WSL2-Linux-Kernel/drivers/rtc/rtc-ds1553.c

364 строки
10 KiB
C
Исходник Обычный вид История

/*
* An rtc driver for the Dallas DS1553
*
* Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bcd.h>
#include <linux/init.h>
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/module.h>
#define DRV_VERSION "0.3"
#define RTC_REG_SIZE 0x2000
#define RTC_OFFSET 0x1ff0
#define RTC_FLAGS (RTC_OFFSET + 0)
#define RTC_SECONDS_ALARM (RTC_OFFSET + 2)
#define RTC_MINUTES_ALARM (RTC_OFFSET + 3)
#define RTC_HOURS_ALARM (RTC_OFFSET + 4)
#define RTC_DATE_ALARM (RTC_OFFSET + 5)
#define RTC_INTERRUPTS (RTC_OFFSET + 6)
#define RTC_WATCHDOG (RTC_OFFSET + 7)
#define RTC_CONTROL (RTC_OFFSET + 8)
#define RTC_CENTURY (RTC_OFFSET + 8)
#define RTC_SECONDS (RTC_OFFSET + 9)
#define RTC_MINUTES (RTC_OFFSET + 10)
#define RTC_HOURS (RTC_OFFSET + 11)
#define RTC_DAY (RTC_OFFSET + 12)
#define RTC_DATE (RTC_OFFSET + 13)
#define RTC_MONTH (RTC_OFFSET + 14)
#define RTC_YEAR (RTC_OFFSET + 15)
#define RTC_CENTURY_MASK 0x3f
#define RTC_SECONDS_MASK 0x7f
#define RTC_DAY_MASK 0x07
/* Bits in the Control/Century register */
#define RTC_WRITE 0x80
#define RTC_READ 0x40
/* Bits in the Seconds register */
#define RTC_STOP 0x80
/* Bits in the Flags register */
#define RTC_FLAGS_AF 0x40
#define RTC_FLAGS_BLF 0x10
/* Bits in the Interrupts register */
#define RTC_INTS_AE 0x80
struct rtc_plat_data {
struct rtc_device *rtc;
void __iomem *ioaddr;
unsigned long last_jiffies;
int irq;
unsigned int irqen;
int alrm_sec;
int alrm_min;
int alrm_hour;
int alrm_mday;
spinlock_t lock;
};
static int ds1553_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
u8 century;
century = bin2bcd((tm->tm_year + 1900) / 100);
writeb(RTC_WRITE, pdata->ioaddr + RTC_CONTROL);
writeb(bin2bcd(tm->tm_year % 100), ioaddr + RTC_YEAR);
writeb(bin2bcd(tm->tm_mon + 1), ioaddr + RTC_MONTH);
writeb(bin2bcd(tm->tm_wday) & RTC_DAY_MASK, ioaddr + RTC_DAY);
writeb(bin2bcd(tm->tm_mday), ioaddr + RTC_DATE);
writeb(bin2bcd(tm->tm_hour), ioaddr + RTC_HOURS);
writeb(bin2bcd(tm->tm_min), ioaddr + RTC_MINUTES);
writeb(bin2bcd(tm->tm_sec) & RTC_SECONDS_MASK, ioaddr + RTC_SECONDS);
/* RTC_CENTURY and RTC_CONTROL share same register */
writeb(RTC_WRITE | (century & RTC_CENTURY_MASK), ioaddr + RTC_CENTURY);
writeb(century & RTC_CENTURY_MASK, ioaddr + RTC_CONTROL);
return 0;
}
static int ds1553_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
unsigned int year, month, day, hour, minute, second, week;
unsigned int century;
/* give enough time to update RTC in case of continuous read */
if (pdata->last_jiffies == jiffies)
msleep(1);
pdata->last_jiffies = jiffies;
writeb(RTC_READ, ioaddr + RTC_CONTROL);
second = readb(ioaddr + RTC_SECONDS) & RTC_SECONDS_MASK;
minute = readb(ioaddr + RTC_MINUTES);
hour = readb(ioaddr + RTC_HOURS);
day = readb(ioaddr + RTC_DATE);
week = readb(ioaddr + RTC_DAY) & RTC_DAY_MASK;
month = readb(ioaddr + RTC_MONTH);
year = readb(ioaddr + RTC_YEAR);
century = readb(ioaddr + RTC_CENTURY) & RTC_CENTURY_MASK;
writeb(0, ioaddr + RTC_CONTROL);
tm->tm_sec = bcd2bin(second);
tm->tm_min = bcd2bin(minute);
tm->tm_hour = bcd2bin(hour);
tm->tm_mday = bcd2bin(day);
tm->tm_wday = bcd2bin(week);
tm->tm_mon = bcd2bin(month) - 1;
/* year is 1900 + tm->tm_year */
tm->tm_year = bcd2bin(year) + bcd2bin(century) * 100 - 1900;
if (rtc_valid_tm(tm) < 0) {
dev_err(dev, "retrieved date/time is not valid.\n");
rtc_time_to_tm(0, tm);
}
return 0;
}
static void ds1553_rtc_update_alarm(struct rtc_plat_data *pdata)
{
void __iomem *ioaddr = pdata->ioaddr;
unsigned long flags;
spin_lock_irqsave(&pdata->lock, flags);
writeb(pdata->alrm_mday < 0 || (pdata->irqen & RTC_UF) ?
0x80 : bin2bcd(pdata->alrm_mday),
ioaddr + RTC_DATE_ALARM);
writeb(pdata->alrm_hour < 0 || (pdata->irqen & RTC_UF) ?
0x80 : bin2bcd(pdata->alrm_hour),
ioaddr + RTC_HOURS_ALARM);
writeb(pdata->alrm_min < 0 || (pdata->irqen & RTC_UF) ?
0x80 : bin2bcd(pdata->alrm_min),
ioaddr + RTC_MINUTES_ALARM);
writeb(pdata->alrm_sec < 0 || (pdata->irqen & RTC_UF) ?
0x80 : bin2bcd(pdata->alrm_sec),
ioaddr + RTC_SECONDS_ALARM);
writeb(pdata->irqen ? RTC_INTS_AE : 0, ioaddr + RTC_INTERRUPTS);
readb(ioaddr + RTC_FLAGS); /* clear interrupts */
spin_unlock_irqrestore(&pdata->lock, flags);
}
static int ds1553_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
if (pdata->irq <= 0)
return -EINVAL;
pdata->alrm_mday = alrm->time.tm_mday;
pdata->alrm_hour = alrm->time.tm_hour;
pdata->alrm_min = alrm->time.tm_min;
pdata->alrm_sec = alrm->time.tm_sec;
if (alrm->enabled)
pdata->irqen |= RTC_AF;
ds1553_rtc_update_alarm(pdata);
return 0;
}
static int ds1553_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
if (pdata->irq <= 0)
return -EINVAL;
alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday;
alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour;
alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min;
alrm->time.tm_sec = pdata->alrm_sec < 0 ? 0 : pdata->alrm_sec;
alrm->enabled = (pdata->irqen & RTC_AF) ? 1 : 0;
return 0;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
static irqreturn_t ds1553_rtc_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
unsigned long events = 0;
spin_lock(&pdata->lock);
/* read and clear interrupt */
if (readb(ioaddr + RTC_FLAGS) & RTC_FLAGS_AF) {
events = RTC_IRQF;
if (readb(ioaddr + RTC_SECONDS_ALARM) & 0x80)
events |= RTC_UF;
else
events |= RTC_AF;
rtc_update_irq(pdata->rtc, 1, events);
}
spin_unlock(&pdata->lock);
return events ? IRQ_HANDLED : IRQ_NONE;
}
static int ds1553_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
if (pdata->irq <= 0)
return -EINVAL;
if (enabled)
pdata->irqen |= RTC_AF;
else
pdata->irqen &= ~RTC_AF;
ds1553_rtc_update_alarm(pdata);
return 0;
}
static const struct rtc_class_ops ds1553_rtc_ops = {
.read_time = ds1553_rtc_read_time,
.set_time = ds1553_rtc_set_time,
.read_alarm = ds1553_rtc_read_alarm,
.set_alarm = ds1553_rtc_set_alarm,
.alarm_irq_enable = ds1553_rtc_alarm_irq_enable,
};
static ssize_t ds1553_nvram_read(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 09:57:22 +04:00
struct bin_attribute *bin_attr,
char *buf, loff_t pos, size_t size)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
ssize_t count;
for (count = 0; size > 0 && pos < RTC_OFFSET; count++, size--)
*buf++ = readb(ioaddr + pos++);
return count;
}
static ssize_t ds1553_nvram_write(struct file *filp, struct kobject *kobj,
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 09:57:22 +04:00
struct bin_attribute *bin_attr,
char *buf, loff_t pos, size_t size)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
ssize_t count;
for (count = 0; size > 0 && pos < RTC_OFFSET; count++, size--)
writeb(*buf++, ioaddr + pos++);
return count;
}
static struct bin_attribute ds1553_nvram_attr = {
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUSR,
},
.size = RTC_OFFSET,
.read = ds1553_nvram_read,
.write = ds1553_nvram_write,
};
static int ds1553_rtc_probe(struct platform_device *pdev)
{
struct resource *res;
unsigned int cen, sec;
struct rtc_plat_data *pdata;
void __iomem *ioaddr;
int ret = 0;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ioaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ioaddr))
return PTR_ERR(ioaddr);
pdata->ioaddr = ioaddr;
pdata->irq = platform_get_irq(pdev, 0);
/* turn RTC on if it was not on */
sec = readb(ioaddr + RTC_SECONDS);
if (sec & RTC_STOP) {
sec &= RTC_SECONDS_MASK;
cen = readb(ioaddr + RTC_CENTURY) & RTC_CENTURY_MASK;
writeb(RTC_WRITE, ioaddr + RTC_CONTROL);
writeb(sec, ioaddr + RTC_SECONDS);
writeb(cen & RTC_CENTURY_MASK, ioaddr + RTC_CONTROL);
}
if (readb(ioaddr + RTC_FLAGS) & RTC_FLAGS_BLF)
dev_warn(&pdev->dev, "voltage-low detected.\n");
spin_lock_init(&pdata->lock);
pdata->last_jiffies = jiffies;
platform_set_drvdata(pdev, pdata);
pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
&ds1553_rtc_ops, THIS_MODULE);
if (IS_ERR(pdata->rtc))
return PTR_ERR(pdata->rtc);
if (pdata->irq > 0) {
writeb(0, ioaddr + RTC_INTERRUPTS);
if (devm_request_irq(&pdev->dev, pdata->irq,
ds1553_rtc_interrupt,
0, pdev->name, pdev) < 0) {
dev_warn(&pdev->dev, "interrupt not available.\n");
pdata->irq = 0;
}
}
ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1553_nvram_attr);
if (ret)
dev_err(&pdev->dev, "unable to create sysfs file: %s\n",
ds1553_nvram_attr.attr.name);
return 0;
}
static int ds1553_rtc_remove(struct platform_device *pdev)
{
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
sysfs_remove_bin_file(&pdev->dev.kobj, &ds1553_nvram_attr);
if (pdata->irq > 0)
writeb(0, pdata->ioaddr + RTC_INTERRUPTS);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:rtc-ds1553");
static struct platform_driver ds1553_rtc_driver = {
.probe = ds1553_rtc_probe,
.remove = ds1553_rtc_remove,
.driver = {
.name = "rtc-ds1553",
.owner = THIS_MODULE,
},
};
module_platform_driver(ds1553_rtc_driver);
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
MODULE_DESCRIPTION("Dallas DS1553 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);