WSL2-Linux-Kernel/drivers/clk/samsung/clk-exynos-audss.c

297 строки
7.7 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* Author: Padmavathi Venna <padma.v@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Common Clock Framework support for Audio Subsystem Clock Controller.
*/
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/syscore_ops.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
static DEFINE_SPINLOCK(lock);
static void __iomem *reg_base;
static struct clk_hw_onecell_data *clk_data;
/*
* On Exynos5420 this will be a clock which has to be enabled before any
* access to audss registers. Typically a child of EPLL.
*
* On other platforms this will be -ENODEV.
*/
static struct clk *epll;
#define ASS_CLK_SRC 0x0
#define ASS_CLK_DIV 0x4
#define ASS_CLK_GATE 0x8
#ifdef CONFIG_PM_SLEEP
static unsigned long reg_save[][2] = {
{ ASS_CLK_SRC, 0 },
{ ASS_CLK_DIV, 0 },
{ ASS_CLK_GATE, 0 },
};
static int exynos_audss_clk_suspend(struct device *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(reg_save); i++)
reg_save[i][1] = readl(reg_base + reg_save[i][0]);
return 0;
}
static int exynos_audss_clk_resume(struct device *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(reg_save); i++)
writel(reg_save[i][1], reg_base + reg_save[i][0]);
return 0;
}
#endif /* CONFIG_PM_SLEEP */
struct exynos_audss_clk_drvdata {
unsigned int has_adma_clk:1;
unsigned int has_mst_clk:1;
unsigned int enable_epll:1;
unsigned int num_clks;
};
static const struct exynos_audss_clk_drvdata exynos4210_drvdata = {
.num_clks = EXYNOS_AUDSS_MAX_CLKS - 1,
.enable_epll = 1,
};
static const struct exynos_audss_clk_drvdata exynos5410_drvdata = {
.num_clks = EXYNOS_AUDSS_MAX_CLKS - 1,
.has_mst_clk = 1,
};
static const struct exynos_audss_clk_drvdata exynos5420_drvdata = {
.num_clks = EXYNOS_AUDSS_MAX_CLKS,
.has_adma_clk = 1,
.enable_epll = 1,
};
static const struct of_device_id exynos_audss_clk_of_match[] = {
{
.compatible = "samsung,exynos4210-audss-clock",
.data = &exynos4210_drvdata,
}, {
.compatible = "samsung,exynos5250-audss-clock",
.data = &exynos4210_drvdata,
}, {
.compatible = "samsung,exynos5410-audss-clock",
.data = &exynos5410_drvdata,
}, {
.compatible = "samsung,exynos5420-audss-clock",
.data = &exynos5420_drvdata,
},
{ },
};
MODULE_DEVICE_TABLE(of, exynos_audss_clk_of_match);
static void exynos_audss_clk_teardown(void)
{
int i;
for (i = EXYNOS_MOUT_AUDSS; i < EXYNOS_DOUT_SRP; i++) {
if (!IS_ERR(clk_data->hws[i]))
clk_hw_unregister_mux(clk_data->hws[i]);
}
for (; i < EXYNOS_SRP_CLK; i++) {
if (!IS_ERR(clk_data->hws[i]))
clk_hw_unregister_divider(clk_data->hws[i]);
}
for (; i < clk_data->num; i++) {
if (!IS_ERR(clk_data->hws[i]))
clk_hw_unregister_gate(clk_data->hws[i]);
}
}
/* register exynos_audss clocks */
static int exynos_audss_clk_probe(struct platform_device *pdev)
{
const char *mout_audss_p[] = {"fin_pll", "fout_epll"};
const char *mout_i2s_p[] = {"mout_audss", "cdclk0", "sclk_audio0"};
const char *sclk_pcm_p = "sclk_pcm0";
struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in;
const struct exynos_audss_clk_drvdata *variant;
struct clk_hw **clk_table;
struct resource *res;
int i, ret = 0;
variant = of_device_get_match_data(&pdev->dev);
if (!variant)
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(reg_base)) {
dev_err(&pdev->dev, "failed to map audss registers\n");
return PTR_ERR(reg_base);
}
epll = ERR_PTR(-ENODEV);
clk_data = devm_kzalloc(&pdev->dev,
sizeof(*clk_data) +
sizeof(*clk_data->hws) * EXYNOS_AUDSS_MAX_CLKS,
GFP_KERNEL);
if (!clk_data)
return -ENOMEM;
clk_data->num = variant->num_clks;
clk_table = clk_data->hws;
pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
pll_in = devm_clk_get(&pdev->dev, "pll_in");
if (!IS_ERR(pll_ref))
mout_audss_p[0] = __clk_get_name(pll_ref);
if (!IS_ERR(pll_in)) {
mout_audss_p[1] = __clk_get_name(pll_in);
if (variant->enable_epll) {
epll = pll_in;
ret = clk_prepare_enable(epll);
if (ret) {
dev_err(&pdev->dev,
"failed to prepare the epll clock\n");
return ret;
}
}
}
clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss",
clk: add CLK_SET_RATE_NO_REPARENT flag Add a CLK_SET_RATE_NO_REPARENT clock flag, which will prevent muxes being reparented during clk_set_rate. To avoid breaking existing platforms, all callers of clk_register_mux() are adjusted to pass the new flag. Platform maintainers are encouraged to remove the flag if they wish to allow mux reparenting on set_rate. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Chao Xie <xiechao.mail@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrew Chew <achew@nvidia.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: spear-devel@list.st.com Cc: linux-tegra@vger.kernel.org Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> [tegra] Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [sunxi] Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> [Zynq] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 15:25:01 +04:00
mout_audss_p, ARRAY_SIZE(mout_audss_p),
CLK_SET_RATE_NO_REPARENT,
reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
cdclk = devm_clk_get(&pdev->dev, "cdclk");
sclk_audio = devm_clk_get(&pdev->dev, "sclk_audio");
if (!IS_ERR(cdclk))
mout_i2s_p[1] = __clk_get_name(cdclk);
if (!IS_ERR(sclk_audio))
mout_i2s_p[2] = __clk_get_name(sclk_audio);
clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(NULL, "mout_i2s",
clk: add CLK_SET_RATE_NO_REPARENT flag Add a CLK_SET_RATE_NO_REPARENT clock flag, which will prevent muxes being reparented during clk_set_rate. To avoid breaking existing platforms, all callers of clk_register_mux() are adjusted to pass the new flag. Platform maintainers are encouraged to remove the flag if they wish to allow mux reparenting on set_rate. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Chao Xie <xiechao.mail@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Emilio López" <emilio@elopez.com.ar> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrew Chew <achew@nvidia.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Tomasz Figa <t.figa@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: spear-devel@list.st.com Cc: linux-tegra@vger.kernel.org Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> [tegra] Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [sunxi] Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> [Zynq] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-29 15:25:01 +04:00
mout_i2s_p, ARRAY_SIZE(mout_i2s_p),
CLK_SET_RATE_NO_REPARENT,
reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp",
"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
0, &lock);
clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL,
"dout_aud_bus", "dout_srp", 0,
reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s",
"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
&lock);
clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(NULL, "srp_clk",
"dout_srp", CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 0, 0, &lock);
clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(NULL, "i2s_bus",
"dout_aud_bus", CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 2, 0, &lock);
clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(NULL, "sclk_i2s",
"dout_i2s", CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 3, 0, &lock);
clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(NULL, "pcm_bus",
"sclk_pcm", CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 4, 0, &lock);
sclk_pcm_in = devm_clk_get(&pdev->dev, "sclk_pcm_in");
if (!IS_ERR(sclk_pcm_in))
sclk_pcm_p = __clk_get_name(sclk_pcm_in);
clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(NULL, "sclk_pcm",
sclk_pcm_p, CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 5, 0, &lock);
if (variant->has_adma_clk) {
clk_table[EXYNOS_ADMA] = clk_hw_register_gate(NULL, "adma",
"dout_srp", CLK_SET_RATE_PARENT,
reg_base + ASS_CLK_GATE, 9, 0, &lock);
}
for (i = 0; i < clk_data->num; i++) {
if (IS_ERR(clk_table[i])) {
dev_err(&pdev->dev, "failed to register clock %d\n", i);
ret = PTR_ERR(clk_table[i]);
goto unregister;
}
}
ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
clk_data);
if (ret) {
dev_err(&pdev->dev, "failed to add clock provider\n");
goto unregister;
}
return 0;
unregister:
exynos_audss_clk_teardown();
if (!IS_ERR(epll))
clk_disable_unprepare(epll);
return ret;
}
static int exynos_audss_clk_remove(struct platform_device *pdev)
{
of_clk_del_provider(pdev->dev.of_node);
exynos_audss_clk_teardown();
if (!IS_ERR(epll))
clk_disable_unprepare(epll);
return 0;
}
static const struct dev_pm_ops exynos_audss_clk_pm_ops = {
SET_LATE_SYSTEM_SLEEP_PM_OPS(exynos_audss_clk_suspend,
exynos_audss_clk_resume)
};
static struct platform_driver exynos_audss_clk_driver = {
.driver = {
.name = "exynos-audss-clk",
.of_match_table = exynos_audss_clk_of_match,
.pm = &exynos_audss_clk_pm_ops,
},
.probe = exynos_audss_clk_probe,
.remove = exynos_audss_clk_remove,
};
module_platform_driver(exynos_audss_clk_driver);
MODULE_AUTHOR("Padmavathi Venna <padma.v@samsung.com>");
MODULE_DESCRIPTION("Exynos Audio Subsystem Clock Controller");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:exynos-audss-clk");