microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/arm/kernel/asm-offsets.c

185 строки
7.2 KiB
C
Исходник Обычный вид История

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Copyright (C) 1995-2003 Russell King
* 2001-2002 Keith Owens
*
* Generate definitions needed by assembly language modules.
* This code generates raw asm output which is post-processed to extract
* and format the required data.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854 These stock GCC versions miscompile the kernel by incorrectly optimising the function epilogue code - by first increasing the stack pointer, and then loading entries from below the stack. This means that an opportune interrupt or exception will corrupt the current function's saved state, which may result in the parent function seeing different register values. As this bug has been known to result in corrupted filesystems, and these buggy compiler versions seem to be frequently used, we have little option but to blacklist these compiler versions. Distributions may have fixed PR58854, but as their compilers are totally indistinguishable from the buggy versions, it is unfortunate that this also results in those also being blacklisted. Given the filesystem corruption potential of the original, this is the lesser evil. People who want to build with their fixed compiler versions will need to adjust the kernel source. (Distros need to think about the implications of fixing such a compiler bug, and consider how to ensure that their fixed compiler versions can be detected if they wish to avoid this.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-16 01:37:13 +04:00
#include <linux/compiler.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#include <linux/sched.h>
#include <linux/mm.h>
ARM: dma-mapping: provide per-cpu type map/unmap functions Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2009-11-26 19:19:58 +03:00
#include <linux/dma-mapping.h>
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:47:42 +04:00
#ifdef CONFIG_KVM_ARM_HOST
#include <linux/kvm_host.h>
#endif
ARM: pm: add generic CPU suspend/resume support This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Tested-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-06 18:48:39 +03:00
#include <asm/cacheflush.h>
ARM: move cache/processor/fault glue to separate include files This allows the cache/processor/fault glue to be more easily used from assembler code. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-06 18:32:24 +03:00
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
[ARM] Include asm/elf.h instead of asm/procinfo.h These files want to provide/access ELF hwcap information, so should be including asm/elf.h rather than asm/procinfo.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-09 17:20:47 +03:00
#include <asm/procinfo.h>
ARM: kernel: implement stack pointer save array through MPIDR hashing Current implementation of cpu_{suspend}/cpu_{resume} relies on the MPIDR to index the array of pointers where the context is saved and restored. The current approach works as long as the MPIDR can be considered a linear index, so that the pointers array can simply be dereferenced by using the MPIDR[7:0] value. On ARM multi-cluster systems, where the MPIDR may not be a linear index, to properly dereference the stack pointer array, a mapping function should be applied to it so that it can be used for arrays look-ups. This patch adds code in the cpu_{suspend}/cpu_{resume} implementation that relies on shifting and ORing hashing method to map a MPIDR value to a set of buckets precomputed at boot to have a collision free mapping from MPIDR to context pointers. The hashing algorithm must be simple, fast, and implementable with few instructions since in the cpu_resume path the mapping is carried out with the MMU off and the I-cache off, hence code and data are fetched from DRAM with no-caching available. Simplicity is counterbalanced with a little increase of memory (allocated dynamically) for stack pointers buckets, that should be anyway fairly limited on most systems. Memory for context pointers is allocated in a early_initcall with size precomputed and stashed previously in kernel data structures. Memory for context pointers is allocated through kmalloc; this guarantees contiguous physical addresses for the allocated memory which is fundamental to the correct functioning of the resume mechanism that relies on the context pointer array to be a chunk of contiguous physical memory. Virtual to physical address conversion for the context pointer array base is carried out at boot to avoid fiddling with virt_to_phys conversions in the cpu_resume path which is quite fragile and should be optimized to execute as few instructions as possible. Virtual and physical context pointer base array addresses are stashed in a struct that is accessible from assembly using values generated through the asm-offsets.c mechanism. Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Colin Cross <ccross@android.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2013-05-16 13:34:30 +04:00
#include <asm/suspend.h>
ARM: 8330/1: add VDSO user-space code Place VDSO-related user-space code in arch/arm/kernel/vdso/. It is almost completely written in C with some assembly helpers to load the data page address, sample the counter, and fall back to system calls when necessary. The VDSO can service gettimeofday and clock_gettime when CONFIG_ARM_ARCH_TIMER is enabled and the architected timer is present (and correctly configured). It reads the CP15-based virtual counter to compute high-resolution timestamps. Of particular note is that a post-processing step ("vdsomunge") is necessary to produce a shared object which is architecturally allowed to be used by both soft- and hard-float EABI programs. The 2012 edition of the ARM ABI defines Tag_ABI_VFP_args = 3 "Code is compatible with both the base and VFP variants; the user did not permit non-variadic functions to pass FP parameters/results." Unfortunately current toolchains do not support this tag, which is ideally what we would use. The best available option is to ensure that both EF_ARM_ABI_FLOAT_SOFT and EF_ARM_ABI_FLOAT_HARD are unset in the ELF header's e_flags, indicating that the shared object is "old" and should be accepted for backward compatibility's sake. While binutils < 2.24 appear to produce a vdso.so with both flags clear, 2.24 always sets EF_ARM_ABI_FLOAT_SOFT, with no way to inhibit this behavior. So we have to fix things up with a custom post-processing step. In fact, the VDSO code in glibc does much less validation (including checking these flags) than the code for handling conventional file-backed shared libraries, so this is a bit moot unless glibc's VDSO code becomes more strict. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-25 21:14:22 +03:00
#include <asm/vdso_datapage.h>
ARM: 7114/1: cache-l2x0: add resume entry for l2 in secure mode we save the l2x0 registers at the first initialization, and platform codes can get them to restore l2x0 status after wakeup. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-30 17:43:12 +04:00
#include <asm/hardware/cache-l2x0.h>
arm: use kbuild.h instead of macros in asm-offsets.c Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 12:03:59 +04:00
#include <linux/kbuild.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Make sure that the compiler and target are compatible.
*/
#if defined(__APCS_26__)
#error Sorry, your compiler targets APCS-26 but this kernel requires APCS-32
#endif
/*
* GCC 3.0, 3.1: general bad code generation.
* GCC 3.2.0: incorrect function argument offset calculation.
* GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
* (http://gcc.gnu.org/PR8896) and incorrect structure
* initialisation in fs/jffs2/erase.c
ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854 These stock GCC versions miscompile the kernel by incorrectly optimising the function epilogue code - by first increasing the stack pointer, and then loading entries from below the stack. This means that an opportune interrupt or exception will corrupt the current function's saved state, which may result in the parent function seeing different register values. As this bug has been known to result in corrupted filesystems, and these buggy compiler versions seem to be frequently used, we have little option but to blacklist these compiler versions. Distributions may have fixed PR58854, but as their compilers are totally indistinguishable from the buggy versions, it is unfortunate that this also results in those also being blacklisted. Given the filesystem corruption potential of the original, this is the lesser evil. People who want to build with their fixed compiler versions will need to adjust the kernel source. (Distros need to think about the implications of fixing such a compiler bug, and consider how to ensure that their fixed compiler versions can be detected if they wish to avoid this.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-16 01:37:13 +04:00
* GCC 4.8.0-4.8.2: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854
* miscompiles find_get_entry(), and can result in EXT3 and EXT4
* filesystem corruption (possibly other FS too).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
*/
ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854 These stock GCC versions miscompile the kernel by incorrectly optimising the function epilogue code - by first increasing the stack pointer, and then loading entries from below the stack. This means that an opportune interrupt or exception will corrupt the current function's saved state, which may result in the parent function seeing different register values. As this bug has been known to result in corrupted filesystems, and these buggy compiler versions seem to be frequently used, we have little option but to blacklist these compiler versions. Distributions may have fixed PR58854, but as their compilers are totally indistinguishable from the buggy versions, it is unfortunate that this also results in those also being blacklisted. Given the filesystem corruption potential of the original, this is the lesser evil. People who want to build with their fixed compiler versions will need to adjust the kernel source. (Distros need to think about the implications of fixing such a compiler bug, and consider how to ensure that their fixed compiler versions can be detected if they wish to avoid this.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-16 01:37:13 +04:00
#ifdef __GNUC__
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:04:09 +03:00
#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#error Your compiler is too buggy; it is known to miscompile kernels.
ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854 These stock GCC versions miscompile the kernel by incorrectly optimising the function epilogue code - by first increasing the stack pointer, and then loading entries from below the stack. This means that an opportune interrupt or exception will corrupt the current function's saved state, which may result in the parent function seeing different register values. As this bug has been known to result in corrupted filesystems, and these buggy compiler versions seem to be frequently used, we have little option but to blacklist these compiler versions. Distributions may have fixed PR58854, but as their compilers are totally indistinguishable from the buggy versions, it is unfortunate that this also results in those also being blacklisted. Given the filesystem corruption potential of the original, this is the lesser evil. People who want to build with their fixed compiler versions will need to adjust the kernel source. (Distros need to think about the implications of fixing such a compiler bug, and consider how to ensure that their fixed compiler versions can be detected if they wish to avoid this.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-16 01:37:13 +04:00
#error Known good compilers: 3.3, 4.x
#endif
#if GCC_VERSION >= 40800 && GCC_VERSION < 40803
#error Your compiler is too buggy; it is known to miscompile kernels
#error and result in filesystem corruption and oopses.
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#endif
int main(void)
{
DEFINE(TSK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
ARM: stack protector: change the canary value per task A new random value for the canary is stored in the task struct whenever a new task is forked. This is meant to allow for different canary values per task. On ARM, GCC expects the canary value to be found in a global variable called __stack_chk_guard. So this variable has to be updated with the value stored in the task struct whenever a task switch occurs. Because the variable GCC expects is global, this cannot work on SMP unfortunately. So, on SMP, the same initial canary value is kept throughout, making this feature a bit less effective although it is still useful. One way to overcome this GCC limitation would be to locate the __stack_chk_guard variable into a memory page of its own for each CPU, and then use TLB locking to have each CPU see its own page at the same virtual address for each of them. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2010-06-08 05:50:33 +04:00
#ifdef CONFIG_CC_STACKPROTECTOR
DEFINE(TSK_STACK_CANARY, offsetof(struct task_struct, stack_canary));
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
BLANK();
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_CPU_DOMAIN, offsetof(struct thread_info, cpu_domain));
DEFINE(TI_CPU_SAVE, offsetof(struct thread_info, cpu_context));
DEFINE(TI_USED_CP, offsetof(struct thread_info, used_cp));
DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value));
DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate));
ARM: Don't unconditionally bloat thread_info There is no point reserving space at the bottom of the kernel stack for per-thread crunch state, and per-thread VFP state if these are not being supported by the kernel being built. Remove these members from the thread union when these features are disabled. Reported-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-29 14:16:59 +04:00
#ifdef CONFIG_VFP
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate));
ARM: vfp: fix a hole in VFP thread migration Fix a hole in the VFP thread migration. Lets define two threads. Thread 1, we'll call 'interesting_thread' which is a thread which is running on CPU0, using VFP (so vfp_current_hw_state[0] = &interesting_thread->vfpstate) and gets migrated off to CPU1, where it continues execution of VFP instructions. Thread 2, we'll call 'new_cpu0_thread' which is the thread which takes over on CPU0. This has also been using VFP, and last used VFP on CPU0, but doesn't use it again. The following code will be executed twice: cpu = thread->cpu; /* * On SMP, if VFP is enabled, save the old state in * case the thread migrates to a different CPU. The * restoring is done lazily. */ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { vfp_save_state(vfp_current_hw_state[cpu], fpexc); vfp_current_hw_state[cpu]->hard.cpu = cpu; } /* * Thread migration, just force the reloading of the * state on the new CPU in case the VFP registers * contain stale data. */ if (thread->vfpstate.hard.cpu != cpu) vfp_current_hw_state[cpu] = NULL; The first execution will be on CPU0 to switch away from 'interesting_thread'. interesting_thread->cpu will be 0. So, vfp_current_hw_state[0] points at interesting_thread->vfpstate. The hardware state will be saved, along with the CPU number (0) that it was executing on. 'thread' will be 'new_cpu0_thread' with new_cpu0_thread->cpu = 0. Also, because it was executing on CPU0, new_cpu0_thread->vfpstate.hard.cpu = 0, and so the thread migration check is not triggered. This means that vfp_current_hw_state[0] remains pointing at interesting_thread. The second execution will be on CPU1 to switch _to_ 'interesting_thread'. So, 'thread' will be 'interesting_thread' and interesting_thread->cpu now will be 1. The previous thread executing on CPU1 is not relevant to this so we shall ignore that. We get to the thread migration check. Here, we discover that interesting_thread->vfpstate.hard.cpu = 0, yet interesting_thread->cpu is now 1, indicating thread migration. We set vfp_current_hw_state[1] to NULL. So, at this point vfp_current_hw_state[] contains the following: [0] = &interesting_thread->vfpstate [1] = NULL Our interesting thread now executes a VFP instruction, takes a fault which loads the state into the VFP hardware. Now, through the assembly we now have: [0] = &interesting_thread->vfpstate [1] = &interesting_thread->vfpstate CPU1 stops due to ptrace (and so saves its VFP state) using the thread switch code above), and CPU0 calls vfp_sync_hwstate(). if (vfp_current_hw_state[cpu] == &thread->vfpstate) { vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN); BANG, we corrupt interesting_thread's VFP state by overwriting the more up-to-date state saved by CPU1 with the old VFP state from CPU0. Fix this by ensuring that we have sane semantics for the various state describing variables: 1. vfp_current_hw_state[] points to the current owner of the context information stored in each CPUs hardware, or NULL if that state information is invalid. 2. thread->vfpstate.hard.cpu always contains the most recent CPU number which the state was loaded into or NR_CPUS if no CPU owns the state. So, for a particular CPU to be a valid owner of the VFP state for a particular thread t, two things must be true: vfp_current_hw_state[cpu] == &t->vfpstate && t->vfpstate.hard.cpu == cpu. and that is valid from the moment a CPU loads the saved VFP context into the hardware. This gives clear and consistent semantics to interpreting these variables. This patch also fixes thread copying, ensuring that t->vfpstate.hard.cpu is invalidated, otherwise CPU0 may believe it was the last owner. The hole can happen thus: - thread1 runs on CPU2 using VFP, migrates to CPU3, exits and thread_info freed. - New thread allocated from a previously running thread on CPU2, reusing memory for thread1 and copying vfp.hard.cpu. At this point, the following are true: new_thread1->vfpstate.hard.cpu == 2 &new_thread1->vfpstate == vfp_current_hw_state[2] Lastly, this also addresses thread flushing in a similar way to thread copying. Hole is: - thread runs on CPU0, using VFP, migrates to CPU1 but does not use VFP. - thread calls execve(), so thread flush happens, leaving vfp_current_hw_state[0] intact. This vfpstate is memset to 0 causing thread->vfpstate.hard.cpu = 0. - thread migrates back to CPU0 before using VFP. At this point, the following are true: thread->vfpstate.hard.cpu == 0 &thread->vfpstate == vfp_current_hw_state[0] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-09 19:09:43 +04:00
#ifdef CONFIG_SMP
DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu));
#endif
ARM: Don't unconditionally bloat thread_info There is no point reserving space at the bottom of the kernel stack for per-thread crunch state, and per-thread VFP state if these are not being supported by the kernel being built. Remove these members from the thread union when these features are disabled. Reported-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-29 14:16:59 +04:00
#endif
ARMv7: Add support for the ThumbEE state saving/restoring This patch adds the detection and handling of the ThumbEE extension on ARMv7 CPUs. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-19 01:43:06 +04:00
#ifdef CONFIG_ARM_THUMBEE
DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state));
#endif
[ARM] iwmmxt thread state alignment This patch removes the reliance of iwmmxt on hand coded alignments. Since thread_info is always 8K aligned, specifying that fpstate is 8-byte aligned achieves the same effect without needing to resort to hand coded alignments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-13 01:36:06 +03:00
#ifdef CONFIG_IWMMXT
DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt));
[ARM] 3370/2: ep93xx: add crunch support Patch from Lennert Buytenhek Add the necessary kernel bits for crunch task switching. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-28 02:03:03 +04:00
#endif
#ifdef CONFIG_CRUNCH
DEFINE(TI_CRUNCH_STATE, offsetof(struct thread_info, crunchstate));
[ARM] iwmmxt thread state alignment This patch removes the reliance of iwmmxt on hand coded alignments. Since thread_info is always 8K aligned, specifying that fpstate is 8-byte aligned achieves the same effect without needing to resort to hand coded alignments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-13 01:36:06 +03:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
BLANK();
[PATCH] ARM: pt_regs offsets Generate pt_regs S_xx offsets from the structure itself instead of #defining them. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 18:18:59 +04:00
DEFINE(S_R0, offsetof(struct pt_regs, ARM_r0));
DEFINE(S_R1, offsetof(struct pt_regs, ARM_r1));
DEFINE(S_R2, offsetof(struct pt_regs, ARM_r2));
DEFINE(S_R3, offsetof(struct pt_regs, ARM_r3));
DEFINE(S_R4, offsetof(struct pt_regs, ARM_r4));
DEFINE(S_R5, offsetof(struct pt_regs, ARM_r5));
DEFINE(S_R6, offsetof(struct pt_regs, ARM_r6));
DEFINE(S_R7, offsetof(struct pt_regs, ARM_r7));
DEFINE(S_R8, offsetof(struct pt_regs, ARM_r8));
DEFINE(S_R9, offsetof(struct pt_regs, ARM_r9));
DEFINE(S_R10, offsetof(struct pt_regs, ARM_r10));
DEFINE(S_FP, offsetof(struct pt_regs, ARM_fp));
DEFINE(S_IP, offsetof(struct pt_regs, ARM_ip));
DEFINE(S_SP, offsetof(struct pt_regs, ARM_sp));
DEFINE(S_LR, offsetof(struct pt_regs, ARM_lr));
DEFINE(S_PC, offsetof(struct pt_regs, ARM_pc));
DEFINE(S_PSR, offsetof(struct pt_regs, ARM_cpsr));
DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0));
DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));
BLANK();
ARM: 7114/1: cache-l2x0: add resume entry for l2 in secure mode we save the l2x0 registers at the first initialization, and platform codes can get them to restore l2x0 status after wakeup. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-30 17:43:12 +04:00
#ifdef CONFIG_CACHE_L2X0
DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base));
DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl));
DEFINE(L2X0_R_TAG_LATENCY, offsetof(struct l2x0_regs, tag_latency));
DEFINE(L2X0_R_DATA_LATENCY, offsetof(struct l2x0_regs, data_latency));
DEFINE(L2X0_R_FILTER_START, offsetof(struct l2x0_regs, filter_start));
DEFINE(L2X0_R_FILTER_END, offsetof(struct l2x0_regs, filter_end));
DEFINE(L2X0_R_PREFETCH_CTRL, offsetof(struct l2x0_regs, prefetch_ctrl));
DEFINE(L2X0_R_PWR_CTRL, offsetof(struct l2x0_regs, pwr_ctrl));
BLANK();
#endif
[ARM] ARMv6: add CPU_HAS_ASID configuration Presently, we check for the minimum ARM architecture that we're building for to determine whether we need ASID support. This is wrong - if we're going to support a range of CPUs which include ARMv6 or higher, we need the ASID. Convert the checks to use a new configuration symbol, and arrange for ARMv6 and higher CPU entries to select it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17 13:19:23 +04:00
#ifdef CONFIG_CPU_HAS_ASID
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-28 20:47:36 +04:00
DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id.counter));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
BLANK();
#endif
DEFINE(VMA_VM_MM, offsetof(struct vm_area_struct, vm_mm));
DEFINE(VMA_VM_FLAGS, offsetof(struct vm_area_struct, vm_flags));
BLANK();
DEFINE(VM_EXEC, VM_EXEC);
BLANK();
DEFINE(PAGE_SZ, PAGE_SIZE);
BLANK();
DEFINE(SYS_ERROR0, 0x9f0000);
BLANK();
DEFINE(SIZEOF_MACHINE_DESC, sizeof(struct machine_desc));
[ARM] 3496/1: more constants for asm-offsets.h Patch from Uwe Zeisberger added the following constants: - MACHINFO_TYPE - MACHINFO_NAME - MACHINFO_PHYSIO - MACHINFO_PGOFFIO - PROCINFO_INITFUNC - PROCINFO_MMUFLAGS and removed their definition from head.S and head-nommu.S Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-05 18:11:14 +04:00
DEFINE(MACHINFO_TYPE, offsetof(struct machine_desc, nr));
DEFINE(MACHINFO_NAME, offsetof(struct machine_desc, name));
[ARM] 3517/1: move definition of PROC_INFO_SZ from procinfo.h to asm-offsets.h Patch from Uwe Zeisberger The symbol is only used in arch/arm/kernel/head-common.S. This in turn is included from arch/arm/kernel/head.S and arch/arm/kernel/head-nommu.S which include asm-offsets.h . Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-10 21:11:05 +04:00
BLANK();
DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list));
[ARM] 3496/1: more constants for asm-offsets.h Patch from Uwe Zeisberger added the following constants: - MACHINFO_TYPE - MACHINFO_NAME - MACHINFO_PHYSIO - MACHINFO_PGOFFIO - PROCINFO_INITFUNC - PROCINFO_MMUFLAGS and removed their definition from head.S and head-nommu.S Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-05 18:11:14 +04:00
DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush));
[ARM] Set bit 4 on section mappings correctly depending on CPU On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 21:24:21 +04:00
DEFINE(PROCINFO_MM_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
DEFINE(PROCINFO_IO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_io_mmu_flags));
Add a prefetch abort handler This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-19 01:43:07 +04:00
BLANK();
#ifdef MULTI_DABORT
DEFINE(PROCESSOR_DABT_FUNC, offsetof(struct processor, _data_abort));
#endif
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
ARM: pm: add generic CPU suspend/resume support This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Tested-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-06 18:48:39 +03:00
#endif
#ifdef MULTI_CPU
DEFINE(CPU_SLEEP_SIZE, offsetof(struct processor, suspend_size));
DEFINE(CPU_DO_SUSPEND, offsetof(struct processor, do_suspend));
DEFINE(CPU_DO_RESUME, offsetof(struct processor, do_resume));
#endif
#ifdef MULTI_CACHE
DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all));
ARM: kernel: implement stack pointer save array through MPIDR hashing Current implementation of cpu_{suspend}/cpu_{resume} relies on the MPIDR to index the array of pointers where the context is saved and restored. The current approach works as long as the MPIDR can be considered a linear index, so that the pointers array can simply be dereferenced by using the MPIDR[7:0] value. On ARM multi-cluster systems, where the MPIDR may not be a linear index, to properly dereference the stack pointer array, a mapping function should be applied to it so that it can be used for arrays look-ups. This patch adds code in the cpu_{suspend}/cpu_{resume} implementation that relies on shifting and ORing hashing method to map a MPIDR value to a set of buckets precomputed at boot to have a collision free mapping from MPIDR to context pointers. The hashing algorithm must be simple, fast, and implementable with few instructions since in the cpu_resume path the mapping is carried out with the MMU off and the I-cache off, hence code and data are fetched from DRAM with no-caching available. Simplicity is counterbalanced with a little increase of memory (allocated dynamically) for stack pointers buckets, that should be anyway fairly limited on most systems. Memory for context pointers is allocated in a early_initcall with size precomputed and stashed previously in kernel data structures. Memory for context pointers is allocated through kmalloc; this guarantees contiguous physical addresses for the allocated memory which is fundamental to the correct functioning of the resume mechanism that relies on the context pointer array to be a chunk of contiguous physical memory. Virtual to physical address conversion for the context pointer array base is carried out at boot to avoid fiddling with virt_to_phys conversions in the cpu_resume path which is quite fragile and should be optimized to execute as few instructions as possible. Virtual and physical context pointer base array addresses are stashed in a struct that is accessible from assembly using values generated through the asm-offsets.c mechanism. Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Colin Cross <ccross@android.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2013-05-16 13:34:30 +04:00
#endif
#ifdef CONFIG_ARM_CPU_SUSPEND
DEFINE(SLEEP_SAVE_SP_SZ, sizeof(struct sleep_save_sp));
DEFINE(SLEEP_SAVE_SP_PHYS, offsetof(struct sleep_save_sp, save_ptr_stash_phys));
DEFINE(SLEEP_SAVE_SP_VIRT, offsetof(struct sleep_save_sp, save_ptr_stash));
Add a prefetch abort handler This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-04-19 01:43:07 +04:00
#endif
ARM: dma-mapping: provide per-cpu type map/unmap functions Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2009-11-26 19:19:58 +03:00
BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
ARM: mcpm: introduce helpers for platform coherency exit/setup This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-17 17:25:42 +04:00
BLANK();
ARM: mcpm_head.S: vlock-based first man election Instead of requiring the first man to be elected in advance (which can be suboptimal in some situations), this patch uses a per- cluster mutex to co-ordinate selection of the first man. This should also make it more feasible to reuse this code path for asynchronous cluster resume (as in CPUidle scenarios). We must ensure that the vlock data doesn't share a cacheline with anything else, or dirty cache eviction could corrupt it. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-08-17 19:07:02 +04:00
DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER);
ARM: mcpm: introduce helpers for platform coherency exit/setup This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-17 17:25:42 +04:00
DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE);
BLANK();
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:47:42 +04:00
#ifdef CONFIG_KVM_ARM_HOST
ARM: KVM: Move VFP registers to a CPU context structure In order to turn the WS code into something that looks a bit more like the arm64 version, move the VFP registers into a CPU context container for both the host and the guest. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-03 14:01:49 +03:00
DEFINE(VCPU_GUEST_CTXT, offsetof(struct kvm_vcpu, arch.ctxt));
DEFINE(VCPU_HOST_CTXT, offsetof(struct kvm_vcpu, arch.host_cpu_context));
DEFINE(CPU_CTXT_VFP, offsetof(struct kvm_cpu_context, vfp));
ARM: KVM: Move GP registers into the CPU context structure Continuing our rework of the CPU context, we now move the GP registers into the CPU context structure. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-03 14:26:01 +03:00
DEFINE(CPU_CTXT_GP_REGS, offsetof(struct kvm_cpu_context, gp_regs));
DEFINE(GP_REGS_USR, offsetof(struct kvm_regs, usr_regs));
ARM: 8330/1: add VDSO user-space code Place VDSO-related user-space code in arch/arm/kernel/vdso/. It is almost completely written in C with some assembly helpers to load the data page address, sample the counter, and fall back to system calls when necessary. The VDSO can service gettimeofday and clock_gettime when CONFIG_ARM_ARCH_TIMER is enabled and the architected timer is present (and correctly configured). It reads the CP15-based virtual counter to compute high-resolution timestamps. Of particular note is that a post-processing step ("vdsomunge") is necessary to produce a shared object which is architecturally allowed to be used by both soft- and hard-float EABI programs. The 2012 edition of the ARM ABI defines Tag_ABI_VFP_args = 3 "Code is compatible with both the base and VFP variants; the user did not permit non-variadic functions to pass FP parameters/results." Unfortunately current toolchains do not support this tag, which is ideally what we would use. The best available option is to ensure that both EF_ARM_ABI_FLOAT_SOFT and EF_ARM_ABI_FLOAT_HARD are unset in the ELF header's e_flags, indicating that the shared object is "old" and should be accepted for backward compatibility's sake. While binutils < 2.24 appear to produce a vdso.so with both flags clear, 2.24 always sets EF_ARM_ABI_FLOAT_SOFT, with no way to inhibit this behavior. So we have to fix things up with a custom post-processing step. In fact, the VDSO code in glibc does much less validation (including checking these flags) than the code for handling conventional file-backed shared libraries, so this is a bit moot unless glibc's VDSO code becomes more strict. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-25 21:14:22 +03:00
#endif
BLANK();
#ifdef CONFIG_VDSO
DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store));
KVM: ARM: World-switch implementation Provides complete world-switch implementation to switch to other guests running in non-secure modes. Includes Hyp exception handlers that capture necessary exception information and stores the information on the VCPU and KVM structures. The following Hyp-ABI is also documented in the code: Hyp-ABI: Calling HYP-mode functions from host (in SVC mode): Switching to Hyp mode is done through a simple HVC #0 instruction. The exception vector code will check that the HVC comes from VMID==0 and if so will push the necessary state (SPSR, lr_usr) on the Hyp stack. - r0 contains a pointer to a HYP function - r1, r2, and r3 contain arguments to the above function. - The HYP function will be called with its arguments in r0, r1 and r2. On HYP function return, we return directly to SVC. A call to a function executing in Hyp mode is performed like the following: <svc code> ldr r0, =BSYM(my_hyp_fn) ldr r1, =my_param hvc #0 ; Call my_hyp_fn(my_param) from HYP mode <svc code> Otherwise, the world-switch is pretty straight-forward. All state that can be modified by the guest is first backed up on the Hyp stack and the VCPU values is loaded onto the hardware. State, which is not loaded, but theoretically modifiable by the guest is protected through the virtualiation features to generate a trap and cause software emulation. Upon guest returns, all state is restored from hardware onto the VCPU struct and the original state is restored from the Hyp-stack onto the hardware. SMP support using the VMPIDR calculated on the basis of the host MPIDR and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier. Reuse of VMIDs has been implemented by Antonios Motakis and adapated from a separate patch into the appropriate patches introducing the functionality. Note that the VMIDs are stored per VM as required by the ARM architecture reference manual. To support VFP/NEON we trap those instructions using the HPCTR. When we trap, we switch the FPU. After a guest exit, the VFP state is returned to the host. When disabling access to floating point instructions, we also mask FPEXC_EN in order to avoid the guest receiving Undefined instruction exceptions before we have a chance to switch back the floating point state. We are reusing vfp_hard_struct, so we depend on VFPv3 being enabled in the host kernel, if not, we still trap cp10 and cp11 in order to inject an undefined instruction exception whenever the guest tries to use VFP/NEON. VFP/NEON developed by Antionios Motakis and Rusty Russell. Aborts that are permission faults, and not stage-1 page table walk, do not report the faulting address in the HPFAR. We have to resolve the IPA, and store it just like the HPFAR register on the VCPU struct. If the IPA cannot be resolved, it means another CPU is playing with the page tables, and we simply restart the guest. This quirk was fixed by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:47:42 +04:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return 0;
}