WSL2-Linux-Kernel/kernel/compat.c

1185 строки
30 KiB
C
Исходник Обычный вид История

/*
* linux/kernel/compat.c
*
* Kernel compatibililty routines for e.g. 32 bit syscall support
* on 64 bit kernels.
*
* Copyright (C) 2002-2003 Stephen Rothwell, IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <linux/compat.h>
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/signal.h>
#include <linux/sched.h> /* for MAX_SCHEDULE_TIMEOUT */
#include <linux/syscalls.h>
#include <linux/unistd.h>
#include <linux/security.h>
#include <linux/timex.h>
#include <linux/export.h>
#include <linux/migrate.h>
#include <linux/posix-timers.h>
timers: fix itimer/many thread hang Overview This patch reworks the handling of POSIX CPU timers, including the ITIMER_PROF, ITIMER_VIRT timers and rlimit handling. It was put together with the help of Roland McGrath, the owner and original writer of this code. The problem we ran into, and the reason for this rework, has to do with using a profiling timer in a process with a large number of threads. It appears that the performance of the old implementation of run_posix_cpu_timers() was at least O(n*3) (where "n" is the number of threads in a process) or worse. Everything is fine with an increasing number of threads until the time taken for that routine to run becomes the same as or greater than the tick time, at which point things degrade rather quickly. This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF." Code Changes This rework corrects the implementation of run_posix_cpu_timers() to make it run in constant time for a particular machine. (Performance may vary between one machine and another depending upon whether the kernel is built as single- or multiprocessor and, in the latter case, depending upon the number of running processors.) To do this, at each tick we now update fields in signal_struct as well as task_struct. The run_posix_cpu_timers() function uses those fields to make its decisions. We define a new structure, "task_cputime," to contain user, system and scheduler times and use these in appropriate places: struct task_cputime { cputime_t utime; cputime_t stime; unsigned long long sum_exec_runtime; }; This is included in the structure "thread_group_cputime," which is a new substructure of signal_struct and which varies for uniprocessor versus multiprocessor kernels. For uniprocessor kernels, it uses "task_cputime" as a simple substructure, while for multiprocessor kernels it is a pointer: struct thread_group_cputime { struct task_cputime totals; }; struct thread_group_cputime { struct task_cputime *totals; }; We also add a new task_cputime substructure directly to signal_struct, to cache the earliest expiration of process-wide timers, and task_cputime also replaces the it_*_expires fields of task_struct (used for earliest expiration of thread timers). The "thread_group_cputime" structure contains process-wide timers that are updated via account_user_time() and friends. In the non-SMP case the structure is a simple aggregator; unfortunately in the SMP case that simplicity was not achievable due to cache-line contention between CPUs (in one measured case performance was actually _worse_ on a 16-cpu system than the same test on a 4-cpu system, due to this contention). For SMP, the thread_group_cputime counters are maintained as a per-cpu structure allocated using alloc_percpu(). The timer functions update only the timer field in the structure corresponding to the running CPU, obtained using per_cpu_ptr(). We define a set of inline functions in sched.h that we use to maintain the thread_group_cputime structure and hide the differences between UP and SMP implementations from the rest of the kernel. The thread_group_cputime_init() function initializes the thread_group_cputime structure for the given task. The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the out-of-line function thread_group_cputime_alloc_smp() to allocate and fill in the per-cpu structures and fields. The thread_group_cputime_free() function, also a no-op for UP, in SMP frees the per-cpu structures. The thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls thread_group_cputime_alloc() if the per-cpu structures haven't yet been allocated. The thread_group_cputime() function fills the task_cputime structure it is passed with the contents of the thread_group_cputime fields; in UP it's that simple but in SMP it must also safely check that tsk->signal is non-NULL (if it is it just uses the appropriate fields of task_struct) and, if so, sums the per-cpu values for each online CPU. Finally, the three functions account_group_user_time(), account_group_system_time() and account_group_exec_runtime() are used by timer functions to update the respective fields of the thread_group_cputime structure. Non-SMP operation is trivial and will not be mentioned further. The per-cpu structure is always allocated when a task creates its first new thread, via a call to thread_group_cputime_clone_thread() from copy_signal(). It is freed at process exit via a call to thread_group_cputime_free() from cleanup_signal(). All functions that formerly summed utime/stime/sum_sched_runtime values from from all threads in the thread group now use thread_group_cputime() to snapshot the values in the thread_group_cputime structure or the values in the task structure itself if the per-cpu structure hasn't been allocated. Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit. The run_posix_cpu_timers() function has been split into a fast path and a slow path; the former safely checks whether there are any expired thread timers and, if not, just returns, while the slow path does the heavy lifting. With the dedicated thread group fields, timers are no longer "rebalanced" and the process_timer_rebalance() function and related code has gone away. All summing loops are gone and all code that used them now uses the thread_group_cputime() inline. When process-wide timers are set, the new task_cputime structure in signal_struct is used to cache the earliest expiration; this is checked in the fast path. Performance The fix appears not to add significant overhead to existing operations. It generally performs the same as the current code except in two cases, one in which it performs slightly worse (Case 5 below) and one in which it performs very significantly better (Case 2 below). Overall it's a wash except in those two cases. I've since done somewhat more involved testing on a dual-core Opteron system. Case 1: With no itimer running, for a test with 100,000 threads, the fixed kernel took 1428.5 seconds, 513 seconds more than the unfixed system, all of which was spent in the system. There were twice as many voluntary context switches with the fix as without it. Case 2: With an itimer running at .01 second ticks and 4000 threads (the most an unmodified kernel can handle), the fixed kernel ran the test in eight percent of the time (5.8 seconds as opposed to 70 seconds) and had better tick accuracy (.012 seconds per tick as opposed to .023 seconds per tick). Case 3: A 4000-thread test with an initial timer tick of .01 second and an interval of 10,000 seconds (i.e. a timer that ticks only once) had very nearly the same performance in both cases: 6.3 seconds elapsed for the fixed kernel versus 5.5 seconds for the unfixed kernel. With fewer threads (eight in these tests), the Case 1 test ran in essentially the same time on both the modified and unmodified kernels (5.2 seconds versus 5.8 seconds). The Case 2 test ran in about the same time as well, 5.9 seconds versus 5.4 seconds but again with much better tick accuracy, .013 seconds per tick versus .025 seconds per tick for the unmodified kernel. Since the fix affected the rlimit code, I also tested soft and hard CPU limits. Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer running), the modified kernel was very slightly favored in that while it killed the process in 19.997 seconds of CPU time (5.002 seconds of wall time), only .003 seconds of that was system time, the rest was user time. The unmodified kernel killed the process in 20.001 seconds of CPU (5.014 seconds of wall time) of which .016 seconds was system time. Really, though, the results were too close to call. The results were essentially the same with no itimer running. Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds (where the hard limit would never be reached) and an itimer running, the modified kernel exhibited worse tick accuracy than the unmodified kernel: .050 seconds/tick versus .028 seconds/tick. Otherwise, performance was almost indistinguishable. With no itimer running this test exhibited virtually identical behavior and times in both cases. In times past I did some limited performance testing. those results are below. On a four-cpu Opteron system without this fix, a sixteen-thread test executed in 3569.991 seconds, of which user was 3568.435s and system was 1.556s. On the same system with the fix, user and elapsed time were about the same, but system time dropped to 0.007 seconds. Performance with eight, four and one thread were comparable. Interestingly, the timer ticks with the fix seemed more accurate: The sixteen-thread test with the fix received 149543 ticks for 0.024 seconds per tick, while the same test without the fix received 58720 for 0.061 seconds per tick. Both cases were configured for an interval of 0.01 seconds. Again, the other tests were comparable. Each thread in this test computed the primes up to 25,000,000. I also did a test with a large number of threads, 100,000 threads, which is impossible without the fix. In this case each thread computed the primes only up to 10,000 (to make the runtime manageable). System time dominated, at 1546.968 seconds out of a total 2176.906 seconds (giving a user time of 629.938s). It received 147651 ticks for 0.015 seconds per tick, still quite accurate. There is obviously no comparable test without the fix. Signed-off-by: Frank Mayhar <fmayhar@google.com> Cc: Roland McGrath <roland@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-12 20:54:39 +04:00
#include <linux/times.h>
Allow times and time system calls to return small negative values At the moment, the times() system call will appear to fail for a period shortly after boot, while the value it want to return is between -4095 and -1. The same thing will also happen for the time() system call on 32-bit platforms some time in 2106 or so. On some platforms, such as x86, this is unavoidable because of the system call ABI, but other platforms such as powerpc have a separate error indication from the return value, so system calls can in fact return small negative values without indicating an error. On those platforms, force_successful_syscall_return() provides a way to indicate that the system call return value should not be treated as an error even if it is in the range which would normally be taken as a negative error number. This adds a force_successful_syscall_return() call to the time() and times() system calls plus their 32-bit compat versions, so that they don't erroneously indicate an error on those platforms whose system call ABI has a separate error indication. This will not affect anything on other platforms. Joakim Tjernlund added the fix for time() and the compat versions of time() and times(), after I did the fix for times(). Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:41:02 +03:00
#include <linux/ptrace.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/gfp.h>
#include <linux/uaccess.h>
static int compat_get_timex(struct timex *txc, struct compat_timex __user *utp)
{
memset(txc, 0, sizeof(struct timex));
if (!access_ok(VERIFY_READ, utp, sizeof(struct compat_timex)) ||
__get_user(txc->modes, &utp->modes) ||
__get_user(txc->offset, &utp->offset) ||
__get_user(txc->freq, &utp->freq) ||
__get_user(txc->maxerror, &utp->maxerror) ||
__get_user(txc->esterror, &utp->esterror) ||
__get_user(txc->status, &utp->status) ||
__get_user(txc->constant, &utp->constant) ||
__get_user(txc->precision, &utp->precision) ||
__get_user(txc->tolerance, &utp->tolerance) ||
__get_user(txc->time.tv_sec, &utp->time.tv_sec) ||
__get_user(txc->time.tv_usec, &utp->time.tv_usec) ||
__get_user(txc->tick, &utp->tick) ||
__get_user(txc->ppsfreq, &utp->ppsfreq) ||
__get_user(txc->jitter, &utp->jitter) ||
__get_user(txc->shift, &utp->shift) ||
__get_user(txc->stabil, &utp->stabil) ||
__get_user(txc->jitcnt, &utp->jitcnt) ||
__get_user(txc->calcnt, &utp->calcnt) ||
__get_user(txc->errcnt, &utp->errcnt) ||
__get_user(txc->stbcnt, &utp->stbcnt))
return -EFAULT;
return 0;
}
static int compat_put_timex(struct compat_timex __user *utp, struct timex *txc)
{
if (!access_ok(VERIFY_WRITE, utp, sizeof(struct compat_timex)) ||
__put_user(txc->modes, &utp->modes) ||
__put_user(txc->offset, &utp->offset) ||
__put_user(txc->freq, &utp->freq) ||
__put_user(txc->maxerror, &utp->maxerror) ||
__put_user(txc->esterror, &utp->esterror) ||
__put_user(txc->status, &utp->status) ||
__put_user(txc->constant, &utp->constant) ||
__put_user(txc->precision, &utp->precision) ||
__put_user(txc->tolerance, &utp->tolerance) ||
__put_user(txc->time.tv_sec, &utp->time.tv_sec) ||
__put_user(txc->time.tv_usec, &utp->time.tv_usec) ||
__put_user(txc->tick, &utp->tick) ||
__put_user(txc->ppsfreq, &utp->ppsfreq) ||
__put_user(txc->jitter, &utp->jitter) ||
__put_user(txc->shift, &utp->shift) ||
__put_user(txc->stabil, &utp->stabil) ||
__put_user(txc->jitcnt, &utp->jitcnt) ||
__put_user(txc->calcnt, &utp->calcnt) ||
__put_user(txc->errcnt, &utp->errcnt) ||
__put_user(txc->stbcnt, &utp->stbcnt) ||
__put_user(txc->tai, &utp->tai))
return -EFAULT;
return 0;
}
COMPAT_SYSCALL_DEFINE2(gettimeofday, struct compat_timeval __user *, tv,
struct timezone __user *, tz)
{
if (tv) {
struct timeval ktv;
do_gettimeofday(&ktv);
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (compat_put_timeval(&ktv, tv))
return -EFAULT;
}
if (tz) {
if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
return -EFAULT;
}
return 0;
}
COMPAT_SYSCALL_DEFINE2(settimeofday, struct compat_timeval __user *, tv,
struct timezone __user *, tz)
{
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
struct timeval user_tv;
struct timespec new_ts;
struct timezone new_tz;
if (tv) {
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (compat_get_timeval(&user_tv, tv))
return -EFAULT;
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
new_ts.tv_sec = user_tv.tv_sec;
new_ts.tv_nsec = user_tv.tv_usec * NSEC_PER_USEC;
}
if (tz) {
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (copy_from_user(&new_tz, tz, sizeof(*tz)))
return -EFAULT;
}
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
}
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
static int __compat_get_timeval(struct timeval *tv, const struct compat_timeval __user *ctv)
{
return (!access_ok(VERIFY_READ, ctv, sizeof(*ctv)) ||
__get_user(tv->tv_sec, &ctv->tv_sec) ||
__get_user(tv->tv_usec, &ctv->tv_usec)) ? -EFAULT : 0;
}
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
static int __compat_put_timeval(const struct timeval *tv, struct compat_timeval __user *ctv)
{
return (!access_ok(VERIFY_WRITE, ctv, sizeof(*ctv)) ||
__put_user(tv->tv_sec, &ctv->tv_sec) ||
__put_user(tv->tv_usec, &ctv->tv_usec)) ? -EFAULT : 0;
}
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
static int __compat_get_timespec(struct timespec *ts, const struct compat_timespec __user *cts)
{
return (!access_ok(VERIFY_READ, cts, sizeof(*cts)) ||
__get_user(ts->tv_sec, &cts->tv_sec) ||
__get_user(ts->tv_nsec, &cts->tv_nsec)) ? -EFAULT : 0;
}
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
static int __compat_put_timespec(const struct timespec *ts, struct compat_timespec __user *cts)
{
return (!access_ok(VERIFY_WRITE, cts, sizeof(*cts)) ||
__put_user(ts->tv_sec, &cts->tv_sec) ||
__put_user(ts->tv_nsec, &cts->tv_nsec)) ? -EFAULT : 0;
}
int compat_get_timeval(struct timeval *tv, const void __user *utv)
{
if (COMPAT_USE_64BIT_TIME)
return copy_from_user(tv, utv, sizeof(*tv)) ? -EFAULT : 0;
else
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
return __compat_get_timeval(tv, utv);
}
EXPORT_SYMBOL_GPL(compat_get_timeval);
int compat_put_timeval(const struct timeval *tv, void __user *utv)
{
if (COMPAT_USE_64BIT_TIME)
return copy_to_user(utv, tv, sizeof(*tv)) ? -EFAULT : 0;
else
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
return __compat_put_timeval(tv, utv);
}
EXPORT_SYMBOL_GPL(compat_put_timeval);
int compat_get_timespec(struct timespec *ts, const void __user *uts)
{
if (COMPAT_USE_64BIT_TIME)
return copy_from_user(ts, uts, sizeof(*ts)) ? -EFAULT : 0;
else
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
return __compat_get_timespec(ts, uts);
}
EXPORT_SYMBOL_GPL(compat_get_timespec);
int compat_put_timespec(const struct timespec *ts, void __user *uts)
{
if (COMPAT_USE_64BIT_TIME)
return copy_to_user(uts, ts, sizeof(*ts)) ? -EFAULT : 0;
else
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
return __compat_put_timespec(ts, uts);
}
EXPORT_SYMBOL_GPL(compat_put_timespec);
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
int compat_convert_timespec(struct timespec __user **kts,
const void __user *cts)
{
struct timespec ts;
struct timespec __user *uts;
if (!cts || COMPAT_USE_64BIT_TIME) {
*kts = (struct timespec __user *)cts;
return 0;
}
uts = compat_alloc_user_space(sizeof(ts));
if (!uts)
return -EFAULT;
if (compat_get_timespec(&ts, cts))
return -EFAULT;
if (copy_to_user(uts, &ts, sizeof(ts)))
return -EFAULT;
*kts = uts;
return 0;
}
static long compat_nanosleep_restart(struct restart_block *restart)
{
struct compat_timespec __user *rmtp;
struct timespec rmt;
mm_segment_t oldfs;
long ret;
restart->nanosleep.rmtp = (struct timespec __user *) &rmt;
oldfs = get_fs();
set_fs(KERNEL_DS);
ret = hrtimer_nanosleep_restart(restart);
set_fs(oldfs);
if (ret == -ERESTART_RESTARTBLOCK) {
rmtp = restart->nanosleep.compat_rmtp;
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (rmtp && compat_put_timespec(&rmt, rmtp))
return -EFAULT;
}
return ret;
}
COMPAT_SYSCALL_DEFINE2(nanosleep, struct compat_timespec __user *, rqtp,
struct compat_timespec __user *, rmtp)
{
struct timespec tu, rmt;
mm_segment_t oldfs;
long ret;
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (compat_get_timespec(&tu, rqtp))
return -EFAULT;
if (!timespec_valid(&tu))
return -EINVAL;
oldfs = get_fs();
set_fs(KERNEL_DS);
ret = hrtimer_nanosleep(&tu,
rmtp ? (struct timespec __user *)&rmt : NULL,
HRTIMER_MODE_REL, CLOCK_MONOTONIC);
set_fs(oldfs);
/*
* hrtimer_nanosleep() can only return 0 or
* -ERESTART_RESTARTBLOCK here because:
*
* - we call it with HRTIMER_MODE_REL and therefor exclude the
* -ERESTARTNOHAND return path.
*
* - we supply the rmtp argument from the task stack (due to
* the necessary compat conversion. So the update cannot
* fail, which excludes the -EFAULT return path as well. If
* it fails nevertheless we have a bigger problem and wont
* reach this place anymore.
*
* - if the return value is 0, we do not have to update rmtp
* because there is no remaining time.
*
* We check for -ERESTART_RESTARTBLOCK nevertheless if the
* core implementation decides to return random nonsense.
*/
if (ret == -ERESTART_RESTARTBLOCK) {
all arches, signal: move restart_block to struct task_struct If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: Richard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 02:01:14 +03:00
struct restart_block *restart = &current->restart_block;
restart->fn = compat_nanosleep_restart;
restart->nanosleep.compat_rmtp = rmtp;
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (rmtp && compat_put_timespec(&rmt, rmtp))
return -EFAULT;
}
return ret;
}
static inline long get_compat_itimerval(struct itimerval *o,
struct compat_itimerval __user *i)
{
return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
(__get_user(o->it_interval.tv_sec, &i->it_interval.tv_sec) |
__get_user(o->it_interval.tv_usec, &i->it_interval.tv_usec) |
__get_user(o->it_value.tv_sec, &i->it_value.tv_sec) |
__get_user(o->it_value.tv_usec, &i->it_value.tv_usec)));
}
static inline long put_compat_itimerval(struct compat_itimerval __user *o,
struct itimerval *i)
{
return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
(__put_user(i->it_interval.tv_sec, &o->it_interval.tv_sec) |
__put_user(i->it_interval.tv_usec, &o->it_interval.tv_usec) |
__put_user(i->it_value.tv_sec, &o->it_value.tv_sec) |
__put_user(i->it_value.tv_usec, &o->it_value.tv_usec)));
}
asmlinkage long sys_ni_posix_timers(void);
COMPAT_SYSCALL_DEFINE2(getitimer, int, which,
struct compat_itimerval __user *, it)
{
struct itimerval kit;
int error;
if (!IS_ENABLED(CONFIG_POSIX_TIMERS))
return sys_ni_posix_timers();
error = do_getitimer(which, &kit);
if (!error && put_compat_itimerval(it, &kit))
error = -EFAULT;
return error;
}
COMPAT_SYSCALL_DEFINE3(setitimer, int, which,
struct compat_itimerval __user *, in,
struct compat_itimerval __user *, out)
{
struct itimerval kin, kout;
int error;
if (!IS_ENABLED(CONFIG_POSIX_TIMERS))
return sys_ni_posix_timers();
if (in) {
if (get_compat_itimerval(&kin, in))
return -EFAULT;
} else
memset(&kin, 0, sizeof(kin));
error = do_setitimer(which, &kin, out ? &kout : NULL);
if (error || !out)
return error;
if (put_compat_itimerval(out, &kout))
return -EFAULT;
return 0;
}
timers: fix itimer/many thread hang Overview This patch reworks the handling of POSIX CPU timers, including the ITIMER_PROF, ITIMER_VIRT timers and rlimit handling. It was put together with the help of Roland McGrath, the owner and original writer of this code. The problem we ran into, and the reason for this rework, has to do with using a profiling timer in a process with a large number of threads. It appears that the performance of the old implementation of run_posix_cpu_timers() was at least O(n*3) (where "n" is the number of threads in a process) or worse. Everything is fine with an increasing number of threads until the time taken for that routine to run becomes the same as or greater than the tick time, at which point things degrade rather quickly. This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF." Code Changes This rework corrects the implementation of run_posix_cpu_timers() to make it run in constant time for a particular machine. (Performance may vary between one machine and another depending upon whether the kernel is built as single- or multiprocessor and, in the latter case, depending upon the number of running processors.) To do this, at each tick we now update fields in signal_struct as well as task_struct. The run_posix_cpu_timers() function uses those fields to make its decisions. We define a new structure, "task_cputime," to contain user, system and scheduler times and use these in appropriate places: struct task_cputime { cputime_t utime; cputime_t stime; unsigned long long sum_exec_runtime; }; This is included in the structure "thread_group_cputime," which is a new substructure of signal_struct and which varies for uniprocessor versus multiprocessor kernels. For uniprocessor kernels, it uses "task_cputime" as a simple substructure, while for multiprocessor kernels it is a pointer: struct thread_group_cputime { struct task_cputime totals; }; struct thread_group_cputime { struct task_cputime *totals; }; We also add a new task_cputime substructure directly to signal_struct, to cache the earliest expiration of process-wide timers, and task_cputime also replaces the it_*_expires fields of task_struct (used for earliest expiration of thread timers). The "thread_group_cputime" structure contains process-wide timers that are updated via account_user_time() and friends. In the non-SMP case the structure is a simple aggregator; unfortunately in the SMP case that simplicity was not achievable due to cache-line contention between CPUs (in one measured case performance was actually _worse_ on a 16-cpu system than the same test on a 4-cpu system, due to this contention). For SMP, the thread_group_cputime counters are maintained as a per-cpu structure allocated using alloc_percpu(). The timer functions update only the timer field in the structure corresponding to the running CPU, obtained using per_cpu_ptr(). We define a set of inline functions in sched.h that we use to maintain the thread_group_cputime structure and hide the differences between UP and SMP implementations from the rest of the kernel. The thread_group_cputime_init() function initializes the thread_group_cputime structure for the given task. The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the out-of-line function thread_group_cputime_alloc_smp() to allocate and fill in the per-cpu structures and fields. The thread_group_cputime_free() function, also a no-op for UP, in SMP frees the per-cpu structures. The thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls thread_group_cputime_alloc() if the per-cpu structures haven't yet been allocated. The thread_group_cputime() function fills the task_cputime structure it is passed with the contents of the thread_group_cputime fields; in UP it's that simple but in SMP it must also safely check that tsk->signal is non-NULL (if it is it just uses the appropriate fields of task_struct) and, if so, sums the per-cpu values for each online CPU. Finally, the three functions account_group_user_time(), account_group_system_time() and account_group_exec_runtime() are used by timer functions to update the respective fields of the thread_group_cputime structure. Non-SMP operation is trivial and will not be mentioned further. The per-cpu structure is always allocated when a task creates its first new thread, via a call to thread_group_cputime_clone_thread() from copy_signal(). It is freed at process exit via a call to thread_group_cputime_free() from cleanup_signal(). All functions that formerly summed utime/stime/sum_sched_runtime values from from all threads in the thread group now use thread_group_cputime() to snapshot the values in the thread_group_cputime structure or the values in the task structure itself if the per-cpu structure hasn't been allocated. Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit. The run_posix_cpu_timers() function has been split into a fast path and a slow path; the former safely checks whether there are any expired thread timers and, if not, just returns, while the slow path does the heavy lifting. With the dedicated thread group fields, timers are no longer "rebalanced" and the process_timer_rebalance() function and related code has gone away. All summing loops are gone and all code that used them now uses the thread_group_cputime() inline. When process-wide timers are set, the new task_cputime structure in signal_struct is used to cache the earliest expiration; this is checked in the fast path. Performance The fix appears not to add significant overhead to existing operations. It generally performs the same as the current code except in two cases, one in which it performs slightly worse (Case 5 below) and one in which it performs very significantly better (Case 2 below). Overall it's a wash except in those two cases. I've since done somewhat more involved testing on a dual-core Opteron system. Case 1: With no itimer running, for a test with 100,000 threads, the fixed kernel took 1428.5 seconds, 513 seconds more than the unfixed system, all of which was spent in the system. There were twice as many voluntary context switches with the fix as without it. Case 2: With an itimer running at .01 second ticks and 4000 threads (the most an unmodified kernel can handle), the fixed kernel ran the test in eight percent of the time (5.8 seconds as opposed to 70 seconds) and had better tick accuracy (.012 seconds per tick as opposed to .023 seconds per tick). Case 3: A 4000-thread test with an initial timer tick of .01 second and an interval of 10,000 seconds (i.e. a timer that ticks only once) had very nearly the same performance in both cases: 6.3 seconds elapsed for the fixed kernel versus 5.5 seconds for the unfixed kernel. With fewer threads (eight in these tests), the Case 1 test ran in essentially the same time on both the modified and unmodified kernels (5.2 seconds versus 5.8 seconds). The Case 2 test ran in about the same time as well, 5.9 seconds versus 5.4 seconds but again with much better tick accuracy, .013 seconds per tick versus .025 seconds per tick for the unmodified kernel. Since the fix affected the rlimit code, I also tested soft and hard CPU limits. Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer running), the modified kernel was very slightly favored in that while it killed the process in 19.997 seconds of CPU time (5.002 seconds of wall time), only .003 seconds of that was system time, the rest was user time. The unmodified kernel killed the process in 20.001 seconds of CPU (5.014 seconds of wall time) of which .016 seconds was system time. Really, though, the results were too close to call. The results were essentially the same with no itimer running. Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds (where the hard limit would never be reached) and an itimer running, the modified kernel exhibited worse tick accuracy than the unmodified kernel: .050 seconds/tick versus .028 seconds/tick. Otherwise, performance was almost indistinguishable. With no itimer running this test exhibited virtually identical behavior and times in both cases. In times past I did some limited performance testing. those results are below. On a four-cpu Opteron system without this fix, a sixteen-thread test executed in 3569.991 seconds, of which user was 3568.435s and system was 1.556s. On the same system with the fix, user and elapsed time were about the same, but system time dropped to 0.007 seconds. Performance with eight, four and one thread were comparable. Interestingly, the timer ticks with the fix seemed more accurate: The sixteen-thread test with the fix received 149543 ticks for 0.024 seconds per tick, while the same test without the fix received 58720 for 0.061 seconds per tick. Both cases were configured for an interval of 0.01 seconds. Again, the other tests were comparable. Each thread in this test computed the primes up to 25,000,000. I also did a test with a large number of threads, 100,000 threads, which is impossible without the fix. In this case each thread computed the primes only up to 10,000 (to make the runtime manageable). System time dominated, at 1546.968 seconds out of a total 2176.906 seconds (giving a user time of 629.938s). It received 147651 ticks for 0.015 seconds per tick, still quite accurate. There is obviously no comparable test without the fix. Signed-off-by: Frank Mayhar <fmayhar@google.com> Cc: Roland McGrath <roland@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-12 20:54:39 +04:00
static compat_clock_t clock_t_to_compat_clock_t(clock_t x)
{
return compat_jiffies_to_clock_t(clock_t_to_jiffies(x));
}
COMPAT_SYSCALL_DEFINE1(times, struct compat_tms __user *, tbuf)
{
if (tbuf) {
timers: fix itimer/many thread hang Overview This patch reworks the handling of POSIX CPU timers, including the ITIMER_PROF, ITIMER_VIRT timers and rlimit handling. It was put together with the help of Roland McGrath, the owner and original writer of this code. The problem we ran into, and the reason for this rework, has to do with using a profiling timer in a process with a large number of threads. It appears that the performance of the old implementation of run_posix_cpu_timers() was at least O(n*3) (where "n" is the number of threads in a process) or worse. Everything is fine with an increasing number of threads until the time taken for that routine to run becomes the same as or greater than the tick time, at which point things degrade rather quickly. This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF." Code Changes This rework corrects the implementation of run_posix_cpu_timers() to make it run in constant time for a particular machine. (Performance may vary between one machine and another depending upon whether the kernel is built as single- or multiprocessor and, in the latter case, depending upon the number of running processors.) To do this, at each tick we now update fields in signal_struct as well as task_struct. The run_posix_cpu_timers() function uses those fields to make its decisions. We define a new structure, "task_cputime," to contain user, system and scheduler times and use these in appropriate places: struct task_cputime { cputime_t utime; cputime_t stime; unsigned long long sum_exec_runtime; }; This is included in the structure "thread_group_cputime," which is a new substructure of signal_struct and which varies for uniprocessor versus multiprocessor kernels. For uniprocessor kernels, it uses "task_cputime" as a simple substructure, while for multiprocessor kernels it is a pointer: struct thread_group_cputime { struct task_cputime totals; }; struct thread_group_cputime { struct task_cputime *totals; }; We also add a new task_cputime substructure directly to signal_struct, to cache the earliest expiration of process-wide timers, and task_cputime also replaces the it_*_expires fields of task_struct (used for earliest expiration of thread timers). The "thread_group_cputime" structure contains process-wide timers that are updated via account_user_time() and friends. In the non-SMP case the structure is a simple aggregator; unfortunately in the SMP case that simplicity was not achievable due to cache-line contention between CPUs (in one measured case performance was actually _worse_ on a 16-cpu system than the same test on a 4-cpu system, due to this contention). For SMP, the thread_group_cputime counters are maintained as a per-cpu structure allocated using alloc_percpu(). The timer functions update only the timer field in the structure corresponding to the running CPU, obtained using per_cpu_ptr(). We define a set of inline functions in sched.h that we use to maintain the thread_group_cputime structure and hide the differences between UP and SMP implementations from the rest of the kernel. The thread_group_cputime_init() function initializes the thread_group_cputime structure for the given task. The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the out-of-line function thread_group_cputime_alloc_smp() to allocate and fill in the per-cpu structures and fields. The thread_group_cputime_free() function, also a no-op for UP, in SMP frees the per-cpu structures. The thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls thread_group_cputime_alloc() if the per-cpu structures haven't yet been allocated. The thread_group_cputime() function fills the task_cputime structure it is passed with the contents of the thread_group_cputime fields; in UP it's that simple but in SMP it must also safely check that tsk->signal is non-NULL (if it is it just uses the appropriate fields of task_struct) and, if so, sums the per-cpu values for each online CPU. Finally, the three functions account_group_user_time(), account_group_system_time() and account_group_exec_runtime() are used by timer functions to update the respective fields of the thread_group_cputime structure. Non-SMP operation is trivial and will not be mentioned further. The per-cpu structure is always allocated when a task creates its first new thread, via a call to thread_group_cputime_clone_thread() from copy_signal(). It is freed at process exit via a call to thread_group_cputime_free() from cleanup_signal(). All functions that formerly summed utime/stime/sum_sched_runtime values from from all threads in the thread group now use thread_group_cputime() to snapshot the values in the thread_group_cputime structure or the values in the task structure itself if the per-cpu structure hasn't been allocated. Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit. The run_posix_cpu_timers() function has been split into a fast path and a slow path; the former safely checks whether there are any expired thread timers and, if not, just returns, while the slow path does the heavy lifting. With the dedicated thread group fields, timers are no longer "rebalanced" and the process_timer_rebalance() function and related code has gone away. All summing loops are gone and all code that used them now uses the thread_group_cputime() inline. When process-wide timers are set, the new task_cputime structure in signal_struct is used to cache the earliest expiration; this is checked in the fast path. Performance The fix appears not to add significant overhead to existing operations. It generally performs the same as the current code except in two cases, one in which it performs slightly worse (Case 5 below) and one in which it performs very significantly better (Case 2 below). Overall it's a wash except in those two cases. I've since done somewhat more involved testing on a dual-core Opteron system. Case 1: With no itimer running, for a test with 100,000 threads, the fixed kernel took 1428.5 seconds, 513 seconds more than the unfixed system, all of which was spent in the system. There were twice as many voluntary context switches with the fix as without it. Case 2: With an itimer running at .01 second ticks and 4000 threads (the most an unmodified kernel can handle), the fixed kernel ran the test in eight percent of the time (5.8 seconds as opposed to 70 seconds) and had better tick accuracy (.012 seconds per tick as opposed to .023 seconds per tick). Case 3: A 4000-thread test with an initial timer tick of .01 second and an interval of 10,000 seconds (i.e. a timer that ticks only once) had very nearly the same performance in both cases: 6.3 seconds elapsed for the fixed kernel versus 5.5 seconds for the unfixed kernel. With fewer threads (eight in these tests), the Case 1 test ran in essentially the same time on both the modified and unmodified kernels (5.2 seconds versus 5.8 seconds). The Case 2 test ran in about the same time as well, 5.9 seconds versus 5.4 seconds but again with much better tick accuracy, .013 seconds per tick versus .025 seconds per tick for the unmodified kernel. Since the fix affected the rlimit code, I also tested soft and hard CPU limits. Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer running), the modified kernel was very slightly favored in that while it killed the process in 19.997 seconds of CPU time (5.002 seconds of wall time), only .003 seconds of that was system time, the rest was user time. The unmodified kernel killed the process in 20.001 seconds of CPU (5.014 seconds of wall time) of which .016 seconds was system time. Really, though, the results were too close to call. The results were essentially the same with no itimer running. Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds (where the hard limit would never be reached) and an itimer running, the modified kernel exhibited worse tick accuracy than the unmodified kernel: .050 seconds/tick versus .028 seconds/tick. Otherwise, performance was almost indistinguishable. With no itimer running this test exhibited virtually identical behavior and times in both cases. In times past I did some limited performance testing. those results are below. On a four-cpu Opteron system without this fix, a sixteen-thread test executed in 3569.991 seconds, of which user was 3568.435s and system was 1.556s. On the same system with the fix, user and elapsed time were about the same, but system time dropped to 0.007 seconds. Performance with eight, four and one thread were comparable. Interestingly, the timer ticks with the fix seemed more accurate: The sixteen-thread test with the fix received 149543 ticks for 0.024 seconds per tick, while the same test without the fix received 58720 for 0.061 seconds per tick. Both cases were configured for an interval of 0.01 seconds. Again, the other tests were comparable. Each thread in this test computed the primes up to 25,000,000. I also did a test with a large number of threads, 100,000 threads, which is impossible without the fix. In this case each thread computed the primes only up to 10,000 (to make the runtime manageable). System time dominated, at 1546.968 seconds out of a total 2176.906 seconds (giving a user time of 629.938s). It received 147651 ticks for 0.015 seconds per tick, still quite accurate. There is obviously no comparable test without the fix. Signed-off-by: Frank Mayhar <fmayhar@google.com> Cc: Roland McGrath <roland@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-12 20:54:39 +04:00
struct tms tms;
struct compat_tms tmp;
timers: fix itimer/many thread hang Overview This patch reworks the handling of POSIX CPU timers, including the ITIMER_PROF, ITIMER_VIRT timers and rlimit handling. It was put together with the help of Roland McGrath, the owner and original writer of this code. The problem we ran into, and the reason for this rework, has to do with using a profiling timer in a process with a large number of threads. It appears that the performance of the old implementation of run_posix_cpu_timers() was at least O(n*3) (where "n" is the number of threads in a process) or worse. Everything is fine with an increasing number of threads until the time taken for that routine to run becomes the same as or greater than the tick time, at which point things degrade rather quickly. This patch fixes bug 9906, "Weird hang with NPTL and SIGPROF." Code Changes This rework corrects the implementation of run_posix_cpu_timers() to make it run in constant time for a particular machine. (Performance may vary between one machine and another depending upon whether the kernel is built as single- or multiprocessor and, in the latter case, depending upon the number of running processors.) To do this, at each tick we now update fields in signal_struct as well as task_struct. The run_posix_cpu_timers() function uses those fields to make its decisions. We define a new structure, "task_cputime," to contain user, system and scheduler times and use these in appropriate places: struct task_cputime { cputime_t utime; cputime_t stime; unsigned long long sum_exec_runtime; }; This is included in the structure "thread_group_cputime," which is a new substructure of signal_struct and which varies for uniprocessor versus multiprocessor kernels. For uniprocessor kernels, it uses "task_cputime" as a simple substructure, while for multiprocessor kernels it is a pointer: struct thread_group_cputime { struct task_cputime totals; }; struct thread_group_cputime { struct task_cputime *totals; }; We also add a new task_cputime substructure directly to signal_struct, to cache the earliest expiration of process-wide timers, and task_cputime also replaces the it_*_expires fields of task_struct (used for earliest expiration of thread timers). The "thread_group_cputime" structure contains process-wide timers that are updated via account_user_time() and friends. In the non-SMP case the structure is a simple aggregator; unfortunately in the SMP case that simplicity was not achievable due to cache-line contention between CPUs (in one measured case performance was actually _worse_ on a 16-cpu system than the same test on a 4-cpu system, due to this contention). For SMP, the thread_group_cputime counters are maintained as a per-cpu structure allocated using alloc_percpu(). The timer functions update only the timer field in the structure corresponding to the running CPU, obtained using per_cpu_ptr(). We define a set of inline functions in sched.h that we use to maintain the thread_group_cputime structure and hide the differences between UP and SMP implementations from the rest of the kernel. The thread_group_cputime_init() function initializes the thread_group_cputime structure for the given task. The thread_group_cputime_alloc() is a no-op for UP; for SMP it calls the out-of-line function thread_group_cputime_alloc_smp() to allocate and fill in the per-cpu structures and fields. The thread_group_cputime_free() function, also a no-op for UP, in SMP frees the per-cpu structures. The thread_group_cputime_clone_thread() function (also a UP no-op) for SMP calls thread_group_cputime_alloc() if the per-cpu structures haven't yet been allocated. The thread_group_cputime() function fills the task_cputime structure it is passed with the contents of the thread_group_cputime fields; in UP it's that simple but in SMP it must also safely check that tsk->signal is non-NULL (if it is it just uses the appropriate fields of task_struct) and, if so, sums the per-cpu values for each online CPU. Finally, the three functions account_group_user_time(), account_group_system_time() and account_group_exec_runtime() are used by timer functions to update the respective fields of the thread_group_cputime structure. Non-SMP operation is trivial and will not be mentioned further. The per-cpu structure is always allocated when a task creates its first new thread, via a call to thread_group_cputime_clone_thread() from copy_signal(). It is freed at process exit via a call to thread_group_cputime_free() from cleanup_signal(). All functions that formerly summed utime/stime/sum_sched_runtime values from from all threads in the thread group now use thread_group_cputime() to snapshot the values in the thread_group_cputime structure or the values in the task structure itself if the per-cpu structure hasn't been allocated. Finally, the code in kernel/posix-cpu-timers.c has changed quite a bit. The run_posix_cpu_timers() function has been split into a fast path and a slow path; the former safely checks whether there are any expired thread timers and, if not, just returns, while the slow path does the heavy lifting. With the dedicated thread group fields, timers are no longer "rebalanced" and the process_timer_rebalance() function and related code has gone away. All summing loops are gone and all code that used them now uses the thread_group_cputime() inline. When process-wide timers are set, the new task_cputime structure in signal_struct is used to cache the earliest expiration; this is checked in the fast path. Performance The fix appears not to add significant overhead to existing operations. It generally performs the same as the current code except in two cases, one in which it performs slightly worse (Case 5 below) and one in which it performs very significantly better (Case 2 below). Overall it's a wash except in those two cases. I've since done somewhat more involved testing on a dual-core Opteron system. Case 1: With no itimer running, for a test with 100,000 threads, the fixed kernel took 1428.5 seconds, 513 seconds more than the unfixed system, all of which was spent in the system. There were twice as many voluntary context switches with the fix as without it. Case 2: With an itimer running at .01 second ticks and 4000 threads (the most an unmodified kernel can handle), the fixed kernel ran the test in eight percent of the time (5.8 seconds as opposed to 70 seconds) and had better tick accuracy (.012 seconds per tick as opposed to .023 seconds per tick). Case 3: A 4000-thread test with an initial timer tick of .01 second and an interval of 10,000 seconds (i.e. a timer that ticks only once) had very nearly the same performance in both cases: 6.3 seconds elapsed for the fixed kernel versus 5.5 seconds for the unfixed kernel. With fewer threads (eight in these tests), the Case 1 test ran in essentially the same time on both the modified and unmodified kernels (5.2 seconds versus 5.8 seconds). The Case 2 test ran in about the same time as well, 5.9 seconds versus 5.4 seconds but again with much better tick accuracy, .013 seconds per tick versus .025 seconds per tick for the unmodified kernel. Since the fix affected the rlimit code, I also tested soft and hard CPU limits. Case 4: With a hard CPU limit of 20 seconds and eight threads (and an itimer running), the modified kernel was very slightly favored in that while it killed the process in 19.997 seconds of CPU time (5.002 seconds of wall time), only .003 seconds of that was system time, the rest was user time. The unmodified kernel killed the process in 20.001 seconds of CPU (5.014 seconds of wall time) of which .016 seconds was system time. Really, though, the results were too close to call. The results were essentially the same with no itimer running. Case 5: With a soft limit of 20 seconds and a hard limit of 2000 seconds (where the hard limit would never be reached) and an itimer running, the modified kernel exhibited worse tick accuracy than the unmodified kernel: .050 seconds/tick versus .028 seconds/tick. Otherwise, performance was almost indistinguishable. With no itimer running this test exhibited virtually identical behavior and times in both cases. In times past I did some limited performance testing. those results are below. On a four-cpu Opteron system without this fix, a sixteen-thread test executed in 3569.991 seconds, of which user was 3568.435s and system was 1.556s. On the same system with the fix, user and elapsed time were about the same, but system time dropped to 0.007 seconds. Performance with eight, four and one thread were comparable. Interestingly, the timer ticks with the fix seemed more accurate: The sixteen-thread test with the fix received 149543 ticks for 0.024 seconds per tick, while the same test without the fix received 58720 for 0.061 seconds per tick. Both cases were configured for an interval of 0.01 seconds. Again, the other tests were comparable. Each thread in this test computed the primes up to 25,000,000. I also did a test with a large number of threads, 100,000 threads, which is impossible without the fix. In this case each thread computed the primes only up to 10,000 (to make the runtime manageable). System time dominated, at 1546.968 seconds out of a total 2176.906 seconds (giving a user time of 629.938s). It received 147651 ticks for 0.015 seconds per tick, still quite accurate. There is obviously no comparable test without the fix. Signed-off-by: Frank Mayhar <fmayhar@google.com> Cc: Roland McGrath <roland@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-12 20:54:39 +04:00
do_sys_times(&tms);
/* Convert our struct tms to the compat version. */
tmp.tms_utime = clock_t_to_compat_clock_t(tms.tms_utime);
tmp.tms_stime = clock_t_to_compat_clock_t(tms.tms_stime);
tmp.tms_cutime = clock_t_to_compat_clock_t(tms.tms_cutime);
tmp.tms_cstime = clock_t_to_compat_clock_t(tms.tms_cstime);
if (copy_to_user(tbuf, &tmp, sizeof(tmp)))
return -EFAULT;
}
Allow times and time system calls to return small negative values At the moment, the times() system call will appear to fail for a period shortly after boot, while the value it want to return is between -4095 and -1. The same thing will also happen for the time() system call on 32-bit platforms some time in 2106 or so. On some platforms, such as x86, this is unavoidable because of the system call ABI, but other platforms such as powerpc have a separate error indication from the return value, so system calls can in fact return small negative values without indicating an error. On those platforms, force_successful_syscall_return() provides a way to indicate that the system call return value should not be treated as an error even if it is in the range which would normally be taken as a negative error number. This adds a force_successful_syscall_return() call to the time() and times() system calls plus their 32-bit compat versions, so that they don't erroneously indicate an error on those platforms whose system call ABI has a separate error indication. This will not affect anything on other platforms. Joakim Tjernlund added the fix for time() and the compat versions of time() and times(), after I did the fix for times(). Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:41:02 +03:00
force_successful_syscall_return();
return compat_jiffies_to_clock_t(jiffies);
}
#ifdef __ARCH_WANT_SYS_SIGPENDING
/*
* Assumption: old_sigset_t and compat_old_sigset_t are both
* types that can be passed to put_user()/get_user().
*/
COMPAT_SYSCALL_DEFINE1(sigpending, compat_old_sigset_t __user *, set)
{
old_sigset_t s;
long ret;
mm_segment_t old_fs = get_fs();
set_fs(KERNEL_DS);
ret = sys_sigpending((old_sigset_t __user *) &s);
set_fs(old_fs);
if (ret == 0)
ret = put_user(s, set);
return ret;
}
#endif
#ifdef __ARCH_WANT_SYS_SIGPROCMASK
/*
* sys_sigprocmask SIG_SETMASK sets the first (compat) word of the
* blocked set of signals to the supplied signal set
*/
static inline void compat_sig_setmask(sigset_t *blocked, compat_sigset_word set)
{
memcpy(blocked->sig, &set, sizeof(set));
}
COMPAT_SYSCALL_DEFINE3(sigprocmask, int, how,
compat_old_sigset_t __user *, nset,
compat_old_sigset_t __user *, oset)
{
old_sigset_t old_set, new_set;
sigset_t new_blocked;
old_set = current->blocked.sig[0];
if (nset) {
if (get_user(new_set, nset))
return -EFAULT;
new_set &= ~(sigmask(SIGKILL) | sigmask(SIGSTOP));
new_blocked = current->blocked;
switch (how) {
case SIG_BLOCK:
sigaddsetmask(&new_blocked, new_set);
break;
case SIG_UNBLOCK:
sigdelsetmask(&new_blocked, new_set);
break;
case SIG_SETMASK:
compat_sig_setmask(&new_blocked, new_set);
break;
default:
return -EINVAL;
}
set_current_blocked(&new_blocked);
}
if (oset) {
if (put_user(old_set, oset))
return -EFAULT;
}
return 0;
}
#endif
COMPAT_SYSCALL_DEFINE2(setrlimit, unsigned int, resource,
struct compat_rlimit __user *, rlim)
{
struct rlimit r;
if (!access_ok(VERIFY_READ, rlim, sizeof(*rlim)) ||
__get_user(r.rlim_cur, &rlim->rlim_cur) ||
__get_user(r.rlim_max, &rlim->rlim_max))
return -EFAULT;
if (r.rlim_cur == COMPAT_RLIM_INFINITY)
r.rlim_cur = RLIM_INFINITY;
if (r.rlim_max == COMPAT_RLIM_INFINITY)
r.rlim_max = RLIM_INFINITY;
return do_prlimit(current, resource, &r, NULL);
}
#ifdef COMPAT_RLIM_OLD_INFINITY
COMPAT_SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
struct compat_rlimit __user *, rlim)
{
struct rlimit r;
int ret;
mm_segment_t old_fs = get_fs();
set_fs(KERNEL_DS);
ret = sys_old_getrlimit(resource, (struct rlimit __user *)&r);
set_fs(old_fs);
if (!ret) {
if (r.rlim_cur > COMPAT_RLIM_OLD_INFINITY)
r.rlim_cur = COMPAT_RLIM_INFINITY;
if (r.rlim_max > COMPAT_RLIM_OLD_INFINITY)
r.rlim_max = COMPAT_RLIM_INFINITY;
if (!access_ok(VERIFY_WRITE, rlim, sizeof(*rlim)) ||
__put_user(r.rlim_cur, &rlim->rlim_cur) ||
__put_user(r.rlim_max, &rlim->rlim_max))
return -EFAULT;
}
return ret;
}
#endif
COMPAT_SYSCALL_DEFINE2(getrlimit, unsigned int, resource,
struct compat_rlimit __user *, rlim)
{
struct rlimit r;
int ret;
ret = do_prlimit(current, resource, NULL, &r);
if (!ret) {
if (r.rlim_cur > COMPAT_RLIM_INFINITY)
r.rlim_cur = COMPAT_RLIM_INFINITY;
if (r.rlim_max > COMPAT_RLIM_INFINITY)
r.rlim_max = COMPAT_RLIM_INFINITY;
if (!access_ok(VERIFY_WRITE, rlim, sizeof(*rlim)) ||
__put_user(r.rlim_cur, &rlim->rlim_cur) ||
__put_user(r.rlim_max, &rlim->rlim_max))
return -EFAULT;
}
return ret;
}
int put_compat_rusage(const struct rusage *r, struct compat_rusage __user *ru)
{
if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru)) ||
__put_user(r->ru_utime.tv_sec, &ru->ru_utime.tv_sec) ||
__put_user(r->ru_utime.tv_usec, &ru->ru_utime.tv_usec) ||
__put_user(r->ru_stime.tv_sec, &ru->ru_stime.tv_sec) ||
__put_user(r->ru_stime.tv_usec, &ru->ru_stime.tv_usec) ||
__put_user(r->ru_maxrss, &ru->ru_maxrss) ||
__put_user(r->ru_ixrss, &ru->ru_ixrss) ||
__put_user(r->ru_idrss, &ru->ru_idrss) ||
__put_user(r->ru_isrss, &ru->ru_isrss) ||
__put_user(r->ru_minflt, &ru->ru_minflt) ||
__put_user(r->ru_majflt, &ru->ru_majflt) ||
__put_user(r->ru_nswap, &ru->ru_nswap) ||
__put_user(r->ru_inblock, &ru->ru_inblock) ||
__put_user(r->ru_oublock, &ru->ru_oublock) ||
__put_user(r->ru_msgsnd, &ru->ru_msgsnd) ||
__put_user(r->ru_msgrcv, &ru->ru_msgrcv) ||
__put_user(r->ru_nsignals, &ru->ru_nsignals) ||
__put_user(r->ru_nvcsw, &ru->ru_nvcsw) ||
__put_user(r->ru_nivcsw, &ru->ru_nivcsw))
return -EFAULT;
return 0;
}
COMPAT_SYSCALL_DEFINE4(wait4,
compat_pid_t, pid,
compat_uint_t __user *, stat_addr,
int, options,
struct compat_rusage __user *, ru)
{
if (!ru) {
return sys_wait4(pid, stat_addr, options, NULL);
} else {
struct rusage r;
int ret;
unsigned int status;
mm_segment_t old_fs = get_fs();
set_fs (KERNEL_DS);
ret = sys_wait4(pid,
(stat_addr ?
(unsigned int __user *) &status : NULL),
options, (struct rusage __user *) &r);
set_fs (old_fs);
if (ret > 0) {
if (put_compat_rusage(&r, ru))
return -EFAULT;
if (stat_addr && put_user(status, stat_addr))
return -EFAULT;
}
return ret;
}
}
COMPAT_SYSCALL_DEFINE5(waitid,
int, which, compat_pid_t, pid,
struct compat_siginfo __user *, uinfo, int, options,
struct compat_rusage __user *, uru)
{
siginfo_t info;
struct rusage ru;
long ret;
mm_segment_t old_fs = get_fs();
memset(&info, 0, sizeof(info));
set_fs(KERNEL_DS);
ret = sys_waitid(which, pid, (siginfo_t __user *)&info, options,
uru ? (struct rusage __user *)&ru : NULL);
set_fs(old_fs);
if ((ret < 0) || (info.si_signo == 0))
return ret;
if (uru) {
/* sys_waitid() overwrites everything in ru */
if (COMPAT_USE_64BIT_TIME)
ret = copy_to_user(uru, &ru, sizeof(ru));
else
ret = put_compat_rusage(&ru, uru);
if (ret)
return -EFAULT;
}
BUG_ON(info.si_code & __SI_MASK);
info.si_code |= __SI_CHLD;
return copy_siginfo_to_user32(uinfo, &info);
}
static int compat_get_user_cpu_mask(compat_ulong_t __user *user_mask_ptr,
unsigned len, struct cpumask *new_mask)
{
unsigned long *k;
if (len < cpumask_size())
memset(new_mask, 0, cpumask_size());
else if (len > cpumask_size())
len = cpumask_size();
k = cpumask_bits(new_mask);
return compat_get_bitmap(k, user_mask_ptr, len * 8);
}
COMPAT_SYSCALL_DEFINE3(sched_setaffinity, compat_pid_t, pid,
unsigned int, len,
compat_ulong_t __user *, user_mask_ptr)
{
cpumask_var_t new_mask;
int retval;
if (!alloc_cpumask_var(&new_mask, GFP_KERNEL))
return -ENOMEM;
retval = compat_get_user_cpu_mask(user_mask_ptr, len, new_mask);
if (retval)
goto out;
retval = sched_setaffinity(pid, new_mask);
out:
free_cpumask_var(new_mask);
return retval;
}
COMPAT_SYSCALL_DEFINE3(sched_getaffinity, compat_pid_t, pid, unsigned int, len,
compat_ulong_t __user *, user_mask_ptr)
{
int ret;
cpumask_var_t mask;
cpumask: fix compat getaffinity Commit a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which abuses sched_getaffinity to find out NR_CPUS in order to parse /sys/devices/system/node/node*/cpumap. On NUMA systems with less than 32 possibly CPUs, the current compat_sys_sched_getaffinity now returns '4' instead of the actual NR_CPUS/8, which makes libnuma bail out when parsing the cpumap. The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean the libnuma expect the return value of sched_getaffinity() is either len argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids. Strictly speaking, userland requirement are 1) Glibc assume the return value mean the lengh of initialized of mask argument. E.g. if sched_getaffinity(1024) return 128, glibc make zero fill rest 896 byte. 2) Libnuma assume the return value can be used to guess NR_CPUS in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But it try len=4096 at first and 4096 is always bigger than NR_CPUS. Then, if we remove strange min_length normalization, we never hit -EINVAL case. sched_getaffinity() already solved this issue. This patch adapts compat_sys_sched_getaffinity() to match the non-compat case. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Ken Werner <ken.werner@web.de> Cc: stable@kernel.org Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-19 04:37:41 +04:00
if ((len * BITS_PER_BYTE) < nr_cpu_ids)
return -EINVAL;
if (len & (sizeof(compat_ulong_t)-1))
return -EINVAL;
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
return -ENOMEM;
ret = sched_getaffinity(pid, mask);
cpumask: fix compat getaffinity Commit a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which abuses sched_getaffinity to find out NR_CPUS in order to parse /sys/devices/system/node/node*/cpumap. On NUMA systems with less than 32 possibly CPUs, the current compat_sys_sched_getaffinity now returns '4' instead of the actual NR_CPUS/8, which makes libnuma bail out when parsing the cpumap. The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean the libnuma expect the return value of sched_getaffinity() is either len argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids. Strictly speaking, userland requirement are 1) Glibc assume the return value mean the lengh of initialized of mask argument. E.g. if sched_getaffinity(1024) return 128, glibc make zero fill rest 896 byte. 2) Libnuma assume the return value can be used to guess NR_CPUS in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But it try len=4096 at first and 4096 is always bigger than NR_CPUS. Then, if we remove strange min_length normalization, we never hit -EINVAL case. sched_getaffinity() already solved this issue. This patch adapts compat_sys_sched_getaffinity() to match the non-compat case. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Ken Werner <ken.werner@web.de> Cc: stable@kernel.org Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-19 04:37:41 +04:00
if (ret == 0) {
size_t retlen = min_t(size_t, len, cpumask_size());
cpumask: fix compat getaffinity Commit a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which abuses sched_getaffinity to find out NR_CPUS in order to parse /sys/devices/system/node/node*/cpumap. On NUMA systems with less than 32 possibly CPUs, the current compat_sys_sched_getaffinity now returns '4' instead of the actual NR_CPUS/8, which makes libnuma bail out when parsing the cpumap. The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean the libnuma expect the return value of sched_getaffinity() is either len argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids. Strictly speaking, userland requirement are 1) Glibc assume the return value mean the lengh of initialized of mask argument. E.g. if sched_getaffinity(1024) return 128, glibc make zero fill rest 896 byte. 2) Libnuma assume the return value can be used to guess NR_CPUS in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But it try len=4096 at first and 4096 is always bigger than NR_CPUS. Then, if we remove strange min_length normalization, we never hit -EINVAL case. sched_getaffinity() already solved this issue. This patch adapts compat_sys_sched_getaffinity() to match the non-compat case. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Ken Werner <ken.werner@web.de> Cc: stable@kernel.org Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-19 04:37:41 +04:00
if (compat_put_bitmap(user_mask_ptr, cpumask_bits(mask), retlen * 8))
ret = -EFAULT;
else
ret = retlen;
}
free_cpumask_var(mask);
cpumask: fix compat getaffinity Commit a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which abuses sched_getaffinity to find out NR_CPUS in order to parse /sys/devices/system/node/node*/cpumap. On NUMA systems with less than 32 possibly CPUs, the current compat_sys_sched_getaffinity now returns '4' instead of the actual NR_CPUS/8, which makes libnuma bail out when parsing the cpumap. The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean the libnuma expect the return value of sched_getaffinity() is either len argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids. Strictly speaking, userland requirement are 1) Glibc assume the return value mean the lengh of initialized of mask argument. E.g. if sched_getaffinity(1024) return 128, glibc make zero fill rest 896 byte. 2) Libnuma assume the return value can be used to guess NR_CPUS in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But it try len=4096 at first and 4096 is always bigger than NR_CPUS. Then, if we remove strange min_length normalization, we never hit -EINVAL case. sched_getaffinity() already solved this issue. This patch adapts compat_sys_sched_getaffinity() to match the non-compat case. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Ken Werner <ken.werner@web.de> Cc: stable@kernel.org Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-19 04:37:41 +04:00
return ret;
}
int get_compat_itimerspec(struct itimerspec *dst,
const struct compat_itimerspec __user *src)
{
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (__compat_get_timespec(&dst->it_interval, &src->it_interval) ||
__compat_get_timespec(&dst->it_value, &src->it_value))
return -EFAULT;
return 0;
}
int put_compat_itimerspec(struct compat_itimerspec __user *dst,
const struct itimerspec *src)
{
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (__compat_put_timespec(&src->it_interval, &dst->it_interval) ||
__compat_put_timespec(&src->it_value, &dst->it_value))
return -EFAULT;
return 0;
}
COMPAT_SYSCALL_DEFINE3(timer_create, clockid_t, which_clock,
struct compat_sigevent __user *, timer_event_spec,
timer_t __user *, created_timer_id)
{
struct sigevent __user *event = NULL;
if (timer_event_spec) {
struct sigevent kevent;
event = compat_alloc_user_space(sizeof(*event));
if (get_compat_sigevent(&kevent, timer_event_spec) ||
copy_to_user(event, &kevent, sizeof(*event)))
return -EFAULT;
}
return sys_timer_create(which_clock, event, created_timer_id);
}
COMPAT_SYSCALL_DEFINE4(timer_settime, timer_t, timer_id, int, flags,
struct compat_itimerspec __user *, new,
struct compat_itimerspec __user *, old)
{
long err;
mm_segment_t oldfs;
struct itimerspec newts, oldts;
if (!new)
return -EINVAL;
if (get_compat_itimerspec(&newts, new))
return -EFAULT;
oldfs = get_fs();
set_fs(KERNEL_DS);
err = sys_timer_settime(timer_id, flags,
(struct itimerspec __user *) &newts,
(struct itimerspec __user *) &oldts);
set_fs(oldfs);
if (!err && old && put_compat_itimerspec(old, &oldts))
return -EFAULT;
return err;
}
COMPAT_SYSCALL_DEFINE2(timer_gettime, timer_t, timer_id,
struct compat_itimerspec __user *, setting)
{
long err;
mm_segment_t oldfs;
struct itimerspec ts;
oldfs = get_fs();
set_fs(KERNEL_DS);
err = sys_timer_gettime(timer_id,
(struct itimerspec __user *) &ts);
set_fs(oldfs);
if (!err && put_compat_itimerspec(setting, &ts))
return -EFAULT;
return err;
}
COMPAT_SYSCALL_DEFINE2(clock_settime, clockid_t, which_clock,
struct compat_timespec __user *, tp)
{
long err;
mm_segment_t oldfs;
struct timespec ts;
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (compat_get_timespec(&ts, tp))
return -EFAULT;
oldfs = get_fs();
set_fs(KERNEL_DS);
err = sys_clock_settime(which_clock,
(struct timespec __user *) &ts);
set_fs(oldfs);
return err;
}
COMPAT_SYSCALL_DEFINE2(clock_gettime, clockid_t, which_clock,
struct compat_timespec __user *, tp)
{
long err;
mm_segment_t oldfs;
struct timespec ts;
oldfs = get_fs();
set_fs(KERNEL_DS);
err = sys_clock_gettime(which_clock,
(struct timespec __user *) &ts);
set_fs(oldfs);
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (!err && compat_put_timespec(&ts, tp))
return -EFAULT;
return err;
}
COMPAT_SYSCALL_DEFINE2(clock_adjtime, clockid_t, which_clock,
struct compat_timex __user *, utp)
{
struct timex txc;
mm_segment_t oldfs;
int err, ret;
err = compat_get_timex(&txc, utp);
if (err)
return err;
oldfs = get_fs();
set_fs(KERNEL_DS);
ret = sys_clock_adjtime(which_clock, (struct timex __user *) &txc);
set_fs(oldfs);
err = compat_put_timex(utp, &txc);
if (err)
return err;
return ret;
}
COMPAT_SYSCALL_DEFINE2(clock_getres, clockid_t, which_clock,
struct compat_timespec __user *, tp)
{
long err;
mm_segment_t oldfs;
struct timespec ts;
oldfs = get_fs();
set_fs(KERNEL_DS);
err = sys_clock_getres(which_clock,
(struct timespec __user *) &ts);
set_fs(oldfs);
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (!err && tp && compat_put_timespec(&ts, tp))
return -EFAULT;
return err;
}
static long compat_clock_nanosleep_restart(struct restart_block *restart)
{
long err;
mm_segment_t oldfs;
struct timespec tu;
struct compat_timespec __user *rmtp = restart->nanosleep.compat_rmtp;
restart->nanosleep.rmtp = (struct timespec __user *) &tu;
oldfs = get_fs();
set_fs(KERNEL_DS);
err = clock_nanosleep_restart(restart);
set_fs(oldfs);
if ((err == -ERESTART_RESTARTBLOCK) && rmtp &&
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
compat_put_timespec(&tu, rmtp))
return -EFAULT;
if (err == -ERESTART_RESTARTBLOCK) {
restart->fn = compat_clock_nanosleep_restart;
restart->nanosleep.compat_rmtp = rmtp;
}
return err;
}
COMPAT_SYSCALL_DEFINE4(clock_nanosleep, clockid_t, which_clock, int, flags,
struct compat_timespec __user *, rqtp,
struct compat_timespec __user *, rmtp)
{
long err;
mm_segment_t oldfs;
struct timespec in, out;
struct restart_block *restart;
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (compat_get_timespec(&in, rqtp))
return -EFAULT;
oldfs = get_fs();
set_fs(KERNEL_DS);
err = sys_clock_nanosleep(which_clock, flags,
(struct timespec __user *) &in,
(struct timespec __user *) &out);
set_fs(oldfs);
if ((err == -ERESTART_RESTARTBLOCK) && rmtp &&
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
compat_put_timespec(&out, rmtp))
return -EFAULT;
if (err == -ERESTART_RESTARTBLOCK) {
all arches, signal: move restart_block to struct task_struct If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: Richard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 02:01:14 +03:00
restart = &current->restart_block;
restart->fn = compat_clock_nanosleep_restart;
restart->nanosleep.compat_rmtp = rmtp;
}
return err;
}
/*
* We currently only need the following fields from the sigevent
* structure: sigev_value, sigev_signo, sig_notify and (sometimes
* sigev_notify_thread_id). The others are handled in user mode.
* We also assume that copying sigev_value.sival_int is sufficient
* to keep all the bits of sigev_value.sival_ptr intact.
*/
int get_compat_sigevent(struct sigevent *event,
const struct compat_sigevent __user *u_event)
{
memset(event, 0, sizeof(*event));
return (!access_ok(VERIFY_READ, u_event, sizeof(*u_event)) ||
__get_user(event->sigev_value.sival_int,
&u_event->sigev_value.sival_int) ||
__get_user(event->sigev_signo, &u_event->sigev_signo) ||
__get_user(event->sigev_notify, &u_event->sigev_notify) ||
__get_user(event->sigev_notify_thread_id,
&u_event->sigev_notify_thread_id))
? -EFAULT : 0;
}
long compat_get_bitmap(unsigned long *mask, const compat_ulong_t __user *umask,
unsigned long bitmap_size)
{
int i, j;
unsigned long m;
compat_ulong_t um;
unsigned long nr_compat_longs;
/* align bitmap up to nearest compat_long_t boundary */
bitmap_size = ALIGN(bitmap_size, BITS_PER_COMPAT_LONG);
if (!access_ok(VERIFY_READ, umask, bitmap_size / 8))
return -EFAULT;
nr_compat_longs = BITS_TO_COMPAT_LONGS(bitmap_size);
for (i = 0; i < BITS_TO_LONGS(bitmap_size); i++) {
m = 0;
for (j = 0; j < sizeof(m)/sizeof(um); j++) {
/*
* We dont want to read past the end of the userspace
* bitmap. We must however ensure the end of the
* kernel bitmap is zeroed.
*/
if (nr_compat_longs) {
nr_compat_longs--;
if (__get_user(um, umask))
return -EFAULT;
} else {
um = 0;
}
umask++;
m |= (long)um << (j * BITS_PER_COMPAT_LONG);
}
*mask++ = m;
}
return 0;
}
long compat_put_bitmap(compat_ulong_t __user *umask, unsigned long *mask,
unsigned long bitmap_size)
{
int i, j;
unsigned long m;
compat_ulong_t um;
unsigned long nr_compat_longs;
/* align bitmap up to nearest compat_long_t boundary */
bitmap_size = ALIGN(bitmap_size, BITS_PER_COMPAT_LONG);
if (!access_ok(VERIFY_WRITE, umask, bitmap_size / 8))
return -EFAULT;
nr_compat_longs = BITS_TO_COMPAT_LONGS(bitmap_size);
for (i = 0; i < BITS_TO_LONGS(bitmap_size); i++) {
m = *mask++;
for (j = 0; j < sizeof(m)/sizeof(um); j++) {
um = m;
/*
* We dont want to write past the end of the userspace
* bitmap.
*/
if (nr_compat_longs) {
nr_compat_longs--;
if (__put_user(um, umask))
return -EFAULT;
}
umask++;
m >>= 4*sizeof(um);
m >>= 4*sizeof(um);
}
}
return 0;
}
void
sigset_from_compat(sigset_t *set, const compat_sigset_t *compat)
{
switch (_NSIG_WORDS) {
case 4: set->sig[3] = compat->sig[6] | (((long)compat->sig[7]) << 32 );
case 3: set->sig[2] = compat->sig[4] | (((long)compat->sig[5]) << 32 );
case 2: set->sig[1] = compat->sig[2] | (((long)compat->sig[3]) << 32 );
case 1: set->sig[0] = compat->sig[0] | (((long)compat->sig[1]) << 32 );
}
}
EXPORT_SYMBOL_GPL(sigset_from_compat);
void
sigset_to_compat(compat_sigset_t *compat, const sigset_t *set)
{
switch (_NSIG_WORDS) {
case 4: compat->sig[7] = (set->sig[3] >> 32); compat->sig[6] = set->sig[3];
case 3: compat->sig[5] = (set->sig[2] >> 32); compat->sig[4] = set->sig[2];
case 2: compat->sig[3] = (set->sig[1] >> 32); compat->sig[2] = set->sig[1];
case 1: compat->sig[1] = (set->sig[0] >> 32); compat->sig[0] = set->sig[0];
}
}
COMPAT_SYSCALL_DEFINE4(rt_sigtimedwait, compat_sigset_t __user *, uthese,
struct compat_siginfo __user *, uinfo,
struct compat_timespec __user *, uts, compat_size_t, sigsetsize)
{
compat_sigset_t s32;
sigset_t s;
struct timespec t;
siginfo_t info;
long ret;
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&s32, uthese, sizeof(compat_sigset_t)))
return -EFAULT;
sigset_from_compat(&s, &s32);
if (uts) {
if (compat_get_timespec(&t, uts))
return -EFAULT;
}
ret = do_sigtimedwait(&s, &info, uts ? &t : NULL);
if (ret > 0 && uinfo) {
if (copy_siginfo_to_user32(uinfo, &info))
ret = -EFAULT;
}
return ret;
}
#ifdef __ARCH_WANT_COMPAT_SYS_TIME
/* compat_time_t is a 32 bit "long" and needs to get converted. */
COMPAT_SYSCALL_DEFINE1(time, compat_time_t __user *, tloc)
{
compat_time_t i;
struct timeval tv;
do_gettimeofday(&tv);
i = tv.tv_sec;
if (tloc) {
if (put_user(i,tloc))
Allow times and time system calls to return small negative values At the moment, the times() system call will appear to fail for a period shortly after boot, while the value it want to return is between -4095 and -1. The same thing will also happen for the time() system call on 32-bit platforms some time in 2106 or so. On some platforms, such as x86, this is unavoidable because of the system call ABI, but other platforms such as powerpc have a separate error indication from the return value, so system calls can in fact return small negative values without indicating an error. On those platforms, force_successful_syscall_return() provides a way to indicate that the system call return value should not be treated as an error even if it is in the range which would normally be taken as a negative error number. This adds a force_successful_syscall_return() call to the time() and times() system calls plus their 32-bit compat versions, so that they don't erroneously indicate an error on those platforms whose system call ABI has a separate error indication. This will not affect anything on other platforms. Joakim Tjernlund added the fix for time() and the compat versions of time() and times(), after I did the fix for times(). Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:41:02 +03:00
return -EFAULT;
}
Allow times and time system calls to return small negative values At the moment, the times() system call will appear to fail for a period shortly after boot, while the value it want to return is between -4095 and -1. The same thing will also happen for the time() system call on 32-bit platforms some time in 2106 or so. On some platforms, such as x86, this is unavoidable because of the system call ABI, but other platforms such as powerpc have a separate error indication from the return value, so system calls can in fact return small negative values without indicating an error. On those platforms, force_successful_syscall_return() provides a way to indicate that the system call return value should not be treated as an error even if it is in the range which would normally be taken as a negative error number. This adds a force_successful_syscall_return() call to the time() and times() system calls plus their 32-bit compat versions, so that they don't erroneously indicate an error on those platforms whose system call ABI has a separate error indication. This will not affect anything on other platforms. Joakim Tjernlund added the fix for time() and the compat versions of time() and times(), after I did the fix for times(). Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:41:02 +03:00
force_successful_syscall_return();
return i;
}
COMPAT_SYSCALL_DEFINE1(stime, compat_time_t __user *, tptr)
{
struct timespec tv;
int err;
if (get_user(tv.tv_sec, tptr))
return -EFAULT;
tv.tv_nsec = 0;
err = security_settime(&tv, NULL);
if (err)
return err;
do_settimeofday(&tv);
return 0;
}
#endif /* __ARCH_WANT_COMPAT_SYS_TIME */
COMPAT_SYSCALL_DEFINE1(adjtimex, struct compat_timex __user *, utp)
{
struct timex txc;
int err, ret;
err = compat_get_timex(&txc, utp);
if (err)
return err;
ret = do_adjtimex(&txc);
err = compat_put_timex(utp, &txc);
if (err)
return err;
return ret;
}
#ifdef CONFIG_NUMA
COMPAT_SYSCALL_DEFINE6(move_pages, pid_t, pid, compat_ulong_t, nr_pages,
compat_uptr_t __user *, pages32,
const int __user *, nodes,
int __user *, status,
int, flags)
{
const void __user * __user *pages;
int i;
pages = compat_alloc_user_space(nr_pages * sizeof(void *));
for (i = 0; i < nr_pages; i++) {
compat_uptr_t p;
if (get_user(p, pages32 + i) ||
put_user(compat_ptr(p), pages + i))
return -EFAULT;
}
return sys_move_pages(pid, nr_pages, pages, nodes, status, flags);
}
COMPAT_SYSCALL_DEFINE4(migrate_pages, compat_pid_t, pid,
compat_ulong_t, maxnode,
const compat_ulong_t __user *, old_nodes,
const compat_ulong_t __user *, new_nodes)
{
unsigned long __user *old = NULL;
unsigned long __user *new = NULL;
nodemask_t tmp_mask;
unsigned long nr_bits;
unsigned long size;
nr_bits = min_t(unsigned long, maxnode - 1, MAX_NUMNODES);
size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
if (old_nodes) {
if (compat_get_bitmap(nodes_addr(tmp_mask), old_nodes, nr_bits))
return -EFAULT;
old = compat_alloc_user_space(new_nodes ? size * 2 : size);
if (new_nodes)
new = old + size / sizeof(unsigned long);
if (copy_to_user(old, nodes_addr(tmp_mask), size))
return -EFAULT;
}
if (new_nodes) {
if (compat_get_bitmap(nodes_addr(tmp_mask), new_nodes, nr_bits))
return -EFAULT;
if (new == NULL)
new = compat_alloc_user_space(size);
if (copy_to_user(new, nodes_addr(tmp_mask), size))
return -EFAULT;
}
return sys_migrate_pages(pid, nr_bits + 1, old, new);
}
#endif
COMPAT_SYSCALL_DEFINE2(sched_rr_get_interval,
compat_pid_t, pid,
struct compat_timespec __user *, interval)
{
struct timespec t;
int ret;
mm_segment_t old_fs = get_fs();
set_fs(KERNEL_DS);
ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t);
set_fs(old_fs);
compat: Get rid of (get|put)_compat_time(val|spec) We have two APIs for compatiblity timespec/val, with confusingly similar names. compat_(get|put)_time(val|spec) *do* handle the case where COMPAT_USE_64BIT_TIME is set, whereas (get|put)_compat_time(val|spec) do not. This is an accident waiting to happen. Clean it up by favoring the full-service version; the limited version is replaced with double-underscore versions static to kernel/compat.c. A common pattern is to convert a struct timespec to kernel format in an allocation on the user stack. Unfortunately it is open-coded in several places. Since this allocation isn't actually needed if COMPAT_USE_64BIT_TIME is true (since user format == kernel format) encapsulate that whole pattern into the function compat_convert_timespec(). An equivalent function should be written for struct timeval if it is needed in the future. Finally, get rid of compat_(get|put)_timeval_convert(): each was only used once, and the latter was not even doing what the function said (no conversion actually was being done.) Moving the conversion into compat_sys_settimeofday() itself makes the code much more similar to sys_settimeofday() itself. v3: Remove unused compat_convert_timeval(). v2: Drop bogus "const" in the destination argument for compat_convert_time*(). Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-02-02 06:54:11 +04:00
if (compat_put_timespec(&t, interval))
return -EFAULT;
return ret;
}
compat: Make compat_alloc_user_space() incorporate the access_ok() compat_alloc_user_space() expects the caller to independently call access_ok() to verify the returned area. A missing call could introduce problems on some architectures. This patch incorporates the access_ok() check into compat_alloc_user_space() and also adds a sanity check on the length. The existing compat_alloc_user_space() implementations are renamed arch_compat_alloc_user_space() and are used as part of the implementation of the new global function. This patch assumes NULL will cause __get_user()/__put_user() to either fail or access userspace on all architectures. This should be followed by checking the return value of compat_access_user_space() for NULL in the callers, at which time the access_ok() in the callers can also be removed. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@kernel.org>
2010-09-08 03:16:18 +04:00
/*
* Allocate user-space memory for the duration of a single system call,
* in order to marshall parameters inside a compat thunk.
*/
void __user *compat_alloc_user_space(unsigned long len)
{
void __user *ptr;
/* If len would occupy more than half of the entire compat space... */
if (unlikely(len > (((compat_uptr_t)~0) >> 1)))
return NULL;
ptr = arch_compat_alloc_user_space(len);
if (unlikely(!access_ok(VERIFY_WRITE, ptr, len)))
return NULL;
return ptr;
}
EXPORT_SYMBOL_GPL(compat_alloc_user_space);