WSL2-Linux-Kernel/drivers/rtc/rtc-pcf2127.c

939 строки
23 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* An I2C and SPI driver for the NXP PCF2127/29 RTC
* Copyright 2013 Til-Technologies
*
* Author: Renaud Cerrato <r.cerrato@til-technologies.fr>
*
* Watchdog and tamper functions
* Author: Bruno Thomsen <bruno.thomsen@gmail.com>
*
* based on the other drivers in this same directory.
*
* Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf
*/
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/bcd.h>
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
#include <linux/watchdog.h>
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
/* Control register 1 */
#define PCF2127_REG_CTRL1 0x00
#define PCF2127_BIT_CTRL1_TSF1 BIT(4)
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
/* Control register 2 */
#define PCF2127_REG_CTRL2 0x01
#define PCF2127_BIT_CTRL2_AIE BIT(1)
#define PCF2127_BIT_CTRL2_TSIE BIT(2)
#define PCF2127_BIT_CTRL2_AF BIT(4)
#define PCF2127_BIT_CTRL2_TSF2 BIT(5)
#define PCF2127_BIT_CTRL2_WDTF BIT(6)
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
/* Control register 3 */
#define PCF2127_REG_CTRL3 0x02
#define PCF2127_BIT_CTRL3_BLIE BIT(0)
#define PCF2127_BIT_CTRL3_BIE BIT(1)
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
#define PCF2127_BIT_CTRL3_BLF BIT(2)
#define PCF2127_BIT_CTRL3_BF BIT(3)
#define PCF2127_BIT_CTRL3_BTSE BIT(4)
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
/* Time and date registers */
#define PCF2127_REG_SC 0x03
#define PCF2127_BIT_SC_OSF BIT(7)
#define PCF2127_REG_MN 0x04
#define PCF2127_REG_HR 0x05
#define PCF2127_REG_DM 0x06
#define PCF2127_REG_DW 0x07
#define PCF2127_REG_MO 0x08
#define PCF2127_REG_YR 0x09
/* Alarm registers */
#define PCF2127_REG_ALARM_SC 0x0A
#define PCF2127_REG_ALARM_MN 0x0B
#define PCF2127_REG_ALARM_HR 0x0C
#define PCF2127_REG_ALARM_DM 0x0D
#define PCF2127_REG_ALARM_DW 0x0E
#define PCF2127_BIT_ALARM_AE BIT(7)
/* Watchdog registers */
#define PCF2127_REG_WD_CTL 0x10
#define PCF2127_BIT_WD_CTL_TF0 BIT(0)
#define PCF2127_BIT_WD_CTL_TF1 BIT(1)
#define PCF2127_BIT_WD_CTL_CD0 BIT(6)
#define PCF2127_BIT_WD_CTL_CD1 BIT(7)
#define PCF2127_REG_WD_VAL 0x11
/* Tamper timestamp registers */
#define PCF2127_REG_TS_CTRL 0x12
#define PCF2127_BIT_TS_CTRL_TSOFF BIT(6)
#define PCF2127_BIT_TS_CTRL_TSM BIT(7)
#define PCF2127_REG_TS_SC 0x13
#define PCF2127_REG_TS_MN 0x14
#define PCF2127_REG_TS_HR 0x15
#define PCF2127_REG_TS_DM 0x16
#define PCF2127_REG_TS_MO 0x17
#define PCF2127_REG_TS_YR 0x18
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
/*
* RAM registers
* PCF2127 has 512 bytes general-purpose static RAM (SRAM) that is
* battery backed and can survive a power outage.
* PCF2129 doesn't have this feature.
*/
#define PCF2127_REG_RAM_ADDR_MSB 0x1A
#define PCF2127_REG_RAM_WRT_CMD 0x1C
#define PCF2127_REG_RAM_RD_CMD 0x1D
/* Watchdog timer value constants */
#define PCF2127_WD_VAL_STOP 0
#define PCF2127_WD_VAL_MIN 2
#define PCF2127_WD_VAL_MAX 255
#define PCF2127_WD_VAL_DEFAULT 60
struct pcf2127 {
struct rtc_device *rtc;
struct watchdog_device wdd;
struct regmap *regmap;
};
/*
* In the routines that deal directly with the pcf2127 hardware, we use
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
*/
static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
unsigned char buf[10];
int ret;
/*
* Avoid reading CTRL2 register as it causes WD_VAL register
* value to reset to 0 which means watchdog is stopped.
*/
ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL3,
(buf + PCF2127_REG_CTRL3),
ARRAY_SIZE(buf) - PCF2127_REG_CTRL3);
if (ret) {
dev_err(dev, "%s: read error\n", __func__);
return ret;
}
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
dev_info(dev,
"low voltage detected, check/replace RTC battery.\n");
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
/* Clock integrity is not guaranteed when OSF flag is set. */
if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
/*
* no need clear the flag here,
* it will be cleared once the new date is saved
*/
dev_warn(dev,
"oscillator stop detected, date/time is not reliable\n");
return -EINVAL;
}
dev_dbg(dev,
"%s: raw data is cr3=%02x, sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
__func__, buf[PCF2127_REG_CTRL3], buf[PCF2127_REG_SC],
buf[PCF2127_REG_MN], buf[PCF2127_REG_HR],
buf[PCF2127_REG_DM], buf[PCF2127_REG_DW],
buf[PCF2127_REG_MO], buf[PCF2127_REG_YR]);
tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); /* rtc hr 0-23 */
tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]);
tm->tm_year += 100;
dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
return 0;
}
static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
unsigned char buf[7];
int i = 0, err;
dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
/* hours, minutes and seconds */
buf[i++] = bin2bcd(tm->tm_sec); /* this will also clear OSF flag */
buf[i++] = bin2bcd(tm->tm_min);
buf[i++] = bin2bcd(tm->tm_hour);
buf[i++] = bin2bcd(tm->tm_mday);
buf[i++] = tm->tm_wday & 0x07;
/* month, 1 - 12 */
buf[i++] = bin2bcd(tm->tm_mon + 1);
/* year */
buf[i++] = bin2bcd(tm->tm_year - 100);
/* write register's data */
err = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_SC, buf, i);
if (err) {
dev_err(dev,
"%s: err=%d", __func__, err);
return err;
}
return 0;
}
static int pcf2127_rtc_ioctl(struct device *dev,
unsigned int cmd, unsigned long arg)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
int val, touser = 0;
int ret;
switch (cmd) {
case RTC_VL_READ:
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &val);
if (ret)
return ret;
if (val & PCF2127_BIT_CTRL3_BLF)
touser |= RTC_VL_BACKUP_LOW;
if (val & PCF2127_BIT_CTRL3_BF)
touser |= RTC_VL_BACKUP_SWITCH;
return put_user(touser, (unsigned int __user *)arg);
case RTC_VL_CLR:
return regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3,
PCF2127_BIT_CTRL3_BF, 0);
default:
return -ENOIOCTLCMD;
}
}
static const struct rtc_class_ops pcf2127_rtc_ops = {
.ioctl = pcf2127_rtc_ioctl,
.read_time = pcf2127_rtc_read_time,
.set_time = pcf2127_rtc_set_time,
};
static int pcf2127_nvmem_read(void *priv, unsigned int offset,
void *val, size_t bytes)
{
struct pcf2127 *pcf2127 = priv;
int ret;
unsigned char offsetbuf[] = { offset >> 8, offset };
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB,
offsetbuf, 2);
if (ret)
return ret;
return regmap_bulk_read(pcf2127->regmap, PCF2127_REG_RAM_RD_CMD,
val, bytes);
}
static int pcf2127_nvmem_write(void *priv, unsigned int offset,
void *val, size_t bytes)
{
struct pcf2127 *pcf2127 = priv;
int ret;
unsigned char offsetbuf[] = { offset >> 8, offset };
rtc: pcf2127: cleanup register and bit defines Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 16:19:33 +03:00
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB,
offsetbuf, 2);
if (ret)
return ret;
return regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_WRT_CMD,
val, bytes);
}
/* watchdog driver */
static int pcf2127_wdt_ping(struct watchdog_device *wdd)
{
struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd);
return regmap_write(pcf2127->regmap, PCF2127_REG_WD_VAL, wdd->timeout);
}
/*
* Restart watchdog timer if feature is active.
*
* Note: Reading CTRL2 register causes watchdog to stop which is unfortunate,
* since register also contain control/status flags for other features.
* Always call this function after reading CTRL2 register.
*/
static int pcf2127_wdt_active_ping(struct watchdog_device *wdd)
{
int ret = 0;
if (watchdog_active(wdd)) {
ret = pcf2127_wdt_ping(wdd);
if (ret)
dev_err(wdd->parent,
"%s: watchdog restart failed, ret=%d\n",
__func__, ret);
}
return ret;
}
static int pcf2127_wdt_start(struct watchdog_device *wdd)
{
return pcf2127_wdt_ping(wdd);
}
static int pcf2127_wdt_stop(struct watchdog_device *wdd)
{
struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd);
return regmap_write(pcf2127->regmap, PCF2127_REG_WD_VAL,
PCF2127_WD_VAL_STOP);
}
static int pcf2127_wdt_set_timeout(struct watchdog_device *wdd,
unsigned int new_timeout)
{
dev_dbg(wdd->parent, "new watchdog timeout: %is (old: %is)\n",
new_timeout, wdd->timeout);
wdd->timeout = new_timeout;
return pcf2127_wdt_active_ping(wdd);
}
static const struct watchdog_info pcf2127_wdt_info = {
.identity = "NXP PCF2127/PCF2129 Watchdog",
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
};
static const struct watchdog_ops pcf2127_watchdog_ops = {
.owner = THIS_MODULE,
.start = pcf2127_wdt_start,
.stop = pcf2127_wdt_stop,
.ping = pcf2127_wdt_ping,
.set_timeout = pcf2127_wdt_set_timeout,
};
static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
{
u32 wdd_timeout;
int ret;
if (!IS_ENABLED(CONFIG_WATCHDOG) ||
!device_property_read_bool(dev, "reset-source"))
return 0;
pcf2127->wdd.parent = dev;
pcf2127->wdd.info = &pcf2127_wdt_info;
pcf2127->wdd.ops = &pcf2127_watchdog_ops;
pcf2127->wdd.min_timeout = PCF2127_WD_VAL_MIN;
pcf2127->wdd.max_timeout = PCF2127_WD_VAL_MAX;
pcf2127->wdd.timeout = PCF2127_WD_VAL_DEFAULT;
pcf2127->wdd.min_hw_heartbeat_ms = 500;
pcf2127->wdd.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
watchdog_set_drvdata(&pcf2127->wdd, pcf2127);
/* Test if watchdog timer is started by bootloader */
ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout);
if (ret)
return ret;
if (wdd_timeout)
set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status);
return devm_watchdog_register_device(dev, &pcf2127->wdd);
}
/* Alarm */
static int pcf2127_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
unsigned int buf[5], ctrl2;
int ret;
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
if (ret)
return ret;
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
if (ret)
return ret;
ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_ALARM_SC, buf,
sizeof(buf));
if (ret)
return ret;
alrm->enabled = ctrl2 & PCF2127_BIT_CTRL2_AIE;
alrm->pending = ctrl2 & PCF2127_BIT_CTRL2_AF;
alrm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
alrm->time.tm_min = bcd2bin(buf[1] & 0x7F);
alrm->time.tm_hour = bcd2bin(buf[2] & 0x3F);
alrm->time.tm_mday = bcd2bin(buf[3] & 0x3F);
return 0;
}
static int pcf2127_rtc_alarm_irq_enable(struct device *dev, u32 enable)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
int ret;
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
PCF2127_BIT_CTRL2_AIE,
enable ? PCF2127_BIT_CTRL2_AIE : 0);
if (ret)
return ret;
return pcf2127_wdt_active_ping(&pcf2127->wdd);
}
static int pcf2127_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
uint8_t buf[5];
int ret;
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
PCF2127_BIT_CTRL2_AF, 0);
if (ret)
return ret;
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
if (ret)
return ret;
buf[0] = bin2bcd(alrm->time.tm_sec);
buf[1] = bin2bcd(alrm->time.tm_min);
buf[2] = bin2bcd(alrm->time.tm_hour);
buf[3] = bin2bcd(alrm->time.tm_mday);
buf[4] = PCF2127_BIT_ALARM_AE; /* Do not match on week day */
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_ALARM_SC, buf,
sizeof(buf));
if (ret)
return ret;
return pcf2127_rtc_alarm_irq_enable(dev, alrm->enabled);
}
static irqreturn_t pcf2127_rtc_irq(int irq, void *dev)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
unsigned int ctrl2 = 0;
int ret = 0;
ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
if (ret)
return IRQ_NONE;
if (!(ctrl2 & PCF2127_BIT_CTRL2_AF))
return IRQ_NONE;
regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,
ctrl2 & ~(PCF2127_BIT_CTRL2_AF | PCF2127_BIT_CTRL2_WDTF));
rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF);
pcf2127_wdt_active_ping(&pcf2127->wdd);
return IRQ_HANDLED;
}
static const struct rtc_class_ops pcf2127_rtc_alrm_ops = {
.ioctl = pcf2127_rtc_ioctl,
.read_time = pcf2127_rtc_read_time,
.set_time = pcf2127_rtc_set_time,
.read_alarm = pcf2127_rtc_read_alarm,
.set_alarm = pcf2127_rtc_set_alarm,
.alarm_irq_enable = pcf2127_rtc_alarm_irq_enable,
};
/* sysfs interface */
static ssize_t timestamp0_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent);
int ret;
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
PCF2127_BIT_CTRL1_TSF1, 0);
if (ret) {
dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret);
return ret;
}
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
PCF2127_BIT_CTRL2_TSF2, 0);
if (ret) {
dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret);
return ret;
}
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
if (ret)
return ret;
return count;
};
static ssize_t timestamp0_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent);
struct rtc_time tm;
int ret;
unsigned char data[25];
ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data,
sizeof(data));
if (ret) {
dev_err(dev, "%s: read error ret=%d\n", __func__, ret);
return ret;
}
dev_dbg(dev,
"%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, "
"ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n",
__func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2],
data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC],
data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR],
data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO],
data[PCF2127_REG_TS_YR]);
ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
if (ret)
return ret;
if (!(data[PCF2127_REG_CTRL1] & PCF2127_BIT_CTRL1_TSF1) &&
!(data[PCF2127_REG_CTRL2] & PCF2127_BIT_CTRL2_TSF2))
return 0;
tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F);
tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F);
tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F);
tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F);
/* TS_MO register (month) value range: 1-12 */
tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1;
tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]);
if (tm.tm_year < 70)
tm.tm_year += 100; /* assume we are in 1970...2069 */
ret = rtc_valid_tm(&tm);
if (ret)
return ret;
return sprintf(buf, "%llu\n",
(unsigned long long)rtc_tm_to_time64(&tm));
};
static DEVICE_ATTR_RW(timestamp0);
static struct attribute *pcf2127_attrs[] = {
&dev_attr_timestamp0.attr,
NULL
};
static const struct attribute_group pcf2127_attr_group = {
.attrs = pcf2127_attrs,
};
static int pcf2127_probe(struct device *dev, struct regmap *regmap,
int alarm_irq, const char *name, bool has_nvmem)
{
struct pcf2127 *pcf2127;
int ret = 0;
dev_dbg(dev, "%s\n", __func__);
pcf2127 = devm_kzalloc(dev, sizeof(*pcf2127), GFP_KERNEL);
if (!pcf2127)
return -ENOMEM;
pcf2127->regmap = regmap;
dev_set_drvdata(dev, pcf2127);
pcf2127->rtc = devm_rtc_allocate_device(dev);
if (IS_ERR(pcf2127->rtc))
return PTR_ERR(pcf2127->rtc);
pcf2127->rtc->ops = &pcf2127_rtc_ops;
pcf2127->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
pcf2127->rtc->range_max = RTC_TIMESTAMP_END_2099;
pcf2127->rtc->set_start_time = true; /* Sets actual start to 1970 */
pcf2127->rtc->uie_unsupported = 1;
if (alarm_irq > 0) {
ret = devm_request_threaded_irq(dev, alarm_irq, NULL,
pcf2127_rtc_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
dev_name(dev), dev);
if (ret) {
dev_err(dev, "failed to request alarm irq\n");
return ret;
}
}
if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) {
device_init_wakeup(dev, true);
pcf2127->rtc->ops = &pcf2127_rtc_alrm_ops;
}
if (has_nvmem) {
struct nvmem_config nvmem_cfg = {
.priv = pcf2127,
.reg_read = pcf2127_nvmem_read,
.reg_write = pcf2127_nvmem_write,
.size = 512,
};
ret = devm_rtc_nvmem_register(pcf2127->rtc, &nvmem_cfg);
}
/*
* Watchdog timer enabled and reset pin /RST activated when timed out.
* Select 1Hz clock source for watchdog timer.
* Note: Countdown timer disabled and not available.
*/
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_WD_CTL,
PCF2127_BIT_WD_CTL_CD1 |
PCF2127_BIT_WD_CTL_CD0 |
PCF2127_BIT_WD_CTL_TF1 |
PCF2127_BIT_WD_CTL_TF0,
PCF2127_BIT_WD_CTL_CD1 |
PCF2127_BIT_WD_CTL_CD0 |
PCF2127_BIT_WD_CTL_TF1);
if (ret) {
dev_err(dev, "%s: watchdog config (wd_ctl) failed\n", __func__);
return ret;
}
pcf2127_watchdog_init(dev, pcf2127);
/*
* Disable battery low/switch-over timestamp and interrupts.
* Clear battery interrupt flags which can block new trigger events.
* Note: This is the default chip behaviour but added to ensure
* correct tamper timestamp and interrupt function.
*/
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3,
PCF2127_BIT_CTRL3_BTSE |
PCF2127_BIT_CTRL3_BIE |
PCF2127_BIT_CTRL3_BLIE, 0);
if (ret) {
dev_err(dev, "%s: interrupt config (ctrl3) failed\n",
__func__);
return ret;
}
/*
* Enable timestamp function and store timestamp of first trigger
* event until TSF1 and TFS2 interrupt flags are cleared.
*/
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_TS_CTRL,
PCF2127_BIT_TS_CTRL_TSOFF |
PCF2127_BIT_TS_CTRL_TSM,
PCF2127_BIT_TS_CTRL_TSM);
if (ret) {
dev_err(dev, "%s: tamper detection config (ts_ctrl) failed\n",
__func__);
return ret;
}
/*
* Enable interrupt generation when TSF1 or TSF2 timestamp flags
* are set. Interrupt signal is an open-drain output and can be
* left floating if unused.
*/
ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
PCF2127_BIT_CTRL2_TSIE,
PCF2127_BIT_CTRL2_TSIE);
if (ret) {
dev_err(dev, "%s: tamper detection config (ctrl2) failed\n",
__func__);
return ret;
}
ret = rtc_add_group(pcf2127->rtc, &pcf2127_attr_group);
if (ret) {
dev_err(dev, "%s: tamper sysfs registering failed\n",
__func__);
return ret;
}
return devm_rtc_register_device(pcf2127->rtc);
}
#ifdef CONFIG_OF
static const struct of_device_id pcf2127_of_match[] = {
{ .compatible = "nxp,pcf2127" },
{ .compatible = "nxp,pcf2129" },
{ .compatible = "nxp,pca2129" },
{}
};
MODULE_DEVICE_TABLE(of, pcf2127_of_match);
#endif
#if IS_ENABLED(CONFIG_I2C)
static int pcf2127_i2c_write(void *context, const void *data, size_t count)
{
struct device *dev = context;
struct i2c_client *client = to_i2c_client(dev);
int ret;
ret = i2c_master_send(client, data, count);
if (ret != count)
return ret < 0 ? ret : -EIO;
return 0;
}
static int pcf2127_i2c_gather_write(void *context,
const void *reg, size_t reg_size,
const void *val, size_t val_size)
{
struct device *dev = context;
struct i2c_client *client = to_i2c_client(dev);
int ret;
void *buf;
if (WARN_ON(reg_size != 1))
return -EINVAL;
buf = kmalloc(val_size + 1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
memcpy(buf, reg, 1);
memcpy(buf + 1, val, val_size);
ret = i2c_master_send(client, buf, val_size + 1);
kfree(buf);
if (ret != val_size + 1)
return ret < 0 ? ret : -EIO;
return 0;
}
static int pcf2127_i2c_read(void *context, const void *reg, size_t reg_size,
void *val, size_t val_size)
{
struct device *dev = context;
struct i2c_client *client = to_i2c_client(dev);
int ret;
if (WARN_ON(reg_size != 1))
return -EINVAL;
ret = i2c_master_send(client, reg, 1);
if (ret != 1)
return ret < 0 ? ret : -EIO;
ret = i2c_master_recv(client, val, val_size);
if (ret != val_size)
return ret < 0 ? ret : -EIO;
return 0;
}
/*
* The reason we need this custom regmap_bus instead of using regmap_init_i2c()
* is that the STOP condition is required between set register address and
* read register data when reading from registers.
*/
static const struct regmap_bus pcf2127_i2c_regmap = {
.write = pcf2127_i2c_write,
.gather_write = pcf2127_i2c_gather_write,
.read = pcf2127_i2c_read,
};
static struct i2c_driver pcf2127_i2c_driver;
static int pcf2127_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct regmap *regmap;
static const struct regmap_config config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x1d,
};
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap,
&client->dev, &config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "%s: regmap allocation failed: %ld\n",
__func__, PTR_ERR(regmap));
return PTR_ERR(regmap);
}
return pcf2127_probe(&client->dev, regmap, client->irq,
pcf2127_i2c_driver.driver.name, id->driver_data);
}
static const struct i2c_device_id pcf2127_i2c_id[] = {
{ "pcf2127", 1 },
{ "pcf2129", 0 },
{ "pca2129", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
static struct i2c_driver pcf2127_i2c_driver = {
.driver = {
.name = "rtc-pcf2127-i2c",
.of_match_table = of_match_ptr(pcf2127_of_match),
},
.probe = pcf2127_i2c_probe,
.id_table = pcf2127_i2c_id,
};
static int pcf2127_i2c_register_driver(void)
{
return i2c_add_driver(&pcf2127_i2c_driver);
}
static void pcf2127_i2c_unregister_driver(void)
{
i2c_del_driver(&pcf2127_i2c_driver);
}
#else
static int pcf2127_i2c_register_driver(void)
{
return 0;
}
static void pcf2127_i2c_unregister_driver(void)
{
}
#endif
#if IS_ENABLED(CONFIG_SPI_MASTER)
static struct spi_driver pcf2127_spi_driver;
static int pcf2127_spi_probe(struct spi_device *spi)
{
static const struct regmap_config config = {
.reg_bits = 8,
.val_bits = 8,
.read_flag_mask = 0xa0,
.write_flag_mask = 0x20,
.max_register = 0x1d,
};
struct regmap *regmap;
regmap = devm_regmap_init_spi(spi, &config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
__func__, PTR_ERR(regmap));
return PTR_ERR(regmap);
}
return pcf2127_probe(&spi->dev, regmap, spi->irq,
pcf2127_spi_driver.driver.name,
spi_get_device_id(spi)->driver_data);
}
static const struct spi_device_id pcf2127_spi_id[] = {
{ "pcf2127", 1 },
{ "pcf2129", 0 },
{ "pca2129", 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, pcf2127_spi_id);
static struct spi_driver pcf2127_spi_driver = {
.driver = {
.name = "rtc-pcf2127-spi",
.of_match_table = of_match_ptr(pcf2127_of_match),
},
.probe = pcf2127_spi_probe,
.id_table = pcf2127_spi_id,
};
static int pcf2127_spi_register_driver(void)
{
return spi_register_driver(&pcf2127_spi_driver);
}
static void pcf2127_spi_unregister_driver(void)
{
spi_unregister_driver(&pcf2127_spi_driver);
}
#else
static int pcf2127_spi_register_driver(void)
{
return 0;
}
static void pcf2127_spi_unregister_driver(void)
{
}
#endif
static int __init pcf2127_init(void)
{
int ret;
ret = pcf2127_i2c_register_driver();
if (ret) {
pr_err("Failed to register pcf2127 i2c driver: %d\n", ret);
return ret;
}
ret = pcf2127_spi_register_driver();
if (ret) {
pr_err("Failed to register pcf2127 spi driver: %d\n", ret);
pcf2127_i2c_unregister_driver();
}
return ret;
}
module_init(pcf2127_init)
static void __exit pcf2127_exit(void)
{
pcf2127_spi_unregister_driver();
pcf2127_i2c_unregister_driver();
}
module_exit(pcf2127_exit)
MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>");
MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver");
MODULE_LICENSE("GPL v2");