WSL2-Linux-Kernel/fs/afs/cell.c

966 строки
24 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
/* AFS cell and server record management
*
* Copyright (C) 2002, 2017 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*/
#include <linux/slab.h>
#include <linux/key.h>
#include <linux/ctype.h>
#include <linux/dns_resolver.h>
#include <linux/sched.h>
#include <linux/inet.h>
#include <linux/namei.h>
#include <keys/rxrpc-type.h>
#include "internal.h"
afs: Fix checker warnings Fix warnings raised by checker, including: (*) Warnings raised by unequal comparison for the purposes of sorting, where the endianness doesn't matter: fs/afs/addr_list.c:246:21: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:246:30: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:248:21: warning: restricted __be32 degrades to integer fs/afs/addr_list.c:248:49: warning: restricted __be32 degrades to integer fs/afs/addr_list.c:283:21: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:283:30: warning: restricted __be16 degrades to integer (*) afs_set_cb_interest() is not actually used and can be removed. (*) afs_cell_gc_delay() should be provided with a sysctl. (*) afs_cell_destroy() needs to use rcu_access_pointer() to read cell->vl_addrs. (*) afs_init_fs_cursor() should be static. (*) struct afs_vnode::permit_cache needs to be marked __rcu. (*) afs_server_rcu() needs to use rcu_access_pointer(). (*) afs_destroy_server() should use rcu_access_pointer() on server->addresses as the server object is no longer accessible. (*) afs_find_server() casts __be16/__be32 values to int in order to directly compare them for the purpose of finding a match in a list, but is should also annotate the cast with __force to avoid checker warnings. (*) afs_check_permit() accesses vnode->permit_cache outside of the RCU readlock, though it doesn't then access the value; the extraneous access is deleted. False positives: (*) Conditional locking around the code in xdr_decode_AFSFetchStatus. This can be dealt with in a separate patch. fs/afs/fsclient.c:148:9: warning: context imbalance in 'xdr_decode_AFSFetchStatus' - different lock contexts for basic block (*) Incorrect handling of seq-retry lock context balance: fs/afs/inode.c:455:38: warning: context imbalance in 'afs_getattr' - different lock contexts for basic block fs/afs/server.c:52:17: warning: context imbalance in 'afs_find_server' - different lock contexts for basic block fs/afs/server.c:128:17: warning: context imbalance in 'afs_find_server_by_uuid' - different lock contexts for basic block Errors: (*) afs_lookup_cell_rcu() needs to break out of the seq-retry loop, not go round again if it successfully found the workstation cell. (*) Fix UUID decode in afs_deliver_cb_probe_uuid(). (*) afs_cache_permit() has a missing rcu_read_unlock() before one of the jumps to the someone_else_changed_it label. Move the unlock to after the label. (*) afs_vl_get_addrs_u() is using ntohl() rather than htonl() when encoding to XDR. (*) afs_deliver_yfsvl_get_endpoints() is using htonl() rather than ntohl() when decoding from XDR. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09 23:12:31 +03:00
static unsigned __read_mostly afs_cell_gc_delay = 10;
static unsigned __read_mostly afs_cell_min_ttl = 10 * 60;
static unsigned __read_mostly afs_cell_max_ttl = 24 * 60 * 60;
static atomic_t cell_debug_id;
static void afs_queue_cell_manager(struct afs_net *);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
static void afs_manage_cell_work(struct work_struct *);
static void afs_dec_cells_outstanding(struct afs_net *net)
{
if (atomic_dec_and_test(&net->cells_outstanding))
wake_up_var(&net->cells_outstanding);
}
/*
* Set the cell timer to fire after a given delay, assuming it's not already
* set for an earlier time.
*/
static void afs_set_cell_timer(struct afs_net *net, time64_t delay)
{
if (net->live) {
atomic_inc(&net->cells_outstanding);
if (timer_reduce(&net->cells_timer, jiffies + delay * HZ))
afs_dec_cells_outstanding(net);
} else {
afs_queue_cell_manager(net);
}
}
/*
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
* Look up and get an activation reference on a cell record. The caller must
* hold net->cells_lock at least read-locked.
*/
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
static struct afs_cell *afs_find_cell_locked(struct afs_net *net,
const char *name, unsigned int namesz,
enum afs_cell_trace reason)
{
struct afs_cell *cell = NULL;
struct rb_node *p;
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
int n;
_enter("%*.*s", namesz, namesz, name);
if (name && namesz == 0)
return ERR_PTR(-EINVAL);
if (namesz > AFS_MAXCELLNAME)
return ERR_PTR(-ENAMETOOLONG);
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
if (!name) {
cell = net->ws_cell;
if (!cell)
return ERR_PTR(-EDESTADDRREQ);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
goto found;
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
}
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
p = net->cells.rb_node;
while (p) {
cell = rb_entry(p, struct afs_cell, net_node);
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
n = strncasecmp(cell->name, name,
min_t(size_t, cell->name_len, namesz));
if (n == 0)
n = cell->name_len - namesz;
if (n < 0)
p = p->rb_left;
else if (n > 0)
p = p->rb_right;
else
goto found;
}
return ERR_PTR(-ENOENT);
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
found:
return afs_use_cell(cell, reason);
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
}
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
/*
* Look up and get an activation reference on a cell record.
*/
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
struct afs_cell *afs_find_cell(struct afs_net *net,
const char *name, unsigned int namesz,
enum afs_cell_trace reason)
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
{
struct afs_cell *cell;
down_read(&net->cells_lock);
cell = afs_find_cell_locked(net, name, namesz, reason);
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
up_read(&net->cells_lock);
return cell;
}
/*
* Set up a cell record and fill in its name, VL server address list and
* allocate an anonymous key
*/
static struct afs_cell *afs_alloc_cell(struct afs_net *net,
const char *name, unsigned int namelen,
const char *addresses)
{
struct afs_vlserver_list *vllist;
struct afs_cell *cell;
int i, ret;
ASSERT(name);
if (namelen == 0)
return ERR_PTR(-EINVAL);
if (namelen > AFS_MAXCELLNAME) {
_leave(" = -ENAMETOOLONG");
return ERR_PTR(-ENAMETOOLONG);
}
/* Prohibit cell names that contain unprintable chars, '/' and '@' or
* that begin with a dot. This also precludes "@cell".
*/
if (name[0] == '.')
return ERR_PTR(-EINVAL);
for (i = 0; i < namelen; i++) {
char ch = name[i];
if (!isprint(ch) || ch == '/' || ch == '@')
return ERR_PTR(-EINVAL);
}
_enter("%*.*s,%s", namelen, namelen, name, addresses);
cell = kzalloc(sizeof(struct afs_cell), GFP_KERNEL);
if (!cell) {
_leave(" = -ENOMEM");
return ERR_PTR(-ENOMEM);
}
cell->name = kmalloc(namelen + 1, GFP_KERNEL);
if (!cell->name) {
kfree(cell);
return ERR_PTR(-ENOMEM);
}
afs: Lay the groundwork for supporting network namespaces Lay the groundwork for supporting network namespaces (netns) to the AFS filesystem by moving various global features to a network-namespace struct (afs_net) and providing an instance of this as a temporary global variable that everything uses via accessor functions for the moment. The following changes have been made: (1) Store the netns in the superblock info. This will be obtained from the mounter's nsproxy on a manual mount and inherited from the parent superblock on an automount. (2) The cell list is made per-netns. It can be viewed through /proc/net/afs/cells and also be modified by writing commands to that file. (3) The local workstation cell is set per-ns in /proc/net/afs/rootcell. This is unset by default. (4) The 'rootcell' module parameter, which sets a cell and VL server list modifies the init net namespace, thereby allowing an AFS root fs to be theoretically used. (5) The volume location lists and the file lock manager are made per-netns. (6) The AF_RXRPC socket and associated I/O bits are made per-ns. The various workqueues remain global for the moment. Changes still to be made: (1) /proc/fs/afs/ should be moved to /proc/net/afs/ and a symlink emplaced from the old name. (2) A per-netns subsys needs to be registered for AFS into which it can store its per-netns data. (3) Rather than the AF_RXRPC socket being opened on module init, it needs to be opened on the creation of a superblock in that netns. (4) The socket needs to be closed when the last superblock using it is destroyed and all outstanding client calls on it have been completed. This prevents a reference loop on the namespace. (5) It is possible that several namespaces will want to use AFS, in which case each one will need its own UDP port. These can either be set through /proc/net/afs/cm_port or the kernel can pick one at random. The init_ns gets 7001 by default. Other issues that need resolving: (1) The DNS keyring needs net-namespacing. (2) Where do upcalls go (eg. DNS request-key upcall)? (3) Need something like open_socket_in_file_ns() syscall so that AFS command line tools attempting to operate on an AFS file/volume have their RPC calls go to the right place. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:45 +03:00
cell->net = net;
cell->name_len = namelen;
for (i = 0; i < namelen; i++)
cell->name[i] = tolower(name[i]);
cell->name[i] = 0;
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
atomic_set(&cell->ref, 1);
atomic_set(&cell->active, 0);
INIT_WORK(&cell->manager, afs_manage_cell_work);
cell->volumes = RB_ROOT;
INIT_HLIST_HEAD(&cell->proc_volumes);
seqlock_init(&cell->volume_lock);
cell->fs_servers = RB_ROOT;
seqlock_init(&cell->fs_lock);
rwlock_init(&cell->vl_servers_lock);
afs: Detect cell aliases 1 - Cells with root volumes Put in the first phase of cell alias detection. This part handles alias detection for cells that have root.cell volumes (which is expected to be likely). When a cell becomes newly active, it is probed for its root.cell volume, and if it has one, this volume is compared against other root.cell volumes to find out if the list of fileserver UUIDs have any in common - and if that's the case, do the address lists of those fileservers have any addresses in common. If they do, the new cell is adjudged to be an alias of the old cell and the old cell is used instead. Comparing is aided by the server list in struct afs_server_list being sorted in UUID order and the addresses in the fileserver address lists being sorted in address order. The cell then retains the afs_volume object for the root.cell volume, even if it's not mounted for future alias checking. This necessary because: (1) Whilst fileservers have UUIDs that are meant to be globally unique, in practice they are not because cells get cloned without changing the UUIDs - so afs_server records need to be per cell. (2) Sometimes the DNS is used to make cell aliases - but if we don't know they're the same, we may end up with multiple superblocks and multiple afs_server records for the same thing, impairing our ability to deliver callback notifications of third party changes (3) The fileserver RPC API doesn't contain the cell name, so it can't tell us which cell it's notifying and can't see that a change made to to one cell should notify the same client that's also accessed as the other cell. Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-25 12:26:02 +03:00
cell->flags = (1 << AFS_CELL_FL_CHECK_ALIAS);
/* Provide a VL server list, filling it in if we were given a list of
* addresses to use.
*/
if (addresses) {
vllist = afs_parse_text_addrs(net,
addresses, strlen(addresses), ':',
VL_SERVICE, AFS_VL_PORT);
if (IS_ERR(vllist)) {
ret = PTR_ERR(vllist);
goto parse_failed;
}
vllist->source = DNS_RECORD_FROM_CONFIG;
vllist->status = DNS_LOOKUP_NOT_DONE;
cell->dns_expiry = TIME64_MAX;
} else {
ret = -ENOMEM;
vllist = afs_alloc_vlserver_list(0);
if (!vllist)
goto error;
vllist->source = DNS_RECORD_UNAVAILABLE;
vllist->status = DNS_LOOKUP_NOT_DONE;
cell->dns_expiry = ktime_get_real_seconds();
}
rcu_assign_pointer(cell->vl_servers, vllist);
cell->dns_source = vllist->source;
cell->dns_status = vllist->status;
smp_store_release(&cell->dns_lookup_count, 1); /* vs source/status */
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
atomic_inc(&net->cells_outstanding);
cell->debug_id = atomic_inc_return(&cell_debug_id);
trace_afs_cell(cell->debug_id, 1, 0, afs_cell_trace_alloc);
_leave(" = %p", cell);
return cell;
parse_failed:
if (ret == -EINVAL)
printk(KERN_ERR "kAFS: bad VL server IP address\n");
error:
kfree(cell->name);
kfree(cell);
_leave(" = %d", ret);
return ERR_PTR(ret);
}
/*
* afs_lookup_cell - Look up or create a cell record.
afs: Lay the groundwork for supporting network namespaces Lay the groundwork for supporting network namespaces (netns) to the AFS filesystem by moving various global features to a network-namespace struct (afs_net) and providing an instance of this as a temporary global variable that everything uses via accessor functions for the moment. The following changes have been made: (1) Store the netns in the superblock info. This will be obtained from the mounter's nsproxy on a manual mount and inherited from the parent superblock on an automount. (2) The cell list is made per-netns. It can be viewed through /proc/net/afs/cells and also be modified by writing commands to that file. (3) The local workstation cell is set per-ns in /proc/net/afs/rootcell. This is unset by default. (4) The 'rootcell' module parameter, which sets a cell and VL server list modifies the init net namespace, thereby allowing an AFS root fs to be theoretically used. (5) The volume location lists and the file lock manager are made per-netns. (6) The AF_RXRPC socket and associated I/O bits are made per-ns. The various workqueues remain global for the moment. Changes still to be made: (1) /proc/fs/afs/ should be moved to /proc/net/afs/ and a symlink emplaced from the old name. (2) A per-netns subsys needs to be registered for AFS into which it can store its per-netns data. (3) Rather than the AF_RXRPC socket being opened on module init, it needs to be opened on the creation of a superblock in that netns. (4) The socket needs to be closed when the last superblock using it is destroyed and all outstanding client calls on it have been completed. This prevents a reference loop on the namespace. (5) It is possible that several namespaces will want to use AFS, in which case each one will need its own UDP port. These can either be set through /proc/net/afs/cm_port or the kernel can pick one at random. The init_ns gets 7001 by default. Other issues that need resolving: (1) The DNS keyring needs net-namespacing. (2) Where do upcalls go (eg. DNS request-key upcall)? (3) Need something like open_socket_in_file_ns() syscall so that AFS command line tools attempting to operate on an AFS file/volume have their RPC calls go to the right place. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:45 +03:00
* @net: The network namespace
* @name: The name of the cell.
* @namesz: The strlen of the cell name.
* @vllist: A colon/comma separated list of numeric IP addresses or NULL.
* @excl: T if an error should be given if the cell name already exists.
*
* Look up a cell record by name and query the DNS for VL server addresses if
* needed. Note that that actual DNS query is punted off to the manager thread
* so that this function can return immediately if interrupted whilst allowing
* cell records to be shared even if not yet fully constructed.
*/
struct afs_cell *afs_lookup_cell(struct afs_net *net,
const char *name, unsigned int namesz,
const char *vllist, bool excl)
{
struct afs_cell *cell, *candidate, *cursor;
struct rb_node *parent, **pp;
enum afs_cell_state state;
int ret, n;
_enter("%s,%s", name, vllist);
if (!excl) {
cell = afs_find_cell(net, name, namesz, afs_cell_trace_use_lookup);
if (!IS_ERR(cell))
goto wait_for_cell;
}
/* Assume we're probably going to create a cell and preallocate and
* mostly set up a candidate record. We can then use this to stash the
* name, the net namespace and VL server addresses.
*
* We also want to do this before we hold any locks as it may involve
* upcalling to userspace to make DNS queries.
*/
candidate = afs_alloc_cell(net, name, namesz, vllist);
if (IS_ERR(candidate)) {
_leave(" = %ld", PTR_ERR(candidate));
return candidate;
}
/* Find the insertion point and check to see if someone else added a
* cell whilst we were allocating.
*/
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
down_write(&net->cells_lock);
pp = &net->cells.rb_node;
parent = NULL;
while (*pp) {
parent = *pp;
cursor = rb_entry(parent, struct afs_cell, net_node);
n = strncasecmp(cursor->name, name,
min_t(size_t, cursor->name_len, namesz));
if (n == 0)
n = cursor->name_len - namesz;
if (n < 0)
pp = &(*pp)->rb_left;
else if (n > 0)
pp = &(*pp)->rb_right;
else
goto cell_already_exists;
}
cell = candidate;
candidate = NULL;
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
atomic_set(&cell->active, 2);
trace_afs_cell(cell->debug_id, atomic_read(&cell->ref), 2, afs_cell_trace_insert);
rb_link_node_rcu(&cell->net_node, parent, pp);
rb_insert_color(&cell->net_node, &net->cells);
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
up_write(&net->cells_lock);
afs_queue_cell(cell, afs_cell_trace_get_queue_new);
wait_for_cell:
trace_afs_cell(cell->debug_id, atomic_read(&cell->ref), atomic_read(&cell->active),
afs_cell_trace_wait);
_debug("wait_for_cell");
wait_var_event(&cell->state,
({
state = smp_load_acquire(&cell->state); /* vs error */
state == AFS_CELL_ACTIVE || state == AFS_CELL_REMOVED;
}));
/* Check the state obtained from the wait check. */
if (state == AFS_CELL_REMOVED) {
ret = cell->error;
goto error;
}
_leave(" = %p [cell]", cell);
return cell;
cell_already_exists:
_debug("cell exists");
cell = cursor;
if (excl) {
ret = -EEXIST;
} else {
afs_use_cell(cursor, afs_cell_trace_use_lookup);
ret = 0;
}
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
up_write(&net->cells_lock);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
if (candidate)
afs_put_cell(candidate, afs_cell_trace_put_candidate);
if (ret == 0)
goto wait_for_cell;
goto error_noput;
error:
afs_unuse_cell(net, cell, afs_cell_trace_unuse_lookup);
error_noput:
_leave(" = %d [error]", ret);
return ERR_PTR(ret);
}
/*
* set the root cell information
* - can be called with a module parameter string
* - can be called from a write to /proc/fs/afs/rootcell
*/
int afs_cell_init(struct afs_net *net, const char *rootcell)
{
struct afs_cell *old_root, *new_root;
const char *cp, *vllist;
size_t len;
_enter("");
if (!rootcell) {
/* module is loaded with no parameters, or built statically.
* - in the future we might initialize cell DB here.
*/
_leave(" = 0 [no root]");
return 0;
}
cp = strchr(rootcell, ':');
if (!cp) {
_debug("kAFS: no VL server IP addresses specified");
vllist = NULL;
len = strlen(rootcell);
} else {
vllist = cp + 1;
len = cp - rootcell;
}
/* allocate a cell record for the root cell */
new_root = afs_lookup_cell(net, rootcell, len, vllist, false);
if (IS_ERR(new_root)) {
_leave(" = %ld", PTR_ERR(new_root));
return PTR_ERR(new_root);
}
if (!test_and_set_bit(AFS_CELL_FL_NO_GC, &new_root->flags))
afs_use_cell(new_root, afs_cell_trace_use_pin);
/* install the new cell */
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
down_write(&net->cells_lock);
afs_see_cell(new_root, afs_cell_trace_see_ws);
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
old_root = net->ws_cell;
net->ws_cell = new_root;
up_write(&net->cells_lock);
afs_unuse_cell(net, old_root, afs_cell_trace_unuse_ws);
_leave(" = 0");
return 0;
}
/*
* Update a cell's VL server address list from the DNS.
*/
static int afs_update_cell(struct afs_cell *cell)
{
struct afs_vlserver_list *vllist, *old = NULL, *p;
unsigned int min_ttl = READ_ONCE(afs_cell_min_ttl);
unsigned int max_ttl = READ_ONCE(afs_cell_max_ttl);
time64_t now, expiry = 0;
int ret = 0;
_enter("%s", cell->name);
vllist = afs_dns_query(cell, &expiry);
if (IS_ERR(vllist)) {
ret = PTR_ERR(vllist);
_debug("%s: fail %d", cell->name, ret);
if (ret == -ENOMEM)
goto out_wake;
ret = -ENOMEM;
vllist = afs_alloc_vlserver_list(0);
if (!vllist)
goto out_wake;
switch (ret) {
case -ENODATA:
case -EDESTADDRREQ:
vllist->status = DNS_LOOKUP_GOT_NOT_FOUND;
break;
case -EAGAIN:
case -ECONNREFUSED:
vllist->status = DNS_LOOKUP_GOT_TEMP_FAILURE;
break;
default:
vllist->status = DNS_LOOKUP_GOT_LOCAL_FAILURE;
break;
}
}
_debug("%s: got list %d %d", cell->name, vllist->source, vllist->status);
cell->dns_status = vllist->status;
now = ktime_get_real_seconds();
if (min_ttl > max_ttl)
max_ttl = min_ttl;
if (expiry < now + min_ttl)
expiry = now + min_ttl;
else if (expiry > now + max_ttl)
expiry = now + max_ttl;
_debug("%s: status %d", cell->name, vllist->status);
if (vllist->source == DNS_RECORD_UNAVAILABLE) {
switch (vllist->status) {
case DNS_LOOKUP_GOT_NOT_FOUND:
/* The DNS said that the cell does not exist or there
* weren't any addresses to be had.
*/
cell->dns_expiry = expiry;
break;
case DNS_LOOKUP_BAD:
case DNS_LOOKUP_GOT_LOCAL_FAILURE:
case DNS_LOOKUP_GOT_TEMP_FAILURE:
case DNS_LOOKUP_GOT_NS_FAILURE:
default:
cell->dns_expiry = now + 10;
break;
}
} else {
cell->dns_expiry = expiry;
}
/* Replace the VL server list if the new record has servers or the old
* record doesn't.
*/
write_lock(&cell->vl_servers_lock);
p = rcu_dereference_protected(cell->vl_servers, true);
if (vllist->nr_servers > 0 || p->nr_servers == 0) {
rcu_assign_pointer(cell->vl_servers, vllist);
cell->dns_source = vllist->source;
old = p;
}
write_unlock(&cell->vl_servers_lock);
afs_put_vlserverlist(cell->net, old);
out_wake:
smp_store_release(&cell->dns_lookup_count,
cell->dns_lookup_count + 1); /* vs source/status */
wake_up_var(&cell->dns_lookup_count);
_leave(" = %d", ret);
return ret;
}
/*
* Destroy a cell record
*/
static void afs_cell_destroy(struct rcu_head *rcu)
{
struct afs_cell *cell = container_of(rcu, struct afs_cell, rcu);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
struct afs_net *net = cell->net;
int u;
_enter("%p{%s}", cell, cell->name);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
u = atomic_read(&cell->ref);
ASSERTCMP(u, ==, 0);
trace_afs_cell(cell->debug_id, u, atomic_read(&cell->active), afs_cell_trace_free);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
afs_put_vlserverlist(net, rcu_access_pointer(cell->vl_servers));
afs_unuse_cell(net, cell->alias_of, afs_cell_trace_unuse_alias);
key_put(cell->anonymous_key);
kfree(cell->name);
kfree(cell);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
afs_dec_cells_outstanding(net);
_leave(" [destroyed]");
}
/*
* Queue the cell manager.
*/
static void afs_queue_cell_manager(struct afs_net *net)
{
int outstanding = atomic_inc_return(&net->cells_outstanding);
_enter("%d", outstanding);
if (!queue_work(afs_wq, &net->cells_manager))
afs_dec_cells_outstanding(net);
}
/*
* Cell management timer. We have an increment on cells_outstanding that we
* need to pass along to the work item.
*/
void afs_cells_timer(struct timer_list *timer)
{
struct afs_net *net = container_of(timer, struct afs_net, cells_timer);
_enter("");
if (!queue_work(afs_wq, &net->cells_manager))
afs_dec_cells_outstanding(net);
}
/*
* Get a reference on a cell record.
*/
struct afs_cell *afs_get_cell(struct afs_cell *cell, enum afs_cell_trace reason)
{
int u;
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
if (atomic_read(&cell->ref) <= 0)
BUG();
u = atomic_inc_return(&cell->ref);
trace_afs_cell(cell->debug_id, u, atomic_read(&cell->active), reason);
return cell;
}
/*
* Drop a reference on a cell record.
*/
void afs_put_cell(struct afs_cell *cell, enum afs_cell_trace reason)
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
{
if (cell) {
unsigned int debug_id = cell->debug_id;
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
unsigned int u, a;
a = atomic_read(&cell->active);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
u = atomic_dec_return(&cell->ref);
trace_afs_cell(debug_id, u, a, reason);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
if (u == 0) {
a = atomic_read(&cell->active);
WARN(a != 0, "Cell active count %u > 0\n", a);
call_rcu(&cell->rcu, afs_cell_destroy);
}
}
}
/*
* Note a cell becoming more active.
*/
struct afs_cell *afs_use_cell(struct afs_cell *cell, enum afs_cell_trace reason)
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
{
int u, a;
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
if (atomic_read(&cell->ref) <= 0)
BUG();
u = atomic_read(&cell->ref);
a = atomic_inc_return(&cell->active);
trace_afs_cell(cell->debug_id, u, a, reason);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
return cell;
}
/*
* Record a cell becoming less active. When the active counter reaches 1, it
* is scheduled for destruction, but may get reactivated.
*/
void afs_unuse_cell(struct afs_net *net, struct afs_cell *cell, enum afs_cell_trace reason)
{
unsigned int debug_id;
time64_t now, expire_delay;
int u, a;
if (!cell)
return;
_enter("%s", cell->name);
now = ktime_get_real_seconds();
cell->last_inactive = now;
expire_delay = 0;
if (cell->vl_servers->nr_servers)
expire_delay = afs_cell_gc_delay;
debug_id = cell->debug_id;
u = atomic_read(&cell->ref);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
a = atomic_dec_return(&cell->active);
trace_afs_cell(debug_id, u, a, reason);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
WARN_ON(a == 0);
if (a == 1)
/* 'cell' may now be garbage collected. */
afs_set_cell_timer(net, expire_delay);
}
/*
* Note that a cell has been seen.
*/
void afs_see_cell(struct afs_cell *cell, enum afs_cell_trace reason)
{
int u, a;
u = atomic_read(&cell->ref);
a = atomic_read(&cell->active);
trace_afs_cell(cell->debug_id, u, a, reason);
}
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
/*
* Queue a cell for management, giving the workqueue a ref to hold.
*/
void afs_queue_cell(struct afs_cell *cell, enum afs_cell_trace reason)
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
{
afs_get_cell(cell, reason);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
if (!queue_work(afs_wq, &cell->manager))
afs_put_cell(cell, afs_cell_trace_put_queue_fail);
}
/*
* Allocate a key to use as a placeholder for anonymous user security.
*/
static int afs_alloc_anon_key(struct afs_cell *cell)
{
struct key *key;
char keyname[4 + AFS_MAXCELLNAME + 1], *cp, *dp;
/* Create a key to represent an anonymous user. */
memcpy(keyname, "afs@", 4);
dp = keyname + 4;
cp = cell->name;
do {
*dp++ = tolower(*cp);
} while (*cp++);
key = rxrpc_get_null_key(keyname);
if (IS_ERR(key))
return PTR_ERR(key);
cell->anonymous_key = key;
_debug("anon key %p{%x}",
cell->anonymous_key, key_serial(cell->anonymous_key));
return 0;
}
/*
* Activate a cell.
*/
static int afs_activate_cell(struct afs_net *net, struct afs_cell *cell)
{
struct hlist_node **p;
struct afs_cell *pcell;
int ret;
if (!cell->anonymous_key) {
ret = afs_alloc_anon_key(cell);
if (ret < 0)
return ret;
}
#ifdef CONFIG_AFS_FSCACHE
cell->cache = fscache_acquire_cookie(afs_cache_netfs.primary_index,
&afs_cell_cache_index_def,
cell->name, strlen(cell->name),
NULL, 0,
cell, 0, true);
#endif
ret = afs_proc_cell_setup(cell);
if (ret < 0)
return ret;
mutex_lock(&net->proc_cells_lock);
for (p = &net->proc_cells.first; *p; p = &(*p)->next) {
pcell = hlist_entry(*p, struct afs_cell, proc_link);
if (strcmp(cell->name, pcell->name) < 0)
break;
}
cell->proc_link.pprev = p;
cell->proc_link.next = *p;
rcu_assign_pointer(*p, &cell->proc_link.next);
if (cell->proc_link.next)
cell->proc_link.next->pprev = &cell->proc_link.next;
afs_dynroot_mkdir(net, cell);
mutex_unlock(&net->proc_cells_lock);
return 0;
}
/*
* Deactivate a cell.
*/
static void afs_deactivate_cell(struct afs_net *net, struct afs_cell *cell)
{
_enter("%s", cell->name);
afs_proc_cell_remove(cell);
mutex_lock(&net->proc_cells_lock);
hlist_del_rcu(&cell->proc_link);
afs_dynroot_rmdir(net, cell);
mutex_unlock(&net->proc_cells_lock);
#ifdef CONFIG_AFS_FSCACHE
fscache_relinquish_cookie(cell->cache, NULL, false);
cell->cache = NULL;
#endif
_leave("");
}
/*
* Manage a cell record, initialising and destroying it, maintaining its DNS
* records.
*/
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
static void afs_manage_cell(struct afs_cell *cell)
{
struct afs_net *net = cell->net;
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
int ret, active;
_enter("%s", cell->name);
again:
_debug("state %u", cell->state);
switch (cell->state) {
case AFS_CELL_INACTIVE:
case AFS_CELL_FAILED:
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
down_write(&net->cells_lock);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
active = 1;
if (atomic_try_cmpxchg_relaxed(&cell->active, &active, 0)) {
rb_erase(&cell->net_node, &net->cells);
trace_afs_cell(cell->debug_id, atomic_read(&cell->ref), 0,
afs_cell_trace_unuse_delete);
smp_store_release(&cell->state, AFS_CELL_REMOVED);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
}
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
up_write(&net->cells_lock);
if (cell->state == AFS_CELL_REMOVED) {
wake_up_var(&cell->state);
goto final_destruction;
}
if (cell->state == AFS_CELL_FAILED)
goto done;
smp_store_release(&cell->state, AFS_CELL_UNSET);
wake_up_var(&cell->state);
goto again;
case AFS_CELL_UNSET:
smp_store_release(&cell->state, AFS_CELL_ACTIVATING);
wake_up_var(&cell->state);
goto again;
case AFS_CELL_ACTIVATING:
ret = afs_activate_cell(net, cell);
if (ret < 0)
goto activation_failed;
smp_store_release(&cell->state, AFS_CELL_ACTIVE);
wake_up_var(&cell->state);
goto again;
case AFS_CELL_ACTIVE:
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
if (atomic_read(&cell->active) > 1) {
if (test_and_clear_bit(AFS_CELL_FL_DO_LOOKUP, &cell->flags)) {
ret = afs_update_cell(cell);
if (ret < 0)
cell->error = ret;
}
goto done;
}
smp_store_release(&cell->state, AFS_CELL_DEACTIVATING);
wake_up_var(&cell->state);
goto again;
case AFS_CELL_DEACTIVATING:
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
if (atomic_read(&cell->active) > 1)
goto reverse_deactivation;
afs_deactivate_cell(net, cell);
smp_store_release(&cell->state, AFS_CELL_INACTIVE);
wake_up_var(&cell->state);
goto again;
case AFS_CELL_REMOVED:
goto done;
default:
break;
}
_debug("bad state %u", cell->state);
BUG(); /* Unhandled state */
activation_failed:
cell->error = ret;
afs_deactivate_cell(net, cell);
smp_store_release(&cell->state, AFS_CELL_FAILED); /* vs error */
wake_up_var(&cell->state);
goto again;
reverse_deactivation:
smp_store_release(&cell->state, AFS_CELL_ACTIVE);
wake_up_var(&cell->state);
_leave(" [deact->act]");
return;
done:
_leave(" [done %u]", cell->state);
return;
final_destruction:
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
/* The root volume is pinning the cell */
afs_put_volume(cell->net, cell->root_volume, afs_volume_trace_put_cell_root);
cell->root_volume = NULL;
afs_put_cell(cell, afs_cell_trace_put_destroy);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
}
static void afs_manage_cell_work(struct work_struct *work)
{
struct afs_cell *cell = container_of(work, struct afs_cell, manager);
afs_manage_cell(cell);
afs_put_cell(cell, afs_cell_trace_put_queue_work);
}
/*
* Manage the records of cells known to a network namespace. This includes
* updating the DNS records and garbage collecting unused cells that were
* automatically added.
*
* Note that constructed cell records may only be removed from net->cells by
* this work item, so it is safe for this work item to stash a cursor pointing
* into the tree and then return to caller (provided it skips cells that are
* still under construction).
*
* Note also that we were given an increment on net->cells_outstanding by
* whoever queued us that we need to deal with before returning.
*/
void afs_manage_cells(struct work_struct *work)
{
struct afs_net *net = container_of(work, struct afs_net, cells_manager);
struct rb_node *cursor;
time64_t now = ktime_get_real_seconds(), next_manage = TIME64_MAX;
bool purging = !net->live;
_enter("");
/* Trawl the cell database looking for cells that have expired from
* lack of use and cells whose DNS results have expired and dispatch
* their managers.
*/
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
down_read(&net->cells_lock);
for (cursor = rb_first(&net->cells); cursor; cursor = rb_next(cursor)) {
struct afs_cell *cell =
rb_entry(cursor, struct afs_cell, net_node);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
unsigned active;
bool sched_cell = false;
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
active = atomic_read(&cell->active);
trace_afs_cell(cell->debug_id, atomic_read(&cell->ref),
active, afs_cell_trace_manage);
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
ASSERTCMP(active, >=, 1);
if (purging) {
if (test_and_clear_bit(AFS_CELL_FL_NO_GC, &cell->flags)) {
active = atomic_dec_return(&cell->active);
trace_afs_cell(cell->debug_id, atomic_read(&cell->ref),
active, afs_cell_trace_unuse_pin);
}
}
afs: Fix cell refcounting by splitting the usage counter Management of the lifetime of afs_cell struct has some problems due to the usage counter being used to determine whether objects of that type are in use in addition to whether anyone might be interested in the structure. This is made trickier by cell objects being cached for a period of time in case they're quickly reused as they hold the result of a setup process that may be slow (DNS lookups, AFS RPC ops). Problems include the cached root volume from alias resolution pinning its parent cell record, rmmod occasionally hanging and occasionally producing assertion failures. Fix this by splitting the count of active users from the struct reference count. Things then work as follows: (1) The cell cache keeps +1 on the cell's activity count and this has to be dropped before the cell can be removed. afs_manage_cell() tries to exchange the 1 to a 0 with the cells_lock write-locked, and if successful, the record is removed from the net->cells. (2) One struct ref is 'owned' by the activity count. That is put when the active count is reduced to 0 (final_destruction label). (3) A ref can be held on a cell whilst it is queued for management on a work queue without confusing the active count. afs_queue_cell() is added to wrap this. (4) The queue's ref is dropped at the end of the management. This is split out into a separate function, afs_manage_cell_work(). (5) The root volume record is put after a cell is removed (at the final_destruction label) rather then in the RCU destruction routine. (6) Volumes hold struct refs, but aren't active users. (7) Both counts are displayed in /proc/net/afs/cells. There are some management function changes: (*) afs_put_cell() now just decrements the refcount and triggers the RCU destruction if it becomes 0. It no longer sets a timer to have the manager do this. (*) afs_use_cell() and afs_unuse_cell() are added to increase and decrease the active count. afs_unuse_cell() sets the management timer. (*) afs_queue_cell() is added to queue a cell with approprate refs. There are also some other fixes: (*) Don't let /proc/net/afs/cells access a cell's vllist if it's NULL. (*) Make sure that candidate cells in lookups are properly destroyed rather than being simply kfree'd. This ensures the bits it points to are destroyed also. (*) afs_dec_cells_outstanding() is now called in cell destruction rather than at "final_destruction". This ensures that cell->net is still valid to the end of the destructor. (*) As a consequence of the previous two changes, move the increment of net->cells_outstanding that was at the point of insertion into the tree to the allocation routine to correctly balance things. Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <dhowells@redhat.com>
2019-07-23 13:24:59 +03:00
if (active == 1) {
struct afs_vlserver_list *vllist;
time64_t expire_at = cell->last_inactive;
read_lock(&cell->vl_servers_lock);
vllist = rcu_dereference_protected(
cell->vl_servers,
lockdep_is_held(&cell->vl_servers_lock));
if (vllist->nr_servers > 0)
expire_at += afs_cell_gc_delay;
read_unlock(&cell->vl_servers_lock);
if (purging || expire_at <= now)
sched_cell = true;
else if (expire_at < next_manage)
next_manage = expire_at;
}
if (!purging) {
if (test_bit(AFS_CELL_FL_DO_LOOKUP, &cell->flags))
sched_cell = true;
}
if (sched_cell)
afs_queue_cell(cell, afs_cell_trace_get_queue_manage);
}
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
up_read(&net->cells_lock);
/* Update the timer on the way out. We have to pass an increment on
* cells_outstanding in the namespace that we are in to the timer or
* the work scheduler.
*/
if (!purging && next_manage < TIME64_MAX) {
now = ktime_get_real_seconds();
if (next_manage - now <= 0) {
if (queue_work(afs_wq, &net->cells_manager))
atomic_inc(&net->cells_outstanding);
} else {
afs_set_cell_timer(net, next_manage - now);
}
}
afs_dec_cells_outstanding(net);
_leave(" [%d]", atomic_read(&net->cells_outstanding));
}
/*
* Purge in-memory cell database.
*/
void afs_cell_purge(struct afs_net *net)
{
struct afs_cell *ws;
_enter("");
afs: Fix rapid cell addition/removal by not using RCU on cells tree There are a number of problems that are being seen by the rapidly mounting and unmounting an afs dynamic root with an explicit cell and volume specified (which should probably be rejected, but that's a separate issue): What the tests are doing is to look up/create a cell record for the name given and then tear it down again without actually using it to try to talk to a server. This is repeated endlessly, very fast, and the new cell collides with the old one if it's not quick enough to reuse it. It appears (as suggested by Hillf Danton) that the search through the RB tree under a read_seqbegin_or_lock() under RCU conditions isn't safe and that it's not blocking the write_seqlock(), despite taking two passes at it. He suggested that the code should take a ref on the cell it's attempting to look at - but this shouldn't be necessary until we've compared the cell names. It's possible that I'm missing a barrier somewhere. However, using an RCU search for this is overkill, really - we only need to access the cell name in a few places, and they're places where we're may end up sleeping anyway. Fix this by switching to an R/W semaphore instead. Additionally, draw the down_read() call inside the function (renamed to afs_find_cell()) since all the callers were taking the RCU read lock (or should've been[*]). [*] afs_probe_cell_name() should have been, but that doesn't appear to be involved in the bug reports. The symptoms of this look like: general protection fault, probably for non-canonical address 0xf27d208691691fdb: 0000 [#1] PREEMPT SMP KASAN KASAN: maybe wild-memory-access in range [0x93e924348b48fed8-0x93e924348b48fedf] ... RIP: 0010:strncasecmp lib/string.c:52 [inline] RIP: 0010:strncasecmp+0x5f/0x240 lib/string.c:43 afs_lookup_cell_rcu+0x313/0x720 fs/afs/cell.c:88 afs_lookup_cell+0x2ee/0x1440 fs/afs/cell.c:249 afs_parse_source fs/afs/super.c:290 [inline] ... Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Reported-by: syzbot+459a5dce0b4cb70fd076@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> cc: syzkaller-bugs@googlegroups.com
2020-10-09 16:11:58 +03:00
down_write(&net->cells_lock);
ws = net->ws_cell;
net->ws_cell = NULL;
up_write(&net->cells_lock);
afs_unuse_cell(net, ws, afs_cell_trace_unuse_ws);
_debug("del timer");
if (del_timer_sync(&net->cells_timer))
atomic_dec(&net->cells_outstanding);
_debug("kick mgr");
afs_queue_cell_manager(net);
_debug("wait");
wait_var_event(&net->cells_outstanding,
!atomic_read(&net->cells_outstanding));
_leave("");
}