->vif.type == IEEE80211_IF_TYPE_STA &&
!(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
netif_carrier_off(dev);
else
netif_carrier_on(dev);
}
if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
/* Create STA entry for the WDS peer */
sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
GFP_KERNEL);
if (!sta) {
res = -ENOMEM;
goto err_del_interface;
}
/* no locking required since STA is not live yet */
sta->flags |= WLAN_STA_AUTHORIZED;
res = sta_info_insert(sta);
if (res) {
/* STA has been freed */
goto err_del_interface;
}
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
if (local->open_count == 0) {
res = dev_open(local->mdev);
WARN_ON(res);
if (res)
goto err_del_interface;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
tasklet_enable(&local->tx_pending_tasklet);
tasklet_enable(&local->tasklet);
}
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
* error and sync them down to the hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_inc(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_inc(&local->iff_promiscs);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
local->open_count++;
if (need_hw_reconfig)
ieee80211_hw_config(local);
/*
* ieee80211_sta_work is disabled while network interface
* is down. Therefore, some configuration changes may not
* yet be effective. Trigger execution of ieee80211_sta_work
* to fix this.
*/
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
queue_work(local->hw.workqueue, &ifsta->work);
}
netif_start_queue(dev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
return 0;
err_del_interface:
local->ops->remove_interface(local_to_hw(local), &conf);
err_stop:
if (!local->open_count && local->ops->stop)
local->ops->stop(local_to_hw(local));
return res;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
static int ieee80211_stop(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
struct ieee80211_if_init_conf conf;
struct sta_info *sta;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
/*
* Stop TX on this interface first.
*/
netif_stop_queue(dev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
/*
* Now delete all active aggregation sessions.
*/
rcu_read_lock();
list_for_each_entry_rcu(sta, &local->sta_list, list) {
if (sta->sdata == sdata)
ieee80211_sta_tear_down_BA_sessions(dev, sta->addr);
}
rcu_read_unlock();
/*
* Remove all stations associated with this interface.
*
* This must be done before calling ops->remove_interface()
* because otherwise we can later invoke ops->sta_notify()
* whenever the STAs are removed, and that invalidates driver
* assumptions about always getting a vif pointer that is valid
* (because if we remove a STA after ops->remove_interface()
* the driver will have removed the vif info already!)
*
* We could relax this and only unlink the stations from the
* hash table and list but keep them on a per-sdata list that
* will be inserted back again when the interface is brought
* up again, but I don't currently see a use case for that,
* except with WDS which gets a STA entry created when it is
* brought up.
*/
sta_info_flush(local, sdata);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
/*
* Don't count this interface for promisc/allmulti while it
* is down. dev_mc_unsync() will invoke set_multicast_list
* on the master interface which will sync these down to the
* hardware as filter flags.
*/
if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
atomic_dec(&local->iff_allmultis);
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_dec(&local->iff_promiscs);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
dev_mc_unsync(local->mdev, dev);
/* APs need special treatment */
if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
struct ieee80211_sub_if_data *vlan, *tmp;
struct beacon_data *old_beacon = sdata->u.ap.beacon;
/* remove beacon */
rcu_assign_pointer(sdata->u.ap.beacon, NULL);
synchronize_rcu();
kfree(old_beacon);
/* down all dependent devices, that is VLANs */
list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
u.vlan.list)
dev_close(vlan->dev);
WARN_ON(!list_empty(&sdata->u.ap.vlans));
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
local->open_count--;
switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_VLAN:
list_del(&sdata->u.vlan.list);
sdata->u.vlan.ap = NULL;
/* no need to tell driver */
break;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
case IEEE80211_IF_TYPE_MNTR:
if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
local->cooked_mntrs--;
break;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
local->monitors--;
if (local->monitors == 0)
local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
local->fif_fcsfail--;
if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
local->fif_plcpfail--;
if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
local->fif_control--;
if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
local->fif_other_bss--;
netif_tx_lock_bh(local->mdev);
ieee80211_configure_filter(local);
netif_tx_unlock_bh(local->mdev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
break;
case IEEE80211_IF_TYPE_MESH_POINT:
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.state = IEEE80211_DISABLED;
del_timer_sync(&sdata->u.sta.timer);
/*
* When we get here, the interface is marked down.
* Call synchronize_rcu() to wait for the RX path
* should it be using the interface and enqueuing
* frames at this very time on another CPU.
*/
synchronize_rcu();
skb_queue_purge(&sdata->u.sta.skb_queue);
mac80211: hardware scan rework The scan code in mac80211 makes the software scan assumption in various places. For example, we stop the Tx queue during a software scan so that all the Tx packets will be queued by the stack. We also drop frames not related to scan in the software scan process. But these are not true for hardware scan. Some wireless hardwares (for example iwl3945/4965) has the ability to perform the whole scan process by hardware and/or firmware. The hardware scan is relative powerful in that it tries to maintain normal network traffic while doing a scan in the background. Some drivers (i.e iwlwifi) do provide a way to tune the hardware scan parameters (for example if the STA is associated, what's the max time could the STA leave from the associated channel, how long the scans get suspended after returning to the service channel, etc). But basically this is transparent to the stack. mac80211 should not stop Tx queues or drop Rx packets during a hardware scan. This patch resolves the above problem by spliting the current scan indicator local->sta_scanning into local->sta_sw_scanning and local->sta_hw_scanning. It then changes the scan related code to be aware of hardware scan or software scan in various places. With this patch, iwlwifi performs much better in the scan-while-associated condition and disable_hw_scan=1 should never be required. Cc: Mohamed Abbas <mohamed.abbas@intel.com> Cc: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-22 05:53:21 +03:00
if (local->scan_dev == sdata->dev) {
if (!local->ops->hw_scan) {
local->sta_sw_scanning = 0;
cancel_delayed_work(&local->scan_work);
} else
local->sta_hw_scanning = 0;
}
mac80211: hardware scan rework The scan code in mac80211 makes the software scan assumption in various places. For example, we stop the Tx queue during a software scan so that all the Tx packets will be queued by the stack. We also drop frames not related to scan in the software scan process. But these are not true for hardware scan. Some wireless hardwares (for example iwl3945/4965) has the ability to perform the whole scan process by hardware and/or firmware. The hardware scan is relative powerful in that it tries to maintain normal network traffic while doing a scan in the background. Some drivers (i.e iwlwifi) do provide a way to tune the hardware scan parameters (for example if the STA is associated, what's the max time could the STA leave from the associated channel, how long the scans get suspended after returning to the service channel, etc). But basically this is transparent to the stack. mac80211 should not stop Tx queues or drop Rx packets during a hardware scan. This patch resolves the above problem by spliting the current scan indicator local->sta_scanning into local->sta_sw_scanning and local->sta_hw_scanning. It then changes the scan related code to be aware of hardware scan or software scan in various places. With this patch, iwlwifi performs much better in the scan-while-associated condition and disable_hw_scan=1 should never be required. Cc: Mohamed Abbas <mohamed.abbas@intel.com> Cc: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-22 05:53:21 +03:00
flush_workqueue(local->hw.workqueue);
sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
kfree(sdata->u.sta.extra_ie);
sdata->u.sta.extra_ie = NULL;
sdata->u.sta.extra_ie_len = 0;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
/* fall through */
default:
conf.vif = &sdata->vif;
conf.type = sdata->vif.type;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
conf.mac_addr = dev->dev_addr;
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 01:01:55 +04:00
/* disable all keys for as long as this netdev is down */
ieee80211_disable_keys(sdata);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
local->ops->remove_interface(local_to_hw(local), &conf);
}
if (local->open_count == 0) {
if (netif_running(local->mdev))
dev_close(local->mdev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
if (local->ops->stop)
local->ops->stop(local_to_hw(local));
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
ieee80211_led_radio(local, 0);
tasklet_disable(&local->tx_pending_tasklet);
tasklet_disable(&local->tasklet);
}
return 0;
}
int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
{
struct ieee80211_local *local = hw_to_local(hw);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
u16 start_seq_num = 0;
u8 *state;
int ret;
DECLARE_MAC_BUF(mac);
if (tid >= STA_TID_NUM)
return -EINVAL;
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Open BA session requested for %s tid %u\n",
print_mac(mac, ra), tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
rcu_read_lock();
sta = sta_info_get(local, ra);
if (!sta) {
printk(KERN_DEBUG "Could not find the station\n");
rcu_read_unlock();
return -ENOENT;
}
spin_lock_bh(&sta->lock);
/* we have tried too many times, receiver does not want A-MPDU */
if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
ret = -EBUSY;
goto start_ba_exit;
}
state = &sta->ampdu_mlme.tid_state_tx[tid];
/* check if the TID is not in aggregation flow already */
if (*state != HT_AGG_STATE_IDLE) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "BA request denied - session is not "
"idle on tid %u\n", tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
ret = -EAGAIN;
goto start_ba_exit;
}
/* prepare A-MPDU MLME for Tx aggregation */
sta->ampdu_mlme.tid_tx[tid] =
kmalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
if (!sta->ampdu_mlme.tid_tx[tid]) {
if (net_ratelimit())
printk(KERN_ERR "allocate tx mlme to tid %d failed\n",
tid);
ret = -ENOMEM;
goto start_ba_exit;
}
/* Tx timer */
sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.function =
sta_addba_resp_timer_expired;
sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.data =
(unsigned long)&sta->timer_to_tid[tid];
init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
/* ensure that TX flow won't interrupt us
* until the end of the call to requeue function */
spin_lock_bh(&local->mdev->queue_lock);
/* create a new queue for this aggregation */
ret = ieee80211_ht_agg_queue_add(local, sta, tid);
/* case no queue is available to aggregation
* don't switch to aggregation */
if (ret) {
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "BA request denied - queue unavailable for"
" tid %d\n", tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
goto start_ba_err;
}
sdata = sta->sdata;
/* Ok, the Addba frame hasn't been sent yet, but if the driver calls the
* call back right away, it must see that the flow has begun */
*state |= HT_ADDBA_REQUESTED_MSK;
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
ra, tid, &start_seq_num);
if (ret) {
/* No need to requeue the packets in the agg queue, since we
* held the tx lock: no packet could be enqueued to the newly
* allocated queue */
ieee80211_ht_agg_queue_remove(local, sta, tid, 0);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "BA request denied - HW unavailable for"
" tid %d\n", tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
*state = HT_AGG_STATE_IDLE;
goto start_ba_err;
}
/* Will put all the packets in the new SW queue */
ieee80211_requeue(local, ieee802_1d_to_ac[tid]);
spin_unlock_bh(&local->mdev->queue_lock);
/* send an addBA request */
sta->ampdu_mlme.dialog_token_allocator++;
sta->ampdu_mlme.tid_tx[tid]->dialog_token =
sta->ampdu_mlme.dialog_token_allocator;
sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num;
ieee80211_send_addba_request(sta->sdata->dev, ra, tid,
sta->ampdu_mlme.tid_tx[tid]->dialog_token,
sta->ampdu_mlme.tid_tx[tid]->ssn,
0x40, 5000);
/* activate the timer for the recipient's addBA response */
sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires =
jiffies + ADDBA_RESP_INTERVAL;
add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
goto start_ba_exit;
start_ba_err:
kfree(sta->ampdu_mlme.tid_tx[tid]);
sta->ampdu_mlme.tid_tx[tid] = NULL;
spin_unlock_bh(&local->mdev->queue_lock);
ret = -EBUSY;
start_ba_exit:
spin_unlock_bh(&sta->lock);
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw,
u8 *ra, u16 tid,
enum ieee80211_back_parties initiator)
{
struct ieee80211_local *local = hw_to_local(hw);
struct sta_info *sta;
u8 *state;
int ret = 0;
DECLARE_MAC_BUF(mac);
if (tid >= STA_TID_NUM)
return -EINVAL;
rcu_read_lock();
sta = sta_info_get(local, ra);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
/* check if the TID is in aggregation */
state = &sta->ampdu_mlme.tid_state_tx[tid];
spin_lock_bh(&sta->lock);
if (*state != HT_AGG_STATE_OPERATIONAL) {
ret = -ENOENT;
goto stop_BA_exit;
}
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Tx BA session stop requested for %s tid %u\n",
print_mac(mac, ra), tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
ieee80211_stop_queue(hw, sta->tid_to_tx_q[tid]);
*state = HT_AGG_STATE_REQ_STOP_BA_MSK |
(initiator << HT_AGG_STATE_INITIATOR_SHIFT);
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_STOP,
ra, tid, NULL);
/* case HW denied going back to legacy */
if (ret) {
WARN_ON(ret != -EBUSY);
*state = HT_AGG_STATE_OPERATIONAL;
ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
goto stop_BA_exit;
}
stop_BA_exit:
spin_unlock_bh(&sta->lock);
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid)
{
struct ieee80211_local *local = hw_to_local(hw);
struct sta_info *sta;
u8 *state;
DECLARE_MAC_BUF(mac);
if (tid >= STA_TID_NUM) {
printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n",
tid, STA_TID_NUM);
return;
}
rcu_read_lock();
sta = sta_info_get(local, ra);
if (!sta) {
rcu_read_unlock();
printk(KERN_DEBUG "Could not find station: %s\n",
print_mac(mac, ra));
return;
}
state = &sta->ampdu_mlme.tid_state_tx[tid];
spin_lock_bh(&sta->lock);
if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
printk(KERN_DEBUG "addBA was not requested yet, state is %d\n",
*state);
spin_unlock_bh(&sta->lock);
rcu_read_unlock();
return;
}
WARN_ON_ONCE(*state & HT_ADDBA_DRV_READY_MSK);
*state |= HT_ADDBA_DRV_READY_MSK;
if (*state == HT_AGG_STATE_OPERATIONAL) {
printk(KERN_DEBUG "Aggregation is on for tid %d \n", tid);
ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
}
spin_unlock_bh(&sta->lock);
rcu_read_unlock();
}
EXPORT_SYMBOL(ieee80211_start_tx_ba_cb);
void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid)
{
struct ieee80211_local *local = hw_to_local(hw);
struct sta_info *sta;
u8 *state;
int agg_queue;
DECLARE_MAC_BUF(mac);
if (tid >= STA_TID_NUM) {
printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n",
tid, STA_TID_NUM);
return;
}
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Stopping Tx BA session for %s tid %d\n",
print_mac(mac, ra), tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
rcu_read_lock();
sta = sta_info_get(local, ra);
if (!sta) {
printk(KERN_DEBUG "Could not find station: %s\n",
print_mac(mac, ra));
rcu_read_unlock();
return;
}
state = &sta->ampdu_mlme.tid_state_tx[tid];
spin_lock_bh(&sta->lock);
if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) {
printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n");
spin_unlock_bh(&sta->lock);
rcu_read_unlock();
return;
}
if (*state & HT_AGG_STATE_INITIATOR_MSK)
ieee80211_send_delba(sta->sdata->dev, ra, tid,
WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
agg_queue = sta->tid_to_tx_q[tid];
/* avoid ordering issues: we are the only one that can modify
* the content of the qdiscs */
spin_lock_bh(&local->mdev->queue_lock);
/* remove the queue for this aggregation */
ieee80211_ht_agg_queue_remove(local, sta, tid, 1);
spin_unlock_bh(&local->mdev->queue_lock);
/* we just requeued the all the frames that were in the removed
* queue, and since we might miss a softirq we do netif_schedule.
* ieee80211_wake_queue is not used here as this queue is not
* necessarily stopped */
netif_schedule(local->mdev);
*state = HT_AGG_STATE_IDLE;
sta->ampdu_mlme.addba_req_num[tid] = 0;
kfree(sta->ampdu_mlme.tid_tx[tid]);
sta->ampdu_mlme.tid_tx[tid] = NULL;
spin_unlock_bh(&sta->lock);
rcu_read_unlock();
}
EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb);
void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
const u8 *ra, u16 tid)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_ra_tid *ra_tid;
struct sk_buff *skb = dev_alloc_skb(0);
if (unlikely(!skb)) {
if (net_ratelimit())
printk(KERN_WARNING "%s: Not enough memory, "
"dropping start BA session", skb->dev->name);
return;
}
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
memcpy(&ra_tid->ra, ra, ETH_ALEN);
ra_tid->tid = tid;
skb->pkt_type = IEEE80211_ADDBA_MSG;
skb_queue_tail(&local->skb_queue, skb);
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
const u8 *ra, u16 tid)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_ra_tid *ra_tid;
struct sk_buff *skb = dev_alloc_skb(0);
if (unlikely(!skb)) {
if (net_ratelimit())
printk(KERN_WARNING "%s: Not enough memory, "
"dropping stop BA session", skb->dev->name);
return;
}
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
memcpy(&ra_tid->ra, ra, ETH_ALEN);
ra_tid->tid = tid;
skb->pkt_type = IEEE80211_DELBA_MSG;
skb_queue_tail(&local->skb_queue, skb);
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
static void ieee80211_set_multicast_list(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
int allmulti, promisc, sdata_allmulti, sdata_promisc;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
allmulti = !!(dev->flags & IFF_ALLMULTI);
promisc = !!(dev->flags & IFF_PROMISC);
sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
if (allmulti != sdata_allmulti) {
if (dev->flags & IFF_ALLMULTI)
atomic_inc(&local->iff_allmultis);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
else
atomic_dec(&local->iff_allmultis);
sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
if (promisc != sdata_promisc) {
if (dev->flags & IFF_PROMISC)
atomic_inc(&local->iff_promiscs);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
else
atomic_dec(&local->iff_promiscs);
sdata->flags ^= IEEE80211_SDATA_PROMISC;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
dev_mc_sync(local->mdev, dev);
}
static const struct header_ops ieee80211_header_ops = {
.create = eth_header,
.parse = header_parse_80211,
.rebuild = eth_rebuild_header,
.cache = eth_header_cache,
.cache_update = eth_header_cache_update,
};
/* Must not be called for mdev */
void ieee80211_if_setup(struct net_device *dev)
{
ether_setup(dev);
dev->hard_start_xmit = ieee80211_subif_start_xmit;
dev->wireless_handlers = &ieee80211_iw_handler_def;
dev->set_multicast_list = ieee80211_set_multicast_list;
dev->change_mtu = ieee80211_change_mtu;
dev->open = ieee80211_open;
dev->stop = ieee80211_stop;
dev->destructor = ieee80211_if_free;
}
/* everything else */
static int __ieee80211_if_config(struct net_device *dev,
struct sk_buff *beacon,
struct ieee80211_tx_control *control)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_conf conf;
if (!local->ops->config_interface || !netif_running(dev))
return 0;
memset(&conf, 0, sizeof(conf));
conf.type = sdata->vif.type;
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
conf.bssid = sdata->u.sta.bssid;
conf.ssid = sdata->u.sta.ssid;
conf.ssid_len = sdata->u.sta.ssid_len;
} else if (ieee80211_vif_is_mesh(&sdata->vif)) {
conf.beacon = beacon;
conf.beacon_control = control;
ieee80211_start_mesh(dev);
} else if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
conf.ssid = sdata->u.ap.ssid;
conf.ssid_len = sdata->u.ap.ssid_len;
conf.beacon = beacon;
conf.beacon_control = control;
}
return local->ops->config_interface(local_to_hw(local),
&sdata->vif, &conf);
}
int ieee80211_if_config(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT &&
(local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE))
return ieee80211_if_config_beacon(dev);
return __ieee80211_if_config(dev, NULL, NULL);
}
int ieee80211_if_config_beacon(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_control control;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sk_buff *skb;
if (!(local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE))
return 0;
skb = ieee80211_beacon_get(local_to_hw(local), &sdata->vif,
&control);
if (!skb)
return -ENOMEM;
return __ieee80211_if_config(dev, skb, &control);
}
int ieee80211_hw_config(struct ieee80211_local *local)
{
struct ieee80211_channel *chan;
int ret = 0;
if (local->sta_sw_scanning)
chan = local->scan_channel;
else
chan = local->oper_channel;
local->hw.conf.channel = chan;
if (!local->hw.conf.power_level)
local->hw.conf.power_level = chan->max_power;
else
local->hw.conf.power_level = min(chan->max_power,
local->hw.conf.power_level);
local->hw.conf.max_antenna_gain = chan->max_antenna_gain;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n",
wiphy_name(local->hw.wiphy), chan->center_freq);
#endif
if (local->open_count)
ret = local->ops->config(local_to_hw(local), &local->hw.conf);
return ret;
}
/**
* ieee80211_handle_ht should be used only after legacy configuration
* has been determined namely band, as ht configuration depends upon
* the hardware's HT abilities for a _specific_ band.
*/
u32 ieee80211_handle_ht(struct ieee80211_local *local, int enable_ht,
struct ieee80211_ht_info *req_ht_cap,
struct ieee80211_ht_bss_info *req_bss_cap)
{
struct ieee80211_conf *conf = &local->hw.conf;
struct ieee80211_supported_band *sband;
struct ieee80211_ht_info ht_conf;
struct ieee80211_ht_bss_info ht_bss_conf;
u32 changed = 0;
int i;
u8 max_tx_streams = IEEE80211_HT_CAP_MAX_STREAMS;
u8 tx_mcs_set_cap;
sband = local->hw.wiphy->bands[conf->channel->band];
memset(&ht_conf, 0, sizeof(struct ieee80211_ht_info));
memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info));
/* HT is not supported */
if (!sband->ht_info.ht_supported) {
conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
goto out;
}
/* disable HT */
if (!enable_ht) {
if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)
changed |= BSS_CHANGED_HT;
conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
conf->ht_conf.ht_supported = 0;
goto out;
}
if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE))
changed |= BSS_CHANGED_HT;
conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
ht_conf.ht_supported = 1;
ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap;
ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS);
ht_conf.cap |= sband->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS;
ht_bss_conf.primary_channel = req_bss_cap->primary_channel;
ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
ht_conf.ampdu_factor = req_ht_cap->ampdu_factor;
ht_conf.ampdu_density = req_ht_cap->ampdu_density;
/* Bits 96-100 */
tx_mcs_set_cap = sband->ht_info.supp_mcs_set[12];
/* configure suppoerted Tx MCS according to requested MCS
* (based in most cases on Rx capabilities of peer) and self
* Tx MCS capabilities (as defined by low level driver HW
* Tx capabilities) */
if (!(tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_DEFINED))
goto check_changed;
/* Counting from 0 therfore + 1 */
if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_RX_DIFF)
max_tx_streams = ((tx_mcs_set_cap &
IEEE80211_HT_CAP_MCS_TX_STREAMS) >> 2) + 1;
for (i = 0; i < max_tx_streams; i++)
ht_conf.supp_mcs_set[i] =
sband->ht_info.supp_mcs_set[i] &
req_ht_cap->supp_mcs_set[i];
if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_UEQM)
for (i = IEEE80211_SUPP_MCS_SET_UEQM;
i < IEEE80211_SUPP_MCS_SET_LEN; i++)
ht_conf.supp_mcs_set[i] =
sband->ht_info.supp_mcs_set[i] &
req_ht_cap->supp_mcs_set[i];
check_changed:
/* if bss configuration changed store the new one */
if (memcmp(&conf->ht_conf, &ht_conf, sizeof(ht_conf)) ||
memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) {
changed |= BSS_CHANGED_HT;
memcpy(&conf->ht_conf, &ht_conf, sizeof(ht_conf));
memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf));
}
out:
return changed;
}
void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
u32 changed)
{
struct ieee80211_local *local = sdata->local;
if (!changed)
return;
if (local->ops->bss_info_changed)
local->ops->bss_info_changed(local_to_hw(local),
&sdata->vif,
&sdata->bss_conf,
changed);
}
void ieee80211_reset_erp_info(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
sdata->bss_conf.use_cts_prot = 0;
sdata->bss_conf.use_short_preamble = 0;
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_ERP_CTS_PROT |
BSS_CHANGED_ERP_PREAMBLE);
}
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_status *saved;
int tmp;
skb->dev = local->mdev;
saved = kmalloc(sizeof(struct ieee80211_tx_status), GFP_ATOMIC);
if (unlikely(!saved)) {
if (net_ratelimit())
printk(KERN_WARNING "%s: Not enough memory, "
"dropping tx status", skb->dev->name);
/* should be dev_kfree_skb_irq, but due to this function being
* named _irqsafe instead of just _irq we can't be sure that
* people won't call it from non-irq contexts */
dev_kfree_skb_any(skb);
return;
}
memcpy(saved, status, sizeof(struct ieee80211_tx_status));
/* copy pointer to saved status into skb->cb for use by tasklet */
memcpy(skb->cb, &saved, sizeof(saved));
skb->pkt_type = IEEE80211_TX_STATUS_MSG;
skb_queue_tail(status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS ?
&local->skb_queue : &local->skb_queue_unreliable, skb);
tmp = skb_queue_len(&local->skb_queue) +
skb_queue_len(&local->skb_queue_unreliable);
while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
memcpy(&saved, skb->cb, sizeof(saved));
kfree(saved);
dev_kfree_skb_irq(skb);
tmp--;
I802_DEBUG_INC(local->tx_status_drop);
}
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
static void ieee80211_tasklet_handler(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *) data;
struct sk_buff *skb;
struct ieee80211_rx_status rx_status;
struct ieee80211_tx_status *tx_status;
struct ieee80211_ra_tid *ra_tid;
while ((skb = skb_dequeue(&local->skb_queue)) ||
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
switch (skb->pkt_type) {
case IEEE80211_RX_MSG:
/* status is in skb->cb */
memcpy(&rx_status, skb->cb, sizeof(rx_status));
/* Clear skb->pkt_type in order to not confuse kernel
* netstack. */
skb->pkt_type = 0;
__ieee80211_rx(local_to_hw(local), skb, &rx_status);
break;
case IEEE80211_TX_STATUS_MSG:
/* get pointer to saved status out of skb->cb */
memcpy(&tx_status, skb->cb, sizeof(tx_status));
skb->pkt_type = 0;
ieee80211_tx_status(local_to_hw(local),
skb, tx_status);
kfree(tx_status);
break;
case IEEE80211_DELBA_MSG:
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
ieee80211_stop_tx_ba_cb(local_to_hw(local),
ra_tid->ra, ra_tid->tid);
dev_kfree_skb(skb);
break;
case IEEE80211_ADDBA_MSG:
ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
ieee80211_start_tx_ba_cb(local_to_hw(local),
ra_tid->ra, ra_tid->tid);
dev_kfree_skb(skb);
break ;
default: /* should never get here! */
printk(KERN_ERR "%s: Unknown message type (%d)\n",
wiphy_name(local->hw.wiphy), skb->pkt_type);
dev_kfree_skb(skb);
break;
}
}
}
/* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
* make a prepared TX frame (one that has been given to hw) to look like brand
* new IEEE 802.11 frame that is ready to go through TX processing again.
* Also, tx_packet_data in cb is restored from tx_control. */
static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
struct ieee80211_key *key,
struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
int hdrlen, iv_len, mic_len;
struct ieee80211_tx_packet_data *pkt_data;
pkt_data = (struct ieee80211_tx_packet_data *)skb->cb;
pkt_data->ifindex = vif_to_sdata(control->vif)->dev->ifindex;
pkt_data->flags = 0;
if (control->flags & IEEE80211_TXCTL_REQ_TX_STATUS)
pkt_data->flags |= IEEE80211_TXPD_REQ_TX_STATUS;
if (control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)
pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT;
if (control->flags & IEEE80211_TXCTL_REQUEUE)
pkt_data->flags |= IEEE80211_TXPD_REQUEUE;
if (control->flags & IEEE80211_TXCTL_EAPOL_FRAME)
pkt_data->flags |= IEEE80211_TXPD_EAPOL_FRAME;
pkt_data->queue = control->queue;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
if (!key)
goto no_key;
switch (key->conf.alg) {
case ALG_WEP:
iv_len = WEP_IV_LEN;
mic_len = WEP_ICV_LEN;
break;
case ALG_TKIP:
iv_len = TKIP_IV_LEN;
mic_len = TKIP_ICV_LEN;
break;
case ALG_CCMP:
iv_len = CCMP_HDR_LEN;
mic_len = CCMP_MIC_LEN;
break;
default:
goto no_key;
}
if (skb->len >= mic_len &&
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 01:01:55 +04:00
!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
skb_trim(skb, skb->len - mic_len);
if (skb->len >= iv_len && skb->len > hdrlen) {
memmove(skb->data + iv_len, skb->data, hdrlen);
skb_pull(skb, iv_len);
}
no_key:
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
u16 fc = le16_to_cpu(hdr->frame_control);
if ((fc & 0x8C) == 0x88) /* QoS Control Field */ {
fc &= ~IEEE80211_STYPE_QOS_DATA;
hdr->frame_control = cpu_to_le16(fc);
memmove(skb->data + 2, skb->data, hdrlen - 2);
skb_pull(skb, 2);
}
}
}
static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
struct sta_info *sta,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
sta->tx_filtered_count++;
/*
* Clear the TX filter mask for this STA when sending the next
* packet. If the STA went to power save mode, this will happen
* happen when it wakes up for the next time.
*/
set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
/*
* This code races in the following way:
*
* (1) STA sends frame indicating it will go to sleep and does so
* (2) hardware/firmware adds STA to filter list, passes frame up
* (3) hardware/firmware processes TX fifo and suppresses a frame
* (4) we get TX status before having processed the frame and
* knowing that the STA has gone to sleep.
*
* This is actually quite unlikely even when both those events are
* processed from interrupts coming in quickly after one another or
* even at the same time because we queue both TX status events and
* RX frames to be processed by a tasklet and process them in the
* same order that they were received or TX status last. Hence, there
* is no race as long as the frame RX is processed before the next TX
* status, which drivers can ensure, see below.
*
* Note that this can only happen if the hardware or firmware can
* actually add STAs to the filter list, if this is done by the
* driver in response to set_tim() (which will only reduce the race
* this whole filtering tries to solve, not completely solve it)
* this situation cannot happen.
*
* To completely solve this race drivers need to make sure that they
* (a) don't mix the irq-safe/not irq-safe TX status/RX processing
* functions and
* (b) always process RX events before TX status events if ordering
* can be unknown, for example with different interrupt status
* bits.
*/
if (test_sta_flags(sta, WLAN_STA_PS) &&
skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
ieee80211_remove_tx_extra(local, sta->key, skb,
&status->control);
skb_queue_tail(&sta->tx_filtered, skb);
return;
}
if (!test_sta_flags(sta, WLAN_STA_PS) &&
!(status->control.flags & IEEE80211_TXCTL_REQUEUE)) {
/* Software retry the packet once */
status->control.flags |= IEEE80211_TXCTL_REQUEUE;
ieee80211_remove_tx_extra(local, sta->key, skb,
&status->control);
dev_queue_xmit(skb);
return;
}
if (net_ratelimit())
printk(KERN_DEBUG "%s: dropped TX filtered frame, "
"queue_len=%d PS=%d @%lu\n",
wiphy_name(local->hw.wiphy),
skb_queue_len(&sta->tx_filtered),
!!test_sta_flags(sta, WLAN_STA_PS), jiffies);
dev_kfree_skb(skb);
}
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct sk_buff *skb2;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
u16 frag, type;
struct ieee80211_tx_status_rtap_hdr *rthdr;
struct ieee80211_sub_if_data *sdata;
struct net_device *prev_dev = NULL;
if (!status) {
printk(KERN_ERR
"%s: ieee80211_tx_status called with NULL status\n",
wiphy_name(local->hw.wiphy));
dev_kfree_skb(skb);
return;
}
rcu_read_lock();
if (status->excessive_retries) {
struct sta_info *sta;
sta = sta_info_get(local, hdr->addr1);
if (sta) {
if (test_sta_flags(sta, WLAN_STA_PS)) {
/*
* The STA is in power save mode, so assume
* that this TX packet failed because of that.
*/
status->excessive_retries = 0;
status->flags |= IEEE80211_TX_STATUS_TX_FILTERED;
ieee80211_handle_filtered_frame(local, sta,
skb, status);
rcu_read_unlock();
return;
}
}
}
if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) {
struct sta_info *sta;
sta = sta_info_get(local, hdr->addr1);
if (sta) {
ieee80211_handle_filtered_frame(local, sta, skb,
status);
rcu_read_unlock();
return;
}
} else
rate_control_tx_status(local->mdev, skb, status);
rcu_read_unlock();
ieee80211_led_tx(local, 0);
/* SNMP counters
* Fragments are passed to low-level drivers as separate skbs, so these
* are actually fragments, not frames. Update frame counters only for
* the first fragment of the frame. */
frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
if (status->flags & IEEE80211_TX_STATUS_ACK) {
if (frag == 0) {
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(hdr->addr1))
local->dot11MulticastTransmittedFrameCount++;
if (status->retry_count > 0)
local->dot11RetryCount++;
if (status->retry_count > 1)
local->dot11MultipleRetryCount++;
}
/* This counter shall be incremented for an acknowledged MPDU
* with an individual address in the address 1 field or an MPDU
* with a multicast address in the address 1 field of type Data
* or Management. */
if (!is_multicast_ether_addr(hdr->addr1) ||
type == IEEE80211_FTYPE_DATA ||
type == IEEE80211_FTYPE_MGMT)
local->dot11TransmittedFragmentCount++;
} else {
if (frag == 0)
local->dot11FailedCount++;
}
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
/*
* This is a bit racy but we can avoid a lot of work
* with this test...
*/
if (!local->monitors && !local->cooked_mntrs) {
dev_kfree_skb(skb);
return;
}
/* send frame to monitor interfaces now */
if (skb_headroom(skb) < sizeof(*rthdr)) {
printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
dev_kfree_skb(skb);
return;
}
rthdr = (struct ieee80211_tx_status_rtap_hdr *)
skb_push(skb, sizeof(*rthdr));
memset(rthdr, 0, sizeof(*rthdr));
rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
rthdr->hdr.it_present =
cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
(1 << IEEE80211_RADIOTAP_DATA_RETRIES));
if (!(status->flags & IEEE80211_TX_STATUS_ACK) &&
!is_multicast_ether_addr(hdr->addr1))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
if ((status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) &&
(status->control.flags & IEEE80211_TXCTL_USE_CTS_PROTECT))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
else if (status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS)
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
rthdr->data_retries = status->retry_count;
/* XXX: is this sufficient for BPF? */
skb_set_mac_header(skb, 0);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_802_2);
memset(skb->cb, 0, sizeof(skb->cb));
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR) {
if (!netif_running(sdata->dev))
continue;
if (prev_dev) {
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2) {
skb2->dev = prev_dev;
netif_rx(skb2);
}
}
prev_dev = sdata->dev;
}
}
if (prev_dev) {
skb->dev = prev_dev;
netif_rx(skb);
skb = NULL;
}
rcu_read_unlock();
dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status);
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
struct ieee80211_local *local;
int priv_size;
struct wiphy *wiphy;
/* Ensure 32-byte alignment of our private data and hw private data.
* We use the wiphy priv data for both our ieee80211_local and for
* the driver's private data
*
* In memory it'll be like this:
*
* +-------------------------+
* | struct wiphy |
* +-------------------------+
* | struct ieee80211_local |
* +-------------------------+
* | driver's private data |
* +-------------------------+
*
*/
priv_size = ((sizeof(struct ieee80211_local) +
NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
priv_data_len;
wiphy = wiphy_new(&mac80211_config_ops, priv_size);
if (!wiphy)
return NULL;
wiphy->privid = mac80211_wiphy_privid;
local = wiphy_priv(wiphy);
local->hw.wiphy = wiphy;
local->hw.priv = (char *)local +
((sizeof(struct ieee80211_local) +
NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
BUG_ON(!ops->tx);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
BUG_ON(!ops->start);
BUG_ON(!ops->stop);
BUG_ON(!ops->config);
BUG_ON(!ops->add_interface);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 09:29:23 +04:00
BUG_ON(!ops->remove_interface);
BUG_ON(!ops->configure_filter);
local->ops = ops;
local->hw.queues = 1; /* default */
local->bridge_packets = 1;
local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
local->short_retry_limit = 7;
local->long_retry_limit = 4;
local->hw.conf.radio_enabled = 1;
INIT_LIST_HEAD(&local->interfaces);
spin_lock_init(&local->key_lock);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work);
sta_info_init(local);
tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
(unsigned long)local);
tasklet_disable(&local->tx_pending_tasklet);
tasklet_init(&local->tasklet,
ieee80211_tasklet_handler,
(unsigned long) local);
tasklet_disable(&local->tasklet);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
return local_to_hw(local);
}
EXPORT_SYMBOL(ieee80211_alloc_hw);
int ieee80211_register_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
const char *name;
int result;
enum ieee80211_band band;
struct net_device *mdev;
struct ieee80211_sub_if_data *sdata;
/*
* generic code guarantees at least one band,
* set this very early because much code assumes
* that hw.conf.channel is assigned
*/
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[band];
if (sband) {
/* init channel we're on */
local->hw.conf.channel =
local->oper_channel =
local->scan_channel = &sband->channels[0];
break;
}
}
result = wiphy_register(local->hw.wiphy);
if (result < 0)
return result;
/* for now, mdev needs sub_if_data :/ */
mdev = alloc_netdev(sizeof(struct ieee80211_sub_if_data),
"wmaster%d", ether_setup);
if (!mdev)
goto fail_mdev_alloc;
sdata = IEEE80211_DEV_TO_SUB_IF(mdev);
mdev->ieee80211_ptr = &sdata->wdev;
sdata->wdev.wiphy = local->hw.wiphy;
local->mdev = mdev;
ieee80211_rx_bss_list_init(mdev);
mdev->hard_start_xmit = ieee80211_master_start_xmit;
mdev->open = ieee80211_master_open;
mdev->stop = ieee80211_master_stop;
mdev->type = ARPHRD_IEEE80211;
mdev->header_ops = &ieee80211_header_ops;
mdev->set_multicast_list = ieee80211_master_set_multicast_list;
sdata->vif.type = IEEE80211_IF_TYPE_AP;
sdata->dev = mdev;
sdata->local = local;
sdata->u.ap.force_unicast_rateidx = -1;
sdata->u.ap.max_ratectrl_rateidx = -1;
ieee80211_if_sdata_init(sdata);
/* no RCU needed since we're still during init phase */
list_add_tail(&sdata->list, &local->interfaces);
name = wiphy_dev(local->hw.wiphy)->driver->name;
local->hw.workqueue = create_singlethread_workqueue(name);
if (!local->hw.workqueue) {
result = -ENOMEM;
goto fail_workqueue;
}
/*
* The hardware needs headroom for sending the frame,
* and we need some headroom for passing the frame to monitor
* interfaces, but never both at the same time.
*/
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
sizeof(struct ieee80211_tx_status_rtap_hdr));
debugfs_hw_add(local);
local->hw.conf.beacon_int = 1000;
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 21:15:40 +04:00
local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
IEEE80211_HW_SIGNAL_DB |
IEEE80211_HW_SIGNAL_DBM) ?
IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 21:15:40 +04:00
local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ?
IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID;
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 21:15:40 +04:00
if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
local->wstats_flags |= IW_QUAL_DBM;
result = sta_info_start(local);
if (result < 0)
goto fail_sta_info;
rtnl_lock();
result = dev_alloc_name(local->mdev, local->mdev->name);
if (result < 0)
goto fail_dev;
memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
result = register_netdevice(local->mdev);
if (result < 0)
goto fail_dev;
ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
ieee80211_if_set_type(local->mdev, IEEE80211_IF_TYPE_AP);
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize rate control "
"algorithm\n", wiphy_name(local->hw.wiphy));
goto fail_rate;
}
result = ieee80211_wep_init(local);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize wep\n",
wiphy_name(local->hw.wiphy));
goto fail_wep;
}
if (hw->queues > IEEE80211_MAX_QUEUES)
hw->queues = IEEE80211_MAX_QUEUES;
if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES)
hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES;
ieee80211_install_qdisc(local->mdev);
/* add one default STA interface */
result = ieee80211_if_add(local->mdev, "wlan%d", NULL,
IEEE80211_IF_TYPE_STA, NULL);
if (result)
printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
wiphy_name(local->hw.wiphy));
local->reg_state = IEEE80211_DEV_REGISTERED;
rtnl_unlock();
ieee80211_led_init(local);
return 0;
fail_wep:
rate_control_deinitialize(local);
fail_rate:
ieee80211_debugfs_remove_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
unregister_netdevice(local->mdev);
local->mdev = NULL;
fail_dev:
rtnl_unlock();
sta_info_stop(local);
fail_sta_info:
debugfs_hw_del(local);
destroy_workqueue(local->hw.workqueue);
fail_workqueue:
if (local->mdev != NULL) {
ieee80211_if_free(local->mdev);
local->mdev = NULL;
}
fail_mdev_alloc:
wiphy_unregister(local->hw.wiphy);
return result;
}
EXPORT_SYMBOL(ieee80211_register_hw);
void ieee80211_unregister_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata, *tmp;
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
rtnl_lock();
BUG_ON(local->reg_state != IEEE80211_DEV_REGISTERED);
local->reg_state = IEEE80211_DEV_UNREGISTERED;
/*
* At this point, interface list manipulations are fine
* because the driver cannot be handing us frames any
* more and the tasklet is killed.
*/
/*
* First, we remove all non-master interfaces. Do this because they
* may have bss pointer dependency on the master, and when we free
* the master these would be freed as well, breaking our list
* iteration completely.
*/
list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
if (sdata->dev == local->mdev)
continue;
list_del(&sdata->list);
__ieee80211_if_del(local, sdata);
}
/* then, finally, remove the master interface */
__ieee80211_if_del(local, IEEE80211_DEV_TO_SUB_IF(local->mdev));
rtnl_unlock();
ieee80211_rx_bss_list_deinit(local->mdev);
ieee80211_clear_tx_pending(local);
sta_info_stop(local);
rate_control_deinitialize(local);
debugfs_hw_del(local);
if (skb_queue_len(&local->skb_queue)
|| skb_queue_len(&local->skb_queue_unreliable))
printk(KERN_WARNING "%s: skb_queue not empty\n",
wiphy_name(local->hw.wiphy));
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
destroy_workqueue(local->hw.workqueue);
wiphy_unregister(local->hw.wiphy);
ieee80211_wep_free(local);
ieee80211_led_exit(local);
ieee80211_if_free(local->mdev);
local->mdev = NULL;
}
EXPORT_SYMBOL(ieee80211_unregister_hw);
void ieee80211_free_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
wiphy_free(local->hw.wiphy);
}
EXPORT_SYMBOL(ieee80211_free_hw);
static int __init ieee80211_init(void)
{
struct sk_buff *skb;
int ret;
BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
ret = rc80211_pid_init();
if (ret)
goto out;
ret = ieee80211_wme_register();
if (ret) {
printk(KERN_DEBUG "ieee80211_init: failed to "
"initialize WME (err=%d)\n", ret);
goto out_cleanup_pid;
}
ieee80211_debugfs_netdev_init();
return 0;
out_cleanup_pid:
rc80211_pid_exit();
out:
return ret;
}
static void __exit ieee80211_exit(void)
{
rc80211_pid_exit();
/*
* For key todo, it'll be empty by now but the work
* might still be scheduled.
*/
flush_scheduled_work();
if (mesh_allocated)
ieee80211s_stop();
ieee80211_wme_unregister();
ieee80211_debugfs_netdev_exit();
}
subsys_initcall(ieee80211_init);
module_exit(ieee80211_exit);
MODULE_DESCRIPTION("IEEE 802.11 subsystem");
MODULE_LICENSE("GPL");