WSL2-Linux-Kernel/mm/vmscan.c

2901 строка
80 KiB
C
Исходник Обычный вид История

/*
* linux/mm/vmscan.c
*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* Swap reorganised 29.12.95, Stephen Tweedie.
* kswapd added: 7.1.96 sct
* Removed kswapd_ctl limits, and swap out as many pages as needed
* to bring the system back to freepages.high: 2.4.97, Rik van Riel.
* Zone aware kswapd started 02/00, Kanoj Sarcar (kanoj@sgi.com).
* Multiqueue VM started 5.8.00, Rik van Riel.
*/
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/kernel_stat.h>
#include <linux/swap.h>
#include <linux/pagemap.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/vmstat.h>
#include <linux/file.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/buffer_head.h> /* for try_to_release_page(),
buffer_heads_over_limit */
#include <linux/mm_inline.h>
#include <linux/pagevec.h>
#include <linux/backing-dev.h>
#include <linux/rmap.h>
#include <linux/topology.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
#include <linux/notifier.h>
#include <linux/rwsem.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/memcontrol.h>
per-task-delay-accounting: add memory reclaim delay Sometimes, application responses become bad under heavy memory load. Applications take a bit time to reclaim memory. The statistics, how long memory reclaim takes, will be useful to measure memory usage. This patch adds accounting memory reclaim to per-task-delay-accounting for accounting the time of do_try_to_free_pages(). <i.e> - When System is under low memory load, memory reclaim may not occur. $ free total used free shared buffers cached Mem: 8197800 1577300 6620500 0 4808 1516724 -/+ buffers/cache: 55768 8142032 Swap: 16386292 0 16386292 $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 5069748 10612 3014060 0 0 0 0 3 26 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 4 22 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 3 18 0 0 100 0 Measure the time of tar command. $ ls -s test.dat 1501472 test.dat $ time tar cvf test.tar test.dat real 0m13.388s user 0m0.116s sys 0m5.304s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 428 5528345500 5477116080 62749891 IO count delay total 338 8078977189 SWAP count delay total 0 0 RECLAIM count delay total 0 0 - When system is under heavy memory load memory reclaim may occur. $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 7159032 49724 1812 3012 0 0 0 0 3 24 0 0 100 0 0 0 7159032 49724 1812 3012 0 0 0 0 4 24 0 0 100 0 0 0 7159032 49848 1812 3012 0 0 0 0 3 22 0 0 100 0 In this case, one process uses more 8G memory by execution of malloc() and memset(). $ time tar cvf test.tar test.dat real 1m38.563s <- increased by 85 sec user 0m0.140s sys 0m7.060s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 9021 7140446250 7315277975 923201824 IO count delay total 8965 90466349669 SWAP count delay total 3 21036367 RECLAIM count delay total 740 61011951153 In the later case, the value of RECLAIM is increasing. So, taskstats can show how much memory reclaim influences TAT. Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:48:52 +04:00
#include <linux/delayacct.h>
#include <linux/sysctl.h>
#include <asm/tlbflush.h>
#include <asm/div64.h>
#include <linux/swapops.h>
#include "internal.h"
struct scan_control {
/* Incremented by the number of inactive pages that were scanned */
unsigned long nr_scanned;
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
/* Number of pages freed so far during a call to shrink_zones() */
unsigned long nr_reclaimed;
/* How many pages shrink_list() should reclaim */
unsigned long nr_to_reclaim;
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
unsigned long hibernation_mode;
/* This context's GFP mask */
gfp_t gfp_mask;
int may_writepage;
/* Can mapped pages be reclaimed? */
int may_unmap;
/* Can pages be swapped as part of reclaim? */
int may_swap;
int swappiness;
int all_unreclaimable;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
int order;
/* Which cgroup do we reclaim from */
struct mem_cgroup *mem_cgroup;
/*
* Nodemask of nodes allowed by the caller. If NULL, all nodes
* are scanned.
*/
nodemask_t *nodemask;
/* Pluggable isolate pages callback */
unsigned long (*isolate_pages)(unsigned long nr, struct list_head *dst,
unsigned long *scanned, int order, int mode,
struct zone *z, struct mem_cgroup *mem_cont,
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
int active, int file);
};
#define lru_to_page(_head) (list_entry((_head)->prev, struct page, lru))
#ifdef ARCH_HAS_PREFETCH
#define prefetch_prev_lru_page(_page, _base, _field) \
do { \
if ((_page)->lru.prev != _base) { \
struct page *prev; \
\
prev = lru_to_page(&(_page->lru)); \
prefetch(&prev->_field); \
} \
} while (0)
#else
#define prefetch_prev_lru_page(_page, _base, _field) do { } while (0)
#endif
#ifdef ARCH_HAS_PREFETCHW
#define prefetchw_prev_lru_page(_page, _base, _field) \
do { \
if ((_page)->lru.prev != _base) { \
struct page *prev; \
\
prev = lru_to_page(&(_page->lru)); \
prefetchw(&prev->_field); \
} \
} while (0)
#else
#define prefetchw_prev_lru_page(_page, _base, _field) do { } while (0)
#endif
/*
* From 0 .. 100. Higher means more swappy.
*/
int vm_swappiness = 60;
long vm_total_pages; /* The total number of pages which the VM controls */
static LIST_HEAD(shrinker_list);
static DECLARE_RWSEM(shrinker_rwsem);
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
#define scanning_global_lru(sc) (!(sc)->mem_cgroup)
#else
#define scanning_global_lru(sc) (1)
#endif
static struct zone_reclaim_stat *get_reclaim_stat(struct zone *zone,
struct scan_control *sc)
{
if (!scanning_global_lru(sc))
return mem_cgroup_get_reclaim_stat(sc->mem_cgroup, zone);
return &zone->reclaim_stat;
}
static unsigned long zone_nr_lru_pages(struct zone *zone,
struct scan_control *sc, enum lru_list lru)
{
if (!scanning_global_lru(sc))
return mem_cgroup_zone_nr_pages(sc->mem_cgroup, zone, lru);
return zone_page_state(zone, NR_LRU_BASE + lru);
}
/*
* Add a shrinker callback to be called from the vm
*/
void register_shrinker(struct shrinker *shrinker)
{
shrinker->nr = 0;
down_write(&shrinker_rwsem);
list_add_tail(&shrinker->list, &shrinker_list);
up_write(&shrinker_rwsem);
}
EXPORT_SYMBOL(register_shrinker);
/*
* Remove one
*/
void unregister_shrinker(struct shrinker *shrinker)
{
down_write(&shrinker_rwsem);
list_del(&shrinker->list);
up_write(&shrinker_rwsem);
}
EXPORT_SYMBOL(unregister_shrinker);
#define SHRINK_BATCH 128
/*
* Call the shrink functions to age shrinkable caches
*
* Here we assume it costs one seek to replace a lru page and that it also
* takes a seek to recreate a cache object. With this in mind we age equal
* percentages of the lru and ageable caches. This should balance the seeks
* generated by these structures.
*
* If the vm encountered mapped pages on the LRU it increase the pressure on
* slab to avoid swapping.
*
* We do weird things to avoid (scanned*seeks*entries) overflowing 32 bits.
*
* `lru_pages' represents the number of on-LRU pages in all the zones which
* are eligible for the caller's allocation attempt. It is used for balancing
* slab reclaim versus page reclaim.
*
* Returns the number of slab objects which we shrunk.
*/
unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask,
unsigned long lru_pages)
{
struct shrinker *shrinker;
unsigned long ret = 0;
if (scanned == 0)
scanned = SWAP_CLUSTER_MAX;
if (!down_read_trylock(&shrinker_rwsem))
return 1; /* Assume we'll be able to shrink next time */
list_for_each_entry(shrinker, &shrinker_list, list) {
unsigned long long delta;
unsigned long total_scan;
unsigned long max_pass = (*shrinker->shrink)(0, gfp_mask);
delta = (4 * scanned) / shrinker->seeks;
delta *= max_pass;
do_div(delta, lru_pages + 1);
shrinker->nr += delta;
if (shrinker->nr < 0) {
printk(KERN_ERR "shrink_slab: %pF negative objects to "
"delete nr=%ld\n",
shrinker->shrink, shrinker->nr);
shrinker->nr = max_pass;
}
/*
* Avoid risking looping forever due to too large nr value:
* never try to free more than twice the estimate number of
* freeable entries.
*/
if (shrinker->nr > max_pass * 2)
shrinker->nr = max_pass * 2;
total_scan = shrinker->nr;
shrinker->nr = 0;
while (total_scan >= SHRINK_BATCH) {
long this_scan = SHRINK_BATCH;
int shrink_ret;
int nr_before;
nr_before = (*shrinker->shrink)(0, gfp_mask);
shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);
if (shrink_ret == -1)
break;
if (shrink_ret < nr_before)
ret += nr_before - shrink_ret;
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 12:55:45 +04:00
count_vm_events(SLABS_SCANNED, this_scan);
total_scan -= this_scan;
cond_resched();
}
shrinker->nr += total_scan;
}
up_read(&shrinker_rwsem);
return ret;
}
/* Called without lock on whether page is mapped, so answer is unstable */
static inline int page_mapping_inuse(struct page *page)
{
struct address_space *mapping;
/* Page is in somebody's page tables. */
if (page_mapped(page))
return 1;
/* Be more reluctant to reclaim swapcache than pagecache */
if (PageSwapCache(page))
return 1;
mapping = page_mapping(page);
if (!mapping)
return 0;
/* File is mmap'd by somebody? */
return mapping_mapped(mapping);
}
static inline int is_page_cache_freeable(struct page *page)
{
/*
* A freeable page cache page is referenced only by the caller
* that isolated the page, the page cache radix tree and
* optional buffer heads at page->private.
*/
return page_count(page) - page_has_private(page) == 2;
}
static int may_write_to_queue(struct backing_dev_info *bdi)
{
if (current->flags & PF_SWAPWRITE)
return 1;
if (!bdi_write_congested(bdi))
return 1;
if (bdi == current->backing_dev_info)
return 1;
return 0;
}
/*
* We detected a synchronous write error writing a page out. Probably
* -ENOSPC. We need to propagate that into the address_space for a subsequent
* fsync(), msync() or close().
*
* The tricky part is that after writepage we cannot touch the mapping: nothing
* prevents it from being freed up. But we have a ref on the page and once
* that page is locked, the mapping is pinned.
*
* We're allowed to run sleeping lock_page() here because we know the caller has
* __GFP_FS.
*/
static void handle_write_error(struct address_space *mapping,
struct page *page, int error)
{
lock_page(page);
if (page_mapping(page) == mapping)
mapping_set_error(mapping, error);
unlock_page(page);
}
/* Request for sync pageout. */
enum pageout_io {
PAGEOUT_IO_ASYNC,
PAGEOUT_IO_SYNC,
};
/* possible outcome of pageout() */
typedef enum {
/* failed to write page out, page is locked */
PAGE_KEEP,
/* move page to the active list, page is locked */
PAGE_ACTIVATE,
/* page has been sent to the disk successfully, page is unlocked */
PAGE_SUCCESS,
/* page is clean and locked */
PAGE_CLEAN,
} pageout_t;
/*
* pageout is called by shrink_page_list() for each dirty page.
* Calls ->writepage().
*/
static pageout_t pageout(struct page *page, struct address_space *mapping,
enum pageout_io sync_writeback)
{
/*
* If the page is dirty, only perform writeback if that write
* will be non-blocking. To prevent this allocation from being
* stalled by pagecache activity. But note that there may be
* stalls if we need to run get_block(). We could test
* PagePrivate for that.
*
* If this process is currently in __generic_file_aio_write() against
* this page's queue, we can perform writeback even if that
* will block.
*
* If the page is swapcache, write it back even if that would
* block, for some throttling. This happens by accident, because
* swap_backing_dev_info is bust: it doesn't reflect the
* congestion state of the swapdevs. Easy to fix, if needed.
*/
if (!is_page_cache_freeable(page))
return PAGE_KEEP;
if (!mapping) {
/*
* Some data journaling orphaned pages can have
* page->mapping == NULL while being dirty with clean buffers.
*/
if (page_has_private(page)) {
if (try_to_free_buffers(page)) {
ClearPageDirty(page);
printk("%s: orphaned page\n", __func__);
return PAGE_CLEAN;
}
}
return PAGE_KEEP;
}
if (mapping->a_ops->writepage == NULL)
return PAGE_ACTIVATE;
if (!may_write_to_queue(mapping->backing_dev_info))
return PAGE_KEEP;
if (clear_page_dirty_for_io(page)) {
int res;
struct writeback_control wbc = {
.sync_mode = WB_SYNC_NONE,
.nr_to_write = SWAP_CLUSTER_MAX,
[PATCH] writeback: fix range handling When a writeback_control's `start' and `end' fields are used to indicate a one-byte-range starting at file offset zero, the required values of .start=0,.end=0 mean that the ->writepages() implementation has no way of telling that it is being asked to perform a range request. Because we're currently overloading (start == 0 && end == 0) to mean "this is not a write-a-range request". To make all this sane, the patch changes range of writeback_control. So caller does: If it is calling ->writepages() to write pages, it sets range (range_start/end or range_cyclic) always. And if range_cyclic is true, ->writepages() thinks the range is cyclic, otherwise it just uses range_start and range_end. This patch does, - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h -1 is usually ok for range_end (type is long long). But, if someone did, range_end += val; range_end is "val - 1" u64val = range_end >> bits; u64val is "~(0ULL)" or something, they are wrong. So, this adds LLONG_MAX to avoid nasty things, and uses LLONG_MAX for range_end. - All callers of ->writepages() sets range_start/end or range_cyclic. - Fix updates of ->writeback_index. It seems already bit strange. If it starts at 0 and ended by check of nr_to_write, this last index may reduce chance to scan end of file. So, this updates ->writeback_index only if range_cyclic is true or whole-file is scanned. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Nathan Scott <nathans@sgi.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Steven French <sfrench@us.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 13:03:26 +04:00
.range_start = 0,
.range_end = LLONG_MAX,
.nonblocking = 1,
.for_reclaim = 1,
};
SetPageReclaim(page);
res = mapping->a_ops->writepage(page, &wbc);
if (res < 0)
handle_write_error(mapping, page, res);
if (res == AOP_WRITEPAGE_ACTIVATE) {
ClearPageReclaim(page);
return PAGE_ACTIVATE;
}
/*
* Wait on writeback if requested to. This happens when
* direct reclaiming a large contiguous area and the
* first attempt to free a range of pages fails.
*/
if (PageWriteback(page) && sync_writeback == PAGEOUT_IO_SYNC)
wait_on_page_writeback(page);
if (!PageWriteback(page)) {
/* synchronous write or broken a_ops? */
ClearPageReclaim(page);
}
inc_zone_page_state(page, NR_VMSCAN_WRITE);
return PAGE_SUCCESS;
}
return PAGE_CLEAN;
}
/*
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
* Same as remove_mapping, but if the page is removed from the mapping, it
* gets returned with a refcount of 0.
*/
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
static int __remove_mapping(struct address_space *mapping, struct page *page)
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
{
BUG_ON(!PageLocked(page));
BUG_ON(mapping != page_mapping(page));
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
spin_lock_irq(&mapping->tree_lock);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
/*
* The non racy check for a busy page.
*
* Must be careful with the order of the tests. When someone has
* a ref to the page, it may be possible that they dirty it then
* drop the reference. So if PageDirty is tested before page_count
* here, then the following race may occur:
*
* get_user_pages(&page);
* [user mapping goes away]
* write_to(page);
* !PageDirty(page) [good]
* SetPageDirty(page);
* put_page(page);
* !page_count(page) [good, discard it]
*
* [oops, our write_to data is lost]
*
* Reversing the order of the tests ensures such a situation cannot
* escape unnoticed. The smp_rmb is needed to ensure the page->flags
* load is not satisfied before that of page->_count.
*
* Note that if SetPageDirty is always performed via set_page_dirty,
* and thus under tree_lock, then this ordering is not required.
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
*/
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
if (!page_freeze_refs(page, 2))
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
goto cannot_free;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
/* note: atomic_cmpxchg in page_freeze_refs provides the smp_rmb */
if (unlikely(PageDirty(page))) {
page_unfreeze_refs(page, 2);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
goto cannot_free;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
}
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
if (PageSwapCache(page)) {
swp_entry_t swap = { .val = page_private(page) };
__delete_from_swap_cache(page);
spin_unlock_irq(&mapping->tree_lock);
swapcache_free(swap, page);
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
} else {
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
}
return 1;
cannot_free:
spin_unlock_irq(&mapping->tree_lock);
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
return 0;
}
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
/*
* Attempt to detach a locked page from its ->mapping. If it is dirty or if
* someone else has a ref on the page, abort and return 0. If it was
* successfully detached, return 1. Assumes the caller has a single ref on
* this page.
*/
int remove_mapping(struct address_space *mapping, struct page *page)
{
if (__remove_mapping(mapping, page)) {
/*
* Unfreezing the refcount with 1 rather than 2 effectively
* drops the pagecache ref for us without requiring another
* atomic operation.
*/
page_unfreeze_refs(page, 1);
return 1;
}
return 0;
}
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
/**
* putback_lru_page - put previously isolated page onto appropriate LRU list
* @page: page to be put back to appropriate lru list
*
* Add previously isolated @page to appropriate LRU list.
* Page may still be unevictable for other reasons.
*
* lru_lock must not be held, interrupts must be enabled.
*/
void putback_lru_page(struct page *page)
{
int lru;
int active = !!TestClearPageActive(page);
int was_unevictable = PageUnevictable(page);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
VM_BUG_ON(PageLRU(page));
redo:
ClearPageUnevictable(page);
if (page_evictable(page, NULL)) {
/*
* For evictable pages, we can use the cache.
* In event of a race, worst case is we end up with an
* unevictable page on [in]active list.
* We know how to handle that.
*/
lru = active + page_lru_base_type(page);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
lru_cache_add_lru(page, lru);
} else {
/*
* Put unevictable pages directly on zone's unevictable
* list.
*/
lru = LRU_UNEVICTABLE;
add_page_to_unevictable_list(page);
vmscan: order evictable rescue in LRU putback Isolators putting a page back to the LRU do not hold the page lock, and if the page is mlocked, another thread might munlock it concurrently. Expecting this, the putback code re-checks the evictability of a page when it just moved it to the unevictable list in order to correct its decision. The problem, however, is that ordering is not garuanteed between setting PG_lru when moving the page to the list and checking PG_mlocked afterwards: #0: #1 spin_lock() if (TestClearPageMlocked()) if (PageLRU()) move to evictable list SetPageLRU() spin_unlock() if (!PageMlocked()) move to evictable list The PageMlocked() check may get reordered before SetPageLRU() in #0, resulting in #0 not moving the still mlocked page, and in #1 failing to isolate and move the page as well. The page is now stranded on the unevictable list. The race condition is very unlikely. The consequence currently is one page falling off the reclaim grid and eventually getting freed with PG_unevictable set, which triggers a warning in the page allocator. TestClearPageMlocked() in #1 already provides full memory barrier semantics. This patch adds an explicit full barrier to force ordering between SetPageLRU() and PageMlocked() so that either one of the competitors rescues the page. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-27 02:50:00 +03:00
/*
* When racing with an mlock clearing (page is
* unlocked), make sure that if the other thread does
* not observe our setting of PG_lru and fails
* isolation, we see PG_mlocked cleared below and move
* the page back to the evictable list.
*
* The other side is TestClearPageMlocked().
*/
smp_mb();
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
}
/*
* page's status can change while we move it among lru. If an evictable
* page is on unevictable list, it never be freed. To avoid that,
* check after we added it to the list, again.
*/
if (lru == LRU_UNEVICTABLE && page_evictable(page, NULL)) {
if (!isolate_lru_page(page)) {
put_page(page);
goto redo;
}
/* This means someone else dropped this page from LRU
* So, it will be freed or putback to LRU again. There is
* nothing to do here.
*/
}
if (was_unevictable && lru != LRU_UNEVICTABLE)
count_vm_event(UNEVICTABLE_PGRESCUED);
else if (!was_unevictable && lru == LRU_UNEVICTABLE)
count_vm_event(UNEVICTABLE_PGCULLED);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
put_page(page); /* drop ref from isolate */
}
/*
* shrink_page_list() returns the number of reclaimed pages
*/
static unsigned long shrink_page_list(struct list_head *page_list,
struct scan_control *sc,
enum pageout_io sync_writeback)
{
LIST_HEAD(ret_pages);
struct pagevec freed_pvec;
int pgactivate = 0;
unsigned long nr_reclaimed = 0;
unsigned long vm_flags;
cond_resched();
pagevec_init(&freed_pvec, 1);
while (!list_empty(page_list)) {
struct address_space *mapping;
struct page *page;
int may_enter_fs;
int referenced;
cond_resched();
page = lru_to_page(page_list);
list_del(&page->lru);
if (!trylock_page(page))
goto keep;
VM_BUG_ON(PageActive(page));
sc->nr_scanned++;
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
if (unlikely(!page_evictable(page, NULL)))
goto cull_mlocked;
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
if (!sc->may_unmap && page_mapped(page))
goto keep_locked;
/* Double the slab pressure for mapped and swapcache pages */
if (page_mapped(page) || PageSwapCache(page))
sc->nr_scanned++;
may_enter_fs = (sc->gfp_mask & __GFP_FS) ||
(PageSwapCache(page) && (sc->gfp_mask & __GFP_IO));
if (PageWriteback(page)) {
/*
* Synchronous reclaim is performed in two passes,
* first an asynchronous pass over the list to
* start parallel writeback, and a second synchronous
* pass to wait for the IO to complete. Wait here
* for any page for which writeback has already
* started.
*/
if (sync_writeback == PAGEOUT_IO_SYNC && may_enter_fs)
wait_on_page_writeback(page);
else
goto keep_locked;
}
referenced = page_referenced(page, 1,
sc->mem_cgroup, &vm_flags);
/*
* In active use or really unfreeable? Activate it.
* If page which have PG_mlocked lost isoltation race,
* try_to_unmap moves it to unevictable list
*/
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
if (sc->order <= PAGE_ALLOC_COSTLY_ORDER &&
referenced && page_mapping_inuse(page)
&& !(vm_flags & VM_LOCKED))
goto activate_locked;
/*
* Anonymous process memory has backing store?
* Try to allocate it some swap space here.
*/
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
if (PageAnon(page) && !PageSwapCache(page)) {
if (!(sc->gfp_mask & __GFP_IO))
goto keep_locked;
if (!add_to_swap(page))
goto activate_locked;
may_enter_fs = 1;
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
}
mapping = page_mapping(page);
/*
* The page is mapped into the page tables of one or more
* processes. Try to unmap it here.
*/
if (page_mapped(page) && mapping) {
switch (try_to_unmap(page, TTU_UNMAP)) {
case SWAP_FAIL:
goto activate_locked;
case SWAP_AGAIN:
goto keep_locked;
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
case SWAP_MLOCK:
goto cull_mlocked;
case SWAP_SUCCESS:
; /* try to free the page below */
}
}
if (PageDirty(page)) {
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
if (sc->order <= PAGE_ALLOC_COSTLY_ORDER && referenced)
goto keep_locked;
if (!may_enter_fs)
goto keep_locked;
if (!sc->may_writepage)
goto keep_locked;
/* Page is dirty, try to write it out here */
switch (pageout(page, mapping, sync_writeback)) {
case PAGE_KEEP:
goto keep_locked;
case PAGE_ACTIVATE:
goto activate_locked;
case PAGE_SUCCESS:
if (PageWriteback(page) || PageDirty(page))
goto keep;
/*
* A synchronous write - probably a ramdisk. Go
* ahead and try to reclaim the page.
*/
if (!trylock_page(page))
goto keep;
if (PageDirty(page) || PageWriteback(page))
goto keep_locked;
mapping = page_mapping(page);
case PAGE_CLEAN:
; /* try to free the page below */
}
}
/*
* If the page has buffers, try to free the buffer mappings
* associated with this page. If we succeed we try to free
* the page as well.
*
* We do this even if the page is PageDirty().
* try_to_release_page() does not perform I/O, but it is
* possible for a page to have PageDirty set, but it is actually
* clean (all its buffers are clean). This happens if the
* buffers were written out directly, with submit_bh(). ext3
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
* will do this, as well as the blockdev mapping.
* try_to_release_page() will discover that cleanness and will
* drop the buffers and mark the page clean - it can be freed.
*
* Rarely, pages can have buffers and no ->mapping. These are
* the pages which were not successfully invalidated in
* truncate_complete_page(). We try to drop those buffers here
* and if that worked, and the page is no longer mapped into
* process address space (page_count == 1) it can be freed.
* Otherwise, leave the page on the LRU so it is swappable.
*/
if (page_has_private(page)) {
if (!try_to_release_page(page, sc->gfp_mask))
goto activate_locked;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
if (!mapping && page_count(page) == 1) {
unlock_page(page);
if (put_page_testzero(page))
goto free_it;
else {
/*
* rare race with speculative reference.
* the speculative reference will free
* this page shortly, so we may
* increment nr_reclaimed here (and
* leave it off the LRU).
*/
nr_reclaimed++;
continue;
}
}
}
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
if (!mapping || !__remove_mapping(mapping, page))
[PATCH] Swap Migration V5: migrate_pages() function This adds the basic page migration function with a minimal implementation that only allows the eviction of pages to swap space. Page eviction and migration may be useful to migrate pages, to suspend programs or for remapping single pages (useful for faulty pages or pages with soft ECC failures) The process is as follows: The function wanting to migrate pages must first build a list of pages to be migrated or evicted and take them off the lru lists via isolate_lru_page(). isolate_lru_page determines that a page is freeable based on the LRU bit set. Then the actual migration or swapout can happen by calling migrate_pages(). migrate_pages does its best to migrate or swapout the pages and does multiple passes over the list. Some pages may only be swappable if they are not dirty. migrate_pages may start writing out dirty pages in the initial passes over the pages. However, migrate_pages may not be able to migrate or evict all pages for a variety of reasons. The remaining pages may be returned to the LRU lists using putback_lru_pages(). Changelog V4->V5: - Use the lru caches to return pages to the LRU Changelog V3->V4: - Restructure code so that applying patches to support full migration does require minimal changes. Rename swapout_pages() to migrate_pages(). Changelog V2->V3: - Extract common code from shrink_list() and swapout_pages() Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Michael Kerrisk" <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:00:48 +03:00
goto keep_locked;
/*
* At this point, we have no other references and there is
* no way to pick any more up (removed from LRU, removed
* from pagecache). Can use non-atomic bitops now (and
* we obviously don't have to worry about waking up a process
* waiting on the page lock, because there are no references.
*/
__clear_page_locked(page);
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
free_it:
nr_reclaimed++;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
if (!pagevec_add(&freed_pvec, page)) {
__pagevec_free(&freed_pvec);
pagevec_reinit(&freed_pvec);
}
continue;
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
cull_mlocked:
if (PageSwapCache(page))
try_to_free_swap(page);
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
unlock_page(page);
putback_lru_page(page);
continue;
activate_locked:
/* Not a candidate for swapping, so reclaim swap space. */
if (PageSwapCache(page) && vm_swap_full())
mm: try_to_free_swap replaces remove_exclusive_swap_page remove_exclusive_swap_page(): its problem is in living up to its name. It doesn't matter if someone else has a reference to the page (raised page_count); it doesn't matter if the page is mapped into userspace (raised page_mapcount - though that hints it may be worth keeping the swap): all that matters is that there be no more references to the swap (and no writeback in progress). swapoff (try_to_unuse) has been removing pages from swapcache for years, with no concern for page count or page mapcount, and we used to have a comment in lookup_swap_cache() recognizing that: if you go for a page of swapcache, you'll get the right page, but it could have been removed from swapcache by the time you get page lock. So, give up asking for exclusivity: get rid of remove_exclusive_swap_page(), and remove_exclusive_swap_page_ref() and remove_exclusive_swap_page_count() which were spawned for the recent LRU work: replace them by the simpler try_to_free_swap() which just checks page_swapcount(). Similarly, remove the page_count limitation from free_swap_and_count(), but assume that it's worth holding on to the swap if page is mapped and swap nowhere near full. Add a vm_swap_full() test in free_swap_cache()? It would be consistent, but I think we probably have enough for now. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:39:36 +03:00
try_to_free_swap(page);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
VM_BUG_ON(PageActive(page));
SetPageActive(page);
pgactivate++;
keep_locked:
unlock_page(page);
keep:
list_add(&page->lru, &ret_pages);
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
VM_BUG_ON(PageLRU(page) || PageUnevictable(page));
}
list_splice(&ret_pages, page_list);
if (pagevec_count(&freed_pvec))
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:45:30 +04:00
__pagevec_free(&freed_pvec);
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 12:55:45 +04:00
count_vm_events(PGACTIVATE, pgactivate);
return nr_reclaimed;
}
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
/* LRU Isolation modes. */
#define ISOLATE_INACTIVE 0 /* Isolate inactive pages. */
#define ISOLATE_ACTIVE 1 /* Isolate active pages. */
#define ISOLATE_BOTH 2 /* Isolate both active and inactive pages. */
/*
* Attempt to remove the specified page from its LRU. Only take this page
* if it is of the appropriate PageActive status. Pages which are being
* freed elsewhere are also ignored.
*
* page: page to consider
* mode: one of the LRU isolation modes defined above
*
* returns 0 on success, -ve errno on failure.
*/
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
int __isolate_lru_page(struct page *page, int mode, int file)
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
{
int ret = -EINVAL;
/* Only take pages on the LRU. */
if (!PageLRU(page))
return ret;
/*
* When checking the active state, we need to be sure we are
* dealing with comparible boolean values. Take the logical not
* of each.
*/
if (mode != ISOLATE_BOTH && (!PageActive(page) != !mode))
return ret;
if (mode != ISOLATE_BOTH && page_is_file_cache(page) != file)
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
return ret;
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
/*
* When this function is being called for lumpy reclaim, we
* initially look into all LRU pages, active, inactive and
* unevictable; only give shrink_page_list evictable pages.
*/
if (PageUnevictable(page))
return ret;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
ret = -EBUSY;
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
if (likely(get_page_unless_zero(page))) {
/*
* Be careful not to clear PageLRU until after we're
* sure the page is not being freed elsewhere -- the
* page release code relies on it.
*/
ClearPageLRU(page);
ret = 0;
}
return ret;
}
/*
* zone->lru_lock is heavily contended. Some of the functions that
* shrink the lists perform better by taking out a batch of pages
* and working on them outside the LRU lock.
*
* For pagecache intensive workloads, this function is the hottest
* spot in the kernel (apart from copy_*_user functions).
*
* Appropriate locks must be held before calling this function.
*
* @nr_to_scan: The number of pages to look through on the list.
* @src: The LRU list to pull pages off.
* @dst: The temp list to put pages on to.
* @scanned: The number of pages that were scanned.
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
* @order: The caller's attempted allocation order
* @mode: One of the LRU isolation modes
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
* @file: True [1] if isolating file [!anon] pages
*
* returns how many pages were moved onto *@dst.
*/
static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
struct list_head *src, struct list_head *dst,
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
unsigned long *scanned, int order, int mode, int file)
{
unsigned long nr_taken = 0;
unsigned long scan;
for (scan = 0; scan < nr_to_scan && !list_empty(src); scan++) {
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
struct page *page;
unsigned long pfn;
unsigned long end_pfn;
unsigned long page_pfn;
int zone_id;
page = lru_to_page(src);
prefetchw_prev_lru_page(page, src, flags);
VM_BUG_ON(!PageLRU(page));
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
switch (__isolate_lru_page(page, mode, file)) {
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
case 0:
list_move(&page->lru, dst);
mem_cgroup_del_lru(page);
nr_taken++;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
break;
case -EBUSY:
/* else it is being freed elsewhere */
list_move(&page->lru, src);
mem_cgroup_rotate_lru_list(page, page_lru(page));
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
continue;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
default:
BUG();
}
if (!order)
continue;
/*
* Attempt to take all pages in the order aligned region
* surrounding the tag page. Only take those pages of
* the same active state as that tag page. We may safely
* round the target page pfn down to the requested order
* as the mem_map is guarenteed valid out to MAX_ORDER,
* where that page is in a different zone we will detect
* it from its zone id and abort this block scan.
*/
zone_id = page_zone_id(page);
page_pfn = page_to_pfn(page);
pfn = page_pfn & ~((1 << order) - 1);
end_pfn = pfn + (1 << order);
for (; pfn < end_pfn; pfn++) {
struct page *cursor_page;
/* The target page is in the block, ignore it. */
if (unlikely(pfn == page_pfn))
continue;
/* Avoid holes within the zone. */
if (unlikely(!pfn_valid_within(pfn)))
break;
cursor_page = pfn_to_page(pfn);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
/* Check that we have not crossed a zone boundary. */
if (unlikely(page_zone_id(cursor_page) != zone_id))
continue;
/*
* If we don't have enough swap space, reclaiming of
* anon page which don't already have a swap slot is
* pointless.
*/
if (nr_swap_pages <= 0 && PageAnon(cursor_page) &&
!PageSwapCache(cursor_page))
continue;
if (__isolate_lru_page(cursor_page, mode, file) == 0) {
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
list_move(&cursor_page->lru, dst);
mem_cgroup_del_lru(cursor_page);
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
nr_taken++;
scan++;
}
}
}
*scanned = scan;
return nr_taken;
}
static unsigned long isolate_pages_global(unsigned long nr,
struct list_head *dst,
unsigned long *scanned, int order,
int mode, struct zone *z,
struct mem_cgroup *mem_cont,
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
int active, int file)
{
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
int lru = LRU_BASE;
if (active)
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
lru += LRU_ACTIVE;
if (file)
lru += LRU_FILE;
return isolate_lru_pages(nr, &z->lru[lru].list, dst, scanned, order,
mode, file);
}
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
/*
* clear_active_flags() is a helper for shrink_active_list(), clearing
* any active bits from the pages in the list.
*/
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
static unsigned long clear_active_flags(struct list_head *page_list,
unsigned int *count)
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
{
int nr_active = 0;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
int lru;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
struct page *page;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
list_for_each_entry(page, page_list, lru) {
lru = page_lru_base_type(page);
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
if (PageActive(page)) {
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
lru += LRU_ACTIVE;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
ClearPageActive(page);
nr_active++;
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
count[lru]++;
}
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
return nr_active;
}
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:09 +04:00
/**
* isolate_lru_page - tries to isolate a page from its LRU list
* @page: page to isolate from its LRU list
*
* Isolates a @page from an LRU list, clears PageLRU and adjusts the
* vmstat statistic corresponding to whatever LRU list the page was on.
*
* Returns 0 if the page was removed from an LRU list.
* Returns -EBUSY if the page was not on an LRU list.
*
* The returned page will have PageLRU() cleared. If it was found on
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
* the active list, it will have PageActive set. If it was found on
* the unevictable list, it will have the PageUnevictable bit set. That flag
* may need to be cleared by the caller before letting the page go.
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:09 +04:00
*
* The vmstat statistic corresponding to the list on which the page was
* found will be decremented.
*
* Restrictions:
* (1) Must be called with an elevated refcount on the page. This is a
* fundamentnal difference from isolate_lru_pages (which is called
* without a stable reference).
* (2) the lru_lock must not be held.
* (3) interrupts must be enabled.
*/
int isolate_lru_page(struct page *page)
{
int ret = -EBUSY;
if (PageLRU(page)) {
struct zone *zone = page_zone(page);
spin_lock_irq(&zone->lru_lock);
if (PageLRU(page) && get_page_unless_zero(page)) {
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
int lru = page_lru(page);
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:09 +04:00
ret = 0;
ClearPageLRU(page);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
del_page_from_lru_list(zone, page, lru);
vmscan: move isolate_lru_page() to vmscan.c On large memory systems, the VM can spend way too much time scanning through pages that it cannot (or should not) evict from memory. Not only does it use up CPU time, but it also provokes lock contention and can leave large systems under memory presure in a catatonic state. This patch series improves VM scalability by: 1) putting filesystem backed, swap backed and unevictable pages onto their own LRUs, so the system only scans the pages that it can/should evict from memory 2) switching to two handed clock replacement for the anonymous LRUs, so the number of pages that need to be scanned when the system starts swapping is bound to a reasonable number 3) keeping unevictable pages off the LRU completely, so the VM does not waste CPU time scanning them. ramfs, ramdisk, SHM_LOCKED shared memory segments and mlock()ed VMA pages are keept on the unevictable list. This patch: isolate_lru_page logically belongs to be in vmscan.c than migrate.c. It is tough, because we don't need that function without memory migration so there is a valid argument to have it in migrate.c. However a subsequent patch needs to make use of it in the core mm, so we can happily move it to vmscan.c. Also, make the function a little more generic by not requiring that it adds an isolated page to a given list. Callers can do that. Note that we now have '__isolate_lru_page()', that does something quite different, visible outside of vmscan.c for use with memory controller. Methinks we need to rationalize these names/purposes. --lts [akpm@linux-foundation.org: fix mm/memory_hotplug.c build] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:09 +04:00
}
spin_unlock_irq(&zone->lru_lock);
}
return ret;
}
/*
* Are there way too many processes in the direct reclaim path already?
*/
static int too_many_isolated(struct zone *zone, int file,
struct scan_control *sc)
{
unsigned long inactive, isolated;
if (current_is_kswapd())
return 0;
if (!scanning_global_lru(sc))
return 0;
if (file) {
inactive = zone_page_state(zone, NR_INACTIVE_FILE);
isolated = zone_page_state(zone, NR_ISOLATED_FILE);
} else {
inactive = zone_page_state(zone, NR_INACTIVE_ANON);
isolated = zone_page_state(zone, NR_ISOLATED_ANON);
}
return isolated > inactive;
}
/*
* shrink_inactive_list() is a helper for shrink_zone(). It returns the number
* of reclaimed pages
*/
static unsigned long shrink_inactive_list(unsigned long max_scan,
struct zone *zone, struct scan_control *sc,
int priority, int file)
{
LIST_HEAD(page_list);
struct pagevec pvec;
unsigned long nr_scanned = 0;
unsigned long nr_reclaimed = 0;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
vmscan: low order lumpy reclaim also should use PAGEOUT_IO_SYNC Commit 33c120ed2843090e2bd316de1588b8bf8b96cbde ("more aggressively use lumpy reclaim") increased how aggressive lumpy reclaim was by isolating both active and inactive pages for asynchronous lumpy reclaim on costly-high-order pages and for cheap-high-order when memory pressure is high. However, if the system is under heavy pressure and there are dirty pages, asynchronous IO may not be sufficient to reclaim a suitable page in time. This patch causes the caller to enter synchronous lumpy reclaim for costly-high-order pages and for cheap-high-order pages when under memory pressure. Minchan.kim@gmail.com said: Andy added synchronous lumpy reclaim with c661b078fd62abe06fd11fab4ac5e4eeafe26b6d. At that time, lumpy reclaim is not agressive. His intension is just for high-order users.(above PAGE_ALLOC_COSTLY_ORDER). After some time, Rik added aggressive lumpy reclaim with 33c120ed2843090e2bd316de1588b8bf8b96cbde. His intention was to do lumpy reclaim when high-order users and trouble getting a small set of contiguous pages. So we also have to add synchronous pageout for small set of contiguous pages. Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <Minchan.kim@gmail.com> Reviewed-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:31:40 +04:00
int lumpy_reclaim = 0;
while (unlikely(too_many_isolated(zone, file, sc))) {
congestion_wait(BLK_RW_ASYNC, HZ/10);
/* We are about to die and free our memory. Return now. */
if (fatal_signal_pending(current))
return SWAP_CLUSTER_MAX;
}
vmscan: low order lumpy reclaim also should use PAGEOUT_IO_SYNC Commit 33c120ed2843090e2bd316de1588b8bf8b96cbde ("more aggressively use lumpy reclaim") increased how aggressive lumpy reclaim was by isolating both active and inactive pages for asynchronous lumpy reclaim on costly-high-order pages and for cheap-high-order when memory pressure is high. However, if the system is under heavy pressure and there are dirty pages, asynchronous IO may not be sufficient to reclaim a suitable page in time. This patch causes the caller to enter synchronous lumpy reclaim for costly-high-order pages and for cheap-high-order pages when under memory pressure. Minchan.kim@gmail.com said: Andy added synchronous lumpy reclaim with c661b078fd62abe06fd11fab4ac5e4eeafe26b6d. At that time, lumpy reclaim is not agressive. His intension is just for high-order users.(above PAGE_ALLOC_COSTLY_ORDER). After some time, Rik added aggressive lumpy reclaim with 33c120ed2843090e2bd316de1588b8bf8b96cbde. His intention was to do lumpy reclaim when high-order users and trouble getting a small set of contiguous pages. So we also have to add synchronous pageout for small set of contiguous pages. Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <Minchan.kim@gmail.com> Reviewed-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:31:40 +04:00
/*
* If we need a large contiguous chunk of memory, or have
* trouble getting a small set of contiguous pages, we
* will reclaim both active and inactive pages.
*
* We use the same threshold as pageout congestion_wait below.
*/
if (sc->order > PAGE_ALLOC_COSTLY_ORDER)
lumpy_reclaim = 1;
else if (sc->order && priority < DEF_PRIORITY - 2)
lumpy_reclaim = 1;
pagevec_init(&pvec, 1);
lru_add_drain();
spin_lock_irq(&zone->lru_lock);
do {
struct page *page;
unsigned long nr_taken;
unsigned long nr_scan;
unsigned long nr_freed;
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
unsigned long nr_active;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
unsigned int count[NR_LRU_LISTS] = { 0, };
vmscan: low order lumpy reclaim also should use PAGEOUT_IO_SYNC Commit 33c120ed2843090e2bd316de1588b8bf8b96cbde ("more aggressively use lumpy reclaim") increased how aggressive lumpy reclaim was by isolating both active and inactive pages for asynchronous lumpy reclaim on costly-high-order pages and for cheap-high-order when memory pressure is high. However, if the system is under heavy pressure and there are dirty pages, asynchronous IO may not be sufficient to reclaim a suitable page in time. This patch causes the caller to enter synchronous lumpy reclaim for costly-high-order pages and for cheap-high-order pages when under memory pressure. Minchan.kim@gmail.com said: Andy added synchronous lumpy reclaim with c661b078fd62abe06fd11fab4ac5e4eeafe26b6d. At that time, lumpy reclaim is not agressive. His intension is just for high-order users.(above PAGE_ALLOC_COSTLY_ORDER). After some time, Rik added aggressive lumpy reclaim with 33c120ed2843090e2bd316de1588b8bf8b96cbde. His intention was to do lumpy reclaim when high-order users and trouble getting a small set of contiguous pages. So we also have to add synchronous pageout for small set of contiguous pages. Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <Minchan.kim@gmail.com> Reviewed-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:31:40 +04:00
int mode = lumpy_reclaim ? ISOLATE_BOTH : ISOLATE_INACTIVE;
unsigned long nr_anon;
unsigned long nr_file;
nr_taken = sc->isolate_pages(SWAP_CLUSTER_MAX,
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
&page_list, &nr_scan, sc->order, mode,
zone, sc->mem_cgroup, 0, file);
if (scanning_global_lru(sc)) {
zone->pages_scanned += nr_scan;
if (current_is_kswapd())
__count_zone_vm_events(PGSCAN_KSWAPD, zone,
nr_scan);
else
__count_zone_vm_events(PGSCAN_DIRECT, zone,
nr_scan);
}
if (nr_taken == 0)
goto done;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
nr_active = clear_active_flags(&page_list, count);
synchronous lumpy reclaim: ensure we count pages transitioning inactive via clear_active_flags As pointed out by Mel when reclaim is applied at higher orders a significant amount of IO may be started. As this takes finite time to drain reclaim will consider more areas than ultimatly needed to satisfy the request. This leads to more reclaim than strictly required and reduced success rates. I was able to confirm Mel's test results on systems locally. These show that even under light load the success rates drop off far more than expected. Testing with a modified version of his patch (which follows) I was able to allocate almost all of ZONE_MOVABLE with a near idle system. I ran 5 test passes sequentially following system boot (the system has 29 hugepages in ZONE_MOVABLE): 2.6.23-rc1 11 8 6 7 7 sync_lumpy 28 28 29 29 26 These show that although hugely better than the near 0% success normally expected we can only allocate about a 1/4 of the zone. Using synchronous reclaim for these allocations we get close to 100% as expected. I have also run our standard high order tests and these show no regressions in allocation success rates at rest, and some significant improvements under load. This patch: We are transitioning pages from active to inactive in clear_active_flags, those need counting as PGDEACTIVATE vm events. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-23 01:01:25 +04:00
__count_vm_events(PGDEACTIVATE, nr_active);
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
__mod_zone_page_state(zone, NR_ACTIVE_FILE,
-count[LRU_ACTIVE_FILE]);
__mod_zone_page_state(zone, NR_INACTIVE_FILE,
-count[LRU_INACTIVE_FILE]);
__mod_zone_page_state(zone, NR_ACTIVE_ANON,
-count[LRU_ACTIVE_ANON]);
__mod_zone_page_state(zone, NR_INACTIVE_ANON,
-count[LRU_INACTIVE_ANON]);
nr_anon = count[LRU_ACTIVE_ANON] + count[LRU_INACTIVE_ANON];
nr_file = count[LRU_ACTIVE_FILE] + count[LRU_INACTIVE_FILE];
__mod_zone_page_state(zone, NR_ISOLATED_ANON, nr_anon);
__mod_zone_page_state(zone, NR_ISOLATED_FILE, nr_file);
reclaim_stat->recent_scanned[0] += nr_anon;
reclaim_stat->recent_scanned[1] += nr_file;
spin_unlock_irq(&zone->lru_lock);
nr_scanned += nr_scan;
nr_freed = shrink_page_list(&page_list, sc, PAGEOUT_IO_ASYNC);
/*
* If we are direct reclaiming for contiguous pages and we do
* not reclaim everything in the list, try again and wait
* for IO to complete. This will stall high-order allocations
* but that should be acceptable to the caller
*/
if (nr_freed < nr_taken && !current_is_kswapd() &&
vmscan: low order lumpy reclaim also should use PAGEOUT_IO_SYNC Commit 33c120ed2843090e2bd316de1588b8bf8b96cbde ("more aggressively use lumpy reclaim") increased how aggressive lumpy reclaim was by isolating both active and inactive pages for asynchronous lumpy reclaim on costly-high-order pages and for cheap-high-order when memory pressure is high. However, if the system is under heavy pressure and there are dirty pages, asynchronous IO may not be sufficient to reclaim a suitable page in time. This patch causes the caller to enter synchronous lumpy reclaim for costly-high-order pages and for cheap-high-order pages when under memory pressure. Minchan.kim@gmail.com said: Andy added synchronous lumpy reclaim with c661b078fd62abe06fd11fab4ac5e4eeafe26b6d. At that time, lumpy reclaim is not agressive. His intension is just for high-order users.(above PAGE_ALLOC_COSTLY_ORDER). After some time, Rik added aggressive lumpy reclaim with 33c120ed2843090e2bd316de1588b8bf8b96cbde. His intention was to do lumpy reclaim when high-order users and trouble getting a small set of contiguous pages. So we also have to add synchronous pageout for small set of contiguous pages. Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Minchan Kim <Minchan.kim@gmail.com> Reviewed-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:31:40 +04:00
lumpy_reclaim) {
congestion_wait(BLK_RW_ASYNC, HZ/10);
/*
* The attempt at page out may have made some
* of the pages active, mark them inactive again.
*/
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
nr_active = clear_active_flags(&page_list, count);
count_vm_events(PGDEACTIVATE, nr_active);
nr_freed += shrink_page_list(&page_list, sc,
PAGEOUT_IO_SYNC);
}
nr_reclaimed += nr_freed;
local_irq_disable();
if (current_is_kswapd())
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 12:55:45 +04:00
__count_vm_events(KSWAPD_STEAL, nr_freed);
__count_zone_vm_events(PGSTEAL, zone, nr_freed);
spin_lock(&zone->lru_lock);
/*
* Put back any unfreeable pages.
*/
while (!list_empty(&page_list)) {
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
int lru;
page = lru_to_page(&page_list);
VM_BUG_ON(PageLRU(page));
list_del(&page->lru);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
if (unlikely(!page_evictable(page, NULL))) {
spin_unlock_irq(&zone->lru_lock);
putback_lru_page(page);
spin_lock_irq(&zone->lru_lock);
continue;
}
SetPageLRU(page);
lru = page_lru(page);
add_page_to_lru_list(zone, page, lru);
if (is_active_lru(lru)) {
int file = is_file_lru(lru);
reclaim_stat->recent_rotated[file]++;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
}
if (!pagevec_add(&pvec, page)) {
spin_unlock_irq(&zone->lru_lock);
__pagevec_release(&pvec);
spin_lock_irq(&zone->lru_lock);
}
}
__mod_zone_page_state(zone, NR_ISOLATED_ANON, -nr_anon);
__mod_zone_page_state(zone, NR_ISOLATED_FILE, -nr_file);
} while (nr_scanned < max_scan);
done:
spin_unlock_irq(&zone->lru_lock);
pagevec_release(&pvec);
return nr_reclaimed;
}
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
/*
* We are about to scan this zone at a certain priority level. If that priority
* level is smaller (ie: more urgent) than the previous priority, then note
* that priority level within the zone. This is done so that when the next
* process comes in to scan this zone, it will immediately start out at this
* priority level rather than having to build up its own scanning priority.
* Here, this priority affects only the reclaim-mapped threshold.
*/
static inline void note_zone_scanning_priority(struct zone *zone, int priority)
{
if (priority < zone->prev_priority)
zone->prev_priority = priority;
}
/*
* This moves pages from the active list to the inactive list.
*
* We move them the other way if the page is referenced by one or more
* processes, from rmap.
*
* If the pages are mostly unmapped, the processing is fast and it is
* appropriate to hold zone->lru_lock across the whole operation. But if
* the pages are mapped, the processing is slow (page_referenced()) so we
* should drop zone->lru_lock around each page. It's impossible to balance
* this, so instead we remove the pages from the LRU while processing them.
* It is safe to rely on PG_active against the non-LRU pages in here because
* nobody will play with that bit on a non-LRU page.
*
* The downside is that we have to touch page->_count against each page.
* But we had to alter page->flags anyway.
*/
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
static void move_active_pages_to_lru(struct zone *zone,
struct list_head *list,
enum lru_list lru)
{
unsigned long pgmoved = 0;
struct pagevec pvec;
struct page *page;
pagevec_init(&pvec, 1);
while (!list_empty(list)) {
page = lru_to_page(list);
VM_BUG_ON(PageLRU(page));
SetPageLRU(page);
list_move(&page->lru, &zone->lru[lru].list);
mem_cgroup_add_lru_list(page, lru);
pgmoved++;
if (!pagevec_add(&pvec, page) || list_empty(list)) {
spin_unlock_irq(&zone->lru_lock);
if (buffer_heads_over_limit)
pagevec_strip(&pvec);
__pagevec_release(&pvec);
spin_lock_irq(&zone->lru_lock);
}
}
__mod_zone_page_state(zone, NR_LRU_BASE + lru, pgmoved);
if (!is_active_lru(lru))
__count_vm_events(PGDEACTIVATE, pgmoved);
}
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
static void shrink_active_list(unsigned long nr_pages, struct zone *zone,
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
struct scan_control *sc, int priority, int file)
{
unsigned long nr_taken;
unsigned long pgscanned;
unsigned long vm_flags;
LIST_HEAD(l_hold); /* The pages which were snipped off */
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:12 +04:00
LIST_HEAD(l_active);
LIST_HEAD(l_inactive);
struct page *page;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
unsigned long nr_rotated = 0;
lru_add_drain();
spin_lock_irq(&zone->lru_lock);
nr_taken = sc->isolate_pages(nr_pages, &l_hold, &pgscanned, sc->order,
ISOLATE_ACTIVE, zone,
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
sc->mem_cgroup, 1, file);
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
/*
* zone->pages_scanned is used for detect zone's oom
* mem_cgroup remembers nr_scan by itself.
*/
if (scanning_global_lru(sc)) {
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
zone->pages_scanned += pgscanned;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
}
reclaim_stat->recent_scanned[file] += nr_taken;
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
__count_zone_vm_events(PGREFILL, zone, pgscanned);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
if (file)
__mod_zone_page_state(zone, NR_ACTIVE_FILE, -nr_taken);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
else
__mod_zone_page_state(zone, NR_ACTIVE_ANON, -nr_taken);
__mod_zone_page_state(zone, NR_ISOLATED_ANON + file, nr_taken);
spin_unlock_irq(&zone->lru_lock);
while (!list_empty(&l_hold)) {
cond_resched();
page = lru_to_page(&l_hold);
list_del(&page->lru);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
if (unlikely(!page_evictable(page, NULL))) {
putback_lru_page(page);
continue;
}
/* page_referenced clears PageReferenced */
if (page_mapping_inuse(page) &&
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:12 +04:00
page_referenced(page, 0, sc->mem_cgroup, &vm_flags)) {
nr_rotated++;
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:12 +04:00
/*
* Identify referenced, file-backed active pages and
* give them one more trip around the active list. So
* that executable code get better chances to stay in
* memory under moderate memory pressure. Anon pages
* are not likely to be evicted by use-once streaming
* IO, plus JVM can create lots of anon VM_EXEC pages,
* so we ignore them here.
*/
if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) {
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:12 +04:00
list_add(&page->lru, &l_active);
continue;
}
}
ClearPageActive(page); /* we are de-activating */
list_add(&page->lru, &l_inactive);
}
/*
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:12 +04:00
* Move pages back to the lru list.
*/
spin_lock_irq(&zone->lru_lock);
/*
vmscan: make mapped executable pages the first class citizen Protect referenced PROT_EXEC mapped pages from being deactivated. PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some currently running executables and their linked libraries, they shall really be cached aggressively to provide good user experiences. Thanks to Johannes Weiner for the advice to reuse the VMA walk in page_referenced() to get the PROT_EXEC bit. [more details] ( The consequences of this patch will have to be discussed together with Rik van Riel's recent patch "vmscan: evict use-once pages first". ) ( Some of the good points and insights are taken into this changelog. Thanks to all the involved people for the great LKML discussions. ) the problem =========== For a typical desktop, the most precious working set is composed of *actively accessed* (1) memory mapped executables (2) and their anonymous pages (3) and other files (4) and the dcache/icache/.. slabs while the least important data are (5) infrequently used or use-once files For a typical desktop, one major problem is busty and large amount of (5) use-once files flushing out the working set. Inside the working set, (4) dcache/icache have already been too sticky ;-) So we only have to care (2) anonymous and (1)(3) file pages. anonymous pages =============== Anonymous pages are effectively immune to the streaming IO attack, because we now have separate file/anon LRU lists. When the use-once files crowd into the file LRU, the list's "quality" is significantly lowered. Therefore the scan balance policy in get_scan_ratio() will choose to scan the (low quality) file LRU much more frequently than the anon LRU. file pages ========== Rik proposed to *not* scan the active file LRU when the inactive list grows larger than active list. This guarantees that when there are use-once streaming IO, and the working set is not too large(so that active_size < inactive_size), the active file LRU will *not* be scanned at all. So the not-too-large working set can be well protected. But there are also situations where the file working set is a bit large so that (active_size >= inactive_size), or the streaming IOs are not purely use-once. In these cases, the active list will be scanned slowly. Because the current shrink_active_list() policy is to deactivate active pages regardless of their referenced bits. The deactivated pages become susceptible to the streaming IO attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that the deactivated pages don't have enough time to get re-referenced. Because a user tend to switch between windows in intervals from seconds to minutes. This patch holds mapped executable pages in the active list as long as they are referenced during each full scan of the active list. Because the active list is normally scanned much slower, they get longer grace time (eg. 100s) for further references, which better matches the pace of user operations. Therefore this patch greatly prolongs the in-cache time of executable code, when there are moderate memory pressures. before patch: guaranteed to be cached if reference intervals < I after patch: guaranteed to be cached if reference intervals < I+A (except when randomly reclaimed by the lumpy reclaim) where A = time to fully scan the active file LRU I = time to fully scan the inactive file LRU Note that normally A >> I. side effects ============ This patch is safe in general, it restores the pre-2.6.28 mmap() behavior but in a much smaller and well targeted scope. One may worry about some one to abuse the PROT_EXEC heuristic. But as Andrew Morton stated, there are other tricks to getting that sort of boost. Another concern is the PROT_EXEC mapped pages growing large in rare cases, and therefore hurting reclaim efficiency. But a sane application targeted for large audience will never use PROT_EXEC for data mappings. If some home made application tries to abuse that bit, it shall be aware of the consequences. If it is abused to scale of 2/3 total memory, it gains nothing but overheads. benchmarks ========== 1) memory tight desktop 1.1) brief summary - clock time and major faults are reduced by 50%; - pswpin numbers are reduced to ~1/3. That means X desktop responsiveness is doubled under high memory/swap pressure. 1.2) test scenario - nfsroot gnome desktop with 512M physical memory - run some programs, and switch between the existing windows after starting each new program. 1.3) progress timing (seconds) before after programs 0.02 0.02 N xeyes 0.75 0.76 N firefox 2.02 1.88 N nautilus 3.36 3.17 N nautilus --browser 5.26 4.89 N gthumb 7.12 6.47 N gedit 9.22 8.16 N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf 13.58 12.55 N xterm 15.87 14.57 N mlterm 18.63 17.06 N gnome-terminal 21.16 18.90 N urxvt 26.24 23.48 N gnome-system-monitor 28.72 26.52 N gnome-help 32.15 29.65 N gnome-dictionary 39.66 36.12 N /usr/games/sol 43.16 39.27 N /usr/games/gnometris 48.65 42.56 N /usr/games/gnect 53.31 47.03 N /usr/games/gtali 58.60 52.05 N /usr/games/iagno 65.77 55.42 N /usr/games/gnotravex 70.76 61.47 N /usr/games/mahjongg 76.15 67.11 N /usr/games/gnome-sudoku 86.32 75.15 N /usr/games/glines 92.21 79.70 N /usr/games/glchess 103.79 88.48 N /usr/games/gnomine 113.84 96.51 N /usr/games/gnotski 124.40 102.19 N /usr/games/gnibbles 137.41 114.93 N /usr/games/gnobots2 155.53 125.02 N /usr/games/blackjack 179.85 135.11 N /usr/games/same-gnome 224.49 154.50 N /usr/bin/gnome-window-properties 248.44 162.09 N /usr/bin/gnome-default-applications-properties 282.62 173.29 N /usr/bin/gnome-at-properties 323.72 188.21 N /usr/bin/gnome-typing-monitor 363.99 199.93 N /usr/bin/gnome-at-visual 394.21 206.95 N /usr/bin/gnome-sound-properties 435.14 224.49 N /usr/bin/gnome-at-mobility 463.05 234.11 N /usr/bin/gnome-keybinding-properties 503.75 248.59 N /usr/bin/gnome-about-me 554.00 276.27 N /usr/bin/gnome-display-properties 615.48 304.39 N /usr/bin/gnome-network-preferences 693.03 342.01 N /usr/bin/gnome-mouse-properties 759.90 388.58 N /usr/bin/gnome-appearance-properties 937.90 508.47 N /usr/bin/gnome-control-center 1109.75 587.57 N /usr/bin/gnome-keyboard-properties 1399.05 758.16 N : oocalc 1524.64 830.03 N : oodraw 1684.31 900.03 N : ooimpress 1874.04 993.91 N : oomath 2115.12 1081.89 N : ooweb 2369.02 1161.99 N : oowriter Note that the last ": oo*" commands are actually commented out. 1.4) vmstat numbers (some relevant ones are marked with *) before after nr_free_pages 1293 3898 nr_inactive_anon 59956 53460 nr_active_anon 26815 30026 nr_inactive_file 2657 3218 nr_active_file 2019 2806 nr_unevictable 4 4 nr_mlock 4 4 nr_anon_pages 26706 27859 *nr_mapped 3542 4469 nr_file_pages 72232 67681 nr_dirty 1 0 nr_writeback 123 19 nr_slab_reclaimable 3375 3534 nr_slab_unreclaimable 11405 10665 nr_page_table_pages 8106 7864 nr_unstable 0 0 nr_bounce 0 0 *nr_vmscan_write 394776 230839 nr_writeback_temp 0 0 numa_hit 6843353 3318676 numa_miss 0 0 numa_foreign 0 0 numa_interleave 1719 1719 numa_local 6843353 3318676 numa_other 0 0 *pgpgin 5954683 2057175 *pgpgout 1578276 922744 *pswpin 1486615 512238 *pswpout 394568 230685 pgalloc_dma 277432 56602 pgalloc_dma32 6769477 3310348 pgalloc_normal 0 0 pgalloc_movable 0 0 pgfree 7048396 3371118 pgactivate 2036343 1471492 pgdeactivate 2189691 1612829 pgfault 3702176 3100702 *pgmajfault 452116 201343 pgrefill_dma 12185 7127 pgrefill_dma32 334384 653703 pgrefill_normal 0 0 pgrefill_movable 0 0 pgsteal_dma 74214 22179 pgsteal_dma32 3334164 1638029 pgsteal_normal 0 0 pgsteal_movable 0 0 pgscan_kswapd_dma 1081421 1216199 pgscan_kswapd_dma32 58979118 46002810 pgscan_kswapd_normal 0 0 pgscan_kswapd_movable 0 0 pgscan_direct_dma 2015438 1086109 pgscan_direct_dma32 55787823 36101597 pgscan_direct_normal 0 0 pgscan_direct_movable 0 0 pginodesteal 3461 7281 slabs_scanned 564864 527616 kswapd_steal 2889797 1448082 kswapd_inodesteal 14827 14835 pageoutrun 43459 21562 allocstall 9653 4032 pgrotated 384216 228631 1.5) free numbers at the end of the tests before patch: total used free shared buffers cached Mem: 474 467 7 0 0 236 -/+ buffers/cache: 230 243 Swap: 1023 418 605 after patch: total used free shared buffers cached Mem: 474 457 16 0 0 236 -/+ buffers/cache: 221 253 Swap: 1023 404 619 2) memory flushing in a file server 2.1) brief summary The number of major faults from 50 to 3 during 10% cache hot reads. That means this patch successfully stops major faults when the active file list is slowly scanned when there are partially cache hot streaming IO. 2.2) test scenario Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the pages will be activated: for i in `seq 0 100 10000000`; do echo $i 110; done > pattern-hot-10 iotrace.rb --load pattern-hot-10 --play /b/sparse vmmon nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree and monitor /proc/vmstat during the time. The test box has 2G memory. I carried out tests on fresh booted console as well as X desktop, and fetched the vmstat numbers on (1) begin: shortly after the big read IO starts; (2) end: just before the big read IO stops; (3) restore: the big read IO stops and the zsh working set restored (4) restore X: after IO, switch back and forth between the urxvt and firefox windows to restore their working set. 2.3) console mode results nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.29 VM_EXEC protection ON: begin: 2481 2237 8694 630 0 574299 end: 275 231976 233914 633 776271 20933042 restore: 370 232154 234524 691 777183 20958453 2.6.29 VM_EXEC protection ON (second run): begin: 2434 2237 8493 629 0 574195 end: 284 231970 233536 632 771918 20896129 restore: 399 232218 234789 690 774526 20957909 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 2479 2344 9659 210 0 579643 end: 284 232010 234142 260 772776 20917184 restore: 379 232159 234371 301 774888 20967849 The above console numbers show that - The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29. I'd attribute that improvement to the mmap readahead improvements :-) - The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50. That's a huge improvement - which means with the VM_EXEC protection logic, active mmap pages is pretty safe even under partially cache hot streaming IO. - when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8 under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree) That roughly means the active mmap pages get 20.8 more chances to get re-referenced to stay in memory. - The absolute nr_mapped drops considerably to 1/9 during the big IO, and the dropped pages are mostly inactive ones. The patch has almost no impact in this aspect, that means it won't unnecessarily increase memory pressure. (In contrast, your 20% mmap protection ratio will keep them all, and therefore eliminate the extra 41 major faults to restore working set of zsh etc.) The iotrace.rb read throughput is 151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse which means the inactive list is rotated at the speed of 250MB/s, so a full scan of which takes about 3.5 seconds, while a full scan of active file list takes about 77 seconds. 2.4) X mode results We can reach roughly the same conclusions for X desktop: nr_mapped nr_active_file nr_inactive_file pgmajfault pgdeactivate pgfree 2.6.30-rc4-mm VM_EXEC protection ON: begin: 9740 8920 64075 561 0 678360 end: 768 218254 220029 565 798953 21057006 restore: 857 218543 220987 606 799462 21075710 restore X: 2414 218560 225344 797 799462 21080795 2.6.30-rc4-mm VM_EXEC protection OFF: begin: 9368 5035 26389 554 0 633391 end: 770 218449 221230 661 646472 17832500 restore: 1113 218466 220978 710 649881 17905235 restore X: 2687 218650 225484 947 802700 21083584 - the absolute nr_mapped drops considerably (to 1/13 of the original size) during the streaming IO. - the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393 during the whole process. Cc: Elladan <elladan@eskimo.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Lameter <cl@linux-foundation.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:12 +04:00
* Count referenced pages from currently used mappings as rotated,
* even though only some of them are actually re-activated. This
* helps balance scan pressure between file and anonymous pages in
* get_scan_ratio.
*/
reclaim_stat->recent_rotated[file] += nr_rotated;
move_active_pages_to_lru(zone, &l_active,
LRU_ACTIVE + file * LRU_FILE);
move_active_pages_to_lru(zone, &l_inactive,
LRU_BASE + file * LRU_FILE);
__mod_zone_page_state(zone, NR_ISOLATED_ANON + file, -nr_taken);
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 12:55:45 +04:00
spin_unlock_irq(&zone->lru_lock);
}
static int inactive_anon_is_low_global(struct zone *zone)
{
unsigned long active, inactive;
active = zone_page_state(zone, NR_ACTIVE_ANON);
inactive = zone_page_state(zone, NR_INACTIVE_ANON);
if (inactive * zone->inactive_ratio < active)
return 1;
return 0;
}
/**
* inactive_anon_is_low - check if anonymous pages need to be deactivated
* @zone: zone to check
* @sc: scan control of this context
*
* Returns true if the zone does not have enough inactive anon pages,
* meaning some active anon pages need to be deactivated.
*/
static int inactive_anon_is_low(struct zone *zone, struct scan_control *sc)
{
int low;
if (scanning_global_lru(sc))
low = inactive_anon_is_low_global(zone);
else
low = mem_cgroup_inactive_anon_is_low(sc->mem_cgroup);
return low;
}
static int inactive_file_is_low_global(struct zone *zone)
{
unsigned long active, inactive;
active = zone_page_state(zone, NR_ACTIVE_FILE);
inactive = zone_page_state(zone, NR_INACTIVE_FILE);
return (active > inactive);
}
/**
* inactive_file_is_low - check if file pages need to be deactivated
* @zone: zone to check
* @sc: scan control of this context
*
* When the system is doing streaming IO, memory pressure here
* ensures that active file pages get deactivated, until more
* than half of the file pages are on the inactive list.
*
* Once we get to that situation, protect the system's working
* set from being evicted by disabling active file page aging.
*
* This uses a different ratio than the anonymous pages, because
* the page cache uses a use-once replacement algorithm.
*/
static int inactive_file_is_low(struct zone *zone, struct scan_control *sc)
{
int low;
if (scanning_global_lru(sc))
low = inactive_file_is_low_global(zone);
else
low = mem_cgroup_inactive_file_is_low(sc->mem_cgroup);
return low;
}
static int inactive_list_is_low(struct zone *zone, struct scan_control *sc,
int file)
{
if (file)
return inactive_file_is_low(zone, sc);
else
return inactive_anon_is_low(zone, sc);
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
struct zone *zone, struct scan_control *sc, int priority)
{
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
int file = is_file_lru(lru);
if (is_active_lru(lru)) {
if (inactive_list_is_low(zone, sc, file))
shrink_active_list(nr_to_scan, zone, sc, priority, file);
return 0;
}
return shrink_inactive_list(nr_to_scan, zone, sc, priority, file);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
}
/*
* Determine how aggressively the anon and file LRU lists should be
* scanned. The relative value of each set of LRU lists is determined
* by looking at the fraction of the pages scanned we did rotate back
* onto the active list instead of evict.
*
* percent[0] specifies how much pressure to put on ram/swap backed
* memory, while percent[1] determines pressure on the file LRUs.
*/
static void get_scan_ratio(struct zone *zone, struct scan_control *sc,
unsigned long *percent)
{
unsigned long anon, file, free;
unsigned long anon_prio, file_prio;
unsigned long ap, fp;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
/* If we have no swap space, do not bother scanning anon pages. */
if (!sc->may_swap || (nr_swap_pages <= 0)) {
percent[0] = 0;
percent[1] = 100;
return;
}
anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
if (scanning_global_lru(sc)) {
free = zone_page_state(zone, NR_FREE_PAGES);
/* If we have very few page cache pages,
force-scan anon pages. */
if (unlikely(file + free <= high_wmark_pages(zone))) {
percent[0] = 100;
percent[1] = 0;
return;
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
}
/*
* OK, so we have swap space and a fair amount of page cache
* pages. We use the recently rotated / recently scanned
* ratios to determine how valuable each cache is.
*
* Because workloads change over time (and to avoid overflow)
* we keep these statistics as a floating average, which ends
* up weighing recent references more than old ones.
*
* anon in [0], file in [1]
*/
if (unlikely(reclaim_stat->recent_scanned[0] > anon / 4)) {
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
spin_lock_irq(&zone->lru_lock);
reclaim_stat->recent_scanned[0] /= 2;
reclaim_stat->recent_rotated[0] /= 2;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
spin_unlock_irq(&zone->lru_lock);
}
if (unlikely(reclaim_stat->recent_scanned[1] > file / 4)) {
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
spin_lock_irq(&zone->lru_lock);
reclaim_stat->recent_scanned[1] /= 2;
reclaim_stat->recent_rotated[1] /= 2;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
spin_unlock_irq(&zone->lru_lock);
}
/*
* With swappiness at 100, anonymous and file have the same priority.
* This scanning priority is essentially the inverse of IO cost.
*/
anon_prio = sc->swappiness;
file_prio = 200 - sc->swappiness;
/*
* The amount of pressure on anon vs file pages is inversely
* proportional to the fraction of recently scanned pages on
* each list that were recently referenced and in active use.
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
*/
ap = (anon_prio + 1) * (reclaim_stat->recent_scanned[0] + 1);
ap /= reclaim_stat->recent_rotated[0] + 1;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
fp = (file_prio + 1) * (reclaim_stat->recent_scanned[1] + 1);
fp /= reclaim_stat->recent_rotated[1] + 1;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
/* Normalize to percentages */
percent[0] = 100 * ap / (ap + fp + 1);
percent[1] = 100 - percent[0];
}
/*
* Smallish @nr_to_scan's are deposited in @nr_saved_scan,
* until we collected @swap_cluster_max pages to scan.
*/
static unsigned long nr_scan_try_batch(unsigned long nr_to_scan,
unsigned long *nr_saved_scan)
{
unsigned long nr;
*nr_saved_scan += nr_to_scan;
nr = *nr_saved_scan;
if (nr >= SWAP_CLUSTER_MAX)
*nr_saved_scan = 0;
else
nr = 0;
return nr;
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
/*
* This is a basic per-zone page freer. Used by both kswapd and direct reclaim.
*/
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
static void shrink_zone(int priority, struct zone *zone,
struct scan_control *sc)
{
unsigned long nr[NR_LRU_LISTS];
unsigned long nr_to_scan;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
unsigned long percent[2]; /* anon @ 0; file @ 1 */
enum lru_list l;
vmscan: improve reclaim throughput to bail out patch The vmscan bail out patch move nr_reclaimed variable to struct scan_control. Unfortunately, indirect access can easily happen cache miss. if heavy memory pressure happend, that's ok. cache miss already plenty. it is not observable. but, if memory pressure is lite, performance degression is obserbable. I compared following three pattern (it was mesured 10 times each) hackbench 125 process 3000 hackbench 130 process 3000 hackbench 135 process 3000 2.6.28-rc6 bail-out 125 130 135 125 130 135 ============================================================== 71.866 75.86 81.274 93.414 73.254 193.382 74.145 78.295 77.27 74.897 75.021 80.17 70.305 77.643 75.855 70.134 77.571 79.896 74.288 73.986 75.955 77.222 78.48 80.619 72.029 79.947 78.312 75.128 82.172 79.708 71.499 77.615 77.042 74.177 76.532 77.306 76.188 74.471 83.562 73.839 72.43 79.833 73.236 75.606 78.743 76.001 76.557 82.726 69.427 77.271 76.691 76.236 79.371 103.189 72.473 76.978 80.643 69.128 78.932 75.736 avg 72.545 76.767 78.534 76.017 77.03 93.256 std 1.89 1.71 2.41 6.29 2.79 34.16 min 69.427 73.986 75.855 69.128 72.43 75.736 max 76.188 79.947 83.562 93.414 82.172 193.382 about 4-5% degression. Then, this patch introduces a temporary local variable. result: 2.6.28-rc6 this patch num 125 130 135 125 130 135 ============================================================== 71.866 75.86 81.274 67.302 68.269 77.161 74.145 78.295 77.27 72.616 72.712 79.06 70.305 77.643 75.855 72.475 75.712 77.735 74.288 73.986 75.955 69.229 73.062 78.814 72.029 79.947 78.312 71.551 74.392 78.564 71.499 77.615 77.042 69.227 74.31 78.837 76.188 74.471 83.562 70.759 75.256 76.6 73.236 75.606 78.743 69.966 76.001 78.464 69.427 77.271 76.691 69.068 75.218 80.321 72.473 76.978 80.643 72.057 77.151 79.068 avg 72.545 76.767 78.534 70.425 74.2083 78.462 std 1.89 1.71 2.41 1.66 2.34 1.00 min 69.427 73.986 75.855 67.302 68.269 76.6 max 76.188 79.947 83.562 72.616 77.151 80.321 OK. the degression is disappeared. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:02 +03:00
unsigned long nr_reclaimed = sc->nr_reclaimed;
unsigned long nr_to_reclaim = sc->nr_to_reclaim;
mm: do batched scans for mem_cgroup For mem_cgroup, shrink_zone() may call shrink_list() with nr_to_scan=1, in which case shrink_list() _still_ calls isolate_pages() with the much larger SWAP_CLUSTER_MAX. It effectively scales up the inactive list scan rate by up to 32 times. For example, with 16k inactive pages and DEF_PRIORITY=12, (16k >> 12)=4. So when shrink_zone() expects to scan 4 pages in the active/inactive list, the active list will be scanned 4 pages, while the inactive list will be (over) scanned SWAP_CLUSTER_MAX=32 pages in effect. And that could break the balance between the two lists. It can further impact the scan of anon active list, due to the anon active/inactive ratio rebalance logic in balance_pgdat()/shrink_zone(): inactive anon list over scanned => inactive_anon_is_low() == TRUE => shrink_active_list() => active anon list over scanned So the end result may be - anon inactive => over scanned - anon active => over scanned (maybe not as much) - file inactive => over scanned - file active => under scanned (relatively) The accesses to nr_saved_scan are not lock protected and so not 100% accurate, however we can tolerate small errors and the resulted small imbalanced scan rates between zones. Cc: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 04:03:11 +04:00
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
get_scan_ratio(zone, sc, percent);
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
for_each_evictable_lru(l) {
int file = is_file_lru(l);
unsigned long scan;
if (percent[file] == 0) {
nr[l] = 0;
continue;
}
scan = zone_nr_lru_pages(zone, sc, l);
if (priority) {
scan >>= priority;
scan = (scan * percent[file]) / 100;
}
mm: do batched scans for mem_cgroup For mem_cgroup, shrink_zone() may call shrink_list() with nr_to_scan=1, in which case shrink_list() _still_ calls isolate_pages() with the much larger SWAP_CLUSTER_MAX. It effectively scales up the inactive list scan rate by up to 32 times. For example, with 16k inactive pages and DEF_PRIORITY=12, (16k >> 12)=4. So when shrink_zone() expects to scan 4 pages in the active/inactive list, the active list will be scanned 4 pages, while the inactive list will be (over) scanned SWAP_CLUSTER_MAX=32 pages in effect. And that could break the balance between the two lists. It can further impact the scan of anon active list, due to the anon active/inactive ratio rebalance logic in balance_pgdat()/shrink_zone(): inactive anon list over scanned => inactive_anon_is_low() == TRUE => shrink_active_list() => active anon list over scanned So the end result may be - anon inactive => over scanned - anon active => over scanned (maybe not as much) - file inactive => over scanned - file active => under scanned (relatively) The accesses to nr_saved_scan are not lock protected and so not 100% accurate, however we can tolerate small errors and the resulted small imbalanced scan rates between zones. Cc: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 04:03:11 +04:00
nr[l] = nr_scan_try_batch(scan,
&reclaim_stat->nr_saved_scan[l]);
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
}
while (nr[LRU_INACTIVE_ANON] || nr[LRU_ACTIVE_FILE] ||
nr[LRU_INACTIVE_FILE]) {
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
for_each_evictable_lru(l) {
if (nr[l]) {
nr_to_scan = min_t(unsigned long,
nr[l], SWAP_CLUSTER_MAX);
nr[l] -= nr_to_scan;
vmscan: improve reclaim throughput to bail out patch The vmscan bail out patch move nr_reclaimed variable to struct scan_control. Unfortunately, indirect access can easily happen cache miss. if heavy memory pressure happend, that's ok. cache miss already plenty. it is not observable. but, if memory pressure is lite, performance degression is obserbable. I compared following three pattern (it was mesured 10 times each) hackbench 125 process 3000 hackbench 130 process 3000 hackbench 135 process 3000 2.6.28-rc6 bail-out 125 130 135 125 130 135 ============================================================== 71.866 75.86 81.274 93.414 73.254 193.382 74.145 78.295 77.27 74.897 75.021 80.17 70.305 77.643 75.855 70.134 77.571 79.896 74.288 73.986 75.955 77.222 78.48 80.619 72.029 79.947 78.312 75.128 82.172 79.708 71.499 77.615 77.042 74.177 76.532 77.306 76.188 74.471 83.562 73.839 72.43 79.833 73.236 75.606 78.743 76.001 76.557 82.726 69.427 77.271 76.691 76.236 79.371 103.189 72.473 76.978 80.643 69.128 78.932 75.736 avg 72.545 76.767 78.534 76.017 77.03 93.256 std 1.89 1.71 2.41 6.29 2.79 34.16 min 69.427 73.986 75.855 69.128 72.43 75.736 max 76.188 79.947 83.562 93.414 82.172 193.382 about 4-5% degression. Then, this patch introduces a temporary local variable. result: 2.6.28-rc6 this patch num 125 130 135 125 130 135 ============================================================== 71.866 75.86 81.274 67.302 68.269 77.161 74.145 78.295 77.27 72.616 72.712 79.06 70.305 77.643 75.855 72.475 75.712 77.735 74.288 73.986 75.955 69.229 73.062 78.814 72.029 79.947 78.312 71.551 74.392 78.564 71.499 77.615 77.042 69.227 74.31 78.837 76.188 74.471 83.562 70.759 75.256 76.6 73.236 75.606 78.743 69.966 76.001 78.464 69.427 77.271 76.691 69.068 75.218 80.321 72.473 76.978 80.643 72.057 77.151 79.068 avg 72.545 76.767 78.534 70.425 74.2083 78.462 std 1.89 1.71 2.41 1.66 2.34 1.00 min 69.427 73.986 75.855 67.302 68.269 76.6 max 76.188 79.947 83.562 72.616 77.151 80.321 OK. the degression is disappeared. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:02 +03:00
nr_reclaimed += shrink_list(l, nr_to_scan,
zone, sc, priority);
}
}
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
/*
* On large memory systems, scan >> priority can become
* really large. This is fine for the starting priority;
* we want to put equal scanning pressure on each zone.
* However, if the VM has a harder time of freeing pages,
* with multiple processes reclaiming pages, the total
* freeing target can get unreasonably large.
*/
if (nr_reclaimed >= nr_to_reclaim && priority < DEF_PRIORITY)
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
break;
}
vmscan: improve reclaim throughput to bail out patch The vmscan bail out patch move nr_reclaimed variable to struct scan_control. Unfortunately, indirect access can easily happen cache miss. if heavy memory pressure happend, that's ok. cache miss already plenty. it is not observable. but, if memory pressure is lite, performance degression is obserbable. I compared following three pattern (it was mesured 10 times each) hackbench 125 process 3000 hackbench 130 process 3000 hackbench 135 process 3000 2.6.28-rc6 bail-out 125 130 135 125 130 135 ============================================================== 71.866 75.86 81.274 93.414 73.254 193.382 74.145 78.295 77.27 74.897 75.021 80.17 70.305 77.643 75.855 70.134 77.571 79.896 74.288 73.986 75.955 77.222 78.48 80.619 72.029 79.947 78.312 75.128 82.172 79.708 71.499 77.615 77.042 74.177 76.532 77.306 76.188 74.471 83.562 73.839 72.43 79.833 73.236 75.606 78.743 76.001 76.557 82.726 69.427 77.271 76.691 76.236 79.371 103.189 72.473 76.978 80.643 69.128 78.932 75.736 avg 72.545 76.767 78.534 76.017 77.03 93.256 std 1.89 1.71 2.41 6.29 2.79 34.16 min 69.427 73.986 75.855 69.128 72.43 75.736 max 76.188 79.947 83.562 93.414 82.172 193.382 about 4-5% degression. Then, this patch introduces a temporary local variable. result: 2.6.28-rc6 this patch num 125 130 135 125 130 135 ============================================================== 71.866 75.86 81.274 67.302 68.269 77.161 74.145 78.295 77.27 72.616 72.712 79.06 70.305 77.643 75.855 72.475 75.712 77.735 74.288 73.986 75.955 69.229 73.062 78.814 72.029 79.947 78.312 71.551 74.392 78.564 71.499 77.615 77.042 69.227 74.31 78.837 76.188 74.471 83.562 70.759 75.256 76.6 73.236 75.606 78.743 69.966 76.001 78.464 69.427 77.271 76.691 69.068 75.218 80.321 72.473 76.978 80.643 72.057 77.151 79.068 avg 72.545 76.767 78.534 70.425 74.2083 78.462 std 1.89 1.71 2.41 1.66 2.34 1.00 min 69.427 73.986 75.855 67.302 68.269 76.6 max 76.188 79.947 83.562 72.616 77.151 80.321 OK. the degression is disappeared. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:02 +03:00
sc->nr_reclaimed = nr_reclaimed;
/*
* Even if we did not try to evict anon pages at all, we want to
* rebalance the anon lru active/inactive ratio.
*/
if (inactive_anon_is_low(zone, sc) && nr_swap_pages > 0)
shrink_active_list(SWAP_CLUSTER_MAX, zone, sc, priority, 0);
throttle_vm_writeout(sc->gfp_mask);
}
/*
* This is the direct reclaim path, for page-allocating processes. We only
* try to reclaim pages from zones which will satisfy the caller's allocation
* request.
*
* We reclaim from a zone even if that zone is over high_wmark_pages(zone).
* Because:
* a) The caller may be trying to free *extra* pages to satisfy a higher-order
* allocation or
* b) The target zone may be at high_wmark_pages(zone) but the lower zones
* must go *over* high_wmark_pages(zone) to satisfy the `incremental min'
* zone defense algorithm.
*
* If a zone is deemed to be full of pinned pages then just give it a light
* scan then give up on it.
*/
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
static void shrink_zones(int priority, struct zonelist *zonelist,
struct scan_control *sc)
{
enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:17 +04:00
struct zoneref *z;
struct zone *zone;
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
sc->all_unreclaimable = 1;
for_each_zone_zonelist_nodemask(zone, z, zonelist, high_zoneidx,
sc->nodemask) {
if (!populated_zone(zone))
continue;
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
/*
* Take care memory controller reclaiming has small influence
* to global LRU.
*/
if (scanning_global_lru(sc)) {
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
continue;
note_zone_scanning_priority(zone, priority);
if (zone->all_unreclaimable && priority != DEF_PRIORITY)
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
continue; /* Let kswapd poll it */
sc->all_unreclaimable = 0;
} else {
/*
* Ignore cpuset limitation here. We just want to reduce
* # of used pages by us regardless of memory shortage.
*/
sc->all_unreclaimable = 0;
mem_cgroup_note_reclaim_priority(sc->mem_cgroup,
priority);
}
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
shrink_zone(priority, zone, sc);
}
}
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
/*
* This is the main entry point to direct page reclaim.
*
* If a full scan of the inactive list fails to free enough memory then we
* are "out of memory" and something needs to be killed.
*
* If the caller is !__GFP_FS then the probability of a failure is reasonably
* high - the zone may be full of dirty or under-writeback pages, which this
* caller can't do much about. We kick the writeback threads and take explicit
* naps in the hope that some of these pages can be written. But if the
* allocating task holds filesystem locks which prevent writeout this might not
* work, and the allocation attempt will fail.
page allocator: smarter retry of costly-order allocations Because of page order checks in __alloc_pages(), hugepage (and similarly large order) allocations will not retry unless explicitly marked __GFP_REPEAT. However, the current retry logic is nearly an infinite loop (or until reclaim does no progress whatsoever). For these costly allocations, that seems like overkill and could potentially never terminate. Mel observed that allowing current __GFP_REPEAT semantics for hugepage allocations essentially killed the system. I believe this is because we may continue to reclaim small orders of pages all over, but never have enough to satisfy the hugepage allocation request. This is clearly only a problem for large order allocations, of which hugepages are the most obvious (to me). Modify try_to_free_pages() to indicate how many pages were reclaimed. Use that information in __alloc_pages() to eventually fail a large __GFP_REPEAT allocation when we've reclaimed an order of pages equal to or greater than the allocation's order. This relies on lumpy reclaim functioning as advertised. Due to fragmentation, lumpy reclaim may not be able to free up the order needed in one invocation, so multiple iterations may be requred. In other words, the more fragmented memory is, the more retry attempts __GFP_REPEAT will make (particularly for higher order allocations). This changes the semantics of __GFP_REPEAT subtly, but *only* for allocations > PAGE_ALLOC_COSTLY_ORDER. With this patch, for those size allocations, we will try up to some point (at least 1<<order reclaimed pages), rather than forever (which is the case for allocations <= PAGE_ALLOC_COSTLY_ORDER). This change improves the /proc/sys/vm/nr_hugepages interface with a follow-on patch that makes pool allocations use __GFP_REPEAT. Rather than administrators repeatedly echo'ing a particular value into the sysctl, and forcing reclaim into action manually, this change allows for the sysctl to attempt a reasonable effort itself. Similarly, dynamic pool growth should be more successful under load, as lumpy reclaim can try to free up pages, rather than failing right away. Choosing to reclaim only up to the order of the requested allocation strikes a balance between not failing hugepage allocations and returning to the caller when it's unlikely to every succeed. Because of lumpy reclaim, if we have freed the order requested, hopefully it has been in big chunks and those chunks will allow our allocation to succeed. If that isn't the case after freeing up the current order, I don't think it is likely to succeed in the future, although it is possible given a particular fragmentation pattern. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Tested-by: Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 11:58:25 +04:00
*
* returns: 0, if no pages reclaimed
* else, the number of pages reclaimed
*/
mm: use zonelists instead of zones when direct reclaiming pages The following patches replace multiple zonelists per node with two zonelists that are filtered based on the GFP flags. The patches as a set fix a bug with regard to the use of MPOL_BIND and ZONE_MOVABLE. With this patchset, the MPOL_BIND will apply to the two highest zones when the highest zone is ZONE_MOVABLE. This should be considered as an alternative fix for the MPOL_BIND+ZONE_MOVABLE in 2.6.23 to the previously discussed hack that filters only custom zonelists. The first patch cleans up an inconsistency where direct reclaim uses zonelist->zones where other places use zonelist. The second patch introduces a helper function node_zonelist() for looking up the appropriate zonelist for a GFP mask which simplifies patches later in the set. The third patch defines/remembers the "preferred zone" for numa statistics, as it is no longer always the first zone in a zonelist. The forth patch replaces multiple zonelists with two zonelists that are filtered. The two zonelists are due to the fact that the memoryless patchset introduces a second set of zonelists for __GFP_THISNODE. The fifth patch introduces helper macros for retrieving the zone and node indices of entries in a zonelist. The final patch introduces filtering of the zonelists based on a nodemask. Two zonelists exist per node, one for normal allocations and one for __GFP_THISNODE. Performance results varied depending on the machine configuration. In real workloads the gain/loss will depend on how much the userspace portion of the benchmark benefits from having more cache available due to reduced referencing of zonelists. These are the range of performance losses/gains when running against 2.6.24-rc4-mm1. The set and these machines are a mix of i386, x86_64 and ppc64 both NUMA and non-NUMA. loss to gain Total CPU time on Kernbench: -0.86% to 1.13% Elapsed time on Kernbench: -0.79% to 0.76% page_test from aim9: -4.37% to 0.79% brk_test from aim9: -0.71% to 4.07% fork_test from aim9: -1.84% to 4.60% exec_test from aim9: -0.71% to 1.08% This patch: The allocator deals with zonelists which indicate the order in which zones should be targeted for an allocation. Similarly, direct reclaim of pages iterates over an array of zones. For consistency, this patch converts direct reclaim to use a zonelist. No functionality is changed by this patch. This simplifies zonelist iterators in the next patch. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:12 +04:00
static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:17 +04:00
struct scan_control *sc)
{
int priority;
unsigned long ret = 0;
unsigned long total_scanned = 0;
struct reclaim_state *reclaim_state = current->reclaim_state;
unsigned long lru_pages = 0;
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:17 +04:00
struct zoneref *z;
struct zone *zone;
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:17 +04:00
enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
unsigned long writeback_threshold;
per-task-delay-accounting: add memory reclaim delay Sometimes, application responses become bad under heavy memory load. Applications take a bit time to reclaim memory. The statistics, how long memory reclaim takes, will be useful to measure memory usage. This patch adds accounting memory reclaim to per-task-delay-accounting for accounting the time of do_try_to_free_pages(). <i.e> - When System is under low memory load, memory reclaim may not occur. $ free total used free shared buffers cached Mem: 8197800 1577300 6620500 0 4808 1516724 -/+ buffers/cache: 55768 8142032 Swap: 16386292 0 16386292 $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 5069748 10612 3014060 0 0 0 0 3 26 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 4 22 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 3 18 0 0 100 0 Measure the time of tar command. $ ls -s test.dat 1501472 test.dat $ time tar cvf test.tar test.dat real 0m13.388s user 0m0.116s sys 0m5.304s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 428 5528345500 5477116080 62749891 IO count delay total 338 8078977189 SWAP count delay total 0 0 RECLAIM count delay total 0 0 - When system is under heavy memory load memory reclaim may occur. $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 7159032 49724 1812 3012 0 0 0 0 3 24 0 0 100 0 0 0 7159032 49724 1812 3012 0 0 0 0 4 24 0 0 100 0 0 0 7159032 49848 1812 3012 0 0 0 0 3 22 0 0 100 0 In this case, one process uses more 8G memory by execution of malloc() and memset(). $ time tar cvf test.tar test.dat real 1m38.563s <- increased by 85 sec user 0m0.140s sys 0m7.060s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 9021 7140446250 7315277975 923201824 IO count delay total 8965 90466349669 SWAP count delay total 3 21036367 RECLAIM count delay total 740 61011951153 In the later case, the value of RECLAIM is increasing. So, taskstats can show how much memory reclaim influences TAT. Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:48:52 +04:00
delayacct_freepages_start();
if (scanning_global_lru(sc))
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
count_vm_event(ALLOCSTALL);
/*
* mem_cgroup will not do shrink_slab.
*/
if (scanning_global_lru(sc)) {
for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) {
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
continue;
lru_pages += zone_reclaimable_pages(zone);
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
}
}
for (priority = DEF_PRIORITY; priority >= 0; priority--) {
sc->nr_scanned = 0;
if (!priority)
disable_swap_token();
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
shrink_zones(priority, zonelist, sc);
/*
* Don't shrink slabs when reclaiming memory from
* over limit cgroups
*/
if (scanning_global_lru(sc)) {
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:17 +04:00
shrink_slab(sc->nr_scanned, sc->gfp_mask, lru_pages);
if (reclaim_state) {
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
sc->nr_reclaimed += reclaim_state->reclaimed_slab;
reclaim_state->reclaimed_slab = 0;
}
}
total_scanned += sc->nr_scanned;
if (sc->nr_reclaimed >= sc->nr_to_reclaim) {
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
ret = sc->nr_reclaimed;
goto out;
}
/*
* Try to write back as many pages as we just scanned. This
* tends to cause slow streaming writers to write data to the
* disk smoothly, at the dirtying rate, which is nice. But
* that's undesirable in laptop mode, where we *want* lumpy
* writeout. So in laptop mode, write out the whole world.
*/
writeback_threshold = sc->nr_to_reclaim + sc->nr_to_reclaim / 2;
if (total_scanned > writeback_threshold) {
writeback: switch to per-bdi threads for flushing data This gets rid of pdflush for bdi writeout and kupdated style cleaning. pdflush writeout suffers from lack of locality and also requires more threads to handle the same workload, since it has to work in a non-blocking fashion against each queue. This also introduces lumpy behaviour and potential request starvation, since pdflush can be starved for queue access if others are accessing it. A sample ffsb workload that does random writes to files is about 8% faster here on a simple SATA drive during the benchmark phase. File layout also seems a LOT more smooth in vmstat: r b swpd free buff cache si so bi bo in cs us sy id wa 0 1 0 608848 2652 375372 0 0 0 71024 604 24 1 10 48 42 0 1 0 549644 2712 433736 0 0 0 60692 505 27 1 8 48 44 1 0 0 476928 2784 505192 0 0 4 29540 553 24 0 9 53 37 0 1 0 457972 2808 524008 0 0 0 54876 331 16 0 4 38 58 0 1 0 366128 2928 614284 0 0 4 92168 710 58 0 13 53 34 0 1 0 295092 3000 684140 0 0 0 62924 572 23 0 9 53 37 0 1 0 236592 3064 741704 0 0 4 58256 523 17 0 8 48 44 0 1 0 165608 3132 811464 0 0 0 57460 560 21 0 8 54 38 0 1 0 102952 3200 873164 0 0 4 74748 540 29 1 10 48 41 0 1 0 48604 3252 926472 0 0 0 53248 469 29 0 7 47 45 where vanilla tends to fluctuate a lot in the creation phase: r b swpd free buff cache si so bi bo in cs us sy id wa 1 1 0 678716 5792 303380 0 0 0 74064 565 50 1 11 52 36 1 0 0 662488 5864 319396 0 0 4 352 302 329 0 2 47 51 0 1 0 599312 5924 381468 0 0 0 78164 516 55 0 9 51 40 0 1 0 519952 6008 459516 0 0 4 78156 622 56 1 11 52 37 1 1 0 436640 6092 541632 0 0 0 82244 622 54 0 11 48 41 0 1 0 436640 6092 541660 0 0 0 8 152 39 0 0 51 49 0 1 0 332224 6200 644252 0 0 4 102800 728 46 1 13 49 36 1 0 0 274492 6260 701056 0 0 4 12328 459 49 0 7 50 43 0 1 0 211220 6324 763356 0 0 0 106940 515 37 1 10 51 39 1 0 0 160412 6376 813468 0 0 0 8224 415 43 0 6 49 45 1 1 0 85980 6452 886556 0 0 4 113516 575 39 1 11 54 34 0 2 0 85968 6452 886620 0 0 0 1640 158 211 0 0 46 54 A 10 disk test with btrfs performs 26% faster with per-bdi flushing. A SSD based writeback test on XFS performs over 20% better as well, with the throughput being very stable around 1GB/sec, where pdflush only manages 750MB/sec and fluctuates wildly while doing so. Random buffered writes to many files behave a lot better as well, as does random mmap'ed writes. A separate thread is added to sync the super blocks. In the long term, adding sync_supers_bdi() functionality could get rid of this thread again. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-09 11:08:54 +04:00
wakeup_flusher_threads(laptop_mode ? 0 : total_scanned);
sc->may_writepage = 1;
}
/* Take a nap, wait for some writeback to complete */
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
if (!sc->hibernation_mode && sc->nr_scanned &&
priority < DEF_PRIORITY - 2)
congestion_wait(BLK_RW_ASYNC, HZ/10);
}
/* top priority shrink_zones still had more to do? don't OOM, then */
if (!sc->all_unreclaimable && scanning_global_lru(sc))
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
ret = sc->nr_reclaimed;
out:
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
/*
* Now that we've scanned all the zones at this priority level, note
* that level within the zone so that the next thread which performs
* scanning of this zone will immediately start out at this priority
* level. This affects only the decision whether or not to bring
* mapped pages onto the inactive list.
*/
if (priority < 0)
priority = 0;
if (scanning_global_lru(sc)) {
for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) {
per-zone and reclaim enhancements for memory controller: modifies vmscan.c for isolate globa/cgroup lru activity When using memory controller, there are 2 levels of memory reclaim. 1. zone memory reclaim because of system/zone memory shortage. 2. memory cgroup memory reclaim because of hitting limit. These two can be distinguished by sc->mem_cgroup parameter. (scan_global_lru() macro) This patch tries to make memory cgroup reclaim routine avoid affecting system/zone memory reclaim. This patch inserts if (scan_global_lru()) and hook to memory_cgroup reclaim support functions. This patch can be a help for isolating system lru activity and group lru activity and shows what additional functions are necessary. * mem_cgroup_calc_mapped_ratio() ... calculate mapped ratio for cgroup. * mem_cgroup_reclaim_imbalance() ... calculate active/inactive balance in cgroup. * mem_cgroup_calc_reclaim_active() ... calculate the number of active pages to be scanned in this priority in mem_cgroup. * mem_cgroup_calc_reclaim_inactive() ... calculate the number of inactive pages to be scanned in this priority in mem_cgroup. * mem_cgroup_all_unreclaimable() .. checks cgroup's page is all unreclaimable or not. * mem_cgroup_get_reclaim_priority() ... * mem_cgroup_note_reclaim_priority() ... record reclaim priority (temporal) * mem_cgroup_remember_reclaim_priority() .... record reclaim priority as zone->prev_priority. This value is used for calc reclaim_mapped. [akpm@linux-foundation.org: fix unused var warning] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:37 +03:00
if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
continue;
zone->prev_priority = priority;
}
} else
mem_cgroup_record_reclaim_priority(sc->mem_cgroup, priority);
per-task-delay-accounting: add memory reclaim delay Sometimes, application responses become bad under heavy memory load. Applications take a bit time to reclaim memory. The statistics, how long memory reclaim takes, will be useful to measure memory usage. This patch adds accounting memory reclaim to per-task-delay-accounting for accounting the time of do_try_to_free_pages(). <i.e> - When System is under low memory load, memory reclaim may not occur. $ free total used free shared buffers cached Mem: 8197800 1577300 6620500 0 4808 1516724 -/+ buffers/cache: 55768 8142032 Swap: 16386292 0 16386292 $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 5069748 10612 3014060 0 0 0 0 3 26 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 4 22 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 3 18 0 0 100 0 Measure the time of tar command. $ ls -s test.dat 1501472 test.dat $ time tar cvf test.tar test.dat real 0m13.388s user 0m0.116s sys 0m5.304s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 428 5528345500 5477116080 62749891 IO count delay total 338 8078977189 SWAP count delay total 0 0 RECLAIM count delay total 0 0 - When system is under heavy memory load memory reclaim may occur. $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 7159032 49724 1812 3012 0 0 0 0 3 24 0 0 100 0 0 0 7159032 49724 1812 3012 0 0 0 0 4 24 0 0 100 0 0 0 7159032 49848 1812 3012 0 0 0 0 3 22 0 0 100 0 In this case, one process uses more 8G memory by execution of malloc() and memset(). $ time tar cvf test.tar test.dat real 1m38.563s <- increased by 85 sec user 0m0.140s sys 0m7.060s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 9021 7140446250 7315277975 923201824 IO count delay total 8965 90466349669 SWAP count delay total 3 21036367 RECLAIM count delay total 740 61011951153 In the later case, the value of RECLAIM is increasing. So, taskstats can show how much memory reclaim influences TAT. Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:48:52 +04:00
delayacct_freepages_end();
return ret;
}
mm: use zonelists instead of zones when direct reclaiming pages The following patches replace multiple zonelists per node with two zonelists that are filtered based on the GFP flags. The patches as a set fix a bug with regard to the use of MPOL_BIND and ZONE_MOVABLE. With this patchset, the MPOL_BIND will apply to the two highest zones when the highest zone is ZONE_MOVABLE. This should be considered as an alternative fix for the MPOL_BIND+ZONE_MOVABLE in 2.6.23 to the previously discussed hack that filters only custom zonelists. The first patch cleans up an inconsistency where direct reclaim uses zonelist->zones where other places use zonelist. The second patch introduces a helper function node_zonelist() for looking up the appropriate zonelist for a GFP mask which simplifies patches later in the set. The third patch defines/remembers the "preferred zone" for numa statistics, as it is no longer always the first zone in a zonelist. The forth patch replaces multiple zonelists with two zonelists that are filtered. The two zonelists are due to the fact that the memoryless patchset introduces a second set of zonelists for __GFP_THISNODE. The fifth patch introduces helper macros for retrieving the zone and node indices of entries in a zonelist. The final patch introduces filtering of the zonelists based on a nodemask. Two zonelists exist per node, one for normal allocations and one for __GFP_THISNODE. Performance results varied depending on the machine configuration. In real workloads the gain/loss will depend on how much the userspace portion of the benchmark benefits from having more cache available due to reduced referencing of zonelists. These are the range of performance losses/gains when running against 2.6.24-rc4-mm1. The set and these machines are a mix of i386, x86_64 and ppc64 both NUMA and non-NUMA. loss to gain Total CPU time on Kernbench: -0.86% to 1.13% Elapsed time on Kernbench: -0.79% to 0.76% page_test from aim9: -4.37% to 0.79% brk_test from aim9: -0.71% to 4.07% fork_test from aim9: -1.84% to 4.60% exec_test from aim9: -0.71% to 1.08% This patch: The allocator deals with zonelists which indicate the order in which zones should be targeted for an allocation. Similarly, direct reclaim of pages iterates over an array of zones. For consistency, this patch converts direct reclaim to use a zonelist. No functionality is changed by this patch. This simplifies zonelist iterators in the next patch. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:12 +04:00
unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
gfp_t gfp_mask, nodemask_t *nodemask)
{
struct scan_control sc = {
.gfp_mask = gfp_mask,
.may_writepage = !laptop_mode,
.nr_to_reclaim = SWAP_CLUSTER_MAX,
.may_unmap = 1,
.may_swap = 1,
.swappiness = vm_swappiness,
.order = order,
.mem_cgroup = NULL,
.isolate_pages = isolate_pages_global,
.nodemask = nodemask,
};
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:17 +04:00
return do_try_to_free_pages(zonelist, &sc);
}
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
2009-09-24 02:56:39 +04:00
unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
gfp_t gfp_mask, bool noswap,
unsigned int swappiness,
struct zone *zone, int nid)
{
struct scan_control sc = {
.may_writepage = !laptop_mode,
.may_unmap = 1,
.may_swap = !noswap,
.swappiness = swappiness,
.order = 0,
.mem_cgroup = mem,
.isolate_pages = mem_cgroup_isolate_pages,
};
nodemask_t nm = nodemask_of_node(nid);
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
sc.nodemask = &nm;
sc.nr_reclaimed = 0;
sc.nr_scanned = 0;
/*
* NOTE: Although we can get the priority field, using it
* here is not a good idea, since it limits the pages we can scan.
* if we don't reclaim here, the shrink_zone from balance_pgdat
* will pick up pages from other mem cgroup's as well. We hack
* the priority and make it zero.
*/
shrink_zone(0, zone, &sc);
return sc.nr_reclaimed;
}
unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
gfp_t gfp_mask,
bool noswap,
unsigned int swappiness)
{
2009-09-24 02:56:39 +04:00
struct zonelist *zonelist;
struct scan_control sc = {
.may_writepage = !laptop_mode,
.may_unmap = 1,
.may_swap = !noswap,
.nr_to_reclaim = SWAP_CLUSTER_MAX,
.swappiness = swappiness,
.order = 0,
.mem_cgroup = mem_cont,
.isolate_pages = mem_cgroup_isolate_pages,
.nodemask = NULL, /* we don't care the placement */
};
mm: have zonelist contains structs with both a zone pointer and zone_idx Filtering zonelists requires very frequent use of zone_idx(). This is costly as it involves a lookup of another structure and a substraction operation. As the zone_idx is often required, it should be quickly accessible. The node idx could also be stored here if it was found that accessing zone->node is significant which may be the case on workloads where nodemasks are heavily used. This patch introduces a struct zoneref to store a zone pointer and a zone index. The zonelist then consists of an array of these struct zonerefs which are looked up as necessary. Helpers are given for accessing the zone index as well as the node index. [kamezawa.hiroyu@jp.fujitsu.com: Suggested struct zoneref instead of embedding information in pointers] [hugh@veritas.com: mm-have-zonelist: fix memcg ooms] [hugh@veritas.com: just return do_try_to_free_pages] [hugh@veritas.com: do_try_to_free_pages gfp_mask redundant] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:17 +04:00
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
zonelist = NODE_DATA(numa_node_id())->node_zonelists;
return do_try_to_free_pages(zonelist, &sc);
}
#endif
/* is kswapd sleeping prematurely? */
static int sleeping_prematurely(pg_data_t *pgdat, int order, long remaining)
{
int i;
/* If a direct reclaimer woke kswapd within HZ/10, it's premature */
if (remaining)
return 1;
/* If after HZ/10, a zone is below the high mark, it's premature */
for (i = 0; i < pgdat->nr_zones; i++) {
struct zone *zone = pgdat->node_zones + i;
if (!populated_zone(zone))
continue;
if (zone->all_unreclaimable)
continue;
if (!zone_watermark_ok(zone, order, high_wmark_pages(zone),
0, 0))
return 1;
}
return 0;
}
/*
* For kswapd, balance_pgdat() will work across all this node's zones until
* they are all at high_wmark_pages(zone).
*
* Returns the number of pages which were actually freed.
*
* There is special handling here for zones which are full of pinned pages.
* This can happen if the pages are all mlocked, or if they are all used by
* device drivers (say, ZONE_DMA). Or if they are all in use by hugetlb.
* What we do is to detect the case where all pages in the zone have been
* scanned twice and there has been zero successful reclaim. Mark the zone as
* dead and from now on, only perform a short scan. Basically we're polling
* the zone for when the problem goes away.
*
* kswapd scans the zones in the highmem->normal->dma direction. It skips
* zones which have free_pages > high_wmark_pages(zone), but once a zone is
* found to have free_pages <= high_wmark_pages(zone), we scan that zone and the
* lower zones regardless of the number of free pages in the lower zones. This
* interoperates with the page allocator fallback scheme to ensure that aging
* of pages is balanced across the zones.
*/
static unsigned long balance_pgdat(pg_data_t *pgdat, int order)
{
int all_zones_ok;
int priority;
int i;
unsigned long total_scanned;
struct reclaim_state *reclaim_state = current->reclaim_state;
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.may_unmap = 1,
.may_swap = 1,
/*
* kswapd doesn't want to be bailed out while reclaim. because
* we want to put equal scanning pressure on each zone.
*/
.nr_to_reclaim = ULONG_MAX,
.swappiness = vm_swappiness,
Lumpy Reclaim V4 When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 15:03:16 +04:00
.order = order,
.mem_cgroup = NULL,
.isolate_pages = isolate_pages_global,
};
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
/*
* temp_priority is used to remember the scanning priority at which
* this zone was successfully refilled to
* free_pages == high_wmark_pages(zone).
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
*/
int temp_priority[MAX_NR_ZONES];
loop_again:
total_scanned = 0;
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
sc.nr_reclaimed = 0;
sc.may_writepage = !laptop_mode;
[PATCH] Light weight event counters The remaining counters in page_state after the zoned VM counter patches have been applied are all just for show in /proc/vmstat. They have no essential function for the VM. We use a simple increment of per cpu variables. In order to avoid the most severe races we disable preempt. Preempt does not prevent the race between an increment and an interrupt handler incrementing the same statistics counter. However, that race is exceedingly rare, we may only loose one increment or so and there is no requirement (at least not in kernel) that the vm event counters have to be accurate. In the non preempt case this results in a simple increment for each counter. For many architectures this will be reduced by the compiler to a single instruction. This single instruction is atomic for i386 and x86_64. And therefore even the rare race condition in an interrupt is avoided for both architectures in most cases. The patchset also adds an off switch for embedded systems that allows a building of linux kernels without these counters. The implementation of these counters is through inline code that hopefully results in only a single instruction increment instruction being emitted (i386, x86_64) or in the increment being hidden though instruction concurrency (EPIC architectures such as ia64 can get that done). Benefits: - VM event counter operations usually reduce to a single inline instruction on i386 and x86_64. - No interrupt disable, only preempt disable for the preempt case. Preempt disable can also be avoided by moving the counter into a spinlock. - Handling is similar to zoned VM counters. - Simple and easily extendable. - Can be omitted to reduce memory use for embedded use. References: RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2 RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2 local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2 V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2 V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2 V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2 Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 12:55:45 +04:00
count_vm_event(PAGEOUTRUN);
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
for (i = 0; i < pgdat->nr_zones; i++)
temp_priority[i] = DEF_PRIORITY;
for (priority = DEF_PRIORITY; priority >= 0; priority--) {
int end_zone = 0; /* Inclusive. 0 = ZONE_DMA */
unsigned long lru_pages = 0;
int has_under_min_watermark_zone = 0;
/* The swap token gets in the way of swapout... */
if (!priority)
disable_swap_token();
all_zones_ok = 1;
/*
* Scan in the highmem->dma direction for the highest
* zone which needs scanning
*/
for (i = pgdat->nr_zones - 1; i >= 0; i--) {
struct zone *zone = pgdat->node_zones + i;
if (!populated_zone(zone))
continue;
if (zone->all_unreclaimable && priority != DEF_PRIORITY)
continue;
/*
* Do some background aging of the anon list, to give
* pages a chance to be referenced before reclaiming.
*/
if (inactive_anon_is_low(zone, &sc))
shrink_active_list(SWAP_CLUSTER_MAX, zone,
&sc, priority, 0);
if (!zone_watermark_ok(zone, order,
high_wmark_pages(zone), 0, 0)) {
end_zone = i;
break;
}
}
if (i < 0)
goto out;
for (i = 0; i <= end_zone; i++) {
struct zone *zone = pgdat->node_zones + i;
lru_pages += zone_reclaimable_pages(zone);
}
/*
* Now scan the zone in the dma->highmem direction, stopping
* at the last zone which needs scanning.
*
* We do this because the page allocator works in the opposite
* direction. This prevents the page allocator from allocating
* pages behind kswapd's direction of progress, which would
* cause too much scanning of the lower zones.
*/
for (i = 0; i <= end_zone; i++) {
struct zone *zone = pgdat->node_zones + i;
int nr_slab;
2009-09-24 02:56:39 +04:00
int nid, zid;
if (!populated_zone(zone))
continue;
if (zone->all_unreclaimable && priority != DEF_PRIORITY)
continue;
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
temp_priority[i] = priority;
sc.nr_scanned = 0;
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
note_zone_scanning_priority(zone, priority);
2009-09-24 02:56:39 +04:00
nid = pgdat->node_id;
zid = zone_idx(zone);
/*
* Call soft limit reclaim before calling shrink_zone.
* For now we ignore the return value
*/
mem_cgroup_soft_limit_reclaim(zone, order, sc.gfp_mask,
nid, zid);
/*
* We put equal pressure on every zone, unless one
* zone has way too many pages free already.
*/
if (!zone_watermark_ok(zone, order,
8*high_wmark_pages(zone), end_zone, 0))
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
shrink_zone(priority, zone, &sc);
reclaim_state->reclaimed_slab = 0;
nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL,
lru_pages);
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
sc.nr_reclaimed += reclaim_state->reclaimed_slab;
total_scanned += sc.nr_scanned;
if (zone->all_unreclaimable)
continue;
if (nr_slab == 0 &&
zone->pages_scanned >= (zone_reclaimable_pages(zone) * 6))
zone->all_unreclaimable = 1;
/*
* If we've done a decent amount of scanning and
* the reclaim ratio is low, start doing writepage
* even in laptop mode
*/
if (total_scanned > SWAP_CLUSTER_MAX * 2 &&
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
total_scanned > sc.nr_reclaimed + sc.nr_reclaimed / 2)
sc.may_writepage = 1;
if (!zone_watermark_ok(zone, order,
high_wmark_pages(zone), end_zone, 0)) {
all_zones_ok = 0;
/*
* We are still under min water mark. This
* means that we have a GFP_ATOMIC allocation
* failure risk. Hurry up!
*/
if (!zone_watermark_ok(zone, order,
min_wmark_pages(zone), end_zone, 0))
has_under_min_watermark_zone = 1;
}
}
if (all_zones_ok)
break; /* kswapd: all done */
/*
* OK, kswapd is getting into trouble. Take a nap, then take
* another pass across the zones.
*/
if (total_scanned && (priority < DEF_PRIORITY - 2)) {
if (has_under_min_watermark_zone)
count_vm_event(KSWAPD_SKIP_CONGESTION_WAIT);
else
congestion_wait(BLK_RW_ASYNC, HZ/10);
}
/*
* We do this so kswapd doesn't build up large priorities for
* example when it is freeing in parallel with allocators. It
* matches the direct reclaim path behaviour in terms of impact
* on zone->*_priority.
*/
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
if (sc.nr_reclaimed >= SWAP_CLUSTER_MAX)
break;
}
out:
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
/*
* Note within each zone the priority level at which this zone was
* brought into a happy state. So that the next thread which scans this
* zone will start out at that priority level.
*/
for (i = 0; i < pgdat->nr_zones; i++) {
struct zone *zone = pgdat->node_zones + i;
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
zone->prev_priority = temp_priority[i];
}
if (!all_zones_ok) {
cond_resched();
[PATCH] swsusp: Improve handling of highmem Currently swsusp saves the contents of highmem pages by copying them to the normal zone which is quite inefficient (eg. it requires two normal pages to be used for saving one highmem page). This may be improved by using highmem for saving the contents of saveable highmem pages. Namely, during the suspend phase of the suspend-resume cycle we try to allocate as many free highmem pages as there are saveable highmem pages. If there are not enough highmem image pages to store the contents of all of the saveable highmem pages, some of them will be stored in the "normal" memory. Next, we allocate as many free "normal" pages as needed to store the (remaining) image data. We use a memory bitmap to mark the allocated free pages (ie. highmem as well as "normal" image pages). Now, we use another memory bitmap to mark all of the saveable pages (highmem as well as "normal") and the contents of the saveable pages are copied into the image pages. Then, the second bitmap is used to save the pfns corresponding to the saveable pages and the first one is used to save their data. During the resume phase the pfns of the pages that were saveable during the suspend are loaded from the image and used to mark the "unsafe" page frames. Next, we try to allocate as many free highmem page frames as to load all of the image data that had been in the highmem before the suspend and we allocate so many free "normal" page frames that the total number of allocated free pages (highmem and "normal") is equal to the size of the image. While doing this we have to make sure that there will be some extra free "normal" and "safe" page frames for two lists of PBEs constructed later. Now, the image data are loaded, if possible, into their "original" page frames. The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in one of two lists of PBEs. One list of PBEs is for the copies of "normal" suspend pages (ie. "normal" pages that were saveable during the suspend) and it is used in the same way as previously (ie. by the architecture-dependent parts of swsusp). The other list of PBEs is for the copies of highmem suspend pages. The pages in this list are restored (in a reversible way) right before the arch-dependent code is called. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:34:18 +03:00
try_to_freeze();
/*
* Fragmentation may mean that the system cannot be
* rebalanced for high-order allocations in all zones.
* At this point, if nr_reclaimed < SWAP_CLUSTER_MAX,
* it means the zones have been fully scanned and are still
* not balanced. For high-order allocations, there is
* little point trying all over again as kswapd may
* infinite loop.
*
* Instead, recheck all watermarks at order-0 as they
* are the most important. If watermarks are ok, kswapd will go
* back to sleep. High-order users can still perform direct
* reclaim if they wish.
*/
if (sc.nr_reclaimed < SWAP_CLUSTER_MAX)
order = sc.order = 0;
goto loop_again;
}
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
return sc.nr_reclaimed;
}
/*
* The background pageout daemon, started as a kernel thread
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
* from the init process.
*
* This basically trickles out pages so that we have _some_
* free memory available even if there is no other activity
* that frees anything up. This is needed for things like routing
* etc, where we otherwise might have all activity going on in
* asynchronous contexts that cannot page things out.
*
* If there are applications that are active memory-allocators
* (most normal use), this basically shouldn't matter.
*/
static int kswapd(void *p)
{
unsigned long order;
pg_data_t *pgdat = (pg_data_t*)p;
struct task_struct *tsk = current;
DEFINE_WAIT(wait);
struct reclaim_state reclaim_state = {
.reclaimed_slab = 0,
};
const struct cpumask *cpumask = cpumask_of_node(pgdat->node_id);
lockdep: annotate reclaim context (__GFP_NOFS) Here is another version, with the incremental patch rolled up, and added reclaim context annotation to kswapd, and allocation tracing to slab allocators (which may only ever reach the page allocator in rare cases, so it is good to put annotations here too). Haven't tested this version as such, but it should be getting closer to merge worthy ;) -- After noticing some code in mm/filemap.c accidentally perform a __GFP_FS allocation when it should not have been, I thought it might be a good idea to try to catch this kind of thing with lockdep. I coded up a little idea that seems to work. Unfortunately the system has to actually be in __GFP_FS page reclaim, then take the lock, before it will mark it. But at least that might still be some orders of magnitude more common (and more debuggable) than an actual deadlock condition, so we have some improvement I hope (the concept is no less complete than discovery of a lock's interrupt contexts). I guess we could even do the same thing with __GFP_IO (normal reclaim), and even GFP_NOIO locks too... but filesystems will have the most locks and fiddly code paths, so let's start there and see how it goes. It *seems* to work. I did a quick test. ================================= [ INFO: inconsistent lock state ] 2.6.28-rc6-00007-ged31348-dirty #26 --------------------------------- inconsistent {in-reclaim-W} -> {ov-reclaim-W} usage. modprobe/8526 [HC0[0]:SC0[0]:HE1:SE1] takes: (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd] {in-reclaim-W} state was registered at: [<ffffffff80267bdb>] __lock_acquire+0x75b/0x1a60 [<ffffffff80268f71>] lock_acquire+0x91/0xc0 [<ffffffff8070f0e1>] mutex_lock_nested+0xb1/0x310 [<ffffffffa002002b>] brd_init+0x2b/0x216 [brd] [<ffffffff8020903b>] _stext+0x3b/0x170 [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0 [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff irq event stamp: 3929 hardirqs last enabled at (3929): [<ffffffff8070f2b5>] mutex_lock_nested+0x285/0x310 hardirqs last disabled at (3928): [<ffffffff8070f089>] mutex_lock_nested+0x59/0x310 softirqs last enabled at (3732): [<ffffffff8061f623>] sk_filter+0x83/0xe0 softirqs last disabled at (3730): [<ffffffff8061f5b6>] sk_filter+0x16/0xe0 other info that might help us debug this: 1 lock held by modprobe/8526: #0: (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd] stack backtrace: Pid: 8526, comm: modprobe Not tainted 2.6.28-rc6-00007-ged31348-dirty #26 Call Trace: [<ffffffff80265483>] print_usage_bug+0x193/0x1d0 [<ffffffff80266530>] mark_lock+0xaf0/0xca0 [<ffffffff80266735>] mark_held_locks+0x55/0xc0 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffff802667ca>] trace_reclaim_fs+0x2a/0x60 [<ffffffff80285005>] __alloc_pages_internal+0x475/0x580 [<ffffffff8070f29e>] ? mutex_lock_nested+0x26e/0x310 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffffa002006a>] brd_init+0x6a/0x216 [brd] [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd] [<ffffffff8020903b>] _stext+0x3b/0x170 [<ffffffff8070f8b9>] ? mutex_unlock+0x9/0x10 [<ffffffff8070f83d>] ? __mutex_unlock_slowpath+0x10d/0x180 [<ffffffff802669ec>] ? trace_hardirqs_on_caller+0x12c/0x190 [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0 [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 10:12:39 +03:00
lockdep_set_current_reclaim_state(GFP_KERNEL);
if (!cpumask_empty(cpumask))
set_cpus_allowed_ptr(tsk, cpumask);
current->reclaim_state = &reclaim_state;
/*
* Tell the memory management that we're a "memory allocator",
* and that if we need more memory we should get access to it
* regardless (see "__alloc_pages()"). "kswapd" should
* never get caught in the normal page freeing logic.
*
* (Kswapd normally doesn't need memory anyway, but sometimes
* you need a small amount of memory in order to be able to
* page out something else, and this flag essentially protects
* us from recursively trying to free more memory as we're
* trying to free the first piece of memory in the first place).
*/
tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
set_freezable();
order = 0;
for ( ; ; ) {
unsigned long new_order;
int ret;
prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
new_order = pgdat->kswapd_max_order;
pgdat->kswapd_max_order = 0;
if (order < new_order) {
/*
* Don't sleep if someone wants a larger 'order'
* allocation
*/
order = new_order;
} else {
if (!freezing(current) && !kthread_should_stop()) {
long remaining = 0;
/* Try to sleep for a short interval */
if (!sleeping_prematurely(pgdat, order, remaining)) {
remaining = schedule_timeout(HZ/10);
finish_wait(&pgdat->kswapd_wait, &wait);
prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
}
/*
* After a short sleep, check if it was a
* premature sleep. If not, then go fully
* to sleep until explicitly woken up
*/
if (!sleeping_prematurely(pgdat, order, remaining))
schedule();
else {
if (remaining)
count_vm_event(KSWAPD_LOW_WMARK_HIT_QUICKLY);
else
count_vm_event(KSWAPD_HIGH_WMARK_HIT_QUICKLY);
}
}
order = pgdat->kswapd_max_order;
}
finish_wait(&pgdat->kswapd_wait, &wait);
ret = try_to_freeze();
if (kthread_should_stop())
break;
/*
* We can speed up thawing tasks if we don't call balance_pgdat
* after returning from the refrigerator
*/
if (!ret)
balance_pgdat(pgdat, order);
}
return 0;
}
/*
* A zone is low on free memory, so wake its kswapd task to service it.
*/
void wakeup_kswapd(struct zone *zone, int order)
{
pg_data_t *pgdat;
if (!populated_zone(zone))
return;
pgdat = zone->zone_pgdat;
if (zone_watermark_ok(zone, order, low_wmark_pages(zone), 0, 0))
return;
if (pgdat->kswapd_max_order < order)
pgdat->kswapd_max_order = order;
[PATCH] cpuset: rework cpuset_zone_allowed api Elaborate the API for calling cpuset_zone_allowed(), so that users have to explicitly choose between the two variants: cpuset_zone_allowed_hardwall() cpuset_zone_allowed_softwall() Until now, whether or not you got the hardwall flavor depended solely on whether or not you or'd in the __GFP_HARDWALL gfp flag to the gfp_mask argument. If you didn't specify __GFP_HARDWALL, you implicitly got the softwall version. Unfortunately, this meant that users would end up with the softwall version without thinking about it. Since only the softwall version might sleep, this led to bugs with possible sleeping in interrupt context on more than one occassion. The hardwall version requires that the current tasks mems_allowed allows the node of the specified zone (or that you're in interrupt or that __GFP_THISNODE is set or that you're on a one cpuset system.) The softwall version, depending on the gfp_mask, might allow a node if it was allowed in the nearest enclusing cpuset marked mem_exclusive (which requires taking the cpuset lock 'callback_mutex' to evaluate.) This patch removes the cpuset_zone_allowed() call, and forces the caller to explicitly choose between the hardwall and the softwall case. If the caller wants the gfp_mask to determine this choice, they should (1) be sure they can sleep or that __GFP_HARDWALL is set, and (2) invoke the cpuset_zone_allowed_softwall() routine. This adds another 100 or 200 bytes to the kernel text space, due to the few lines of nearly duplicate code at the top of both cpuset_zone_allowed_* routines. It should save a few instructions executed for the calls that turned into calls of cpuset_zone_allowed_hardwall, thanks to not having to set (before the call) then check (within the call) the __GFP_HARDWALL flag. For the most critical call, from get_page_from_freelist(), the same instructions are executed as before -- the old cpuset_zone_allowed() routine it used to call is the same code as the cpuset_zone_allowed_softwall() routine that it calls now. Not a perfect win, but seems worth it, to reduce this chance of hitting a sleeping with irq off complaint again. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 11:34:25 +03:00
if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
return;
if (!waitqueue_active(&pgdat->kswapd_wait))
return;
wake_up_interruptible(&pgdat->kswapd_wait);
}
/*
* The reclaimable count would be mostly accurate.
* The less reclaimable pages may be
* - mlocked pages, which will be moved to unevictable list when encountered
* - mapped pages, which may require several travels to be reclaimed
* - dirty pages, which is not "instantly" reclaimable
*/
unsigned long global_reclaimable_pages(void)
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
{
int nr;
nr = global_page_state(NR_ACTIVE_FILE) +
global_page_state(NR_INACTIVE_FILE);
if (nr_swap_pages > 0)
nr += global_page_state(NR_ACTIVE_ANON) +
global_page_state(NR_INACTIVE_ANON);
return nr;
}
unsigned long zone_reclaimable_pages(struct zone *zone)
{
int nr;
nr = zone_page_state(zone, NR_ACTIVE_FILE) +
zone_page_state(zone, NR_INACTIVE_FILE);
if (nr_swap_pages > 0)
nr += zone_page_state(zone, NR_ACTIVE_ANON) +
zone_page_state(zone, NR_INACTIVE_ANON);
return nr;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:32 +04:00
}
#ifdef CONFIG_HIBERNATION
/*
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
* Try to free `nr_to_reclaim' of memory, system-wide, and return the number of
* freed pages.
*
* Rather than trying to age LRUs the aim is to preserve the overall
* LRU order by reclaiming preferentially
* inactive > active > active referenced > active mapped
*/
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
unsigned long shrink_all_memory(unsigned long nr_to_reclaim)
{
struct reclaim_state reclaim_state;
struct scan_control sc = {
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
.gfp_mask = GFP_HIGHUSER_MOVABLE,
.may_swap = 1,
.may_unmap = 1,
.may_writepage = 1,
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
.nr_to_reclaim = nr_to_reclaim,
.hibernation_mode = 1,
.swappiness = vm_swappiness,
.order = 0,
.isolate_pages = isolate_pages_global,
};
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
struct zonelist * zonelist = node_zonelist(numa_node_id(), sc.gfp_mask);
struct task_struct *p = current;
unsigned long nr_reclaimed;
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
p->flags |= PF_MEMALLOC;
lockdep_set_current_reclaim_state(sc.gfp_mask);
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
nr_reclaimed = do_try_to_free_pages(zonelist, &sc);
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
p->reclaim_state = NULL;
lockdep_clear_current_reclaim_state();
p->flags &= ~PF_MEMALLOC;
vmscan: kill hibernation specific reclaim logic and unify it shrink_all_zone() was introduced by commit d6277db4ab (swsusp: rework memory shrinker) for hibernate performance improvement. and sc.swap_cluster_max was introduced by commit a06fe4d307 (Speed freeing memory for suspend). commit a06fe4d307 said Without the patch: Freed 14600 pages in 1749 jiffies = 32.61 MB/s (Anomolous!) Freed 88563 pages in 14719 jiffies = 23.50 MB/s Freed 205734 pages in 32389 jiffies = 24.81 MB/s With the patch: Freed 68252 pages in 496 jiffies = 537.52 MB/s Freed 116464 pages in 569 jiffies = 798.54 MB/s Freed 209699 pages in 705 jiffies = 1161.89 MB/s At that time, their patch was pretty worth. However, Modern Hardware trend and recent VM improvement broke its worth. From several reason, I think we should remove shrink_all_zones() at all. detail: 1) Old days, shrink_zone()'s slowness was mainly caused by stupid io-throttle at no i/o congestion. but current shrink_zone() is sane, not slow. 2) shrink_all_zone() try to shrink all pages at a time. but it doesn't works fine on numa system. example) System has 4GB memory and each node have 2GB. and hibernate need 1GB. optimal) steal 500MB from each node. shrink_all_zones) steal 1GB from node-0. Oh, Cache balancing logic was broken. ;) Unfortunately, Desktop system moved ahead NUMA at nowadays. (Side note, if hibernate require 2GB, shrink_all_zones() never success on above machine) 3) if the node has several I/O flighting pages, shrink_all_zones() makes pretty bad result. schenario) hibernate need 1GB 1) shrink_all_zones() try to reclaim 1GB from Node-0 2) but it only reclaimed 990MB 3) stupidly, shrink_all_zones() try to reclaim 1GB from Node-1 4) it reclaimed 990MB Oh, well. it reclaimed twice much than required. In the other hand, current shrink_zone() has sane baling out logic. then, it doesn't make overkill reclaim. then, we lost shrink_zones()'s risk. 4) SplitLRU VM always keep active/inactive ratio very carefully. inactive list only shrinking break its assumption. it makes unnecessary OOM risk. it obviously suboptimal. Now, shrink_all_memory() is only the wrapper function of do_try_to_free_pages(). it bring good reviewability and debuggability, and solve above problems. side note: Reclaim logic unificication makes two good side effect. - Fix recursive reclaim bug on shrink_all_memory(). it did forgot to use PF_MEMALLOC. it mean the system be able to stuck into deadlock. - Now, shrink_all_memory() got lockdep awareness. it bring good debuggability. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 04:59:12 +03:00
return nr_reclaimed;
}
#endif /* CONFIG_HIBERNATION */
/* It's optimal to keep kswapds on the same CPUs as their memory, but
not required for correctness. So if the last cpu in a node goes
away, we get changed to run anywhere: as the first one comes back,
restore their cpu bindings. */
static int __devinit cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
int nid;
if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) {
for_each_node_state(nid, N_HIGH_MEMORY) {
pg_data_t *pgdat = NODE_DATA(nid);
const struct cpumask *mask;
mask = cpumask_of_node(pgdat->node_id);
if (cpumask_any_and(cpu_online_mask, mask) < nr_cpu_ids)
/* One of our CPUs online: restore mask */
set_cpus_allowed_ptr(pgdat->kswapd, mask);
}
}
return NOTIFY_OK;
}
/*
* This kswapd start function will be called by init and node-hot-add.
* On node-hot-add, kswapd will moved to proper cpus if cpus are hot-added.
*/
int kswapd_run(int nid)
{
pg_data_t *pgdat = NODE_DATA(nid);
int ret = 0;
if (pgdat->kswapd)
return 0;
pgdat->kswapd = kthread_run(kswapd, pgdat, "kswapd%d", nid);
if (IS_ERR(pgdat->kswapd)) {
/* failure at boot is fatal */
BUG_ON(system_state == SYSTEM_BOOTING);
printk("Failed to start kswapd on node %d\n",nid);
ret = -1;
}
return ret;
}
/*
* Called by memory hotplug when all memory in a node is offlined.
*/
void kswapd_stop(int nid)
{
struct task_struct *kswapd = NODE_DATA(nid)->kswapd;
if (kswapd)
kthread_stop(kswapd);
}
static int __init kswapd_init(void)
{
int nid;
swap_setup();
for_each_node_state(nid, N_HIGH_MEMORY)
kswapd_run(nid);
hotcpu_notifier(cpu_callback, 0);
return 0;
}
module_init(kswapd_init)
#ifdef CONFIG_NUMA
/*
* Zone reclaim mode
*
* If non-zero call zone_reclaim when the number of free pages falls below
* the watermarks.
*/
int zone_reclaim_mode __read_mostly;
#define RECLAIM_OFF 0
#define RECLAIM_ZONE (1<<0) /* Run shrink_inactive_list on the zone */
#define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */
#define RECLAIM_SWAP (1<<2) /* Swap pages out during reclaim */
/*
* Priority for ZONE_RECLAIM. This determines the fraction of pages
* of a node considered for each zone_reclaim. 4 scans 1/16th of
* a zone.
*/
#define ZONE_RECLAIM_PRIORITY 4
/*
* Percentage of pages in a zone that must be unmapped for zone_reclaim to
* occur.
*/
int sysctl_min_unmapped_ratio = 1;
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
/*
* If the number of slab pages in a zone grows beyond this percentage then
* slab reclaim needs to occur.
*/
int sysctl_min_slab_ratio = 5;
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:20 +04:00
static inline unsigned long zone_unmapped_file_pages(struct zone *zone)
{
unsigned long file_mapped = zone_page_state(zone, NR_FILE_MAPPED);
unsigned long file_lru = zone_page_state(zone, NR_INACTIVE_FILE) +
zone_page_state(zone, NR_ACTIVE_FILE);
/*
* It's possible for there to be more file mapped pages than
* accounted for by the pages on the file LRU lists because
* tmpfs pages accounted for as ANON can also be FILE_MAPPED
*/
return (file_lru > file_mapped) ? (file_lru - file_mapped) : 0;
}
/* Work out how many page cache pages we can reclaim in this reclaim_mode */
static long zone_pagecache_reclaimable(struct zone *zone)
{
long nr_pagecache_reclaimable;
long delta = 0;
/*
* If RECLAIM_SWAP is set, then all file pages are considered
* potentially reclaimable. Otherwise, we have to worry about
* pages like swapcache and zone_unmapped_file_pages() provides
* a better estimate
*/
if (zone_reclaim_mode & RECLAIM_SWAP)
nr_pagecache_reclaimable = zone_page_state(zone, NR_FILE_PAGES);
else
nr_pagecache_reclaimable = zone_unmapped_file_pages(zone);
/* If we can't clean pages, remove dirty pages from consideration */
if (!(zone_reclaim_mode & RECLAIM_WRITE))
delta += zone_page_state(zone, NR_FILE_DIRTY);
/* Watch for any possible underflows due to delta */
if (unlikely(delta > nr_pagecache_reclaimable))
delta = nr_pagecache_reclaimable;
return nr_pagecache_reclaimable - delta;
}
/*
* Try to free up some pages from this zone through reclaim.
*/
static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
{
/* Minimum pages needed in order to stay on node */
const unsigned long nr_pages = 1 << order;
struct task_struct *p = current;
struct reclaim_state reclaim_state;
int priority;
struct scan_control sc = {
.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE),
.may_unmap = !!(zone_reclaim_mode & RECLAIM_SWAP),
.may_swap = 1,
.nr_to_reclaim = max_t(unsigned long, nr_pages,
SWAP_CLUSTER_MAX),
.gfp_mask = gfp_mask,
.swappiness = vm_swappiness,
.order = order,
.isolate_pages = isolate_pages_global,
};
unsigned long slab_reclaimable;
disable_swap_token();
cond_resched();
/*
* We need to be able to allocate from the reserves for RECLAIM_SWAP
* and we also need to be able to write out pages for RECLAIM_WRITE
* and RECLAIM_SWAP.
*/
p->flags |= PF_MEMALLOC | PF_SWAPWRITE;
lockdep_set_current_reclaim_state(gfp_mask);
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:20 +04:00
if (zone_pagecache_reclaimable(zone) > zone->min_unmapped_pages) {
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
/*
* Free memory by calling shrink zone with increasing
* priorities until we have enough memory freed.
*/
priority = ZONE_RECLAIM_PRIORITY;
do {
[PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton <akpm@osdl.org> __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 21:38:24 +04:00
note_zone_scanning_priority(zone, priority);
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
shrink_zone(priority, zone, &sc);
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
priority--;
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
} while (priority >= 0 && sc.nr_reclaimed < nr_pages);
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
}
slab_reclaimable = zone_page_state(zone, NR_SLAB_RECLAIMABLE);
if (slab_reclaimable > zone->min_slab_pages) {
/*
* shrink_slab() does not currently allow us to determine how
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
* many pages were freed in this zone. So we take the current
* number of slab pages and shake the slab until it is reduced
* by the same nr_pages that we used for reclaiming unmapped
* pages.
*
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
* Note that shrink_slab will free memory on all zones and may
* take a long time.
*/
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
while (shrink_slab(sc.nr_scanned, gfp_mask, order) &&
zone_page_state(zone, NR_SLAB_RECLAIMABLE) >
slab_reclaimable - nr_pages)
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
;
/*
* Update nr_reclaimed by the number of slab pages we
* reclaimed from this zone.
*/
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
sc.nr_reclaimed += slab_reclaimable -
zone_page_state(zone, NR_SLAB_RECLAIMABLE);
}
p->reclaim_state = NULL;
current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE);
lockdep_clear_current_reclaim_state();
vmscan: bail out of direct reclaim after swap_cluster_max pages When the VM is under pressure, it can happen that several direct reclaim processes are in the pageout code simultaneously. It also happens that the reclaiming processes run into mostly referenced, mapped and dirty pages in the first round. This results in multiple direct reclaim processes having a lower pageout priority, which corresponds to a higher target of pages to scan. This in turn can result in each direct reclaim process freeing many pages. Together, they can end up freeing way too many pages. This kicks useful data out of memory (in some cases more than half of all memory is swapped out). It also impacts performance by keeping tasks stuck in the pageout code for too long. A 30% improvement in hackbench has been observed with this patch. The fix is relatively simple: in shrink_zone() we can check how many pages we have already freed, direct reclaim tasks break out of the scanning loop if they have already freed enough pages and have reached a lower priority level. We do not break out of shrink_zone() when priority == DEF_PRIORITY, to ensure that equal pressure is applied to every zone in the common case. However, in order to do this we do need to know how many pages we already freed, so move nr_reclaimed into scan_control. akpm: a historical interlude... We tried this in 2004: :commit e468e46a9bea3297011d5918663ce6d19094cf87 :Author: akpm <akpm> :Date: Thu Jun 24 15:53:52 2004 +0000 : :[PATCH] vmscan.c: dont reclaim too many pages : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly hit : a large number of reclaimable pages on the LRU. : Change things so we bale out when SWAP_CLUSTER_MAX pages have been reclaimed. And we reverted it in 2006: :commit 210fe530305ee50cd889fe9250168228b2994f32 :Author: Andrew Morton <akpm@osdl.org> :Date: Fri Jan 6 00:11:14 2006 -0800 : : [PATCH] vmscan: balancing fix : : Revert a patch which went into 2.6.8-rc1. The changelog for that patch was: : : The shrink_zone() logic can, under some circumstances, cause far too many : pages to be reclaimed. Say, we're scanning at high priority and suddenly : hit a large number of reclaimable pages on the LRU. : : Change things so we bale out when SWAP_CLUSTER_MAX pages have been : reclaimed. : : Problem is, this change caused significant imbalance in inter-zone scan : balancing by truncating scans of larger zones. : : Suppose, for example, ZONE_HIGHMEM is 10x the size of ZONE_NORMAL. The zone : balancing algorithm would require that if we're scanning 100 pages of : ZONE_HIGHMEM, we should scan 10 pages of ZONE_NORMAL. But this logic will : cause the scanning of ZONE_HIGHMEM to bale out after only 32 pages are : reclaimed. Thus effectively causing smaller zones to be scanned relatively : harder than large ones. : : Now I need to remember what the workload was which caused me to write this : patch originally, then fix it up in a different way... And we haven't demonstrated that whatever problem caused that reversion is not being reintroduced by this change in 2008. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 01:40:01 +03:00
return sc.nr_reclaimed >= nr_pages;
}
int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
{
int node_id;
int ret;
/*
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 10:31:52 +04:00
* Zone reclaim reclaims unmapped file backed pages and
* slab pages if we are over the defined limits.
*
* A small portion of unmapped file backed pages is needed for
* file I/O otherwise pages read by file I/O will be immediately
* thrown out if the zone is overallocated. So we do not reclaim
* if less than a specified percentage of the zone is used by
* unmapped file backed pages.
*/
vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim A bug was brought to my attention against a distro kernel but it affects mainline and I believe problems like this have been reported in various guises on the mailing lists although I don't have specific examples at the moment. The reported problem was that malloc() stalled for a long time (minutes in some cases) if a large tmpfs mount was occupying a large percentage of memory overall. The pages did not get cleaned or reclaimed by zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists are uselessly scanned frequencly making the CPU spin at near 100%. This patchset intends to address that bug and bring the behaviour of zone_reclaim() more in line with expectations which were noticed during investigation. It is based on top of mmotm and takes advantage of Kosaki's work with respect to zone_reclaim(). Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the scan should go ahead. The broken heuristic is what was causing the malloc() stall as it uselessly scanned the LRU constantly. Currently, zone_reclaim is assuming zone_reclaim_mode is 1 and historically it could not deal with tmpfs pages at all. This fixes up the heuristic so that an unnecessary scan is more likely to be correctly avoided. Patch 2 notes that zone_reclaim() returning a failure automatically means the zone is marked full. This is not always true. It could have failed because the GFP mask or zone_reclaim_mode were unsuitable. Patch 3 introduces a counter zreclaim_failed that will increment each time the zone_reclaim scan-avoidance heuristics fail. If that counter is rapidly increasing, then zone_reclaim_mode should be set to 0 as a temporarily resolution and a bug reported because the scan-avoidance heuristic is still broken. This patch: On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. There is a heuristic that determines if the scan is worthwhile but the problem is that the heuristic is not being properly applied and is basically assuming zone_reclaim_mode is 1 if it is enabled. The lack of proper detection can manfiest as high CPU usage as the LRU list is scanned uselessly. Historically, once enabled it was depending on NR_FILE_PAGES which may include swapcache pages that the reclaim_mode cannot deal with. Patch vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included pages that were not file-backed such as swapcache and made a calculation based on the inactive, active and mapped files. This is far superior when zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a reasonable starting figure. This patch alters how zone_reclaim() works out how many pages it might be able to reclaim given the current reclaim_mode. If RECLAIM_SWAP is set in the reclaim_mode it will either consider NR_FILE_PAGES as potential candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount swapcache and other non-file-backed pages. If RECLAIM_WRITE is not set, then NR_FILE_DIRTY number of pages are not candidates. If RECLAIM_SWAP is not set, then NR_FILE_MAPPED are not. [kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages] [fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:20 +04:00
if (zone_pagecache_reclaimable(zone) <= zone->min_unmapped_pages &&
zone_page_state(zone, NR_SLAB_RECLAIMABLE) <= zone->min_slab_pages)
vmscan: do not unconditionally treat zones that fail zone_reclaim() as full On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. The problem is that zone_reclaim() failing at all means the zone gets marked full. This can cause situations where a zone is usable, but is being skipped because it has been considered full. Take a situation where a large tmpfs mount is occuping a large percentage of memory overall. The pages do not get cleaned or reclaimed by zone_reclaim(), but the zone gets marked full and the zonelist cache considers them not worth trying in the future. This patch makes zone_reclaim() return more fine-grained information about what occured when zone_reclaim() failued. The zone only gets marked full if it really is unreclaimable. If it's a case that the scan did not occur or if enough pages were not reclaimed with the limited reclaim_mode, then the zone is simply skipped. There is a side-effect to this patch. Currently, if zone_reclaim() successfully reclaimed SWAP_CLUSTER_MAX, an allocation attempt would go ahead. With this patch applied, zone watermarks are rechecked after zone_reclaim() does some work. This bug was introduced by commit 9276b1bc96a132f4068fdee00983c532f43d3a26 ("memory page_alloc zonelist caching speedup") way back in 2.6.19 when the zonelist_cache was introduced. It was not intended that zone_reclaim() aggressively consider the zone to be full when it failed as full direct reclaim can still be an option. Due to the age of the bug, it should be considered a -stable candidate. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:22 +04:00
return ZONE_RECLAIM_FULL;
if (zone->all_unreclaimable)
vmscan: do not unconditionally treat zones that fail zone_reclaim() as full On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. The problem is that zone_reclaim() failing at all means the zone gets marked full. This can cause situations where a zone is usable, but is being skipped because it has been considered full. Take a situation where a large tmpfs mount is occuping a large percentage of memory overall. The pages do not get cleaned or reclaimed by zone_reclaim(), but the zone gets marked full and the zonelist cache considers them not worth trying in the future. This patch makes zone_reclaim() return more fine-grained information about what occured when zone_reclaim() failued. The zone only gets marked full if it really is unreclaimable. If it's a case that the scan did not occur or if enough pages were not reclaimed with the limited reclaim_mode, then the zone is simply skipped. There is a side-effect to this patch. Currently, if zone_reclaim() successfully reclaimed SWAP_CLUSTER_MAX, an allocation attempt would go ahead. With this patch applied, zone watermarks are rechecked after zone_reclaim() does some work. This bug was introduced by commit 9276b1bc96a132f4068fdee00983c532f43d3a26 ("memory page_alloc zonelist caching speedup") way back in 2.6.19 when the zonelist_cache was introduced. It was not intended that zone_reclaim() aggressively consider the zone to be full when it failed as full direct reclaim can still be an option. Due to the age of the bug, it should be considered a -stable candidate. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:22 +04:00
return ZONE_RECLAIM_FULL;
/*
* Do not scan if the allocation should not be delayed.
*/
if (!(gfp_mask & __GFP_WAIT) || (current->flags & PF_MEMALLOC))
vmscan: do not unconditionally treat zones that fail zone_reclaim() as full On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. The problem is that zone_reclaim() failing at all means the zone gets marked full. This can cause situations where a zone is usable, but is being skipped because it has been considered full. Take a situation where a large tmpfs mount is occuping a large percentage of memory overall. The pages do not get cleaned or reclaimed by zone_reclaim(), but the zone gets marked full and the zonelist cache considers them not worth trying in the future. This patch makes zone_reclaim() return more fine-grained information about what occured when zone_reclaim() failued. The zone only gets marked full if it really is unreclaimable. If it's a case that the scan did not occur or if enough pages were not reclaimed with the limited reclaim_mode, then the zone is simply skipped. There is a side-effect to this patch. Currently, if zone_reclaim() successfully reclaimed SWAP_CLUSTER_MAX, an allocation attempt would go ahead. With this patch applied, zone watermarks are rechecked after zone_reclaim() does some work. This bug was introduced by commit 9276b1bc96a132f4068fdee00983c532f43d3a26 ("memory page_alloc zonelist caching speedup") way back in 2.6.19 when the zonelist_cache was introduced. It was not intended that zone_reclaim() aggressively consider the zone to be full when it failed as full direct reclaim can still be an option. Due to the age of the bug, it should be considered a -stable candidate. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:22 +04:00
return ZONE_RECLAIM_NOSCAN;
/*
* Only run zone reclaim on the local zone or on zones that do not
* have associated processors. This will favor the local processor
* over remote processors and spread off node memory allocations
* as wide as possible.
*/
node_id = zone_to_nid(zone);
if (node_state(node_id, N_CPU) && node_id != numa_node_id())
vmscan: do not unconditionally treat zones that fail zone_reclaim() as full On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. The problem is that zone_reclaim() failing at all means the zone gets marked full. This can cause situations where a zone is usable, but is being skipped because it has been considered full. Take a situation where a large tmpfs mount is occuping a large percentage of memory overall. The pages do not get cleaned or reclaimed by zone_reclaim(), but the zone gets marked full and the zonelist cache considers them not worth trying in the future. This patch makes zone_reclaim() return more fine-grained information about what occured when zone_reclaim() failued. The zone only gets marked full if it really is unreclaimable. If it's a case that the scan did not occur or if enough pages were not reclaimed with the limited reclaim_mode, then the zone is simply skipped. There is a side-effect to this patch. Currently, if zone_reclaim() successfully reclaimed SWAP_CLUSTER_MAX, an allocation attempt would go ahead. With this patch applied, zone watermarks are rechecked after zone_reclaim() does some work. This bug was introduced by commit 9276b1bc96a132f4068fdee00983c532f43d3a26 ("memory page_alloc zonelist caching speedup") way back in 2.6.19 when the zonelist_cache was introduced. It was not intended that zone_reclaim() aggressively consider the zone to be full when it failed as full direct reclaim can still be an option. Due to the age of the bug, it should be considered a -stable candidate. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:22 +04:00
return ZONE_RECLAIM_NOSCAN;
if (zone_test_and_set_flag(zone, ZONE_RECLAIM_LOCKED))
vmscan: do not unconditionally treat zones that fail zone_reclaim() as full On NUMA machines, the administrator can configure zone_reclaim_mode that is a more targetted form of direct reclaim. On machines with large NUMA distances for example, a zone_reclaim_mode defaults to 1 meaning that clean unmapped pages will be reclaimed if the zone watermarks are not being met. The problem is that zone_reclaim() failing at all means the zone gets marked full. This can cause situations where a zone is usable, but is being skipped because it has been considered full. Take a situation where a large tmpfs mount is occuping a large percentage of memory overall. The pages do not get cleaned or reclaimed by zone_reclaim(), but the zone gets marked full and the zonelist cache considers them not worth trying in the future. This patch makes zone_reclaim() return more fine-grained information about what occured when zone_reclaim() failued. The zone only gets marked full if it really is unreclaimable. If it's a case that the scan did not occur or if enough pages were not reclaimed with the limited reclaim_mode, then the zone is simply skipped. There is a side-effect to this patch. Currently, if zone_reclaim() successfully reclaimed SWAP_CLUSTER_MAX, an allocation attempt would go ahead. With this patch applied, zone watermarks are rechecked after zone_reclaim() does some work. This bug was introduced by commit 9276b1bc96a132f4068fdee00983c532f43d3a26 ("memory page_alloc zonelist caching speedup") way back in 2.6.19 when the zonelist_cache was introduced. It was not intended that zone_reclaim() aggressively consider the zone to be full when it failed as full direct reclaim can still be an option. Due to the age of the bug, it should be considered a -stable candidate. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 02:33:22 +04:00
return ZONE_RECLAIM_NOSCAN;
ret = __zone_reclaim(zone, gfp_mask, order);
zone_clear_flag(zone, ZONE_RECLAIM_LOCKED);
if (!ret)
count_vm_event(PGSCAN_ZONE_RECLAIM_FAILED);
return ret;
}
#endif
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
/*
* page_evictable - test whether a page is evictable
* @page: the page to test
* @vma: the VMA in which the page is or will be mapped, may be NULL
*
* Test whether page is evictable--i.e., should be placed on active/inactive
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
* lists vs unevictable list. The vma argument is !NULL when called from the
* fault path to determine how to instantate a new page.
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
*
* Reasons page might not be evictable:
Ramfs and Ram Disk pages are unevictable Christoph Lameter pointed out that ram disk pages also clutter the LRU lists. When vmscan finds them dirty and tries to clean them, the ram disk writeback function just redirties the page so that it goes back onto the active list. Round and round she goes... With the ram disk driver [rd.c] replaced by the newer 'brd.c', this is no longer the case, as ram disk pages are no longer maintained on the lru. [This makes them unmigratable for defrag or memory hot remove, but that can be addressed by a separate patch series.] However, the ramfs pages behave like ram disk pages used to, so: Define new address_space flag [shares address_space flags member with mapping's gfp mask] to indicate that the address space contains all unevictable pages. This will provide for efficient testing of ramfs pages in page_evictable(). Also provide wrapper functions to set/test the unevictable state to minimize #ifdefs in ramfs driver and any other users of this facility. Set the unevictable state on address_space structures for new ramfs inodes. Test the unevictable state in page_evictable() to cull unevictable pages. These changes depend on [CONFIG_]UNEVICTABLE_LRU. [riel@redhat.com: undo the brd.c part] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Debugged-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:42 +04:00
* (1) page's mapping marked unevictable
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
* (2) page is part of an mlocked VMA
Ramfs and Ram Disk pages are unevictable Christoph Lameter pointed out that ram disk pages also clutter the LRU lists. When vmscan finds them dirty and tries to clean them, the ram disk writeback function just redirties the page so that it goes back onto the active list. Round and round she goes... With the ram disk driver [rd.c] replaced by the newer 'brd.c', this is no longer the case, as ram disk pages are no longer maintained on the lru. [This makes them unmigratable for defrag or memory hot remove, but that can be addressed by a separate patch series.] However, the ramfs pages behave like ram disk pages used to, so: Define new address_space flag [shares address_space flags member with mapping's gfp mask] to indicate that the address space contains all unevictable pages. This will provide for efficient testing of ramfs pages in page_evictable(). Also provide wrapper functions to set/test the unevictable state to minimize #ifdefs in ramfs driver and any other users of this facility. Set the unevictable state on address_space structures for new ramfs inodes. Test the unevictable state in page_evictable() to cull unevictable pages. These changes depend on [CONFIG_]UNEVICTABLE_LRU. [riel@redhat.com: undo the brd.c part] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Debugged-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:42 +04:00
*
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
*/
int page_evictable(struct page *page, struct vm_area_struct *vma)
{
Ramfs and Ram Disk pages are unevictable Christoph Lameter pointed out that ram disk pages also clutter the LRU lists. When vmscan finds them dirty and tries to clean them, the ram disk writeback function just redirties the page so that it goes back onto the active list. Round and round she goes... With the ram disk driver [rd.c] replaced by the newer 'brd.c', this is no longer the case, as ram disk pages are no longer maintained on the lru. [This makes them unmigratable for defrag or memory hot remove, but that can be addressed by a separate patch series.] However, the ramfs pages behave like ram disk pages used to, so: Define new address_space flag [shares address_space flags member with mapping's gfp mask] to indicate that the address space contains all unevictable pages. This will provide for efficient testing of ramfs pages in page_evictable(). Also provide wrapper functions to set/test the unevictable state to minimize #ifdefs in ramfs driver and any other users of this facility. Set the unevictable state on address_space structures for new ramfs inodes. Test the unevictable state in page_evictable() to cull unevictable pages. These changes depend on [CONFIG_]UNEVICTABLE_LRU. [riel@redhat.com: undo the brd.c part] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Debugged-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:42 +04:00
if (mapping_unevictable(page_mapping(page)))
return 0;
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
if (PageMlocked(page) || (vma && is_mlocked_vma(vma, page)))
return 0;
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:39 +04:00
return 1;
}
/**
* check_move_unevictable_page - check page for evictability and move to appropriate zone lru list
* @page: page to check evictability and move to appropriate lru list
* @zone: zone page is in
*
* Checks a page for evictability and moves the page to the appropriate
* zone lru list.
*
* Restrictions: zone->lru_lock must be held, page must be on LRU and must
* have PageUnevictable set.
*/
static void check_move_unevictable_page(struct page *page, struct zone *zone)
{
VM_BUG_ON(PageActive(page));
retry:
ClearPageUnevictable(page);
if (page_evictable(page, NULL)) {
enum lru_list l = page_lru_base_type(page);
__dec_zone_state(zone, NR_UNEVICTABLE);
list_move(&page->lru, &zone->lru[l].list);
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
mem_cgroup_move_lists(page, LRU_UNEVICTABLE, l);
__inc_zone_state(zone, NR_INACTIVE_ANON + l);
__count_vm_event(UNEVICTABLE_PGRESCUED);
} else {
/*
* rotate unevictable list
*/
SetPageUnevictable(page);
list_move(&page->lru, &zone->lru[LRU_UNEVICTABLE].list);
memcg: synchronized LRU A big patch for changing memcg's LRU semantics. Now, - page_cgroup is linked to mem_cgroup's its own LRU (per zone). - LRU of page_cgroup is not synchronous with global LRU. - page and page_cgroup is one-to-one and statically allocated. - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc); - SwapCache is handled. And, when we handle LRU list of page_cgroup, we do following. pc = lookup_page_cgroup(page); lock_page_cgroup(pc); .....................(1) mz = page_cgroup_zoneinfo(pc); spin_lock(&mz->lru_lock); .....add to LRU spin_unlock(&mz->lru_lock); unlock_page_cgroup(pc); But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock. So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct. This is a trial to remove this dirty nesting of locks. This patch changes mz->lru_lock to be zone->lru_lock. Then, above sequence will be written as spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU mem_cgroup_add/remove/etc_lru() { pc = lookup_page_cgroup(page); mz = page_cgroup_zoneinfo(pc); if (PageCgroupUsed(pc)) { ....add to LRU } spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU This is much simpler. (*) We're safe even if we don't take lock_page_cgroup(pc). Because.. 1. When pc->mem_cgroup can be modified. - at charge. - at account_move(). 2. at charge the PCG_USED bit is not set before pc->mem_cgroup is fixed. 3. at account_move() the page is isolated and not on LRU. Pros. - easy for maintenance. - memcg can make use of laziness of pagevec. - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup. - LRU status of memcg will be synchronized with global LRU's one. - # of locks are reduced. - account_move() is simplified very much. Cons. - may increase cost of LRU rotation. (no impact if memcg is not configured.) Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 05:08:01 +03:00
mem_cgroup_rotate_lru_list(page, LRU_UNEVICTABLE);
if (page_evictable(page, NULL))
goto retry;
}
}
/**
* scan_mapping_unevictable_pages - scan an address space for evictable pages
* @mapping: struct address_space to scan for evictable pages
*
* Scan all pages in mapping. Check unevictable pages for
* evictability and move them to the appropriate zone lru list.
*/
void scan_mapping_unevictable_pages(struct address_space *mapping)
{
pgoff_t next = 0;
pgoff_t end = (i_size_read(mapping->host) + PAGE_CACHE_SIZE - 1) >>
PAGE_CACHE_SHIFT;
struct zone *zone;
struct pagevec pvec;
if (mapping->nrpages == 0)
return;
pagevec_init(&pvec, 0);
while (next < end &&
pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE)) {
int i;
int pg_scanned = 0;
zone = NULL;
for (i = 0; i < pagevec_count(&pvec); i++) {
struct page *page = pvec.pages[i];
pgoff_t page_index = page->index;
struct zone *pagezone = page_zone(page);
pg_scanned++;
if (page_index > next)
next = page_index;
next++;
if (pagezone != zone) {
if (zone)
spin_unlock_irq(&zone->lru_lock);
zone = pagezone;
spin_lock_irq(&zone->lru_lock);
}
if (PageLRU(page) && PageUnevictable(page))
check_move_unevictable_page(page, zone);
}
if (zone)
spin_unlock_irq(&zone->lru_lock);
pagevec_release(&pvec);
count_vm_events(UNEVICTABLE_PGSCANNED, pg_scanned);
}
}
/**
* scan_zone_unevictable_pages - check unevictable list for evictable pages
* @zone - zone of which to scan the unevictable list
*
* Scan @zone's unevictable LRU lists to check for pages that have become
* evictable. Move those that have to @zone's inactive list where they
* become candidates for reclaim, unless shrink_inactive_zone() decides
* to reactivate them. Pages that are still unevictable are rotated
* back onto @zone's unevictable list.
*/
#define SCAN_UNEVICTABLE_BATCH_SIZE 16UL /* arbitrary lock hold batch size */
static void scan_zone_unevictable_pages(struct zone *zone)
{
struct list_head *l_unevictable = &zone->lru[LRU_UNEVICTABLE].list;
unsigned long scan;
unsigned long nr_to_scan = zone_page_state(zone, NR_UNEVICTABLE);
while (nr_to_scan > 0) {
unsigned long batch_size = min(nr_to_scan,
SCAN_UNEVICTABLE_BATCH_SIZE);
spin_lock_irq(&zone->lru_lock);
for (scan = 0; scan < batch_size; scan++) {
struct page *page = lru_to_page(l_unevictable);
if (!trylock_page(page))
continue;
prefetchw_prev_lru_page(page, l_unevictable, flags);
if (likely(PageLRU(page) && PageUnevictable(page)))
check_move_unevictable_page(page, zone);
unlock_page(page);
}
spin_unlock_irq(&zone->lru_lock);
nr_to_scan -= batch_size;
}
}
/**
* scan_all_zones_unevictable_pages - scan all unevictable lists for evictable pages
*
* A really big hammer: scan all zones' unevictable LRU lists to check for
* pages that have become evictable. Move those back to the zones'
* inactive list where they become candidates for reclaim.
* This occurs when, e.g., we have unswappable pages on the unevictable lists,
* and we add swap to the system. As such, it runs in the context of a task
* that has possibly/probably made some previously unevictable pages
* evictable.
*/
static void scan_all_zones_unevictable_pages(void)
{
struct zone *zone;
for_each_zone(zone) {
scan_zone_unevictable_pages(zone);
}
}
/*
* scan_unevictable_pages [vm] sysctl handler. On demand re-scan of
* all nodes' unevictable lists for evictable pages
*/
unsigned long scan_unevictable_pages;
int scan_unevictable_handler(struct ctl_table *table, int write,
void __user *buffer,
size_t *length, loff_t *ppos)
{
proc_doulongvec_minmax(table, write, buffer, length, ppos);
if (write && *(unsigned long *)table->data)
scan_all_zones_unevictable_pages();
scan_unevictable_pages = 0;
return 0;
}
/*
* per node 'scan_unevictable_pages' attribute. On demand re-scan of
* a specified node's per zone unevictable lists for evictable pages.
*/
static ssize_t read_scan_unevictable_node(struct sys_device *dev,
struct sysdev_attribute *attr,
char *buf)
{
return sprintf(buf, "0\n"); /* always zero; should fit... */
}
static ssize_t write_scan_unevictable_node(struct sys_device *dev,
struct sysdev_attribute *attr,
const char *buf, size_t count)
{
struct zone *node_zones = NODE_DATA(dev->id)->node_zones;
struct zone *zone;
unsigned long res;
unsigned long req = strict_strtoul(buf, 10, &res);
if (!req)
return 1; /* zero is no-op */
for (zone = node_zones; zone - node_zones < MAX_NR_ZONES; ++zone) {
if (!populated_zone(zone))
continue;
scan_zone_unevictable_pages(zone);
}
return 1;
}
static SYSDEV_ATTR(scan_unevictable_pages, S_IRUGO | S_IWUSR,
read_scan_unevictable_node,
write_scan_unevictable_node);
int scan_unevictable_register_node(struct node *node)
{
return sysdev_create_file(&node->sysdev, &attr_scan_unevictable_pages);
}
void scan_unevictable_unregister_node(struct node *node)
{
sysdev_remove_file(&node->sysdev, &attr_scan_unevictable_pages);
}