microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/clk/meson/clk-pll.h

51 строка
993 B
C
Исходник Обычный вид История

clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 15:58:41 +03:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2019 BayLibre, SAS.
* Author: Jerome Brunet <jbrunet@baylibre.com>
*/
#ifndef __MESON_CLK_PLL_H
#define __MESON_CLK_PLL_H
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include "parm.h"
struct pll_params_table {
clk: meson: pll: update driver for the g12a The g12a use fractional parameter of 17 useful bits. At the moment, this parameter in encoded using u16 value. Use this opportunity to switch all the pll to parameter to unsigned int. This should save us some annoying trouble shooting when and m and n field eventually grow as well. This patch also introduce pll multiplier range. On the g12a, the hifi and gp0 plls are able to lock as long as the following condition is met: 55 <= m/n <= 255. The param table describing this would be huge which is a waste of memory. Using ranges, we can save memory. Ranges also help find the best pll parameter significantly faster since we don't have to try all the possible settings. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [jbrunet: fixed fix pll settings calculation with arm32] Link: https://lkml.kernel.org/r/20190201145345.6795-2-jbrunet@baylibre.com
2019-02-01 17:53:42 +03:00
unsigned int m;
unsigned int n;
};
struct pll_mult_range {
unsigned int min;
unsigned int max;
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 15:58:41 +03:00
};
#define PLL_PARAMS(_m, _n) \
{ \
.m = (_m), \
.n = (_n), \
}
#define CLK_MESON_PLL_ROUND_CLOSEST BIT(0)
struct meson_clk_pll_data {
struct parm en;
struct parm m;
struct parm n;
struct parm frac;
struct parm l;
struct parm rst;
const struct reg_sequence *init_regs;
unsigned int init_count;
const struct pll_params_table *table;
clk: meson: pll: update driver for the g12a The g12a use fractional parameter of 17 useful bits. At the moment, this parameter in encoded using u16 value. Use this opportunity to switch all the pll to parameter to unsigned int. This should save us some annoying trouble shooting when and m and n field eventually grow as well. This patch also introduce pll multiplier range. On the g12a, the hifi and gp0 plls are able to lock as long as the following condition is met: 55 <= m/n <= 255. The param table describing this would be huge which is a waste of memory. Using ranges, we can save memory. Ranges also help find the best pll parameter significantly faster since we don't have to try all the possible settings. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [jbrunet: fixed fix pll settings calculation with arm32] Link: https://lkml.kernel.org/r/20190201145345.6795-2-jbrunet@baylibre.com
2019-02-01 17:53:42 +03:00
const struct pll_mult_range *range;
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 15:58:41 +03:00
u8 flags;
};
extern const struct clk_ops meson_clk_pll_ro_ops;
extern const struct clk_ops meson_clk_pll_ops;
clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL The Meson G12A PCIE PLL is fined tuned to deliver a very precise 100MHz reference clock for the PCIe Analog PHY, and thus requires a strict register sequence to enable the PLL. To simplify, use the _init() op to enable the PLL and keep the other ops except set_rate since the rate is fixed. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190307141455.23879-2-narmstrong@baylibre.com
2019-03-07 17:14:53 +03:00
extern const struct clk_ops meson_clk_pcie_pll_ops;
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 15:58:41 +03:00
#endif /* __MESON_CLK_PLL_H */