WSL2-Linux-Kernel/drivers/uwb/reset.c

394 строки
11 KiB
C
Исходник Обычный вид История

/*
* Ultra Wide Band
* UWB basic command support and radio reset
*
* Copyright (C) 2005-2006 Intel Corporation
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
*
* FIXME:
*
* - docs
*
* - Now we are serializing (using the uwb_dev->mutex) the command
* execution; it should be parallelized as much as possible some
* day.
*/
#include <linux/kernel.h>
#include <linux/err.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/export.h>
#include "uwb-internal.h"
/**
* Command result codes (WUSB1.0[T8-69])
*/
static
const char *__strerror[] = {
"success",
"failure",
"hardware failure",
"no more slots",
"beacon is too large",
"invalid parameter",
"unsupported power level",
"time out (wa) or invalid ie data (whci)",
"beacon size exceeded",
"cancelled",
"invalid state",
"invalid size",
"ack not received",
"no more asie notification",
};
/** Return a string matching the given error code */
const char *uwb_rc_strerror(unsigned code)
{
if (code == 255)
return "time out";
if (code >= ARRAY_SIZE(__strerror))
return "unknown error";
return __strerror[code];
}
int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
struct uwb_rccb *cmd, size_t cmd_size,
u8 expected_type, u16 expected_event,
uwb_rc_cmd_cb_f cb, void *arg)
{
struct device *dev = &rc->uwb_dev.dev;
struct uwb_rc_neh *neh;
int needtofree = 0;
int result;
uwb_dev_lock(&rc->uwb_dev); /* Protect against rc->priv being removed */
if (rc->priv == NULL) {
uwb_dev_unlock(&rc->uwb_dev);
return -ESHUTDOWN;
}
if (rc->filter_cmd) {
needtofree = rc->filter_cmd(rc, &cmd, &cmd_size);
if (needtofree < 0 && needtofree != -ENOANO) {
dev_err(dev, "%s: filter error: %d\n",
cmd_name, needtofree);
uwb_dev_unlock(&rc->uwb_dev);
return needtofree;
}
}
neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg);
if (IS_ERR(neh)) {
result = PTR_ERR(neh);
uwb_dev_unlock(&rc->uwb_dev);
goto out;
}
result = rc->cmd(rc, cmd, cmd_size);
uwb_dev_unlock(&rc->uwb_dev);
if (result < 0)
uwb_rc_neh_rm(rc, neh);
else
uwb_rc_neh_arm(rc, neh);
uwb_rc_neh_put(neh);
out:
if (needtofree == 1)
kfree(cmd);
return result < 0 ? result : 0;
}
EXPORT_SYMBOL_GPL(uwb_rc_cmd_async);
struct uwb_rc_cmd_done_params {
struct completion completion;
struct uwb_rceb *reply;
ssize_t reply_size;
};
static void uwb_rc_cmd_done(struct uwb_rc *rc, void *arg,
struct uwb_rceb *reply, ssize_t reply_size)
{
struct uwb_rc_cmd_done_params *p = (struct uwb_rc_cmd_done_params *)arg;
if (reply_size > 0) {
if (p->reply)
reply_size = min(p->reply_size, reply_size);
else
p->reply = kmalloc(reply_size, GFP_ATOMIC);
if (p->reply)
memcpy(p->reply, reply, reply_size);
else
reply_size = -ENOMEM;
}
p->reply_size = reply_size;
complete(&p->completion);
}
/**
* Generic function for issuing commands to the Radio Control Interface
*
* @rc: UWB Radio Control descriptor
* @cmd_name: Name of the command being issued (for error messages)
* @cmd: Pointer to rccb structure containing the command;
* normally you embed this structure as the first member of
* the full command structure.
* @cmd_size: Size of the whole command buffer pointed to by @cmd.
* @reply: Pointer to where to store the reply
* @reply_size: @reply's size
* @expected_type: Expected type in the return event
* @expected_event: Expected event code in the return event
* @preply: Here a pointer to where the event data is received will
* be stored. Once done with the data, free with kfree().
*
* This function is generic; it works for commands that return a fixed
* and known size or for commands that return a variable amount of data.
*
* If a buffer is provided, that is used, although it could be chopped
* to the maximum size of the buffer. If the buffer is NULL, then one
* be allocated in *preply with the whole contents of the reply.
*
* @rc needs to be referenced
*/
static
ssize_t __uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
struct uwb_rccb *cmd, size_t cmd_size,
struct uwb_rceb *reply, size_t reply_size,
u8 expected_type, u16 expected_event,
struct uwb_rceb **preply)
{
ssize_t result = 0;
struct device *dev = &rc->uwb_dev.dev;
struct uwb_rc_cmd_done_params params;
init_completion(&params.completion);
params.reply = reply;
params.reply_size = reply_size;
result = uwb_rc_cmd_async(rc, cmd_name, cmd, cmd_size,
expected_type, expected_event,
uwb_rc_cmd_done, &params);
if (result)
return result;
wait_for_completion(&params.completion);
if (preply)
*preply = params.reply;
if (params.reply_size < 0)
dev_err(dev, "%s: confirmation event 0x%02x/%04x/%02x "
"reception failed: %d\n", cmd_name,
expected_type, expected_event, cmd->bCommandContext,
(int)params.reply_size);
return params.reply_size;
}
/**
* Generic function for issuing commands to the Radio Control Interface
*
* @rc: UWB Radio Control descriptor
* @cmd_name: Name of the command being issued (for error messages)
* @cmd: Pointer to rccb structure containing the command;
* normally you embed this structure as the first member of
* the full command structure.
* @cmd_size: Size of the whole command buffer pointed to by @cmd.
* @reply: Pointer to the beginning of the confirmation event
* buffer. Normally bigger than an 'struct hwarc_rceb'.
* You need to fill out reply->bEventType and reply->wEvent (in
* cpu order) as the function will use them to verify the
* confirmation event.
* @reply_size: Size of the reply buffer
*
* The function checks that the length returned in the reply is at
* least as big as @reply_size; if not, it will be deemed an error and
* -EIO returned.
*
* @rc needs to be referenced
*/
ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
struct uwb_rccb *cmd, size_t cmd_size,
struct uwb_rceb *reply, size_t reply_size)
{
struct device *dev = &rc->uwb_dev.dev;
ssize_t result;
result = __uwb_rc_cmd(rc, cmd_name,
cmd, cmd_size, reply, reply_size,
reply->bEventType, reply->wEvent, NULL);
if (result > 0 && result < reply_size) {
dev_err(dev, "%s: not enough data returned for decoding reply "
"(%zu bytes received vs at least %zu needed)\n",
cmd_name, result, reply_size);
result = -EIO;
}
return result;
}
EXPORT_SYMBOL_GPL(uwb_rc_cmd);
/**
* Generic function for issuing commands to the Radio Control
* Interface that return an unknown amount of data
*
* @rc: UWB Radio Control descriptor
* @cmd_name: Name of the command being issued (for error messages)
* @cmd: Pointer to rccb structure containing the command;
* normally you embed this structure as the first member of
* the full command structure.
* @cmd_size: Size of the whole command buffer pointed to by @cmd.
* @expected_type: Expected type in the return event
* @expected_event: Expected event code in the return event
* @preply: Here a pointer to where the event data is received will
* be stored. Once done with the data, free with kfree().
*
* The function checks that the length returned in the reply is at
* least as big as a 'struct uwb_rceb *'; if not, it will be deemed an
* error and -EIO returned.
*
* @rc needs to be referenced
*/
ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
struct uwb_rccb *cmd, size_t cmd_size,
u8 expected_type, u16 expected_event,
struct uwb_rceb **preply)
{
return __uwb_rc_cmd(rc, cmd_name, cmd, cmd_size, NULL, 0,
expected_type, expected_event, preply);
}
EXPORT_SYMBOL_GPL(uwb_rc_vcmd);
/**
* Reset a UWB Host Controller (and all radio settings)
*
* @rc: Host Controller descriptor
* @returns: 0 if ok, < 0 errno code on error
*
* We put the command on kmalloc'ed memory as some arches cannot do
* USB from the stack. The reply event is copied from an stage buffer,
* so it can be in the stack. See WUSB1.0[8.6.2.4] for more details.
*/
int uwb_rc_reset(struct uwb_rc *rc)
{
int result = -ENOMEM;
struct uwb_rc_evt_confirm reply;
struct uwb_rccb *cmd;
size_t cmd_size = sizeof(*cmd);
mutex_lock(&rc->uwb_dev.mutex);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_kzalloc;
cmd->bCommandType = UWB_RC_CET_GENERAL;
cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET);
reply.rceb.bEventType = UWB_RC_CET_GENERAL;
reply.rceb.wEvent = UWB_RC_CMD_RESET;
result = uwb_rc_cmd(rc, "RESET", cmd, cmd_size,
&reply.rceb, sizeof(reply));
if (result < 0)
goto error_cmd;
if (reply.bResultCode != UWB_RC_RES_SUCCESS) {
dev_err(&rc->uwb_dev.dev,
"RESET: command execution failed: %s (%d)\n",
uwb_rc_strerror(reply.bResultCode), reply.bResultCode);
result = -EIO;
}
error_cmd:
kfree(cmd);
error_kzalloc:
mutex_unlock(&rc->uwb_dev.mutex);
return result;
}
int uwbd_msg_handle_reset(struct uwb_event *evt)
{
struct uwb_rc *rc = evt->rc;
int ret;
dev_info(&rc->uwb_dev.dev, "resetting radio controller\n");
ret = rc->reset(rc);
if (ret < 0) {
dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret);
goto error;
}
return 0;
error:
/* Nothing can be done except try the reset again. Wait a bit
to avoid reset loops during probe() or remove(). */
msleep(1000);
uwb_rc_reset_all(rc);
return ret;
}
/**
* uwb_rc_reset_all - request a reset of the radio controller and PALs
* @rc: the radio controller of the hardware device to be reset.
*
* The full hardware reset of the radio controller and all the PALs
* will be scheduled.
*/
void uwb_rc_reset_all(struct uwb_rc *rc)
{
struct uwb_event *evt;
evt = kzalloc(sizeof(struct uwb_event), GFP_ATOMIC);
if (unlikely(evt == NULL))
return;
evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */
evt->ts_jiffies = jiffies;
evt->type = UWB_EVT_TYPE_MSG;
evt->message = UWB_EVT_MSG_RESET;
uwbd_event_queue(evt);
}
EXPORT_SYMBOL_GPL(uwb_rc_reset_all);
void uwb_rc_pre_reset(struct uwb_rc *rc)
{
rc->stop(rc);
uwbd_flush(rc);
uwb_radio_reset_state(rc);
uwb_rsv_remove_all(rc);
}
EXPORT_SYMBOL_GPL(uwb_rc_pre_reset);
int uwb_rc_post_reset(struct uwb_rc *rc)
{
int ret;
ret = rc->start(rc);
if (ret)
goto out;
ret = uwb_rc_mac_addr_set(rc, &rc->uwb_dev.mac_addr);
if (ret)
goto out;
ret = uwb_rc_dev_addr_set(rc, &rc->uwb_dev.dev_addr);
if (ret)
goto out;
out:
return ret;
}
EXPORT_SYMBOL_GPL(uwb_rc_post_reset);