WSL2-Linux-Kernel/tools/perf/tests/builtin-test.c

497 строки
9.7 KiB
C
Исходник Обычный вид История

perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
/*
* builtin-test.c
*
* Builtin regression testing command: ever growing number of sanity tests
*/
#include <unistd.h>
#include <string.h>
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
#include "builtin.h"
#include "hist.h"
perf test: Allow skipping tests Sometimes a test is problematic for some reason and one wants to skip it, for instance: [root@sandy ~]# perf test 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: function is_writable_pte not defined Segmentation fault (core dumped) So now we can use -s/--skip while the problematic tests are being fixed, allowing us to test all the other entries: [root@sandy ~]# perf test -s 5 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Skip (user override) 6: x86 rdpmc test : Ok 7: Validate PERF_RECORD_* events & perf_sample fields : Ok 8: Test perf pmu format parsing : Ok 9: Test dso data interface : Ok 10: roundtrip evsel->name check : Ok 11: Check parsing of sched tracepoints fields : Ok 12: Generate and check syscalls:sys_enter_open event fields: Ok 13: struct perf_event_attr setup : Ok 14: Test matching and linking mutliple hists : Ok 15: Try 'use perf' in python, checking link problems : Ok [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24 23:22:55 +04:00
#include "intlist.h"
#include "tests.h"
#include "debug.h"
#include "color.h"
#include <subcmd/parse-options.h>
#include "symbol.h"
static bool dont_fork;
struct test __weak arch_tests[] = {
{
.func = NULL,
},
};
static struct test generic_tests[] = {
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
{
.desc = "vmlinux symtab matches kallsyms",
.func = test__vmlinux_matches_kallsyms,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Detect openat syscall event",
.func = test__openat_syscall_event,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Detect openat syscall event on all cpus",
.func = test__openat_syscall_event_on_all_cpus,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Read samples using the mmap interface",
.func = test__basic_mmap,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Parse event definition strings",
.func = test__parse_events,
},
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 17:13:50 +04:00
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "PERF_RECORD_* events & perf_sample fields",
perf test: Validate PERF_RECORD_ events and perf_sample fields This new test will validate these new routines extracted from 'perf record': - perf_evlist__config_attrs - perf_evlist__prepare_workload - perf_evlist__start_workload In addition to several other perf_evlist methods. It consists of starting a simple workload, setting up just one event to monitor ("cycles") requesting that several PERF_SAMPLE_ fields be present in all events. It then will check that the expected PERF_RECORD_ events are produced and will sanity check all its fields. Some checks performed: . PERF_SAMPLE_TIME monotonically increases. . PERF_SAMPLE_CPU is the one requested with sched_setaffinity . PERF_SAMPLE_TID and PERF_SAMPLE_PID matches the one we forked in perf_evlist__prepare_workload and that is stored in evlist->workload.pid . For the events where these fields are also present in its pre-sample_id_all fields (e.g. event->mmap.pid), that they are what is expected too. . That we get a bunch of mmaps: PATH/libcSUFFIX PATH/ldSUFFIX [vdso] PATH/sleep Example: [root@emilia ~]# taskset -c 3,4 perf test -v1 perf_sample 6: Validate PERF_RECORD_* events & perf_sample fields: --- start --- 7159480799825 3 PERF_RECORD_SAMPLE 7159480805584 3 PERF_RECORD_SAMPLE 7159480807814 3 PERF_RECORD_SAMPLE 7159480810430 3 PERF_RECORD_SAMPLE 7159480861511 3 PERF_RECORD_MMAP 8086/8086: [0x7fffffffd000(0x2000) @ 0x7fffffffd000]: //anon 7159481052516 3 PERF_RECORD_COMM: sleep:8086 7159481070188 3 PERF_RECORD_MMAP 8086/8086: [0x400000(0x6000) @ 0]: /bin/sleep 7159481077104 3 PERF_RECORD_MMAP 8086/8086: [0x3d06400000(0x221000) @ 0]: /lib64/ld-2.12.so 7159481092912 3 PERF_RECORD_MMAP 8086/8086: [0x7fff1adff000(0x1000) @ 0x7fff1adff000]: [vdso] 7159481196779 3 PERF_RECORD_MMAP 8086/8086: [0x3d06800000(0x37f000) @ 0]: /lib64/libc-2.12.so 7160481558435 3 PERF_RECORD_EXIT(8086:8086):(8086:8086) ---- end ---- Validate PERF_RECORD_* events & perf_sample fields: Ok [root@emilia ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-svag18v2z4idas0dyz3umjpq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-12-02 17:13:50 +04:00
.func = test__PERF_RECORD,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Parse perf pmu format",
.func = test__pmu,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "DSO data read",
.func = test__dso_data,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "DSO data cache",
.func = test__dso_data_cache,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "DSO data reopen",
.func = test__dso_data_reopen,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Roundtrip evsel->name",
.func = test__perf_evsel__roundtrip_name_test,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Parse sched tracepoints fields",
.func = test__perf_evsel__tp_sched_test,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "syscalls:sys_enter_openat event fields",
.func = test__syscall_openat_tp_fields,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Setup struct perf_event_attr",
.func = test__attr,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Match and link multiple hists",
.func = test__hists_link,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "'import perf' in python",
.func = test__python_use,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Breakpoint overflow signal handler",
.func = test__bp_signal,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Breakpoint overflow sampling",
.func = test__bp_signal_overflow,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Number of exit events of a simple workload",
.func = test__task_exit,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Software clock events period values",
.func = test__sw_clock_freq,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Object code reading",
.func = test__code_reading,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Sample parsing",
.func = test__sample_parsing,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Use a dummy software event to keep tracking",
.func = test__keep_tracking,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Parse with no sample_id_all bit set",
.func = test__parse_no_sample_id_all,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Filter hist entries",
.func = test__hists_filter,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Lookup mmap thread",
.func = test__mmap_thread_lookup,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Share thread mg",
.func = test__thread_mg_share,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Sort output of hist entries",
.func = test__hists_output,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Cumulate child hist entries",
.func = test__hists_cumulate,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Track with sched_switch",
.func = test__switch_tracking,
},
{
.desc = "Filter fds with revents mask in a fdarray",
.func = test__fdarray__filter,
},
{
.desc = "Add fd to a fdarray, making it autogrow",
.func = test__fdarray__add,
},
perf tools: Add kmod_path__parse function Provides united way of parsing kernel module path into several components. The new kmod_path__parse function and few defines: int __kmod_path__parse(struct kmod_path *m, const char *path, bool alloc_name, bool alloc_ext); #define kmod_path__parse(__m, __p) __kmod_path__parse(__m, __p, false, false) #define kmod_path__parse_name(__m, __p) __kmod_path__parse(__m, __p, true , false) #define kmod_path__parse_ext(__m, __p) __kmod_path__parse(__m, __p, false, true) parse kernel module @path and updates @m argument like: @comp - true if @path contains supported compression suffix, false otherwise @kmod - true if @path contains '.ko' suffix in right position, false otherwise @name - if (@alloc_name && @kmod) is true, it contains strdup-ed base name of the kernel module without suffixes, otherwise strudup-ed base name of @path @ext - if (@alloc_ext && @comp) is true, it contains strdup-ed string the compression suffix It returns 0 if there's no strdup error, -ENOMEM otherwise. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-9t6eqg8j610r94l743hkntiv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-05 17:40:25 +03:00
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "kmod_path__parse",
perf tools: Add kmod_path__parse function Provides united way of parsing kernel module path into several components. The new kmod_path__parse function and few defines: int __kmod_path__parse(struct kmod_path *m, const char *path, bool alloc_name, bool alloc_ext); #define kmod_path__parse(__m, __p) __kmod_path__parse(__m, __p, false, false) #define kmod_path__parse_name(__m, __p) __kmod_path__parse(__m, __p, true , false) #define kmod_path__parse_ext(__m, __p) __kmod_path__parse(__m, __p, false, true) parse kernel module @path and updates @m argument like: @comp - true if @path contains supported compression suffix, false otherwise @kmod - true if @path contains '.ko' suffix in right position, false otherwise @name - if (@alloc_name && @kmod) is true, it contains strdup-ed base name of the kernel module without suffixes, otherwise strudup-ed base name of @path @ext - if (@alloc_ext && @comp) is true, it contains strdup-ed string the compression suffix It returns 0 if there's no strdup error, -ENOMEM otherwise. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-9t6eqg8j610r94l743hkntiv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-05 17:40:25 +03:00
.func = test__kmod_path__parse,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Thread map",
.func = test__thread_map,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "LLVM search and compile",
.func = test__llvm,
perf test: Print result for each LLVM subtest Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:48 +03:00
.subtest = {
.skip_if_fail = true,
.get_nr = test__llvm_subtest_get_nr,
.get_desc = test__llvm_subtest_get_desc,
},
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Session topology",
.func = test_session_topology,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "BPF filter",
.func = test__bpf,
.subtest = {
.skip_if_fail = true,
.get_nr = test__bpf_subtest_get_nr,
.get_desc = test__bpf_subtest_get_desc,
},
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Synthesize thread map",
.func = test__thread_map_synthesize,
},
{
.desc = "Remove thread map",
.func = test__thread_map_remove,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Synthesize cpu map",
.func = test__cpu_map_synthesize,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Synthesize stat config",
.func = test__synthesize_stat_config,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Synthesize stat",
.func = test__synthesize_stat,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Synthesize stat round",
.func = test__synthesize_stat_round,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Synthesize attr update",
.func = test__event_update,
},
perf tests: Add test to check for event times This test creates software event 'cpu-clock' attaches it in several ways and checks that enabled and running times match. Committer notes: Testing it: [acme@jouet linux]$ perf test -v times 44: Test events times : --- start --- test child forked, pid 27170 attaching to spawned child, enable on exec OK : ena 307328, run 307328 attaching to current thread as enabled OK : ena 7826, run 7826 attaching to current thread as disabled OK : ena 738, run 738 attaching to CPU 0 as enabled SKIP : not enough rights attaching to CPU 0 as enabled SKIP : not enough rights test child finished with -2 ---- end ---- Test events times: Skip [acme@jouet linux]$ [root@jouet ~]# perf test times 44: Test events times : Ok [root@jouet ~]# perf test -v times 44: Test events times : --- start --- test child forked, pid 27306 attaching to spawned child, enable on exec OK : ena 479290, run 479290 attaching to current thread as enabled OK : ena 11356, run 11356 attaching to current thread as disabled OK : ena 987, run 987 attaching to CPU 0 as enabled OK : ena 3717, run 3717 attaching to CPU 0 as enabled OK : ena 2323, run 2323 test child finished with 0 ---- end ---- Test events times: Ok [root@jouet ~]# Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1458823940-24583-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-24 15:52:20 +03:00
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Event times",
perf tests: Add test to check for event times This test creates software event 'cpu-clock' attaches it in several ways and checks that enabled and running times match. Committer notes: Testing it: [acme@jouet linux]$ perf test -v times 44: Test events times : --- start --- test child forked, pid 27170 attaching to spawned child, enable on exec OK : ena 307328, run 307328 attaching to current thread as enabled OK : ena 7826, run 7826 attaching to current thread as disabled OK : ena 738, run 738 attaching to CPU 0 as enabled SKIP : not enough rights attaching to CPU 0 as enabled SKIP : not enough rights test child finished with -2 ---- end ---- Test events times: Skip [acme@jouet linux]$ [root@jouet ~]# perf test times 44: Test events times : Ok [root@jouet ~]# perf test -v times 44: Test events times : --- start --- test child forked, pid 27306 attaching to spawned child, enable on exec OK : ena 479290, run 479290 attaching to current thread as enabled OK : ena 11356, run 11356 attaching to current thread as disabled OK : ena 987, run 987 attaching to CPU 0 as enabled OK : ena 3717, run 3717 attaching to CPU 0 as enabled OK : ena 2323, run 2323 test child finished with 0 ---- end ---- Test events times: Ok [root@jouet ~]# Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1458823940-24583-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-24 15:52:20 +03:00
.func = test__event_times,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Read backward ring buffer",
.func = test__backward_ring_buffer,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Print cpu map",
.func = test__cpu_map_print,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Probe SDT events",
.func = test__sdt_event,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "is_printable_array",
.func = test__is_printable_array,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "Print bitmap",
.func = test__bitmap_print,
},
{
perf test: Remove "test" and similar strings from test descriptions Having "test" in almost all test descriptions is redundant, simplify it removing and rewriting tests with such descriptions. End result: # perf test 1: vmlinux symtab matches kallsyms : Ok 2: Detect openat syscall event : Ok 3: Detect openat syscall event on all cpus : Ok 4: Read samples using the mmap interface : Ok 5: Parse event definition strings : Ok 6: PERF_RECORD_* events & perf_sample fields : Ok 7: Parse perf pmu format : Ok 8: DSO data read : Ok 9: DSO data cache : Ok 10: DSO data reopen : Ok 11: Roundtrip evsel->name : Ok 12: Parse sched tracepoints fields : Ok 13: syscalls:sys_enter_openat event fields : Ok 14: Setup struct perf_event_attr : Ok 15: Match and link multiple hists : Ok 16: 'import perf' in python : Ok 17: Breakpoint overflow signal handler : Ok 18: Breakpoint overflow sampling : Ok 19: Number of exit events of a simple workload : Ok 20: Software clock events period values : Ok 21: Object code reading : Ok 22: Sample parsing : Ok 23: Use a dummy software event to keep tracking: Ok 24: Parse with no sample_id_all bit set : Ok 25: Filter hist entries : Ok 26: Lookup mmap thread : Ok 27: Share thread mg : Ok 28: Sort output of hist entries : Ok 29: Cumulate child hist entries : Ok 30: Track with sched_switch : Ok 31: Filter fds with revents mask in a fdarray : Ok 32: Add fd to a fdarray, making it autogrow : Ok 33: kmod_path__parse : Ok 34: Thread map : Ok 35: LLVM search and compile : 35.1: Basic BPF llvm compile : Ok 35.2: kbuild searching : Ok 35.3: Compile source for BPF prologue generation: Ok 35.4: Compile source for BPF relocation : Ok 36: Session topology : Ok 37: BPF filter : 37.1: Basic BPF filtering : Ok 37.2: BPF prologue generation : Ok 37.3: BPF relocation checker : Ok 38: Synthesize thread map : Ok 39: Synthesize cpu map : Ok 40: Synthesize stat config : Ok 41: Synthesize stat : Ok 42: Synthesize stat round : Ok 43: Synthesize attr update : Ok 44: Event times : Ok 45: Read backward ring buffer : Ok 46: Print cpu map : Ok 47: Probe SDT events : Ok 48: is_printable_array : Ok 49: Print bitmap : Ok 50: perf hooks : Ok 51: x86 rdpmc : Ok 52: Convert perf time to TSC : Ok 53: DWARF unwind : Ok 54: x86 instruction decoder - new instructions : Ok 55: Intel cqm nmi context read : Skip # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 18:38:14 +03:00
.desc = "perf hooks",
.func = test__perf_hooks,
},
{
.desc = "builtin clang support",
.func = test__clang,
.subtest = {
.skip_if_fail = true,
.get_nr = test__clang_subtest_get_nr,
.get_desc = test__clang_subtest_get_desc,
}
},
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
{
.func = NULL,
},
};
static struct test *tests[] = {
generic_tests,
arch_tests,
};
static bool perf_test__matches(struct test *test, int curr, int argc, const char *argv[])
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
{
int i;
if (argc == 0)
return true;
for (i = 0; i < argc; ++i) {
char *end;
long nr = strtoul(argv[i], &end, 10);
if (*end == '\0') {
if (nr == curr + 1)
return true;
continue;
}
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
if (strcasestr(test->desc, argv[i]))
return true;
}
return false;
}
static int run_test(struct test *test, int subtest)
{
int status, err = -1, child = dont_fork ? 0 : fork();
char sbuf[STRERR_BUFSIZE];
if (child < 0) {
pr_err("failed to fork test: %s\n",
str_error_r(errno, sbuf, sizeof(sbuf)));
return -1;
}
if (!child) {
if (!dont_fork) {
pr_debug("test child forked, pid %d\n", getpid());
if (!verbose) {
int nullfd = open("/dev/null", O_WRONLY);
if (nullfd >= 0) {
close(STDERR_FILENO);
close(STDOUT_FILENO);
dup2(nullfd, STDOUT_FILENO);
dup2(STDOUT_FILENO, STDERR_FILENO);
close(nullfd);
}
} else {
signal(SIGSEGV, sighandler_dump_stack);
signal(SIGFPE, sighandler_dump_stack);
perf test: Mute test cases error messages if verbose == 0 Sometimes error messages in breaks the pretty output of 'perf test'. For example: # mv /lib/modules/4.3.0-rc4+/build/vmlinux{,.bak} # perf test LLVM BPF 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation :Failed to find the path for kernel: No such file or directory FAILED! This patch mute test cases thoroughly by redirect their stdout and stderr to /dev/null when verbose == 0. After applying this patch: # ./perf test LLVM BPF 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : FAILED! # ./perf test -v LLVM BPF 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : --- start --- test child forked, pid 13183 Kernel build dir is set to /lib/modules/4.3.0-rc4+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc4+/build ... bpf: config 'func=null_lseek file->f_mode offset orig' is ok Looking at the vmlinux_path (7 entries long) Failed to find the path for kernel: No such file or directory bpf_probe: failed to convert perf probe eventsFailed to add events selected by BPF test child finished with -1 ---- end ---- Test BPF filter subtest 1: FAILED! Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-6-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:50 +03:00
}
}
err = test->func(subtest);
if (!dont_fork)
exit(err);
}
if (!dont_fork) {
wait(&status);
if (WIFEXITED(status)) {
err = (signed char)WEXITSTATUS(status);
pr_debug("test child finished with %d\n", err);
} else if (WIFSIGNALED(status)) {
err = -1;
pr_debug("test child interrupted\n");
}
}
return err;
}
#define for_each_test(j, t) \
for (j = 0; j < ARRAY_SIZE(tests); j++) \
for (t = &tests[j][0]; t->func; t++)
perf test: Print result for each LLVM subtest Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:48 +03:00
static int test_and_print(struct test *t, bool force_skip, int subtest)
{
int err;
if (!force_skip) {
pr_debug("\n--- start ---\n");
err = run_test(t, subtest);
pr_debug("---- end ----\n");
} else {
pr_debug("\n--- force skipped ---\n");
err = TEST_SKIP;
}
if (!t->subtest.get_nr)
pr_debug("%s:", t->desc);
else
pr_debug("%s subtest %d:", t->desc, subtest);
switch (err) {
case TEST_OK:
pr_info(" Ok\n");
break;
case TEST_SKIP:
color_fprintf(stderr, PERF_COLOR_YELLOW, " Skip\n");
break;
case TEST_FAIL:
default:
color_fprintf(stderr, PERF_COLOR_RED, " FAILED!\n");
break;
}
return err;
}
perf test: Allow skipping tests Sometimes a test is problematic for some reason and one wants to skip it, for instance: [root@sandy ~]# perf test 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: function is_writable_pte not defined Segmentation fault (core dumped) So now we can use -s/--skip while the problematic tests are being fixed, allowing us to test all the other entries: [root@sandy ~]# perf test -s 5 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Skip (user override) 6: x86 rdpmc test : Ok 7: Validate PERF_RECORD_* events & perf_sample fields : Ok 8: Test perf pmu format parsing : Ok 9: Test dso data interface : Ok 10: roundtrip evsel->name check : Ok 11: Check parsing of sched tracepoints fields : Ok 12: Generate and check syscalls:sys_enter_open event fields: Ok 13: struct perf_event_attr setup : Ok 14: Test matching and linking mutliple hists : Ok 15: Try 'use perf' in python, checking link problems : Ok [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24 23:22:55 +04:00
static int __cmd_test(int argc, const char *argv[], struct intlist *skiplist)
{
struct test *t;
unsigned int j;
int i = 0;
int width = 0;
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
for_each_test(j, t) {
int len = strlen(t->desc);
if (width < len)
width = len;
}
for_each_test(j, t) {
int curr = i++, err;
if (!perf_test__matches(t, curr, argc, argv))
continue;
pr_info("%2d: %-*s:", i, width, t->desc);
perf test: Allow skipping tests Sometimes a test is problematic for some reason and one wants to skip it, for instance: [root@sandy ~]# perf test 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: function is_writable_pte not defined Segmentation fault (core dumped) So now we can use -s/--skip while the problematic tests are being fixed, allowing us to test all the other entries: [root@sandy ~]# perf test -s 5 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Skip (user override) 6: x86 rdpmc test : Ok 7: Validate PERF_RECORD_* events & perf_sample fields : Ok 8: Test perf pmu format parsing : Ok 9: Test dso data interface : Ok 10: roundtrip evsel->name check : Ok 11: Check parsing of sched tracepoints fields : Ok 12: Generate and check syscalls:sys_enter_open event fields: Ok 13: struct perf_event_attr setup : Ok 14: Test matching and linking mutliple hists : Ok 15: Try 'use perf' in python, checking link problems : Ok [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24 23:22:55 +04:00
if (intlist__find(skiplist, i)) {
color_fprintf(stderr, PERF_COLOR_YELLOW, " Skip (user override)\n");
continue;
}
perf test: Print result for each LLVM subtest Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-17 11:32:48 +03:00
if (!t->subtest.get_nr) {
test_and_print(t, false, -1);
} else {
int subn = t->subtest.get_nr();
/*
* minus 2 to align with normal testcases.
* For subtest we print additional '.x' in number.
* for example:
*
* 35: Test LLVM searching and compiling :
* 35.1: Basic BPF llvm compiling test : Ok
*/
int subw = width > 2 ? width - 2 : width;
bool skip = false;
int subi;
if (subn <= 0) {
color_fprintf(stderr, PERF_COLOR_YELLOW,
" Skip (not compiled in)\n");
continue;
}
pr_info("\n");
for (subi = 0; subi < subn; subi++) {
int len = strlen(t->subtest.get_desc(subi));
if (subw < len)
subw = len;
}
for (subi = 0; subi < subn; subi++) {
pr_info("%2d.%1d: %-*s:", i, subi + 1, subw,
t->subtest.get_desc(subi));
err = test_and_print(t, skip, subi);
if (err != TEST_OK && t->subtest.skip_if_fail)
skip = true;
}
}
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
}
return 0;
}
static int perf_test__list(int argc, const char **argv)
{
unsigned int j;
struct test *t;
int i = 0;
for_each_test(j, t) {
if (argc > 1 && !strstr(t->desc, argv[1]))
continue;
pr_info("%2d: %s\n", ++i, t->desc);
}
return 0;
}
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 02:15:03 +04:00
int cmd_test(int argc, const char **argv, const char *prefix __maybe_unused)
{
const char *test_usage[] = {
"perf test [<options>] [{list <test-name-fragment>|[<test-name-fragments>|<test-numbers>]}]",
NULL,
};
perf test: Allow skipping tests Sometimes a test is problematic for some reason and one wants to skip it, for instance: [root@sandy ~]# perf test 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: function is_writable_pte not defined Segmentation fault (core dumped) So now we can use -s/--skip while the problematic tests are being fixed, allowing us to test all the other entries: [root@sandy ~]# perf test -s 5 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Skip (user override) 6: x86 rdpmc test : Ok 7: Validate PERF_RECORD_* events & perf_sample fields : Ok 8: Test perf pmu format parsing : Ok 9: Test dso data interface : Ok 10: roundtrip evsel->name check : Ok 11: Check parsing of sched tracepoints fields : Ok 12: Generate and check syscalls:sys_enter_open event fields: Ok 13: struct perf_event_attr setup : Ok 14: Test matching and linking mutliple hists : Ok 15: Try 'use perf' in python, checking link problems : Ok [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24 23:22:55 +04:00
const char *skip = NULL;
const struct option test_options[] = {
perf test: Allow skipping tests Sometimes a test is problematic for some reason and one wants to skip it, for instance: [root@sandy ~]# perf test 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: function is_writable_pte not defined Segmentation fault (core dumped) So now we can use -s/--skip while the problematic tests are being fixed, allowing us to test all the other entries: [root@sandy ~]# perf test -s 5 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Skip (user override) 6: x86 rdpmc test : Ok 7: Validate PERF_RECORD_* events & perf_sample fields : Ok 8: Test perf pmu format parsing : Ok 9: Test dso data interface : Ok 10: roundtrip evsel->name check : Ok 11: Check parsing of sched tracepoints fields : Ok 12: Generate and check syscalls:sys_enter_open event fields: Ok 13: struct perf_event_attr setup : Ok 14: Test matching and linking mutliple hists : Ok 15: Try 'use perf' in python, checking link problems : Ok [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24 23:22:55 +04:00
OPT_STRING('s', "skip", &skip, "tests", "tests to skip"),
OPT_INCR('v', "verbose", &verbose,
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('F', "dont-fork", &dont_fork,
"Do not fork for testcase"),
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
OPT_END()
};
const char * const test_subcommands[] = { "list", NULL };
perf test: Allow skipping tests Sometimes a test is problematic for some reason and one wants to skip it, for instance: [root@sandy ~]# perf test 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: function is_writable_pte not defined Segmentation fault (core dumped) So now we can use -s/--skip while the problematic tests are being fixed, allowing us to test all the other entries: [root@sandy ~]# perf test -s 5 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Skip (user override) 6: x86 rdpmc test : Ok 7: Validate PERF_RECORD_* events & perf_sample fields : Ok 8: Test perf pmu format parsing : Ok 9: Test dso data interface : Ok 10: roundtrip evsel->name check : Ok 11: Check parsing of sched tracepoints fields : Ok 12: Generate and check syscalls:sys_enter_open event fields: Ok 13: struct perf_event_attr setup : Ok 14: Test matching and linking mutliple hists : Ok 15: Try 'use perf' in python, checking link problems : Ok [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24 23:22:55 +04:00
struct intlist *skiplist = NULL;
int ret = hists__init();
if (ret < 0)
return ret;
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
argc = parse_options_subcommand(argc, argv, test_options, test_subcommands, test_usage, 0);
if (argc >= 1 && !strcmp(argv[0], "list"))
return perf_test__list(argc, argv);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
symbol_conf.priv_size = sizeof(int);
symbol_conf.sort_by_name = true;
symbol_conf.try_vmlinux_path = true;
perf tools: Check recorded kernel version when finding vmlinux Currently vmlinux_path__init() only tries to find vmlinux file from current directory, /boot and some canonical directories with version number of the running kernel. This can be a problem when reporting old data recorded on a kernel version not running currently. We can use --symfs option for this but it's annoying for user to do it always. As we already have the info in the perf.data file, it can be changed to use it for the search automatically. Before: $ perf report ... # Samples: 4K of event 'cpu-clock' # Event count (approx.): 1067250000 # # Overhead Command Shared Object Symbol # ........ .......... ................. .............................. 71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction After: # Overhead Command Shared Object Symbol # ........ .......... ................. .................... 71.87% swapper [kernel.kallsyms] [k] native_safe_halt This requires to change signature of symbol__init() to receive struct perf_session_env *. Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 10:40:45 +04:00
if (symbol__init(NULL) < 0)
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
return -1;
perf test: Allow skipping tests Sometimes a test is problematic for some reason and one wants to skip it, for instance: [root@sandy ~]# perf test 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: bad op token { Warning: function is_writable_pte not defined Segmentation fault (core dumped) So now we can use -s/--skip while the problematic tests are being fixed, allowing us to test all the other entries: [root@sandy ~]# perf test -s 5 1: vmlinux symtab matches kallsyms : Ok 2: detect open syscall event : Ok 3: detect open syscall event on all cpus : Ok 4: read samples using the mmap interface : Ok 5: parse events tests : Skip (user override) 6: x86 rdpmc test : Ok 7: Validate PERF_RECORD_* events & perf_sample fields : Ok 8: Test perf pmu format parsing : Ok 9: Test dso data interface : Ok 10: roundtrip evsel->name check : Ok 11: Check parsing of sched tracepoints fields : Ok 12: Generate and check syscalls:sys_enter_open event fields: Ok 13: struct perf_event_attr setup : Ok 14: Test matching and linking mutliple hists : Ok 15: Try 'use perf' in python, checking link problems : Ok [root@sandy ~]# Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-klzd8p57jzdryafqkmlppcb1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-24 23:22:55 +04:00
if (skip != NULL)
skiplist = intlist__new(skip);
return __cmd_test(argc, argv, skiplist);
perf test: Initial regression testing command First an example with the first internal test: [acme@doppio linux-2.6-tip]$ perf test 1: vmlinux symtab matches kallsyms: Ok So it run just one test, that is "vmlinux symtab matches kallsyms", and it was successful. If we run it in verbose mode, we'll see details about errors and extra warnings for non-fatal problems: [acme@doppio linux-2.6-tip]$ perf test -v 1: vmlinux symtab matches kallsyms: --- start --- Looking at the vmlinux_path (5 entries long) No build_id in vmlinux, ignoring it No build_id in /boot/vmlinux, ignoring it No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols Maps only in vmlinux: ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 Maps in vmlinux with a different name in kallsyms: ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0 ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as: *ffffffffff600100-ffffffffff60012f 0 [kernel].2 ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6 ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8 Maps only in kallsyms: ffffffffff600130-ffffffffff6003ff 0 [kernel].4 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@doppio linux-2.6-tip]$ In the above case we only know the name of the non contiguous kernel ranges in the address space when reading the symbol information from the ELF symtab in vmlinux. The /proc/kallsyms file lack this, we only notice they are separate because there are modules after the kernel and after that more kernel functions, so we need to have a module rbtree backed by the module .ko path to get symtabs in the vmlinux case. The tool uses it to match by address to emit appropriate warning, but don't considers this fatal. The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left these cases just as extra info in verbose mode. The end of the sections also aren't in kallsyms, so we the symbols layer does another pass and sets the end addresses as the next map start minus one, which sometimes pads, causing harmless mismatches. But at least the symbols match, tested it by copying /proc/kallsyms to /tmp/kallsyms and doing changes to see if they were detected. This first test also should serve as a first stab at documenting the symbol library by providing a self contained example that exercises it together with comments about what is being done. More tests to check if actions done on a monitored app, like doing mmaps, etc, makes the kernel generate the expected events should be added next. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-30 01:58:32 +04:00
}