WSL2-Linux-Kernel/fs/btrfs/transaction.c

2398 строки
66 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2007 Oracle. All rights reserved.
*/
#include <linux/fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/writeback.h>
#include <linux/pagemap.h>
#include <linux/blkdev.h>
#include <linux/uuid.h>
#include "ctree.h"
#include "disk-io.h"
#include "transaction.h"
#include "locking.h"
#include "tree-log.h"
#include "inode-map.h"
#include "volumes.h"
#include "dev-replace.h"
Btrfs: rework qgroup accounting Currently qgroups account for space by intercepting delayed ref updates to fs trees. It does this by adding sequence numbers to delayed ref updates so that it can figure out how the tree looked before the update so we can adjust the counters properly. The problem with this is that it does not allow delayed refs to be merged, so if you say are defragging an extent with 5k snapshots pointing to it we will thrash the delayed ref lock because we need to go back and manually merge these things together. Instead we want to process quota changes when we know they are going to happen, like when we first allocate an extent, we free a reference for an extent, we add new references etc. This patch accomplishes this by only adding qgroup operations for real ref changes. We only modify the sequence number when we need to lookup roots for bytenrs, this reduces the amount of churn on the sequence number and allows us to merge delayed refs as we add them most of the time. This patch encompasses a bunch of architectural changes 1) qgroup ref operations: instead of tracking qgroup operations through the delayed refs we simply add new ref operations whenever we notice that we need to when we've modified the refs themselves. 2) tree mod seq: we no longer have this separation of major/minor counters. this makes the sequence number stuff much more sane and we can remove some locking that was needed to protect the counter. 3) delayed ref seq: we now read the tree mod seq number and use that as our sequence. This means each new delayed ref doesn't have it's own unique sequence number, rather whenever we go to lookup backrefs we inc the sequence number so we can make sure to keep any new operations from screwing up our world view at that given point. This allows us to merge delayed refs during runtime. With all of these changes the delayed ref stuff is a little saner and the qgroup accounting stuff no longer goes negative in some cases like it was before. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-05-14 04:30:47 +04:00
#include "qgroup.h"
#include "block-group.h"
#define BTRFS_ROOT_TRANS_TAG 0
static const unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = {
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
[TRANS_STATE_RUNNING] = 0U,
[TRANS_STATE_BLOCKED] = __TRANS_START,
[TRANS_STATE_COMMIT_START] = (__TRANS_START | __TRANS_ATTACH),
[TRANS_STATE_COMMIT_DOING] = (__TRANS_START |
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
__TRANS_ATTACH |
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 11:37:10 +03:00
__TRANS_JOIN |
__TRANS_JOIN_NOSTART),
[TRANS_STATE_UNBLOCKED] = (__TRANS_START |
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
__TRANS_ATTACH |
__TRANS_JOIN |
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 11:37:10 +03:00
__TRANS_JOIN_NOLOCK |
__TRANS_JOIN_NOSTART),
[TRANS_STATE_COMPLETED] = (__TRANS_START |
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
__TRANS_ATTACH |
__TRANS_JOIN |
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 11:37:10 +03:00
__TRANS_JOIN_NOLOCK |
__TRANS_JOIN_NOSTART),
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
};
void btrfs_put_transaction(struct btrfs_transaction *transaction)
{
WARN_ON(refcount_read(&transaction->use_count) == 0);
if (refcount_dec_and_test(&transaction->use_count)) {
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
BUG_ON(!list_empty(&transaction->list));
Btrfs: delayed-refs: use rb_first_cached for href_root rb_first_cached() trades an extra pointer "leftmost" for doing the same job as rb_first() but in O(1). Functions manipulating href_root need to get the first entry, this converts href_root to use rb_first_cached(). This patch is first in the sequenct of similar updates to other rbtrees and this is analysis of the expected behaviour and improvements. There's a common pattern: while (node = rb_first) { entry = rb_entry(node) next = rb_next(node) rb_erase(node) cleanup(entry) } rb_first needs to traverse the tree up to logN depth, rb_erase can completely reshuffle the tree. With the caching we'll skip the traversal in rb_first. That's a cached memory access vs looped pointer dereference trade-off that IMHO has a clear winner. Measurements show there's not much difference in a sample tree with 10000 nodes: 4.5s / rb_first and 4.8s / rb_first_cached. Real effects of caching and pointer chasing are unpredictable though. Further optimzations can be done to avoid the expensive rb_erase step. In some cases it's ok to process the nodes in any order, so the tree can be traversed in post-order, not rebalancing the children nodes and just calling free. Care must be taken regarding the next node. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog from mail discussions ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-08-22 22:51:49 +03:00
WARN_ON(!RB_EMPTY_ROOT(
&transaction->delayed_refs.href_root.rb_root));
if (transaction->delayed_refs.pending_csums)
btrfs_err(transaction->fs_info,
"pending csums is %llu",
transaction->delayed_refs.pending_csums);
/*
* If any block groups are found in ->deleted_bgs then it's
* because the transaction was aborted and a commit did not
* happen (things failed before writing the new superblock
* and calling btrfs_finish_extent_commit()), so we can not
* discard the physical locations of the block groups.
*/
while (!list_empty(&transaction->deleted_bgs)) {
struct btrfs_block_group_cache *cache;
cache = list_first_entry(&transaction->deleted_bgs,
struct btrfs_block_group_cache,
bg_list);
list_del_init(&cache->bg_list);
btrfs_put_block_group_trimming(cache);
btrfs_put_block_group(cache);
}
WARN_ON(!list_empty(&transaction->dev_update_list));
kfree(transaction);
}
}
static noinline void switch_commit_roots(struct btrfs_transaction *trans)
Btrfs: async block group caching This patch moves the caching of the block group off to a kthread in order to allow people to allocate sooner. Instead of blocking up behind the caching mutex, we instead kick of the caching kthread, and then attempt to make an allocation. If we cannot, we wait on the block groups caching waitqueue, which the caching kthread will wake the waiting threads up everytime it finds 2 meg worth of space, and then again when its finished caching. This is how I tested the speedup from this mkfs the disk mount the disk fill the disk up with fs_mark unmount the disk mount the disk time touch /mnt/foo Without my changes this took 11 seconds on my box, with these changes it now takes 1 second. Another change thats been put in place is we lock the super mirror's in the pinned extent map in order to keep us from adding that stuff as free space when caching the block group. This doesn't really change anything else as far as the pinned extent map is concerned, since for actual pinned extents we use EXTENT_DIRTY, but it does mean that when we unmount we have to go in and unlock those extents to keep from leaking memory. I've also added a check where when we are reading block groups from disk, if the amount of space used == the size of the block group, we go ahead and mark the block group as cached. This drastically reduces the amount of time it takes to cache the block groups. Using the same test as above, except doing a dd to a file and then unmounting, it used to take 33 seconds to umount, now it takes 3 seconds. This version uses the commit_root in the caching kthread, and then keeps track of how many async caching threads are running at any given time so if one of the async threads is still running as we cross transactions we can wait until its finished before handling the pinned extents. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-14 05:29:25 +04:00
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_root *root, *tmp;
down_write(&fs_info->commit_root_sem);
list_for_each_entry_safe(root, tmp, &trans->switch_commits,
dirty_list) {
list_del_init(&root->dirty_list);
free_extent_buffer(root->commit_root);
root->commit_root = btrfs_root_node(root);
if (is_fstree(root->root_key.objectid))
btrfs_unpin_free_ino(root);
extent_io_tree_release(&root->dirty_log_pages);
btrfs: qgroup: Introduce per-root swapped blocks infrastructure To allow delayed subtree swap rescan, btrfs needs to record per-root information about which tree blocks get swapped. This patch introduces the required infrastructure. The designed workflow will be: 1) Record the subtree root block that gets swapped. During subtree swap: O = Old tree blocks N = New tree blocks reloc tree subvolume tree X Root Root / \ / \ NA OB OA OB / | | \ / | | \ NC ND OE OF OC OD OE OF In this case, NA and OA are going to be swapped, record (NA, OA) into subvolume tree X. 2) After subtree swap. reloc tree subvolume tree X Root Root / \ / \ OA OB NA OB / | | \ / | | \ OC OD OE OF NC ND OE OF 3a) COW happens for OB If we are going to COW tree block OB, we check OB's bytenr against tree X's swapped_blocks structure. If it doesn't fit any, nothing will happen. 3b) COW happens for NA Check NA's bytenr against tree X's swapped_blocks, and get a hit. Then we do subtree scan on both subtrees OA and NA. Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND). Then no matter what we do to subvolume tree X, qgroup numbers will still be correct. Then NA's record gets removed from X's swapped_blocks. 4) Transaction commit Any record in X's swapped_blocks gets removed, since there is no modification to swapped subtrees, no need to trigger heavy qgroup subtree rescan for them. This will introduce 128 bytes overhead for each btrfs_root even qgroup is not enabled. This is to reduce memory allocations and potential failures. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 10:15:16 +03:00
btrfs_qgroup_clean_swapped_blocks(root);
}
/* We can free old roots now. */
spin_lock(&trans->dropped_roots_lock);
while (!list_empty(&trans->dropped_roots)) {
root = list_first_entry(&trans->dropped_roots,
struct btrfs_root, root_list);
list_del_init(&root->root_list);
spin_unlock(&trans->dropped_roots_lock);
btrfs_drop_and_free_fs_root(fs_info, root);
spin_lock(&trans->dropped_roots_lock);
}
spin_unlock(&trans->dropped_roots_lock);
up_write(&fs_info->commit_root_sem);
Btrfs: async block group caching This patch moves the caching of the block group off to a kthread in order to allow people to allocate sooner. Instead of blocking up behind the caching mutex, we instead kick of the caching kthread, and then attempt to make an allocation. If we cannot, we wait on the block groups caching waitqueue, which the caching kthread will wake the waiting threads up everytime it finds 2 meg worth of space, and then again when its finished caching. This is how I tested the speedup from this mkfs the disk mount the disk fill the disk up with fs_mark unmount the disk mount the disk time touch /mnt/foo Without my changes this took 11 seconds on my box, with these changes it now takes 1 second. Another change thats been put in place is we lock the super mirror's in the pinned extent map in order to keep us from adding that stuff as free space when caching the block group. This doesn't really change anything else as far as the pinned extent map is concerned, since for actual pinned extents we use EXTENT_DIRTY, but it does mean that when we unmount we have to go in and unlock those extents to keep from leaking memory. I've also added a check where when we are reading block groups from disk, if the amount of space used == the size of the block group, we go ahead and mark the block group as cached. This drastically reduces the amount of time it takes to cache the block groups. Using the same test as above, except doing a dd to a file and then unmounting, it used to take 33 seconds to umount, now it takes 3 seconds. This version uses the commit_root in the caching kthread, and then keeps track of how many async caching threads are running at any given time so if one of the async threads is still running as we cross transactions we can wait until its finished before handling the pinned extents. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-14 05:29:25 +04:00
}
static inline void extwriter_counter_inc(struct btrfs_transaction *trans,
unsigned int type)
{
if (type & TRANS_EXTWRITERS)
atomic_inc(&trans->num_extwriters);
}
static inline void extwriter_counter_dec(struct btrfs_transaction *trans,
unsigned int type)
{
if (type & TRANS_EXTWRITERS)
atomic_dec(&trans->num_extwriters);
}
static inline void extwriter_counter_init(struct btrfs_transaction *trans,
unsigned int type)
{
atomic_set(&trans->num_extwriters, ((type & TRANS_EXTWRITERS) ? 1 : 0));
}
static inline int extwriter_counter_read(struct btrfs_transaction *trans)
{
return atomic_read(&trans->num_extwriters);
}
/*
* To be called after all the new block groups attached to the transaction
* handle have been created (btrfs_create_pending_block_groups()).
*/
void btrfs_trans_release_chunk_metadata(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
if (!trans->chunk_bytes_reserved)
return;
WARN_ON_ONCE(!list_empty(&trans->new_bgs));
btrfs_block_rsv_release(fs_info, &fs_info->chunk_block_rsv,
trans->chunk_bytes_reserved);
trans->chunk_bytes_reserved = 0;
}
/*
* either allocate a new transaction or hop into the existing one
*/
static noinline int join_transaction(struct btrfs_fs_info *fs_info,
unsigned int type)
{
struct btrfs_transaction *cur_trans;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_lock(&fs_info->trans_lock);
loop:
/* The file system has been taken offline. No new transactions. */
if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
spin_unlock(&fs_info->trans_lock);
return -EROFS;
}
cur_trans = fs_info->running_transaction;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
if (cur_trans) {
if (cur_trans->aborted) {
spin_unlock(&fs_info->trans_lock);
return cur_trans->aborted;
}
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
if (btrfs_blocked_trans_types[cur_trans->state] & type) {
spin_unlock(&fs_info->trans_lock);
return -EBUSY;
}
refcount_inc(&cur_trans->use_count);
atomic_inc(&cur_trans->num_writers);
extwriter_counter_inc(cur_trans, type);
spin_unlock(&fs_info->trans_lock);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
return 0;
}
spin_unlock(&fs_info->trans_lock);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
/*
* If we are ATTACH, we just want to catch the current transaction,
* and commit it. If there is no transaction, just return ENOENT.
*/
if (type == TRANS_ATTACH)
return -ENOENT;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
/*
* JOIN_NOLOCK only happens during the transaction commit, so
* it is impossible that ->running_transaction is NULL
*/
BUG_ON(type == TRANS_JOIN_NOLOCK);
cur_trans = kmalloc(sizeof(*cur_trans), GFP_NOFS);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
if (!cur_trans)
return -ENOMEM;
spin_lock(&fs_info->trans_lock);
if (fs_info->running_transaction) {
/*
* someone started a transaction after we unlocked. Make sure
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
* to redo the checks above
*/
kfree(cur_trans);
goto loop;
} else if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
spin_unlock(&fs_info->trans_lock);
kfree(cur_trans);
return -EROFS;
}
cur_trans->fs_info = fs_info;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
atomic_set(&cur_trans->num_writers, 1);
extwriter_counter_init(cur_trans, type);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
init_waitqueue_head(&cur_trans->writer_wait);
init_waitqueue_head(&cur_trans->commit_wait);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
cur_trans->state = TRANS_STATE_RUNNING;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
/*
* One for this trans handle, one so it will live on until we
* commit the transaction.
*/
refcount_set(&cur_trans->use_count, 2);
cur_trans->flags = 0;
cur_trans->start_time = ktime_get_seconds();
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
memset(&cur_trans->delayed_refs, 0, sizeof(cur_trans->delayed_refs));
Btrfs: delayed-refs: use rb_first_cached for href_root rb_first_cached() trades an extra pointer "leftmost" for doing the same job as rb_first() but in O(1). Functions manipulating href_root need to get the first entry, this converts href_root to use rb_first_cached(). This patch is first in the sequenct of similar updates to other rbtrees and this is analysis of the expected behaviour and improvements. There's a common pattern: while (node = rb_first) { entry = rb_entry(node) next = rb_next(node) rb_erase(node) cleanup(entry) } rb_first needs to traverse the tree up to logN depth, rb_erase can completely reshuffle the tree. With the caching we'll skip the traversal in rb_first. That's a cached memory access vs looped pointer dereference trade-off that IMHO has a clear winner. Measurements show there's not much difference in a sample tree with 10000 nodes: 4.5s / rb_first and 4.8s / rb_first_cached. Real effects of caching and pointer chasing are unpredictable though. Further optimzations can be done to avoid the expensive rb_erase step. In some cases it's ok to process the nodes in any order, so the tree can be traversed in post-order, not rebalancing the children nodes and just calling free. Care must be taken regarding the next node. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog from mail discussions ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-08-22 22:51:49 +03:00
cur_trans->delayed_refs.href_root = RB_ROOT_CACHED;
cur_trans->delayed_refs.dirty_extent_root = RB_ROOT;
atomic_set(&cur_trans->delayed_refs.num_entries, 0);
/*
* although the tree mod log is per file system and not per transaction,
* the log must never go across transaction boundaries.
*/
smp_mb();
if (!list_empty(&fs_info->tree_mod_seq_list))
WARN(1, KERN_ERR "BTRFS: tree_mod_seq_list not empty when creating a fresh transaction\n");
if (!RB_EMPTY_ROOT(&fs_info->tree_mod_log))
WARN(1, KERN_ERR "BTRFS: tree_mod_log rb tree not empty when creating a fresh transaction\n");
atomic64_set(&fs_info->tree_mod_seq, 0);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_lock_init(&cur_trans->delayed_refs.lock);
INIT_LIST_HEAD(&cur_trans->pending_snapshots);
INIT_LIST_HEAD(&cur_trans->dev_update_list);
INIT_LIST_HEAD(&cur_trans->switch_commits);
INIT_LIST_HEAD(&cur_trans->dirty_bgs);
INIT_LIST_HEAD(&cur_trans->io_bgs);
INIT_LIST_HEAD(&cur_trans->dropped_roots);
mutex_init(&cur_trans->cache_write_mutex);
spin_lock_init(&cur_trans->dirty_bgs_lock);
INIT_LIST_HEAD(&cur_trans->deleted_bgs);
spin_lock_init(&cur_trans->dropped_roots_lock);
list_add_tail(&cur_trans->list, &fs_info->trans_list);
extent_io_tree_init(fs_info, &cur_trans->dirty_pages,
IO_TREE_TRANS_DIRTY_PAGES, fs_info->btree_inode);
fs_info->generation++;
cur_trans->transid = fs_info->generation;
fs_info->running_transaction = cur_trans;
cur_trans->aborted = 0;
spin_unlock(&fs_info->trans_lock);
return 0;
}
/*
* this does all the record keeping required to make sure that a reference
* counted root is properly recorded in a given transaction. This is required
* to make sure the old root from before we joined the transaction is deleted
* when the transaction commits
*/
static int record_root_in_trans(struct btrfs_trans_handle *trans,
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
struct btrfs_root *root,
int force)
{
struct btrfs_fs_info *fs_info = root->fs_info;
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
if ((test_bit(BTRFS_ROOT_REF_COWS, &root->state) &&
root->last_trans < trans->transid) || force) {
WARN_ON(root == fs_info->extent_root);
WARN_ON(!force && root->commit_root != root->node);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
/*
* see below for IN_TRANS_SETUP usage rules
* we have the reloc mutex held now, so there
* is only one writer in this function
*/
set_bit(BTRFS_ROOT_IN_TRANS_SETUP, &root->state);
/* make sure readers find IN_TRANS_SETUP before
* they find our root->last_trans update
*/
smp_wmb();
spin_lock(&fs_info->fs_roots_radix_lock);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
if (root->last_trans == trans->transid && !force) {
spin_unlock(&fs_info->fs_roots_radix_lock);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
return 0;
}
radix_tree_tag_set(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
spin_unlock(&fs_info->fs_roots_radix_lock);
root->last_trans = trans->transid;
/* this is pretty tricky. We don't want to
* take the relocation lock in btrfs_record_root_in_trans
* unless we're really doing the first setup for this root in
* this transaction.
*
* Normally we'd use root->last_trans as a flag to decide
* if we want to take the expensive mutex.
*
* But, we have to set root->last_trans before we
* init the relocation root, otherwise, we trip over warnings
* in ctree.c. The solution used here is to flag ourselves
* with root IN_TRANS_SETUP. When this is 1, we're still
* fixing up the reloc trees and everyone must wait.
*
* When this is zero, they can trust root->last_trans and fly
* through btrfs_record_root_in_trans without having to take the
* lock. smp_wmb() makes sure that all the writes above are
* done before we pop in the zero below
*/
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
btrfs_init_reloc_root(trans, root);
smp_mb__before_atomic();
clear_bit(BTRFS_ROOT_IN_TRANS_SETUP, &root->state);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
}
return 0;
}
void btrfs_add_dropped_root(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_transaction *cur_trans = trans->transaction;
/* Add ourselves to the transaction dropped list */
spin_lock(&cur_trans->dropped_roots_lock);
list_add_tail(&root->root_list, &cur_trans->dropped_roots);
spin_unlock(&cur_trans->dropped_roots_lock);
/* Make sure we don't try to update the root at commit time */
spin_lock(&fs_info->fs_roots_radix_lock);
radix_tree_tag_clear(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
spin_unlock(&fs_info->fs_roots_radix_lock);
}
int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
if (!test_bit(BTRFS_ROOT_REF_COWS, &root->state))
return 0;
/*
* see record_root_in_trans for comments about IN_TRANS_SETUP usage
* and barriers
*/
smp_rmb();
if (root->last_trans == trans->transid &&
!test_bit(BTRFS_ROOT_IN_TRANS_SETUP, &root->state))
return 0;
mutex_lock(&fs_info->reloc_mutex);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
record_root_in_trans(trans, root, 0);
mutex_unlock(&fs_info->reloc_mutex);
return 0;
}
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
static inline int is_transaction_blocked(struct btrfs_transaction *trans)
{
return (trans->state >= TRANS_STATE_BLOCKED &&
trans->state < TRANS_STATE_UNBLOCKED &&
!trans->aborted);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
}
/* wait for commit against the current transaction to become unblocked
* when this is done, it is safe to start a new transaction, but the current
* transaction might not be fully on disk.
*/
static void wait_current_trans(struct btrfs_fs_info *fs_info)
{
struct btrfs_transaction *cur_trans;
spin_lock(&fs_info->trans_lock);
cur_trans = fs_info->running_transaction;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
if (cur_trans && is_transaction_blocked(cur_trans)) {
refcount_inc(&cur_trans->use_count);
spin_unlock(&fs_info->trans_lock);
wait_event(fs_info->transaction_wait,
cur_trans->state >= TRANS_STATE_UNBLOCKED ||
cur_trans->aborted);
btrfs_put_transaction(cur_trans);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
} else {
spin_unlock(&fs_info->trans_lock);
}
}
static int may_wait_transaction(struct btrfs_fs_info *fs_info, int type)
{
if (test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags))
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
return 0;
if (type == TRANS_START)
return 1;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
return 0;
}
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 17:47:45 +04:00
static inline bool need_reserve_reloc_root(struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
if (!fs_info->reloc_ctl ||
!test_bit(BTRFS_ROOT_REF_COWS, &root->state) ||
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 17:47:45 +04:00
root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID ||
root->reloc_root)
return false;
return true;
}
static struct btrfs_trans_handle *
start_transaction(struct btrfs_root *root, unsigned int num_items,
unsigned int type, enum btrfs_reserve_flush_enum flush,
bool enforce_qgroups)
{
struct btrfs_fs_info *fs_info = root->fs_info;
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 18:20:33 +03:00
struct btrfs_block_rsv *delayed_refs_rsv = &fs_info->delayed_refs_rsv;
struct btrfs_trans_handle *h;
struct btrfs_transaction *cur_trans;
u64 num_bytes = 0;
u64 qgroup_reserved = 0;
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 17:47:45 +04:00
bool reloc_reserved = false;
int ret;
/* Send isn't supposed to start transactions. */
ASSERT(current->journal_info != BTRFS_SEND_TRANS_STUB);
if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state))
return ERR_PTR(-EROFS);
if (current->journal_info) {
WARN_ON(type & TRANS_EXTWRITERS);
h = current->journal_info;
refcount_inc(&h->use_count);
WARN_ON(refcount_read(&h->use_count) > 2);
h->orig_rsv = h->block_rsv;
h->block_rsv = NULL;
goto got_it;
}
/*
* Do the reservation before we join the transaction so we can do all
* the appropriate flushing if need be.
*/
if (num_items && root != fs_info->chunk_root) {
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 18:20:33 +03:00
struct btrfs_block_rsv *rsv = &fs_info->trans_block_rsv;
u64 delayed_refs_bytes = 0;
qgroup_reserved = num_items * fs_info->nodesize;
ret = btrfs_qgroup_reserve_meta_pertrans(root, qgroup_reserved,
enforce_qgroups);
if (ret)
return ERR_PTR(ret);
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 18:20:33 +03:00
/*
* We want to reserve all the bytes we may need all at once, so
* we only do 1 enospc flushing cycle per transaction start. We
* accomplish this by simply assuming we'll do 2 x num_items
* worth of delayed refs updates in this trans handle, and
* refill that amount for whatever is missing in the reserve.
*/
num_bytes = btrfs_calc_trans_metadata_size(fs_info, num_items);
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 18:20:33 +03:00
if (delayed_refs_rsv->full == 0) {
delayed_refs_bytes = num_bytes;
num_bytes <<= 1;
}
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 17:47:45 +04:00
/*
* Do the reservation for the relocation root creation
*/
if (need_reserve_reloc_root(root)) {
num_bytes += fs_info->nodesize;
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 17:47:45 +04:00
reloc_reserved = true;
}
btrfs: introduce delayed_refs_rsv Traditionally we've had voodoo in btrfs to account for the space that delayed refs may take up by having a global_block_rsv. This works most of the time, except when it doesn't. We've had issues reported and seen in production where sometimes the global reserve is exhausted during transaction commit before we can run all of our delayed refs, resulting in an aborted transaction. Because of this voodoo we have equally dubious flushing semantics around throttling delayed refs which we often get wrong. So instead give them their own block_rsv. This way we can always know exactly how much outstanding space we need for delayed refs. This allows us to make sure we are constantly filling that reservation up with space, and allows us to put more precise pressure on the enospc system. Instead of doing math to see if its a good time to throttle, the normal enospc code will be invoked if we have a lot of delayed refs pending, and they will be run via the normal flushing mechanism. For now the delayed_refs_rsv will hold the reservations for the delayed refs, the block group updates, and deleting csums. We could have a separate rsv for the block group updates, but the csum deletion stuff is still handled via the delayed_refs so that will stay there. Historical background: The global reserve has grown to cover everything we don't reserve space explicitly for, and we've grown a lot of weird ad-hoc heuristics to know if we're running short on space and when it's time to force a commit. A failure rate of 20-40 file systems when we run hundreds of thousands of them isn't super high, but cleaning up this code will make things less ugly and more predictible. Thus the delayed refs rsv. We always know how many delayed refs we have outstanding, and although running them generates more we can use the global reserve for that spill over, which fits better into it's desired use than a full blown reservation. This first approach is to simply take how many times we're reserving space for and multiply that by 2 in order to save enough space for the delayed refs that could be generated. This is a niave approach and will probably evolve, but for now it works. Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> # high-level review [ added background notes from the cover letter ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-12-03 18:20:33 +03:00
ret = btrfs_block_rsv_add(root, rsv, num_bytes, flush);
if (ret)
goto reserve_fail;
if (delayed_refs_bytes) {
btrfs_migrate_to_delayed_refs_rsv(fs_info, rsv,
delayed_refs_bytes);
num_bytes -= delayed_refs_bytes;
}
} else if (num_items == 0 && flush == BTRFS_RESERVE_FLUSH_ALL &&
!delayed_refs_rsv->full) {
/*
* Some people call with btrfs_start_transaction(root, 0)
* because they can be throttled, but have some other mechanism
* for reserving space. We still want these guys to refill the
* delayed block_rsv so just add 1 items worth of reservation
* here.
*/
ret = btrfs_delayed_refs_rsv_refill(fs_info, flush);
if (ret)
goto reserve_fail;
}
again:
h = kmem_cache_zalloc(btrfs_trans_handle_cachep, GFP_NOFS);
if (!h) {
ret = -ENOMEM;
goto alloc_fail;
}
/*
* If we are JOIN_NOLOCK we're already committing a transaction and
* waiting on this guy, so we don't need to do the sb_start_intwrite
* because we're already holding a ref. We need this because we could
* have raced in and did an fsync() on a file which can kick a commit
* and then we deadlock with somebody doing a freeze.
*
* If we are ATTACH, it means we just want to catch the current
* transaction and commit it, so we needn't do sb_start_intwrite().
*/
if (type & __TRANS_FREEZABLE)
sb_start_intwrite(fs_info->sb);
if (may_wait_transaction(fs_info, type))
wait_current_trans(fs_info);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
do {
ret = join_transaction(fs_info, type);
if (ret == -EBUSY) {
wait_current_trans(fs_info);
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 11:37:10 +03:00
if (unlikely(type == TRANS_ATTACH ||
type == TRANS_JOIN_NOSTART))
ret = -ENOENT;
}
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
} while (ret == -EBUSY);
if (ret < 0)
goto join_fail;
cur_trans = fs_info->running_transaction;
h->transid = cur_trans->transid;
h->transaction = cur_trans;
h->root = root;
refcount_set(&h->use_count, 1);
h->fs_info = root->fs_info;
h->type = type;
Btrfs: fix deadlock when finalizing block group creation Josef ran into a deadlock while a transaction handle was finalizing the creation of its block groups, which produced the following trace: [260445.593112] fio D ffff88022a9df468 0 8924 4518 0x00000084 [260445.593119] ffff88022a9df468 ffffffff81c134c0 ffff880429693c00 ffff88022a9df488 [260445.593126] ffff88022a9e0000 ffff8803490d7b00 ffff8803490d7b18 ffff88022a9df4b0 [260445.593132] ffff8803490d7af8 ffff88022a9df488 ffffffff8175a437 ffff8803490d7b00 [260445.593137] Call Trace: [260445.593145] [<ffffffff8175a437>] schedule+0x37/0x80 [260445.593189] [<ffffffffa0850f37>] btrfs_tree_lock+0xa7/0x1f0 [btrfs] [260445.593197] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0 [260445.593225] [<ffffffffa07eac44>] btrfs_lock_root_node+0x34/0x50 [btrfs] [260445.593253] [<ffffffffa07eff6b>] btrfs_search_slot+0x88b/0xa00 [btrfs] [260445.593295] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs] [260445.593324] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [260445.593351] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [260445.593394] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs] [260445.593427] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs] [260445.593459] [<ffffffffa0800964>] do_chunk_alloc+0x2a4/0x2e0 [btrfs] [260445.593491] [<ffffffffa0803815>] find_free_extent+0xa55/0xd90 [btrfs] [260445.593524] [<ffffffffa0803c22>] btrfs_reserve_extent+0xd2/0x220 [btrfs] [260445.593532] [<ffffffff8119fe5d>] ? account_page_dirtied+0xdd/0x170 [260445.593564] [<ffffffffa0803e78>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs] [260445.593597] [<ffffffffa080c9de>] ? btree_set_page_dirty+0xe/0x10 [btrfs] [260445.593626] [<ffffffffa07eb5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs] [260445.593654] [<ffffffffa07ebbff>] btrfs_cow_block+0x11f/0x1c0 [btrfs] [260445.593682] [<ffffffffa07ef8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs] [260445.593724] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs] [260445.593752] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [260445.593830] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [260445.593905] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs] [260445.593946] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs] [260445.593990] [<ffffffffa0815798>] btrfs_commit_transaction+0xa8/0xb40 [btrfs] [260445.594042] [<ffffffffa085abcd>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs] [260445.594089] [<ffffffffa082bc84>] btrfs_sync_file+0x294/0x350 [btrfs] [260445.594115] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0 [260445.594133] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180 [260445.594149] [<ffffffff8123e35d>] do_fsync+0x3d/0x70 [260445.594169] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110 [260445.594187] [<ffffffff8123e600>] SyS_fsync+0x10/0x20 [260445.594204] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71 This happened because the same transaction handle created a large number of block groups and while finalizing their creation (inserting new items and updating existing items in the chunk and device trees) a new metadata extent had to be allocated and no free space was found in the current metadata block groups, which made find_free_extent() attempt to allocate a new block group via do_chunk_alloc(). However at do_chunk_alloc() we ended up allocating a new system chunk too and exceeded the threshold of 2Mb of reserved chunk bytes, which makes do_chunk_alloc() enter the final part of block group creation again (at btrfs_create_pending_block_groups()) and attempt to lock again the root of the chunk tree when it's already write locked by the same task. Similarly we can deadlock on extent tree nodes/leafs if while we are running delayed references we end up creating a new metadata block group in order to allocate a new node/leaf for the extent tree (as part of a CoW operation or growing the tree), as btrfs_create_pending_block_groups inserts items into the extent tree as well. In this case we get the following trace: [14242.773581] fio D ffff880428ca3418 0 3615 3100 0x00000084 [14242.773588] ffff880428ca3418 ffff88042d66b000 ffff88042a03c800 ffff880428ca3438 [14242.773594] ffff880428ca4000 ffff8803e4b20190 ffff8803e4b201a8 ffff880428ca3460 [14242.773600] ffff8803e4b20188 ffff880428ca3438 ffffffff8175a437 ffff8803e4b20190 [14242.773606] Call Trace: [14242.773613] [<ffffffff8175a437>] schedule+0x37/0x80 [14242.773656] [<ffffffffa057ff07>] btrfs_tree_lock+0xa7/0x1f0 [btrfs] [14242.773664] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0 [14242.773692] [<ffffffffa0519c44>] btrfs_lock_root_node+0x34/0x50 [btrfs] [14242.773720] [<ffffffffa051ef6b>] btrfs_search_slot+0x88b/0xa00 [btrfs] [14242.773750] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [14242.773758] [<ffffffff811ef4a2>] ? kmem_cache_alloc+0x1d2/0x200 [14242.773786] [<ffffffffa0520ad1>] btrfs_insert_item+0x71/0xf0 [btrfs] [14242.773818] [<ffffffffa052f292>] btrfs_create_pending_block_groups+0x102/0x200 [btrfs] [14242.773850] [<ffffffffa052f96e>] do_chunk_alloc+0x2ae/0x2f0 [btrfs] [14242.773934] [<ffffffffa0532825>] find_free_extent+0xa55/0xd90 [btrfs] [14242.773998] [<ffffffffa0532c22>] btrfs_reserve_extent+0xc2/0x1d0 [btrfs] [14242.774041] [<ffffffffa0532e38>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs] [14242.774078] [<ffffffffa051a5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs] [14242.774118] [<ffffffffa051abff>] btrfs_cow_block+0x11f/0x1c0 [btrfs] [14242.774155] [<ffffffffa051e8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs] [14242.774194] [<ffffffffa0528021>] ? __btrfs_free_extent.isra.70+0x2e1/0xcb0 [btrfs] [14242.774235] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [14242.774274] [<ffffffffa051994a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [14242.774318] [<ffffffffa052c433>] __btrfs_run_delayed_refs+0xbb3/0x1020 [btrfs] [14242.774358] [<ffffffffa052f404>] btrfs_run_delayed_refs.part.78+0x74/0x280 [btrfs] [14242.774391] [<ffffffffa052f627>] btrfs_run_delayed_refs+0x17/0x20 [btrfs] [14242.774432] [<ffffffffa05be236>] commit_cowonly_roots+0x8d/0x2bd [btrfs] [14242.774474] [<ffffffffa059d07f>] ? __btrfs_run_delayed_items+0x1cf/0x210 [btrfs] [14242.774516] [<ffffffffa05adac3>] ? btrfs_qgroup_account_extents+0x83/0x130 [btrfs] [14242.774558] [<ffffffffa0544c40>] btrfs_commit_transaction+0x590/0xb40 [btrfs] [14242.774599] [<ffffffffa0589b9d>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs] [14242.774642] [<ffffffffa055ac54>] btrfs_sync_file+0x294/0x350 [btrfs] [14242.774650] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0 [14242.774657] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180 [14242.774663] [<ffffffff8123e35d>] do_fsync+0x3d/0x70 [14242.774669] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110 [14242.774675] [<ffffffff8123e600>] SyS_fsync+0x10/0x20 [14242.774681] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71 Fix this by never recursing into the finalization phase of block group creation and making sure we never trigger the finalization of block group creation while running delayed references. Reported-by: Josef Bacik <jbacik@fb.com> Fixes: 00d80e342c0f ("Btrfs: fix quick exhaustion of the system array in the superblock") Signed-off-by: Filipe Manana <fdmanana@suse.com>
2015-10-03 15:13:13 +03:00
h->can_flush_pending_bgs = true;
INIT_LIST_HEAD(&h->new_bgs);
smp_mb();
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
if (cur_trans->state >= TRANS_STATE_BLOCKED &&
may_wait_transaction(fs_info, type)) {
Btrfs: fix crash when starting transaction Often when starting a transaction we commit the currently running transaction, which can end up writing block group caches when the current process has its journal_info set to NULL (and not to a transaction). This makes our assertion at btrfs_check_data_free_space() (current_journal != NULL) fail, resulting in a crash/hang. Therefore fix it by setting journal_info. Two different traces of this issue follow below. 1) [51502.241936] BTRFS: assertion failed: current->journal_info, file: fs/btrfs/extent-tree.c, line: 3670 [51502.242213] ------------[ cut here ]------------ [51502.242493] kernel BUG at fs/btrfs/ctree.h:3964! [51502.242669] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC (...) [51502.244010] Call Trace: [51502.244010] [<ffffffffa02bc025>] btrfs_check_data_free_space+0x395/0x3a0 [btrfs] [51502.244010] [<ffffffffa02c3bdc>] btrfs_write_dirty_block_groups+0x4ac/0x640 [btrfs] [51502.244010] [<ffffffffa0357a6a>] commit_cowonly_roots+0x164/0x226 [btrfs] [51502.244010] [<ffffffffa02d53cd>] btrfs_commit_transaction+0x4ed/0xab0 [btrfs] [51502.244010] [<ffffffff8168ec7b>] ? _raw_spin_unlock+0x2b/0x40 [51502.244010] [<ffffffffa02d6259>] start_transaction+0x459/0x620 [btrfs] [51502.244010] [<ffffffffa02d67ab>] btrfs_start_transaction+0x1b/0x20 [btrfs] [51502.244010] [<ffffffffa02d73e1>] __unlink_start_trans+0x31/0xe0 [btrfs] [51502.244010] [<ffffffffa02dea67>] btrfs_unlink+0x37/0xc0 [btrfs] [51502.244010] [<ffffffff811bb054>] ? do_unlinkat+0x114/0x2a0 [51502.244010] [<ffffffff811baebc>] vfs_unlink+0xcc/0x150 [51502.244010] [<ffffffff811bb1a0>] do_unlinkat+0x260/0x2a0 [51502.244010] [<ffffffff811a9ef4>] ? filp_close+0x64/0x90 [51502.244010] [<ffffffff810aaea6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [51502.244010] [<ffffffff81349cab>] ? trace_hardirqs_on_thunk+0x3a/0x3f [51502.244010] [<ffffffff811be9eb>] SyS_unlinkat+0x1b/0x40 [51502.244010] [<ffffffff81698452>] system_call_fastpath+0x16/0x1b [51502.244010] Code: 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 89 f1 48 c7 c2 71 13 36 a0 48 89 fe 31 c0 48 c7 c7 b8 43 36 a0 48 89 e5 e8 5d b0 32 e1 <0f> 0b 0f 1f 44 00 00 55 b9 11 00 00 00 48 89 e5 41 55 49 89 f5 [51502.244010] RIP [<ffffffffa03575da>] assfail.constprop.88+0x1e/0x20 [btrfs] 2) [25405.097230] BTRFS: assertion failed: current->journal_info, file: fs/btrfs/extent-tree.c, line: 3670 [25405.097488] ------------[ cut here ]------------ [25405.097767] kernel BUG at fs/btrfs/ctree.h:3964! [25405.097940] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC (...) [25405.100008] Call Trace: [25405.100008] [<ffffffffa02bc025>] btrfs_check_data_free_space+0x395/0x3a0 [btrfs] [25405.100008] [<ffffffffa02c3bdc>] btrfs_write_dirty_block_groups+0x4ac/0x640 [btrfs] [25405.100008] [<ffffffffa035755a>] commit_cowonly_roots+0x164/0x226 [btrfs] [25405.100008] [<ffffffffa02d53cd>] btrfs_commit_transaction+0x4ed/0xab0 [btrfs] [25405.100008] [<ffffffff8109c170>] ? bit_waitqueue+0xc0/0xc0 [25405.100008] [<ffffffffa02d6259>] start_transaction+0x459/0x620 [btrfs] [25405.100008] [<ffffffffa02d67ab>] btrfs_start_transaction+0x1b/0x20 [btrfs] [25405.100008] [<ffffffffa02e3407>] btrfs_create+0x47/0x210 [btrfs] [25405.100008] [<ffffffffa02d74cc>] ? btrfs_permission+0x3c/0x80 [btrfs] [25405.100008] [<ffffffff811bc63b>] vfs_create+0x9b/0x130 [25405.100008] [<ffffffff811bcf19>] do_last+0x849/0xe20 [25405.100008] [<ffffffff811b9409>] ? link_path_walk+0x79/0x820 [25405.100008] [<ffffffff811bd5b5>] path_openat+0xc5/0x690 [25405.100008] [<ffffffff810ab07d>] ? trace_hardirqs_on+0xd/0x10 [25405.100008] [<ffffffff811cdcd2>] ? __alloc_fd+0x32/0x1d0 [25405.100008] [<ffffffff811be2a3>] do_filp_open+0x43/0xa0 [25405.100008] [<ffffffff811cddf1>] ? __alloc_fd+0x151/0x1d0 [25405.100008] [<ffffffff811abcfc>] do_sys_open+0x13c/0x230 [25405.100008] [<ffffffff810aaea6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [25405.100008] [<ffffffff811abe12>] SyS_open+0x22/0x30 [25405.100008] [<ffffffff81698452>] system_call_fastpath+0x16/0x1b [25405.100008] Code: 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 89 f1 48 c7 c2 51 13 36 a0 48 89 fe 31 c0 48 c7 c7 d0 43 36 a0 48 89 e5 e8 6d b5 32 e1 <0f> 0b 0f 1f 44 00 00 55 b9 11 00 00 00 48 89 e5 41 55 49 89 f5 [25405.100008] RIP [<ffffffffa03570ca>] assfail.constprop.88+0x1e/0x20 [btrfs] Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-24 20:46:58 +04:00
current->journal_info = h;
btrfs_commit_transaction(h);
goto again;
}
if (num_bytes) {
trace_btrfs_space_reservation(fs_info, "transaction",
h->transid, num_bytes, 1);
h->block_rsv = &fs_info->trans_block_rsv;
h->bytes_reserved = num_bytes;
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 17:47:45 +04:00
h->reloc_reserved = reloc_reserved;
}
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 00:12:44 +04:00
got_it:
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
btrfs_record_root_in_trans(h, root);
if (!current->journal_info)
current->journal_info = h;
return h;
join_fail:
if (type & __TRANS_FREEZABLE)
sb_end_intwrite(fs_info->sb);
kmem_cache_free(btrfs_trans_handle_cachep, h);
alloc_fail:
if (num_bytes)
btrfs_block_rsv_release(fs_info, &fs_info->trans_block_rsv,
num_bytes);
reserve_fail:
btrfs_qgroup_free_meta_pertrans(root, qgroup_reserved);
return ERR_PTR(ret);
}
struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
unsigned int num_items)
{
return start_transaction(root, num_items, TRANS_START,
BTRFS_RESERVE_FLUSH_ALL, true);
}
struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
struct btrfs_root *root,
unsigned int num_items,
int min_factor)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_trans_handle *trans;
u64 num_bytes;
int ret;
/*
* We have two callers: unlink and block group removal. The
* former should succeed even if we will temporarily exceed
* quota and the latter operates on the extent root so
* qgroup enforcement is ignored anyway.
*/
trans = start_transaction(root, num_items, TRANS_START,
BTRFS_RESERVE_FLUSH_ALL, false);
if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
return trans;
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans))
return trans;
num_bytes = btrfs_calc_trans_metadata_size(fs_info, num_items);
ret = btrfs_cond_migrate_bytes(fs_info, &fs_info->trans_block_rsv,
num_bytes, min_factor);
if (ret) {
btrfs_end_transaction(trans);
return ERR_PTR(ret);
}
trans->block_rsv = &fs_info->trans_block_rsv;
trans->bytes_reserved = num_bytes;
trace_btrfs_space_reservation(fs_info, "transaction",
trans->transid, num_bytes, 1);
return trans;
}
struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root)
{
return start_transaction(root, 0, TRANS_JOIN, BTRFS_RESERVE_NO_FLUSH,
true);
}
struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root)
{
return start_transaction(root, 0, TRANS_JOIN_NOLOCK,
BTRFS_RESERVE_NO_FLUSH, true);
}
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 11:37:10 +03:00
/*
* Similar to regular join but it never starts a transaction when none is
* running or after waiting for the current one to finish.
*/
struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root)
{
return start_transaction(root, 0, TRANS_JOIN_NOSTART,
BTRFS_RESERVE_NO_FLUSH, true);
}
/*
* btrfs_attach_transaction() - catch the running transaction
*
* It is used when we want to commit the current the transaction, but
* don't want to start a new one.
*
* Note: If this function return -ENOENT, it just means there is no
* running transaction. But it is possible that the inactive transaction
* is still in the memory, not fully on disk. If you hope there is no
* inactive transaction in the fs when -ENOENT is returned, you should
* invoke
* btrfs_attach_transaction_barrier()
*/
struct btrfs_trans_handle *btrfs_attach_transaction(struct btrfs_root *root)
{
return start_transaction(root, 0, TRANS_ATTACH,
BTRFS_RESERVE_NO_FLUSH, true);
}
/*
* btrfs_attach_transaction_barrier() - catch the running transaction
*
* It is similar to the above function, the difference is this one
* will wait for all the inactive transactions until they fully
* complete.
*/
struct btrfs_trans_handle *
btrfs_attach_transaction_barrier(struct btrfs_root *root)
{
struct btrfs_trans_handle *trans;
trans = start_transaction(root, 0, TRANS_ATTACH,
BTRFS_RESERVE_NO_FLUSH, true);
if (trans == ERR_PTR(-ENOENT))
btrfs_wait_for_commit(root->fs_info, 0);
return trans;
}
/* wait for a transaction commit to be fully complete */
static noinline void wait_for_commit(struct btrfs_transaction *commit)
{
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
wait_event(commit->commit_wait, commit->state == TRANS_STATE_COMPLETED);
}
int btrfs_wait_for_commit(struct btrfs_fs_info *fs_info, u64 transid)
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
{
struct btrfs_transaction *cur_trans = NULL, *t;
int ret = 0;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
if (transid) {
if (transid <= fs_info->last_trans_committed)
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
goto out;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
/* find specified transaction */
spin_lock(&fs_info->trans_lock);
list_for_each_entry(t, &fs_info->trans_list, list) {
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
if (t->transid == transid) {
cur_trans = t;
refcount_inc(&cur_trans->use_count);
ret = 0;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
break;
}
if (t->transid > transid) {
ret = 0;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
break;
}
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
}
spin_unlock(&fs_info->trans_lock);
/*
* The specified transaction doesn't exist, or we
* raced with btrfs_commit_transaction
*/
if (!cur_trans) {
if (transid > fs_info->last_trans_committed)
ret = -EINVAL;
goto out;
}
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
} else {
/* find newest transaction that is committing | committed */
spin_lock(&fs_info->trans_lock);
list_for_each_entry_reverse(t, &fs_info->trans_list,
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
list) {
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
if (t->state >= TRANS_STATE_COMMIT_START) {
if (t->state == TRANS_STATE_COMPLETED)
break;
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
cur_trans = t;
refcount_inc(&cur_trans->use_count);
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
break;
}
}
spin_unlock(&fs_info->trans_lock);
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
if (!cur_trans)
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
goto out; /* nothing committing|committed */
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
}
wait_for_commit(cur_trans);
btrfs_put_transaction(cur_trans);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
out:
Btrfs: add START_SYNC, WAIT_SYNC ioctls START_SYNC will start a sync/commit, but not wait for it to complete. Any modification started after the ioctl returns is guaranteed not to be included in the commit. If a non-NULL pointer is passed, the transaction id will be returned to userspace. WAIT_SYNC will wait for any in-progress commit to complete. If a transaction id is specified, the ioctl will block and then return (success) when the specified transaction has committed. If it has already committed when we call the ioctl, it returns immediately. If the specified transaction doesn't exist, it returns EINVAL. If no transaction id is specified, WAIT_SYNC will wait for the currently committing transaction to finish it's commit to disk. If there is no currently committing transaction, it returns success. These ioctls are useful for applications which want to impose an ordering on when fs modifications reach disk, but do not want to wait for the full (slow) commit process to do so. Picky callers can take the transid returned by START_SYNC and feed it to WAIT_SYNC, and be certain to wait only as long as necessary for the transaction _they_ started to reach disk. Sloppy callers can START_SYNC and WAIT_SYNC without a transid, and provided they didn't wait too long between the calls, they will get the same result. However, if a second commit starts before they call WAIT_SYNC, they may end up waiting longer for it to commit as well. Even so, a START_SYNC+WAIT_SYNC still guarantees that any operation completed before the START_SYNC reaches disk. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 23:41:32 +04:00
return ret;
}
void btrfs_throttle(struct btrfs_fs_info *fs_info)
{
wait_current_trans(fs_info);
}
static int should_end_transaction(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
if (btrfs_check_space_for_delayed_refs(fs_info))
return 1;
return !!btrfs_block_rsv_check(&fs_info->global_block_rsv, 5);
}
int btrfs_should_end_transaction(struct btrfs_trans_handle *trans)
{
struct btrfs_transaction *cur_trans = trans->transaction;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
smp_mb();
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
if (cur_trans->state >= TRANS_STATE_BLOCKED ||
cur_trans->delayed_refs.flushing)
return 1;
return should_end_transaction(trans);
}
static void btrfs_trans_release_metadata(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
if (!trans->block_rsv) {
ASSERT(!trans->bytes_reserved);
return;
}
if (!trans->bytes_reserved)
return;
ASSERT(trans->block_rsv == &fs_info->trans_block_rsv);
trace_btrfs_space_reservation(fs_info, "transaction",
trans->transid, trans->bytes_reserved, 0);
btrfs_block_rsv_release(fs_info, trans->block_rsv,
trans->bytes_reserved);
trans->bytes_reserved = 0;
}
static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
int throttle)
{
struct btrfs_fs_info *info = trans->fs_info;
struct btrfs_transaction *cur_trans = trans->transaction;
int lock = (trans->type != TRANS_JOIN_NOLOCK);
int err = 0;
if (refcount_read(&trans->use_count) > 1) {
refcount_dec(&trans->use_count);
trans->block_rsv = trans->orig_rsv;
return 0;
}
btrfs_trans_release_metadata(trans);
trans->block_rsv = NULL;
btrfs_create_pending_block_groups(trans);
Btrfs: fix -ENOSPC when finishing block group creation While creating a block group, we often end up getting ENOSPC while updating the chunk tree, which leads to a transaction abortion that produces a trace like the following: [30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]() [30670.117777] BTRFS: Transaction aborted (error -28) (...) [30670.163567] Call Trace: [30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b [30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad [30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb [30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48 [30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs] [30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs] [30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs] [30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs] [30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs] [30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15 [30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de [30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f [30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62 [30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [30670.187792] ---[ end trace 0373e6b491c4a8cc ]--- This is because we don't do proper space reservation for the chunk block reserve when we have multiple tasks allocating chunks in parallel. So block group creation has 2 phases, and the first phase essentially checks if there is enough space in the system space_info, allocating a new system chunk if there isn't, while the second phase updates the device, extent and chunk trees. However, because the updates to the chunk tree happen in the second phase, if we have N tasks, each with its own transaction handle, allocating new chunks in parallel and if there is only enough space in the system space_info to allocate M chunks, where M < N, none of the tasks ends up allocating a new system chunk in the first phase and N - M tasks will get -ENOSPC when attempting to update the chunk tree in phase 2 if they need to COW any nodes/leafs from the chunk tree. Fix this by doing proper reservation in the chunk block reserve. The issue could be reproduced by running fstests generic/038 in a loop, which eventually triggered the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-20 16:01:54 +03:00
btrfs_trans_release_chunk_metadata(trans);
if (lock && READ_ONCE(cur_trans->state) == TRANS_STATE_BLOCKED) {
if (throttle)
return btrfs_commit_transaction(trans);
else
wake_up_process(info->transaction_kthread);
}
if (trans->type & __TRANS_FREEZABLE)
sb_end_intwrite(info->sb);
Btrfs: move the sb_end_intwrite until after the throttle logic Sage reported the following lockdep backtrace ===================================== [ BUG: bad unlock balance detected! ] 3.6.0-rc2-ceph-00171-gc7ed62d #1 Not tainted ------------------------------------- btrfs-cleaner/7607 is trying to release lock (sb_internal) at: [<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs] but there are no more locks to release! other info that might help us debug this: 1 lock held by btrfs-cleaner/7607: #0: (&fs_info->cleaner_mutex){+.+...}, at: [<ffffffffa003b405>] cleaner_kthread+0x95/0x120 [btrfs] stack backtrace: Pid: 7607, comm: btrfs-cleaner Not tainted 3.6.0-rc2-ceph-00171-gc7ed62d #1 Call Trace: [<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs] [<ffffffff810afa9e>] print_unlock_inbalance_bug+0xfe/0x110 [<ffffffff810b289e>] lock_release_non_nested+0x1ee/0x310 [<ffffffff81172f9b>] ? kmem_cache_free+0x7b/0x160 [<ffffffffa004106c>] ? put_transaction+0x8c/0x130 [btrfs] [<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs] [<ffffffff810b2a95>] lock_release+0xd5/0x220 [<ffffffff81173071>] ? kmem_cache_free+0x151/0x160 [<ffffffff8117d9ed>] __sb_end_write+0x7d/0x90 [<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs] [<ffffffff81079850>] ? __init_waitqueue_head+0x60/0x60 [<ffffffff81634c6b>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffffa0042758>] __btrfs_end_transaction+0x368/0x3c0 [btrfs] [<ffffffffa0042808>] btrfs_end_transaction_throttle+0x18/0x20 [btrfs] [<ffffffffa00318f0>] btrfs_drop_snapshot+0x410/0x600 [btrfs] [<ffffffff8132babd>] ? do_raw_spin_unlock+0x5d/0xb0 [<ffffffffa00430ef>] btrfs_clean_old_snapshots+0xaf/0x150 [btrfs] [<ffffffffa003b405>] ? cleaner_kthread+0x95/0x120 [btrfs] [<ffffffffa003b419>] cleaner_kthread+0xa9/0x120 [btrfs] [<ffffffffa003b370>] ? btrfs_destroy_delayed_refs.isra.102+0x220/0x220 [btrfs] [<ffffffff810791ee>] kthread+0xae/0xc0 [<ffffffff810b379d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8163e744>] kernel_thread_helper+0x4/0x10 [<ffffffff81635430>] ? retint_restore_args+0x13/0x13 [<ffffffff81079140>] ? flush_kthread_work+0x1a0/0x1a0 [<ffffffff8163e740>] ? gs_change+0x13/0x13 This is because the throttle stuff can commit the transaction, which expects to be the one stopping the intwrite stuff, but we've already done it in the __btrfs_end_transaction. Moving the sb_end_intewrite after this logic makes the lockdep go away. Thanks, Tested-by: Sage Weil <sage@inktank.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2012-09-05 18:08:30 +04:00
WARN_ON(cur_trans != info->running_transaction);
WARN_ON(atomic_read(&cur_trans->num_writers) < 1);
atomic_dec(&cur_trans->num_writers);
extwriter_counter_dec(cur_trans, trans->type);
cond_wake_up(&cur_trans->writer_wait);
btrfs_put_transaction(cur_trans);
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 00:12:44 +04:00
if (current->journal_info == trans)
current->journal_info = NULL;
if (throttle)
btrfs_run_delayed_iputs(info);
if (trans->aborted ||
test_bit(BTRFS_FS_STATE_ERROR, &info->fs_state)) {
wake_up_process(info->transaction_kthread);
err = -EIO;
}
kmem_cache_free(btrfs_trans_handle_cachep, trans);
return err;
}
int btrfs_end_transaction(struct btrfs_trans_handle *trans)
{
return __btrfs_end_transaction(trans, 0);
}
int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans)
{
return __btrfs_end_transaction(trans, 1);
btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dave@jikos.cz> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 14:12:22 +04:00
}
/*
* when btree blocks are allocated, they have some corresponding bits set for
* them in one of two extent_io trees. This is used to make sure all of
* those extents are sent to disk but does not wait on them
*/
int btrfs_write_marked_extents(struct btrfs_fs_info *fs_info,
struct extent_io_tree *dirty_pages, int mark)
{
int err = 0;
int werr = 0;
struct address_space *mapping = fs_info->btree_inode->i_mapping;
struct extent_state *cached_state = NULL;
u64 start = 0;
u64 end;
atomic_inc(&BTRFS_I(fs_info->btree_inode)->sync_writers);
while (!find_first_extent_bit(dirty_pages, start, &start, &end,
mark, &cached_state)) {
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
bool wait_writeback = false;
err = convert_extent_bit(dirty_pages, start, end,
EXTENT_NEED_WAIT,
mark, &cached_state);
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
/*
* convert_extent_bit can return -ENOMEM, which is most of the
* time a temporary error. So when it happens, ignore the error
* and wait for writeback of this range to finish - because we
* failed to set the bit EXTENT_NEED_WAIT for the range, a call
* to __btrfs_wait_marked_extents() would not know that
* writeback for this range started and therefore wouldn't
* wait for it to finish - we don't want to commit a
* superblock that points to btree nodes/leafs for which
* writeback hasn't finished yet (and without errors).
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
* We cleanup any entries left in the io tree when committing
* the transaction (through extent_io_tree_release()).
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
*/
if (err == -ENOMEM) {
err = 0;
wait_writeback = true;
}
if (!err)
err = filemap_fdatawrite_range(mapping, start, end);
if (err)
werr = err;
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
else if (wait_writeback)
werr = filemap_fdatawait_range(mapping, start, end);
free_extent_state(cached_state);
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
cached_state = NULL;
cond_resched();
start = end + 1;
}
atomic_dec(&BTRFS_I(fs_info->btree_inode)->sync_writers);
return werr;
}
/*
* when btree blocks are allocated, they have some corresponding bits set for
* them in one of two extent_io trees. This is used to make sure all of
* those extents are on disk for transaction or log commit. We wait
* on all the pages and clear them from the dirty pages state tree
*/
static int __btrfs_wait_marked_extents(struct btrfs_fs_info *fs_info,
struct extent_io_tree *dirty_pages)
{
int err = 0;
int werr = 0;
struct address_space *mapping = fs_info->btree_inode->i_mapping;
struct extent_state *cached_state = NULL;
u64 start = 0;
u64 end;
while (!find_first_extent_bit(dirty_pages, start, &start, &end,
EXTENT_NEED_WAIT, &cached_state)) {
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
/*
* Ignore -ENOMEM errors returned by clear_extent_bit().
* When committing the transaction, we'll remove any entries
* left in the io tree. For a log commit, we don't remove them
* after committing the log because the tree can be accessed
* concurrently - we do it only at transaction commit time when
* it's safe to do it (through extent_io_tree_release()).
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
*/
err = clear_extent_bit(dirty_pages, start, end,
EXTENT_NEED_WAIT, 0, 0, &cached_state);
Btrfs: deal with convert_extent_bit errors to avoid fs corruption When committing a transaction or a log, we look for btree extents that need to be durably persisted by searching for ranges in a io tree that have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear those bits and set the EXTENT_NEED_WAIT bit, with calls to the function convert_extent_bit, and then start writeback for the extents. That function however can return an error (at the moment only -ENOMEM is possible, specially when it does GFP_ATOMIC allocation requests through alloc_extent_state_atomic) - that means the ranges didn't got the EXTENT_NEED_WAIT bit set (or at least not for the whole range), which in turn means a call to btrfs_wait_marked_extents() won't find those ranges for which we started writeback, causing a transaction commit or a log commit to persist a new superblock without waiting for the writeback of extents in that range to finish first. Therefore if a crash happens after persisting the new superblock and before writeback finishes, we have a superblock pointing to roots that weren't fully persisted or roots that point to nodes or leafs that weren't fully persisted, causing all sorts of unexpected/bad behaviour as we endup reading garbage from disk or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on X wanted Y found Z" when reading btree nodes/leafs from disk). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-13 15:28:37 +04:00
if (err == -ENOMEM)
err = 0;
if (!err)
err = filemap_fdatawait_range(mapping, start, end);
if (err)
werr = err;
free_extent_state(cached_state);
cached_state = NULL;
cond_resched();
start = end + 1;
}
if (err)
werr = err;
return werr;
}
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 15:25:56 +04:00
int btrfs_wait_extents(struct btrfs_fs_info *fs_info,
struct extent_io_tree *dirty_pages)
{
bool errors = false;
int err;
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 15:25:56 +04:00
err = __btrfs_wait_marked_extents(fs_info, dirty_pages);
if (test_and_clear_bit(BTRFS_FS_BTREE_ERR, &fs_info->flags))
errors = true;
if (errors && !err)
err = -EIO;
return err;
}
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 15:25:56 +04:00
int btrfs_wait_tree_log_extents(struct btrfs_root *log_root, int mark)
{
struct btrfs_fs_info *fs_info = log_root->fs_info;
struct extent_io_tree *dirty_pages = &log_root->dirty_log_pages;
bool errors = false;
int err;
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 15:25:56 +04:00
ASSERT(log_root->root_key.objectid == BTRFS_TREE_LOG_OBJECTID);
err = __btrfs_wait_marked_extents(fs_info, dirty_pages);
if ((mark & EXTENT_DIRTY) &&
test_and_clear_bit(BTRFS_FS_LOG1_ERR, &fs_info->flags))
errors = true;
if ((mark & EXTENT_NEW) &&
test_and_clear_bit(BTRFS_FS_LOG2_ERR, &fs_info->flags))
errors = true;
if (errors && !err)
err = -EIO;
return err;
}
/*
* When btree blocks are allocated the corresponding extents are marked dirty.
* This function ensures such extents are persisted on disk for transaction or
* log commit.
*
* @trans: transaction whose dirty pages we'd like to write
*/
static int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans)
{
int ret;
int ret2;
struct extent_io_tree *dirty_pages = &trans->transaction->dirty_pages;
struct btrfs_fs_info *fs_info = trans->fs_info;
struct blk_plug plug;
blk_start_plug(&plug);
ret = btrfs_write_marked_extents(fs_info, dirty_pages, EXTENT_DIRTY);
blk_finish_plug(&plug);
ret2 = btrfs_wait_extents(fs_info, dirty_pages);
extent_io_tree_release(&trans->transaction->dirty_pages);
if (ret)
return ret;
else if (ret2)
return ret2;
else
return 0;
}
/*
* this is used to update the root pointer in the tree of tree roots.
*
* But, in the case of the extent allocation tree, updating the root
* pointer may allocate blocks which may change the root of the extent
* allocation tree.
*
* So, this loops and repeats and makes sure the cowonly root didn't
* change while the root pointer was being updated in the metadata.
*/
static int update_cowonly_root(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
int ret;
u64 old_root_bytenr;
u64 old_root_used;
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_root *tree_root = fs_info->tree_root;
old_root_used = btrfs_root_used(&root->root_item);
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
while (1) {
old_root_bytenr = btrfs_root_bytenr(&root->root_item);
if (old_root_bytenr == root->node->start &&
old_root_used == btrfs_root_used(&root->root_item))
break;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
btrfs_set_root_node(&root->root_item, root->node);
ret = btrfs_update_root(trans, tree_root,
&root->root_key,
&root->root_item);
if (ret)
return ret;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
old_root_used = btrfs_root_used(&root->root_item);
}
return 0;
}
/*
* update all the cowonly tree roots on disk
*
* The error handling in this function may not be obvious. Any of the
* failures will cause the file system to go offline. We still need
* to clean up the delayed refs.
*/
static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct list_head *dirty_bgs = &trans->transaction->dirty_bgs;
struct list_head *io_bgs = &trans->transaction->io_bgs;
struct list_head *next;
struct extent_buffer *eb;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
int ret;
eb = btrfs_lock_root_node(fs_info->tree_root);
ret = btrfs_cow_block(trans, fs_info->tree_root, eb, NULL,
0, &eb);
btrfs_tree_unlock(eb);
free_extent_buffer(eb);
if (ret)
return ret;
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret)
return ret;
ret = btrfs_run_dev_stats(trans);
if (ret)
return ret;
ret = btrfs_run_dev_replace(trans);
if (ret)
return ret;
ret = btrfs_run_qgroups(trans);
if (ret)
return ret;
ret = btrfs_setup_space_cache(trans);
if (ret)
return ret;
/* run_qgroups might have added some more refs */
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret)
return ret;
again:
while (!list_empty(&fs_info->dirty_cowonly_roots)) {
struct btrfs_root *root;
next = fs_info->dirty_cowonly_roots.next;
list_del_init(next);
root = list_entry(next, struct btrfs_root, dirty_list);
clear_bit(BTRFS_ROOT_DIRTY, &root->state);
if (root != fs_info->extent_root)
list_add_tail(&root->dirty_list,
&trans->transaction->switch_commits);
ret = update_cowonly_root(trans, root);
if (ret)
return ret;
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret)
return ret;
}
while (!list_empty(dirty_bgs) || !list_empty(io_bgs)) {
ret = btrfs_write_dirty_block_groups(trans);
if (ret)
return ret;
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret)
return ret;
}
if (!list_empty(&fs_info->dirty_cowonly_roots))
goto again;
list_add_tail(&fs_info->extent_root->dirty_list,
&trans->transaction->switch_commits);
/* Update dev-replace pointer once everything is committed */
fs_info->dev_replace.committed_cursor_left =
fs_info->dev_replace.cursor_left_last_write_of_item;
return 0;
}
/*
* dead roots are old snapshots that need to be deleted. This allocates
* a dirty root struct and adds it into the list of dead roots that need to
* be deleted
*/
void btrfs_add_dead_root(struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
spin_lock(&fs_info->trans_lock);
if (list_empty(&root->root_list))
list_add_tail(&root->root_list, &fs_info->dead_roots);
spin_unlock(&fs_info->trans_lock);
}
/*
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
* update all the cowonly tree roots on disk
*/
static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_root *gang[8];
int i;
int ret;
int err = 0;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_lock(&fs_info->fs_roots_radix_lock);
while (1) {
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
ret = radix_tree_gang_lookup_tag(&fs_info->fs_roots_radix,
(void **)gang, 0,
ARRAY_SIZE(gang),
BTRFS_ROOT_TRANS_TAG);
if (ret == 0)
break;
for (i = 0; i < ret; i++) {
struct btrfs_root *root = gang[i];
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
radix_tree_tag_clear(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_unlock(&fs_info->fs_roots_radix_lock);
btrfs_free_log(trans, root);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
btrfs_update_reloc_root(trans, root);
btrfs_save_ino_cache(root, trans);
/* see comments in should_cow_block() */
clear_bit(BTRFS_ROOT_FORCE_COW, &root->state);
smp_mb__after_atomic();
if (root->commit_root != root->node) {
list_add_tail(&root->dirty_list,
&trans->transaction->switch_commits);
btrfs_set_root_node(&root->root_item,
root->node);
}
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
err = btrfs_update_root(trans, fs_info->tree_root,
&root->root_key,
&root->root_item);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_lock(&fs_info->fs_roots_radix_lock);
if (err)
break;
btrfs_qgroup_free_meta_all_pertrans(root);
}
}
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_unlock(&fs_info->fs_roots_radix_lock);
return err;
}
/*
* defrag a given btree.
* Every leaf in the btree is read and defragged.
*/
int btrfs_defrag_root(struct btrfs_root *root)
{
struct btrfs_fs_info *info = root->fs_info;
struct btrfs_trans_handle *trans;
int ret;
if (test_and_set_bit(BTRFS_ROOT_DEFRAG_RUNNING, &root->state))
return 0;
while (1) {
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans))
return PTR_ERR(trans);
ret = btrfs_defrag_leaves(trans, root);
btrfs_end_transaction(trans);
btrfs_btree_balance_dirty(info);
cond_resched();
if (btrfs_fs_closing(info) || ret != -EAGAIN)
break;
if (btrfs_defrag_cancelled(info)) {
btrfs_debug(info, "defrag_root cancelled");
ret = -EAGAIN;
break;
}
}
clear_bit(BTRFS_ROOT_DEFRAG_RUNNING, &root->state);
return ret;
}
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
/*
* Do all special snapshot related qgroup dirty hack.
*
* Will do all needed qgroup inherit and dirty hack like switch commit
* roots inside one transaction and write all btree into disk, to make
* qgroup works.
*/
static int qgroup_account_snapshot(struct btrfs_trans_handle *trans,
struct btrfs_root *src,
struct btrfs_root *parent,
struct btrfs_qgroup_inherit *inherit,
u64 dst_objectid)
{
struct btrfs_fs_info *fs_info = src->fs_info;
int ret;
/*
* Save some performance in the case that qgroups are not
* enabled. If this check races with the ioctl, rescan will
* kick in anyway.
*/
if (!test_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags))
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
return 0;
/*
* Ensure dirty @src will be committed. Or, after coming
* commit_fs_roots() and switch_commit_roots(), any dirty but not
* recorded root will never be updated again, causing an outdated root
* item.
*/
record_root_in_trans(trans, src, 1);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
/*
* We are going to commit transaction, see btrfs_commit_transaction()
* comment for reason locking tree_log_mutex
*/
mutex_lock(&fs_info->tree_log_mutex);
ret = commit_fs_roots(trans);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
if (ret)
goto out;
ret = btrfs_qgroup_account_extents(trans);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
if (ret < 0)
goto out;
/* Now qgroup are all updated, we can inherit it to new qgroups */
ret = btrfs_qgroup_inherit(trans, src->root_key.objectid, dst_objectid,
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
inherit);
if (ret < 0)
goto out;
/*
* Now we do a simplified commit transaction, which will:
* 1) commit all subvolume and extent tree
* To ensure all subvolume and extent tree have a valid
* commit_root to accounting later insert_dir_item()
* 2) write all btree blocks onto disk
* This is to make sure later btree modification will be cowed
* Or commit_root can be populated and cause wrong qgroup numbers
* In this simplified commit, we don't really care about other trees
* like chunk and root tree, as they won't affect qgroup.
* And we don't write super to avoid half committed status.
*/
ret = commit_cowonly_roots(trans);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
if (ret)
goto out;
switch_commit_roots(trans->transaction);
ret = btrfs_write_and_wait_transaction(trans);
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
if (ret)
btrfs_handle_fs_error(fs_info, ret,
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
"Error while writing out transaction for qgroup");
out:
mutex_unlock(&fs_info->tree_log_mutex);
/*
* Force parent root to be updated, as we recorded it before so its
* last_trans == cur_transid.
* Or it won't be committed again onto disk after later
* insert_dir_item()
*/
if (!ret)
record_root_in_trans(trans, parent, 1);
return ret;
}
/*
* new snapshots need to be created at a very specific time in the
* transaction commit. This does the actual creation.
*
* Note:
* If the error which may affect the commitment of the current transaction
* happens, we should return the error number. If the error which just affect
* the creation of the pending snapshots, just return 0.
*/
static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
struct btrfs_pending_snapshot *pending)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_key key;
struct btrfs_root_item *new_root_item;
struct btrfs_root *tree_root = fs_info->tree_root;
struct btrfs_root *root = pending->root;
struct btrfs_root *parent_root;
struct btrfs_block_rsv *rsv;
struct inode *parent_inode;
struct btrfs_path *path;
struct btrfs_dir_item *dir_item;
struct dentry *dentry;
struct extent_buffer *tmp;
struct extent_buffer *old;
vfs: change inode times to use struct timespec64 struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-09 05:36:02 +03:00
struct timespec64 cur_time;
int ret = 0;
u64 to_reserve = 0;
u64 index = 0;
u64 objectid;
u64 root_flags;
uuid_le new_uuid;
ASSERT(pending->path);
path = pending->path;
ASSERT(pending->root_item);
new_root_item = pending->root_item;
pending->error = btrfs_find_free_objectid(tree_root, &objectid);
if (pending->error)
goto no_free_objectid;
/*
* Make qgroup to skip current new snapshot's qgroupid, as it is
* accounted by later btrfs_qgroup_inherit().
*/
btrfs_set_skip_qgroup(trans, objectid);
btrfs_reloc_pre_snapshot(pending, &to_reserve);
if (to_reserve > 0) {
pending->error = btrfs_block_rsv_add(root,
&pending->block_rsv,
to_reserve,
BTRFS_RESERVE_NO_FLUSH);
if (pending->error)
goto clear_skip_qgroup;
}
key.objectid = objectid;
key.offset = (u64)-1;
key.type = BTRFS_ROOT_ITEM_KEY;
rsv = trans->block_rsv;
trans->block_rsv = &pending->block_rsv;
trans->bytes_reserved = trans->block_rsv->reserved;
trace_btrfs_space_reservation(fs_info, "transaction",
trans->transid,
trans->bytes_reserved, 1);
dentry = pending->dentry;
parent_inode = pending->dir;
parent_root = BTRFS_I(parent_inode)->root;
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
record_root_in_trans(trans, parent_root, 0);
cur_time = current_time(parent_inode);
/*
* insert the directory item
*/
ret = btrfs_set_inode_index(BTRFS_I(parent_inode), &index);
BUG_ON(ret); /* -ENOMEM */
/* check if there is a file/dir which has the same name. */
dir_item = btrfs_lookup_dir_item(NULL, parent_root, path,
btrfs_ino(BTRFS_I(parent_inode)),
dentry->d_name.name,
dentry->d_name.len, 0);
if (dir_item != NULL && !IS_ERR(dir_item)) {
pending->error = -EEXIST;
goto dir_item_existed;
} else if (IS_ERR(dir_item)) {
ret = PTR_ERR(dir_item);
btrfs_abort_transaction(trans, ret);
goto fail;
}
btrfs_release_path(path);
/*
* pull in the delayed directory update
* and the delayed inode item
* otherwise we corrupt the FS during
* snapshot
*/
ret = btrfs_run_delayed_items(trans);
if (ret) { /* Transaction aborted */
btrfs_abort_transaction(trans, ret);
goto fail;
}
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
record_root_in_trans(trans, root, 0);
btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
btrfs_check_and_init_root_item(new_root_item);
root_flags = btrfs_root_flags(new_root_item);
if (pending->readonly)
root_flags |= BTRFS_ROOT_SUBVOL_RDONLY;
else
root_flags &= ~BTRFS_ROOT_SUBVOL_RDONLY;
btrfs_set_root_flags(new_root_item, root_flags);
btrfs_set_root_generation_v2(new_root_item,
trans->transid);
uuid_le_gen(&new_uuid);
memcpy(new_root_item->uuid, new_uuid.b, BTRFS_UUID_SIZE);
memcpy(new_root_item->parent_uuid, root->root_item.uuid,
BTRFS_UUID_SIZE);
if (!(root_flags & BTRFS_ROOT_SUBVOL_RDONLY)) {
memset(new_root_item->received_uuid, 0,
sizeof(new_root_item->received_uuid));
memset(&new_root_item->stime, 0, sizeof(new_root_item->stime));
memset(&new_root_item->rtime, 0, sizeof(new_root_item->rtime));
btrfs_set_root_stransid(new_root_item, 0);
btrfs_set_root_rtransid(new_root_item, 0);
}
btrfs_set_stack_timespec_sec(&new_root_item->otime, cur_time.tv_sec);
btrfs_set_stack_timespec_nsec(&new_root_item->otime, cur_time.tv_nsec);
btrfs_set_root_otransid(new_root_item, trans->transid);
old = btrfs_lock_root_node(root);
ret = btrfs_cow_block(trans, root, old, NULL, 0, &old);
if (ret) {
btrfs_tree_unlock(old);
free_extent_buffer(old);
btrfs_abort_transaction(trans, ret);
goto fail;
}
btrfs_set_lock_blocking_write(old);
ret = btrfs_copy_root(trans, root, old, &tmp, objectid);
/* clean up in any case */
btrfs_tree_unlock(old);
free_extent_buffer(old);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
/* see comments in should_cow_block() */
set_bit(BTRFS_ROOT_FORCE_COW, &root->state);
smp_wmb();
btrfs_set_root_node(new_root_item, tmp);
/* record when the snapshot was created in key.offset */
key.offset = trans->transid;
ret = btrfs_insert_root(trans, tree_root, &key, new_root_item);
btrfs_tree_unlock(tmp);
free_extent_buffer(tmp);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
/*
* insert root back/forward references
*/
ret = btrfs_add_root_ref(trans, objectid,
parent_root->root_key.objectid,
btrfs_ino(BTRFS_I(parent_inode)), index,
dentry->d_name.name, dentry->d_name.len);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
key.offset = (u64)-1;
pending->snap = btrfs_read_fs_root_no_name(fs_info, &key);
if (IS_ERR(pending->snap)) {
ret = PTR_ERR(pending->snap);
btrfs_abort_transaction(trans, ret);
goto fail;
}
ret = btrfs_reloc_post_snapshot(trans, pending);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
Btrfs: fix full backref problem when inserting shared block reference If we create several snapshots at the same time, the following BUG_ON() will be triggered. kernel BUG at fs/btrfs/extent-tree.c:6047! Steps to reproduce: # mkfs.btrfs <partition> # mount <partition> <mnt> # cd <mnt> # for ((i=0;i<2400;i++)); do touch long_name_to_make_tree_more_deep$i; done # for ((i=0; i<4; i++)) > do > mkdir $i > for ((j=0; j<200; j++)) > do > btrfs sub snap . $i/$j > done & > done The reason is: Before transaction commit, some operations changed the fs tree and new tree blocks were allocated because of COW. We used the implicit non-shared back reference for those newly allocated tree blocks because they were not shared by two or more trees. And then we created the first snapshot for the fs tree, according to the back reference rules, we also used implicit back refs for the child tree blocks of the root node of the fs tree, now those child nodes/leaves were shared by two trees. Then We didn't deal with the delayed references, and continued to change the fs tree(created the second snapshot and inserted the dir item of the new snapshot into the fs tree). According to the rules of the back reference, we added full back refs for those tree blocks whose parents have be shared by two trees. Now some newly allocated tree blocks had two types of the references. As we know, the delayed reference system handles these delayed references from back to front, and the full delayed reference is inserted after the implicit ones. So when we dealt with the back references of those newly allocated tree blocks, the full references was dealt with at first. And if the first reference is a shared back reference and the tree block that the reference points to is newly allocated, It would be considered as a tree block which is shared by two or more trees when it is allocated and should be a full back reference not a implicit one, the flag of its reference also should be set to FULL_BACKREF. But in fact, it was a non-shared tree block with a implicit reference at beginning, so it was not compulsory to set the flags to FULL_BACKREF. So BUG_ON was triggered. We have several methods to fix this bug: 1. deal with delayed references after the snapshot is created and before we change the source tree of the snapshot. This is the easiest and safest way. 2. modify the sort method of the delayed reference tree, make the full delayed references be inserted before the implicit ones. It is also very easy, but I don't know if it will introduce some problems or not. 3. modify select_delayed_ref() and make it select the implicit delayed reference at first. This way is not so good because it may wastes CPU time if we have lots of delayed references. 4. set the flags to FULL_BACKREF, this method is a little complex comparing with the 1st way. I chose the 1st way to fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
2012-09-06 14:00:57 +04:00
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
btrfs: qgroup: Fix qgroup accounting when creating snapshot Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-11 22:53:52 +03:00
/*
* Do special qgroup accounting for snapshot, as we do some qgroup
* snapshot hack to do fast snapshot.
* To co-operate with that hack, we do hack again.
* Or snapshot will be greatly slowed down by a subtree qgroup rescan
*/
ret = qgroup_account_snapshot(trans, root, parent_root,
pending->inherit, objectid);
if (ret < 0)
goto fail;
ret = btrfs_insert_dir_item(trans, dentry->d_name.name,
dentry->d_name.len, BTRFS_I(parent_inode),
&key, BTRFS_FT_DIR, index);
/* We have check then name at the beginning, so it is impossible. */
BUG_ON(ret == -EEXIST || ret == -EOVERFLOW);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
btrfs_i_size_write(BTRFS_I(parent_inode), parent_inode->i_size +
dentry->d_name.len * 2);
parent_inode->i_mtime = parent_inode->i_ctime =
current_time(parent_inode);
ret = btrfs_update_inode_fallback(trans, parent_root, parent_inode);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
ret = btrfs_uuid_tree_add(trans, new_uuid.b, BTRFS_UUID_KEY_SUBVOL,
objectid);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
if (!btrfs_is_empty_uuid(new_root_item->received_uuid)) {
ret = btrfs_uuid_tree_add(trans, new_root_item->received_uuid,
BTRFS_UUID_KEY_RECEIVED_SUBVOL,
objectid);
if (ret && ret != -EEXIST) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
}
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto fail;
}
fail:
pending->error = ret;
dir_item_existed:
trans->block_rsv = rsv;
trans->bytes_reserved = 0;
clear_skip_qgroup:
btrfs_clear_skip_qgroup(trans);
no_free_objectid:
kfree(new_root_item);
pending->root_item = NULL;
btrfs_free_path(path);
pending->path = NULL;
return ret;
}
/*
* create all the snapshots we've scheduled for creation
*/
static noinline int create_pending_snapshots(struct btrfs_trans_handle *trans)
{
struct btrfs_pending_snapshot *pending, *next;
struct list_head *head = &trans->transaction->pending_snapshots;
int ret = 0;
list_for_each_entry_safe(pending, next, head, list) {
list_del(&pending->list);
ret = create_pending_snapshot(trans, pending);
if (ret)
break;
}
return ret;
}
static void update_super_roots(struct btrfs_fs_info *fs_info)
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
{
struct btrfs_root_item *root_item;
struct btrfs_super_block *super;
super = fs_info->super_copy;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
root_item = &fs_info->chunk_root->root_item;
super->chunk_root = root_item->bytenr;
super->chunk_root_generation = root_item->generation;
super->chunk_root_level = root_item->level;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
root_item = &fs_info->tree_root->root_item;
super->root = root_item->bytenr;
super->generation = root_item->generation;
super->root_level = root_item->level;
if (btrfs_test_opt(fs_info, SPACE_CACHE))
super->cache_generation = root_item->generation;
if (test_bit(BTRFS_FS_UPDATE_UUID_TREE_GEN, &fs_info->flags))
super->uuid_tree_generation = root_item->generation;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
}
int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
{
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
struct btrfs_transaction *trans;
int ret = 0;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_lock(&info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
trans = info->running_transaction;
if (trans)
ret = (trans->state >= TRANS_STATE_COMMIT_START);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_unlock(&info->trans_lock);
return ret;
}
int btrfs_transaction_blocked(struct btrfs_fs_info *info)
{
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
struct btrfs_transaction *trans;
int ret = 0;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_lock(&info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
trans = info->running_transaction;
if (trans)
ret = is_transaction_blocked(trans);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_unlock(&info->trans_lock);
return ret;
}
/*
* wait for the current transaction commit to start and block subsequent
* transaction joins
*/
static void wait_current_trans_commit_start(struct btrfs_fs_info *fs_info,
struct btrfs_transaction *trans)
{
wait_event(fs_info->transaction_blocked_wait,
trans->state >= TRANS_STATE_COMMIT_START || trans->aborted);
}
/*
* wait for the current transaction to start and then become unblocked.
* caller holds ref.
*/
static void wait_current_trans_commit_start_and_unblock(
struct btrfs_fs_info *fs_info,
struct btrfs_transaction *trans)
{
wait_event(fs_info->transaction_wait,
trans->state >= TRANS_STATE_UNBLOCKED || trans->aborted);
}
/*
* commit transactions asynchronously. once btrfs_commit_transaction_async
* returns, any subsequent transaction will not be allowed to join.
*/
struct btrfs_async_commit {
struct btrfs_trans_handle *newtrans;
struct work_struct work;
};
static void do_async_commit(struct work_struct *work)
{
struct btrfs_async_commit *ac =
container_of(work, struct btrfs_async_commit, work);
/*
* We've got freeze protection passed with the transaction.
* Tell lockdep about it.
*/
Btrfs: fix lockdep error in async commit Lockdep complains about btrfs's async commit: [ 2372.462171] [ BUG: bad unlock balance detected! ] [ 2372.462191] 3.12.0+ #32 Tainted: G W [ 2372.462209] ------------------------------------- [ 2372.462228] ceph-osd/14048 is trying to release lock (sb_internal) at: [ 2372.462275] [<ffffffffa022cb10>] btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462305] but there are no more locks to release! [ 2372.462324] [ 2372.462324] other info that might help us debug this: [ 2372.462349] no locks held by ceph-osd/14048. [ 2372.462367] [ 2372.462367] stack backtrace: [ 2372.462386] CPU: 2 PID: 14048 Comm: ceph-osd Tainted: G W 3.12.0+ #32 [ 2372.462414] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 2372.462455] ffffffffa022cb10 ffff88007490fd28 ffffffff816f094a ffff8800378aa320 [ 2372.462491] ffff88007490fd50 ffffffff810adf4c ffff8800378aa320 ffff88009af97650 [ 2372.462526] ffffffffa022cb10 ffff88007490fd88 ffffffff810b01ee ffff8800898c0000 [ 2372.462562] Call Trace: [ 2372.462584] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462619] [<ffffffff816f094a>] dump_stack+0x45/0x56 [ 2372.462642] [<ffffffff810adf4c>] print_unlock_imbalance_bug+0xec/0x100 [ 2372.462677] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462710] [<ffffffff810b01ee>] lock_release+0x18e/0x210 [ 2372.462742] [<ffffffffa022cb36>] btrfs_commit_transaction_async+0x1d6/0x2a0 [btrfs] [ 2372.462783] [<ffffffffa025a7ce>] btrfs_ioctl_start_sync+0x3e/0xc0 [btrfs] [ 2372.462822] [<ffffffffa025f1d3>] btrfs_ioctl+0x4c3/0x1f70 [btrfs] [ 2372.462849] [<ffffffff812c0321>] ? avc_has_perm+0x121/0x1b0 [ 2372.462873] [<ffffffff812c0224>] ? avc_has_perm+0x24/0x1b0 [ 2372.462897] [<ffffffff8107ecc8>] ? sched_clock_cpu+0xa8/0x100 [ 2372.462922] [<ffffffff8117b145>] do_vfs_ioctl+0x2e5/0x4e0 [ 2372.462946] [<ffffffff812c19e6>] ? file_has_perm+0x86/0xa0 [ 2372.462969] [<ffffffff8117b3c1>] SyS_ioctl+0x81/0xa0 [ 2372.462991] [<ffffffff817045a4>] tracesys+0xdd/0xe2 ==================================================== It's because that we don't do the right thing when checking if it's ok to tell lockdep that we're trying to release the rwsem. If the trans handle's type is TRANS_ATTACH, we won't acquire the freeze rwsem, but as TRANS_ATTACH fits the check (trans < TRANS_JOIN_NOLOCK), we'll release the freeze rwsem, which makes lockdep complains a lot. Reported-by: Ma Jianpeng <majianpeng@gmail.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-06 12:57:55 +04:00
if (ac->newtrans->type & __TRANS_FREEZABLE)
__sb_writers_acquired(ac->newtrans->fs_info->sb, SB_FREEZE_FS);
current->journal_info = ac->newtrans;
btrfs_commit_transaction(ac->newtrans);
kfree(ac);
}
int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans,
int wait_for_unblock)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_async_commit *ac;
struct btrfs_transaction *cur_trans;
ac = kmalloc(sizeof(*ac), GFP_NOFS);
if (!ac)
return -ENOMEM;
INIT_WORK(&ac->work, do_async_commit);
ac->newtrans = btrfs_join_transaction(trans->root);
if (IS_ERR(ac->newtrans)) {
int err = PTR_ERR(ac->newtrans);
kfree(ac);
return err;
}
/* take transaction reference */
cur_trans = trans->transaction;
refcount_inc(&cur_trans->use_count);
btrfs_end_transaction(trans);
/*
* Tell lockdep we've released the freeze rwsem, since the
* async commit thread will be the one to unlock it.
*/
Btrfs: fix lockdep error in async commit Lockdep complains about btrfs's async commit: [ 2372.462171] [ BUG: bad unlock balance detected! ] [ 2372.462191] 3.12.0+ #32 Tainted: G W [ 2372.462209] ------------------------------------- [ 2372.462228] ceph-osd/14048 is trying to release lock (sb_internal) at: [ 2372.462275] [<ffffffffa022cb10>] btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462305] but there are no more locks to release! [ 2372.462324] [ 2372.462324] other info that might help us debug this: [ 2372.462349] no locks held by ceph-osd/14048. [ 2372.462367] [ 2372.462367] stack backtrace: [ 2372.462386] CPU: 2 PID: 14048 Comm: ceph-osd Tainted: G W 3.12.0+ #32 [ 2372.462414] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 2372.462455] ffffffffa022cb10 ffff88007490fd28 ffffffff816f094a ffff8800378aa320 [ 2372.462491] ffff88007490fd50 ffffffff810adf4c ffff8800378aa320 ffff88009af97650 [ 2372.462526] ffffffffa022cb10 ffff88007490fd88 ffffffff810b01ee ffff8800898c0000 [ 2372.462562] Call Trace: [ 2372.462584] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462619] [<ffffffff816f094a>] dump_stack+0x45/0x56 [ 2372.462642] [<ffffffff810adf4c>] print_unlock_imbalance_bug+0xec/0x100 [ 2372.462677] [<ffffffffa022cb10>] ? btrfs_commit_transaction_async+0x1b0/0x2a0 [btrfs] [ 2372.462710] [<ffffffff810b01ee>] lock_release+0x18e/0x210 [ 2372.462742] [<ffffffffa022cb36>] btrfs_commit_transaction_async+0x1d6/0x2a0 [btrfs] [ 2372.462783] [<ffffffffa025a7ce>] btrfs_ioctl_start_sync+0x3e/0xc0 [btrfs] [ 2372.462822] [<ffffffffa025f1d3>] btrfs_ioctl+0x4c3/0x1f70 [btrfs] [ 2372.462849] [<ffffffff812c0321>] ? avc_has_perm+0x121/0x1b0 [ 2372.462873] [<ffffffff812c0224>] ? avc_has_perm+0x24/0x1b0 [ 2372.462897] [<ffffffff8107ecc8>] ? sched_clock_cpu+0xa8/0x100 [ 2372.462922] [<ffffffff8117b145>] do_vfs_ioctl+0x2e5/0x4e0 [ 2372.462946] [<ffffffff812c19e6>] ? file_has_perm+0x86/0xa0 [ 2372.462969] [<ffffffff8117b3c1>] SyS_ioctl+0x81/0xa0 [ 2372.462991] [<ffffffff817045a4>] tracesys+0xdd/0xe2 ==================================================== It's because that we don't do the right thing when checking if it's ok to tell lockdep that we're trying to release the rwsem. If the trans handle's type is TRANS_ATTACH, we won't acquire the freeze rwsem, but as TRANS_ATTACH fits the check (trans < TRANS_JOIN_NOLOCK), we'll release the freeze rwsem, which makes lockdep complains a lot. Reported-by: Ma Jianpeng <majianpeng@gmail.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-11-06 12:57:55 +04:00
if (ac->newtrans->type & __TRANS_FREEZABLE)
__sb_writers_release(fs_info->sb, SB_FREEZE_FS);
schedule_work(&ac->work);
/* wait for transaction to start and unblock */
if (wait_for_unblock)
wait_current_trans_commit_start_and_unblock(fs_info, cur_trans);
else
wait_current_trans_commit_start(fs_info, cur_trans);
if (current->journal_info == trans)
current->journal_info = NULL;
btrfs_put_transaction(cur_trans);
return 0;
}
static void cleanup_transaction(struct btrfs_trans_handle *trans, int err)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_transaction *cur_trans = trans->transaction;
WARN_ON(refcount_read(&trans->use_count) > 1);
btrfs_abort_transaction(trans, err);
spin_lock(&fs_info->trans_lock);
/*
* If the transaction is removed from the list, it means this
* transaction has been committed successfully, so it is impossible
* to call the cleanup function.
*/
BUG_ON(list_empty(&cur_trans->list));
list_del_init(&cur_trans->list);
if (cur_trans == fs_info->running_transaction) {
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
cur_trans->state = TRANS_STATE_COMMIT_DOING;
spin_unlock(&fs_info->trans_lock);
wait_event(cur_trans->writer_wait,
atomic_read(&cur_trans->num_writers) == 1);
spin_lock(&fs_info->trans_lock);
}
spin_unlock(&fs_info->trans_lock);
btrfs_cleanup_one_transaction(trans->transaction, fs_info);
spin_lock(&fs_info->trans_lock);
if (cur_trans == fs_info->running_transaction)
fs_info->running_transaction = NULL;
spin_unlock(&fs_info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
if (trans->type & __TRANS_FREEZABLE)
sb_end_intwrite(fs_info->sb);
btrfs_put_transaction(cur_trans);
btrfs_put_transaction(cur_trans);
trace_btrfs_transaction_commit(trans->root);
if (current->journal_info == trans)
current->journal_info = NULL;
btrfs_scrub_cancel(fs_info);
kmem_cache_free(btrfs_trans_handle_cachep, trans);
}
btrfs: clean up pending block groups when transaction commit aborts The fstests generic/475 stresses transaction aborts and can reveal space accounting or use-after-free bugs regarding block goups. In this case the pending block groups that remain linked to the structures after transaction commit aborts in the middle. The corrupted slabs lead to failures in following tests, eg. generic/476 [ 8172.752887] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 8172.755799] #PF error: [normal kernel read fault] [ 8172.757571] PGD 661ae067 P4D 661ae067 PUD 3db8e067 PMD 0 [ 8172.759000] Oops: 0000 [#1] PREEMPT SMP [ 8172.760209] CPU: 0 PID: 39 Comm: kswapd0 Tainted: G W 5.0.0-rc2-default #408 [ 8172.762495] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8172.765772] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 8172.770453] RSP: 0018:ffff967f00663b18 EFLAGS: 00010287 [ 8172.771184] RAX: 0000000000000000 RBX: ffff967f00663c20 RCX: 0000000000000000 [ 8172.772850] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c0620ab20e0 [ 8172.774629] RBP: ffff967f00663dd8 R08: 0000000000000000 R09: 0000000000000000 [ 8172.776094] R10: ffff8c0620ab22f8 R11: ffff8c063f772688 R12: ffff967f00663b78 [ 8172.777533] R13: ffff8c063f625600 R14: ffff8c063f625608 R15: dead000000000200 [ 8172.778886] FS: 0000000000000000(0000) GS:ffff8c063d400000(0000) knlGS:0000000000000000 [ 8172.780545] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8172.781787] CR2: 0000000000000058 CR3: 000000004e962000 CR4: 00000000000006f0 [ 8172.783547] Call Trace: [ 8172.784112] shrink_inactive_list+0x194/0x410 [ 8172.784747] shrink_node_memcg.constprop.85+0x3a5/0x6a0 [ 8172.785472] shrink_node+0x62/0x1e0 [ 8172.786011] balance_pgdat+0x216/0x460 [ 8172.786577] kswapd+0xe3/0x4a0 [ 8172.787085] ? finish_wait+0x80/0x80 [ 8172.787795] ? balance_pgdat+0x460/0x460 [ 8172.788799] kthread+0x116/0x130 [ 8172.789640] ? kthread_create_on_node+0x60/0x60 [ 8172.790323] ret_from_fork+0x24/0x30 [ 8172.794253] CR2: 0000000000000058 or accounting errors at umount time: [ 8159.537251] WARNING: CPU: 2 PID: 19031 at fs/btrfs/extent-tree.c:5987 btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.543325] CPU: 2 PID: 19031 Comm: umount Tainted: G W 5.0.0-rc2-default #408 [ 8159.545472] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8159.548155] RIP: 0010:btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.554030] RSP: 0018:ffff967f079cbde8 EFLAGS: 00010206 [ 8159.555144] RAX: 0000000001000000 RBX: ffff8c06366cf800 RCX: 0000000000000000 [ 8159.556730] RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff8c06255ad800 [ 8159.558279] RBP: ffff8c0637ac0000 R08: 0000000000000001 R09: 0000000000000000 [ 8159.559797] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8c0637ac0108 [ 8159.561296] R13: ffff8c0637ac0158 R14: 0000000000000000 R15: dead000000000100 [ 8159.562852] FS: 00007f7f693b9fc0(0000) GS:ffff8c063d800000(0000) knlGS:0000000000000000 [ 8159.564839] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8159.566160] CR2: 00007f7f68fab7b0 CR3: 000000000aec7000 CR4: 00000000000006e0 [ 8159.567898] Call Trace: [ 8159.568597] close_ctree+0x17f/0x350 [btrfs] [ 8159.569628] generic_shutdown_super+0x64/0x100 [ 8159.570808] kill_anon_super+0x14/0x30 [ 8159.571857] btrfs_kill_super+0x12/0xa0 [btrfs] [ 8159.573063] deactivate_locked_super+0x29/0x60 [ 8159.574234] cleanup_mnt+0x3b/0x70 [ 8159.575176] task_work_run+0x98/0xc0 [ 8159.576177] exit_to_usermode_loop+0x83/0x90 [ 8159.577315] do_syscall_64+0x15b/0x180 [ 8159.578339] entry_SYSCALL_64_after_hwframe+0x49/0xbe This fix is based on 2 Josef's patches that used sideefects of btrfs_create_pending_block_groups, this fix introduces the helper that does what we need. CC: stable@vger.kernel.org # 4.4+ CC: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 19:09:16 +03:00
/*
* Release reserved delayed ref space of all pending block groups of the
* transaction and remove them from the list
*/
static void btrfs_cleanup_pending_block_groups(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_block_group_cache *block_group, *tmp;
list_for_each_entry_safe(block_group, tmp, &trans->new_bgs, bg_list) {
btrfs_delayed_refs_rsv_release(fs_info, 1);
list_del_init(&block_group->bg_list);
}
}
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
static inline int btrfs_start_delalloc_flush(struct btrfs_trans_handle *trans)
{
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
struct btrfs_fs_info *fs_info = trans->fs_info;
/*
* We use writeback_inodes_sb here because if we used
* btrfs_start_delalloc_roots we would deadlock with fs freeze.
* Currently are holding the fs freeze lock, if we do an async flush
* we'll do btrfs_join_transaction() and deadlock because we need to
* wait for the fs freeze lock. Using the direct flushing we benefit
* from already being in a transaction and our join_transaction doesn't
* have to re-take the fs freeze lock.
*/
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
if (btrfs_test_opt(fs_info, FLUSHONCOMMIT)) {
writeback_inodes_sb(fs_info->sb, WB_REASON_SYNC);
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
} else {
struct btrfs_pending_snapshot *pending;
struct list_head *head = &trans->transaction->pending_snapshots;
/*
* Flush dellaloc for any root that is going to be snapshotted.
* This is done to avoid a corrupted version of files, in the
* snapshots, that had both buffered and direct IO writes (even
* if they were done sequentially) due to an unordered update of
* the inode's size on disk.
*/
list_for_each_entry(pending, head, list) {
int ret;
ret = btrfs_start_delalloc_snapshot(pending->root);
if (ret)
return ret;
}
}
return 0;
}
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
static inline void btrfs_wait_delalloc_flush(struct btrfs_trans_handle *trans)
{
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
struct btrfs_fs_info *fs_info = trans->fs_info;
if (btrfs_test_opt(fs_info, FLUSHONCOMMIT)) {
btrfs_wait_ordered_roots(fs_info, U64_MAX, 0, (u64)-1);
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
} else {
struct btrfs_pending_snapshot *pending;
struct list_head *head = &trans->transaction->pending_snapshots;
/*
* Wait for any dellaloc that we started previously for the roots
* that are going to be snapshotted. This is to avoid a corrupted
* version of files in the snapshots that had both buffered and
* direct IO writes (even if they were done sequentially).
*/
list_for_each_entry(pending, head, list)
btrfs_wait_ordered_extents(pending->root,
U64_MAX, 0, U64_MAX);
}
}
int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_transaction *cur_trans = trans->transaction;
struct btrfs_transaction *prev_trans = NULL;
int ret;
/* Stop the commit early if ->aborted is set */
if (unlikely(READ_ONCE(cur_trans->aborted))) {
ret = cur_trans->aborted;
btrfs_end_transaction(trans);
return ret;
}
btrfs_trans_release_metadata(trans);
trans->block_rsv = NULL;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
/* make a pass through all the delayed refs we have so far
* any runnings procs may add more while we are here
*/
ret = btrfs_run_delayed_refs(trans, 0);
if (ret) {
btrfs_end_transaction(trans);
return ret;
}
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
cur_trans = trans->transaction;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
/*
* set the flushing flag so procs in this transaction have to
* start sending their work down.
*/
cur_trans->delayed_refs.flushing = 1;
smp_wmb();
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
btrfs_create_pending_block_groups(trans);
ret = btrfs_run_delayed_refs(trans, 0);
if (ret) {
btrfs_end_transaction(trans);
return ret;
}
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
if (!test_bit(BTRFS_TRANS_DIRTY_BG_RUN, &cur_trans->flags)) {
int run_it = 0;
/* this mutex is also taken before trying to set
* block groups readonly. We need to make sure
* that nobody has set a block group readonly
* after a extents from that block group have been
* allocated for cache files. btrfs_set_block_group_ro
* will wait for the transaction to commit if it
* finds BTRFS_TRANS_DIRTY_BG_RUN set.
*
* The BTRFS_TRANS_DIRTY_BG_RUN flag is also used to make sure
* only one process starts all the block group IO. It wouldn't
* hurt to have more than one go through, but there's no
* real advantage to it either.
*/
mutex_lock(&fs_info->ro_block_group_mutex);
if (!test_and_set_bit(BTRFS_TRANS_DIRTY_BG_RUN,
&cur_trans->flags))
run_it = 1;
mutex_unlock(&fs_info->ro_block_group_mutex);
if (run_it) {
ret = btrfs_start_dirty_block_groups(trans);
if (ret) {
btrfs_end_transaction(trans);
return ret;
}
}
}
spin_lock(&fs_info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
if (cur_trans->state >= TRANS_STATE_COMMIT_START) {
spin_unlock(&fs_info->trans_lock);
refcount_inc(&cur_trans->use_count);
ret = btrfs_end_transaction(trans);
wait_for_commit(cur_trans);
if (unlikely(cur_trans->aborted))
ret = cur_trans->aborted;
btrfs_put_transaction(cur_trans);
return ret;
}
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
cur_trans->state = TRANS_STATE_COMMIT_START;
wake_up(&fs_info->transaction_blocked_wait);
if (cur_trans->list.prev != &fs_info->trans_list) {
prev_trans = list_entry(cur_trans->list.prev,
struct btrfs_transaction, list);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
if (prev_trans->state != TRANS_STATE_COMPLETED) {
refcount_inc(&prev_trans->use_count);
spin_unlock(&fs_info->trans_lock);
wait_for_commit(prev_trans);
Btrfs: check if previous transaction aborted to avoid fs corruption While we are committing a transaction, it's possible the previous one is still finishing its commit and therefore we wait for it to finish first. However we were not checking if that previous transaction ended up getting aborted after we waited for it to commit, so we ended up committing the current transaction which can lead to fs corruption because the new superblock can point to trees that have had one or more nodes/leafs that were never durably persisted. The following sequence diagram exemplifies how this is possible: CPU 0 CPU 1 transaction N starts (...) btrfs_commit_transaction(N) cur_trans->state = TRANS_STATE_COMMIT_START; (...) cur_trans->state = TRANS_STATE_COMMIT_DOING; (...) cur_trans->state = TRANS_STATE_UNBLOCKED; root->fs_info->running_transaction = NULL; btrfs_start_transaction() --> starts transaction N + 1 btrfs_write_and_wait_transaction(trans, root); --> starts writing all new or COWed ebs created at transaction N creates some new ebs, COWs some existing ebs but doesn't COW or deletes eb X btrfs_commit_transaction(N + 1) (...) cur_trans->state = TRANS_STATE_COMMIT_START; (...) wait_for_commit(root, prev_trans); --> prev_trans == transaction N btrfs_write_and_wait_transaction() continues writing ebs --> fails writing eb X, we abort transaction N and set bit BTRFS_FS_STATE_ERROR on fs_info->fs_state, so no new transactions can start after setting that bit cleanup_transaction() btrfs_cleanup_one_transaction() wakes up task at CPU 1 continues, doesn't abort because cur_trans->aborted (transaction N + 1) is zero, and no checks for bit BTRFS_FS_STATE_ERROR in fs_info->fs_state are made btrfs_write_and_wait_transaction(trans, root); --> succeeds, no errors during writeback write_ctree_super(trans, root, 0); --> succeeds --> we have now a superblock that points us to some root that uses eb X, which was never written to disk In this scenario future attempts to read eb X from disk results in an error message like "parent transid verify failed on X wanted Y found Z". So fix this by aborting the current transaction if after waiting for the previous transaction we verify that it was aborted. Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-08-12 13:54:35 +03:00
ret = prev_trans->aborted;
btrfs_put_transaction(prev_trans);
Btrfs: check if previous transaction aborted to avoid fs corruption While we are committing a transaction, it's possible the previous one is still finishing its commit and therefore we wait for it to finish first. However we were not checking if that previous transaction ended up getting aborted after we waited for it to commit, so we ended up committing the current transaction which can lead to fs corruption because the new superblock can point to trees that have had one or more nodes/leafs that were never durably persisted. The following sequence diagram exemplifies how this is possible: CPU 0 CPU 1 transaction N starts (...) btrfs_commit_transaction(N) cur_trans->state = TRANS_STATE_COMMIT_START; (...) cur_trans->state = TRANS_STATE_COMMIT_DOING; (...) cur_trans->state = TRANS_STATE_UNBLOCKED; root->fs_info->running_transaction = NULL; btrfs_start_transaction() --> starts transaction N + 1 btrfs_write_and_wait_transaction(trans, root); --> starts writing all new or COWed ebs created at transaction N creates some new ebs, COWs some existing ebs but doesn't COW or deletes eb X btrfs_commit_transaction(N + 1) (...) cur_trans->state = TRANS_STATE_COMMIT_START; (...) wait_for_commit(root, prev_trans); --> prev_trans == transaction N btrfs_write_and_wait_transaction() continues writing ebs --> fails writing eb X, we abort transaction N and set bit BTRFS_FS_STATE_ERROR on fs_info->fs_state, so no new transactions can start after setting that bit cleanup_transaction() btrfs_cleanup_one_transaction() wakes up task at CPU 1 continues, doesn't abort because cur_trans->aborted (transaction N + 1) is zero, and no checks for bit BTRFS_FS_STATE_ERROR in fs_info->fs_state are made btrfs_write_and_wait_transaction(trans, root); --> succeeds, no errors during writeback write_ctree_super(trans, root, 0); --> succeeds --> we have now a superblock that points us to some root that uses eb X, which was never written to disk In this scenario future attempts to read eb X from disk results in an error message like "parent transid verify failed on X wanted Y found Z". So fix this by aborting the current transaction if after waiting for the previous transaction we verify that it was aborted. Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-08-12 13:54:35 +03:00
if (ret)
goto cleanup_transaction;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
} else {
spin_unlock(&fs_info->trans_lock);
}
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
} else {
spin_unlock(&fs_info->trans_lock);
Btrfs: fix race leading to fs corruption after transaction abort When one transaction is finishing its commit, it is possible for another transaction to start and enter its initial commit phase as well. If the first ends up getting aborted, we have a small time window where the second transaction commit does not notice that the previous transaction aborted and ends up committing, writing a superblock that points to btrees that reference extent buffers (nodes and leafs) that were not persisted to disk. The consequence is that after mounting the filesystem again, we will be unable to load some btree nodes/leafs, either because the content on disk is either garbage (or just zeroes) or corresponds to the old content of a previouly COWed or deleted node/leaf, resulting in the well known error messages "parent transid verify failed on ...". The following sequence diagram illustrates how this can happen. CPU 1 CPU 2 <at transaction N> btrfs_commit_transaction() (...) --> sets transaction state to TRANS_STATE_UNBLOCKED --> sets fs_info->running_transaction to NULL (...) btrfs_start_transaction() start_transaction() wait_current_trans() --> returns immediately because fs_info->running_transaction is NULL join_transaction() --> creates transaction N + 1 --> sets fs_info->running_transaction to transaction N + 1 --> adds transaction N + 1 to the fs_info->trans_list list --> returns transaction handle pointing to the new transaction N + 1 (...) btrfs_sync_file() btrfs_start_transaction() --> returns handle to transaction N + 1 (...) btrfs_write_and_wait_transaction() --> writeback of some extent buffer fails, returns an error btrfs_handle_fs_error() --> sets BTRFS_FS_STATE_ERROR in fs_info->fs_state --> jumps to label "scrub_continue" cleanup_transaction() btrfs_abort_transaction(N) --> sets BTRFS_FS_STATE_TRANS_ABORTED flag in fs_info->fs_state --> sets aborted field in the transaction and transaction handle structures, for transaction N only --> removes transaction from the list fs_info->trans_list btrfs_commit_transaction(N + 1) --> transaction N + 1 was not aborted, so it proceeds (...) --> sets the transaction's state to TRANS_STATE_COMMIT_START --> does not find the previous transaction (N) in the fs_info->trans_list, so it doesn't know that transaction was aborted, and the commit of transaction N + 1 proceeds (...) --> sets transaction N + 1 state to TRANS_STATE_UNBLOCKED btrfs_write_and_wait_transaction() --> succeeds writing all extent buffers created in the transaction N + 1 write_all_supers() --> succeeds --> we now have a superblock on disk that points to trees that refer to at least one extent buffer that was never persisted So fix this by updating the transaction commit path to check if the flag BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting the transaction to the TRANS_STATE_COMMIT_START we do not find any previous transaction in the fs_info->trans_list. If the flag is set, just fail the transaction commit with -EROFS, as we do in other places. The exact error code for the previous transaction abort was already logged and reported. Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-25 13:27:04 +03:00
/*
* The previous transaction was aborted and was already removed
* from the list of transactions at fs_info->trans_list. So we
* abort to prevent writing a new superblock that reflects a
* corrupt state (pointing to trees with unwritten nodes/leafs).
*/
if (test_bit(BTRFS_FS_STATE_TRANS_ABORTED, &fs_info->fs_state)) {
ret = -EROFS;
goto cleanup_transaction;
}
}
extwriter_counter_dec(cur_trans, trans->type);
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
ret = btrfs_start_delalloc_flush(trans);
if (ret)
goto cleanup_transaction;
ret = btrfs_run_delayed_items(trans);
if (ret)
goto cleanup_transaction;
wait_event(cur_trans->writer_wait,
extwriter_counter_read(cur_trans) == 0);
/* some pending stuffs might be added after the previous flush. */
ret = btrfs_run_delayed_items(trans);
if (ret)
goto cleanup_transaction;
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes When we are mixing buffered writes with direct IO writes against the same file and snapshotting is happening concurrently, we can end up with a corrupt file content in the snapshot. Example: 1) Inode/file is empty. 2) Snapshotting starts. 2) Buffered write at offset 0 length 256Kb. This updates the i_size of the inode to 256Kb, disk_i_size remains zero. This happens after the task doing the snapshot flushes all existing delalloc. 3) DIO write at offset 256Kb length 768Kb. Once the ordered extent completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and updates the inode item in the fs tree with a size of 1Mb (which is the value of disk_i_size). 4) The dealloc for the range [0, 256Kb[ did not start yet. 5) The transaction used in the DIO ordered extent completion, which updated the inode item, is committed by the snapshotting task. 6) Snapshot creation completes. 7) Dealloc for the range [0, 256Kb[ is flushed. After that when reading the file from the snapshot we always get zeroes for the range [0, 256Kb[, the file has a size of 1Mb and the data written by the direct IO write is found. From an application's point of view this is a corruption, since in the source subvolume it could never read a version of the file that included the data from the direct IO write without the data from the buffered write included as well. In the snapshot's tree, file extent items are missing for the range [0, 256Kb[. The issue, obviously, does not happen when using the -o flushoncommit mount option. Fix this by flushing delalloc for all the roots that are about to be snapshotted when committing a transaction. This guarantees total ordering when updating the disk_i_size of an inode since the flush for dealloc is done when a transaction is in the TRANS_STATE_COMMIT_START state and wait is done once no more external writers exist. This is similar to what we do when using the flushoncommit mount option, but we do it only if the transaction has snapshots to create and only for the roots of the subvolumes to be snapshotted. The bulk of the dealloc is flushed in the snapshot creation ioctl, so the flush work we do inside the transaction is minimized. This issue, involving buffered and direct IO writes with snapshotting, is often triggered by fstest btrfs/078, and got reported by fsck when not using the NO_HOLES features, for example: $ cat results/btrfs/078.full (...) _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** [1/7] checking root items [2/7] checking extents [3/7] checking free space cache [4/7] checking fs roots root 258 inode 264 errors 100, file extent discount Found file extent holes: start: 524288, len: 65536 ERROR: errors found in fs roots Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-02-27 16:42:30 +03:00
btrfs_wait_delalloc_flush(trans);
btrfs_scrub_pause(fs_info);
/*
* Ok now we need to make sure to block out any other joins while we
* commit the transaction. We could have started a join before setting
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
* COMMIT_DOING so make sure to wait for num_writers to == 1 again.
*/
spin_lock(&fs_info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
cur_trans->state = TRANS_STATE_COMMIT_DOING;
spin_unlock(&fs_info->trans_lock);
wait_event(cur_trans->writer_wait,
atomic_read(&cur_trans->num_writers) == 1);
/* ->aborted might be set after the previous check, so check it */
if (unlikely(READ_ONCE(cur_trans->aborted))) {
ret = cur_trans->aborted;
goto scrub_continue;
}
/*
* the reloc mutex makes sure that we stop
* the balancing code from coming in and moving
* extents around in the middle of the commit
*/
mutex_lock(&fs_info->reloc_mutex);
/*
* We needn't worry about the delayed items because we will
* deal with them in create_pending_snapshot(), which is the
* core function of the snapshot creation.
*/
ret = create_pending_snapshots(trans);
if (ret) {
mutex_unlock(&fs_info->reloc_mutex);
goto scrub_continue;
}
/*
* We insert the dir indexes of the snapshots and update the inode
* of the snapshots' parents after the snapshot creation, so there
* are some delayed items which are not dealt with. Now deal with
* them.
*
* We needn't worry that this operation will corrupt the snapshots,
* because all the tree which are snapshoted will be forced to COW
* the nodes and leaves.
*/
ret = btrfs_run_delayed_items(trans);
if (ret) {
mutex_unlock(&fs_info->reloc_mutex);
goto scrub_continue;
}
btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dave@jikos.cz> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 14:12:22 +04:00
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret) {
mutex_unlock(&fs_info->reloc_mutex);
goto scrub_continue;
}
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 17:10:06 +03:00
/*
* make sure none of the code above managed to slip in a
* delayed item
*/
btrfs_assert_delayed_root_empty(fs_info);
WARN_ON(cur_trans != trans->transaction);
/* btrfs_commit_tree_roots is responsible for getting the
* various roots consistent with each other. Every pointer
* in the tree of tree roots has to point to the most up to date
* root for every subvolume and other tree. So, we have to keep
* the tree logging code from jumping in and changing any
* of the trees.
*
* At this point in the commit, there can't be any tree-log
* writers, but a little lower down we drop the trans mutex
* and let new people in. By holding the tree_log_mutex
* from now until after the super is written, we avoid races
* with the tree-log code.
*/
mutex_lock(&fs_info->tree_log_mutex);
ret = commit_fs_roots(trans);
if (ret) {
mutex_unlock(&fs_info->tree_log_mutex);
mutex_unlock(&fs_info->reloc_mutex);
goto scrub_continue;
}
/*
* Since the transaction is done, we can apply the pending changes
* before the next transaction.
*/
btrfs_apply_pending_changes(fs_info);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
/* commit_fs_roots gets rid of all the tree log roots, it is now
* safe to free the root of tree log roots
*/
btrfs_free_log_root_tree(trans, fs_info);
/*
* commit_fs_roots() can call btrfs_save_ino_cache(), which generates
* new delayed refs. Must handle them or qgroup can be wrong.
*/
ret = btrfs_run_delayed_refs(trans, (unsigned long)-1);
if (ret) {
mutex_unlock(&fs_info->tree_log_mutex);
mutex_unlock(&fs_info->reloc_mutex);
goto scrub_continue;
}
/*
* Since fs roots are all committed, we can get a quite accurate
* new_roots. So let's do quota accounting.
*/
ret = btrfs_qgroup_account_extents(trans);
if (ret < 0) {
mutex_unlock(&fs_info->tree_log_mutex);
mutex_unlock(&fs_info->reloc_mutex);
goto scrub_continue;
}
ret = commit_cowonly_roots(trans);
if (ret) {
mutex_unlock(&fs_info->tree_log_mutex);
mutex_unlock(&fs_info->reloc_mutex);
goto scrub_continue;
}
/*
* The tasks which save the space cache and inode cache may also
* update ->aborted, check it.
*/
if (unlikely(READ_ONCE(cur_trans->aborted))) {
ret = cur_trans->aborted;
mutex_unlock(&fs_info->tree_log_mutex);
mutex_unlock(&fs_info->reloc_mutex);
goto scrub_continue;
}
btrfs_prepare_extent_commit(fs_info);
cur_trans = fs_info->running_transaction;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
btrfs_set_root_node(&fs_info->tree_root->root_item,
fs_info->tree_root->node);
list_add_tail(&fs_info->tree_root->dirty_list,
&cur_trans->switch_commits);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
btrfs_set_root_node(&fs_info->chunk_root->root_item,
fs_info->chunk_root->node);
list_add_tail(&fs_info->chunk_root->dirty_list,
&cur_trans->switch_commits);
switch_commit_roots(cur_trans);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
ASSERT(list_empty(&cur_trans->dirty_bgs));
ASSERT(list_empty(&cur_trans->io_bgs));
update_super_roots(fs_info);
btrfs_set_super_log_root(fs_info->super_copy, 0);
btrfs_set_super_log_root_level(fs_info->super_copy, 0);
memcpy(fs_info->super_for_commit, fs_info->super_copy,
sizeof(*fs_info->super_copy));
btrfs_commit_device_sizes(cur_trans);
clear_bit(BTRFS_FS_LOG1_ERR, &fs_info->flags);
clear_bit(BTRFS_FS_LOG2_ERR, &fs_info->flags);
Btrfs: be aware of btree inode write errors to avoid fs corruption While we have a transaction ongoing, the VM might decide at any time to call btree_inode->i_mapping->a_ops->writepages(), which will start writeback of dirty pages belonging to btree nodes/leafs. This call might return an error or the writeback might finish with an error before we attempt to commit the running transaction. If this happens, we might have no way of knowing that such error happened when we are committing the transaction - because the pages might no longer be marked dirty nor tagged for writeback (if a subsequent modification to the extent buffer didn't happen before the transaction commit) which makes filemap_fdata[write|wait]_range unable to find such pages (even if they're marked with SetPageError). So if this happens we must abort the transaction, otherwise we commit a super block with btree roots that point to btree nodes/leafs whose content on disk is invalid - either garbage or the content of some node/leaf from a past generation that got cowed or deleted and is no longer valid (for this later case we end up getting error messages like "parent transid verify failed on 10826481664 wanted 25748 found 29562" when reading btree nodes/leafs from disk). Note that setting and checking AS_EIO/AS_ENOSPC in the btree inode's i_mapping would not be enough because we need to distinguish between log tree extents (not fatal) vs non-log tree extents (fatal) and because the next call to filemap_fdatawait_range() will catch and clear such errors in the mapping - and that call might be from a log sync and not from a transaction commit, which means we would not know about the error at transaction commit time. Also, checking for the eb flag EXTENT_BUFFER_IOERR at transaction commit time isn't done and would not be completely reliable, as the eb might be removed from memory and read back when trying to get it, which clears that flag right before reading the eb's pages from disk, making us not know about the previous write error. Using the new 3 flags for the btree inode also makes us achieve the goal of AS_EIO/AS_ENOSPC when writepages() returns success, started writeback for all dirty pages and before filemap_fdatawait_range() is called, the writeback for all dirty pages had already finished with errors - because we were not using AS_EIO/AS_ENOSPC, filemap_fdatawait_range() would return success, as it could not know that writeback errors happened (the pages were no longer tagged for writeback). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-26 15:25:56 +04:00
Btrfs: fix -ENOSPC when finishing block group creation While creating a block group, we often end up getting ENOSPC while updating the chunk tree, which leads to a transaction abortion that produces a trace like the following: [30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]() [30670.117777] BTRFS: Transaction aborted (error -28) (...) [30670.163567] Call Trace: [30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b [30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad [30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb [30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48 [30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs] [30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs] [30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs] [30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs] [30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs] [30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15 [30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de [30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f [30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62 [30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [30670.187792] ---[ end trace 0373e6b491c4a8cc ]--- This is because we don't do proper space reservation for the chunk block reserve when we have multiple tasks allocating chunks in parallel. So block group creation has 2 phases, and the first phase essentially checks if there is enough space in the system space_info, allocating a new system chunk if there isn't, while the second phase updates the device, extent and chunk trees. However, because the updates to the chunk tree happen in the second phase, if we have N tasks, each with its own transaction handle, allocating new chunks in parallel and if there is only enough space in the system space_info to allocate M chunks, where M < N, none of the tasks ends up allocating a new system chunk in the first phase and N - M tasks will get -ENOSPC when attempting to update the chunk tree in phase 2 if they need to COW any nodes/leafs from the chunk tree. Fix this by doing proper reservation in the chunk block reserve. The issue could be reproduced by running fstests generic/038 in a loop, which eventually triggered the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-20 16:01:54 +03:00
btrfs_trans_release_chunk_metadata(trans);
spin_lock(&fs_info->trans_lock);
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
cur_trans->state = TRANS_STATE_UNBLOCKED;
fs_info->running_transaction = NULL;
spin_unlock(&fs_info->trans_lock);
mutex_unlock(&fs_info->reloc_mutex);
wake_up(&fs_info->transaction_wait);
ret = btrfs_write_and_wait_transaction(trans);
if (ret) {
btrfs_handle_fs_error(fs_info, ret,
"Error while writing out transaction");
mutex_unlock(&fs_info->tree_log_mutex);
goto scrub_continue;
}
ret = write_all_supers(fs_info, 0);
/*
* the super is written, we can safely allow the tree-loggers
* to go about their business
*/
mutex_unlock(&fs_info->tree_log_mutex);
if (ret)
goto scrub_continue;
btrfs_finish_extent_commit(trans);
if (test_bit(BTRFS_TRANS_HAVE_FREE_BGS, &cur_trans->flags))
btrfs_clear_space_info_full(fs_info);
btrfs: Fix out-of-space bug Btrfs will report NO_SPACE when we create and remove files for several times, and we can't write to filesystem until mount it again. Steps to reproduce: 1: Create a single-dev btrfs fs with default option 2: Write a file into it to take up most fs space 3: Delete above file 4: Wait about 100s to let chunk removed 5: goto 2 Script is like following: #!/bin/bash # Recommend 1.2G space, too large disk will make test slow DEV="/dev/sda16" MNT="/mnt/tmp" dev_size="$(lsblk -bn -o SIZE "$DEV")" || exit 2 file_size_m=$((dev_size * 75 / 100 / 1024 / 1024)) echo "Loop write ${file_size_m}M file on $((dev_size / 1024 / 1024))M dev" for ((i = 0; i < 10; i++)); do umount "$MNT" 2>/dev/null; done echo "mkfs $DEV" mkfs.btrfs -f "$DEV" >/dev/null || exit 2 echo "mount $DEV $MNT" mount "$DEV" "$MNT" || exit 2 for ((loop_i = 0; loop_i < 20; loop_i++)); do echo echo "loop $loop_i" echo "dd file..." cmd=(dd if=/dev/zero of="$MNT"/file0 bs=1M count="$file_size_m") "${cmd[@]}" 2>/dev/null || { # NO_SPACE error triggered echo "dd failed: ${cmd[*]}" exit 1 } echo "rm file..." rm -f "$MNT"/file0 || exit 2 for ((i = 0; i < 10; i++)); do df "$MNT" | tail -1 sleep 10 done done Reason: It is triggered by commit: 47ab2a6c689913db23ccae38349714edf8365e0a which is used to remove empty block groups automatically, but the reason is not in that patch. Code before works well because btrfs don't need to create and delete chunks so many times with high complexity. Above bug is caused by many reason, any of them can trigger it. Reason1: When we remove some continuous chunks but leave other chunks after, these disk space should be used by chunk-recreating, but in current code, only first create will successed. Fixed by Forrest Liu <forrestl@synology.com> in: Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Reason2: contains_pending_extent() return wrong value in calculation. Fixed by Forrest Liu <forrestl@synology.com> in: Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Reason3: btrfs_check_data_free_space() try to commit transaction and retry allocating chunk when the first allocating failed, but space_info->full is set in first allocating, and prevent second allocating in retry. Fixed in this patch by clear space_info->full in commit transaction. Tested for severial times by above script. Changelog v3->v4: use light weight int instead of atomic_t to record have_remove_bgs in transaction, suggested by: Josef Bacik <jbacik@fb.com> Changelog v2->v3: v2 fixed the bug by adding more commit-transaction, but we only need to reclaim space when we are really have no space for new chunk, noticed by: Filipe David Manana <fdmanana@gmail.com> Actually, our code already have this type of commit-and-retry, we only need to make it working with removed-bgs. v3 fixed the bug with above way. Changelog v1->v2: v1 will introduce a new bug when delete and create chunk in same disk space in same transaction, noticed by: Filipe David Manana <fdmanana@gmail.com> V2 fix this bug by commit transaction after remove block grops. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Suggested-by: Filipe David Manana <fdmanana@gmail.com> Suggested-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-12 09:18:17 +03:00
fs_info->last_trans_committed = cur_trans->transid;
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 07:53:43 +04:00
/*
* We needn't acquire the lock here because there is no other task
* which can change it.
*/
cur_trans->state = TRANS_STATE_COMPLETED;
wake_up(&cur_trans->commit_wait);
clear_bit(BTRFS_FS_NEED_ASYNC_COMMIT, &fs_info->flags);
spin_lock(&fs_info->trans_lock);
list_del_init(&cur_trans->list);
spin_unlock(&fs_info->trans_lock);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
btrfs_put_transaction(cur_trans);
btrfs_put_transaction(cur_trans);
if (trans->type & __TRANS_FREEZABLE)
sb_end_intwrite(fs_info->sb);
trace_btrfs_transaction_commit(trans->root);
Btrfs: add initial tracepoint support for btrfs Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-24 14:18:59 +03:00
btrfs_scrub_continue(fs_info);
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 00:12:44 +04:00
if (current->journal_info == trans)
current->journal_info = NULL;
kmem_cache_free(btrfs_trans_handle_cachep, trans);
return ret;
scrub_continue:
btrfs_scrub_continue(fs_info);
cleanup_transaction:
btrfs_trans_release_metadata(trans);
btrfs: clean up pending block groups when transaction commit aborts The fstests generic/475 stresses transaction aborts and can reveal space accounting or use-after-free bugs regarding block goups. In this case the pending block groups that remain linked to the structures after transaction commit aborts in the middle. The corrupted slabs lead to failures in following tests, eg. generic/476 [ 8172.752887] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 [ 8172.755799] #PF error: [normal kernel read fault] [ 8172.757571] PGD 661ae067 P4D 661ae067 PUD 3db8e067 PMD 0 [ 8172.759000] Oops: 0000 [#1] PREEMPT SMP [ 8172.760209] CPU: 0 PID: 39 Comm: kswapd0 Tainted: G W 5.0.0-rc2-default #408 [ 8172.762495] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8172.765772] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 8172.770453] RSP: 0018:ffff967f00663b18 EFLAGS: 00010287 [ 8172.771184] RAX: 0000000000000000 RBX: ffff967f00663c20 RCX: 0000000000000000 [ 8172.772850] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c0620ab20e0 [ 8172.774629] RBP: ffff967f00663dd8 R08: 0000000000000000 R09: 0000000000000000 [ 8172.776094] R10: ffff8c0620ab22f8 R11: ffff8c063f772688 R12: ffff967f00663b78 [ 8172.777533] R13: ffff8c063f625600 R14: ffff8c063f625608 R15: dead000000000200 [ 8172.778886] FS: 0000000000000000(0000) GS:ffff8c063d400000(0000) knlGS:0000000000000000 [ 8172.780545] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8172.781787] CR2: 0000000000000058 CR3: 000000004e962000 CR4: 00000000000006f0 [ 8172.783547] Call Trace: [ 8172.784112] shrink_inactive_list+0x194/0x410 [ 8172.784747] shrink_node_memcg.constprop.85+0x3a5/0x6a0 [ 8172.785472] shrink_node+0x62/0x1e0 [ 8172.786011] balance_pgdat+0x216/0x460 [ 8172.786577] kswapd+0xe3/0x4a0 [ 8172.787085] ? finish_wait+0x80/0x80 [ 8172.787795] ? balance_pgdat+0x460/0x460 [ 8172.788799] kthread+0x116/0x130 [ 8172.789640] ? kthread_create_on_node+0x60/0x60 [ 8172.790323] ret_from_fork+0x24/0x30 [ 8172.794253] CR2: 0000000000000058 or accounting errors at umount time: [ 8159.537251] WARNING: CPU: 2 PID: 19031 at fs/btrfs/extent-tree.c:5987 btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.543325] CPU: 2 PID: 19031 Comm: umount Tainted: G W 5.0.0-rc2-default #408 [ 8159.545472] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 8159.548155] RIP: 0010:btrfs_free_block_groups+0x3d5/0x410 [btrfs] [ 8159.554030] RSP: 0018:ffff967f079cbde8 EFLAGS: 00010206 [ 8159.555144] RAX: 0000000001000000 RBX: ffff8c06366cf800 RCX: 0000000000000000 [ 8159.556730] RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff8c06255ad800 [ 8159.558279] RBP: ffff8c0637ac0000 R08: 0000000000000001 R09: 0000000000000000 [ 8159.559797] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8c0637ac0108 [ 8159.561296] R13: ffff8c0637ac0158 R14: 0000000000000000 R15: dead000000000100 [ 8159.562852] FS: 00007f7f693b9fc0(0000) GS:ffff8c063d800000(0000) knlGS:0000000000000000 [ 8159.564839] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8159.566160] CR2: 00007f7f68fab7b0 CR3: 000000000aec7000 CR4: 00000000000006e0 [ 8159.567898] Call Trace: [ 8159.568597] close_ctree+0x17f/0x350 [btrfs] [ 8159.569628] generic_shutdown_super+0x64/0x100 [ 8159.570808] kill_anon_super+0x14/0x30 [ 8159.571857] btrfs_kill_super+0x12/0xa0 [btrfs] [ 8159.573063] deactivate_locked_super+0x29/0x60 [ 8159.574234] cleanup_mnt+0x3b/0x70 [ 8159.575176] task_work_run+0x98/0xc0 [ 8159.576177] exit_to_usermode_loop+0x83/0x90 [ 8159.577315] do_syscall_64+0x15b/0x180 [ 8159.578339] entry_SYSCALL_64_after_hwframe+0x49/0xbe This fix is based on 2 Josef's patches that used sideefects of btrfs_create_pending_block_groups, this fix introduces the helper that does what we need. CC: stable@vger.kernel.org # 4.4+ CC: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-23 19:09:16 +03:00
btrfs_cleanup_pending_block_groups(trans);
Btrfs: fix -ENOSPC when finishing block group creation While creating a block group, we often end up getting ENOSPC while updating the chunk tree, which leads to a transaction abortion that produces a trace like the following: [30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]() [30670.117777] BTRFS: Transaction aborted (error -28) (...) [30670.163567] Call Trace: [30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b [30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad [30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb [30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48 [30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs] [30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs] [30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs] [30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs] [30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs] [30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15 [30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de [30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f [30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62 [30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [30670.187792] ---[ end trace 0373e6b491c4a8cc ]--- This is because we don't do proper space reservation for the chunk block reserve when we have multiple tasks allocating chunks in parallel. So block group creation has 2 phases, and the first phase essentially checks if there is enough space in the system space_info, allocating a new system chunk if there isn't, while the second phase updates the device, extent and chunk trees. However, because the updates to the chunk tree happen in the second phase, if we have N tasks, each with its own transaction handle, allocating new chunks in parallel and if there is only enough space in the system space_info to allocate M chunks, where M < N, none of the tasks ends up allocating a new system chunk in the first phase and N - M tasks will get -ENOSPC when attempting to update the chunk tree in phase 2 if they need to COW any nodes/leafs from the chunk tree. Fix this by doing proper reservation in the chunk block reserve. The issue could be reproduced by running fstests generic/038 in a loop, which eventually triggered the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-20 16:01:54 +03:00
btrfs_trans_release_chunk_metadata(trans);
trans->block_rsv = NULL;
btrfs_warn(fs_info, "Skipping commit of aborted transaction.");
if (current->journal_info == trans)
current->journal_info = NULL;
cleanup_transaction(trans, ret);
return ret;
}
/*
* return < 0 if error
* 0 if there are no more dead_roots at the time of call
* 1 there are more to be processed, call me again
*
* The return value indicates there are certainly more snapshots to delete, but
* if there comes a new one during processing, it may return 0. We don't mind,
* because btrfs_commit_super will poke cleaner thread and it will process it a
* few seconds later.
*/
int btrfs_clean_one_deleted_snapshot(struct btrfs_root *root)
{
int ret;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 18:45:14 +04:00
struct btrfs_fs_info *fs_info = root->fs_info;
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_lock(&fs_info->trans_lock);
if (list_empty(&fs_info->dead_roots)) {
spin_unlock(&fs_info->trans_lock);
return 0;
}
root = list_first_entry(&fs_info->dead_roots,
struct btrfs_root, root_list);
list_del_init(&root->root_list);
Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-12 01:25:13 +04:00
spin_unlock(&fs_info->trans_lock);
btrfs_debug(fs_info, "cleaner removing %llu", root->root_key.objectid);
btrfs_kill_all_delayed_nodes(root);
btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dave@jikos.cz> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 14:12:22 +04:00
if (btrfs_header_backref_rev(root->node) <
BTRFS_MIXED_BACKREF_REV)
ret = btrfs_drop_snapshot(root, NULL, 0, 0);
else
ret = btrfs_drop_snapshot(root, NULL, 1, 0);
return (ret < 0) ? 0 : 1;
}
void btrfs_apply_pending_changes(struct btrfs_fs_info *fs_info)
{
unsigned long prev;
unsigned long bit;
prev = xchg(&fs_info->pending_changes, 0);
if (!prev)
return;
bit = 1 << BTRFS_PENDING_SET_INODE_MAP_CACHE;
if (prev & bit)
btrfs_set_opt(fs_info->mount_opt, INODE_MAP_CACHE);
prev &= ~bit;
bit = 1 << BTRFS_PENDING_CLEAR_INODE_MAP_CACHE;
if (prev & bit)
btrfs_clear_opt(fs_info->mount_opt, INODE_MAP_CACHE);
prev &= ~bit;
bit = 1 << BTRFS_PENDING_COMMIT;
if (prev & bit)
btrfs_debug(fs_info, "pending commit done");
prev &= ~bit;
if (prev)
btrfs_warn(fs_info,
"unknown pending changes left 0x%lx, ignoring", prev);
}