WSL2-Linux-Kernel/drivers/firmware/memmap.c

428 строки
12 KiB
C
Исходник Обычный вид История

sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
/*
* linux/drivers/firmware/memmap.c
* Copyright (C) 2008 SUSE LINUX Products GmbH
* by Bernhard Walle <bernhard.walle@gmx.de>
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2.0 as published by
* the Free Software Foundation
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/string.h>
#include <linux/firmware-map.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 01:09:49 +03:00
#include <linux/memblock.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
#include <linux/mm.h>
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
/*
* Data types ------------------------------------------------------------------
*/
/*
* Firmware map entry. Because firmware memory maps are flat and not
* hierarchical, it's ok to organise them in a linked list. No parent
* information is necessary as for the resource tree.
*/
struct firmware_map_entry {
/*
* start and end must be u64 rather than resource_size_t, because e820
* resources can lie at addresses above 4G.
*/
u64 start; /* start of the memory range */
u64 end; /* end of the memory range (incl.) */
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
const char *type; /* type of the memory range */
struct list_head list; /* entry for the linked list */
struct kobject kobj; /* kobject for each entry */
};
/*
* Forward declarations --------------------------------------------------------
*/
static ssize_t memmap_attr_show(struct kobject *kobj,
struct attribute *attr, char *buf);
static ssize_t start_show(struct firmware_map_entry *entry, char *buf);
static ssize_t end_show(struct firmware_map_entry *entry, char *buf);
static ssize_t type_show(struct firmware_map_entry *entry, char *buf);
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
static struct firmware_map_entry * __meminit
firmware_map_find_entry(u64 start, u64 end, const char *type);
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
/*
* Static data -----------------------------------------------------------------
*/
struct memmap_attribute {
struct attribute attr;
ssize_t (*show)(struct firmware_map_entry *entry, char *buf);
};
static struct memmap_attribute memmap_start_attr = __ATTR_RO(start);
static struct memmap_attribute memmap_end_attr = __ATTR_RO(end);
static struct memmap_attribute memmap_type_attr = __ATTR_RO(type);
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
/*
* These are default attributes that are added for every memmap entry.
*/
static struct attribute *def_attrs[] = {
&memmap_start_attr.attr,
&memmap_end_attr.attr,
&memmap_type_attr.attr,
NULL
};
static const struct sysfs_ops memmap_attr_ops = {
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
.show = memmap_attr_show,
};
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
/* Firmware memory map entries. */
static LIST_HEAD(map_entries);
static DEFINE_SPINLOCK(map_entries_lock);
/*
* For memory hotplug, there is no way to free memory map entries allocated
* by boot mem after the system is up. So when we hot-remove memory whose
* map entry is allocated by bootmem, we need to remember the storage and
* reuse it when the memory is hot-added again.
*/
static LIST_HEAD(map_entries_bootmem);
static DEFINE_SPINLOCK(map_entries_bootmem_lock);
static inline struct firmware_map_entry *
to_memmap_entry(struct kobject *kobj)
{
return container_of(kobj, struct firmware_map_entry, kobj);
}
static void __meminit release_firmware_map_entry(struct kobject *kobj)
{
struct firmware_map_entry *entry = to_memmap_entry(kobj);
if (PageReserved(virt_to_page(entry))) {
/*
* Remember the storage allocated by bootmem, and reuse it when
* the memory is hot-added again. The entry will be added to
* map_entries_bootmem here, and deleted from &map_entries in
* firmware_map_remove_entry().
*/
firmware, memmap: fix firmware_map_entry leak When hot removing memory, a firmware_map_entry which has memory range of the memory is released by release_firmware_map_entry(). If the entry is allocated by bootmem, release_firmware_map_entry() adds the entry to map_entires_bootmem list when firmware_map_find_entry() finds the entry from map_entries list. But firmware_map_find_entry never find the entry sicne map_entires list does not have the entry. So the entry just leaks. Here are steps of leaking firmware_map_entry: firmware_map_remove() -> firmware_map_find_entry() Find released entry from map_entries list -> firmware_map_remove_entry() Delete the entry from map_entries list -> remove_sysfs_fw_map_entry() ... -> release_firmware_map_entry() -> firmware_map_find_entry() Find the entry from map_entries list but the entry has been deleted from map_entries list. So the entry is not added to map_entries_bootmem. Thus the entry leaks release_firmware_map_entry() should not call firmware_map_find_entry() since releaed entry has been deleted from map_entries list. So the patch delete firmware_map_find_entry() from releae_firmware_map_entry() Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 02:08:39 +04:00
spin_lock(&map_entries_bootmem_lock);
list_add(&entry->list, &map_entries_bootmem);
spin_unlock(&map_entries_bootmem_lock);
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
return;
}
kfree(entry);
}
static struct kobj_type __refdata memmap_ktype = {
.release = release_firmware_map_entry,
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
.sysfs_ops = &memmap_attr_ops,
.default_attrs = def_attrs,
};
/*
* Registration functions ------------------------------------------------------
*/
/**
* firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
* @start: Start of the memory range.
* @end: End of the memory range (exclusive).
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
* @type: Type of the memory range.
* @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
* entry.
*
* Common implementation of firmware_map_add() and firmware_map_add_early()
* which expects a pre-allocated struct firmware_map_entry.
*
* Return: 0 always
*/
static int firmware_map_add_entry(u64 start, u64 end,
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
const char *type,
struct firmware_map_entry *entry)
{
BUG_ON(start > end);
entry->start = start;
entry->end = end - 1;
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
entry->type = type;
INIT_LIST_HEAD(&entry->list);
kobject_init(&entry->kobj, &memmap_ktype);
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
spin_lock(&map_entries_lock);
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
list_add_tail(&entry->list, &map_entries);
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
spin_unlock(&map_entries_lock);
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
return 0;
}
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
/**
* firmware_map_remove_entry() - Does the real work to remove a firmware
* memmap entry.
* @entry: removed entry.
*
* The caller must hold map_entries_lock, and release it properly.
*/
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
static inline void firmware_map_remove_entry(struct firmware_map_entry *entry)
{
list_del(&entry->list);
}
/*
* Add memmap entry on sysfs
*/
static int add_sysfs_fw_map_entry(struct firmware_map_entry *entry)
{
static int map_entries_nr;
static struct kset *mmap_kset;
drivers/firmware/memmap.c: don't create memmap sysfs of same firmware_map_entry By the following commits, we prevented from allocating firmware_map_entry of same memory range: f0093ede: drivers/firmware/memmap.c: don't allocate firmware_map_entry of same memory range 49c8b24d: drivers/firmware/memmap.c: pass the correct argument to firmware_map_find_entry_bootmem() But it's not enough. When PNP0C80 device is added by acpi_scan_init(), memmap sysfses of same firmware_map_entry are created twice as follows: # cat /sys/firmware/memmap/*/start 0x40000000000 0x60000000000 0x4a837000 0x4a83a000 0x4a8b5000 ... 0x40000000000 0x60000000000 ... The flows of the issues are as follows: 1. e820_reserve_resources() allocates firmware_map_entrys of all memory ranges defined in e820. And, these firmware_map_entrys are linked with map_entries list. map_entries -> entry 1 -> ... -> entry N 2. When PNP0C80 device is limited by mem= boot option, acpi_scan_init() added the memory device. In this case, firmware_map_add_hotplug() allocates firmware_map_entry and creates memmap sysfs. map_entries -> entry 1 -> ... -> entry N -> entry N+1 | memmap 1 3. firmware_memmap_init() creates memmap sysfses of firmware_map_entrys linked with map_entries. map_entries -> entry 1 -> ... -> entry N -> entry N+1 | | | memmap 2 memmap N+1 memmap 1 memmap N+2 So while hot removing the PNP0C80 device, kernel panic occurs as follows: BUG: unable to handle kernel paging request at 00000001003e000b IP: sysfs_open_file+0x46/0x2b0 PGD 203a89fe067 PUD 0 Oops: 0000 [#1] SMP ... Call Trace: do_dentry_open+0x1ef/0x2a0 finish_open+0x31/0x40 do_last+0x57c/0x1220 path_openat+0xc2/0x4c0 do_filp_open+0x4b/0xb0 do_sys_open+0xf3/0x1f0 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b The patch adds a check of confirming whether memmap sysfs of firmware_map_entry has been created, and does not create memmap sysfs of same firmware_map_entry. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 02:29:07 +04:00
if (entry->kobj.state_in_sysfs)
return -EEXIST;
if (!mmap_kset) {
mmap_kset = kset_create_and_add("memmap", NULL, firmware_kobj);
if (!mmap_kset)
return -ENOMEM;
}
entry->kobj.kset = mmap_kset;
if (kobject_add(&entry->kobj, NULL, "%d", map_entries_nr++))
kobject_put(&entry->kobj);
return 0;
}
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
/*
* Remove memmap entry on sysfs
*/
static inline void remove_sysfs_fw_map_entry(struct firmware_map_entry *entry)
{
kobject_put(&entry->kobj);
}
/**
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
* firmware_map_find_entry_in_list() - Search memmap entry in a given list.
* @start: Start of the memory range.
* @end: End of the memory range (exclusive).
* @type: Type of the memory range.
* @list: In which to find the entry.
*
* This function is to find the memmap entey of a given memory range in a
* given list. The caller must hold map_entries_lock, and must not release
* the lock until the processing of the returned entry has completed.
*
* Return: Pointer to the entry to be found on success, or NULL on failure.
*/
static struct firmware_map_entry * __meminit
firmware_map_find_entry_in_list(u64 start, u64 end, const char *type,
struct list_head *list)
{
struct firmware_map_entry *entry;
list_for_each_entry(entry, list, list)
if ((entry->start == start) && (entry->end == end) &&
(!strcmp(entry->type, type))) {
return entry;
}
return NULL;
}
/**
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
* firmware_map_find_entry() - Search memmap entry in map_entries.
* @start: Start of the memory range.
* @end: End of the memory range (exclusive).
* @type: Type of the memory range.
*
* This function is to find the memmap entey of a given memory range.
* The caller must hold map_entries_lock, and must not release the lock
* until the processing of the returned entry has completed.
*
* Return: Pointer to the entry to be found on success, or NULL on failure.
*/
static struct firmware_map_entry * __meminit
firmware_map_find_entry(u64 start, u64 end, const char *type)
{
return firmware_map_find_entry_in_list(start, end, type, &map_entries);
}
/**
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
* firmware_map_find_entry_bootmem() - Search memmap entry in map_entries_bootmem.
* @start: Start of the memory range.
* @end: End of the memory range (exclusive).
* @type: Type of the memory range.
*
* This function is similar to firmware_map_find_entry except that it find the
* given entry in map_entries_bootmem.
*
* Return: Pointer to the entry to be found on success, or NULL on failure.
*/
static struct firmware_map_entry * __meminit
firmware_map_find_entry_bootmem(u64 start, u64 end, const char *type)
{
return firmware_map_find_entry_in_list(start, end, type,
&map_entries_bootmem);
}
/**
* firmware_map_add_hotplug() - Adds a firmware mapping entry when we do
* memory hotplug.
* @start: Start of the memory range.
* @end: End of the memory range (exclusive)
* @type: Type of the memory range.
*
* Adds a firmware mapping entry. This function is for memory hotplug, it is
* similar to function firmware_map_add_early(). The only difference is that
* it will create the syfs entry dynamically.
*
* Return: 0 on success, or -ENOMEM if no memory could be allocated.
*/
int __meminit firmware_map_add_hotplug(u64 start, u64 end, const char *type)
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
{
struct firmware_map_entry *entry;
drivers/firmware/memmap.c: don't allocate firmware_map_entry of same memory range When limiting memory by mem= and ACPI DSDT table has PNP0C80, firmware_map_entrys of same memory range are allocated and memmap X sysfses which have same memory range are created as follows: # cat /sys/firmware/memmap/0/* 0x407ffffffff 0x40000000000 System RAM # cat /sys/firmware/memmap/33/* 0x407ffffffff 0x40000000000 System RAM # cat /sys/firmware/memmap/35/* 0x407ffffffff 0x40000000000 System RAM In this case, when hot-removing memory, kernel panic occurs, showing following call trace: BUG: unable to handle kernel paging request at 00000001003e000b IP: sysfs_open_file+0x46/0x2b0 PGD 203a89fe067 PUD 0 Oops: 0000 [#1] SMP ... Call Trace: do_dentry_open+0x1ef/0x2a0 finish_open+0x31/0x40 do_last+0x57c/0x1220 path_openat+0xc2/0x4c0 do_filp_open+0x4b/0xb0 do_sys_open+0xf3/0x1f0 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b The problem occurs as follows: When calling e820_reserve_resources(), firmware_map_entrys of all e820 memory map are allocated. And all firmware_map_entrys is added map_entries list as follows: map_entries -> +--- entry A --------+ -> ... | start 0x407ffffffff| | end 0x40000000000| | type System RAM | +--------------------+ After that, if ACPI DSDT table has PNP0C80 and the memory range is limited by mem=, the PNP0C80 is hot-added. Then firmware_map_entry of PNP0C80 is allocated and added map_entries list as follows: map_entries -> +--- entry A --------+ -> ... -> +--- entry B --------+ | start 0x407ffffffff| | start 0x407ffffffff| | end 0x40000000000| | end 0x40000000000| | type System RAM | | type System RAM | +--------------------+ +--------------------+ Then memmap 0 sysfs for entry B is created. After that, firmware_memmap_init() creates memmap sysfses of all firmware_map_entrys in map_entries list. As a result, memmap 33 sysfs for entry A and memmap 35 sysfs for entry B are created. But kobject of entry B has been used by memmap 0 sysfs. So when creating memmap 35 sysfs, the kobject is broken. If hot-removing memory, memmap 0 sysfs is destroyed and kobject of memmap 0 sysfs is freed. But the kobject can be accessed via memmap 35 sysfs. So when open memmap 35 sysfs, kernel panic occurs. This patch checks whether there is firmware_map_entry of same memory range in map_entries list and don't allocate firmware_map_entry of same memroy range. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07 03:07:03 +04:00
entry = firmware_map_find_entry(start, end - 1, type);
if (entry)
return 0;
entry = firmware_map_find_entry_bootmem(start, end - 1, type);
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
if (!entry) {
entry = kzalloc(sizeof(struct firmware_map_entry), GFP_ATOMIC);
if (!entry)
return -ENOMEM;
} else {
/* Reuse storage allocated by bootmem. */
spin_lock(&map_entries_bootmem_lock);
list_del(&entry->list);
spin_unlock(&map_entries_bootmem_lock);
memset(entry, 0, sizeof(*entry));
}
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
firmware_map_add_entry(start, end, type, entry);
/* create the memmap entry */
add_sysfs_fw_map_entry(entry);
return 0;
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
}
/**
* firmware_map_add_early() - Adds a firmware mapping entry.
* @start: Start of the memory range.
* @end: End of the memory range.
* @type: Type of the memory range.
*
* Adds a firmware mapping entry. This function uses the bootmem allocator
* for memory allocation.
*
* That function must be called before late_initcall.
*
* Return: 0 on success, or -ENOMEM if no memory could be allocated.
*/
int __init firmware_map_add_early(u64 start, u64 end, const char *type)
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
{
struct firmware_map_entry *entry;
memblock: stop using implicit alignment to SMP_CACHE_BYTES When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 01:09:57 +03:00
entry = memblock_alloc(sizeof(struct firmware_map_entry),
SMP_CACHE_BYTES);
if (WARN_ON(!entry))
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
return -ENOMEM;
return firmware_map_add_entry(start, end, type, entry);
}
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
/**
* firmware_map_remove() - remove a firmware mapping entry
* @start: Start of the memory range.
* @end: End of the memory range.
* @type: Type of the memory range.
*
* removes a firmware mapping entry.
*
* Return: 0 on success, or -EINVAL if no entry.
*/
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
int __meminit firmware_map_remove(u64 start, u64 end, const char *type)
{
struct firmware_map_entry *entry;
spin_lock(&map_entries_lock);
entry = firmware_map_find_entry(start, end - 1, type);
if (!entry) {
spin_unlock(&map_entries_lock);
return -EINVAL;
}
firmware_map_remove_entry(entry);
spin_unlock(&map_entries_lock);
/* remove the memmap entry */
remove_sysfs_fw_map_entry(entry);
return 0;
}
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
/*
* Sysfs functions -------------------------------------------------------------
*/
static ssize_t start_show(struct firmware_map_entry *entry, char *buf)
{
return snprintf(buf, PAGE_SIZE, "0x%llx\n",
(unsigned long long)entry->start);
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
}
static ssize_t end_show(struct firmware_map_entry *entry, char *buf)
{
return snprintf(buf, PAGE_SIZE, "0x%llx\n",
(unsigned long long)entry->end);
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
}
static ssize_t type_show(struct firmware_map_entry *entry, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", entry->type);
}
memory-hotplug: remove /sys/firmware/memmap/X sysfs When (hot)adding memory into system, /sys/firmware/memmap/X/{end, start, type} sysfs files are created. But there is no code to remove these files. This patch implements the function to remove them. We cannot free firmware_map_entry which is allocated by bootmem because there is no way to do so when the system is up. But we can at least remember the address of that memory and reuse the storage when the memory is added next time. This patch also introduces a new list map_entries_bootmem to link the map entries allocated by bootmem when they are removed, and a lock to protect it. And these entries will be reused when the memory is hot-added again. The idea is suggestted by Andrew Morton. NOTE: It is unsafe to return an entry pointer and release the map_entries_lock. So we should not hold the map_entries_lock separately in firmware_map_find_entry() and firmware_map_remove_entry(). Hold the map_entries_lock across find and remove /sys/firmware/memmap/X operation. And also, users of these two functions need to be careful to hold the lock when using these two functions. [tangchen@cn.fujitsu.com: Hold spinlock across find|remove /sys operation] [tangchen@cn.fujitsu.com: fix the wrong comments of map_entries] [tangchen@cn.fujitsu.com: reuse the storage of /sys/firmware/memmap/X/ allocated by bootmem] [tangchen@cn.fujitsu.com: fix section mismatch problem] [tangchen@cn.fujitsu.com: fix the doc format in drivers/firmware/memmap.c] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:32:56 +04:00
static inline struct memmap_attribute *to_memmap_attr(struct attribute *attr)
{
return container_of(attr, struct memmap_attribute, attr);
}
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
static ssize_t memmap_attr_show(struct kobject *kobj,
struct attribute *attr, char *buf)
{
struct firmware_map_entry *entry = to_memmap_entry(kobj);
struct memmap_attribute *memmap_attr = to_memmap_attr(attr);
return memmap_attr->show(entry, buf);
}
/*
* Initialises stuff and adds the entries in the map_entries list to
* sysfs. Important is that firmware_map_add() and firmware_map_add_early()
* must be called before late_initcall. That's just because that function
* is called as late_initcall() function, which means that if you call
* firmware_map_add() or firmware_map_add_early() afterwards, the entries
* are not added to sysfs.
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
*/
static int __init firmware_memmap_init(void)
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
{
struct firmware_map_entry *entry;
list_for_each_entry(entry, &map_entries, list)
add_sysfs_fw_map_entry(entry);
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
return 0;
}
late_initcall(firmware_memmap_init);
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00