microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/net/wireless/ibss.c

510 строки
11 KiB
C
Исходник Обычный вид История

cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
/*
* Some IBSS support code for cfg80211.
*
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
*/
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <net/cfg80211.h>
cfg80211: combine iwfreq implementations Until now we implemented iwfreq for managed mode, we needed to keep the implementations separate, but now that we have all versions implemented we can combine them and export just one handler. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27 14:01:50 +04:00
#include "wext-compat.h"
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
#include "nl80211.h"
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_bss *bss;
wext: refactor Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-30 01:27:28 +04:00
#ifdef CONFIG_CFG80211_WEXT
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
union iwreq_data wrqu;
#endif
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return;
cfg80211: make spurious warnings less likely, configurable Bob reported that he got warnings in IBSS mode about the ssid_len being zero on a joined event, but only when kmemcheck was enabled. This appears to be due to a race condition between drivers and userspace, when the driver reports joined but the user in the meantime decided to leave the IBSS again, the warning would trigger. This was made more likely by kmemcheck delaying the code that does the check and sends the event. So first, make the warning trigger closer to the driver, which means it's not locked, but since only the warning depends on it that's ok. And secondly, users will not want to have spurious warnings at all, so make those that are known to be racy in such a way configurable. Reported-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:23:49 +04:00
if (!wdev->ssid_len)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return;
bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
wdev->ssid, wdev->ssid_len,
WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
if (WARN_ON(!bss))
return;
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211: keep track of BSSes In order to avoid problems with BSS structs going away while they're in use, I've long wanted to make cfg80211 keep track of them. Without the SME, that wasn't doable but now that we have the SME we can do this too. It can keep track of up to four separate authentications and one association, regardless of whether it's controlled by the cfg80211 SME or the userspace SME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 19:20:43 +04:00
cfg80211_put_bss(&wdev->current_bss->pub);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
cfg80211: keep track of BSSes In order to avoid problems with BSS structs going away while they're in use, I've long wanted to make cfg80211 keep track of them. Without the SME, that wasn't doable but now that we have the SME we can do this too. It can keep track of up to four separate authentications and one association, regardless of whether it's controlled by the cfg80211 SME or the userspace SME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 19:20:43 +04:00
cfg80211_hold_bss(bss_from_pub(bss));
wdev->current_bss = bss_from_pub(bss);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
cfg80211_upload_connect_keys(wdev);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid,
GFP_KERNEL);
wext: refactor Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-30 01:27:28 +04:00
#ifdef CONFIG_CFG80211_WEXT
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
memset(&wrqu, 0, sizeof(wrqu));
memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
#endif
}
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
struct cfg80211_event *ev;
unsigned long flags;
cfg80211: make spurious warnings less likely, configurable Bob reported that he got warnings in IBSS mode about the ssid_len being zero on a joined event, but only when kmemcheck was enabled. This appears to be due to a race condition between drivers and userspace, when the driver reports joined but the user in the meantime decided to leave the IBSS again, the warning would trigger. This was made more likely by kmemcheck delaying the code that does the check and sends the event. So first, make the warning trigger closer to the driver, which means it's not locked, but since only the warning depends on it that's ok. And secondly, users will not want to have spurious warnings at all, so make those that are known to be racy in such a way configurable. Reported-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-21 14:23:49 +04:00
CFG80211_DEV_WARN_ON(!wdev->ssid_len);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
ev = kzalloc(sizeof(*ev), gfp);
if (!ev)
return;
ev->type = EVENT_IBSS_JOINED;
memcpy(ev->cr.bssid, bssid, ETH_ALEN);
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
schedule_work(&rdev->event_work);
}
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
EXPORT_SYMBOL(cfg80211_ibss_joined);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
int __cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
struct net_device *dev,
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
struct cfg80211_ibss_params *params,
struct cfg80211_cached_keys *connkeys)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
struct ieee80211_channel *chan;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
int err;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
ASSERT_WDEV_LOCK(wdev);
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
chan = rdev_fixed_channel(rdev, wdev);
if (chan && chan != params->channel)
return -EBUSY;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
if (wdev->ssid_len)
return -EALREADY;
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
if (WARN_ON(wdev->connect_keys))
kfree(wdev->connect_keys);
wdev->connect_keys = connkeys;
wext: refactor Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-30 01:27:28 +04:00
#ifdef CONFIG_CFG80211_WEXT
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
wdev->wext.ibss.channel = params->channel;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
#endif
err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
if (err) {
wdev->connect_keys = NULL;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return err;
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
}
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
memcpy(wdev->ssid, params->ssid, params->ssid_len);
wdev->ssid_len = params->ssid_len;
return 0;
}
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
int cfg80211_join_ibss(struct cfg80211_registered_device *rdev,
struct net_device *dev,
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
struct cfg80211_ibss_params *params,
struct cfg80211_cached_keys *connkeys)
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
mutex_lock(&rdev->devlist_mtx);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_lock(wdev);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
err = __cfg80211_join_ibss(rdev, dev, params, connkeys);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_unlock(wdev);
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
mutex_unlock(&rdev->devlist_mtx);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
return err;
}
static void __cfg80211_clear_ibss(struct net_device *dev, bool nowext)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
int i;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
ASSERT_WDEV_LOCK(wdev);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
kfree(wdev->connect_keys);
wdev->connect_keys = NULL;
/*
* Delete all the keys ... pairwise keys can't really
* exist any more anyway, but default keys might.
*/
if (rdev->ops->del_key)
for (i = 0; i < 6; i++)
rdev->ops->del_key(wdev->wiphy, dev, i, NULL);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211: keep track of BSSes In order to avoid problems with BSS structs going away while they're in use, I've long wanted to make cfg80211 keep track of them. Without the SME, that wasn't doable but now that we have the SME we can do this too. It can keep track of up to four separate authentications and one association, regardless of whether it's controlled by the cfg80211 SME or the userspace SME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 19:20:43 +04:00
cfg80211_put_bss(&wdev->current_bss->pub);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
wdev->current_bss = NULL;
wdev->ssid_len = 0;
wext: refactor Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-30 01:27:28 +04:00
#ifdef CONFIG_CFG80211_WEXT
cfg80211: clear WEXT SSID when clearing IBSS When we leave an IBSS, we should clear the SSID and not just the BSSID, but since WEXT allows configuring while the interface is down we must not clear it when leaving due to taking the iface down, so some complications are needed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20 20:43:46 +04:00
if (!nowext)
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
wdev->wext.ibss.ssid_len = 0;
cfg80211: clear WEXT SSID when clearing IBSS When we leave an IBSS, we should clear the SSID and not just the BSSID, but since WEXT allows configuring while the interface is down we must not clear it when leaving due to taking the iface down, so some complications are needed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20 20:43:46 +04:00
#endif
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
void cfg80211_clear_ibss(struct net_device *dev, bool nowext)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
wdev_lock(wdev);
__cfg80211_clear_ibss(dev, nowext);
wdev_unlock(wdev);
}
cfg80211: re-join IBSS when privacy changes When going from/to a WEP protected IBSS, we need to leave this one and join a new one to take care of the changed capability. Cc: Hong Zhang <henryzhang62@yahoo.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18 15:03:43 +03:00
int __cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
struct net_device *dev, bool nowext)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
{
cfg80211: fix netdev down problem We shouldn't be looking at the ssid_len for non-IBSS, and for IBSS we should also return an error on trying to leave an IBSS while not in or joining an IBSS. This fixes an issue where we wouldn't disconnect() on an interface being taken down since there's no SSID configured this way. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:05 +04:00
struct wireless_dev *wdev = dev->ieee80211_ptr;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
int err;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
ASSERT_WDEV_LOCK(wdev);
cfg80211: fix netdev down problem We shouldn't be looking at the ssid_len for non-IBSS, and for IBSS we should also return an error on trying to leave an IBSS while not in or joining an IBSS. This fixes an issue where we wouldn't disconnect() on an interface being taken down since there's no SSID configured this way. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:05 +04:00
if (!wdev->ssid_len)
return -ENOLINK;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
err = rdev->ops->leave_ibss(&rdev->wiphy, dev);
if (err)
return err;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
__cfg80211_clear_ibss(dev, nowext);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return 0;
}
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
struct net_device *dev, bool nowext)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err;
wdev_lock(wdev);
err = __cfg80211_leave_ibss(rdev, dev, nowext);
wdev_unlock(wdev);
return err;
}
wext: refactor Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-30 01:27:28 +04:00
#ifdef CONFIG_CFG80211_WEXT
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
{
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
struct cfg80211_cached_keys *ck = NULL;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
enum ieee80211_band band;
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
int i, err;
ASSERT_WDEV_LOCK(wdev);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
if (!wdev->wext.ibss.beacon_interval)
wdev->wext.ibss.beacon_interval = 100;
nl80211: allow configuring IBSS beacon interval Make the JOIN_IBSS command look at the beacon interval attribute to see if the user requested a specific beacon interval, if not default to 100 TU (wext too). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 19:45:38 +04:00
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
/* try to find an IBSS channel if none requested ... */
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
if (!wdev->wext.ibss.channel) {
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
sband = rdev->wiphy.bands[band];
if (!sband)
continue;
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
if (chan->flags & IEEE80211_CHAN_NO_IBSS)
continue;
if (chan->flags & IEEE80211_CHAN_DISABLED)
continue;
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
wdev->wext.ibss.channel = chan;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
break;
}
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
if (wdev->wext.ibss.channel)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
break;
}
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
if (!wdev->wext.ibss.channel)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return -EINVAL;
}
/* don't join -- SSID is not there */
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
if (!wdev->wext.ibss.ssid_len)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return 0;
if (!netif_running(wdev->netdev))
return 0;
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
if (wdev->wext.keys)
wdev->wext.keys->def = wdev->wext.default_key;
wdev->wext.ibss.privacy = wdev->wext.default_key != -1;
if (wdev->wext.keys) {
ck = kmemdup(wdev->wext.keys, sizeof(*ck), GFP_KERNEL);
if (!ck)
return -ENOMEM;
for (i = 0; i < 6; i++)
ck->params[i].key = ck->data[i];
}
err = __cfg80211_join_ibss(rdev, wdev->netdev,
&wdev->wext.ibss, ck);
if (err)
kfree(ck);
return err;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
int cfg80211_ibss_wext_siwfreq(struct net_device *dev,
struct iw_request_info *info,
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
struct iw_freq *wextfreq, char *extra)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
struct ieee80211_channel *chan = NULL;
int err, freq;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
/* call only for ibss! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
if (!rdev->ops->join_ibss)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return -EOPNOTSUPP;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
freq = cfg80211_wext_freq(wdev->wiphy, wextfreq);
if (freq < 0)
return freq;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
if (freq) {
chan = ieee80211_get_channel(wdev->wiphy, freq);
if (!chan)
return -EINVAL;
if (chan->flags & IEEE80211_CHAN_NO_IBSS ||
chan->flags & IEEE80211_CHAN_DISABLED)
return -EINVAL;
}
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
if (wdev->wext.ibss.channel == chan)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return 0;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_lock(wdev);
err = 0;
if (wdev->ssid_len)
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
err = __cfg80211_leave_ibss(rdev, dev, true);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_unlock(wdev);
if (err)
return err;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
if (chan) {
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
wdev->wext.ibss.channel = chan;
wdev->wext.ibss.channel_fixed = true;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
} else {
/* cfg80211_ibss_wext_join will pick one if needed */
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
wdev->wext.ibss.channel_fixed = false;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
mutex_lock(&rdev->devlist_mtx);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
wdev_lock(wdev);
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
err = cfg80211_ibss_wext_join(rdev, wdev);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
wdev_unlock(wdev);
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
mutex_unlock(&rdev->devlist_mtx);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
return err;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
int cfg80211_ibss_wext_giwfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct ieee80211_channel *chan = NULL;
/* call only for ibss! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_lock(wdev);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
if (wdev->current_bss)
cfg80211: keep track of BSSes In order to avoid problems with BSS structs going away while they're in use, I've long wanted to make cfg80211 keep track of them. Without the SME, that wasn't doable but now that we have the SME we can do this too. It can keep track of up to four separate authentications and one association, regardless of whether it's controlled by the cfg80211 SME or the userspace SME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 19:20:43 +04:00
chan = wdev->current_bss->pub.channel;
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
else if (wdev->wext.ibss.channel)
chan = wdev->wext.ibss.channel;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_unlock(wdev);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
if (chan) {
freq->m = chan->center_freq;
freq->e = 6;
return 0;
}
/* no channel if not joining */
return -EINVAL;
}
int cfg80211_ibss_wext_siwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
size_t len = data->length;
int err;
/* call only for ibss! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
if (!rdev->ops->join_ibss)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return -EOPNOTSUPP;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_lock(wdev);
err = 0;
if (wdev->ssid_len)
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
err = __cfg80211_leave_ibss(rdev, dev, true);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_unlock(wdev);
if (err)
return err;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
/* iwconfig uses nul termination in SSID.. */
if (len > 0 && ssid[len - 1] == '\0')
len--;
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
wdev->wext.ibss.ssid = wdev->ssid;
memcpy(wdev->wext.ibss.ssid, ssid, len);
wdev->wext.ibss.ssid_len = len;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
mutex_lock(&rdev->devlist_mtx);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
wdev_lock(wdev);
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
err = cfg80211_ibss_wext_join(rdev, wdev);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
wdev_unlock(wdev);
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
mutex_unlock(&rdev->devlist_mtx);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
return err;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
int cfg80211_ibss_wext_giwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
/* call only for ibss! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
data->flags = 0;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_lock(wdev);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
if (wdev->ssid_len) {
data->flags = 1;
data->length = wdev->ssid_len;
memcpy(ssid, wdev->ssid, data->length);
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
} else if (wdev->wext.ibss.ssid && wdev->wext.ibss.ssid_len) {
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
data->flags = 1;
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
data->length = wdev->wext.ibss.ssid_len;
memcpy(ssid, wdev->wext.ibss.ssid, data->length);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_unlock(wdev);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return 0;
}
int cfg80211_ibss_wext_siwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
u8 *bssid = ap_addr->sa_data;
int err;
/* call only for ibss! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
if (!rdev->ops->join_ibss)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return -EOPNOTSUPP;
if (ap_addr->sa_family != ARPHRD_ETHER)
return -EINVAL;
/* automatic mode */
if (is_zero_ether_addr(bssid) || is_broadcast_ether_addr(bssid))
bssid = NULL;
/* both automatic */
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
if (!bssid && !wdev->wext.ibss.bssid)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return 0;
/* fixed already - and no change */
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
if (wdev->wext.ibss.bssid && bssid &&
compare_ether_addr(bssid, wdev->wext.ibss.bssid) == 0)
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return 0;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_lock(wdev);
err = 0;
if (wdev->ssid_len)
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
err = __cfg80211_leave_ibss(rdev, dev, true);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_unlock(wdev);
if (err)
return err;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
if (bssid) {
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
memcpy(wdev->wext.bssid, bssid, ETH_ALEN);
wdev->wext.ibss.bssid = wdev->wext.bssid;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
} else
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
wdev->wext.ibss.bssid = NULL;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
mutex_lock(&rdev->devlist_mtx);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
wdev_lock(wdev);
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
err = cfg80211_ibss_wext_join(rdev, wdev);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
wdev_unlock(wdev);
cfg80211: validate channel settings across interfaces Currently, there's a problem that affects regulatory enforcement and connection stability, in that it is possible to switch the channel while connected to a network or joined to an IBSS. The problem comes from the fact that we only validate the channel against the current interface's type, not against any other interface. Thus, you have any type of interface up, additionally bring up a monitor mode interface and switch the channel on the monitor. This will obviously also switch the channel on the other interface. The problem now is that if you do that while sending beacons for IBSS mode, you can switch to a disabled channel or a channel that doesn't allow beaconing. Combined with a managed mode interface connected to an AP instead of an IBSS interface, you can easily break the connection that way. To fix this, this patch validates any channel change with all available interfaces, and disallows such changes on secondary interfaces if another interface is connected to an AP or joined to an IBSS. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-07 19:22:35 +04:00
mutex_unlock(&rdev->devlist_mtx);
cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08 16:22:54 +04:00
return err;
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
}
int cfg80211_ibss_wext_giwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
/* call only for ibss! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_ADHOC))
return -EINVAL;
ap_addr->sa_family = ARPHRD_ETHER;
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_lock(wdev);
cfg80211: remove wireless_dev->bssid This variable isn't necessary -- the wext code keeps track of the BSSID itself, and otherwise we have current_bss. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 23:26:48 +04:00
if (wdev->current_bss)
cfg80211: keep track of BSSes In order to avoid problems with BSS structs going away while they're in use, I've long wanted to make cfg80211 keep track of them. Without the SME, that wasn't doable but now that we have the SME we can do this too. It can keep track of up to four separate authentications and one association, regardless of whether it's controlled by the cfg80211 SME or the userspace SME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-02 19:20:43 +04:00
memcpy(ap_addr->sa_data, wdev->current_bss->pub.bssid, ETH_ALEN);
cfg80211: fix NULL dereference in IBSS SIOCGIWAP This patch avoids memcpy from wdev->wext.ibss.bssid if it is NULL. This could happen if we SIOCGIWAP before SIOCSIWAP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-09 12:59:49 +04:00
else if (wdev->wext.ibss.bssid)
cfg80211: put wext data into substructure To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-09 22:09:03 +04:00
memcpy(ap_addr->sa_data, wdev->wext.ibss.bssid, ETH_ALEN);
cfg80211: fix NULL dereference in IBSS SIOCGIWAP This patch avoids memcpy from wdev->wext.ibss.bssid if it is NULL. This could happen if we SIOCGIWAP before SIOCSIWAP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-09 12:59:49 +04:00
else
memset(ap_addr->sa_data, 0, ETH_ALEN);
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07 05:56:11 +04:00
wdev_unlock(wdev);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 23:24:32 +04:00
return 0;
}
#endif