License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2005-04-17 02:20:36 +04:00
|
|
|
#ifndef _LINUX_MM_H
|
|
|
|
#define _LINUX_MM_H
|
|
|
|
|
|
|
|
#include <linux/errno.h>
|
|
|
|
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
|
2014-01-24 03:52:54 +04:00
|
|
|
#include <linux/mmdebug.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
#include <linux/gfp.h>
|
2011-11-24 05:12:59 +04:00
|
|
|
#include <linux/bug.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/mmzone.h>
|
|
|
|
#include <linux/rbtree.h>
|
2011-12-09 02:33:54 +04:00
|
|
|
#include <linux/atomic.h>
|
2006-07-03 11:24:33 +04:00
|
|
|
#include <linux/debug_locks.h>
|
2006-09-27 12:50:01 +04:00
|
|
|
#include <linux/mm_types.h>
|
2010-02-10 12:20:20 +03:00
|
|
|
#include <linux/range.h>
|
2010-05-25 01:32:53 +04:00
|
|
|
#include <linux/pfn.h>
|
2016-01-16 03:56:55 +03:00
|
|
|
#include <linux/percpu-refcount.h>
|
2011-01-14 02:46:32 +03:00
|
|
|
#include <linux/bit_spinlock.h>
|
2011-07-08 08:14:42 +04:00
|
|
|
#include <linux/shrinker.h>
|
2014-10-10 02:27:29 +04:00
|
|
|
#include <linux/resource.h>
|
mm/debug-pagealloc: prepare boottime configurable on/off
Until now, debug-pagealloc needs extra flags in struct page, so we need to
recompile whole source code when we decide to use it. This is really
painful, because it takes some time to recompile and sometimes rebuild is
not possible due to third party module depending on struct page. So, we
can't use this good feature in many cases.
Now, we have the page extension feature that allows us to insert extra
flags to outside of struct page. This gets rid of third party module
issue mentioned above. And, this allows us to determine if we need extra
memory for this page extension in boottime. With these property, we can
avoid using debug-pagealloc in boottime with low computational overhead in
the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our
development process greatly.
This patch is the preparation step to achive above goal. debug-pagealloc
originally uses extra field of struct page, but, after this patch, it will
use field of struct page_ext. Because memory for page_ext is allocated
later than initialization of page allocator in CONFIG_SPARSEMEM, we should
disable debug-pagealloc feature temporarily until initialization of
page_ext. This patch implements this.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 03:55:49 +03:00
|
|
|
#include <linux/page_ext.h>
|
2015-07-13 17:55:44 +03:00
|
|
|
#include <linux/err.h>
|
2016-03-18 00:19:26 +03:00
|
|
|
#include <linux/page_ref.h>
|
2017-09-09 02:11:46 +03:00
|
|
|
#include <linux/memremap.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
struct mempolicy;
|
|
|
|
struct anon_vma;
|
mm anon rmap: replace same_anon_vma linked list with an interval tree.
When a large VMA (anon or private file mapping) is first touched, which
will populate its anon_vma field, and then split into many regions through
the use of mprotect(), the original anon_vma ends up linking all of the
vmas on a linked list. This can cause rmap to become inefficient, as we
have to walk potentially thousands of irrelevent vmas before finding the
one a given anon page might fall into.
By replacing the same_anon_vma linked list with an interval tree (where
each avc's interval is determined by its vma's start and last pgoffs), we
can make rmap efficient for this use case again.
While the change is large, all of its pieces are fairly simple.
Most places that were walking the same_anon_vma list were looking for a
known pgoff, so they can just use the anon_vma_interval_tree_foreach()
interval tree iterator instead. The exception here is ksm, where the
page's index is not known. It would probably be possible to rework ksm so
that the index would be known, but for now I have decided to keep things
simple and just walk the entirety of the interval tree there.
When updating vma's that already have an anon_vma assigned, we must take
care to re-index the corresponding avc's on their interval tree. This is
done through the use of anon_vma_interval_tree_pre_update_vma() and
anon_vma_interval_tree_post_update_vma(), which remove the avc's from
their interval tree before the update and re-insert them after the update.
The anon_vma stays locked during the update, so there is no chance that
rmap would miss the vmas that are being updated.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 03:31:39 +04:00
|
|
|
struct anon_vma_chain;
|
2007-07-30 02:36:13 +04:00
|
|
|
struct file_ra_state;
|
Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.
This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
getting them indirectly
Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
they don't need sched.h
b) sched.h stops being dependency for significant number of files:
on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
after patch it's only 3744 (-8.3%).
Cross-compile tested on
all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
alpha alpha-up
arm
i386 i386-up i386-defconfig i386-allnoconfig
ia64 ia64-up
m68k
mips
parisc parisc-up
powerpc powerpc-up
s390 s390-up
sparc sparc-up
sparc64 sparc64-up
um-x86_64
x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig
as well as my two usual configs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 01:22:52 +04:00
|
|
|
struct user_struct;
|
2007-07-30 02:36:13 +04:00
|
|
|
struct writeback_control;
|
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
The mechanism for detecting whether an inode should switch its wb
(bdi_writeback) association is now in place. This patch build the
framework for the actual switching.
This patch adds a new inode flag I_WB_SWITCHING, which has two
functions. First, the easy one, it ensures that there's only one
switching in progress for a give inode. Second, it's used as a
mechanism to synchronize wb stat updates.
The two stats, WB_RECLAIMABLE and WB_WRITEBACK, aren't event counters
but track the current number of dirty pages and pages under writeback
respectively. As such, when an inode is moved from one wb to another,
the inode's portion of those stats have to be transferred together;
unfortunately, this is a bit tricky as those stat updates are percpu
operations which are performed without holding any lock in some
places.
This patch solves the problem in a similar way as memcg. Each such
lockless stat updates are wrapped in transaction surrounded by
unlocked_inode_to_wb_begin/end(). During normal operation, they map
to rcu_read_lock/unlock(); however, if I_WB_SWITCHING is asserted,
mapping->tree_lock is grabbed across the transaction.
In turn, the switching path sets I_WB_SWITCHING and waits for a RCU
grace period to pass before actually starting to switch, which
guarantees that all stat update paths are synchronizing against
mapping->tree_lock.
This patch still doesn't implement the actual switching.
v3: Updated on top of the recent cancel_dirty_page() updates.
unlocked_inode_to_wb_begin() now nests inside
mem_cgroup_begin_page_stat() to match the locking order.
v2: The i_wb access transaction will be used for !stat accesses too.
Function names and comments updated accordingly.
s/inode_wb_stat_unlocked_{begin|end}/unlocked_inode_to_wb_{begin|end}/
s/switch_wb/switch_wbs/
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-28 21:50:53 +03:00
|
|
|
struct bdi_writeback;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2017-04-01 01:11:47 +03:00
|
|
|
void init_mm_internals(void);
|
|
|
|
|
2013-07-04 02:04:23 +04:00
|
|
|
#ifndef CONFIG_NEED_MULTIPLE_NODES /* Don't use mapnrs, do it properly */
|
2005-04-17 02:20:36 +04:00
|
|
|
extern unsigned long max_mapnr;
|
2013-07-04 02:04:23 +04:00
|
|
|
|
|
|
|
static inline void set_max_mapnr(unsigned long limit)
|
|
|
|
{
|
|
|
|
max_mapnr = limit;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void set_max_mapnr(unsigned long limit) { }
|
2005-04-17 02:20:36 +04:00
|
|
|
#endif
|
|
|
|
|
2009-09-22 04:03:05 +04:00
|
|
|
extern unsigned long totalram_pages;
|
2005-04-17 02:20:36 +04:00
|
|
|
extern void * high_memory;
|
|
|
|
extern int page_cluster;
|
|
|
|
|
|
|
|
#ifdef CONFIG_SYSCTL
|
|
|
|
extern int sysctl_legacy_va_layout;
|
|
|
|
#else
|
|
|
|
#define sysctl_legacy_va_layout 0
|
|
|
|
#endif
|
|
|
|
|
mm: mmap: add new /proc tunable for mmap_base ASLR
Address Space Layout Randomization (ASLR) provides a barrier to
exploitation of user-space processes in the presence of security
vulnerabilities by making it more difficult to find desired code/data
which could help an attack. This is done by adding a random offset to
the location of regions in the process address space, with a greater
range of potential offset values corresponding to better protection/a
larger search-space for brute force, but also to greater potential for
fragmentation.
The offset added to the mmap_base address, which provides the basis for
the majority of the mappings for a process, is set once on process exec
in arch_pick_mmap_layout() and is done via hard-coded per-arch values,
which reflect, hopefully, the best compromise for all systems. The
trade-off between increased entropy in the offset value generation and
the corresponding increased variability in address space fragmentation
is not absolute, however, and some platforms may tolerate higher amounts
of entropy. This patch introduces both new Kconfig values and a sysctl
interface which may be used to change the amount of entropy used for
offset generation on a system.
The direct motivation for this change was in response to the
libstagefright vulnerabilities that affected Android, specifically to
information provided by Google's project zero at:
http://googleprojectzero.blogspot.com/2015/09/stagefrightened.html
The attack presented therein, by Google's project zero, specifically
targeted the limited randomness used to generate the offset added to the
mmap_base address in order to craft a brute-force-based attack.
Concretely, the attack was against the mediaserver process, which was
limited to respawning every 5 seconds, on an arm device. The hard-coded
8 bits used resulted in an average expected success rate of defeating
the mmap ASLR after just over 10 minutes (128 tries at 5 seconds a
piece). With this patch, and an accompanying increase in the entropy
value to 16 bits, the same attack would take an average expected time of
over 45 hours (32768 tries), which makes it both less feasible and more
likely to be noticed.
The introduced Kconfig and sysctl options are limited by per-arch
minimum and maximum values, the minimum of which was chosen to match the
current hard-coded value and the maximum of which was chosen so as to
give the greatest flexibility without generating an invalid mmap_base
address, generally a 3-4 bits less than the number of bits in the
user-space accessible virtual address space.
When decided whether or not to change the default value, a system
developer should consider that mmap_base address could be placed
anywhere up to 2^(value) bits away from the non-randomized location,
which would introduce variable-sized areas above and below the mmap_base
address such that the maximum vm_area_struct size may be reduced,
preventing very large allocations.
This patch (of 4):
ASLR only uses as few as 8 bits to generate the random offset for the
mmap base address on 32 bit architectures. This value was chosen to
prevent a poorly chosen value from dividing the address space in such a
way as to prevent large allocations. This may not be an issue on all
platforms. Allow the specification of a minimum number of bits so that
platforms desiring greater ASLR protection may determine where to place
the trade-off.
Signed-off-by: Daniel Cashman <dcashman@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Nick Kralevich <nnk@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hector Marco-Gisbert <hecmargi@upv.es>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 02:19:53 +03:00
|
|
|
#ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS
|
|
|
|
extern const int mmap_rnd_bits_min;
|
|
|
|
extern const int mmap_rnd_bits_max;
|
|
|
|
extern int mmap_rnd_bits __read_mostly;
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS
|
|
|
|
extern const int mmap_rnd_compat_bits_min;
|
|
|
|
extern const int mmap_rnd_compat_bits_max;
|
|
|
|
extern int mmap_rnd_compat_bits __read_mostly;
|
|
|
|
#endif
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
#include <asm/page.h>
|
|
|
|
#include <asm/pgtable.h>
|
|
|
|
#include <asm/processor.h>
|
|
|
|
|
2013-11-13 03:07:59 +04:00
|
|
|
#ifndef __pa_symbol
|
|
|
|
#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
|
|
|
|
#endif
|
|
|
|
|
mm: replace open coded page to virt conversion with page_to_virt()
The open coded conversion from struct page address to virtual address in
lowmem_page_address() involves an intermediate conversion step to pfn
number/physical address. Since the placement of the struct page array
relative to the linear mapping may be completely independent from the
placement of physical RAM (as is that case for arm64 after commit
dfd55ad85e 'arm64: vmemmap: use virtual projection of linear region'),
the conversion to physical address and back again should factor out of
the equation, but unfortunately, the shifting and pointer arithmetic
involved prevent this from happening, and the resulting calculation
essentially subtracts the address of the start of physical memory and
adds it back again, in a way that prevents the compiler from optimizing
it away.
Since the start of physical memory is not a build time constant on arm64,
the resulting conversion involves an unnecessary memory access, which
we would like to get rid of. So replace the open coded conversion with
a call to page_to_virt(), and use the open coded conversion as its
default definition, to be overriden by the architecture, if desired.
The existing arch specific definitions of page_to_virt are all equivalent
to this default definition, so by itself this patch is a no-op.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-18 19:04:57 +03:00
|
|
|
#ifndef page_to_virt
|
|
|
|
#define page_to_virt(x) __va(PFN_PHYS(page_to_pfn(x)))
|
|
|
|
#endif
|
|
|
|
|
2017-01-11 00:35:42 +03:00
|
|
|
#ifndef lm_alias
|
|
|
|
#define lm_alias(x) __va(__pa_symbol(x))
|
|
|
|
#endif
|
|
|
|
|
2014-10-23 14:07:44 +04:00
|
|
|
/*
|
|
|
|
* To prevent common memory management code establishing
|
|
|
|
* a zero page mapping on a read fault.
|
|
|
|
* This macro should be defined within <asm/pgtable.h>.
|
|
|
|
* s390 does this to prevent multiplexing of hardware bits
|
|
|
|
* related to the physical page in case of virtualization.
|
|
|
|
*/
|
|
|
|
#ifndef mm_forbids_zeropage
|
|
|
|
#define mm_forbids_zeropage(X) (0)
|
|
|
|
#endif
|
|
|
|
|
mm: zero reserved and unavailable struct pages
Some memory is reserved but unavailable: not present in memblock.memory
(because not backed by physical pages), but present in memblock.reserved.
Such memory has backing struct pages, but they are not initialized by
going through __init_single_page().
In some cases these struct pages are accessed even if they do not
contain any data. One example is page_to_pfn() might access page->flags
if this is where section information is stored (CONFIG_SPARSEMEM,
SECTION_IN_PAGE_FLAGS).
One example of such memory: trim_low_memory_range() unconditionally
reserves from pfn 0, but e820__memblock_setup() might provide the
exiting memory from pfn 1 (i.e. KVM).
Since struct pages are zeroed in __init_single_page(), and not during
allocation time, we must zero such struct pages explicitly.
The patch involves adding a new memblock iterator:
for_each_resv_unavail_range(i, p_start, p_end)
Which iterates through reserved && !memory lists, and we zero struct pages
explicitly by calling mm_zero_struct_page().
===
Here is more detailed example of problem that this patch is addressing:
Run tested on qemu with the following arguments:
-enable-kvm -cpu kvm64 -m 512 -smp 2
This patch reports that there are 98 unavailable pages.
They are: pfn 0 and pfns in range [159, 255].
Note, trim_low_memory_range() reserves only pfns in range [0, 15], it does
not reserve [159, 255] ones.
e820__memblock_setup() reports linux that the following physical ranges are
available:
[1 , 158]
[256, 130783]
Notice, that exactly unavailable pfns are missing!
Now, lets check what we have in zone 0: [1, 131039]
pfn 0, is not part of the zone, but pfns [1, 158], are.
However, the bigger problem we have if we do not initialize these struct
pages is with memory hotplug. Because, that path operates at 2M
boundaries (section_nr). And checks if 2M range of pages is hot
removable. It starts with first pfn from zone, rounds it down to 2M
boundary (sturct pages are allocated at 2M boundaries when vmemmap is
created), and checks if that section is hot removable. In this case
start with pfn 1 and convert it down to pfn 0. Later pfn is converted
to struct page, and some fields are checked. Now, if we do not zero
struct pages, we get unpredictable results.
In fact when CONFIG_VM_DEBUG is enabled, and we explicitly set all
vmemmap memory to ones, the following panic is observed with kernel test
without this patch applied:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: is_pageblock_removable_nolock+0x35/0x90
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT
...
task: ffff88001f4e2900 task.stack: ffffc90000314000
RIP: 0010:is_pageblock_removable_nolock+0x35/0x90
Call Trace:
? is_mem_section_removable+0x5a/0xd0
show_mem_removable+0x6b/0xa0
dev_attr_show+0x1b/0x50
sysfs_kf_seq_show+0xa1/0x100
kernfs_seq_show+0x22/0x30
seq_read+0x1ac/0x3a0
kernfs_fop_read+0x36/0x190
? security_file_permission+0x90/0xb0
__vfs_read+0x16/0x30
vfs_read+0x81/0x130
SyS_read+0x44/0xa0
entry_SYSCALL_64_fastpath+0x1f/0xbd
Link: http://lkml.kernel.org/r/20171013173214.27300-7-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Tested-by: Bob Picco <bob.picco@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 04:36:31 +03:00
|
|
|
/*
|
|
|
|
* On some architectures it is expensive to call memset() for small sizes.
|
|
|
|
* Those architectures should provide their own implementation of "struct page"
|
|
|
|
* zeroing by defining this macro in <asm/pgtable.h>.
|
|
|
|
*/
|
|
|
|
#ifndef mm_zero_struct_page
|
|
|
|
#define mm_zero_struct_page(pp) ((void)memset((pp), 0, sizeof(struct page)))
|
|
|
|
#endif
|
|
|
|
|
2016-03-18 00:18:48 +03:00
|
|
|
/*
|
|
|
|
* Default maximum number of active map areas, this limits the number of vmas
|
|
|
|
* per mm struct. Users can overwrite this number by sysctl but there is a
|
|
|
|
* problem.
|
|
|
|
*
|
|
|
|
* When a program's coredump is generated as ELF format, a section is created
|
|
|
|
* per a vma. In ELF, the number of sections is represented in unsigned short.
|
|
|
|
* This means the number of sections should be smaller than 65535 at coredump.
|
|
|
|
* Because the kernel adds some informative sections to a image of program at
|
|
|
|
* generating coredump, we need some margin. The number of extra sections is
|
|
|
|
* 1-3 now and depends on arch. We use "5" as safe margin, here.
|
|
|
|
*
|
|
|
|
* ELF extended numbering allows more than 65535 sections, so 16-bit bound is
|
|
|
|
* not a hard limit any more. Although some userspace tools can be surprised by
|
|
|
|
* that.
|
|
|
|
*/
|
|
|
|
#define MAPCOUNT_ELF_CORE_MARGIN (5)
|
|
|
|
#define DEFAULT_MAX_MAP_COUNT (USHRT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
|
|
|
|
|
|
|
|
extern int sysctl_max_map_count;
|
|
|
|
|
mm: limit growth of 3% hardcoded other user reserve
Add user_reserve_kbytes knob.
Limit the growth of the memory reserved for other user processes to
min(3% current process size, user_reserve_pages). Only about 8MB is
necessary to enable recovery in the default mode, and only a few hundred
MB are required even when overcommit is disabled.
user_reserve_pages defaults to min(3% free pages, 128MB)
I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ...
then adding the RSS of each.
This only affects OVERCOMMIT_NEVER mode.
Background
1. user reserve
__vm_enough_memory reserves a hardcoded 3% of the current process size for
other applications when overcommit is disabled. This was done so that a
user could recover if they launched a memory hogging process. Without the
reserve, a user would easily run into a message such as:
bash: fork: Cannot allocate memory
2. admin reserve
Additionally, a hardcoded 3% of free memory is reserved for root in both
overcommit 'guess' and 'never' modes. This was intended to prevent a
scenario where root-cant-log-in and perform recovery operations.
Note that this reserve shrinks, and doesn't guarantee a useful reserve.
Motivation
The two hardcoded memory reserves should be updated to account for current
memory sizes.
Also, the admin reserve would be more useful if it didn't shrink too much.
When the current code was originally written, 1GB was considered
"enterprise". Now the 3% reserve can grow to multiple GB on large memory
systems, and it only needs to be a few hundred MB at most to enable a user
or admin to recover a system with an unwanted memory hogging process.
I've found that reducing these reserves is especially beneficial for a
specific type of application load:
* single application system
* one or few processes (e.g. one per core)
* allocating all available memory
* not initializing every page immediately
* long running
I've run scientific clusters with this sort of load. A long running job
sometimes failed many hours (weeks of CPU time) into a calculation. They
weren't initializing all of their memory immediately, and they weren't
using calloc, so I put systems into overcommit 'never' mode. These
clusters run diskless and have no swap.
However, with the current reserves, a user wishing to allocate as much
memory as possible to one process may be prevented from using, for
example, almost 2GB out of 32GB.
The effect is less, but still significant when a user starts a job with
one process per core. I have repeatedly seen a set of processes
requesting the same amount of memory fail because one of them could not
allocate the amount of memory a user would expect to be able to allocate.
For example, Message Passing Interfce (MPI) processes, one per core. And
it is similar for other parallel programming frameworks.
Changing this reserve code will make the overcommit never mode more useful
by allowing applications to allocate nearly all of the available memory.
Also, the new admin_reserve_kbytes will be safer than the current behavior
since the hardcoded 3% of available memory reserve can shrink to something
useless in the case where applications have grabbed all available memory.
Risks
* "bash: fork: Cannot allocate memory"
The downside of the first patch-- which creates a tunable user reserve
that is only used in overcommit 'never' mode--is that an admin can set
it so low that a user may not be able to kill their process, even if
they already have a shell prompt.
Of course, a user can get in the same predicament with the current 3%
reserve--they just have to launch processes until 3% becomes negligible.
* root-cant-log-in problem
The second patch, adding the tunable rootuser_reserve_pages, allows
the admin to shoot themselves in the foot by setting it too small. They
can easily get the system into a state where root-can't-log-in.
However, the new admin_reserve_kbytes will be safer than the current
behavior since the hardcoded 3% of available memory reserve can shrink
to something useless in the case where applications have grabbed all
available memory.
Alternatives
* Memory cgroups provide a more flexible way to limit application memory.
Not everyone wants to set up cgroups or deal with their overhead.
* We could create a fourth overcommit mode which provides smaller reserves.
The size of useful reserves may be drastically different depending
on the whether the system is embedded or enterprise.
* Force users to initialize all of their memory or use calloc.
Some users don't want/expect the system to overcommit when they malloc.
Overcommit 'never' mode is for this scenario, and it should work well.
The new user and admin reserve tunables are simple to use, with low
overhead compared to cgroups. The patches preserve current behavior where
3% of memory is less than 128MB, except that the admin reserve doesn't
shrink to an unusable size under pressure. The code allows admins to tune
for embedded and enterprise usage.
FAQ
* How is the root-cant-login problem addressed?
What happens if admin_reserve_pages is set to 0?
Root is free to shoot themselves in the foot by setting
admin_reserve_kbytes too low.
On x86_64, the minimum useful reserve is:
8MB for overcommit 'guess'
128MB for overcommit 'never'
admin_reserve_pages defaults to min(3% free memory, 8MB)
So, anyone switching to 'never' mode needs to adjust
admin_reserve_pages.
* How do you calculate a minimum useful reserve?
A user or the admin needs enough memory to login and perform
recovery operations, which includes, at a minimum:
sshd or login + bash (or some other shell) + top (or ps, kill, etc.)
For overcommit 'guess', we can sum resident set sizes (RSS)
because we only need enough memory to handle what the recovery
programs will typically use. On x86_64 this is about 8MB.
For overcommit 'never', we can take the max of their virtual sizes (VSZ)
and add the sum of their RSS. We use VSZ instead of RSS because mode
forces us to ensure we can fulfill all of the requested memory allocations--
even if the programs only use a fraction of what they ask for.
On x86_64 this is about 128MB.
When swap is enabled, reserves are useful even when they are as
small as 10MB, regardless of overcommit mode.
When both swap and overcommit are disabled, then the admin should
tune the reserves higher to be absolutley safe. Over 230MB each
was safest in my testing.
* What happens if user_reserve_pages is set to 0?
Note, this only affects overcomitt 'never' mode.
Then a user will be able to allocate all available memory minus
admin_reserve_kbytes.
However, they will easily see a message such as:
"bash: fork: Cannot allocate memory"
And they won't be able to recover/kill their application.
The admin should be able to recover the system if
admin_reserve_kbytes is set appropriately.
* What's the difference between overcommit 'guess' and 'never'?
"Guess" allows an allocation if there are enough free + reclaimable
pages. It has a hardcoded 3% of free pages reserved for root.
"Never" allows an allocation if there is enough swap + a configurable
percentage (default is 50) of physical RAM. It has a hardcoded 3% of
free pages reserved for root, like "Guess" mode. It also has a
hardcoded 3% of the current process size reserved for additional
applications.
* Why is overcommit 'guess' not suitable even when an app eventually
writes to every page? It takes free pages, file pages, available
swap pages, reclaimable slab pages into consideration. In other words,
these are all pages available, then why isn't overcommit suitable?
Because it only looks at the present state of the system. It
does not take into account the memory that other applications have
malloced, but haven't initialized yet. It overcommits the system.
Test Summary
There was little change in behavior in the default overcommit 'guess'
mode with swap enabled before and after the patch. This was expected.
Systems run most predictably (i.e. no oom kills) in overcommit 'never'
mode with swap enabled. This also allowed the most memory to be allocated
to a user application.
Overcommit 'guess' mode without swap is a bad idea. It is easy to
crash the system. None of the other tested combinations crashed.
This matches my experience on the Roadrunner supercomputer.
Without the tunable user reserve, a system in overcommit 'never' mode
and without swap does not allow the admin to recover, although the
admin can.
With the new tunable reserves, a system in overcommit 'never' mode
and without swap can be configured to:
1. maximize user-allocatable memory, running close to the edge of
recoverability
2. maximize recoverability, sacrificing allocatable memory to
ensure that a user cannot take down a system
Test Description
Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap
System is booted into multiuser console mode, with unnecessary services
turned off. Caches were dropped before each test.
Hogs are user memtester processes that attempt to allocate all free memory
as reported by /proc/meminfo
In overcommit 'never' mode, memory_ratio=100
Test Results
3.9.0-rc1-mm1
Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
---------- ---- ---- ------------- ---- ------------- --------------
guess yes 1 5432/5432 no yes yes
guess yes 4 5444/5444 1 yes yes
guess no 1 5302/5449 no yes yes
guess no 4 - crash no no
never yes 1 5460/5460 1 yes yes
never yes 4 5460/5460 1 yes yes
never no 1 5218/5432 no no yes
never no 4 5203/5448 no no yes
3.9.0-rc1-mm1-tunablereserves
User and Admin Recovery show their respective reserves, if applicable.
Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
---------- ---- ---- ------------- ---- ------------- --------------
guess yes 1 5419/5419 no - yes 8MB yes
guess yes 4 5436/5436 1 - yes 8MB yes
guess no 1 5440/5440 * - yes 8MB yes
guess no 4 - crash - no 8MB no
* process would successfully mlock, then the oom killer would pick it
never yes 1 5446/5446 no 10MB yes 20MB yes
never yes 4 5456/5456 no 10MB yes 20MB yes
never no 1 5387/5429 no 128MB no 8MB barely
never no 1 5323/5428 no 226MB barely 8MB barely
never no 1 5323/5428 no 226MB barely 8MB barely
never no 1 5359/5448 no 10MB no 10MB barely
never no 1 5323/5428 no 0MB no 10MB barely
never no 1 5332/5428 no 0MB no 50MB yes
never no 1 5293/5429 no 0MB no 90MB yes
never no 1 5001/5427 no 230MB yes 338MB yes
never no 4* 4998/5424 no 230MB yes 338MB yes
* more memtesters were launched, able to allocate approximately another 100MB
Future Work
- Test larger memory systems.
- Test an embedded image.
- Test other architectures.
- Time malloc microbenchmarks.
- Would it be useful to be able to set overcommit policy for
each memory cgroup?
- Some lines are slightly above 80 chars.
Perhaps define a macro to convert between pages and kb?
Other places in the kernel do this.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_user_reserve() static]
Signed-off-by: Andrew Shewmaker <agshew@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 02:08:10 +04:00
|
|
|
extern unsigned long sysctl_user_reserve_kbytes;
|
2013-04-30 02:08:11 +04:00
|
|
|
extern unsigned long sysctl_admin_reserve_kbytes;
|
mm: limit growth of 3% hardcoded other user reserve
Add user_reserve_kbytes knob.
Limit the growth of the memory reserved for other user processes to
min(3% current process size, user_reserve_pages). Only about 8MB is
necessary to enable recovery in the default mode, and only a few hundred
MB are required even when overcommit is disabled.
user_reserve_pages defaults to min(3% free pages, 128MB)
I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ...
then adding the RSS of each.
This only affects OVERCOMMIT_NEVER mode.
Background
1. user reserve
__vm_enough_memory reserves a hardcoded 3% of the current process size for
other applications when overcommit is disabled. This was done so that a
user could recover if they launched a memory hogging process. Without the
reserve, a user would easily run into a message such as:
bash: fork: Cannot allocate memory
2. admin reserve
Additionally, a hardcoded 3% of free memory is reserved for root in both
overcommit 'guess' and 'never' modes. This was intended to prevent a
scenario where root-cant-log-in and perform recovery operations.
Note that this reserve shrinks, and doesn't guarantee a useful reserve.
Motivation
The two hardcoded memory reserves should be updated to account for current
memory sizes.
Also, the admin reserve would be more useful if it didn't shrink too much.
When the current code was originally written, 1GB was considered
"enterprise". Now the 3% reserve can grow to multiple GB on large memory
systems, and it only needs to be a few hundred MB at most to enable a user
or admin to recover a system with an unwanted memory hogging process.
I've found that reducing these reserves is especially beneficial for a
specific type of application load:
* single application system
* one or few processes (e.g. one per core)
* allocating all available memory
* not initializing every page immediately
* long running
I've run scientific clusters with this sort of load. A long running job
sometimes failed many hours (weeks of CPU time) into a calculation. They
weren't initializing all of their memory immediately, and they weren't
using calloc, so I put systems into overcommit 'never' mode. These
clusters run diskless and have no swap.
However, with the current reserves, a user wishing to allocate as much
memory as possible to one process may be prevented from using, for
example, almost 2GB out of 32GB.
The effect is less, but still significant when a user starts a job with
one process per core. I have repeatedly seen a set of processes
requesting the same amount of memory fail because one of them could not
allocate the amount of memory a user would expect to be able to allocate.
For example, Message Passing Interfce (MPI) processes, one per core. And
it is similar for other parallel programming frameworks.
Changing this reserve code will make the overcommit never mode more useful
by allowing applications to allocate nearly all of the available memory.
Also, the new admin_reserve_kbytes will be safer than the current behavior
since the hardcoded 3% of available memory reserve can shrink to something
useless in the case where applications have grabbed all available memory.
Risks
* "bash: fork: Cannot allocate memory"
The downside of the first patch-- which creates a tunable user reserve
that is only used in overcommit 'never' mode--is that an admin can set
it so low that a user may not be able to kill their process, even if
they already have a shell prompt.
Of course, a user can get in the same predicament with the current 3%
reserve--they just have to launch processes until 3% becomes negligible.
* root-cant-log-in problem
The second patch, adding the tunable rootuser_reserve_pages, allows
the admin to shoot themselves in the foot by setting it too small. They
can easily get the system into a state where root-can't-log-in.
However, the new admin_reserve_kbytes will be safer than the current
behavior since the hardcoded 3% of available memory reserve can shrink
to something useless in the case where applications have grabbed all
available memory.
Alternatives
* Memory cgroups provide a more flexible way to limit application memory.
Not everyone wants to set up cgroups or deal with their overhead.
* We could create a fourth overcommit mode which provides smaller reserves.
The size of useful reserves may be drastically different depending
on the whether the system is embedded or enterprise.
* Force users to initialize all of their memory or use calloc.
Some users don't want/expect the system to overcommit when they malloc.
Overcommit 'never' mode is for this scenario, and it should work well.
The new user and admin reserve tunables are simple to use, with low
overhead compared to cgroups. The patches preserve current behavior where
3% of memory is less than 128MB, except that the admin reserve doesn't
shrink to an unusable size under pressure. The code allows admins to tune
for embedded and enterprise usage.
FAQ
* How is the root-cant-login problem addressed?
What happens if admin_reserve_pages is set to 0?
Root is free to shoot themselves in the foot by setting
admin_reserve_kbytes too low.
On x86_64, the minimum useful reserve is:
8MB for overcommit 'guess'
128MB for overcommit 'never'
admin_reserve_pages defaults to min(3% free memory, 8MB)
So, anyone switching to 'never' mode needs to adjust
admin_reserve_pages.
* How do you calculate a minimum useful reserve?
A user or the admin needs enough memory to login and perform
recovery operations, which includes, at a minimum:
sshd or login + bash (or some other shell) + top (or ps, kill, etc.)
For overcommit 'guess', we can sum resident set sizes (RSS)
because we only need enough memory to handle what the recovery
programs will typically use. On x86_64 this is about 8MB.
For overcommit 'never', we can take the max of their virtual sizes (VSZ)
and add the sum of their RSS. We use VSZ instead of RSS because mode
forces us to ensure we can fulfill all of the requested memory allocations--
even if the programs only use a fraction of what they ask for.
On x86_64 this is about 128MB.
When swap is enabled, reserves are useful even when they are as
small as 10MB, regardless of overcommit mode.
When both swap and overcommit are disabled, then the admin should
tune the reserves higher to be absolutley safe. Over 230MB each
was safest in my testing.
* What happens if user_reserve_pages is set to 0?
Note, this only affects overcomitt 'never' mode.
Then a user will be able to allocate all available memory minus
admin_reserve_kbytes.
However, they will easily see a message such as:
"bash: fork: Cannot allocate memory"
And they won't be able to recover/kill their application.
The admin should be able to recover the system if
admin_reserve_kbytes is set appropriately.
* What's the difference between overcommit 'guess' and 'never'?
"Guess" allows an allocation if there are enough free + reclaimable
pages. It has a hardcoded 3% of free pages reserved for root.
"Never" allows an allocation if there is enough swap + a configurable
percentage (default is 50) of physical RAM. It has a hardcoded 3% of
free pages reserved for root, like "Guess" mode. It also has a
hardcoded 3% of the current process size reserved for additional
applications.
* Why is overcommit 'guess' not suitable even when an app eventually
writes to every page? It takes free pages, file pages, available
swap pages, reclaimable slab pages into consideration. In other words,
these are all pages available, then why isn't overcommit suitable?
Because it only looks at the present state of the system. It
does not take into account the memory that other applications have
malloced, but haven't initialized yet. It overcommits the system.
Test Summary
There was little change in behavior in the default overcommit 'guess'
mode with swap enabled before and after the patch. This was expected.
Systems run most predictably (i.e. no oom kills) in overcommit 'never'
mode with swap enabled. This also allowed the most memory to be allocated
to a user application.
Overcommit 'guess' mode without swap is a bad idea. It is easy to
crash the system. None of the other tested combinations crashed.
This matches my experience on the Roadrunner supercomputer.
Without the tunable user reserve, a system in overcommit 'never' mode
and without swap does not allow the admin to recover, although the
admin can.
With the new tunable reserves, a system in overcommit 'never' mode
and without swap can be configured to:
1. maximize user-allocatable memory, running close to the edge of
recoverability
2. maximize recoverability, sacrificing allocatable memory to
ensure that a user cannot take down a system
Test Description
Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap
System is booted into multiuser console mode, with unnecessary services
turned off. Caches were dropped before each test.
Hogs are user memtester processes that attempt to allocate all free memory
as reported by /proc/meminfo
In overcommit 'never' mode, memory_ratio=100
Test Results
3.9.0-rc1-mm1
Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
---------- ---- ---- ------------- ---- ------------- --------------
guess yes 1 5432/5432 no yes yes
guess yes 4 5444/5444 1 yes yes
guess no 1 5302/5449 no yes yes
guess no 4 - crash no no
never yes 1 5460/5460 1 yes yes
never yes 4 5460/5460 1 yes yes
never no 1 5218/5432 no no yes
never no 4 5203/5448 no no yes
3.9.0-rc1-mm1-tunablereserves
User and Admin Recovery show their respective reserves, if applicable.
Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
---------- ---- ---- ------------- ---- ------------- --------------
guess yes 1 5419/5419 no - yes 8MB yes
guess yes 4 5436/5436 1 - yes 8MB yes
guess no 1 5440/5440 * - yes 8MB yes
guess no 4 - crash - no 8MB no
* process would successfully mlock, then the oom killer would pick it
never yes 1 5446/5446 no 10MB yes 20MB yes
never yes 4 5456/5456 no 10MB yes 20MB yes
never no 1 5387/5429 no 128MB no 8MB barely
never no 1 5323/5428 no 226MB barely 8MB barely
never no 1 5323/5428 no 226MB barely 8MB barely
never no 1 5359/5448 no 10MB no 10MB barely
never no 1 5323/5428 no 0MB no 10MB barely
never no 1 5332/5428 no 0MB no 50MB yes
never no 1 5293/5429 no 0MB no 90MB yes
never no 1 5001/5427 no 230MB yes 338MB yes
never no 4* 4998/5424 no 230MB yes 338MB yes
* more memtesters were launched, able to allocate approximately another 100MB
Future Work
- Test larger memory systems.
- Test an embedded image.
- Test other architectures.
- Time malloc microbenchmarks.
- Would it be useful to be able to set overcommit policy for
each memory cgroup?
- Some lines are slightly above 80 chars.
Perhaps define a macro to convert between pages and kb?
Other places in the kernel do this.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_user_reserve() static]
Signed-off-by: Andrew Shewmaker <agshew@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 02:08:10 +04:00
|
|
|
|
2014-01-22 03:49:14 +04:00
|
|
|
extern int sysctl_overcommit_memory;
|
|
|
|
extern int sysctl_overcommit_ratio;
|
|
|
|
extern unsigned long sysctl_overcommit_kbytes;
|
|
|
|
|
|
|
|
extern int overcommit_ratio_handler(struct ctl_table *, int, void __user *,
|
|
|
|
size_t *, loff_t *);
|
|
|
|
extern int overcommit_kbytes_handler(struct ctl_table *, int, void __user *,
|
|
|
|
size_t *, loff_t *);
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
#define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n))
|
|
|
|
|
2008-07-24 08:28:13 +04:00
|
|
|
/* to align the pointer to the (next) page boundary */
|
|
|
|
#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
|
|
|
|
|
2013-07-04 02:02:11 +04:00
|
|
|
/* test whether an address (unsigned long or pointer) is aligned to PAGE_SIZE */
|
2016-10-08 03:02:04 +03:00
|
|
|
#define PAGE_ALIGNED(addr) IS_ALIGNED((unsigned long)(addr), PAGE_SIZE)
|
2013-07-04 02:02:11 +04:00
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
* Linux kernel virtual memory manager primitives.
|
|
|
|
* The idea being to have a "virtual" mm in the same way
|
|
|
|
* we have a virtual fs - giving a cleaner interface to the
|
|
|
|
* mm details, and allowing different kinds of memory mappings
|
|
|
|
* (from shared memory to executable loading to arbitrary
|
|
|
|
* mmap() functions).
|
|
|
|
*/
|
|
|
|
|
2006-12-07 07:32:48 +03:00
|
|
|
extern struct kmem_cache *vm_area_cachep;
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
#ifndef CONFIG_MMU
|
2009-01-08 15:04:47 +03:00
|
|
|
extern struct rb_root nommu_region_tree;
|
|
|
|
extern struct rw_semaphore nommu_region_sem;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
extern unsigned int kobjsize(const void *objp);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
2008-08-16 14:07:21 +04:00
|
|
|
* vm_flags in vm_area_struct, see mm_types.h.
|
2016-03-18 00:18:53 +03:00
|
|
|
* When changing, update also include/trace/events/mmflags.h
|
2005-04-17 02:20:36 +04:00
|
|
|
*/
|
2012-10-09 03:28:37 +04:00
|
|
|
#define VM_NONE 0x00000000
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
#define VM_READ 0x00000001 /* currently active flags */
|
|
|
|
#define VM_WRITE 0x00000002
|
|
|
|
#define VM_EXEC 0x00000004
|
|
|
|
#define VM_SHARED 0x00000008
|
|
|
|
|
2005-09-21 20:55:39 +04:00
|
|
|
/* mprotect() hardcodes VM_MAYREAD >> 4 == VM_READ, and so for r/w/x bits. */
|
2005-04-17 02:20:36 +04:00
|
|
|
#define VM_MAYREAD 0x00000010 /* limits for mprotect() etc */
|
|
|
|
#define VM_MAYWRITE 0x00000020
|
|
|
|
#define VM_MAYEXEC 0x00000040
|
|
|
|
#define VM_MAYSHARE 0x00000080
|
|
|
|
|
|
|
|
#define VM_GROWSDOWN 0x00000100 /* general info on the segment */
|
2015-09-05 01:46:17 +03:00
|
|
|
#define VM_UFFD_MISSING 0x00000200 /* missing pages tracking */
|
2005-11-29 01:34:23 +03:00
|
|
|
#define VM_PFNMAP 0x00000400 /* Page-ranges managed without "struct page", just pure PFN */
|
2005-04-17 02:20:36 +04:00
|
|
|
#define VM_DENYWRITE 0x00000800 /* ETXTBSY on write attempts.. */
|
2015-09-05 01:46:17 +03:00
|
|
|
#define VM_UFFD_WP 0x00001000 /* wrprotect pages tracking */
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
#define VM_LOCKED 0x00002000
|
|
|
|
#define VM_IO 0x00004000 /* Memory mapped I/O or similar */
|
|
|
|
|
|
|
|
/* Used by sys_madvise() */
|
|
|
|
#define VM_SEQ_READ 0x00008000 /* App will access data sequentially */
|
|
|
|
#define VM_RAND_READ 0x00010000 /* App will not benefit from clustered reads */
|
|
|
|
|
|
|
|
#define VM_DONTCOPY 0x00020000 /* Do not copy this vma on fork */
|
|
|
|
#define VM_DONTEXPAND 0x00040000 /* Cannot expand with mremap() */
|
2015-11-06 05:51:36 +03:00
|
|
|
#define VM_LOCKONFAULT 0x00080000 /* Lock the pages covered when they are faulted in */
|
2005-04-17 02:20:36 +04:00
|
|
|
#define VM_ACCOUNT 0x00100000 /* Is a VM accounted object */
|
2008-07-24 08:27:28 +04:00
|
|
|
#define VM_NORESERVE 0x00200000 /* should the VM suppress accounting */
|
2005-04-17 02:20:36 +04:00
|
|
|
#define VM_HUGETLB 0x00400000 /* Huge TLB Page VM */
|
2017-11-01 18:36:41 +03:00
|
|
|
#define VM_SYNC 0x00800000 /* Synchronous page faults */
|
2012-10-09 03:28:37 +04:00
|
|
|
#define VM_ARCH_1 0x01000000 /* Architecture-specific flag */
|
mm,fork: introduce MADV_WIPEONFORK
Introduce MADV_WIPEONFORK semantics, which result in a VMA being empty
in the child process after fork. This differs from MADV_DONTFORK in one
important way.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
MADV_WIPEONFORK only works on private, anonymous VMAs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patch also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
[akpm@linux-foundation.org: numerically order arch/parisc/include/uapi/asm/mman.h #defines]
Link: http://lkml.kernel.org/r/20170811212829.29186-3-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: Colm MacCártaigh <colm@allcosts.net>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:25:15 +03:00
|
|
|
#define VM_WIPEONFORK 0x02000000 /* Wipe VMA contents in child. */
|
2012-10-09 03:28:59 +04:00
|
|
|
#define VM_DONTDUMP 0x04000000 /* Do not include in the core dump */
|
mm: fix fault vs invalidate race for linear mappings
Fix the race between invalidate_inode_pages and do_no_page.
Andrea Arcangeli identified a subtle race between invalidation of pages from
pagecache with userspace mappings, and do_no_page.
The issue is that invalidation has to shoot down all mappings to the page,
before it can be discarded from the pagecache. Between shooting down ptes to
a particular page, and actually dropping the struct page from the pagecache,
do_no_page from any process might fault on that page and establish a new
mapping to the page just before it gets discarded from the pagecache.
The most common case where such invalidation is used is in file truncation.
This case was catered for by doing a sort of open-coded seqlock between the
file's i_size, and its truncate_count.
Truncation will decrease i_size, then increment truncate_count before
unmapping userspace pages; do_no_page will read truncate_count, then find the
page if it is within i_size, and then check truncate_count under the page
table lock and back out and retry if it had subsequently been changed (ptl
will serialise against unmapping, and ensure a potentially updated
truncate_count is actually visible).
Complexity and documentation issues aside, the locking protocol fails in the
case where we would like to invalidate pagecache inside i_size. do_no_page
can come in anytime and filemap_nopage is not aware of the invalidation in
progress (as it is when it is outside i_size). The end result is that
dangling (->mapping == NULL) pages that appear to be from a particular file
may be mapped into userspace with nonsense data. Valid mappings to the same
place will see a different page.
Andrea implemented two working fixes, one using a real seqlock, another using
a page->flags bit. He also proposed using the page lock in do_no_page, but
that was initially considered too heavyweight. However, it is not a global or
per-file lock, and the page cacheline is modified in do_no_page to increment
_count and _mapcount anyway, so a further modification should not be a large
performance hit. Scalability is not an issue.
This patch implements this latter approach. ->nopage implementations return
with the page locked if it is possible for their underlying file to be
invalidated (in that case, they must set a special vm_flags bit to indicate
so). do_no_page only unlocks the page after setting up the mapping
completely. invalidation is excluded because it holds the page lock during
invalidation of each page (and ensures that the page is not mapped while
holding the lock).
This also allows significant simplifications in do_no_page, because we have
the page locked in the right place in the pagecache from the start.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 12:46:57 +04:00
|
|
|
|
2013-09-12 01:22:24 +04:00
|
|
|
#ifdef CONFIG_MEM_SOFT_DIRTY
|
|
|
|
# define VM_SOFTDIRTY 0x08000000 /* Not soft dirty clean area */
|
|
|
|
#else
|
|
|
|
# define VM_SOFTDIRTY 0
|
|
|
|
#endif
|
|
|
|
|
mm: introduce VM_MIXEDMAP
This series introduces some important infrastructure work. The overall result
is that:
1. We now support XIP backed filesystems using memory that have no
struct page allocated to them. And patches 6 and 7 actually implement
this for s390.
This is pretty important in a number of cases. As far as I understand,
in the case of virtualisation (eg. s390), each guest may mount a
readonly copy of the same filesystem (eg. the distro). Currently,
guests need to allocate struct pages for this image. So if you have
100 guests, you already need to allocate more memory for the struct
pages than the size of the image. I think. (Carsten?)
For other (eg. embedded) systems, you may have a very large non-
volatile filesystem. If you have to have struct pages for this, then
your RAM consumption will go up proportionally to fs size. Even
though it is just a small proportion, the RAM can be much more costly
eg in terms of power, so every KB less that Linux uses makes it more
attractive to a lot of these guys.
2. VM_MIXEDMAP allows us to support mappings where you actually do want
to refcount _some_ pages in the mapping, but not others, and support
COW on arbitrary (non-linear) mappings. Jared needs this for his NVRAM
filesystem in progress. Future iterations of this filesystem will
most likely want to migrate pages between pagecache and XIP backing,
which is where the requirement for mixed (some refcounted, some not)
comes from.
3. pte_special also has a peripheral usage that I need for my lockless
get_user_pages patch. That was shown to speed up "oltp" on db2 by
10% on a 2 socket system, which is kind of significant because they
scrounge for months to try to find 0.1% improvement on these
workloads. I'm hoping we might finally be faster than AIX on
pSeries with this :). My reference to lockless get_user_pages is not
meant to justify this patchset (which doesn't include lockless gup),
but just to show that pte_special is not some s390 specific thing that
should be hidden in arch code or xip code: I definitely want to use it
on at least x86 and powerpc as well.
This patch:
Introduce a new type of mapping, VM_MIXEDMAP. This is unlike VM_PFNMAP in
that it can support COW mappings of arbitrary ranges including ranges without
struct page *and* ranges with a struct page that we actually want to refcount
(PFNMAP can only support COW in those cases where the un-COW-ed translations
are mapped linearly in the virtual address, and can only support non
refcounted ranges).
VM_MIXEDMAP achieves this by refcounting all pfn_valid pages, and not
refcounting !pfn_valid pages (which is not an option for VM_PFNMAP, because it
needs to avoid refcounting pfn_valid pages eg. for /dev/mem mappings).
Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:12:58 +04:00
|
|
|
#define VM_MIXEDMAP 0x10000000 /* Can contain "struct page" and pure PFN pages */
|
2012-10-09 03:28:37 +04:00
|
|
|
#define VM_HUGEPAGE 0x20000000 /* MADV_HUGEPAGE marked this vma */
|
|
|
|
#define VM_NOHUGEPAGE 0x40000000 /* MADV_NOHUGEPAGE marked this vma */
|
2009-09-22 04:01:57 +04:00
|
|
|
#define VM_MERGEABLE 0x80000000 /* KSM may merge identical pages */
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2016-02-13 00:02:08 +03:00
|
|
|
#ifdef CONFIG_ARCH_USES_HIGH_VMA_FLAGS
|
|
|
|
#define VM_HIGH_ARCH_BIT_0 32 /* bit only usable on 64-bit architectures */
|
|
|
|
#define VM_HIGH_ARCH_BIT_1 33 /* bit only usable on 64-bit architectures */
|
|
|
|
#define VM_HIGH_ARCH_BIT_2 34 /* bit only usable on 64-bit architectures */
|
|
|
|
#define VM_HIGH_ARCH_BIT_3 35 /* bit only usable on 64-bit architectures */
|
x86,mpx: make mpx depend on x86-64 to free up VMA flag
Patch series "mm,fork,security: introduce MADV_WIPEONFORK", v4.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patchset also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
This patch (of 2):
MPX only seems to be available on 64 bit CPUs, starting with Skylake and
Goldmont. Move VM_MPX into the 64 bit only portion of vma->vm_flags, in
order to free up a VMA flag.
Link: http://lkml.kernel.org/r/20170811212829.29186-2-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Colm MacCártaigh <colm@allcosts.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:25:11 +03:00
|
|
|
#define VM_HIGH_ARCH_BIT_4 36 /* bit only usable on 64-bit architectures */
|
2016-02-13 00:02:08 +03:00
|
|
|
#define VM_HIGH_ARCH_0 BIT(VM_HIGH_ARCH_BIT_0)
|
|
|
|
#define VM_HIGH_ARCH_1 BIT(VM_HIGH_ARCH_BIT_1)
|
|
|
|
#define VM_HIGH_ARCH_2 BIT(VM_HIGH_ARCH_BIT_2)
|
|
|
|
#define VM_HIGH_ARCH_3 BIT(VM_HIGH_ARCH_BIT_3)
|
x86,mpx: make mpx depend on x86-64 to free up VMA flag
Patch series "mm,fork,security: introduce MADV_WIPEONFORK", v4.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patchset also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
This patch (of 2):
MPX only seems to be available on 64 bit CPUs, starting with Skylake and
Goldmont. Move VM_MPX into the 64 bit only portion of vma->vm_flags, in
order to free up a VMA flag.
Link: http://lkml.kernel.org/r/20170811212829.29186-2-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Colm MacCártaigh <colm@allcosts.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:25:11 +03:00
|
|
|
#define VM_HIGH_ARCH_4 BIT(VM_HIGH_ARCH_BIT_4)
|
2016-02-13 00:02:08 +03:00
|
|
|
#endif /* CONFIG_ARCH_USES_HIGH_VMA_FLAGS */
|
|
|
|
|
2012-10-09 03:28:37 +04:00
|
|
|
#if defined(CONFIG_X86)
|
|
|
|
# define VM_PAT VM_ARCH_1 /* PAT reserves whole VMA at once (x86) */
|
2016-02-13 00:02:10 +03:00
|
|
|
#if defined (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS)
|
|
|
|
# define VM_PKEY_SHIFT VM_HIGH_ARCH_BIT_0
|
|
|
|
# define VM_PKEY_BIT0 VM_HIGH_ARCH_0 /* A protection key is a 4-bit value */
|
|
|
|
# define VM_PKEY_BIT1 VM_HIGH_ARCH_1
|
|
|
|
# define VM_PKEY_BIT2 VM_HIGH_ARCH_2
|
|
|
|
# define VM_PKEY_BIT3 VM_HIGH_ARCH_3
|
|
|
|
#endif
|
2012-10-09 03:28:37 +04:00
|
|
|
#elif defined(CONFIG_PPC)
|
|
|
|
# define VM_SAO VM_ARCH_1 /* Strong Access Ordering (powerpc) */
|
|
|
|
#elif defined(CONFIG_PARISC)
|
|
|
|
# define VM_GROWSUP VM_ARCH_1
|
2012-10-16 13:16:14 +04:00
|
|
|
#elif defined(CONFIG_METAG)
|
|
|
|
# define VM_GROWSUP VM_ARCH_1
|
2012-10-09 03:28:37 +04:00
|
|
|
#elif defined(CONFIG_IA64)
|
|
|
|
# define VM_GROWSUP VM_ARCH_1
|
|
|
|
#elif !defined(CONFIG_MMU)
|
|
|
|
# define VM_MAPPED_COPY VM_ARCH_1 /* T if mapped copy of data (nommu mmap) */
|
|
|
|
#endif
|
|
|
|
|
x86,mpx: make mpx depend on x86-64 to free up VMA flag
Patch series "mm,fork,security: introduce MADV_WIPEONFORK", v4.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patchset also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
This patch (of 2):
MPX only seems to be available on 64 bit CPUs, starting with Skylake and
Goldmont. Move VM_MPX into the 64 bit only portion of vma->vm_flags, in
order to free up a VMA flag.
Link: http://lkml.kernel.org/r/20170811212829.29186-2-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Colm MacCártaigh <colm@allcosts.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:25:11 +03:00
|
|
|
#if defined(CONFIG_X86_INTEL_MPX)
|
x86, mpx: Introduce VM_MPX to indicate that a VMA is MPX specific
MPX-enabled applications using large swaths of memory can
potentially have large numbers of bounds tables in process
address space to save bounds information. These tables can take
up huge swaths of memory (as much as 80% of the memory on the
system) even if we clean them up aggressively. In the worst-case
scenario, the tables can be 4x the size of the data structure
being tracked. IOW, a 1-page structure can require 4 bounds-table
pages.
Being this huge, our expectation is that folks using MPX are
going to be keen on figuring out how much memory is being
dedicated to it. So we need a way to track memory use for MPX.
If we want to specifically track MPX VMAs we need to be able to
distinguish them from normal VMAs, and keep them from getting
merged with normal VMAs. A new VM_ flag set only on MPX VMAs does
both of those things. With this flag, MPX bounds-table VMAs can
be distinguished from other VMAs, and userspace can also walk
/proc/$pid/smaps to get memory usage for MPX.
In addition to this flag, we also introduce a special ->vm_ops
specific to MPX VMAs (see the patch "add MPX specific mmap
interface"), but currently different ->vm_ops do not by
themselves prevent VMA merging, so we still need this flag.
We understand that VM_ flags are scarce and are open to other
options.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: linux-mips@linux-mips.org
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20141114151825.565625B3@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:18:25 +03:00
|
|
|
/* MPX specific bounds table or bounds directory */
|
2017-10-04 02:14:24 +03:00
|
|
|
# define VM_MPX VM_HIGH_ARCH_4
|
x86,mpx: make mpx depend on x86-64 to free up VMA flag
Patch series "mm,fork,security: introduce MADV_WIPEONFORK", v4.
If a child process accesses memory that was MADV_WIPEONFORK, it will get
zeroes. The address ranges are still valid, they are just empty.
If a child process accesses memory that was MADV_DONTFORK, it will get a
segmentation fault, since those address ranges are no longer valid in
the child after fork.
Since MADV_DONTFORK also seems to be used to allow very large programs
to fork in systems with strict memory overcommit restrictions, changing
the semantics of MADV_DONTFORK might break existing programs.
The use case is libraries that store or cache information, and want to
know that they need to regenerate it in the child process after fork.
Examples of this would be:
- systemd/pulseaudio API checks (fail after fork) (replacing a getpid
check, which is too slow without a PID cache)
- PKCS#11 API reinitialization check (mandated by specification)
- glibc's upcoming PRNG (reseed after fork)
- OpenSSL PRNG (reseed after fork)
The security benefits of a forking server having a re-inialized PRNG in
every child process are pretty obvious. However, due to libraries
having all kinds of internal state, and programs getting compiled with
many different versions of each library, it is unreasonable to expect
calling programs to re-initialize everything manually after fork.
A further complication is the proliferation of clone flags, programs
bypassing glibc's functions to call clone directly, and programs calling
unshare, causing the glibc pthread_atfork hook to not get called.
It would be better to have the kernel take care of this automatically.
The patchset also adds MADV_KEEPONFORK, to undo the effects of a prior
MADV_WIPEONFORK.
This is similar to the OpenBSD minherit syscall with MAP_INHERIT_ZERO:
https://man.openbsd.org/minherit.2
This patch (of 2):
MPX only seems to be available on 64 bit CPUs, starting with Skylake and
Goldmont. Move VM_MPX into the 64 bit only portion of vma->vm_flags, in
order to free up a VMA flag.
Link: http://lkml.kernel.org/r/20170811212829.29186-2-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Colm MacCártaigh <colm@allcosts.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:25:11 +03:00
|
|
|
#else
|
|
|
|
# define VM_MPX VM_NONE
|
x86, mpx: Introduce VM_MPX to indicate that a VMA is MPX specific
MPX-enabled applications using large swaths of memory can
potentially have large numbers of bounds tables in process
address space to save bounds information. These tables can take
up huge swaths of memory (as much as 80% of the memory on the
system) even if we clean them up aggressively. In the worst-case
scenario, the tables can be 4x the size of the data structure
being tracked. IOW, a 1-page structure can require 4 bounds-table
pages.
Being this huge, our expectation is that folks using MPX are
going to be keen on figuring out how much memory is being
dedicated to it. So we need a way to track memory use for MPX.
If we want to specifically track MPX VMAs we need to be able to
distinguish them from normal VMAs, and keep them from getting
merged with normal VMAs. A new VM_ flag set only on MPX VMAs does
both of those things. With this flag, MPX bounds-table VMAs can
be distinguished from other VMAs, and userspace can also walk
/proc/$pid/smaps to get memory usage for MPX.
In addition to this flag, we also introduce a special ->vm_ops
specific to MPX VMAs (see the patch "add MPX specific mmap
interface"), but currently different ->vm_ops do not by
themselves prevent VMA merging, so we still need this flag.
We understand that VM_ flags are scarce and are open to other
options.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: linux-mips@linux-mips.org
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20141114151825.565625B3@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:18:25 +03:00
|
|
|
#endif
|
|
|
|
|
2012-10-09 03:28:37 +04:00
|
|
|
#ifndef VM_GROWSUP
|
|
|
|
# define VM_GROWSUP VM_NONE
|
|
|
|
#endif
|
|
|
|
|
2010-05-25 01:32:24 +04:00
|
|
|
/* Bits set in the VMA until the stack is in its final location */
|
|
|
|
#define VM_STACK_INCOMPLETE_SETUP (VM_RAND_READ | VM_SEQ_READ)
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
#ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */
|
|
|
|
#define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_STACK_GROWSUP
|
2016-02-03 03:57:46 +03:00
|
|
|
#define VM_STACK VM_GROWSUP
|
2005-04-17 02:20:36 +04:00
|
|
|
#else
|
2016-02-03 03:57:46 +03:00
|
|
|
#define VM_STACK VM_GROWSDOWN
|
2005-04-17 02:20:36 +04:00
|
|
|
#endif
|
|
|
|
|
2016-02-03 03:57:46 +03:00
|
|
|
#define VM_STACK_FLAGS (VM_STACK | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
|
|
|
|
|
mlock: mlocked pages are unevictable
Make sure that mlocked pages also live on the unevictable LRU, so kswapd
will not scan them over and over again.
This is achieved through various strategies:
1) add yet another page flag--PG_mlocked--to indicate that
the page is locked for efficient testing in vmscan and,
optionally, fault path. This allows early culling of
unevictable pages, preventing them from getting to
page_referenced()/try_to_unmap(). Also allows separate
accounting of mlock'd pages, as Nick's original patch
did.
Note: Nick's original mlock patch used a PG_mlocked
flag. I had removed this in favor of the PG_unevictable
flag + an mlock_count [new page struct member]. I
restored the PG_mlocked flag to eliminate the new
count field.
2) add the mlock/unevictable infrastructure to mm/mlock.c,
with internal APIs in mm/internal.h. This is a rework
of Nick's original patch to these files, taking into
account that mlocked pages are now kept on unevictable
LRU list.
3) update vmscan.c:page_evictable() to check PageMlocked()
and, if vma passed in, the vm_flags. Note that the vma
will only be passed in for new pages in the fault path;
and then only if the "cull unevictable pages in fault
path" patch is included.
4) add try_to_unlock() to rmap.c to walk a page's rmap and
ClearPageMlocked() if no other vmas have it mlocked.
Reuses as much of try_to_unmap() as possible. This
effectively replaces the use of one of the lru list links
as an mlock count. If this mechanism let's pages in mlocked
vmas leak through w/o PG_mlocked set [I don't know that it
does], we should catch them later in try_to_unmap(). One
hopes this will be rare, as it will be relatively expensive.
Original mm/internal.h, mm/rmap.c and mm/mlock.c changes:
Signed-off-by: Nick Piggin <npiggin@suse.de>
splitlru: introduce __get_user_pages():
New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS.
because current get_user_pages() can't grab PROT_NONE pages theresore it
cause PROT_NONE pages can't munlock.
[akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch]
[akpm@linux-foundation.org: untangle patch interdependencies]
[akpm@linux-foundation.org: fix things after out-of-order merging]
[hugh@veritas.com: fix page-flags mess]
[lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm']
[kosaki.motohiro@jp.fujitsu.com: build fix]
[kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments]
[kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
|
|
|
/*
|
2011-04-28 02:26:45 +04:00
|
|
|
* Special vmas that are non-mergable, non-mlock()able.
|
|
|
|
* Note: mm/huge_memory.c VM_NO_THP depends on this definition.
|
mlock: mlocked pages are unevictable
Make sure that mlocked pages also live on the unevictable LRU, so kswapd
will not scan them over and over again.
This is achieved through various strategies:
1) add yet another page flag--PG_mlocked--to indicate that
the page is locked for efficient testing in vmscan and,
optionally, fault path. This allows early culling of
unevictable pages, preventing them from getting to
page_referenced()/try_to_unmap(). Also allows separate
accounting of mlock'd pages, as Nick's original patch
did.
Note: Nick's original mlock patch used a PG_mlocked
flag. I had removed this in favor of the PG_unevictable
flag + an mlock_count [new page struct member]. I
restored the PG_mlocked flag to eliminate the new
count field.
2) add the mlock/unevictable infrastructure to mm/mlock.c,
with internal APIs in mm/internal.h. This is a rework
of Nick's original patch to these files, taking into
account that mlocked pages are now kept on unevictable
LRU list.
3) update vmscan.c:page_evictable() to check PageMlocked()
and, if vma passed in, the vm_flags. Note that the vma
will only be passed in for new pages in the fault path;
and then only if the "cull unevictable pages in fault
path" patch is included.
4) add try_to_unlock() to rmap.c to walk a page's rmap and
ClearPageMlocked() if no other vmas have it mlocked.
Reuses as much of try_to_unmap() as possible. This
effectively replaces the use of one of the lru list links
as an mlock count. If this mechanism let's pages in mlocked
vmas leak through w/o PG_mlocked set [I don't know that it
does], we should catch them later in try_to_unmap(). One
hopes this will be rare, as it will be relatively expensive.
Original mm/internal.h, mm/rmap.c and mm/mlock.c changes:
Signed-off-by: Nick Piggin <npiggin@suse.de>
splitlru: introduce __get_user_pages():
New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS.
because current get_user_pages() can't grab PROT_NONE pages theresore it
cause PROT_NONE pages can't munlock.
[akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch]
[akpm@linux-foundation.org: untangle patch interdependencies]
[akpm@linux-foundation.org: fix things after out-of-order merging]
[hugh@veritas.com: fix page-flags mess]
[lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm']
[kosaki.motohiro@jp.fujitsu.com: build fix]
[kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments]
[kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
|
|
|
*/
|
2014-03-04 03:38:27 +04:00
|
|
|
#define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_PFNMAP | VM_MIXEDMAP)
|
mlock: mlocked pages are unevictable
Make sure that mlocked pages also live on the unevictable LRU, so kswapd
will not scan them over and over again.
This is achieved through various strategies:
1) add yet another page flag--PG_mlocked--to indicate that
the page is locked for efficient testing in vmscan and,
optionally, fault path. This allows early culling of
unevictable pages, preventing them from getting to
page_referenced()/try_to_unmap(). Also allows separate
accounting of mlock'd pages, as Nick's original patch
did.
Note: Nick's original mlock patch used a PG_mlocked
flag. I had removed this in favor of the PG_unevictable
flag + an mlock_count [new page struct member]. I
restored the PG_mlocked flag to eliminate the new
count field.
2) add the mlock/unevictable infrastructure to mm/mlock.c,
with internal APIs in mm/internal.h. This is a rework
of Nick's original patch to these files, taking into
account that mlocked pages are now kept on unevictable
LRU list.
3) update vmscan.c:page_evictable() to check PageMlocked()
and, if vma passed in, the vm_flags. Note that the vma
will only be passed in for new pages in the fault path;
and then only if the "cull unevictable pages in fault
path" patch is included.
4) add try_to_unlock() to rmap.c to walk a page's rmap and
ClearPageMlocked() if no other vmas have it mlocked.
Reuses as much of try_to_unmap() as possible. This
effectively replaces the use of one of the lru list links
as an mlock count. If this mechanism let's pages in mlocked
vmas leak through w/o PG_mlocked set [I don't know that it
does], we should catch them later in try_to_unmap(). One
hopes this will be rare, as it will be relatively expensive.
Original mm/internal.h, mm/rmap.c and mm/mlock.c changes:
Signed-off-by: Nick Piggin <npiggin@suse.de>
splitlru: introduce __get_user_pages():
New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS.
because current get_user_pages() can't grab PROT_NONE pages theresore it
cause PROT_NONE pages can't munlock.
[akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch]
[akpm@linux-foundation.org: untangle patch interdependencies]
[akpm@linux-foundation.org: fix things after out-of-order merging]
[hugh@veritas.com: fix page-flags mess]
[lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm']
[kosaki.motohiro@jp.fujitsu.com: build fix]
[kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments]
[kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 07:26:44 +04:00
|
|
|
|
2014-04-08 02:37:10 +04:00
|
|
|
/* This mask defines which mm->def_flags a process can inherit its parent */
|
|
|
|
#define VM_INIT_DEF_MASK VM_NOHUGEPAGE
|
|
|
|
|
2015-11-06 05:51:36 +03:00
|
|
|
/* This mask is used to clear all the VMA flags used by mlock */
|
|
|
|
#define VM_LOCKED_CLEAR_MASK (~(VM_LOCKED | VM_LOCKONFAULT))
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
* mapping from the currently active vm_flags protection bits (the
|
|
|
|
* low four bits) to a page protection mask..
|
|
|
|
*/
|
|
|
|
extern pgprot_t protection_map[16];
|
|
|
|
|
2007-07-19 12:47:03 +04:00
|
|
|
#define FAULT_FLAG_WRITE 0x01 /* Fault was a write access */
|
2015-02-11 01:09:51 +03:00
|
|
|
#define FAULT_FLAG_MKWRITE 0x02 /* Fault was mkwrite of existing pte */
|
|
|
|
#define FAULT_FLAG_ALLOW_RETRY 0x04 /* Retry fault if blocking */
|
|
|
|
#define FAULT_FLAG_RETRY_NOWAIT 0x08 /* Don't drop mmap_sem and wait when retrying */
|
|
|
|
#define FAULT_FLAG_KILLABLE 0x10 /* The fault task is in SIGKILL killable region */
|
|
|
|
#define FAULT_FLAG_TRIED 0x20 /* Second try */
|
|
|
|
#define FAULT_FLAG_USER 0x40 /* The fault originated in userspace */
|
2016-02-13 00:02:21 +03:00
|
|
|
#define FAULT_FLAG_REMOTE 0x80 /* faulting for non current tsk/mm */
|
2016-02-13 00:02:24 +03:00
|
|
|
#define FAULT_FLAG_INSTRUCTION 0x100 /* The fault was during an instruction fetch */
|
2007-07-19 12:47:03 +04:00
|
|
|
|
2017-02-23 02:39:50 +03:00
|
|
|
#define FAULT_FLAG_TRACE \
|
|
|
|
{ FAULT_FLAG_WRITE, "WRITE" }, \
|
|
|
|
{ FAULT_FLAG_MKWRITE, "MKWRITE" }, \
|
|
|
|
{ FAULT_FLAG_ALLOW_RETRY, "ALLOW_RETRY" }, \
|
|
|
|
{ FAULT_FLAG_RETRY_NOWAIT, "RETRY_NOWAIT" }, \
|
|
|
|
{ FAULT_FLAG_KILLABLE, "KILLABLE" }, \
|
|
|
|
{ FAULT_FLAG_TRIED, "TRIED" }, \
|
|
|
|
{ FAULT_FLAG_USER, "USER" }, \
|
|
|
|
{ FAULT_FLAG_REMOTE, "REMOTE" }, \
|
|
|
|
{ FAULT_FLAG_INSTRUCTION, "INSTRUCTION" }
|
|
|
|
|
2007-07-19 12:46:59 +04:00
|
|
|
/*
|
2007-07-19 12:47:03 +04:00
|
|
|
* vm_fault is filled by the the pagefault handler and passed to the vma's
|
2007-07-19 12:47:05 +04:00
|
|
|
* ->fault function. The vma's ->fault is responsible for returning a bitmask
|
|
|
|
* of VM_FAULT_xxx flags that give details about how the fault was handled.
|
2007-07-19 12:46:59 +04:00
|
|
|
*
|
2016-01-15 02:20:12 +03:00
|
|
|
* MM layer fills up gfp_mask for page allocations but fault handler might
|
|
|
|
* alter it if its implementation requires a different allocation context.
|
|
|
|
*
|
2015-02-11 01:09:51 +03:00
|
|
|
* pgoff should be used in favour of virtual_address, if possible.
|
2007-07-19 12:46:59 +04:00
|
|
|
*/
|
2007-07-19 12:47:03 +04:00
|
|
|
struct vm_fault {
|
2016-12-15 02:06:58 +03:00
|
|
|
struct vm_area_struct *vma; /* Target VMA */
|
2007-07-19 12:47:03 +04:00
|
|
|
unsigned int flags; /* FAULT_FLAG_xxx flags */
|
2016-01-15 02:20:12 +03:00
|
|
|
gfp_t gfp_mask; /* gfp mask to be used for allocations */
|
2007-07-19 12:47:03 +04:00
|
|
|
pgoff_t pgoff; /* Logical page offset based on vma */
|
2016-12-15 02:06:58 +03:00
|
|
|
unsigned long address; /* Faulting virtual address */
|
|
|
|
pmd_t *pmd; /* Pointer to pmd entry matching
|
2016-12-15 02:07:16 +03:00
|
|
|
* the 'address' */
|
mm,fs,dax: change ->pmd_fault to ->huge_fault
Patch series "1G transparent hugepage support for device dax", v2.
The following series implements support for 1G trasparent hugepage on
x86 for device dax. The bulk of the code was written by Mathew Wilcox a
while back supporting transparent 1G hugepage for fs DAX. I have
forward ported the relevant bits to 4.10-rc. The current submission has
only the necessary code to support device DAX.
Comments from Dan Williams: So the motivation and intended user of this
functionality mirrors the motivation and users of 1GB page support in
hugetlbfs. Given expected capacities of persistent memory devices an
in-memory database may want to reduce tlb pressure beyond what they can
already achieve with 2MB mappings of a device-dax file. We have
customer feedback to that effect as Willy mentioned in his previous
version of these patches [1].
[1]: https://lkml.org/lkml/2016/1/31/52
Comments from Nilesh @ Oracle:
There are applications which have a process model; and if you assume
10,000 processes attempting to mmap all the 6TB memory available on a
server; we are looking at the following:
processes : 10,000
memory : 6TB
pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB
pmd @ 2M page size: 120,000 / 512 = ~240GB
pud @ 1G page size: 240GB / 512 = ~480MB
As you can see with 2M pages, this system will use up an exorbitant
amount of DRAM to hold the page tables; but the 1G pages finally brings
it down to a reasonable level. Memory sizes will keep increasing; so
this number will keep increasing.
An argument can be made to convert the applications from process model
to thread model, but in the real world that may not be always practical.
Hopefully this helps explain the use case where this is valuable.
This patch (of 3):
In preparation for adding the ability to handle PUD pages, convert
vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The
vm_fault structure is extended to include a union of the different page
table pointers that may be needed, and three flag bits are reserved to
indicate which type of pointer is in the union.
[ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()]
Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com
[dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path]
Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com
Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 01:56:59 +03:00
|
|
|
pud_t *pud; /* Pointer to pud entry matching
|
|
|
|
* the 'address'
|
|
|
|
*/
|
2016-12-15 02:07:16 +03:00
|
|
|
pte_t orig_pte; /* Value of PTE at the time of fault */
|
2007-07-19 12:47:03 +04:00
|
|
|
|
2016-12-15 02:07:18 +03:00
|
|
|
struct page *cow_page; /* Page handler may use for COW fault */
|
|
|
|
struct mem_cgroup *memcg; /* Cgroup cow_page belongs to */
|
2007-07-19 12:47:03 +04:00
|
|
|
struct page *page; /* ->fault handlers should return a
|
2007-07-19 12:47:05 +04:00
|
|
|
* page here, unless VM_FAULT_NOPAGE
|
2007-07-19 12:47:03 +04:00
|
|
|
* is set (which is also implied by
|
2007-07-19 12:47:05 +04:00
|
|
|
* VM_FAULT_ERROR).
|
2007-07-19 12:47:03 +04:00
|
|
|
*/
|
2016-12-15 02:06:58 +03:00
|
|
|
/* These three entries are valid only while holding ptl lock */
|
2016-07-27 01:25:20 +03:00
|
|
|
pte_t *pte; /* Pointer to pte entry matching
|
|
|
|
* the 'address'. NULL if the page
|
|
|
|
* table hasn't been allocated.
|
|
|
|
*/
|
|
|
|
spinlock_t *ptl; /* Page table lock.
|
|
|
|
* Protects pte page table if 'pte'
|
|
|
|
* is not NULL, otherwise pmd.
|
|
|
|
*/
|
2016-07-27 01:25:23 +03:00
|
|
|
pgtable_t prealloc_pte; /* Pre-allocated pte page table.
|
|
|
|
* vm_ops->map_pages() calls
|
|
|
|
* alloc_set_pte() from atomic context.
|
|
|
|
* do_fault_around() pre-allocates
|
|
|
|
* page table to avoid allocation from
|
|
|
|
* atomic context.
|
|
|
|
*/
|
2007-07-19 12:46:59 +04:00
|
|
|
};
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2017-02-25 01:57:08 +03:00
|
|
|
/* page entry size for vm->huge_fault() */
|
|
|
|
enum page_entry_size {
|
|
|
|
PE_SIZE_PTE = 0,
|
|
|
|
PE_SIZE_PMD,
|
|
|
|
PE_SIZE_PUD,
|
|
|
|
};
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
* These are the virtual MM functions - opening of an area, closing and
|
|
|
|
* unmapping it (needed to keep files on disk up-to-date etc), pointer
|
|
|
|
* to the functions called when a no-page or a wp-page exception occurs.
|
|
|
|
*/
|
|
|
|
struct vm_operations_struct {
|
|
|
|
void (*open)(struct vm_area_struct * area);
|
|
|
|
void (*close)(struct vm_area_struct * area);
|
2017-11-30 03:10:28 +03:00
|
|
|
int (*split)(struct vm_area_struct * area, unsigned long addr);
|
2015-09-05 01:48:04 +03:00
|
|
|
int (*mremap)(struct vm_area_struct * area);
|
2017-02-25 01:56:41 +03:00
|
|
|
int (*fault)(struct vm_fault *vmf);
|
2017-02-25 01:57:08 +03:00
|
|
|
int (*huge_fault)(struct vm_fault *vmf, enum page_entry_size pe_size);
|
2016-12-15 02:06:58 +03:00
|
|
|
void (*map_pages)(struct vm_fault *vmf,
|
2016-07-27 01:25:20 +03:00
|
|
|
pgoff_t start_pgoff, pgoff_t end_pgoff);
|
2006-06-23 13:03:43 +04:00
|
|
|
|
|
|
|
/* notification that a previously read-only page is about to become
|
|
|
|
* writable, if an error is returned it will cause a SIGBUS */
|
2017-02-25 01:56:41 +03:00
|
|
|
int (*page_mkwrite)(struct vm_fault *vmf);
|
2008-07-24 08:27:05 +04:00
|
|
|
|
2015-04-16 02:15:11 +03:00
|
|
|
/* same as page_mkwrite when using VM_PFNMAP|VM_MIXEDMAP */
|
2017-02-25 01:56:41 +03:00
|
|
|
int (*pfn_mkwrite)(struct vm_fault *vmf);
|
2015-04-16 02:15:11 +03:00
|
|
|
|
2008-07-24 08:27:05 +04:00
|
|
|
/* called by access_process_vm when get_user_pages() fails, typically
|
|
|
|
* for use by special VMAs that can switch between memory and hardware
|
|
|
|
*/
|
|
|
|
int (*access)(struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
void *buf, int len, int write);
|
2014-05-20 02:58:32 +04:00
|
|
|
|
|
|
|
/* Called by the /proc/PID/maps code to ask the vma whether it
|
|
|
|
* has a special name. Returning non-NULL will also cause this
|
|
|
|
* vma to be dumped unconditionally. */
|
|
|
|
const char *(*name)(struct vm_area_struct *vma);
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
#ifdef CONFIG_NUMA
|
2008-04-28 13:13:14 +04:00
|
|
|
/*
|
|
|
|
* set_policy() op must add a reference to any non-NULL @new mempolicy
|
|
|
|
* to hold the policy upon return. Caller should pass NULL @new to
|
|
|
|
* remove a policy and fall back to surrounding context--i.e. do not
|
|
|
|
* install a MPOL_DEFAULT policy, nor the task or system default
|
|
|
|
* mempolicy.
|
|
|
|
*/
|
2005-04-17 02:20:36 +04:00
|
|
|
int (*set_policy)(struct vm_area_struct *vma, struct mempolicy *new);
|
2008-04-28 13:13:14 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* get_policy() op must add reference [mpol_get()] to any policy at
|
|
|
|
* (vma,addr) marked as MPOL_SHARED. The shared policy infrastructure
|
|
|
|
* in mm/mempolicy.c will do this automatically.
|
|
|
|
* get_policy() must NOT add a ref if the policy at (vma,addr) is not
|
|
|
|
* marked as MPOL_SHARED. vma policies are protected by the mmap_sem.
|
|
|
|
* If no [shared/vma] mempolicy exists at the addr, get_policy() op
|
|
|
|
* must return NULL--i.e., do not "fallback" to task or system default
|
|
|
|
* policy.
|
|
|
|
*/
|
2005-04-17 02:20:36 +04:00
|
|
|
struct mempolicy *(*get_policy)(struct vm_area_struct *vma,
|
|
|
|
unsigned long addr);
|
|
|
|
#endif
|
2014-12-18 17:48:15 +03:00
|
|
|
/*
|
|
|
|
* Called by vm_normal_page() for special PTEs to find the
|
|
|
|
* page for @addr. This is useful if the default behavior
|
|
|
|
* (using pte_page()) would not find the correct page.
|
|
|
|
*/
|
|
|
|
struct page *(*find_special_page)(struct vm_area_struct *vma,
|
|
|
|
unsigned long addr);
|
2005-04-17 02:20:36 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
struct mmu_gather;
|
|
|
|
struct inode;
|
|
|
|
|
2006-01-08 12:04:36 +03:00
|
|
|
#define page_private(page) ((page)->private)
|
|
|
|
#define set_page_private(page, v) ((page)->private = (v))
|
[PATCH] mm: split page table lock
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with
a many-threaded application which concurrently initializes different parts of
a large anonymous area.
This patch corrects that, by using a separate spinlock per page table page, to
guard the page table entries in that page, instead of using the mm's single
page_table_lock. (But even then, page_table_lock is still used to guard page
table allocation, and anon_vma allocation.)
In this implementation, the spinlock is tucked inside the struct page of the
page table page: with a BUILD_BUG_ON in case it overflows - which it would in
the case of 32-bit PA-RISC with spinlock debugging enabled.
Splitting the lock is not quite for free: another cacheline access. Ideally,
I suppose we would use split ptlock only for multi-threaded processes on
multi-cpu machines; but deciding that dynamically would have its own costs.
So for now enable it by config, at some number of cpus - since the Kconfig
language doesn't support inequalities, let preprocessor compare that with
NR_CPUS. But I don't think it's worth being user-configurable: for good
testing of both split and unsplit configs, split now at 4 cpus, and perhaps
change that to 8 later.
There is a benefit even for singly threaded processes: kswapd can be attacking
one part of the mm while another part is busy faulting.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
|
|
|
|
2016-01-16 03:56:52 +03:00
|
|
|
#if !defined(__HAVE_ARCH_PTE_DEVMAP) || !defined(CONFIG_TRANSPARENT_HUGEPAGE)
|
|
|
|
static inline int pmd_devmap(pmd_t pmd)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
2017-02-25 01:57:02 +03:00
|
|
|
static inline int pud_devmap(pud_t pud)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
2017-03-16 18:26:53 +03:00
|
|
|
static inline int pgd_devmap(pgd_t pgd)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
2016-01-16 03:56:52 +03:00
|
|
|
#endif
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
* FIXME: take this include out, include page-flags.h in
|
|
|
|
* files which need it (119 of them)
|
|
|
|
*/
|
|
|
|
#include <linux/page-flags.h>
|
thp: transparent hugepage core
Lately I've been working to make KVM use hugepages transparently without
the usual restrictions of hugetlbfs. Some of the restrictions I'd like to
see removed:
1) hugepages have to be swappable or the guest physical memory remains
locked in RAM and can't be paged out to swap
2) if a hugepage allocation fails, regular pages should be allocated
instead and mixed in the same vma without any failure and without
userland noticing
3) if some task quits and more hugepages become available in the
buddy, guest physical memory backed by regular pages should be
relocated on hugepages automatically in regions under
madvise(MADV_HUGEPAGE) (ideally event driven by waking up the
kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes
not null)
4) avoidance of reservation and maximization of use of hugepages whenever
possible. Reservation (needed to avoid runtime fatal faliures) may be ok for
1 machine with 1 database with 1 database cache with 1 database cache size
known at boot time. It's definitely not feasible with a virtualization
hypervisor usage like RHEV-H that runs an unknown number of virtual machines
with an unknown size of each virtual machine with an unknown amount of
pagecache that could be potentially useful in the host for guest not using
O_DIRECT (aka cache=off).
hugepages in the virtualization hypervisor (and also in the guest!) are
much more important than in a regular host not using virtualization,
becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24
to 19 in case only the hypervisor uses transparent hugepages, and they
decrease the tlb-miss cacheline accesses from 19 to 15 in case both the
linux hypervisor and the linux guest both uses this patch (though the
guest will limit the addition speedup to anonymous regions only for
now...). Even more important is that the tlb miss handler is much slower
on a NPT/EPT guest than for a regular shadow paging or no-virtualization
scenario. So maximizing the amount of virtual memory cached by the TLB
pays off significantly more with NPT/EPT than without (even if there would
be no significant speedup in the tlb-miss runtime).
The first (and more tedious) part of this work requires allowing the VM to
handle anonymous hugepages mixed with regular pages transparently on
regular anonymous vmas. This is what this patch tries to achieve in the
least intrusive possible way. We want hugepages and hugetlb to be used in
a way so that all applications can benefit without changes (as usual we
leverage the KVM virtualization design: by improving the Linux VM at
large, KVM gets the performance boost too).
The most important design choice is: always fallback to 4k allocation if
the hugepage allocation fails! This is the _very_ opposite of some large
pagecache patches that failed with -EIO back then if a 64k (or similar)
allocation failed...
Second important decision (to reduce the impact of the feature on the
existing pagetable handling code) is that at any time we can split an
hugepage into 512 regular pages and it has to be done with an operation
that can't fail. This way the reliability of the swapping isn't decreased
(no need to allocate memory when we are short on memory to swap) and it's
trivial to plug a split_huge_page* one-liner where needed without
polluting the VM. Over time we can teach mprotect, mremap and friends to
handle pmd_trans_huge natively without calling split_huge_page*. The fact
it can't fail isn't just for swap: if split_huge_page would return -ENOMEM
(instead of the current void) we'd need to rollback the mprotect from the
middle of it (ideally including undoing the split_vma) which would be a
big change and in the very wrong direction (it'd likely be simpler not to
call split_huge_page at all and to teach mprotect and friends to handle
hugepages instead of rolling them back from the middle). In short the
very value of split_huge_page is that it can't fail.
The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and
incremental and it'll just be an "harmless" addition later if this initial
part is agreed upon. It also should be noted that locking-wise replacing
regular pages with hugepages is going to be very easy if compared to what
I'm doing below in split_huge_page, as it will only happen when
page_count(page) matches page_mapcount(page) if we can take the PG_lock
and mmap_sem in write mode. collapse_huge_page will be a "best effort"
that (unlike split_huge_page) can fail at the minimal sign of trouble and
we can try again later. collapse_huge_page will be similar to how KSM
works and the madvise(MADV_HUGEPAGE) will work similar to
madvise(MADV_MERGEABLE).
The default I like is that transparent hugepages are used at page fault
time. This can be changed with
/sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set
to three values "always", "madvise", "never" which mean respectively that
hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions,
or never used. /sys/kernel/mm/transparent_hugepage/defrag instead
controls if the hugepage allocation should defrag memory aggressively
"always", only inside "madvise" regions, or "never".
The pmd_trans_splitting/pmd_trans_huge locking is very solid. The
put_page (from get_user_page users that can't use mmu notifier like
O_DIRECT) that runs against a __split_huge_page_refcount instead was a
pain to serialize in a way that would result always in a coherent page
count for both tail and head. I think my locking solution with a
compound_lock taken only after the page_first is valid and is still a
PageHead should be safe but it surely needs review from SMP race point of
view. In short there is no current existing way to serialize the O_DIRECT
final put_page against split_huge_page_refcount so I had to invent a new
one (O_DIRECT loses knowledge on the mapping status by the time gup_fast
returns so...). And I didn't want to impact all gup/gup_fast users for
now, maybe if we change the gup interface substantially we can avoid this
locking, I admit I didn't think too much about it because changing the gup
unpinning interface would be invasive.
If we ignored O_DIRECT we could stick to the existing compound refcounting
code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM
(and any other mmu notifier user) would call it without FOLL_GET (and if
FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the
current task mmu notifier list yet). But O_DIRECT is fundamental for
decent performance of virtualized I/O on fast storage so we can't avoid it
to solve the race of put_page against split_huge_page_refcount to achieve
a complete hugepage feature for KVM.
Swap and oom works fine (well just like with regular pages ;). MMU
notifier is handled transparently too, with the exception of the young bit
on the pmd, that didn't have a range check but I think KVM will be fine
because the whole point of hugepages is that EPT/NPT will also use a huge
pmd when they notice gup returns pages with PageCompound set, so they
won't care of a range and there's just the pmd young bit to check in that
case.
NOTE: in some cases if the L2 cache is small, this may slowdown and waste
memory during COWs because 4M of memory are accessed in a single fault
instead of 8k (the payoff is that after COW the program can run faster).
So we might want to switch the copy_huge_page (and clear_huge_page too) to
not temporal stores. I also extensively researched ways to avoid this
cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k
up to 1M (I can send those patches that fully implemented prefault) but I
concluded they're not worth it and they add an huge additional complexity
and they remove all tlb benefits until the full hugepage has been faulted
in, to save a little bit of memory and some cache during app startup, but
they still don't improve substantially the cache-trashing during startup
if the prefault happens in >4k chunks. One reason is that those 4k pte
entries copied are still mapped on a perfectly cache-colored hugepage, so
the trashing is the worst one can generate in those copies (cow of 4k page
copies aren't so well colored so they trashes less, but again this results
in software running faster after the page fault). Those prefault patches
allowed things like a pte where post-cow pages were local 4k regular anon
pages and the not-yet-cowed pte entries were pointing in the middle of
some hugepage mapped read-only. If it doesn't payoff substantially with
todays hardware it will payoff even less in the future with larger l2
caches, and the prefault logic would blot the VM a lot. If one is
emebdded transparent_hugepage can be disabled during boot with sysfs or
with the boot commandline parameter transparent_hugepage=0 (or
transparent_hugepage=2 to restrict hugepages inside madvise regions) that
will ensure not a single hugepage is allocated at boot time. It is simple
enough to just disable transparent hugepage globally and let transparent
hugepages be allocated selectively by applications in the MADV_HUGEPAGE
region (both at page fault time, and if enabled with the
collapse_huge_page too through the kernel daemon).
This patch supports only hugepages mapped in the pmd, archs that have
smaller hugepages will not fit in this patch alone. Also some archs like
power have certain tlb limits that prevents mixing different page size in
the same regions so they will not fit in this framework that requires
"graceful fallback" to basic PAGE_SIZE in case of physical memory
fragmentation. hugetlbfs remains a perfect fit for those because its
software limits happen to match the hardware limits. hugetlbfs also
remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped
to be found not fragmented after a certain system uptime and that would be
very expensive to defragment with relocation, so requiring reservation.
hugetlbfs is the "reservation way", the point of transparent hugepages is
not to have any reservation at all and maximizing the use of cache and
hugepages at all times automatically.
Some performance result:
vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep
ages3
memset page fault 1566023
memset tlb miss 453854
memset second tlb miss 453321
random access tlb miss 41635
random access second tlb miss 41658
vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3
memset page fault 1566471
memset tlb miss 453375
memset second tlb miss 453320
random access tlb miss 41636
random access second tlb miss 41637
vmx andrea # ./largepages3
memset page fault 1566642
memset tlb miss 453417
memset second tlb miss 453313
random access tlb miss 41630
random access second tlb miss 41647
vmx andrea # ./largepages3
memset page fault 1566872
memset tlb miss 453418
memset second tlb miss 453315
random access tlb miss 41618
random access second tlb miss 41659
vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage
vmx andrea # ./largepages3
memset page fault 2182476
memset tlb miss 460305
memset second tlb miss 460179
random access tlb miss 44483
random access second tlb miss 44186
vmx andrea # ./largepages3
memset page fault 2182791
memset tlb miss 460742
memset second tlb miss 459962
random access tlb miss 43981
random access second tlb miss 43988
============
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/time.h>
#define SIZE (3UL*1024*1024*1024)
int main()
{
char *p = malloc(SIZE), *p2;
struct timeval before, after;
gettimeofday(&before, NULL);
memset(p, 0, SIZE);
gettimeofday(&after, NULL);
printf("memset page fault %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);
gettimeofday(&before, NULL);
memset(p, 0, SIZE);
gettimeofday(&after, NULL);
printf("memset tlb miss %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);
gettimeofday(&before, NULL);
memset(p, 0, SIZE);
gettimeofday(&after, NULL);
printf("memset second tlb miss %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);
gettimeofday(&before, NULL);
for (p2 = p; p2 < p+SIZE; p2 += 4096)
*p2 = 0;
gettimeofday(&after, NULL);
printf("random access tlb miss %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);
gettimeofday(&before, NULL);
for (p2 = p; p2 < p+SIZE; p2 += 4096)
*p2 = 0;
gettimeofday(&after, NULL);
printf("random access second tlb miss %Lu\n",
(after.tv_sec-before.tv_sec)*1000000UL +
after.tv_usec-before.tv_usec);
return 0;
}
============
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 02:46:52 +03:00
|
|
|
#include <linux/huge_mm.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Methods to modify the page usage count.
|
|
|
|
*
|
|
|
|
* What counts for a page usage:
|
|
|
|
* - cache mapping (page->mapping)
|
|
|
|
* - private data (page->private)
|
|
|
|
* - page mapped in a task's page tables, each mapping
|
|
|
|
* is counted separately
|
|
|
|
*
|
|
|
|
* Also, many kernel routines increase the page count before a critical
|
|
|
|
* routine so they can be sure the page doesn't go away from under them.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
2006-09-26 10:31:35 +04:00
|
|
|
* Drop a ref, return true if the refcount fell to zero (the page has no users)
|
2005-04-17 02:20:36 +04:00
|
|
|
*/
|
2006-03-22 11:08:03 +03:00
|
|
|
static inline int put_page_testzero(struct page *page)
|
|
|
|
{
|
2016-03-18 00:19:26 +03:00
|
|
|
VM_BUG_ON_PAGE(page_ref_count(page) == 0, page);
|
|
|
|
return page_ref_dec_and_test(page);
|
2006-03-22 11:08:03 +03:00
|
|
|
}
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
/*
|
2006-03-22 11:08:03 +03:00
|
|
|
* Try to grab a ref unless the page has a refcount of zero, return false if
|
|
|
|
* that is the case.
|
2013-08-28 12:37:42 +04:00
|
|
|
* This can be called when MMU is off so it must not access
|
|
|
|
* any of the virtual mappings.
|
2005-04-17 02:20:36 +04:00
|
|
|
*/
|
2006-03-22 11:08:03 +03:00
|
|
|
static inline int get_page_unless_zero(struct page *page)
|
|
|
|
{
|
2016-03-18 00:19:26 +03:00
|
|
|
return page_ref_add_unless(page, 1, 0);
|
2006-03-22 11:08:03 +03:00
|
|
|
}
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2010-01-27 06:06:39 +03:00
|
|
|
extern int page_is_ram(unsigned long pfn);
|
2015-08-11 06:07:05 +03:00
|
|
|
|
|
|
|
enum {
|
|
|
|
REGION_INTERSECTS,
|
|
|
|
REGION_DISJOINT,
|
|
|
|
REGION_MIXED,
|
|
|
|
};
|
|
|
|
|
2016-01-26 23:57:28 +03:00
|
|
|
int region_intersects(resource_size_t offset, size_t size, unsigned long flags,
|
|
|
|
unsigned long desc);
|
2010-01-27 06:06:39 +03:00
|
|
|
|
2008-02-05 09:28:31 +03:00
|
|
|
/* Support for virtually mapped pages */
|
2008-02-05 09:28:32 +03:00
|
|
|
struct page *vmalloc_to_page(const void *addr);
|
|
|
|
unsigned long vmalloc_to_pfn(const void *addr);
|
2008-02-05 09:28:31 +03:00
|
|
|
|
2008-03-12 10:51:31 +03:00
|
|
|
/*
|
|
|
|
* Determine if an address is within the vmalloc range
|
|
|
|
*
|
|
|
|
* On nommu, vmalloc/vfree wrap through kmalloc/kfree directly, so there
|
|
|
|
* is no special casing required.
|
|
|
|
*/
|
2016-05-20 03:11:29 +03:00
|
|
|
static inline bool is_vmalloc_addr(const void *x)
|
2008-02-05 09:28:34 +03:00
|
|
|
{
|
2008-03-12 10:51:31 +03:00
|
|
|
#ifdef CONFIG_MMU
|
2008-02-05 09:28:34 +03:00
|
|
|
unsigned long addr = (unsigned long)x;
|
|
|
|
|
|
|
|
return addr >= VMALLOC_START && addr < VMALLOC_END;
|
2008-03-12 10:51:31 +03:00
|
|
|
#else
|
2016-05-20 03:11:29 +03:00
|
|
|
return false;
|
2008-02-24 02:23:37 +03:00
|
|
|
#endif
|
2008-03-12 10:51:31 +03:00
|
|
|
}
|
2009-09-23 03:45:49 +04:00
|
|
|
#ifdef CONFIG_MMU
|
|
|
|
extern int is_vmalloc_or_module_addr(const void *x);
|
|
|
|
#else
|
2009-09-24 15:33:32 +04:00
|
|
|
static inline int is_vmalloc_or_module_addr(const void *x)
|
2009-09-23 03:45:49 +04:00
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
2008-02-05 09:28:34 +03:00
|
|
|
|
2017-05-09 01:57:09 +03:00
|
|
|
extern void *kvmalloc_node(size_t size, gfp_t flags, int node);
|
|
|
|
static inline void *kvmalloc(size_t size, gfp_t flags)
|
|
|
|
{
|
|
|
|
return kvmalloc_node(size, flags, NUMA_NO_NODE);
|
|
|
|
}
|
|
|
|
static inline void *kvzalloc_node(size_t size, gfp_t flags, int node)
|
|
|
|
{
|
|
|
|
return kvmalloc_node(size, flags | __GFP_ZERO, node);
|
|
|
|
}
|
|
|
|
static inline void *kvzalloc(size_t size, gfp_t flags)
|
|
|
|
{
|
|
|
|
return kvmalloc(size, flags | __GFP_ZERO);
|
|
|
|
}
|
|
|
|
|
2017-05-09 01:57:27 +03:00
|
|
|
static inline void *kvmalloc_array(size_t n, size_t size, gfp_t flags)
|
|
|
|
{
|
|
|
|
if (size != 0 && n > SIZE_MAX / size)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return kvmalloc(n * size, flags);
|
|
|
|
}
|
|
|
|
|
2014-05-06 22:02:53 +04:00
|
|
|
extern void kvfree(const void *addr);
|
|
|
|
|
2016-01-16 03:53:42 +03:00
|
|
|
static inline atomic_t *compound_mapcount_ptr(struct page *page)
|
|
|
|
{
|
|
|
|
return &page[1].compound_mapcount;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int compound_mapcount(struct page *page)
|
|
|
|
{
|
2016-05-21 02:58:24 +03:00
|
|
|
VM_BUG_ON_PAGE(!PageCompound(page), page);
|
2016-01-16 03:53:42 +03:00
|
|
|
page = compound_head(page);
|
|
|
|
return atomic_read(compound_mapcount_ptr(page)) + 1;
|
|
|
|
}
|
|
|
|
|
2011-11-03 00:36:59 +04:00
|
|
|
/*
|
|
|
|
* The atomic page->_mapcount, starts from -1: so that transitions
|
|
|
|
* both from it and to it can be tracked, using atomic_inc_and_test
|
|
|
|
* and atomic_add_negative(-1).
|
|
|
|
*/
|
2013-02-23 04:34:59 +04:00
|
|
|
static inline void page_mapcount_reset(struct page *page)
|
2011-11-03 00:36:59 +04:00
|
|
|
{
|
|
|
|
atomic_set(&(page)->_mapcount, -1);
|
|
|
|
}
|
|
|
|
|
2016-01-16 03:54:37 +03:00
|
|
|
int __page_mapcount(struct page *page);
|
|
|
|
|
2011-11-03 00:36:59 +04:00
|
|
|
static inline int page_mapcount(struct page *page)
|
|
|
|
{
|
2015-02-12 02:24:48 +03:00
|
|
|
VM_BUG_ON_PAGE(PageSlab(page), page);
|
2016-01-16 03:53:42 +03:00
|
|
|
|
2016-01-16 03:54:37 +03:00
|
|
|
if (unlikely(PageCompound(page)))
|
|
|
|
return __page_mapcount(page);
|
|
|
|
return atomic_read(&page->_mapcount) + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
|
|
|
int total_mapcount(struct page *page);
|
mm: thp: calculate the mapcount correctly for THP pages during WP faults
This will provide fully accuracy to the mapcount calculation in the
write protect faults, so page pinning will not get broken by false
positive copy-on-writes.
total_mapcount() isn't the right calculation needed in
reuse_swap_page(), so this introduces a page_trans_huge_mapcount()
that is effectively the full accurate return value for page_mapcount()
if dealing with Transparent Hugepages, however we only use the
page_trans_huge_mapcount() during COW faults where it strictly needed,
due to its higher runtime cost.
This also provide at practical zero cost the total_mapcount
information which is needed to know if we can still relocate the page
anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we
can reuse the page no matter if it's a pte or a pmd_trans_huge
triggering the fault, but we can only relocate the page anon_vma to
the local vma->anon_vma if we're sure it's only this "vma" mapping the
whole THP physical range.
Kirill A. Shutemov discovered the problem with moving the page
anon_vma to the local vma->anon_vma in a previous version of this
patch and another problem in the way page_move_anon_rmap() was called.
Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a
previous version, because reuse_swap_page must be a macro to call
page_trans_huge_mapcount from swap.h, so this uses a macro again
instead of an inline function. With this change at least it's a less
dangerous usage than it was before, because "page" is used only once
now, while with the previous code reuse_swap_page(page++) would have
called page_mapcount on page+1 and it would have increased page twice
instead of just once.
Dean Luick noticed an uninitialized variable that could result in a
rmap inefficiency for the non-THP case in a previous version.
Mike Marciniszyn said:
: Our RDMA tests are seeing an issue with memory locking that bisects to
: commit 61f5d698cc97 ("mm: re-enable THP")
:
: The test program registers two rather large MRs (512M) and RDMA
: writes data to a passive peer using the first and RDMA reads it back
: into the second MR and compares that data. The sizes are chosen randomly
: between 0 and 1024 bytes.
:
: The test will get through a few (<= 4 iterations) and then gets a
: compare error.
:
: Tracing indicates the kernel logical addresses associated with the individual
: pages at registration ARE correct , the data in the "RDMA read response only"
: packets ARE correct.
:
: The "corruption" occurs when the packet crosse two pages that are not physically
: contiguous. The second page reads back as zero in the program.
:
: It looks like the user VA at the point of the compare error no longer points to
: the same physical address as was registered.
:
: This patch totally resolves the issue!
Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Josh Collier <josh.d.collier@intel.com>
Cc: Marc Haber <mh+linux-kernel@zugschlus.de>
Cc: <stable@vger.kernel.org> [4.5]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-13 01:42:25 +03:00
|
|
|
int page_trans_huge_mapcount(struct page *page, int *total_mapcount);
|
2016-01-16 03:54:37 +03:00
|
|
|
#else
|
|
|
|
static inline int total_mapcount(struct page *page)
|
|
|
|
{
|
|
|
|
return page_mapcount(page);
|
2011-11-03 00:36:59 +04:00
|
|
|
}
|
mm: thp: calculate the mapcount correctly for THP pages during WP faults
This will provide fully accuracy to the mapcount calculation in the
write protect faults, so page pinning will not get broken by false
positive copy-on-writes.
total_mapcount() isn't the right calculation needed in
reuse_swap_page(), so this introduces a page_trans_huge_mapcount()
that is effectively the full accurate return value for page_mapcount()
if dealing with Transparent Hugepages, however we only use the
page_trans_huge_mapcount() during COW faults where it strictly needed,
due to its higher runtime cost.
This also provide at practical zero cost the total_mapcount
information which is needed to know if we can still relocate the page
anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we
can reuse the page no matter if it's a pte or a pmd_trans_huge
triggering the fault, but we can only relocate the page anon_vma to
the local vma->anon_vma if we're sure it's only this "vma" mapping the
whole THP physical range.
Kirill A. Shutemov discovered the problem with moving the page
anon_vma to the local vma->anon_vma in a previous version of this
patch and another problem in the way page_move_anon_rmap() was called.
Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a
previous version, because reuse_swap_page must be a macro to call
page_trans_huge_mapcount from swap.h, so this uses a macro again
instead of an inline function. With this change at least it's a less
dangerous usage than it was before, because "page" is used only once
now, while with the previous code reuse_swap_page(page++) would have
called page_mapcount on page+1 and it would have increased page twice
instead of just once.
Dean Luick noticed an uninitialized variable that could result in a
rmap inefficiency for the non-THP case in a previous version.
Mike Marciniszyn said:
: Our RDMA tests are seeing an issue with memory locking that bisects to
: commit 61f5d698cc97 ("mm: re-enable THP")
:
: The test program registers two rather large MRs (512M) and RDMA
: writes data to a passive peer using the first and RDMA reads it back
: into the second MR and compares that data. The sizes are chosen randomly
: between 0 and 1024 bytes.
:
: The test will get through a few (<= 4 iterations) and then gets a
: compare error.
:
: Tracing indicates the kernel logical addresses associated with the individual
: pages at registration ARE correct , the data in the "RDMA read response only"
: packets ARE correct.
:
: The "corruption" occurs when the packet crosse two pages that are not physically
: contiguous. The second page reads back as zero in the program.
:
: It looks like the user VA at the point of the compare error no longer points to
: the same physical address as was registered.
:
: This patch totally resolves the issue!
Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Josh Collier <josh.d.collier@intel.com>
Cc: Marc Haber <mh+linux-kernel@zugschlus.de>
Cc: <stable@vger.kernel.org> [4.5]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-13 01:42:25 +03:00
|
|
|
static inline int page_trans_huge_mapcount(struct page *page,
|
|
|
|
int *total_mapcount)
|
|
|
|
{
|
|
|
|
int mapcount = page_mapcount(page);
|
|
|
|
if (total_mapcount)
|
|
|
|
*total_mapcount = mapcount;
|
|
|
|
return mapcount;
|
|
|
|
}
|
2016-01-16 03:54:37 +03:00
|
|
|
#endif
|
2011-11-03 00:36:59 +04:00
|
|
|
|
2007-05-07 01:49:41 +04:00
|
|
|
static inline struct page *virt_to_head_page(const void *x)
|
|
|
|
{
|
|
|
|
struct page *page = virt_to_page(x);
|
2015-02-11 01:09:35 +03:00
|
|
|
|
2015-11-07 03:29:54 +03:00
|
|
|
return compound_head(page);
|
2007-05-07 01:49:41 +04:00
|
|
|
}
|
|
|
|
|
2016-01-16 03:52:56 +03:00
|
|
|
void __put_page(struct page *page);
|
|
|
|
|
2006-08-14 10:24:27 +04:00
|
|
|
void put_pages_list(struct list_head *pages);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2006-03-22 11:08:05 +03:00
|
|
|
void split_page(struct page *page, unsigned int order);
|
|
|
|
|
2006-12-07 07:33:32 +03:00
|
|
|
/*
|
|
|
|
* Compound pages have a destructor function. Provide a
|
|
|
|
* prototype for that function and accessor functions.
|
2015-11-07 03:29:50 +03:00
|
|
|
* These are _only_ valid on the head of a compound page.
|
2006-12-07 07:33:32 +03:00
|
|
|
*/
|
2015-11-07 03:29:50 +03:00
|
|
|
typedef void compound_page_dtor(struct page *);
|
|
|
|
|
|
|
|
/* Keep the enum in sync with compound_page_dtors array in mm/page_alloc.c */
|
|
|
|
enum compound_dtor_id {
|
|
|
|
NULL_COMPOUND_DTOR,
|
|
|
|
COMPOUND_PAGE_DTOR,
|
|
|
|
#ifdef CONFIG_HUGETLB_PAGE
|
|
|
|
HUGETLB_PAGE_DTOR,
|
2016-01-16 03:54:17 +03:00
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
|
|
|
TRANSHUGE_PAGE_DTOR,
|
2015-11-07 03:29:50 +03:00
|
|
|
#endif
|
|
|
|
NR_COMPOUND_DTORS,
|
|
|
|
};
|
|
|
|
extern compound_page_dtor * const compound_page_dtors[];
|
2006-12-07 07:33:32 +03:00
|
|
|
|
|
|
|
static inline void set_compound_page_dtor(struct page *page,
|
2015-11-07 03:29:50 +03:00
|
|
|
enum compound_dtor_id compound_dtor)
|
2006-12-07 07:33:32 +03:00
|
|
|
{
|
2015-11-07 03:29:50 +03:00
|
|
|
VM_BUG_ON_PAGE(compound_dtor >= NR_COMPOUND_DTORS, page);
|
|
|
|
page[1].compound_dtor = compound_dtor;
|
2006-12-07 07:33:32 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline compound_page_dtor *get_compound_page_dtor(struct page *page)
|
|
|
|
{
|
2015-11-07 03:29:50 +03:00
|
|
|
VM_BUG_ON_PAGE(page[1].compound_dtor >= NR_COMPOUND_DTORS, page);
|
|
|
|
return compound_page_dtors[page[1].compound_dtor];
|
2006-12-07 07:33:32 +03:00
|
|
|
}
|
|
|
|
|
2015-11-07 03:29:57 +03:00
|
|
|
static inline unsigned int compound_order(struct page *page)
|
2007-05-07 01:49:39 +04:00
|
|
|
{
|
2007-05-07 01:49:40 +04:00
|
|
|
if (!PageHead(page))
|
2007-05-07 01:49:39 +04:00
|
|
|
return 0;
|
2015-02-12 02:24:46 +03:00
|
|
|
return page[1].compound_order;
|
2007-05-07 01:49:39 +04:00
|
|
|
}
|
|
|
|
|
2015-11-07 03:29:50 +03:00
|
|
|
static inline void set_compound_order(struct page *page, unsigned int order)
|
2007-05-07 01:49:39 +04:00
|
|
|
{
|
2015-02-12 02:24:46 +03:00
|
|
|
page[1].compound_order = order;
|
2007-05-07 01:49:39 +04:00
|
|
|
}
|
|
|
|
|
2016-01-16 03:54:17 +03:00
|
|
|
void free_compound_page(struct page *page);
|
|
|
|
|
2011-01-21 10:49:56 +03:00
|
|
|
#ifdef CONFIG_MMU
|
2011-01-14 02:46:37 +03:00
|
|
|
/*
|
|
|
|
* Do pte_mkwrite, but only if the vma says VM_WRITE. We do this when
|
|
|
|
* servicing faults for write access. In the normal case, do always want
|
|
|
|
* pte_mkwrite. But get_user_pages can cause write faults for mappings
|
|
|
|
* that do not have writing enabled, when used by access_process_vm.
|
|
|
|
*/
|
|
|
|
static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
if (likely(vma->vm_flags & VM_WRITE))
|
|
|
|
pte = pte_mkwrite(pte);
|
|
|
|
return pte;
|
|
|
|
}
|
mm: introduce vm_ops->map_pages()
Here's new version of faultaround patchset. It took a while to tune it
and collect performance data.
First patch adds new callback ->map_pages to vm_operations_struct.
->map_pages() is called when VM asks to map easy accessible pages.
Filesystem should find and map pages associated with offsets from
"pgoff" till "max_pgoff". ->map_pages() is called with page table
locked and must not block. If it's not possible to reach a page without
blocking, filesystem should skip it. Filesystem should use do_set_pte()
to setup page table entry. Pointer to entry associated with offset
"pgoff" is passed in "pte" field in vm_fault structure. Pointers to
entries for other offsets should be calculated relative to "pte".
Currently VM use ->map_pages only on read page fault path. We try to
map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now.
Performance data for different FAULT_AROUND_ORDER is below.
TODO:
- implement ->map_pages() for shmem/tmpfs;
- modify get_user_pages() to be able to use ->map_pages() and implement
mmap(MAP_POPULATE|MAP_NONBLOCK) on top.
=========================================================================
Tested on 4-socket machine (120 threads) with 128GiB of RAM.
Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is
somewhere between 3 and 5. Let's say 4 :)
Linux build (make -j60)
FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9
minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485
time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358
Linux rebuild (make -j60)
FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9
minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643
time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095
Git test suite (make -j60 test)
FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9
minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515
time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413
Two synthetic tests: access every word in file in sequential/random order.
It doesn't improve much after FAULT_AROUND_ORDER == 4.
Sequential access 16GiB file
FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9
1 thread
minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282
time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856
8 threads
minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339
time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528
32 threads
minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200
time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797
60 threads
minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217
time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902
120 threads
minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862
time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622
Random access 1GiB file
1 thread
minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222
time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994
8 threads
minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384
time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804
32 threads
minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881
time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690
60 threads
minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691
time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273
120 threads
minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010
time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594
Touch only one page in page table in 16GiB file
FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9
1 thread
minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237
time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386
8 threads
minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596
time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984
32 threads
minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183
time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559
60 threads
minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825
time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938
120 threads
minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164
time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125
This patch (of 2):
Introduce new vm_ops callback ->map_pages() and uses it for mapping easy
accessible pages around fault address.
On read page fault, if filesystem provides ->map_pages(), we try to map up
to FAULT_AROUND_PAGES pages around page fault address in hope to reduce
number of minor page faults.
We call ->map_pages first and use ->fault() as fallback if page by the
offset is not ready to be mapped (cold page cache or something).
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ning Qu <quning@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08 02:37:18 +04:00
|
|
|
|
2016-12-15 02:06:58 +03:00
|
|
|
int alloc_set_pte(struct vm_fault *vmf, struct mem_cgroup *memcg,
|
2016-07-27 01:25:23 +03:00
|
|
|
struct page *page);
|
2016-12-15 02:07:21 +03:00
|
|
|
int finish_fault(struct vm_fault *vmf);
|
2016-12-15 02:07:39 +03:00
|
|
|
int finish_mkwrite_fault(struct vm_fault *vmf);
|
2011-01-21 10:49:56 +03:00
|
|
|
#endif
|
2011-01-14 02:46:37 +03:00
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
* Multiple processes may "see" the same page. E.g. for untouched
|
|
|
|
* mappings of /dev/null, all processes see the same page full of
|
|
|
|
* zeroes, and text pages of executables and shared libraries have
|
|
|
|
* only one copy in memory, at most, normally.
|
|
|
|
*
|
|
|
|
* For the non-reserved pages, page_count(page) denotes a reference count.
|
2005-09-21 20:55:38 +04:00
|
|
|
* page_count() == 0 means the page is free. page->lru is then used for
|
|
|
|
* freelist management in the buddy allocator.
|
2006-09-26 10:31:35 +04:00
|
|
|
* page_count() > 0 means the page has been allocated.
|
2005-04-17 02:20:36 +04:00
|
|
|
*
|
2006-09-26 10:31:35 +04:00
|
|
|
* Pages are allocated by the slab allocator in order to provide memory
|
|
|
|
* to kmalloc and kmem_cache_alloc. In this case, the management of the
|
|
|
|
* page, and the fields in 'struct page' are the responsibility of mm/slab.c
|
|
|
|
* unless a particular usage is carefully commented. (the responsibility of
|
|
|
|
* freeing the kmalloc memory is the caller's, of course).
|
2005-04-17 02:20:36 +04:00
|
|
|
*
|
2006-09-26 10:31:35 +04:00
|
|
|
* A page may be used by anyone else who does a __get_free_page().
|
|
|
|
* In this case, page_count still tracks the references, and should only
|
|
|
|
* be used through the normal accessor functions. The top bits of page->flags
|
|
|
|
* and page->virtual store page management information, but all other fields
|
|
|
|
* are unused and could be used privately, carefully. The management of this
|
|
|
|
* page is the responsibility of the one who allocated it, and those who have
|
|
|
|
* subsequently been given references to it.
|
|
|
|
*
|
|
|
|
* The other pages (we may call them "pagecache pages") are completely
|
2005-04-17 02:20:36 +04:00
|
|
|
* managed by the Linux memory manager: I/O, buffers, swapping etc.
|
|
|
|
* The following discussion applies only to them.
|
|
|
|
*
|
2006-09-26 10:31:35 +04:00
|
|
|
* A pagecache page contains an opaque `private' member, which belongs to the
|
|
|
|
* page's address_space. Usually, this is the address of a circular list of
|
|
|
|
* the page's disk buffers. PG_private must be set to tell the VM to call
|
|
|
|
* into the filesystem to release these pages.
|
2005-04-17 02:20:36 +04:00
|
|
|
*
|
2006-09-26 10:31:35 +04:00
|
|
|
* A page may belong to an inode's memory mapping. In this case, page->mapping
|
|
|
|
* is the pointer to the inode, and page->index is the file offset of the page,
|
2016-04-01 15:29:48 +03:00
|
|
|
* in units of PAGE_SIZE.
|
2005-04-17 02:20:36 +04:00
|
|
|
*
|
2006-09-26 10:31:35 +04:00
|
|
|
* If pagecache pages are not associated with an inode, they are said to be
|
|
|
|
* anonymous pages. These may become associated with the swapcache, and in that
|
|
|
|
* case PG_swapcache is set, and page->private is an offset into the swapcache.
|
2005-04-17 02:20:36 +04:00
|
|
|
*
|
2006-09-26 10:31:35 +04:00
|
|
|
* In either case (swapcache or inode backed), the pagecache itself holds one
|
|
|
|
* reference to the page. Setting PG_private should also increment the
|
|
|
|
* refcount. The each user mapping also has a reference to the page.
|
2005-04-17 02:20:36 +04:00
|
|
|
*
|
2006-09-26 10:31:35 +04:00
|
|
|
* The pagecache pages are stored in a per-mapping radix tree, which is
|
|
|
|
* rooted at mapping->page_tree, and indexed by offset.
|
|
|
|
* Where 2.4 and early 2.6 kernels kept dirty/clean pages in per-address_space
|
|
|
|
* lists, we instead now tag pages as dirty/writeback in the radix tree.
|
2005-04-17 02:20:36 +04:00
|
|
|
*
|
2006-09-26 10:31:35 +04:00
|
|
|
* All pagecache pages may be subject to I/O:
|
2005-04-17 02:20:36 +04:00
|
|
|
* - inode pages may need to be read from disk,
|
|
|
|
* - inode pages which have been modified and are MAP_SHARED may need
|
2006-09-26 10:31:35 +04:00
|
|
|
* to be written back to the inode on disk,
|
|
|
|
* - anonymous pages (including MAP_PRIVATE file mappings) which have been
|
|
|
|
* modified may need to be swapped out to swap space and (later) to be read
|
|
|
|
* back into memory.
|
2005-04-17 02:20:36 +04:00
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The zone field is never updated after free_area_init_core()
|
|
|
|
* sets it, so none of the operations on it need to be atomic.
|
|
|
|
*/
|
2005-06-23 11:07:40 +04:00
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
/* Page flags: | [SECTION] | [NODE] | ZONE | [LAST_CPUPID] | ... | FLAGS | */
|
2005-11-05 19:25:53 +03:00
|
|
|
#define SECTIONS_PGOFF ((sizeof(unsigned long)*8) - SECTIONS_WIDTH)
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
#define NODES_PGOFF (SECTIONS_PGOFF - NODES_WIDTH)
|
|
|
|
#define ZONES_PGOFF (NODES_PGOFF - ZONES_WIDTH)
|
2013-10-07 14:29:20 +04:00
|
|
|
#define LAST_CPUPID_PGOFF (ZONES_PGOFF - LAST_CPUPID_WIDTH)
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
|
2005-06-23 11:07:40 +04:00
|
|
|
/*
|
2011-03-31 05:57:33 +04:00
|
|
|
* Define the bit shifts to access each section. For non-existent
|
2005-06-23 11:07:40 +04:00
|
|
|
* sections we define the shift as 0; that plus a 0 mask ensures
|
|
|
|
* the compiler will optimise away reference to them.
|
|
|
|
*/
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
#define SECTIONS_PGSHIFT (SECTIONS_PGOFF * (SECTIONS_WIDTH != 0))
|
|
|
|
#define NODES_PGSHIFT (NODES_PGOFF * (NODES_WIDTH != 0))
|
|
|
|
#define ZONES_PGSHIFT (ZONES_PGOFF * (ZONES_WIDTH != 0))
|
2013-10-07 14:29:20 +04:00
|
|
|
#define LAST_CPUPID_PGSHIFT (LAST_CPUPID_PGOFF * (LAST_CPUPID_WIDTH != 0))
|
2005-06-23 11:07:40 +04:00
|
|
|
|
2010-10-27 01:21:37 +04:00
|
|
|
/* NODE:ZONE or SECTION:ZONE is used to ID a zone for the buddy allocator */
|
|
|
|
#ifdef NODE_NOT_IN_PAGE_FLAGS
|
2006-12-07 07:31:45 +03:00
|
|
|
#define ZONEID_SHIFT (SECTIONS_SHIFT + ZONES_SHIFT)
|
2007-02-10 12:43:14 +03:00
|
|
|
#define ZONEID_PGOFF ((SECTIONS_PGOFF < ZONES_PGOFF)? \
|
|
|
|
SECTIONS_PGOFF : ZONES_PGOFF)
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
#else
|
2006-12-07 07:31:45 +03:00
|
|
|
#define ZONEID_SHIFT (NODES_SHIFT + ZONES_SHIFT)
|
2007-02-10 12:43:14 +03:00
|
|
|
#define ZONEID_PGOFF ((NODES_PGOFF < ZONES_PGOFF)? \
|
|
|
|
NODES_PGOFF : ZONES_PGOFF)
|
2006-12-07 07:31:45 +03:00
|
|
|
#endif
|
|
|
|
|
2007-02-10 12:43:14 +03:00
|
|
|
#define ZONEID_PGSHIFT (ZONEID_PGOFF * (ZONEID_SHIFT != 0))
|
2005-06-23 11:07:40 +04:00
|
|
|
|
2008-04-28 13:12:48 +04:00
|
|
|
#if SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS
|
|
|
|
#error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS
|
2005-06-23 11:07:40 +04:00
|
|
|
#endif
|
|
|
|
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
#define ZONES_MASK ((1UL << ZONES_WIDTH) - 1)
|
|
|
|
#define NODES_MASK ((1UL << NODES_WIDTH) - 1)
|
|
|
|
#define SECTIONS_MASK ((1UL << SECTIONS_WIDTH) - 1)
|
numa: use LAST_CPUPID_SHIFT to calculate LAST_CPUPID_MASK
LAST_CPUPID_MASK is calculated using LAST_CPUPID_WIDTH. However
LAST_CPUPID_WIDTH itself can be 0. (when LAST_CPUPID_NOT_IN_PAGE_FLAGS is
set). In such a case LAST_CPUPID_MASK turns out to be 0.
But with recent commit 1ae71d0319: (mm: numa: bugfix for
LAST_CPUPID_NOT_IN_PAGE_FLAGS) if LAST_CPUPID_MASK is 0,
page_cpupid_xchg_last() and page_cpupid_reset_last() causes
page->_last_cpupid to be set to 0.
This causes performance regression. Its almost as if numa_balancing is
off.
Fix LAST_CPUPID_MASK by using LAST_CPUPID_SHIFT instead of
LAST_CPUPID_WIDTH.
Some performance numbers and perf stats with and without the fix.
(3.14-rc6)
----------
numa01
Performance counter stats for '/usr/bin/time -f %e %S %U %c %w -o start_bench.out -a ./numa01':
12,27,462 cs [100.00%]
2,41,957 migrations [100.00%]
1,68,01,713 faults [100.00%]
7,99,35,29,041 cache-misses
98,808 migrate:mm_migrate_pages [100.00%]
1407.690148814 seconds time elapsed
numa02
Performance counter stats for '/usr/bin/time -f %e %S %U %c %w -o start_bench.out -a ./numa02':
63,065 cs [100.00%]
14,364 migrations [100.00%]
2,08,118 faults [100.00%]
25,32,59,404 cache-misses
12 migrate:mm_migrate_pages [100.00%]
63.840827219 seconds time elapsed
(3.14-rc6 with fix)
-------------------
numa01
Performance counter stats for '/usr/bin/time -f %e %S %U %c %w -o start_bench.out -a ./numa01':
9,68,911 cs [100.00%]
1,01,414 migrations [100.00%]
88,38,697 faults [100.00%]
4,42,92,51,042 cache-misses
4,25,060 migrate:mm_migrate_pages [100.00%]
685.965331189 seconds time elapsed
numa02
Performance counter stats for '/usr/bin/time -f %e %S %U %c %w -o start_bench.out -a ./numa02':
17,543 cs [100.00%]
2,962 migrations [100.00%]
1,17,843 faults [100.00%]
11,80,61,644 cache-misses
12,358 migrate:mm_migrate_pages [100.00%]
20.380132343 seconds time elapsed
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-08 02:37:57 +04:00
|
|
|
#define LAST_CPUPID_MASK ((1UL << LAST_CPUPID_SHIFT) - 1)
|
2006-12-07 07:31:45 +03:00
|
|
|
#define ZONEID_MASK ((1UL << ZONEID_SHIFT) - 1)
|
2005-06-23 11:07:40 +04:00
|
|
|
|
2011-07-26 04:11:51 +04:00
|
|
|
static inline enum zone_type page_zonenum(const struct page *page)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
2005-06-23 11:07:40 +04:00
|
|
|
return (page->flags >> ZONES_PGSHIFT) & ZONES_MASK;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
2016-01-16 03:56:17 +03:00
|
|
|
#ifdef CONFIG_ZONE_DEVICE
|
|
|
|
static inline bool is_zone_device_page(const struct page *page)
|
|
|
|
{
|
|
|
|
return page_zonenum(page) == ZONE_DEVICE;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline bool is_zone_device_page(const struct page *page)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
2017-09-09 02:11:46 +03:00
|
|
|
#endif
|
2017-09-09 02:11:43 +03:00
|
|
|
|
2017-09-09 02:12:32 +03:00
|
|
|
#if defined(CONFIG_DEVICE_PRIVATE) || defined(CONFIG_DEVICE_PUBLIC)
|
2017-09-09 02:12:24 +03:00
|
|
|
void put_zone_device_private_or_public_page(struct page *page);
|
2017-09-09 02:12:32 +03:00
|
|
|
DECLARE_STATIC_KEY_FALSE(device_private_key);
|
|
|
|
#define IS_HMM_ENABLED static_branch_unlikely(&device_private_key)
|
|
|
|
static inline bool is_device_private_page(const struct page *page);
|
|
|
|
static inline bool is_device_public_page(const struct page *page);
|
|
|
|
#else /* CONFIG_DEVICE_PRIVATE || CONFIG_DEVICE_PUBLIC */
|
2017-09-09 02:12:24 +03:00
|
|
|
static inline void put_zone_device_private_or_public_page(struct page *page)
|
2017-09-09 02:11:43 +03:00
|
|
|
{
|
|
|
|
}
|
2017-09-09 02:12:32 +03:00
|
|
|
#define IS_HMM_ENABLED 0
|
|
|
|
static inline bool is_device_private_page(const struct page *page)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
static inline bool is_device_public_page(const struct page *page)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
2017-09-09 02:12:24 +03:00
|
|
|
#endif /* CONFIG_DEVICE_PRIVATE || CONFIG_DEVICE_PUBLIC */
|
2016-01-16 03:56:17 +03:00
|
|
|
|
2017-09-09 02:11:46 +03:00
|
|
|
|
2016-01-16 03:56:55 +03:00
|
|
|
static inline void get_page(struct page *page)
|
|
|
|
{
|
|
|
|
page = compound_head(page);
|
|
|
|
/*
|
|
|
|
* Getting a normal page or the head of a compound page
|
2016-05-20 03:10:49 +03:00
|
|
|
* requires to already have an elevated page->_refcount.
|
2016-01-16 03:56:55 +03:00
|
|
|
*/
|
2016-03-18 00:19:26 +03:00
|
|
|
VM_BUG_ON_PAGE(page_ref_count(page) <= 0, page);
|
|
|
|
page_ref_inc(page);
|
2016-01-16 03:56:55 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void put_page(struct page *page)
|
|
|
|
{
|
|
|
|
page = compound_head(page);
|
|
|
|
|
2017-09-09 02:11:46 +03:00
|
|
|
/*
|
|
|
|
* For private device pages we need to catch refcount transition from
|
|
|
|
* 2 to 1, when refcount reach one it means the private device page is
|
|
|
|
* free and we need to inform the device driver through callback. See
|
|
|
|
* include/linux/memremap.h and HMM for details.
|
|
|
|
*/
|
2017-09-09 02:12:32 +03:00
|
|
|
if (IS_HMM_ENABLED && unlikely(is_device_private_page(page) ||
|
|
|
|
unlikely(is_device_public_page(page)))) {
|
2017-09-09 02:12:24 +03:00
|
|
|
put_zone_device_private_or_public_page(page);
|
2017-09-09 02:11:46 +03:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2016-01-16 03:56:55 +03:00
|
|
|
if (put_page_testzero(page))
|
|
|
|
__put_page(page);
|
|
|
|
}
|
|
|
|
|
2013-02-23 04:35:21 +04:00
|
|
|
#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
|
|
|
|
#define SECTION_IN_PAGE_FLAGS
|
|
|
|
#endif
|
|
|
|
|
2006-12-07 07:31:45 +03:00
|
|
|
/*
|
2013-09-12 01:22:35 +04:00
|
|
|
* The identification function is mainly used by the buddy allocator for
|
|
|
|
* determining if two pages could be buddies. We are not really identifying
|
|
|
|
* the zone since we could be using the section number id if we do not have
|
|
|
|
* node id available in page flags.
|
|
|
|
* We only guarantee that it will return the same value for two combinable
|
|
|
|
* pages in a zone.
|
2006-12-07 07:31:45 +03:00
|
|
|
*/
|
2006-06-23 13:03:01 +04:00
|
|
|
static inline int page_zone_id(struct page *page)
|
|
|
|
{
|
2006-12-07 07:31:45 +03:00
|
|
|
return (page->flags >> ZONEID_PGSHIFT) & ZONEID_MASK;
|
2005-06-23 11:07:40 +04:00
|
|
|
}
|
|
|
|
|
2006-12-07 07:33:03 +03:00
|
|
|
static inline int zone_to_nid(struct zone *zone)
|
2006-09-26 10:31:55 +04:00
|
|
|
{
|
2006-09-27 12:50:08 +04:00
|
|
|
#ifdef CONFIG_NUMA
|
|
|
|
return zone->node;
|
|
|
|
#else
|
|
|
|
return 0;
|
|
|
|
#endif
|
2006-09-26 10:31:55 +04:00
|
|
|
}
|
|
|
|
|
2006-12-07 07:31:45 +03:00
|
|
|
#ifdef NODE_NOT_IN_PAGE_FLAGS
|
2011-07-26 04:11:51 +04:00
|
|
|
extern int page_to_nid(const struct page *page);
|
2006-12-07 07:31:45 +03:00
|
|
|
#else
|
2011-07-26 04:11:51 +04:00
|
|
|
static inline int page_to_nid(const struct page *page)
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
{
|
2006-12-07 07:31:45 +03:00
|
|
|
return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
}
|
2006-12-07 07:31:45 +03:00
|
|
|
#endif
|
|
|
|
|
2012-11-12 13:06:20 +04:00
|
|
|
#ifdef CONFIG_NUMA_BALANCING
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int cpu_pid_to_cpupid(int cpu, int pid)
|
2012-11-12 13:06:20 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return ((cpu & LAST__CPU_MASK) << LAST__PID_SHIFT) | (pid & LAST__PID_MASK);
|
2012-11-12 13:06:20 +04:00
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int cpupid_to_pid(int cpupid)
|
2012-11-12 13:06:20 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return cpupid & LAST__PID_MASK;
|
2012-11-12 13:06:20 +04:00
|
|
|
}
|
2013-10-07 14:29:07 +04:00
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int cpupid_to_cpu(int cpupid)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return (cpupid >> LAST__PID_SHIFT) & LAST__CPU_MASK;
|
2013-10-07 14:29:07 +04:00
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int cpupid_to_nid(int cpupid)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return cpu_to_node(cpupid_to_cpu(cpupid));
|
2013-10-07 14:29:07 +04:00
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline bool cpupid_pid_unset(int cpupid)
|
2012-11-12 13:06:20 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return cpupid_to_pid(cpupid) == (-1 & LAST__PID_MASK);
|
2013-10-07 14:29:07 +04:00
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline bool cpupid_cpu_unset(int cpupid)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return cpupid_to_cpu(cpupid) == (-1 & LAST__CPU_MASK);
|
2013-10-07 14:29:07 +04:00
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:21 +04:00
|
|
|
static inline bool __cpupid_match_pid(pid_t task_pid, int cpupid)
|
|
|
|
{
|
|
|
|
return (task_pid & LAST__PID_MASK) == cpupid_to_pid(cpupid);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define cpupid_match_pid(task, cpupid) __cpupid_match_pid(task->pid, cpupid)
|
2013-10-07 14:29:20 +04:00
|
|
|
#ifdef LAST_CPUPID_NOT_IN_PAGE_FLAGS
|
|
|
|
static inline int page_cpupid_xchg_last(struct page *page, int cpupid)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
When doing some numa tests on powerpc, I triggered an oops bug. I find
it is caused by using page->_last_cpupid. It should be initialized as
"-1 & LAST_CPUPID_MASK", but not "-1". Otherwise, in task_numa_fault(),
we will miss the checking (last_cpupid == (-1 & LAST_CPUPID_MASK)). And
finally cause an oops bug in task_numa_group(), since the online cpu is
less than possible cpu. This happen with CONFIG_SPARSE_VMEMMAP disabled
Call trace:
SMP NR_CPUS=64 NUMA PowerNV
Modules linked in:
CPU: 24 PID: 804 Comm: systemd-udevd Not tainted3.13.0-rc1+ #32
task: c000001e2746aa80 ti: c000001e32c50000 task.ti:c000001e32c50000
REGS: c000001e32c53510 TRAP: 0300 Not tainted(3.13.0-rc1+)
MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR:28024424 XER: 20000000
CFAR: c000000000009324 DAR: 7265717569726857 DSISR:40000000 SOFTE: 1
NIP .task_numa_fault+0x1470/0x2370
LR .task_numa_fault+0x1468/0x2370
Call Trace:
.task_numa_fault+0x1468/0x2370 (unreliable)
.do_numa_page+0x480/0x4a0
.handle_mm_fault+0x4ec/0xc90
.do_page_fault+0x3a8/0x890
handle_page_fault+0x10/0x30
Instruction dump:
3c82fefb 3884b138 48d9cff1 60000000 48000574 3c62fefb3863af78 3c82fefb
3884b138 48d9cfd5 60000000 e93f0100 <812902e4> 7d2907b45529063e 7d2a07b4
---[ end trace 15f2510da5ae07cf ]---
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04 03:38:39 +04:00
|
|
|
return xchg(&page->_last_cpupid, cpupid & LAST_CPUPID_MASK);
|
2013-10-07 14:29:07 +04:00
|
|
|
}
|
2013-10-07 14:29:20 +04:00
|
|
|
|
|
|
|
static inline int page_cpupid_last(struct page *page)
|
|
|
|
{
|
|
|
|
return page->_last_cpupid;
|
|
|
|
}
|
|
|
|
static inline void page_cpupid_reset_last(struct page *page)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
When doing some numa tests on powerpc, I triggered an oops bug. I find
it is caused by using page->_last_cpupid. It should be initialized as
"-1 & LAST_CPUPID_MASK", but not "-1". Otherwise, in task_numa_fault(),
we will miss the checking (last_cpupid == (-1 & LAST_CPUPID_MASK)). And
finally cause an oops bug in task_numa_group(), since the online cpu is
less than possible cpu. This happen with CONFIG_SPARSE_VMEMMAP disabled
Call trace:
SMP NR_CPUS=64 NUMA PowerNV
Modules linked in:
CPU: 24 PID: 804 Comm: systemd-udevd Not tainted3.13.0-rc1+ #32
task: c000001e2746aa80 ti: c000001e32c50000 task.ti:c000001e32c50000
REGS: c000001e32c53510 TRAP: 0300 Not tainted(3.13.0-rc1+)
MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR:28024424 XER: 20000000
CFAR: c000000000009324 DAR: 7265717569726857 DSISR:40000000 SOFTE: 1
NIP .task_numa_fault+0x1470/0x2370
LR .task_numa_fault+0x1468/0x2370
Call Trace:
.task_numa_fault+0x1468/0x2370 (unreliable)
.do_numa_page+0x480/0x4a0
.handle_mm_fault+0x4ec/0xc90
.do_page_fault+0x3a8/0x890
handle_page_fault+0x10/0x30
Instruction dump:
3c82fefb 3884b138 48d9cff1 60000000 48000574 3c62fefb3863af78 3c82fefb
3884b138 48d9cfd5 60000000 e93f0100 <812902e4> 7d2907b45529063e 7d2a07b4
---[ end trace 15f2510da5ae07cf ]---
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04 03:38:39 +04:00
|
|
|
page->_last_cpupid = -1 & LAST_CPUPID_MASK;
|
2012-11-12 13:06:20 +04:00
|
|
|
}
|
|
|
|
#else
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int page_cpupid_last(struct page *page)
|
2013-02-23 04:34:32 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return (page->flags >> LAST_CPUPID_PGSHIFT) & LAST_CPUPID_MASK;
|
2013-02-23 04:34:32 +04:00
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
extern int page_cpupid_xchg_last(struct page *page, int cpupid);
|
2013-02-23 04:34:32 +04:00
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline void page_cpupid_reset_last(struct page *page)
|
2013-02-23 04:34:32 +04:00
|
|
|
{
|
2016-05-20 03:13:53 +03:00
|
|
|
page->flags |= LAST_CPUPID_MASK << LAST_CPUPID_PGSHIFT;
|
2013-02-23 04:34:32 +04:00
|
|
|
}
|
2013-10-07 14:29:20 +04:00
|
|
|
#endif /* LAST_CPUPID_NOT_IN_PAGE_FLAGS */
|
|
|
|
#else /* !CONFIG_NUMA_BALANCING */
|
|
|
|
static inline int page_cpupid_xchg_last(struct page *page, int cpupid)
|
2012-11-12 13:06:20 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return page_to_nid(page); /* XXX */
|
2012-11-12 13:06:20 +04:00
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int page_cpupid_last(struct page *page)
|
2012-11-12 13:06:20 +04:00
|
|
|
{
|
2013-10-07 14:29:20 +04:00
|
|
|
return page_to_nid(page); /* XXX */
|
2012-11-12 13:06:20 +04:00
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int cpupid_to_nid(int cpupid)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int cpupid_to_pid(int cpupid)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int cpupid_to_cpu(int cpupid)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline int cpu_pid_to_cpupid(int nid, int pid)
|
|
|
|
{
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool cpupid_pid_unset(int cpupid)
|
2013-10-07 14:29:07 +04:00
|
|
|
{
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2013-10-07 14:29:20 +04:00
|
|
|
static inline void page_cpupid_reset_last(struct page *page)
|
2012-11-12 13:06:20 +04:00
|
|
|
{
|
|
|
|
}
|
2013-10-07 14:29:21 +04:00
|
|
|
|
|
|
|
static inline bool cpupid_match_pid(struct task_struct *task, int cpupid)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
2013-10-07 14:29:20 +04:00
|
|
|
#endif /* CONFIG_NUMA_BALANCING */
|
2012-11-12 13:06:20 +04:00
|
|
|
|
2011-07-26 04:11:51 +04:00
|
|
|
static inline struct zone *page_zone(const struct page *page)
|
2006-12-07 07:31:45 +03:00
|
|
|
{
|
|
|
|
return &NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)];
|
|
|
|
}
|
|
|
|
|
mm, vmstat: add infrastructure for per-node vmstats
Patchset: "Move LRU page reclaim from zones to nodes v9"
This series moves LRUs from the zones to the node. While this is a
current rebase, the test results were based on mmotm as of June 23rd.
Conceptually, this series is simple but there are a lot of details.
Some of the broad motivations for this are;
1. The residency of a page partially depends on what zone the page was
allocated from. This is partially combatted by the fair zone allocation
policy but that is a partial solution that introduces overhead in the
page allocator paths.
2. Currently, reclaim on node 0 behaves slightly different to node 1. For
example, direct reclaim scans in zonelist order and reclaims even if
the zone is over the high watermark regardless of the age of pages
in that LRU. Kswapd on the other hand starts reclaim on the highest
unbalanced zone. A difference in distribution of file/anon pages due
to when they were allocated results can result in a difference in
again. While the fair zone allocation policy mitigates some of the
problems here, the page reclaim results on a multi-zone node will
always be different to a single-zone node.
it was scheduled on as a result.
3. kswapd and the page allocator scan zones in the opposite order to
avoid interfering with each other but it's sensitive to timing. This
mitigates the page allocator using pages that were allocated very recently
in the ideal case but it's sensitive to timing. When kswapd is allocating
from lower zones then it's great but during the rebalancing of the highest
zone, the page allocator and kswapd interfere with each other. It's worse
if the highest zone is small and difficult to balance.
4. slab shrinkers are node-based which makes it harder to identify the exact
relationship between slab reclaim and LRU reclaim.
The reason we have zone-based reclaim is that we used to have
large highmem zones in common configurations and it was necessary
to quickly find ZONE_NORMAL pages for reclaim. Today, this is much
less of a concern as machines with lots of memory will (or should) use
64-bit kernels. Combinations of 32-bit hardware and 64-bit hardware are
rare. Machines that do use highmem should have relatively low highmem:lowmem
ratios than we worried about in the past.
Conceptually, moving to node LRUs should be easier to understand. The
page allocator plays fewer tricks to game reclaim and reclaim behaves
similarly on all nodes.
The series has been tested on a 16 core UMA machine and a 2-socket 48
core NUMA machine. The UMA results are presented in most cases as the NUMA
machine behaved similarly.
pagealloc
---------
This is a microbenchmark that shows the benefit of removing the fair zone
allocation policy. It was tested uip to order-4 but only orders 0 and 1 are
shown as the other orders were comparable.
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v9
Min total-odr0-1 490.00 ( 0.00%) 457.00 ( 6.73%)
Min total-odr0-2 347.00 ( 0.00%) 329.00 ( 5.19%)
Min total-odr0-4 288.00 ( 0.00%) 273.00 ( 5.21%)
Min total-odr0-8 251.00 ( 0.00%) 239.00 ( 4.78%)
Min total-odr0-16 234.00 ( 0.00%) 222.00 ( 5.13%)
Min total-odr0-32 223.00 ( 0.00%) 211.00 ( 5.38%)
Min total-odr0-64 217.00 ( 0.00%) 208.00 ( 4.15%)
Min total-odr0-128 214.00 ( 0.00%) 204.00 ( 4.67%)
Min total-odr0-256 250.00 ( 0.00%) 230.00 ( 8.00%)
Min total-odr0-512 271.00 ( 0.00%) 269.00 ( 0.74%)
Min total-odr0-1024 291.00 ( 0.00%) 282.00 ( 3.09%)
Min total-odr0-2048 303.00 ( 0.00%) 296.00 ( 2.31%)
Min total-odr0-4096 311.00 ( 0.00%) 309.00 ( 0.64%)
Min total-odr0-8192 316.00 ( 0.00%) 314.00 ( 0.63%)
Min total-odr0-16384 317.00 ( 0.00%) 315.00 ( 0.63%)
Min total-odr1-1 742.00 ( 0.00%) 712.00 ( 4.04%)
Min total-odr1-2 562.00 ( 0.00%) 530.00 ( 5.69%)
Min total-odr1-4 457.00 ( 0.00%) 433.00 ( 5.25%)
Min total-odr1-8 411.00 ( 0.00%) 381.00 ( 7.30%)
Min total-odr1-16 381.00 ( 0.00%) 356.00 ( 6.56%)
Min total-odr1-32 372.00 ( 0.00%) 346.00 ( 6.99%)
Min total-odr1-64 372.00 ( 0.00%) 343.00 ( 7.80%)
Min total-odr1-128 375.00 ( 0.00%) 351.00 ( 6.40%)
Min total-odr1-256 379.00 ( 0.00%) 351.00 ( 7.39%)
Min total-odr1-512 385.00 ( 0.00%) 355.00 ( 7.79%)
Min total-odr1-1024 386.00 ( 0.00%) 358.00 ( 7.25%)
Min total-odr1-2048 390.00 ( 0.00%) 362.00 ( 7.18%)
Min total-odr1-4096 390.00 ( 0.00%) 362.00 ( 7.18%)
Min total-odr1-8192 388.00 ( 0.00%) 363.00 ( 6.44%)
This shows a steady improvement throughout. The primary benefit is from
reduced system CPU usage which is obvious from the overall times;
4.7.0-rc4 4.7.0-rc4
mmotm-20160623nodelru-v8
User 189.19 191.80
System 2604.45 2533.56
Elapsed 2855.30 2786.39
The vmstats also showed that the fair zone allocation policy was definitely
removed as can be seen here;
4.7.0-rc3 4.7.0-rc3
mmotm-20160623 nodelru-v8
DMA32 allocs 28794729769 0
Normal allocs 48432501431 77227309877
Movable allocs 0 0
tiobench on ext4
----------------
tiobench is a benchmark that artifically benefits if old pages remain resident
while new pages get reclaimed. The fair zone allocation policy mitigates this
problem so pages age fairly. While the benchmark has problems, it is important
that tiobench performance remains constant as it implies that page aging
problems that the fair zone allocation policy fixes are not re-introduced.
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v9
Min PotentialReadSpeed 89.65 ( 0.00%) 90.21 ( 0.62%)
Min SeqRead-MB/sec-1 82.68 ( 0.00%) 82.01 ( -0.81%)
Min SeqRead-MB/sec-2 72.76 ( 0.00%) 72.07 ( -0.95%)
Min SeqRead-MB/sec-4 75.13 ( 0.00%) 74.92 ( -0.28%)
Min SeqRead-MB/sec-8 64.91 ( 0.00%) 65.19 ( 0.43%)
Min SeqRead-MB/sec-16 62.24 ( 0.00%) 62.22 ( -0.03%)
Min RandRead-MB/sec-1 0.88 ( 0.00%) 0.88 ( 0.00%)
Min RandRead-MB/sec-2 0.95 ( 0.00%) 0.92 ( -3.16%)
Min RandRead-MB/sec-4 1.43 ( 0.00%) 1.34 ( -6.29%)
Min RandRead-MB/sec-8 1.61 ( 0.00%) 1.60 ( -0.62%)
Min RandRead-MB/sec-16 1.80 ( 0.00%) 1.90 ( 5.56%)
Min SeqWrite-MB/sec-1 76.41 ( 0.00%) 76.85 ( 0.58%)
Min SeqWrite-MB/sec-2 74.11 ( 0.00%) 73.54 ( -0.77%)
Min SeqWrite-MB/sec-4 80.05 ( 0.00%) 80.13 ( 0.10%)
Min SeqWrite-MB/sec-8 72.88 ( 0.00%) 73.20 ( 0.44%)
Min SeqWrite-MB/sec-16 75.91 ( 0.00%) 76.44 ( 0.70%)
Min RandWrite-MB/sec-1 1.18 ( 0.00%) 1.14 ( -3.39%)
Min RandWrite-MB/sec-2 1.02 ( 0.00%) 1.03 ( 0.98%)
Min RandWrite-MB/sec-4 1.05 ( 0.00%) 0.98 ( -6.67%)
Min RandWrite-MB/sec-8 0.89 ( 0.00%) 0.92 ( 3.37%)
Min RandWrite-MB/sec-16 0.92 ( 0.00%) 0.93 ( 1.09%)
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 approx-v9
User 645.72 525.90
System 403.85 331.75
Elapsed 6795.36 6783.67
This shows that the series has little or not impact on tiobench which is
desirable and a reduction in system CPU usage. It indicates that the fair
zone allocation policy was removed in a manner that didn't reintroduce
one class of page aging bug. There were only minor differences in overall
reclaim activity
4.7.0-rc4 4.7.0-rc4
mmotm-20160623nodelru-v8
Minor Faults 645838 647465
Major Faults 573 640
Swap Ins 0 0
Swap Outs 0 0
DMA allocs 0 0
DMA32 allocs 46041453 44190646
Normal allocs 78053072 79887245
Movable allocs 0 0
Allocation stalls 24 67
Stall zone DMA 0 0
Stall zone DMA32 0 0
Stall zone Normal 0 2
Stall zone HighMem 0 0
Stall zone Movable 0 65
Direct pages scanned 10969 30609
Kswapd pages scanned 93375144 93492094
Kswapd pages reclaimed 93372243 93489370
Direct pages reclaimed 10969 30609
Kswapd efficiency 99% 99%
Kswapd velocity 13741.015 13781.934
Direct efficiency 100% 100%
Direct velocity 1.614 4.512
Percentage direct scans 0% 0%
kswapd activity was roughly comparable. There were differences in direct
reclaim activity but negligible in the context of the overall workload
(velocity of 4 pages per second with the patches applied, 1.6 pages per
second in the baseline kernel).
pgbench read-only large configuration on ext4
---------------------------------------------
pgbench is a database benchmark that can be sensitive to page reclaim
decisions. This also checks if removing the fair zone allocation policy
is safe
pgbench Transactions
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v8
Hmean 1 188.26 ( 0.00%) 189.78 ( 0.81%)
Hmean 5 330.66 ( 0.00%) 328.69 ( -0.59%)
Hmean 12 370.32 ( 0.00%) 380.72 ( 2.81%)
Hmean 21 368.89 ( 0.00%) 369.00 ( 0.03%)
Hmean 30 382.14 ( 0.00%) 360.89 ( -5.56%)
Hmean 32 428.87 ( 0.00%) 432.96 ( 0.95%)
Negligible differences again. As with tiobench, overall reclaim activity
was comparable.
bonnie++ on ext4
----------------
No interesting performance difference, negligible differences on reclaim
stats.
paralleldd on ext4
------------------
This workload uses varying numbers of dd instances to read large amounts of
data from disk.
4.7.0-rc3 4.7.0-rc3
mmotm-20160623 nodelru-v9
Amean Elapsd-1 186.04 ( 0.00%) 189.41 ( -1.82%)
Amean Elapsd-3 192.27 ( 0.00%) 191.38 ( 0.46%)
Amean Elapsd-5 185.21 ( 0.00%) 182.75 ( 1.33%)
Amean Elapsd-7 183.71 ( 0.00%) 182.11 ( 0.87%)
Amean Elapsd-12 180.96 ( 0.00%) 181.58 ( -0.35%)
Amean Elapsd-16 181.36 ( 0.00%) 183.72 ( -1.30%)
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v9
User 1548.01 1552.44
System 8609.71 8515.08
Elapsed 3587.10 3594.54
There is little or no change in performance but some drop in system CPU usage.
4.7.0-rc3 4.7.0-rc3
mmotm-20160623 nodelru-v9
Minor Faults 362662 367360
Major Faults 1204 1143
Swap Ins 22 0
Swap Outs 2855 1029
DMA allocs 0 0
DMA32 allocs 31409797 28837521
Normal allocs 46611853 49231282
Movable allocs 0 0
Direct pages scanned 0 0
Kswapd pages scanned 40845270 40869088
Kswapd pages reclaimed 40830976 40855294
Direct pages reclaimed 0 0
Kswapd efficiency 99% 99%
Kswapd velocity 11386.711 11369.769
Direct efficiency 100% 100%
Direct velocity 0.000 0.000
Percentage direct scans 0% 0%
Page writes by reclaim 2855 1029
Page writes file 0 0
Page writes anon 2855 1029
Page reclaim immediate 771 1628
Sector Reads 293312636 293536360
Sector Writes 18213568 18186480
Page rescued immediate 0 0
Slabs scanned 128257 132747
Direct inode steals 181 56
Kswapd inode steals 59 1131
It basically shows that kswapd was active at roughly the same rate in
both kernels. There was also comparable slab scanning activity and direct
reclaim was avoided in both cases. There appears to be a large difference
in numbers of inodes reclaimed but the workload has few active inodes and
is likely a timing artifact.
stutter
-------
stutter simulates a simple workload. One part uses a lot of anonymous
memory, a second measures mmap latency and a third copies a large file.
The primary metric is checking for mmap latency.
stutter
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v8
Min mmap 16.6283 ( 0.00%) 13.4258 ( 19.26%)
1st-qrtle mmap 54.7570 ( 0.00%) 34.9121 ( 36.24%)
2nd-qrtle mmap 57.3163 ( 0.00%) 46.1147 ( 19.54%)
3rd-qrtle mmap 58.9976 ( 0.00%) 47.1882 ( 20.02%)
Max-90% mmap 59.7433 ( 0.00%) 47.4453 ( 20.58%)
Max-93% mmap 60.1298 ( 0.00%) 47.6037 ( 20.83%)
Max-95% mmap 73.4112 ( 0.00%) 82.8719 (-12.89%)
Max-99% mmap 92.8542 ( 0.00%) 88.8870 ( 4.27%)
Max mmap 1440.6569 ( 0.00%) 121.4201 ( 91.57%)
Mean mmap 59.3493 ( 0.00%) 42.2991 ( 28.73%)
Best99%Mean mmap 57.2121 ( 0.00%) 41.8207 ( 26.90%)
Best95%Mean mmap 55.9113 ( 0.00%) 39.9620 ( 28.53%)
Best90%Mean mmap 55.6199 ( 0.00%) 39.3124 ( 29.32%)
Best50%Mean mmap 53.2183 ( 0.00%) 33.1307 ( 37.75%)
Best10%Mean mmap 45.9842 ( 0.00%) 20.4040 ( 55.63%)
Best5%Mean mmap 43.2256 ( 0.00%) 17.9654 ( 58.44%)
Best1%Mean mmap 32.9388 ( 0.00%) 16.6875 ( 49.34%)
This shows a number of improvements with the worst-case outlier greatly
improved.
Some of the vmstats are interesting
4.7.0-rc4 4.7.0-rc4
mmotm-20160623nodelru-v8
Swap Ins 163 502
Swap Outs 0 0
DMA allocs 0 0
DMA32 allocs 618719206 1381662383
Normal allocs 891235743 564138421
Movable allocs 0 0
Allocation stalls 2603 1
Direct pages scanned 216787 2
Kswapd pages scanned 50719775 41778378
Kswapd pages reclaimed 41541765 41777639
Direct pages reclaimed 209159 0
Kswapd efficiency 81% 99%
Kswapd velocity 16859.554 14329.059
Direct efficiency 96% 0%
Direct velocity 72.061 0.001
Percentage direct scans 0% 0%
Page writes by reclaim 6215049 0
Page writes file 6215049 0
Page writes anon 0 0
Page reclaim immediate 70673 90
Sector Reads 81940800 81680456
Sector Writes 100158984 98816036
Page rescued immediate 0 0
Slabs scanned 1366954 22683
While this is not guaranteed in all cases, this particular test showed
a large reduction in direct reclaim activity. It's also worth noting
that no page writes were issued from reclaim context.
This series is not without its hazards. There are at least three areas
that I'm concerned with even though I could not reproduce any problems in
that area.
1. Reclaim/compaction is going to be affected because the amount of reclaim is
no longer targetted at a specific zone. Compaction works on a per-zone basis
so there is no guarantee that reclaiming a few THP's worth page pages will
have a positive impact on compaction success rates.
2. The Slab/LRU reclaim ratio is affected because the frequency the shrinkers
are called is now different. This may or may not be a problem but if it
is, it'll be because shrinkers are not called enough and some balancing
is required.
3. The anon/file reclaim ratio may be affected. Pages about to be dirtied are
distributed between zones and the fair zone allocation policy used to do
something very similar for anon. The distribution is now different but not
necessarily in any way that matters but it's still worth bearing in mind.
VM statistic counters for reclaim decisions are zone-based. If the kernel
is to reclaim on a per-node basis then we need to track per-node
statistics but there is no infrastructure for that. The most notable
change is that the old node_page_state is renamed to
sum_zone_node_page_state. The new node_page_state takes a pglist_data and
uses per-node stats but none exist yet. There is some renaming such as
vm_stat to vm_zone_stat and the addition of vm_node_stat and the renaming
of mod_state to mod_zone_state. Otherwise, this is mostly a mechanical
patch with no functional change. There is a lot of similarity between the
node and zone helpers which is unfortunate but there was no obvious way of
reusing the code and maintaining type safety.
Link: http://lkml.kernel.org/r/1467970510-21195-2-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-29 01:45:24 +03:00
|
|
|
static inline pg_data_t *page_pgdat(const struct page *page)
|
|
|
|
{
|
|
|
|
return NODE_DATA(page_to_nid(page));
|
|
|
|
}
|
|
|
|
|
2013-02-23 04:35:21 +04:00
|
|
|
#ifdef SECTION_IN_PAGE_FLAGS
|
2011-05-25 04:12:32 +04:00
|
|
|
static inline void set_page_section(struct page *page, unsigned long section)
|
|
|
|
{
|
|
|
|
page->flags &= ~(SECTIONS_MASK << SECTIONS_PGSHIFT);
|
|
|
|
page->flags |= (section & SECTIONS_MASK) << SECTIONS_PGSHIFT;
|
|
|
|
}
|
|
|
|
|
2011-08-17 20:40:33 +04:00
|
|
|
static inline unsigned long page_to_section(const struct page *page)
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
{
|
|
|
|
return (page->flags >> SECTIONS_PGSHIFT) & SECTIONS_MASK;
|
|
|
|
}
|
2008-04-28 13:12:43 +04:00
|
|
|
#endif
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
|
2006-09-26 10:31:13 +04:00
|
|
|
static inline void set_page_zone(struct page *page, enum zone_type zone)
|
2005-06-23 11:07:40 +04:00
|
|
|
{
|
|
|
|
page->flags &= ~(ZONES_MASK << ZONES_PGSHIFT);
|
|
|
|
page->flags |= (zone & ZONES_MASK) << ZONES_PGSHIFT;
|
|
|
|
}
|
2006-09-26 10:31:13 +04:00
|
|
|
|
2005-06-23 11:07:40 +04:00
|
|
|
static inline void set_page_node(struct page *page, unsigned long node)
|
|
|
|
{
|
|
|
|
page->flags &= ~(NODES_MASK << NODES_PGSHIFT);
|
|
|
|
page->flags |= (node & NODES_MASK) << NODES_PGSHIFT;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
2006-12-07 07:31:45 +03:00
|
|
|
|
2006-09-26 10:31:13 +04:00
|
|
|
static inline void set_page_links(struct page *page, enum zone_type zone,
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
unsigned long node, unsigned long pfn)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
2005-06-23 11:07:40 +04:00
|
|
|
set_page_zone(page, zone);
|
|
|
|
set_page_node(page, node);
|
2013-02-23 04:35:21 +04:00
|
|
|
#ifdef SECTION_IN_PAGE_FLAGS
|
[PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[]. This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems. Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.
A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA. When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.
Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous. It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.
Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory. This is what allows the mem_map[]
to be chopped up.
In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags. Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations. However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions. Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.
One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags. It might provide
speed increases on certain platforms and will be stored there if there is
room. But, if out of room, an alternate (theoretically slower) mechanism is
used.
This patch introduces CONFIG_FLATMEM. It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:07:54 +04:00
|
|
|
set_page_section(page, pfn_to_section_nr(pfn));
|
2011-05-25 04:12:32 +04:00
|
|
|
#endif
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
2015-10-02 01:37:02 +03:00
|
|
|
#ifdef CONFIG_MEMCG
|
|
|
|
static inline struct mem_cgroup *page_memcg(struct page *page)
|
|
|
|
{
|
|
|
|
return page->mem_cgroup;
|
|
|
|
}
|
2016-07-29 01:45:10 +03:00
|
|
|
static inline struct mem_cgroup *page_memcg_rcu(struct page *page)
|
|
|
|
{
|
|
|
|
WARN_ON_ONCE(!rcu_read_lock_held());
|
|
|
|
return READ_ONCE(page->mem_cgroup);
|
|
|
|
}
|
2015-10-02 01:37:02 +03:00
|
|
|
#else
|
|
|
|
static inline struct mem_cgroup *page_memcg(struct page *page)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
2016-07-29 01:45:10 +03:00
|
|
|
static inline struct mem_cgroup *page_memcg_rcu(struct page *page)
|
|
|
|
{
|
|
|
|
WARN_ON_ONCE(!rcu_read_lock_held());
|
|
|
|
return NULL;
|
|
|
|
}
|
2015-10-02 01:37:02 +03:00
|
|
|
#endif
|
|
|
|
|
2006-06-30 12:55:32 +04:00
|
|
|
/*
|
|
|
|
* Some inline functions in vmstat.h depend on page_zone()
|
|
|
|
*/
|
|
|
|
#include <linux/vmstat.h>
|
|
|
|
|
2011-07-26 04:11:51 +04:00
|
|
|
static __always_inline void *lowmem_page_address(const struct page *page)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
mm: replace open coded page to virt conversion with page_to_virt()
The open coded conversion from struct page address to virtual address in
lowmem_page_address() involves an intermediate conversion step to pfn
number/physical address. Since the placement of the struct page array
relative to the linear mapping may be completely independent from the
placement of physical RAM (as is that case for arm64 after commit
dfd55ad85e 'arm64: vmemmap: use virtual projection of linear region'),
the conversion to physical address and back again should factor out of
the equation, but unfortunately, the shifting and pointer arithmetic
involved prevent this from happening, and the resulting calculation
essentially subtracts the address of the start of physical memory and
adds it back again, in a way that prevents the compiler from optimizing
it away.
Since the start of physical memory is not a build time constant on arm64,
the resulting conversion involves an unnecessary memory access, which
we would like to get rid of. So replace the open coded conversion with
a call to page_to_virt(), and use the open coded conversion as its
default definition, to be overriden by the architecture, if desired.
The existing arch specific definitions of page_to_virt are all equivalent
to this default definition, so by itself this patch is a no-op.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-18 19:04:57 +03:00
|
|
|
return page_to_virt(page);
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
#if defined(CONFIG_HIGHMEM) && !defined(WANT_PAGE_VIRTUAL)
|
|
|
|
#define HASHED_PAGE_VIRTUAL
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if defined(WANT_PAGE_VIRTUAL)
|
2014-01-22 03:48:47 +04:00
|
|
|
static inline void *page_address(const struct page *page)
|
|
|
|
{
|
|
|
|
return page->virtual;
|
|
|
|
}
|
|
|
|
static inline void set_page_address(struct page *page, void *address)
|
|
|
|
{
|
|
|
|
page->virtual = address;
|
|
|
|
}
|
2005-04-17 02:20:36 +04:00
|
|
|
#define page_address_init() do { } while(0)
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if defined(HASHED_PAGE_VIRTUAL)
|
2011-08-17 16:45:09 +04:00
|
|
|
void *page_address(const struct page *page);
|
2005-04-17 02:20:36 +04:00
|
|
|
void set_page_address(struct page *page, void *virtual);
|
|
|
|
void page_address_init(void);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if !defined(HASHED_PAGE_VIRTUAL) && !defined(WANT_PAGE_VIRTUAL)
|
|
|
|
#define page_address(page) lowmem_page_address(page)
|
|
|
|
#define set_page_address(page, address) do { } while(0)
|
|
|
|
#define page_address_init() do { } while(0)
|
|
|
|
#endif
|
|
|
|
|
2015-04-16 02:14:53 +03:00
|
|
|
extern void *page_rmapping(struct page *page);
|
|
|
|
extern struct anon_vma *page_anon_vma(struct page *page);
|
2013-02-23 04:34:35 +04:00
|
|
|
extern struct address_space *page_mapping(struct page *page);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2012-08-01 03:44:47 +04:00
|
|
|
extern struct address_space *__page_file_mapping(struct page *);
|
|
|
|
|
|
|
|
static inline
|
|
|
|
struct address_space *page_file_mapping(struct page *page)
|
|
|
|
{
|
|
|
|
if (unlikely(PageSwapCache(page)))
|
|
|
|
return __page_file_mapping(page);
|
|
|
|
|
|
|
|
return page->mapping;
|
|
|
|
}
|
|
|
|
|
mm, swap: use offset of swap entry as key of swap cache
This patch is to improve the performance of swap cache operations when
the type of the swap device is not 0. Originally, the whole swap entry
value is used as the key of the swap cache, even though there is one
radix tree for each swap device. If the type of the swap device is not
0, the height of the radix tree of the swap cache will be increased
unnecessary, especially on 64bit architecture. For example, for a 1GB
swap device on the x86_64 architecture, the height of the radix tree of
the swap cache is 11. But if the offset of the swap entry is used as
the key of the swap cache, the height of the radix tree of the swap
cache is 4. The increased height causes unnecessary radix tree
descending and increased cache footprint.
This patch reduces the height of the radix tree of the swap cache via
using the offset of the swap entry instead of the whole swap entry value
as the key of the swap cache. In 32 processes sequential swap out test
case on a Xeon E5 v3 system with RAM disk as swap, the lock contention
for the spinlock of the swap cache is reduced from 20.15% to 12.19%,
when the type of the swap device is 1.
Use the whole swap entry as key,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list: 10.37,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_node_memcg: 9.78,
Use the swap offset as key,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list: 6.25,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_node_memcg: 5.94,
Link: http://lkml.kernel.org/r/1473270649-27229-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 03:00:21 +03:00
|
|
|
extern pgoff_t __page_file_index(struct page *page);
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
* Return the pagecache index of the passed page. Regular pagecache pages
|
mm, swap: use offset of swap entry as key of swap cache
This patch is to improve the performance of swap cache operations when
the type of the swap device is not 0. Originally, the whole swap entry
value is used as the key of the swap cache, even though there is one
radix tree for each swap device. If the type of the swap device is not
0, the height of the radix tree of the swap cache will be increased
unnecessary, especially on 64bit architecture. For example, for a 1GB
swap device on the x86_64 architecture, the height of the radix tree of
the swap cache is 11. But if the offset of the swap entry is used as
the key of the swap cache, the height of the radix tree of the swap
cache is 4. The increased height causes unnecessary radix tree
descending and increased cache footprint.
This patch reduces the height of the radix tree of the swap cache via
using the offset of the swap entry instead of the whole swap entry value
as the key of the swap cache. In 32 processes sequential swap out test
case on a Xeon E5 v3 system with RAM disk as swap, the lock contention
for the spinlock of the swap cache is reduced from 20.15% to 12.19%,
when the type of the swap device is 1.
Use the whole swap entry as key,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list: 10.37,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_node_memcg: 9.78,
Use the swap offset as key,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list: 6.25,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_node_memcg: 5.94,
Link: http://lkml.kernel.org/r/1473270649-27229-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 03:00:21 +03:00
|
|
|
* use ->index whereas swapcache pages use swp_offset(->private)
|
2005-04-17 02:20:36 +04:00
|
|
|
*/
|
|
|
|
static inline pgoff_t page_index(struct page *page)
|
|
|
|
{
|
|
|
|
if (unlikely(PageSwapCache(page)))
|
mm, swap: use offset of swap entry as key of swap cache
This patch is to improve the performance of swap cache operations when
the type of the swap device is not 0. Originally, the whole swap entry
value is used as the key of the swap cache, even though there is one
radix tree for each swap device. If the type of the swap device is not
0, the height of the radix tree of the swap cache will be increased
unnecessary, especially on 64bit architecture. For example, for a 1GB
swap device on the x86_64 architecture, the height of the radix tree of
the swap cache is 11. But if the offset of the swap entry is used as
the key of the swap cache, the height of the radix tree of the swap
cache is 4. The increased height causes unnecessary radix tree
descending and increased cache footprint.
This patch reduces the height of the radix tree of the swap cache via
using the offset of the swap entry instead of the whole swap entry value
as the key of the swap cache. In 32 processes sequential swap out test
case on a Xeon E5 v3 system with RAM disk as swap, the lock contention
for the spinlock of the swap cache is reduced from 20.15% to 12.19%,
when the type of the swap device is 1.
Use the whole swap entry as key,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list: 10.37,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_node_memcg: 9.78,
Use the swap offset as key,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.__add_to_swap_cache.add_to_swap_cache.add_to_swap.shrink_page_list: 6.25,
perf-profile.calltrace.cycles-pp._raw_spin_lock_irqsave.__remove_mapping.shrink_page_list.shrink_inactive_list.shrink_node_memcg: 5.94,
Link: http://lkml.kernel.org/r/1473270649-27229-1-git-send-email-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 03:00:21 +03:00
|
|
|
return __page_file_index(page);
|
2005-04-17 02:20:36 +04:00
|
|
|
return page->index;
|
|
|
|
}
|
|
|
|
|
2016-05-20 03:12:00 +03:00
|
|
|
bool page_mapped(struct page *page);
|
mm: migrate: support non-lru movable page migration
We have allowed migration for only LRU pages until now and it was enough
to make high-order pages. But recently, embedded system(e.g., webOS,
android) uses lots of non-movable pages(e.g., zram, GPU memory) so we
have seen several reports about troubles of small high-order allocation.
For fixing the problem, there were several efforts (e,g,. enhance
compaction algorithm, SLUB fallback to 0-order page, reserved memory,
vmalloc and so on) but if there are lots of non-movable pages in system,
their solutions are void in the long run.
So, this patch is to support facility to change non-movable pages with
movable. For the feature, this patch introduces functions related to
migration to address_space_operations as well as some page flags.
If a driver want to make own pages movable, it should define three
functions which are function pointers of struct
address_space_operations.
1. bool (*isolate_page) (struct page *page, isolate_mode_t mode);
What VM expects on isolate_page function of driver is to return *true*
if driver isolates page successfully. On returing true, VM marks the
page as PG_isolated so concurrent isolation in several CPUs skip the
page for isolation. If a driver cannot isolate the page, it should
return *false*.
Once page is successfully isolated, VM uses page.lru fields so driver
shouldn't expect to preserve values in that fields.
2. int (*migratepage) (struct address_space *mapping,
struct page *newpage, struct page *oldpage, enum migrate_mode);
After isolation, VM calls migratepage of driver with isolated page. The
function of migratepage is to move content of the old page to new page
and set up fields of struct page newpage. Keep in mind that you should
indicate to the VM the oldpage is no longer movable via
__ClearPageMovable() under page_lock if you migrated the oldpage
successfully and returns 0. If driver cannot migrate the page at the
moment, driver can return -EAGAIN. On -EAGAIN, VM will retry page
migration in a short time because VM interprets -EAGAIN as "temporal
migration failure". On returning any error except -EAGAIN, VM will give
up the page migration without retrying in this time.
Driver shouldn't touch page.lru field VM using in the functions.
3. void (*putback_page)(struct page *);
If migration fails on isolated page, VM should return the isolated page
to the driver so VM calls driver's putback_page with migration failed
page. In this function, driver should put the isolated page back to the
own data structure.
4. non-lru movable page flags
There are two page flags for supporting non-lru movable page.
* PG_movable
Driver should use the below function to make page movable under
page_lock.
void __SetPageMovable(struct page *page, struct address_space *mapping)
It needs argument of address_space for registering migration family
functions which will be called by VM. Exactly speaking, PG_movable is
not a real flag of struct page. Rather than, VM reuses page->mapping's
lower bits to represent it.
#define PAGE_MAPPING_MOVABLE 0x2
page->mapping = page->mapping | PAGE_MAPPING_MOVABLE;
so driver shouldn't access page->mapping directly. Instead, driver
should use page_mapping which mask off the low two bits of page->mapping
so it can get right struct address_space.
For testing of non-lru movable page, VM supports __PageMovable function.
However, it doesn't guarantee to identify non-lru movable page because
page->mapping field is unified with other variables in struct page. As
well, if driver releases the page after isolation by VM, page->mapping
doesn't have stable value although it has PAGE_MAPPING_MOVABLE (Look at
__ClearPageMovable). But __PageMovable is cheap to catch whether page
is LRU or non-lru movable once the page has been isolated. Because LRU
pages never can have PAGE_MAPPING_MOVABLE in page->mapping. It is also
good for just peeking to test non-lru movable pages before more
expensive checking with lock_page in pfn scanning to select victim.
For guaranteeing non-lru movable page, VM provides PageMovable function.
Unlike __PageMovable, PageMovable functions validates page->mapping and
mapping->a_ops->isolate_page under lock_page. The lock_page prevents
sudden destroying of page->mapping.
Driver using __SetPageMovable should clear the flag via
__ClearMovablePage under page_lock before the releasing the page.
* PG_isolated
To prevent concurrent isolation among several CPUs, VM marks isolated
page as PG_isolated under lock_page. So if a CPU encounters PG_isolated
non-lru movable page, it can skip it. Driver doesn't need to manipulate
the flag because VM will set/clear it automatically. Keep in mind that
if driver sees PG_isolated page, it means the page have been isolated by
VM so it shouldn't touch page.lru field. PG_isolated is alias with
PG_reclaim flag so driver shouldn't use the flag for own purpose.
[opensource.ganesh@gmail.com: mm/compaction: remove local variable is_lru]
Link: http://lkml.kernel.org/r/20160618014841.GA7422@leo-test
Link: http://lkml.kernel.org/r/1464736881-24886-3-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Einar Reitan <john.reitan@foss.arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 01:23:05 +03:00
|
|
|
struct address_space *page_mapping(struct page *page);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2015-08-22 00:11:51 +03:00
|
|
|
/*
|
|
|
|
* Return true only if the page has been allocated with
|
|
|
|
* ALLOC_NO_WATERMARKS and the low watermark was not
|
|
|
|
* met implying that the system is under some pressure.
|
|
|
|
*/
|
|
|
|
static inline bool page_is_pfmemalloc(struct page *page)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* Page index cannot be this large so this must be
|
|
|
|
* a pfmemalloc page.
|
|
|
|
*/
|
|
|
|
return page->index == -1UL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Only to be called by the page allocator on a freshly allocated
|
|
|
|
* page.
|
|
|
|
*/
|
|
|
|
static inline void set_page_pfmemalloc(struct page *page)
|
|
|
|
{
|
|
|
|
page->index = -1UL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void clear_page_pfmemalloc(struct page *page)
|
|
|
|
{
|
|
|
|
page->index = 0;
|
|
|
|
}
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
* Different kinds of faults, as returned by handle_mm_fault().
|
|
|
|
* Used to decide whether a process gets delivered SIGBUS or
|
|
|
|
* just gets major/minor fault counters bumped up.
|
|
|
|
*/
|
2007-07-19 12:47:03 +04:00
|
|
|
|
2007-07-19 12:47:05 +04:00
|
|
|
#define VM_FAULT_OOM 0x0001
|
|
|
|
#define VM_FAULT_SIGBUS 0x0002
|
|
|
|
#define VM_FAULT_MAJOR 0x0004
|
|
|
|
#define VM_FAULT_WRITE 0x0008 /* Special case for get_user_pages */
|
2010-10-06 23:45:00 +04:00
|
|
|
#define VM_FAULT_HWPOISON 0x0010 /* Hit poisoned small page */
|
|
|
|
#define VM_FAULT_HWPOISON_LARGE 0x0020 /* Hit poisoned large page. Index encoded in upper bits */
|
vm: add VM_FAULT_SIGSEGV handling support
The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.
That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works. However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.
In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV. And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.
However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d4514 ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space. And user space really
expected SIGSEGV, not SIGBUS.
To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it. They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.
This is the mindless minimal patch to do this. A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.
Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.
Reported-and-tested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-29 21:51:32 +03:00
|
|
|
#define VM_FAULT_SIGSEGV 0x0040
|
[PATCH] fix get_user_pages bug
Checking pte_dirty instead of pte_write in __follow_page is problematic
for s390, and for copy_one_pte which leaves dirty when clearing write.
So revert __follow_page to check pte_write as before, and make
do_wp_page pass back a special extra VM_FAULT_WRITE bit to say it has
done its full job: once get_user_pages receives this value, it no longer
requires pte_write in __follow_page.
But most callers of handle_mm_fault, in the various architectures, have
switch statements which do not expect this new case. To avoid changing
them all in a hurry, make an inline wrapper function (using the old
name) that masks off the new bit, and use the extended interface with
double underscores.
Yes, we do have a call to do_wp_page from do_swap_page, but no need to
change that: in rare case it's needed, another do_wp_page will follow.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
[ Cleanups by Nick Piggin ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-03 14:24:01 +04:00
|
|
|
|
2007-07-19 12:47:05 +04:00
|
|
|
#define VM_FAULT_NOPAGE 0x0100 /* ->fault installed the pte, not return page */
|
|
|
|
#define VM_FAULT_LOCKED 0x0200 /* ->fault locked the returned page */
|
2010-10-27 01:21:57 +04:00
|
|
|
#define VM_FAULT_RETRY 0x0400 /* ->fault blocked, must retry */
|
2013-09-13 02:14:05 +04:00
|
|
|
#define VM_FAULT_FALLBACK 0x0800 /* huge page fault failed, fall back to small */
|
2016-12-15 02:07:24 +03:00
|
|
|
#define VM_FAULT_DONE_COW 0x1000 /* ->fault has fully handled COW */
|
2017-11-01 18:36:42 +03:00
|
|
|
#define VM_FAULT_NEEDDSYNC 0x2000 /* ->fault did not modify page tables
|
|
|
|
* and needs fsync() to complete (for
|
|
|
|
* synchronous page faults in DAX) */
|
2010-10-06 23:45:00 +04:00
|
|
|
|
vm: add VM_FAULT_SIGSEGV handling support
The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.
That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works. However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.
In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV. And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.
However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d4514 ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space. And user space really
expected SIGSEGV, not SIGBUS.
To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it. They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.
This is the mindless minimal patch to do this. A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.
Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.
Reported-and-tested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots"
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-29 21:51:32 +03:00
|
|
|
#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV | \
|
|
|
|
VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE | \
|
|
|
|
VM_FAULT_FALLBACK)
|
2010-10-06 23:45:00 +04:00
|
|
|
|
2017-02-23 02:39:50 +03:00
|
|
|
#define VM_FAULT_RESULT_TRACE \
|
|
|
|
{ VM_FAULT_OOM, "OOM" }, \
|
|
|
|
{ VM_FAULT_SIGBUS, "SIGBUS" }, \
|
|
|
|
{ VM_FAULT_MAJOR, "MAJOR" }, \
|
|
|
|
{ VM_FAULT_WRITE, "WRITE" }, \
|
|
|
|
{ VM_FAULT_HWPOISON, "HWPOISON" }, \
|
|
|
|
{ VM_FAULT_HWPOISON_LARGE, "HWPOISON_LARGE" }, \
|
|
|
|
{ VM_FAULT_SIGSEGV, "SIGSEGV" }, \
|
|
|
|
{ VM_FAULT_NOPAGE, "NOPAGE" }, \
|
|
|
|
{ VM_FAULT_LOCKED, "LOCKED" }, \
|
|
|
|
{ VM_FAULT_RETRY, "RETRY" }, \
|
|
|
|
{ VM_FAULT_FALLBACK, "FALLBACK" }, \
|
2017-11-01 18:36:42 +03:00
|
|
|
{ VM_FAULT_DONE_COW, "DONE_COW" }, \
|
|
|
|
{ VM_FAULT_NEEDDSYNC, "NEEDDSYNC" }
|
2017-02-23 02:39:50 +03:00
|
|
|
|
2010-10-06 23:45:00 +04:00
|
|
|
/* Encode hstate index for a hwpoisoned large page */
|
|
|
|
#define VM_FAULT_SET_HINDEX(x) ((x) << 12)
|
|
|
|
#define VM_FAULT_GET_HINDEX(x) (((x) >> 12) & 0xf)
|
2007-07-19 12:47:03 +04:00
|
|
|
|
2009-01-07 01:38:59 +03:00
|
|
|
/*
|
|
|
|
* Can be called by the pagefault handler when it gets a VM_FAULT_OOM.
|
|
|
|
*/
|
|
|
|
extern void pagefault_out_of_memory(void);
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
|
|
|
|
|
2011-03-23 02:30:46 +03:00
|
|
|
/*
|
2011-05-25 04:11:16 +04:00
|
|
|
* Flags passed to show_mem() and show_free_areas() to suppress output in
|
2011-03-23 02:30:46 +03:00
|
|
|
* various contexts.
|
|
|
|
*/
|
2013-04-30 02:06:11 +04:00
|
|
|
#define SHOW_MEM_FILTER_NODES (0x0001u) /* disallowed nodes */
|
2011-03-23 02:30:46 +03:00
|
|
|
|
2017-02-23 02:46:16 +03:00
|
|
|
extern void show_free_areas(unsigned int flags, nodemask_t *nodemask);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2016-01-16 03:57:22 +03:00
|
|
|
extern bool can_do_mlock(void);
|
2005-04-17 02:20:36 +04:00
|
|
|
extern int user_shm_lock(size_t, struct user_struct *);
|
|
|
|
extern void user_shm_unlock(size_t, struct user_struct *);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Parameter block passed down to zap_pte_range in exceptional cases.
|
|
|
|
*/
|
|
|
|
struct zap_details {
|
|
|
|
struct address_space *check_mapping; /* Check page->mapping if set */
|
|
|
|
pgoff_t first_index; /* Lowest page->index to unmap */
|
|
|
|
pgoff_t last_index; /* Highest page->index to unmap */
|
|
|
|
};
|
|
|
|
|
2017-09-09 02:12:24 +03:00
|
|
|
struct page *_vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
pte_t pte, bool with_public_device);
|
|
|
|
#define vm_normal_page(vma, addr, pte) _vm_normal_page(vma, addr, pte, false)
|
|
|
|
|
2016-04-29 02:18:35 +03:00
|
|
|
struct page *vm_normal_page_pmd(struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
pmd_t pmd);
|
mm: introduce pte_special pte bit
s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory
model (which is more dynamic than most). Instead, they had proposed to
implement it with an additional path through vm_normal_page(), using a bit in
the pte to determine whether or not the page should be refcounted:
vm_normal_page()
{
...
if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) {
if (vma->vm_flags & VM_MIXEDMAP) {
#ifdef s390
if (!mixedmap_refcount_pte(pte))
return NULL;
#else
if (!pfn_valid(pfn))
return NULL;
#endif
goto out;
}
...
}
This is fine, however if we are allowed to use a bit in the pte to determine
refcountedness, we can use that to _completely_ replace all the vma based
schemes. So instead of adding more cases to the already complex vma-based
scheme, we can have a clearly seperate and simple pte-based scheme (and get
slightly better code generation in the process):
vm_normal_page()
{
#ifdef s390
if (!mixedmap_refcount_pte(pte))
return NULL;
return pte_page(pte);
#else
...
#endif
}
And finally, we may rather make this concept usable by any architecture rather
than making it s390 only, so implement a new type of pte state for this.
Unfortunately the old vma based code must stay, because some architectures may
not be able to spare pte bits. This makes vm_normal_page a little bit more
ugly than we would like, but the 2 cases are clearly seperate.
So introduce a pte_special pte state, and use it in mm/memory.c. It is
currently a noop for all architectures, so this doesn't actually result in any
compiled code changes to mm/memory.o.
BTW:
I haven't put vm_normal_page() into arch code as-per an earlier suggestion.
The reason is that, regardless of where vm_normal_page is actually
implemented, the *abstraction* is still exactly the same. Also, while it
depends on whether the architecture has pte_special or not, that is the
only two possible cases, and it really isn't an arch specific function --
the role of the arch code should be to provide primitive functions and
accessors with which to build the core code; pte_special does that. We do
not want architectures to know or care about vm_normal_page itself, and
we definitely don't want them being able to invent something new there
out of sight of mm/ code. If we made vm_normal_page an arch function, then
we have to make vm_insert_mixed (next patch) an arch function too. So I
don't think moving it to arch code fundamentally improves any abstractions,
while it does practically make the code more difficult to follow, for both
mm and arch developers, and easier to misuse.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 13:13:00 +04:00
|
|
|
|
2008-07-30 09:33:53 +04:00
|
|
|
int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
|
|
|
|
unsigned long size);
|
2012-03-05 22:38:09 +04:00
|
|
|
void zap_page_range(struct vm_area_struct *vma, unsigned long address,
|
2017-02-23 02:46:37 +03:00
|
|
|
unsigned long size);
|
2012-05-07 00:54:06 +04:00
|
|
|
void unmap_vmas(struct mmu_gather *tlb, struct vm_area_struct *start_vma,
|
|
|
|
unsigned long start, unsigned long end);
|
2008-02-05 09:29:01 +03:00
|
|
|
|
|
|
|
/**
|
|
|
|
* mm_walk - callbacks for walk_page_range
|
2017-02-25 01:57:02 +03:00
|
|
|
* @pud_entry: if set, called for each non-empty PUD (2nd-level) entry
|
|
|
|
* this handler should only handle pud_trans_huge() puds.
|
|
|
|
* the pmd_entry or pte_entry callbacks will be used for
|
|
|
|
* regular PUDs.
|
2008-02-05 09:29:01 +03:00
|
|
|
* @pmd_entry: if set, called for each non-empty PMD (3rd-level) entry
|
2011-03-23 02:32:56 +03:00
|
|
|
* this handler is required to be able to handle
|
|
|
|
* pmd_trans_huge() pmds. They may simply choose to
|
|
|
|
* split_huge_page() instead of handling it explicitly.
|
2008-02-05 09:29:01 +03:00
|
|
|
* @pte_entry: if set, called for each non-empty PTE (4th-level) entry
|
|
|
|
* @pte_hole: if set, called for each hole at all levels
|
mm hugetlb: add hugepage support to pagemap
This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.
Details
-------
My test program (leak_pagemap) works as follows:
- creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
- read()/write() something on it,
- call page-types with option -p,
- munmap() and unlink() the file on hugetlbfs
Without my patches
------------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000086c 81 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 5 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 101 0
The output of page-types don't show any hugepage.
With my patches
---------------
$ ./leak_pagemap
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000000000000 1 0 __________________________________
0x0000000000030000 51100 199 ________________TG________________ compound_tail,huge
0x0000000000028018 100 0 ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804 1 0 __R________M______________________ referenced,mmap
0x000000000000080c 1 0 __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c 80 0 __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808 4 0 ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868 12 0 ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c 1 0 __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
total 51300 200
The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 05:00:01 +03:00
|
|
|
* @hugetlb_entry: if set, called for each hugetlb entry
|
2015-02-12 02:27:37 +03:00
|
|
|
* @test_walk: caller specific callback function to determine whether
|
2016-10-08 02:58:36 +03:00
|
|
|
* we walk over the current vma or not. Returning 0
|
2015-02-12 02:27:37 +03:00
|
|
|
* value means "do page table walk over the current vma,"
|
|
|
|
* and a negative one means "abort current page table walk
|
2016-10-08 02:58:36 +03:00
|
|
|
* right now." 1 means "skip the current vma."
|
2015-02-12 02:27:37 +03:00
|
|
|
* @mm: mm_struct representing the target process of page table walk
|
|
|
|
* @vma: vma currently walked (NULL if walking outside vmas)
|
|
|
|
* @private: private data for callbacks' usage
|
2008-02-05 09:29:01 +03:00
|
|
|
*
|
2015-02-12 02:27:37 +03:00
|
|
|
* (see the comment on walk_page_range() for more details)
|
2008-02-05 09:29:01 +03:00
|
|
|
*/
|
|
|
|
struct mm_walk {
|
2017-02-25 01:57:02 +03:00
|
|
|
int (*pud_entry)(pud_t *pud, unsigned long addr,
|
|
|
|
unsigned long next, struct mm_walk *walk);
|
2013-05-08 03:18:10 +04:00
|
|
|
int (*pmd_entry)(pmd_t *pmd, unsigned long addr,
|
|
|
|
unsigned long next, struct mm_walk *walk);
|
|
|
|
int (*pte_entry)(pte_t *pte, unsigned long addr,
|
|
|
|
unsigned long next, struct mm_walk *walk);
|
|
|
|
int (*pte_hole)(unsigned long addr, unsigned long next,
|
|
|
|
struct mm_walk *walk);
|
|
|
|
int (*hugetlb_entry)(pte_t *pte, unsigned long hmask,
|
|
|
|
unsigned long addr, unsigned long next,
|
|
|
|
struct mm_walk *walk);
|
2015-02-12 02:27:37 +03:00
|
|
|
int (*test_walk)(unsigned long addr, unsigned long next,
|
|
|
|
struct mm_walk *walk);
|
2008-06-13 02:21:47 +04:00
|
|
|
struct mm_struct *mm;
|
2015-02-12 02:27:37 +03:00
|
|
|
struct vm_area_struct *vma;
|
2008-06-13 02:21:47 +04:00
|
|
|
void *private;
|
2008-02-05 09:29:01 +03:00
|
|
|
};
|
|
|
|
|
2008-06-13 02:21:47 +04:00
|
|
|
int walk_page_range(unsigned long addr, unsigned long end,
|
|
|
|
struct mm_walk *walk);
|
2015-02-12 02:27:40 +03:00
|
|
|
int walk_page_vma(struct vm_area_struct *vma, struct mm_walk *walk);
|
2008-07-24 08:27:10 +04:00
|
|
|
void free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
|
2005-04-20 00:29:16 +04:00
|
|
|
unsigned long end, unsigned long floor, unsigned long ceiling);
|
2005-04-17 02:20:36 +04:00
|
|
|
int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
|
|
|
|
struct vm_area_struct *vma);
|
2017-01-11 03:57:21 +03:00
|
|
|
int follow_pte_pmd(struct mm_struct *mm, unsigned long address,
|
2017-09-01 00:17:26 +03:00
|
|
|
unsigned long *start, unsigned long *end,
|
2017-01-11 03:57:21 +03:00
|
|
|
pte_t **ptepp, pmd_t **pmdpp, spinlock_t **ptlp);
|
2009-06-17 02:32:35 +04:00
|
|
|
int follow_pfn(struct vm_area_struct *vma, unsigned long address,
|
|
|
|
unsigned long *pfn);
|
2008-12-20 00:47:27 +03:00
|
|
|
int follow_phys(struct vm_area_struct *vma, unsigned long address,
|
|
|
|
unsigned int flags, unsigned long *prot, resource_size_t *phys);
|
2008-07-24 08:27:05 +04:00
|
|
|
int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
void *buf, int len, int write);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2013-09-13 02:13:56 +04:00
|
|
|
extern void truncate_pagecache(struct inode *inode, loff_t new);
|
2010-06-04 13:30:04 +04:00
|
|
|
extern void truncate_setsize(struct inode *inode, loff_t newsize);
|
vfs: fix data corruption when blocksize < pagesize for mmaped data
->page_mkwrite() is used by filesystems to allocate blocks under a page
which is becoming writeably mmapped in some process' address space. This
allows a filesystem to return a page fault if there is not enough space
available, user exceeds quota or similar problem happens, rather than
silently discarding data later when writepage is called.
However VFS fails to call ->page_mkwrite() in all the cases where
filesystems need it when blocksize < pagesize. For example when
blocksize = 1024, pagesize = 4096 the following is problematic:
ftruncate(fd, 0);
pwrite(fd, buf, 1024, 0);
map = mmap(NULL, 1024, PROT_WRITE, MAP_SHARED, fd, 0);
map[0] = 'a'; ----> page_mkwrite() for index 0 is called
ftruncate(fd, 10000); /* or even pwrite(fd, buf, 1, 10000) */
mremap(map, 1024, 10000, 0);
map[4095] = 'a'; ----> no page_mkwrite() called
At the moment ->page_mkwrite() is called, filesystem can allocate only
one block for the page because i_size == 1024. Otherwise it would create
blocks beyond i_size which is generally undesirable. But later at
->writepage() time, we also need to store data at offset 4095 but we
don't have block allocated for it.
This patch introduces a helper function filesystems can use to have
->page_mkwrite() called at all the necessary moments.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-10-02 05:49:18 +04:00
|
|
|
void pagecache_isize_extended(struct inode *inode, loff_t from, loff_t to);
|
2012-03-29 01:42:40 +04:00
|
|
|
void truncate_pagecache_range(struct inode *inode, loff_t offset, loff_t end);
|
2009-09-16 13:50:12 +04:00
|
|
|
int truncate_inode_page(struct address_space *mapping, struct page *page);
|
2009-09-16 13:50:13 +04:00
|
|
|
int generic_error_remove_page(struct address_space *mapping, struct page *page);
|
2009-09-16 13:50:13 +04:00
|
|
|
int invalidate_inode_page(struct page *page);
|
|
|
|
|
2006-01-06 11:11:44 +03:00
|
|
|
#ifdef CONFIG_MMU
|
2016-07-27 01:25:18 +03:00
|
|
|
extern int handle_mm_fault(struct vm_area_struct *vma, unsigned long address,
|
|
|
|
unsigned int flags);
|
2011-07-27 14:17:11 +04:00
|
|
|
extern int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm,
|
2016-01-16 03:57:04 +03:00
|
|
|
unsigned long address, unsigned int fault_flags,
|
|
|
|
bool *unlocked);
|
2018-02-01 03:17:36 +03:00
|
|
|
void unmap_mapping_pages(struct address_space *mapping,
|
|
|
|
pgoff_t start, pgoff_t nr, bool even_cows);
|
|
|
|
void unmap_mapping_range(struct address_space *mapping,
|
|
|
|
loff_t const holebegin, loff_t const holelen, int even_cows);
|
2006-01-06 11:11:44 +03:00
|
|
|
#else
|
2016-07-27 01:25:18 +03:00
|
|
|
static inline int handle_mm_fault(struct vm_area_struct *vma,
|
|
|
|
unsigned long address, unsigned int flags)
|
2006-01-06 11:11:44 +03:00
|
|
|
{
|
|
|
|
/* should never happen if there's no MMU */
|
|
|
|
BUG();
|
|
|
|
return VM_FAULT_SIGBUS;
|
|
|
|
}
|
2011-07-27 14:17:11 +04:00
|
|
|
static inline int fixup_user_fault(struct task_struct *tsk,
|
|
|
|
struct mm_struct *mm, unsigned long address,
|
2016-01-16 03:57:04 +03:00
|
|
|
unsigned int fault_flags, bool *unlocked)
|
2011-07-27 14:17:11 +04:00
|
|
|
{
|
|
|
|
/* should never happen if there's no MMU */
|
|
|
|
BUG();
|
|
|
|
return -EFAULT;
|
|
|
|
}
|
2018-02-01 03:17:36 +03:00
|
|
|
static inline void unmap_mapping_pages(struct address_space *mapping,
|
|
|
|
pgoff_t start, pgoff_t nr, bool even_cows) { }
|
|
|
|
static inline void unmap_mapping_range(struct address_space *mapping,
|
|
|
|
loff_t const holebegin, loff_t const holelen, int even_cows) { }
|
2006-01-06 11:11:44 +03:00
|
|
|
#endif
|
[PATCH] fix get_user_pages bug
Checking pte_dirty instead of pte_write in __follow_page is problematic
for s390, and for copy_one_pte which leaves dirty when clearing write.
So revert __follow_page to check pte_write as before, and make
do_wp_page pass back a special extra VM_FAULT_WRITE bit to say it has
done its full job: once get_user_pages receives this value, it no longer
requires pte_write in __follow_page.
But most callers of handle_mm_fault, in the various architectures, have
switch statements which do not expect this new case. To avoid changing
them all in a hurry, make an inline wrapper function (using the old
name) that masks off the new bit, and use the extended interface with
double underscores.
Yes, we do have a call to do_wp_page from do_swap_page, but no need to
change that: in rare case it's needed, another do_wp_page will follow.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
[ Cleanups by Nick Piggin ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-03 14:24:01 +04:00
|
|
|
|
2018-02-01 03:17:36 +03:00
|
|
|
static inline void unmap_shared_mapping_range(struct address_space *mapping,
|
|
|
|
loff_t const holebegin, loff_t const holelen)
|
|
|
|
{
|
|
|
|
unmap_mapping_range(mapping, holebegin, holelen, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
extern int access_process_vm(struct task_struct *tsk, unsigned long addr,
|
|
|
|
void *buf, int len, unsigned int gup_flags);
|
2011-03-13 22:49:20 +03:00
|
|
|
extern int access_remote_vm(struct mm_struct *mm, unsigned long addr,
|
2016-10-13 03:20:19 +03:00
|
|
|
void *buf, int len, unsigned int gup_flags);
|
2016-11-22 21:06:50 +03:00
|
|
|
extern int __access_remote_vm(struct task_struct *tsk, struct mm_struct *mm,
|
|
|
|
unsigned long addr, void *buf, int len, unsigned int gup_flags);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2016-02-13 00:01:54 +03:00
|
|
|
long get_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm,
|
|
|
|
unsigned long start, unsigned long nr_pages,
|
2016-10-13 03:20:17 +03:00
|
|
|
unsigned int gup_flags, struct page **pages,
|
2016-12-15 02:06:52 +03:00
|
|
|
struct vm_area_struct **vmas, int *locked);
|
mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs
The pkeys changes brought about a truly hideous set of macros in:
cde70140fed8 ("mm/gup: Overload get_user_pages() functions")
... which macros are (ab-)using the fact that __VA_ARGS__ can be used
to shift parameter positions in macro arguments without breaking the
build and so can be used to call separate C functions depending on
the number of arguments of the macro.
This allowed easy migration of these 3 GUP APIs, as both these variants
worked at the C level:
old:
ret = get_user_pages(current, current->mm, address, 1, 1, 0, &page, NULL);
new:
ret = get_user_pages(address, 1, 1, 0, &page, NULL);
... while we also generated a (functionally harmless but noticeable) build
time warning if the old API was used. As there are over 300 uses of these
APIs, this trick eased the migration of the API and avoided excessive
migration pain in linux-next.
Now, with its work done, get rid of all of that complication and ugliness:
3 files changed, 16 insertions(+), 140 deletions(-)
... where the linecount of the migration hack was further inflated by the
fact that there are NOMMU variants of these GUP APIs as well.
Much of the conversion was done in linux-next over the past couple of months,
and Linus recently removed all remaining old API uses from the upstream tree
in the following upstrea commit:
cb107161df3c ("Convert straggling drivers to new six-argument get_user_pages()")
There was one more old-API usage in mm/gup.c, in the CONFIG_HAVE_GENERIC_RCU_GUP
code path that ARM, ARM64 and PowerPC uses.
After this commit any old API usage will break the build.
[ Also fixed a PowerPC/HAVE_GENERIC_RCU_GUP warning reported by Stephen Rothwell. ]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-04 11:24:58 +03:00
|
|
|
long get_user_pages(unsigned long start, unsigned long nr_pages,
|
2016-10-13 03:20:16 +03:00
|
|
|
unsigned int gup_flags, struct page **pages,
|
2016-02-13 00:01:55 +03:00
|
|
|
struct vm_area_struct **vmas);
|
mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs
The pkeys changes brought about a truly hideous set of macros in:
cde70140fed8 ("mm/gup: Overload get_user_pages() functions")
... which macros are (ab-)using the fact that __VA_ARGS__ can be used
to shift parameter positions in macro arguments without breaking the
build and so can be used to call separate C functions depending on
the number of arguments of the macro.
This allowed easy migration of these 3 GUP APIs, as both these variants
worked at the C level:
old:
ret = get_user_pages(current, current->mm, address, 1, 1, 0, &page, NULL);
new:
ret = get_user_pages(address, 1, 1, 0, &page, NULL);
... while we also generated a (functionally harmless but noticeable) build
time warning if the old API was used. As there are over 300 uses of these
APIs, this trick eased the migration of the API and avoided excessive
migration pain in linux-next.
Now, with its work done, get rid of all of that complication and ugliness:
3 files changed, 16 insertions(+), 140 deletions(-)
... where the linecount of the migration hack was further inflated by the
fact that there are NOMMU variants of these GUP APIs as well.
Much of the conversion was done in linux-next over the past couple of months,
and Linus recently removed all remaining old API uses from the upstream tree
in the following upstrea commit:
cb107161df3c ("Convert straggling drivers to new six-argument get_user_pages()")
There was one more old-API usage in mm/gup.c, in the CONFIG_HAVE_GENERIC_RCU_GUP
code path that ARM, ARM64 and PowerPC uses.
After this commit any old API usage will break the build.
[ Also fixed a PowerPC/HAVE_GENERIC_RCU_GUP warning reported by Stephen Rothwell. ]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-04 11:24:58 +03:00
|
|
|
long get_user_pages_locked(unsigned long start, unsigned long nr_pages,
|
2016-10-13 03:20:14 +03:00
|
|
|
unsigned int gup_flags, struct page **pages, int *locked);
|
mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs
The pkeys changes brought about a truly hideous set of macros in:
cde70140fed8 ("mm/gup: Overload get_user_pages() functions")
... which macros are (ab-)using the fact that __VA_ARGS__ can be used
to shift parameter positions in macro arguments without breaking the
build and so can be used to call separate C functions depending on
the number of arguments of the macro.
This allowed easy migration of these 3 GUP APIs, as both these variants
worked at the C level:
old:
ret = get_user_pages(current, current->mm, address, 1, 1, 0, &page, NULL);
new:
ret = get_user_pages(address, 1, 1, 0, &page, NULL);
... while we also generated a (functionally harmless but noticeable) build
time warning if the old API was used. As there are over 300 uses of these
APIs, this trick eased the migration of the API and avoided excessive
migration pain in linux-next.
Now, with its work done, get rid of all of that complication and ugliness:
3 files changed, 16 insertions(+), 140 deletions(-)
... where the linecount of the migration hack was further inflated by the
fact that there are NOMMU variants of these GUP APIs as well.
Much of the conversion was done in linux-next over the past couple of months,
and Linus recently removed all remaining old API uses from the upstream tree
in the following upstrea commit:
cb107161df3c ("Convert straggling drivers to new six-argument get_user_pages()")
There was one more old-API usage in mm/gup.c, in the CONFIG_HAVE_GENERIC_RCU_GUP
code path that ARM, ARM64 and PowerPC uses.
After this commit any old API usage will break the build.
[ Also fixed a PowerPC/HAVE_GENERIC_RCU_GUP warning reported by Stephen Rothwell. ]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-04 11:24:58 +03:00
|
|
|
long get_user_pages_unlocked(unsigned long start, unsigned long nr_pages,
|
2016-10-13 03:20:13 +03:00
|
|
|
struct page **pages, unsigned int gup_flags);
|
2017-11-30 03:10:35 +03:00
|
|
|
#ifdef CONFIG_FS_DAX
|
|
|
|
long get_user_pages_longterm(unsigned long start, unsigned long nr_pages,
|
|
|
|
unsigned int gup_flags, struct page **pages,
|
|
|
|
struct vm_area_struct **vmas);
|
|
|
|
#else
|
|
|
|
static inline long get_user_pages_longterm(unsigned long start,
|
|
|
|
unsigned long nr_pages, unsigned int gup_flags,
|
|
|
|
struct page **pages, struct vm_area_struct **vmas)
|
|
|
|
{
|
|
|
|
return get_user_pages(start, nr_pages, gup_flags, pages, vmas);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_FS_DAX */
|
|
|
|
|
2009-06-17 02:31:39 +04:00
|
|
|
int get_user_pages_fast(unsigned long start, int nr_pages, int write,
|
|
|
|
struct page **pages);
|
2015-07-13 17:55:44 +03:00
|
|
|
|
|
|
|
/* Container for pinned pfns / pages */
|
|
|
|
struct frame_vector {
|
|
|
|
unsigned int nr_allocated; /* Number of frames we have space for */
|
|
|
|
unsigned int nr_frames; /* Number of frames stored in ptrs array */
|
|
|
|
bool got_ref; /* Did we pin pages by getting page ref? */
|
|
|
|
bool is_pfns; /* Does array contain pages or pfns? */
|
|
|
|
void *ptrs[0]; /* Array of pinned pfns / pages. Use
|
|
|
|
* pfns_vector_pages() or pfns_vector_pfns()
|
|
|
|
* for access */
|
|
|
|
};
|
|
|
|
|
|
|
|
struct frame_vector *frame_vector_create(unsigned int nr_frames);
|
|
|
|
void frame_vector_destroy(struct frame_vector *vec);
|
|
|
|
int get_vaddr_frames(unsigned long start, unsigned int nr_pfns,
|
2016-10-13 03:20:15 +03:00
|
|
|
unsigned int gup_flags, struct frame_vector *vec);
|
2015-07-13 17:55:44 +03:00
|
|
|
void put_vaddr_frames(struct frame_vector *vec);
|
|
|
|
int frame_vector_to_pages(struct frame_vector *vec);
|
|
|
|
void frame_vector_to_pfns(struct frame_vector *vec);
|
|
|
|
|
|
|
|
static inline unsigned int frame_vector_count(struct frame_vector *vec)
|
|
|
|
{
|
|
|
|
return vec->nr_frames;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct page **frame_vector_pages(struct frame_vector *vec)
|
|
|
|
{
|
|
|
|
if (vec->is_pfns) {
|
|
|
|
int err = frame_vector_to_pages(vec);
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
return ERR_PTR(err);
|
|
|
|
}
|
|
|
|
return (struct page **)(vec->ptrs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned long *frame_vector_pfns(struct frame_vector *vec)
|
|
|
|
{
|
|
|
|
if (!vec->is_pfns)
|
|
|
|
frame_vector_to_pfns(vec);
|
|
|
|
return (unsigned long *)(vec->ptrs);
|
|
|
|
}
|
|
|
|
|
2012-08-01 03:44:51 +04:00
|
|
|
struct kvec;
|
|
|
|
int get_kernel_pages(const struct kvec *iov, int nr_pages, int write,
|
|
|
|
struct page **pages);
|
|
|
|
int get_kernel_page(unsigned long start, int write, struct page **pages);
|
2009-09-22 04:03:25 +04:00
|
|
|
struct page *get_dump_page(unsigned long addr);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2006-08-29 22:05:54 +04:00
|
|
|
extern int try_to_release_page(struct page * page, gfp_t gfp_mask);
|
2013-05-22 07:17:23 +04:00
|
|
|
extern void do_invalidatepage(struct page *page, unsigned int offset,
|
|
|
|
unsigned int length);
|
2006-08-29 22:05:54 +04:00
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
int __set_page_dirty_nobuffers(struct page *page);
|
2007-02-10 12:43:15 +03:00
|
|
|
int __set_page_dirty_no_writeback(struct page *page);
|
2005-04-17 02:20:36 +04:00
|
|
|
int redirty_page_for_writepage(struct writeback_control *wbc,
|
|
|
|
struct page *page);
|
2016-03-16 00:57:22 +03:00
|
|
|
void account_page_dirtied(struct page *page, struct address_space *mapping);
|
memcg: add per cgroup dirty page accounting
When modifying PG_Dirty on cached file pages, update the new
MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where
global NR_FILE_DIRTY is managed. The new memcg stat is visible in the
per memcg memory.stat cgroupfs file. The most recent past attempt at
this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632
The new accounting supports future efforts to add per cgroup dirty
page throttling and writeback. It also helps an administrator break
down a container's memory usage and provides evidence to understand
memcg oom kills (the new dirty count is included in memcg oom kill
messages).
The ability to move page accounting between memcg
(memory.move_charge_at_immigrate) makes this accounting more
complicated than the global counter. The existing
mem_cgroup_{begin,end}_page_stat() lock is used to serialize move
accounting with stat updates.
Typical update operation:
memcg = mem_cgroup_begin_page_stat(page)
if (TestSetPageDirty()) {
[...]
mem_cgroup_update_page_stat(memcg)
}
mem_cgroup_end_page_stat(memcg)
Summary of mem_cgroup_end_page_stat() overhead:
- Without CONFIG_MEMCG it's a no-op
- With CONFIG_MEMCG and no inter memcg task movement, it's just
rcu_read_lock()
- With CONFIG_MEMCG and inter memcg task movement, it's
rcu_read_lock() + spin_lock_irqsave()
A memcg parameter is added to several routines because their callers
now grab mem_cgroup_begin_page_stat() which returns the memcg later
needed by for mem_cgroup_update_page_stat().
Because mem_cgroup_begin_page_stat() may disable interrupts, some
adjustments are needed:
- move __mark_inode_dirty() from __set_page_dirty() to its caller.
__mark_inode_dirty() locking does not want interrupts disabled.
- use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in
__delete_from_page_cache(), replace_page_cache_page(),
invalidate_complete_page2(), and __remove_mapping().
text data bss dec hex filename
8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before
8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after
+192 text bytes
8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before
8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after
+773 text bytes
Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for
all metrics, they're all wall clock or cycle counts. The read and write
fault benchmarks just measure fault time, they do not include I/O time.
* CONFIG_MEMCG not set:
baseline patched
kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples)
dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03%
dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99%
dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77%
read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples)
write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples)
* CONFIG_MEMCG=y root_memcg:
baseline patched
kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples)
dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90%
dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33%
dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00%
read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples)
write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples)
* CONFIG_MEMCG=y non-root_memcg:
baseline patched
kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples)
dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82%
dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27%
dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52%
read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples)
write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples)
As expected anon page faults are not affected by this patch.
tj: Updated to apply on top of the recent cancel_dirty_page() changes.
Signed-off-by: Sha Zhengju <handai.szj@gmail.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 00:13:16 +03:00
|
|
|
void account_page_cleaned(struct page *page, struct address_space *mapping,
|
2016-03-16 00:57:22 +03:00
|
|
|
struct bdi_writeback *wb);
|
2008-02-14 02:03:15 +03:00
|
|
|
int set_page_dirty(struct page *page);
|
2005-04-17 02:20:36 +04:00
|
|
|
int set_page_dirty_lock(struct page *page);
|
2017-11-16 04:37:11 +03:00
|
|
|
void __cancel_dirty_page(struct page *page);
|
|
|
|
static inline void cancel_dirty_page(struct page *page)
|
|
|
|
{
|
|
|
|
/* Avoid atomic ops, locking, etc. when not actually needed. */
|
|
|
|
if (PageDirty(page))
|
|
|
|
__cancel_dirty_page(page);
|
|
|
|
}
|
2005-04-17 02:20:36 +04:00
|
|
|
int clear_page_dirty_for_io(struct page *page);
|
2015-04-15 01:45:27 +03:00
|
|
|
|
2014-02-11 22:11:59 +04:00
|
|
|
int get_cmdline(struct task_struct *task, char *buffer, int buflen);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2015-09-09 00:58:28 +03:00
|
|
|
static inline bool vma_is_anonymous(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
return !vma->vm_ops;
|
|
|
|
}
|
|
|
|
|
2017-02-23 02:43:28 +03:00
|
|
|
#ifdef CONFIG_SHMEM
|
|
|
|
/*
|
|
|
|
* The vma_is_shmem is not inline because it is used only by slow
|
|
|
|
* paths in userfault.
|
|
|
|
*/
|
|
|
|
bool vma_is_shmem(struct vm_area_struct *vma);
|
|
|
|
#else
|
|
|
|
static inline bool vma_is_shmem(struct vm_area_struct *vma) { return false; }
|
|
|
|
#endif
|
|
|
|
|
2016-09-30 20:58:58 +03:00
|
|
|
int vma_is_stack_for_current(struct vm_area_struct *vma);
|
procfs: mark thread stack correctly in proc/<pid>/maps
Stack for a new thread is mapped by userspace code and passed via
sys_clone. This memory is currently seen as anonymous in
/proc/<pid>/maps, which makes it difficult to ascertain which mappings
are being used for thread stacks. This patch uses the individual task
stack pointers to determine which vmas are actually thread stacks.
For a multithreaded program like the following:
#include <pthread.h>
void *thread_main(void *foo)
{
while(1);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thread_main, NULL);
pthread_join(t, NULL);
}
proc/PID/maps looks like the following:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Here, one could guess that 7f8a44492000-7f8a44c92000 is a stack since
the earlier vma that has no permissions (7f8a44e3d000-7f8a4503d000) but
that is not always a reliable way to find out which vma is a thread
stack. Also, /proc/PID/maps and /proc/PID/task/TID/maps has the same
content.
With this patch in place, /proc/PID/task/TID/maps are treated as 'maps
as the task would see it' and hence, only the vma that that task uses as
stack is marked as [stack]. All other 'stack' vmas are marked as
anonymous memory. /proc/PID/maps acts as a thread group level view,
where all thread stack vmas are marked as [stack:TID] where TID is the
process ID of the task that uses that vma as stack, while the process
stack is marked as [stack].
So /proc/PID/maps will look like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Thus marking all vmas that are used as stacks by the threads in the
thread group along with the process stack. The task level maps will
however like this:
00400000-00401000 r-xp 00000000 fd:0a 3671804 /home/siddhesh/a.out
00600000-00601000 rw-p 00000000 fd:0a 3671804 /home/siddhesh/a.out
019ef000-01a10000 rw-p 00000000 00:00 0 [heap]
7f8a44491000-7f8a44492000 ---p 00000000 00:00 0
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
7f8a44c92000-7f8a44e3d000 r-xp 00000000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a44e3d000-7f8a4503d000 ---p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a4503d000-7f8a45041000 r--p 001ab000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45041000-7f8a45043000 rw-p 001af000 fd:00 2097482 /lib64/libc-2.14.90.so
7f8a45043000-7f8a45048000 rw-p 00000000 00:00 0
7f8a45048000-7f8a4505f000 r-xp 00000000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4505f000-7f8a4525e000 ---p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525e000-7f8a4525f000 r--p 00016000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a4525f000-7f8a45260000 rw-p 00017000 fd:00 2099938 /lib64/libpthread-2.14.90.so
7f8a45260000-7f8a45264000 rw-p 00000000 00:00 0
7f8a45264000-7f8a45286000 r-xp 00000000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45457000-7f8a4545a000 rw-p 00000000 00:00 0
7f8a45484000-7f8a45485000 rw-p 00000000 00:00 0
7f8a45485000-7f8a45486000 r--p 00021000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45486000-7f8a45487000 rw-p 00022000 fd:00 2097348 /lib64/ld-2.14.90.so
7f8a45487000-7f8a45488000 rw-p 00000000 00:00 0
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0
7fff627ff000-7fff62800000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
where only the vma that is being used as a stack by *that* task is
marked as [stack].
Analogous changes have been made to /proc/PID/smaps,
/proc/PID/numa_maps, /proc/PID/task/TID/smaps and
/proc/PID/task/TID/numa_maps. Relevant snippets from smaps and
numa_maps:
[siddhesh@localhost ~ ]$ pgrep a.out
1441
[siddhesh@localhost ~ ]$ cat /proc/1441/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack:1442]
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/smaps | grep "\[stack"
7f8a44492000-7f8a44c92000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/smaps | grep "\[stack"
7fff6273b000-7fff6275c000 rw-p 00000000 00:00 0 [stack]
[siddhesh@localhost ~ ]$ cat /proc/1441/numa_maps | grep "stack"
7f8a44492000 default stack:1442 anon=2 dirty=2 N0=2
7fff6273a000 default stack anon=3 dirty=3 N0=3
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1442/numa_maps | grep "stack"
7f8a44492000 default stack anon=2 dirty=2 N0=2
[siddhesh@localhost ~ ]$ cat /proc/1441/task/1441/numa_maps | grep "stack"
7fff6273a000 default stack anon=3 dirty=3 N0=3
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 03:34:04 +04:00
|
|
|
|
2007-07-19 12:48:16 +04:00
|
|
|
extern unsigned long move_page_tables(struct vm_area_struct *vma,
|
|
|
|
unsigned long old_addr, struct vm_area_struct *new_vma,
|
2012-10-09 03:31:50 +04:00
|
|
|
unsigned long new_addr, unsigned long len,
|
|
|
|
bool need_rmap_locks);
|
2012-11-19 06:14:23 +04:00
|
|
|
extern unsigned long change_protection(struct vm_area_struct *vma, unsigned long start,
|
|
|
|
unsigned long end, pgprot_t newprot,
|
2012-10-25 16:16:32 +04:00
|
|
|
int dirty_accountable, int prot_numa);
|
2007-07-19 12:48:16 +04:00
|
|
|
extern int mprotect_fixup(struct vm_area_struct *vma,
|
|
|
|
struct vm_area_struct **pprev, unsigned long start,
|
|
|
|
unsigned long end, unsigned long newflags);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2009-06-15 14:31:37 +04:00
|
|
|
/*
|
|
|
|
* doesn't attempt to fault and will return short.
|
|
|
|
*/
|
|
|
|
int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
|
|
|
|
struct page **pages);
|
2010-03-06 00:41:39 +03:00
|
|
|
/*
|
|
|
|
* per-process(per-mm_struct) statistics.
|
|
|
|
*/
|
|
|
|
static inline unsigned long get_mm_counter(struct mm_struct *mm, int member)
|
|
|
|
{
|
2012-03-22 03:33:49 +04:00
|
|
|
long val = atomic_long_read(&mm->rss_stat.count[member]);
|
|
|
|
|
|
|
|
#ifdef SPLIT_RSS_COUNTING
|
|
|
|
/*
|
|
|
|
* counter is updated in asynchronous manner and may go to minus.
|
|
|
|
* But it's never be expected number for users.
|
|
|
|
*/
|
|
|
|
if (val < 0)
|
|
|
|
val = 0;
|
2011-05-25 04:12:36 +04:00
|
|
|
#endif
|
2012-03-22 03:33:49 +04:00
|
|
|
return (unsigned long)val;
|
|
|
|
}
|
2010-03-06 00:41:39 +03:00
|
|
|
|
|
|
|
static inline void add_mm_counter(struct mm_struct *mm, int member, long value)
|
|
|
|
{
|
2011-05-25 04:12:36 +04:00
|
|
|
atomic_long_add(value, &mm->rss_stat.count[member]);
|
2010-03-06 00:41:39 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void inc_mm_counter(struct mm_struct *mm, int member)
|
|
|
|
{
|
2011-05-25 04:12:36 +04:00
|
|
|
atomic_long_inc(&mm->rss_stat.count[member]);
|
2010-03-06 00:41:39 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void dec_mm_counter(struct mm_struct *mm, int member)
|
|
|
|
{
|
2011-05-25 04:12:36 +04:00
|
|
|
atomic_long_dec(&mm->rss_stat.count[member]);
|
2010-03-06 00:41:39 +03:00
|
|
|
}
|
|
|
|
|
2016-01-15 02:19:26 +03:00
|
|
|
/* Optimized variant when page is already known not to be PageAnon */
|
|
|
|
static inline int mm_counter_file(struct page *page)
|
|
|
|
{
|
|
|
|
if (PageSwapBacked(page))
|
|
|
|
return MM_SHMEMPAGES;
|
|
|
|
return MM_FILEPAGES;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int mm_counter(struct page *page)
|
|
|
|
{
|
|
|
|
if (PageAnon(page))
|
|
|
|
return MM_ANONPAGES;
|
|
|
|
return mm_counter_file(page);
|
|
|
|
}
|
|
|
|
|
2010-03-06 00:41:39 +03:00
|
|
|
static inline unsigned long get_mm_rss(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
return get_mm_counter(mm, MM_FILEPAGES) +
|
2016-01-15 02:19:26 +03:00
|
|
|
get_mm_counter(mm, MM_ANONPAGES) +
|
|
|
|
get_mm_counter(mm, MM_SHMEMPAGES);
|
2010-03-06 00:41:39 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned long get_mm_hiwater_rss(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
return max(mm->hiwater_rss, get_mm_rss(mm));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned long get_mm_hiwater_vm(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
return max(mm->hiwater_vm, mm->total_vm);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void update_hiwater_rss(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
unsigned long _rss = get_mm_rss(mm);
|
|
|
|
|
|
|
|
if ((mm)->hiwater_rss < _rss)
|
|
|
|
(mm)->hiwater_rss = _rss;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void update_hiwater_vm(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
if (mm->hiwater_vm < mm->total_vm)
|
|
|
|
mm->hiwater_vm = mm->total_vm;
|
|
|
|
}
|
|
|
|
|
2015-02-13 02:01:00 +03:00
|
|
|
static inline void reset_mm_hiwater_rss(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
mm->hiwater_rss = get_mm_rss(mm);
|
|
|
|
}
|
|
|
|
|
2010-03-06 00:41:39 +03:00
|
|
|
static inline void setmax_mm_hiwater_rss(unsigned long *maxrss,
|
|
|
|
struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
unsigned long hiwater_rss = get_mm_hiwater_rss(mm);
|
|
|
|
|
|
|
|
if (*maxrss < hiwater_rss)
|
|
|
|
*maxrss = hiwater_rss;
|
|
|
|
}
|
|
|
|
|
2010-03-11 02:20:38 +03:00
|
|
|
#if defined(SPLIT_RSS_COUNTING)
|
2012-03-22 03:34:13 +04:00
|
|
|
void sync_mm_rss(struct mm_struct *mm);
|
2010-03-11 02:20:38 +03:00
|
|
|
#else
|
2012-03-22 03:34:13 +04:00
|
|
|
static inline void sync_mm_rss(struct mm_struct *mm)
|
2010-03-11 02:20:38 +03:00
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif
|
2009-06-15 14:31:37 +04:00
|
|
|
|
2016-01-16 03:56:55 +03:00
|
|
|
#ifndef __HAVE_ARCH_PTE_DEVMAP
|
|
|
|
static inline int pte_devmap(pte_t pte)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2016-10-08 03:01:22 +03:00
|
|
|
int vma_wants_writenotify(struct vm_area_struct *vma, pgprot_t vm_page_prot);
|
2006-09-26 10:30:57 +04:00
|
|
|
|
2010-10-27 01:21:59 +04:00
|
|
|
extern pte_t *__get_locked_pte(struct mm_struct *mm, unsigned long addr,
|
|
|
|
spinlock_t **ptl);
|
|
|
|
static inline pte_t *get_locked_pte(struct mm_struct *mm, unsigned long addr,
|
|
|
|
spinlock_t **ptl)
|
|
|
|
{
|
|
|
|
pte_t *ptep;
|
|
|
|
__cond_lock(*ptl, ptep = __get_locked_pte(mm, addr, ptl));
|
|
|
|
return ptep;
|
|
|
|
}
|
2005-11-30 01:03:14 +03:00
|
|
|
|
2017-03-09 17:24:07 +03:00
|
|
|
#ifdef __PAGETABLE_P4D_FOLDED
|
|
|
|
static inline int __p4d_alloc(struct mm_struct *mm, pgd_t *pgd,
|
|
|
|
unsigned long address)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
int __p4d_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address);
|
|
|
|
#endif
|
|
|
|
|
2017-11-16 04:35:33 +03:00
|
|
|
#if defined(__PAGETABLE_PUD_FOLDED) || !defined(CONFIG_MMU)
|
2017-03-09 17:24:07 +03:00
|
|
|
static inline int __pud_alloc(struct mm_struct *mm, p4d_t *p4d,
|
2007-05-07 01:49:02 +04:00
|
|
|
unsigned long address)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
2017-11-16 04:35:33 +03:00
|
|
|
static inline void mm_inc_nr_puds(struct mm_struct *mm) {}
|
|
|
|
static inline void mm_dec_nr_puds(struct mm_struct *mm) {}
|
|
|
|
|
2007-05-07 01:49:02 +04:00
|
|
|
#else
|
2017-03-09 17:24:07 +03:00
|
|
|
int __pud_alloc(struct mm_struct *mm, p4d_t *p4d, unsigned long address);
|
2017-11-16 04:35:33 +03:00
|
|
|
|
|
|
|
static inline void mm_inc_nr_puds(struct mm_struct *mm)
|
|
|
|
{
|
2017-11-16 04:35:40 +03:00
|
|
|
atomic_long_add(PTRS_PER_PUD * sizeof(pud_t), &mm->pgtables_bytes);
|
2017-11-16 04:35:33 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mm_dec_nr_puds(struct mm_struct *mm)
|
|
|
|
{
|
2017-11-16 04:35:40 +03:00
|
|
|
atomic_long_sub(PTRS_PER_PUD * sizeof(pud_t), &mm->pgtables_bytes);
|
2017-11-16 04:35:33 +03:00
|
|
|
}
|
2007-05-07 01:49:02 +04:00
|
|
|
#endif
|
|
|
|
|
2015-02-13 01:59:59 +03:00
|
|
|
#if defined(__PAGETABLE_PMD_FOLDED) || !defined(CONFIG_MMU)
|
2007-05-07 01:49:02 +04:00
|
|
|
static inline int __pmd_alloc(struct mm_struct *mm, pud_t *pud,
|
|
|
|
unsigned long address)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 02:26:50 +03:00
|
|
|
|
|
|
|
static inline void mm_inc_nr_pmds(struct mm_struct *mm) {}
|
|
|
|
static inline void mm_dec_nr_pmds(struct mm_struct *mm) {}
|
|
|
|
|
2007-05-07 01:49:02 +04:00
|
|
|
#else
|
2005-10-30 04:16:22 +03:00
|
|
|
int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
|
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 02:26:50 +03:00
|
|
|
|
|
|
|
static inline void mm_inc_nr_pmds(struct mm_struct *mm)
|
|
|
|
{
|
2017-11-16 04:35:40 +03:00
|
|
|
atomic_long_add(PTRS_PER_PMD * sizeof(pmd_t), &mm->pgtables_bytes);
|
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 02:26:50 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mm_dec_nr_pmds(struct mm_struct *mm)
|
|
|
|
{
|
2017-11-16 04:35:40 +03:00
|
|
|
atomic_long_sub(PTRS_PER_PMD * sizeof(pmd_t), &mm->pgtables_bytes);
|
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 02:26:50 +03:00
|
|
|
}
|
2007-05-07 01:49:02 +04:00
|
|
|
#endif
|
|
|
|
|
2017-11-16 04:35:37 +03:00
|
|
|
#ifdef CONFIG_MMU
|
2017-11-16 04:35:40 +03:00
|
|
|
static inline void mm_pgtables_bytes_init(struct mm_struct *mm)
|
2017-11-16 04:35:37 +03:00
|
|
|
{
|
2017-11-16 04:35:40 +03:00
|
|
|
atomic_long_set(&mm->pgtables_bytes, 0);
|
2017-11-16 04:35:37 +03:00
|
|
|
}
|
|
|
|
|
2017-11-16 04:35:40 +03:00
|
|
|
static inline unsigned long mm_pgtables_bytes(const struct mm_struct *mm)
|
2017-11-16 04:35:37 +03:00
|
|
|
{
|
2017-11-16 04:35:40 +03:00
|
|
|
return atomic_long_read(&mm->pgtables_bytes);
|
2017-11-16 04:35:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mm_inc_nr_ptes(struct mm_struct *mm)
|
|
|
|
{
|
2017-11-16 04:35:40 +03:00
|
|
|
atomic_long_add(PTRS_PER_PTE * sizeof(pte_t), &mm->pgtables_bytes);
|
2017-11-16 04:35:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mm_dec_nr_ptes(struct mm_struct *mm)
|
|
|
|
{
|
2017-11-16 04:35:40 +03:00
|
|
|
atomic_long_sub(PTRS_PER_PTE * sizeof(pte_t), &mm->pgtables_bytes);
|
2017-11-16 04:35:37 +03:00
|
|
|
}
|
|
|
|
#else
|
|
|
|
|
2017-11-16 04:35:40 +03:00
|
|
|
static inline void mm_pgtables_bytes_init(struct mm_struct *mm) {}
|
|
|
|
static inline unsigned long mm_pgtables_bytes(const struct mm_struct *mm)
|
2017-11-16 04:35:37 +03:00
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mm_inc_nr_ptes(struct mm_struct *mm) {}
|
|
|
|
static inline void mm_dec_nr_ptes(struct mm_struct *mm) {}
|
|
|
|
#endif
|
|
|
|
|
2016-03-18 00:19:11 +03:00
|
|
|
int __pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address);
|
2005-10-30 04:16:22 +03:00
|
|
|
int __pte_alloc_kernel(pmd_t *pmd, unsigned long address);
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
* The following ifdef needed to get the 4level-fixup.h header to work.
|
|
|
|
* Remove it when 4level-fixup.h has been removed.
|
|
|
|
*/
|
2005-10-30 04:16:22 +03:00
|
|
|
#if defined(CONFIG_MMU) && !defined(__ARCH_HAS_4LEVEL_HACK)
|
2017-03-09 17:24:03 +03:00
|
|
|
|
|
|
|
#ifndef __ARCH_HAS_5LEVEL_HACK
|
2017-03-09 17:24:07 +03:00
|
|
|
static inline p4d_t *p4d_alloc(struct mm_struct *mm, pgd_t *pgd,
|
|
|
|
unsigned long address)
|
|
|
|
{
|
|
|
|
return (unlikely(pgd_none(*pgd)) && __p4d_alloc(mm, pgd, address)) ?
|
|
|
|
NULL : p4d_offset(pgd, address);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline pud_t *pud_alloc(struct mm_struct *mm, p4d_t *p4d,
|
|
|
|
unsigned long address)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
2017-03-09 17:24:07 +03:00
|
|
|
return (unlikely(p4d_none(*p4d)) && __pud_alloc(mm, p4d, address)) ?
|
|
|
|
NULL : pud_offset(p4d, address);
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
2017-03-09 17:24:03 +03:00
|
|
|
#endif /* !__ARCH_HAS_5LEVEL_HACK */
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
static inline pmd_t *pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
|
|
|
|
{
|
2005-10-30 04:16:22 +03:00
|
|
|
return (unlikely(pud_none(*pud)) && __pmd_alloc(mm, pud, address))?
|
|
|
|
NULL: pmd_offset(pud, address);
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
2005-10-30 04:16:22 +03:00
|
|
|
#endif /* CONFIG_MMU && !__ARCH_HAS_4LEVEL_HACK */
|
|
|
|
|
2013-11-15 02:30:45 +04:00
|
|
|
#if USE_SPLIT_PTE_PTLOCKS
|
2013-12-20 15:35:58 +04:00
|
|
|
#if ALLOC_SPLIT_PTLOCKS
|
2014-01-22 03:49:07 +04:00
|
|
|
void __init ptlock_cache_init(void);
|
2013-11-15 02:31:52 +04:00
|
|
|
extern bool ptlock_alloc(struct page *page);
|
|
|
|
extern void ptlock_free(struct page *page);
|
|
|
|
|
|
|
|
static inline spinlock_t *ptlock_ptr(struct page *page)
|
|
|
|
{
|
|
|
|
return page->ptl;
|
|
|
|
}
|
2013-12-20 15:35:58 +04:00
|
|
|
#else /* ALLOC_SPLIT_PTLOCKS */
|
2014-01-22 03:49:07 +04:00
|
|
|
static inline void ptlock_cache_init(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2013-11-15 02:31:51 +04:00
|
|
|
static inline bool ptlock_alloc(struct page *page)
|
|
|
|
{
|
|
|
|
return true;
|
|
|
|
}
|
2013-11-15 02:31:52 +04:00
|
|
|
|
2013-11-15 02:31:51 +04:00
|
|
|
static inline void ptlock_free(struct page *page)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline spinlock_t *ptlock_ptr(struct page *page)
|
|
|
|
{
|
2013-11-15 02:31:52 +04:00
|
|
|
return &page->ptl;
|
2013-11-15 02:31:51 +04:00
|
|
|
}
|
2013-12-20 15:35:58 +04:00
|
|
|
#endif /* ALLOC_SPLIT_PTLOCKS */
|
2013-11-15 02:31:51 +04:00
|
|
|
|
|
|
|
static inline spinlock_t *pte_lockptr(struct mm_struct *mm, pmd_t *pmd)
|
|
|
|
{
|
|
|
|
return ptlock_ptr(pmd_page(*pmd));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool ptlock_init(struct page *page)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* prep_new_page() initialize page->private (and therefore page->ptl)
|
|
|
|
* with 0. Make sure nobody took it in use in between.
|
|
|
|
*
|
|
|
|
* It can happen if arch try to use slab for page table allocation:
|
2015-11-07 03:29:54 +03:00
|
|
|
* slab code uses page->slab_cache, which share storage with page->ptl.
|
2013-11-15 02:31:51 +04:00
|
|
|
*/
|
2014-01-24 03:52:54 +04:00
|
|
|
VM_BUG_ON_PAGE(*(unsigned long *)&page->ptl, page);
|
2013-11-15 02:31:51 +04:00
|
|
|
if (!ptlock_alloc(page))
|
|
|
|
return false;
|
|
|
|
spin_lock_init(ptlock_ptr(page));
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset page->mapping so free_pages_check won't complain. */
|
|
|
|
static inline void pte_lock_deinit(struct page *page)
|
|
|
|
{
|
|
|
|
page->mapping = NULL;
|
|
|
|
ptlock_free(page);
|
|
|
|
}
|
|
|
|
|
2013-11-15 02:30:45 +04:00
|
|
|
#else /* !USE_SPLIT_PTE_PTLOCKS */
|
[PATCH] mm: split page table lock
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with
a many-threaded application which concurrently initializes different parts of
a large anonymous area.
This patch corrects that, by using a separate spinlock per page table page, to
guard the page table entries in that page, instead of using the mm's single
page_table_lock. (But even then, page_table_lock is still used to guard page
table allocation, and anon_vma allocation.)
In this implementation, the spinlock is tucked inside the struct page of the
page table page: with a BUILD_BUG_ON in case it overflows - which it would in
the case of 32-bit PA-RISC with spinlock debugging enabled.
Splitting the lock is not quite for free: another cacheline access. Ideally,
I suppose we would use split ptlock only for multi-threaded processes on
multi-cpu machines; but deciding that dynamically would have its own costs.
So for now enable it by config, at some number of cpus - since the Kconfig
language doesn't support inequalities, let preprocessor compare that with
NR_CPUS. But I don't think it's worth being user-configurable: for good
testing of both split and unsplit configs, split now at 4 cpus, and perhaps
change that to 8 later.
There is a benefit even for singly threaded processes: kswapd can be attacking
one part of the mm while another part is busy faulting.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
|
|
|
/*
|
|
|
|
* We use mm->page_table_lock to guard all pagetable pages of the mm.
|
|
|
|
*/
|
2013-11-15 02:31:51 +04:00
|
|
|
static inline spinlock_t *pte_lockptr(struct mm_struct *mm, pmd_t *pmd)
|
|
|
|
{
|
|
|
|
return &mm->page_table_lock;
|
|
|
|
}
|
2014-01-22 03:49:07 +04:00
|
|
|
static inline void ptlock_cache_init(void) {}
|
2013-11-15 02:31:51 +04:00
|
|
|
static inline bool ptlock_init(struct page *page) { return true; }
|
|
|
|
static inline void pte_lock_deinit(struct page *page) {}
|
2013-11-15 02:30:45 +04:00
|
|
|
#endif /* USE_SPLIT_PTE_PTLOCKS */
|
[PATCH] mm: split page table lock
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with
a many-threaded application which concurrently initializes different parts of
a large anonymous area.
This patch corrects that, by using a separate spinlock per page table page, to
guard the page table entries in that page, instead of using the mm's single
page_table_lock. (But even then, page_table_lock is still used to guard page
table allocation, and anon_vma allocation.)
In this implementation, the spinlock is tucked inside the struct page of the
page table page: with a BUILD_BUG_ON in case it overflows - which it would in
the case of 32-bit PA-RISC with spinlock debugging enabled.
Splitting the lock is not quite for free: another cacheline access. Ideally,
I suppose we would use split ptlock only for multi-threaded processes on
multi-cpu machines; but deciding that dynamically would have its own costs.
So for now enable it by config, at some number of cpus - since the Kconfig
language doesn't support inequalities, let preprocessor compare that with
NR_CPUS. But I don't think it's worth being user-configurable: for good
testing of both split and unsplit configs, split now at 4 cpus, and perhaps
change that to 8 later.
There is a benefit even for singly threaded processes: kswapd can be attacking
one part of the mm while another part is busy faulting.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
|
|
|
|
2014-01-22 03:49:07 +04:00
|
|
|
static inline void pgtable_init(void)
|
|
|
|
{
|
|
|
|
ptlock_cache_init();
|
|
|
|
pgtable_cache_init();
|
|
|
|
}
|
|
|
|
|
2013-11-15 02:31:20 +04:00
|
|
|
static inline bool pgtable_page_ctor(struct page *page)
|
2008-02-08 15:22:04 +03:00
|
|
|
{
|
2015-11-06 05:49:27 +03:00
|
|
|
if (!ptlock_init(page))
|
|
|
|
return false;
|
2008-02-08 15:22:04 +03:00
|
|
|
inc_zone_page_state(page, NR_PAGETABLE);
|
2015-11-06 05:49:27 +03:00
|
|
|
return true;
|
2008-02-08 15:22:04 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pgtable_page_dtor(struct page *page)
|
|
|
|
{
|
|
|
|
pte_lock_deinit(page);
|
|
|
|
dec_zone_page_state(page, NR_PAGETABLE);
|
|
|
|
}
|
|
|
|
|
2005-10-30 04:16:23 +03:00
|
|
|
#define pte_offset_map_lock(mm, pmd, address, ptlp) \
|
|
|
|
({ \
|
[PATCH] mm: split page table lock
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with
a many-threaded application which concurrently initializes different parts of
a large anonymous area.
This patch corrects that, by using a separate spinlock per page table page, to
guard the page table entries in that page, instead of using the mm's single
page_table_lock. (But even then, page_table_lock is still used to guard page
table allocation, and anon_vma allocation.)
In this implementation, the spinlock is tucked inside the struct page of the
page table page: with a BUILD_BUG_ON in case it overflows - which it would in
the case of 32-bit PA-RISC with spinlock debugging enabled.
Splitting the lock is not quite for free: another cacheline access. Ideally,
I suppose we would use split ptlock only for multi-threaded processes on
multi-cpu machines; but deciding that dynamically would have its own costs.
So for now enable it by config, at some number of cpus - since the Kconfig
language doesn't support inequalities, let preprocessor compare that with
NR_CPUS. But I don't think it's worth being user-configurable: for good
testing of both split and unsplit configs, split now at 4 cpus, and perhaps
change that to 8 later.
There is a benefit even for singly threaded processes: kswapd can be attacking
one part of the mm while another part is busy faulting.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 04:16:40 +03:00
|
|
|
spinlock_t *__ptl = pte_lockptr(mm, pmd); \
|
2005-10-30 04:16:23 +03:00
|
|
|
pte_t *__pte = pte_offset_map(pmd, address); \
|
|
|
|
*(ptlp) = __ptl; \
|
|
|
|
spin_lock(__ptl); \
|
|
|
|
__pte; \
|
|
|
|
})
|
|
|
|
|
|
|
|
#define pte_unmap_unlock(pte, ptl) do { \
|
|
|
|
spin_unlock(ptl); \
|
|
|
|
pte_unmap(pte); \
|
|
|
|
} while (0)
|
|
|
|
|
2016-03-18 00:19:11 +03:00
|
|
|
#define pte_alloc(mm, pmd, address) \
|
|
|
|
(unlikely(pmd_none(*(pmd))) && __pte_alloc(mm, pmd, address))
|
|
|
|
|
|
|
|
#define pte_alloc_map(mm, pmd, address) \
|
|
|
|
(pte_alloc(mm, pmd, address) ? NULL : pte_offset_map(pmd, address))
|
2005-10-30 04:16:22 +03:00
|
|
|
|
2005-10-30 04:16:23 +03:00
|
|
|
#define pte_alloc_map_lock(mm, pmd, address, ptlp) \
|
2016-03-18 00:19:11 +03:00
|
|
|
(pte_alloc(mm, pmd, address) ? \
|
|
|
|
NULL : pte_offset_map_lock(mm, pmd, address, ptlp))
|
2005-10-30 04:16:23 +03:00
|
|
|
|
2005-10-30 04:16:22 +03:00
|
|
|
#define pte_alloc_kernel(pmd, address) \
|
2011-01-14 02:46:43 +03:00
|
|
|
((unlikely(pmd_none(*(pmd))) && __pte_alloc_kernel(pmd, address))? \
|
2005-10-30 04:16:22 +03:00
|
|
|
NULL: pte_offset_kernel(pmd, address))
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2013-11-15 02:31:07 +04:00
|
|
|
#if USE_SPLIT_PMD_PTLOCKS
|
|
|
|
|
2014-02-13 16:53:33 +04:00
|
|
|
static struct page *pmd_to_page(pmd_t *pmd)
|
|
|
|
{
|
|
|
|
unsigned long mask = ~(PTRS_PER_PMD * sizeof(pmd_t) - 1);
|
|
|
|
return virt_to_page((void *)((unsigned long) pmd & mask));
|
|
|
|
}
|
|
|
|
|
2013-11-15 02:31:07 +04:00
|
|
|
static inline spinlock_t *pmd_lockptr(struct mm_struct *mm, pmd_t *pmd)
|
|
|
|
{
|
2014-02-13 16:53:33 +04:00
|
|
|
return ptlock_ptr(pmd_to_page(pmd));
|
2013-11-15 02:31:07 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline bool pgtable_pmd_page_ctor(struct page *page)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
|
|
|
page->pmd_huge_pte = NULL;
|
|
|
|
#endif
|
2013-11-15 02:31:51 +04:00
|
|
|
return ptlock_init(page);
|
2013-11-15 02:31:07 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pgtable_pmd_page_dtor(struct page *page)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
2014-01-24 03:52:54 +04:00
|
|
|
VM_BUG_ON_PAGE(page->pmd_huge_pte, page);
|
2013-11-15 02:31:07 +04:00
|
|
|
#endif
|
2013-11-15 02:31:51 +04:00
|
|
|
ptlock_free(page);
|
2013-11-15 02:31:07 +04:00
|
|
|
}
|
|
|
|
|
2014-02-13 16:53:33 +04:00
|
|
|
#define pmd_huge_pte(mm, pmd) (pmd_to_page(pmd)->pmd_huge_pte)
|
2013-11-15 02:31:07 +04:00
|
|
|
|
|
|
|
#else
|
|
|
|
|
2013-11-15 02:30:51 +04:00
|
|
|
static inline spinlock_t *pmd_lockptr(struct mm_struct *mm, pmd_t *pmd)
|
|
|
|
{
|
|
|
|
return &mm->page_table_lock;
|
|
|
|
}
|
|
|
|
|
2013-11-15 02:31:07 +04:00
|
|
|
static inline bool pgtable_pmd_page_ctor(struct page *page) { return true; }
|
|
|
|
static inline void pgtable_pmd_page_dtor(struct page *page) {}
|
|
|
|
|
2013-11-15 02:30:59 +04:00
|
|
|
#define pmd_huge_pte(mm, pmd) ((mm)->pmd_huge_pte)
|
2013-11-15 02:30:51 +04:00
|
|
|
|
2013-11-15 02:31:07 +04:00
|
|
|
#endif
|
|
|
|
|
2013-11-15 02:30:51 +04:00
|
|
|
static inline spinlock_t *pmd_lock(struct mm_struct *mm, pmd_t *pmd)
|
|
|
|
{
|
|
|
|
spinlock_t *ptl = pmd_lockptr(mm, pmd);
|
|
|
|
spin_lock(ptl);
|
|
|
|
return ptl;
|
|
|
|
}
|
|
|
|
|
2017-02-25 01:57:02 +03:00
|
|
|
/*
|
|
|
|
* No scalability reason to split PUD locks yet, but follow the same pattern
|
|
|
|
* as the PMD locks to make it easier if we decide to. The VM should not be
|
|
|
|
* considered ready to switch to split PUD locks yet; there may be places
|
|
|
|
* which need to be converted from page_table_lock.
|
|
|
|
*/
|
|
|
|
static inline spinlock_t *pud_lockptr(struct mm_struct *mm, pud_t *pud)
|
|
|
|
{
|
|
|
|
return &mm->page_table_lock;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline spinlock_t *pud_lock(struct mm_struct *mm, pud_t *pud)
|
|
|
|
{
|
|
|
|
spinlock_t *ptl = pud_lockptr(mm, pud);
|
|
|
|
|
|
|
|
spin_lock(ptl);
|
|
|
|
return ptl;
|
|
|
|
}
|
2016-12-25 06:00:30 +03:00
|
|
|
|
2017-02-25 01:57:02 +03:00
|
|
|
extern void __init pagecache_init(void);
|
2005-04-17 02:20:36 +04:00
|
|
|
extern void free_area_init(unsigned long * zones_size);
|
2008-07-24 08:27:20 +04:00
|
|
|
extern void free_area_init_node(int nid, unsigned long * zones_size,
|
|
|
|
unsigned long zone_start_pfn, unsigned long *zholes_size);
|
2012-03-28 21:30:03 +04:00
|
|
|
extern void free_initmem(void);
|
|
|
|
|
2013-04-30 02:06:21 +04:00
|
|
|
/*
|
|
|
|
* Free reserved pages within range [PAGE_ALIGN(start), end & PAGE_MASK)
|
|
|
|
* into the buddy system. The freed pages will be poisoned with pattern
|
2013-07-04 02:02:51 +04:00
|
|
|
* "poison" if it's within range [0, UCHAR_MAX].
|
2013-04-30 02:06:21 +04:00
|
|
|
* Return pages freed into the buddy system.
|
|
|
|
*/
|
mm: change signature of free_reserved_area() to fix building warnings
Change signature of free_reserved_area() according to Russell King's
suggestion to fix following build warnings:
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default]
free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL);
^
In file included from include/linux/mman.h:4:0,
from arch/arm/mm/init.c:15:
include/linux/mm.h:1301:22: note: expected 'long unsigned int' but argument is of type 'void *'
extern unsigned long free_reserved_area(unsigned long start, unsigned long end,
mm/page_alloc.c: In function 'free_reserved_area':
>> mm/page_alloc.c:5134:3: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default]
In file included from arch/mips/include/asm/page.h:49:0,
from include/linux/mmzone.h:20,
from include/linux/gfp.h:4,
from include/linux/mm.h:8,
from mm/page_alloc.c:18:
arch/mips/include/asm/io.h:119:29: note: expected 'const volatile void *' but argument is of type 'long unsigned int'
mm/page_alloc.c: In function 'free_area_init_nodes':
mm/page_alloc.c:5030:34: warning: array subscript is below array bounds [-Warray-bounds]
Also address some minor code review comments.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 02:02:48 +04:00
|
|
|
extern unsigned long free_reserved_area(void *start, void *end,
|
2013-04-30 02:06:21 +04:00
|
|
|
int poison, char *s);
|
2013-07-04 02:03:14 +04:00
|
|
|
|
2013-04-30 02:07:00 +04:00
|
|
|
#ifdef CONFIG_HIGHMEM
|
|
|
|
/*
|
|
|
|
* Free a highmem page into the buddy system, adjusting totalhigh_pages
|
|
|
|
* and totalram_pages.
|
|
|
|
*/
|
|
|
|
extern void free_highmem_page(struct page *page);
|
|
|
|
#endif
|
2013-04-30 02:06:21 +04:00
|
|
|
|
2013-07-04 02:03:14 +04:00
|
|
|
extern void adjust_managed_page_count(struct page *page, long count);
|
2013-07-04 02:03:41 +04:00
|
|
|
extern void mem_init_print_info(const char *str);
|
2013-04-30 02:06:21 +04:00
|
|
|
|
2016-05-21 02:58:38 +03:00
|
|
|
extern void reserve_bootmem_region(phys_addr_t start, phys_addr_t end);
|
2015-07-01 00:56:48 +03:00
|
|
|
|
2013-04-30 02:06:21 +04:00
|
|
|
/* Free the reserved page into the buddy system, so it gets managed. */
|
|
|
|
static inline void __free_reserved_page(struct page *page)
|
|
|
|
{
|
|
|
|
ClearPageReserved(page);
|
|
|
|
init_page_count(page);
|
|
|
|
__free_page(page);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void free_reserved_page(struct page *page)
|
|
|
|
{
|
|
|
|
__free_reserved_page(page);
|
|
|
|
adjust_managed_page_count(page, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mark_page_reserved(struct page *page)
|
|
|
|
{
|
|
|
|
SetPageReserved(page);
|
|
|
|
adjust_managed_page_count(page, -1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Default method to free all the __init memory into the buddy system.
|
2013-07-04 02:02:51 +04:00
|
|
|
* The freed pages will be poisoned with pattern "poison" if it's within
|
|
|
|
* range [0, UCHAR_MAX].
|
|
|
|
* Return pages freed into the buddy system.
|
2013-04-30 02:06:21 +04:00
|
|
|
*/
|
|
|
|
static inline unsigned long free_initmem_default(int poison)
|
|
|
|
{
|
|
|
|
extern char __init_begin[], __init_end[];
|
|
|
|
|
mm: change signature of free_reserved_area() to fix building warnings
Change signature of free_reserved_area() according to Russell King's
suggestion to fix following build warnings:
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default]
free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL);
^
In file included from include/linux/mman.h:4:0,
from arch/arm/mm/init.c:15:
include/linux/mm.h:1301:22: note: expected 'long unsigned int' but argument is of type 'void *'
extern unsigned long free_reserved_area(unsigned long start, unsigned long end,
mm/page_alloc.c: In function 'free_reserved_area':
>> mm/page_alloc.c:5134:3: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default]
In file included from arch/mips/include/asm/page.h:49:0,
from include/linux/mmzone.h:20,
from include/linux/gfp.h:4,
from include/linux/mm.h:8,
from mm/page_alloc.c:18:
arch/mips/include/asm/io.h:119:29: note: expected 'const volatile void *' but argument is of type 'long unsigned int'
mm/page_alloc.c: In function 'free_area_init_nodes':
mm/page_alloc.c:5030:34: warning: array subscript is below array bounds [-Warray-bounds]
Also address some minor code review comments.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 02:02:48 +04:00
|
|
|
return free_reserved_area(&__init_begin, &__init_end,
|
2013-04-30 02:06:21 +04:00
|
|
|
poison, "unused kernel");
|
|
|
|
}
|
|
|
|
|
2013-07-04 02:03:41 +04:00
|
|
|
static inline unsigned long get_num_physpages(void)
|
|
|
|
{
|
|
|
|
int nid;
|
|
|
|
unsigned long phys_pages = 0;
|
|
|
|
|
|
|
|
for_each_online_node(nid)
|
|
|
|
phys_pages += node_present_pages(nid);
|
|
|
|
|
|
|
|
return phys_pages;
|
|
|
|
}
|
|
|
|
|
2011-12-08 22:22:09 +04:00
|
|
|
#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
|
[PATCH] Introduce mechanism for registering active regions of memory
At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate zone
sizes and holes in each architecture is very similar. Some of this zone and
hole sizing code is difficult to read for no good reason. This set of patches
eliminates the similar-looking architecture-specific code.
The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones. The zone sizes and holes are then calculated in an architecture
independent manner.
Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
It adjusts the watermarks slightly
Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on
IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.
There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.
The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.
Additional credit;
Dave Hansen for the initial suggestion and comments on early patches
Andy Whitcroft for reviewing early versions and catching numerous
errors
Tony Luck for testing and debugging on IA64
Bob Picco for fixing bugs related to pfn registration, reviewing a
number of patch revisions, providing a number of suggestions
on future direction and testing heavily
Jack Steiner and Robin Holt for testing on IA64 and clarifying
issues related to memory holes
Yasunori for testing on IA64
Andi Kleen for reviewing and feeding back about x86_64
Christian Kujau for providing valuable information related to ACPI
problems on x86_64 and testing potential fixes
This patch:
Define the structure to represent an active range of page frames within a node
in an architecture independent manner. Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 12:49:43 +04:00
|
|
|
/*
|
2011-12-08 22:22:09 +04:00
|
|
|
* With CONFIG_HAVE_MEMBLOCK_NODE_MAP set, an architecture may initialise its
|
[PATCH] Introduce mechanism for registering active regions of memory
At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate zone
sizes and holes in each architecture is very similar. Some of this zone and
hole sizing code is difficult to read for no good reason. This set of patches
eliminates the similar-looking architecture-specific code.
The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones. The zone sizes and holes are then calculated in an architecture
independent manner.
Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
It adjusts the watermarks slightly
Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on
IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.
There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.
The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.
Additional credit;
Dave Hansen for the initial suggestion and comments on early patches
Andy Whitcroft for reviewing early versions and catching numerous
errors
Tony Luck for testing and debugging on IA64
Bob Picco for fixing bugs related to pfn registration, reviewing a
number of patch revisions, providing a number of suggestions
on future direction and testing heavily
Jack Steiner and Robin Holt for testing on IA64 and clarifying
issues related to memory holes
Yasunori for testing on IA64
Andi Kleen for reviewing and feeding back about x86_64
Christian Kujau for providing valuable information related to ACPI
problems on x86_64 and testing potential fixes
This patch:
Define the structure to represent an active range of page frames within a node
in an architecture independent manner. Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 12:49:43 +04:00
|
|
|
* zones, allocate the backing mem_map and account for memory holes in a more
|
|
|
|
* architecture independent manner. This is a substitute for creating the
|
|
|
|
* zone_sizes[] and zholes_size[] arrays and passing them to
|
|
|
|
* free_area_init_node()
|
|
|
|
*
|
|
|
|
* An architecture is expected to register range of page frames backed by
|
2011-12-08 22:22:09 +04:00
|
|
|
* physical memory with memblock_add[_node]() before calling
|
[PATCH] Introduce mechanism for registering active regions of memory
At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate zone
sizes and holes in each architecture is very similar. Some of this zone and
hole sizing code is difficult to read for no good reason. This set of patches
eliminates the similar-looking architecture-specific code.
The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones. The zone sizes and holes are then calculated in an architecture
independent manner.
Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
It adjusts the watermarks slightly
Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on
IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.
There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.
The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.
Additional credit;
Dave Hansen for the initial suggestion and comments on early patches
Andy Whitcroft for reviewing early versions and catching numerous
errors
Tony Luck for testing and debugging on IA64
Bob Picco for fixing bugs related to pfn registration, reviewing a
number of patch revisions, providing a number of suggestions
on future direction and testing heavily
Jack Steiner and Robin Holt for testing on IA64 and clarifying
issues related to memory holes
Yasunori for testing on IA64
Andi Kleen for reviewing and feeding back about x86_64
Christian Kujau for providing valuable information related to ACPI
problems on x86_64 and testing potential fixes
This patch:
Define the structure to represent an active range of page frames within a node
in an architecture independent manner. Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 12:49:43 +04:00
|
|
|
* free_area_init_nodes() passing in the PFN each zone ends at. At a basic
|
|
|
|
* usage, an architecture is expected to do something like
|
|
|
|
*
|
|
|
|
* unsigned long max_zone_pfns[MAX_NR_ZONES] = {max_dma, max_normal_pfn,
|
|
|
|
* max_highmem_pfn};
|
|
|
|
* for_each_valid_physical_page_range()
|
2011-12-08 22:22:09 +04:00
|
|
|
* memblock_add_node(base, size, nid)
|
[PATCH] Introduce mechanism for registering active regions of memory
At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate zone
sizes and holes in each architecture is very similar. Some of this zone and
hole sizing code is difficult to read for no good reason. This set of patches
eliminates the similar-looking architecture-specific code.
The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones. The zone sizes and holes are then calculated in an architecture
independent manner.
Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
It adjusts the watermarks slightly
Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on
IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.
There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.
The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.
Additional credit;
Dave Hansen for the initial suggestion and comments on early patches
Andy Whitcroft for reviewing early versions and catching numerous
errors
Tony Luck for testing and debugging on IA64
Bob Picco for fixing bugs related to pfn registration, reviewing a
number of patch revisions, providing a number of suggestions
on future direction and testing heavily
Jack Steiner and Robin Holt for testing on IA64 and clarifying
issues related to memory holes
Yasunori for testing on IA64
Andi Kleen for reviewing and feeding back about x86_64
Christian Kujau for providing valuable information related to ACPI
problems on x86_64 and testing potential fixes
This patch:
Define the structure to represent an active range of page frames within a node
in an architecture independent manner. Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 12:49:43 +04:00
|
|
|
* free_area_init_nodes(max_zone_pfns);
|
|
|
|
*
|
2011-12-08 22:22:09 +04:00
|
|
|
* free_bootmem_with_active_regions() calls free_bootmem_node() for each
|
|
|
|
* registered physical page range. Similarly
|
|
|
|
* sparse_memory_present_with_active_regions() calls memory_present() for
|
|
|
|
* each range when SPARSEMEM is enabled.
|
[PATCH] Introduce mechanism for registering active regions of memory
At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate zone
sizes and holes in each architecture is very similar. Some of this zone and
hole sizing code is difficult to read for no good reason. This set of patches
eliminates the similar-looking architecture-specific code.
The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones. The zone sizes and holes are then calculated in an architecture
independent manner.
Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
It adjusts the watermarks slightly
Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on
IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.
There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.
The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.
Additional credit;
Dave Hansen for the initial suggestion and comments on early patches
Andy Whitcroft for reviewing early versions and catching numerous
errors
Tony Luck for testing and debugging on IA64
Bob Picco for fixing bugs related to pfn registration, reviewing a
number of patch revisions, providing a number of suggestions
on future direction and testing heavily
Jack Steiner and Robin Holt for testing on IA64 and clarifying
issues related to memory holes
Yasunori for testing on IA64
Andi Kleen for reviewing and feeding back about x86_64
Christian Kujau for providing valuable information related to ACPI
problems on x86_64 and testing potential fixes
This patch:
Define the structure to represent an active range of page frames within a node
in an architecture independent manner. Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 12:49:43 +04:00
|
|
|
*
|
|
|
|
* See mm/page_alloc.c for more information on each function exposed by
|
2011-12-08 22:22:09 +04:00
|
|
|
* CONFIG_HAVE_MEMBLOCK_NODE_MAP.
|
[PATCH] Introduce mechanism for registering active regions of memory
At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate zone
sizes and holes in each architecture is very similar. Some of this zone and
hole sizing code is difficult to read for no good reason. This set of patches
eliminates the similar-looking architecture-specific code.
The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones. The zone sizes and holes are then calculated in an architecture
independent manner.
Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
It adjusts the watermarks slightly
Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on
IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.
There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.
The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.
Additional credit;
Dave Hansen for the initial suggestion and comments on early patches
Andy Whitcroft for reviewing early versions and catching numerous
errors
Tony Luck for testing and debugging on IA64
Bob Picco for fixing bugs related to pfn registration, reviewing a
number of patch revisions, providing a number of suggestions
on future direction and testing heavily
Jack Steiner and Robin Holt for testing on IA64 and clarifying
issues related to memory holes
Yasunori for testing on IA64
Andi Kleen for reviewing and feeding back about x86_64
Christian Kujau for providing valuable information related to ACPI
problems on x86_64 and testing potential fixes
This patch:
Define the structure to represent an active range of page frames within a node
in an architecture independent manner. Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 12:49:43 +04:00
|
|
|
*/
|
|
|
|
extern void free_area_init_nodes(unsigned long *max_zone_pfn);
|
x86, numa: Implement pfn -> nid mapping granularity check
SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use
sections array to map pfn to nid which is limited in granularity. If
NUMA nodes are laid out such that the mapping cannot be accurate, boot
will fail triggering BUG_ON() in mminit_verify_page_links().
On 32bit, it's 512MiB w/ PAE and SPARSEMEM. This seems to have been
granular enough until commit 2706a0bf7b (x86, NUMA: Enable
CONFIG_AMD_NUMA on 32bit too). Apparently, there is a machine which
aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT. This
led to the following BUG_ON().
On node 0 totalpages: 2096615
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3927 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 16405 pages used for memmap
HighMem zone: 1853533 pages, LIFO batch:31
BUG: Int 6: CR2 (null)
EDI (null) ESI 00000002 EBP 00000002 ESP c1543ecc
EBX f2400000 EDX 00000006 ECX (null) EAX 00000001
err (null) EIP c16209aa CS 00000060 flg 00010002
Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000
(null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe (null)
f7200b80 c16395f0 00200a02 f7200a80 (null) 000375fe 00000002 (null)
Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17
Call Trace:
[<c136b1e5>] ? early_fault+0x2e/0x2e
[<c16209aa>] ? mminit_verify_page_links+0x12/0x42
[<c1620613>] ? memmap_init_zone+0xaf/0x10c
[<c1620929>] ? free_area_init_node+0x2b9/0x2e3
[<c1607e99>] ? free_area_init_nodes+0x3f2/0x451
[<c1601d80>] ? paging_init+0x112/0x118
[<c15f578d>] ? setup_arch+0x791/0x82f
[<c15f43d9>] ? start_kernel+0x6a/0x257
This patch implements node_map_pfn_alignment() which determines
maximum internode alignment and update numa_register_memblks() to
reject NUMA configuration if alignment exceeds the pfn -> nid mapping
granularity of the memory model as determined by PAGES_PER_SECTION.
This makes the problematic machine boot w/ flatmem by rejecting the
NUMA config and provides protection against crazy NUMA configurations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org
LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com>
Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Conny Seidel <conny.seidel@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12 11:45:34 +04:00
|
|
|
unsigned long node_map_pfn_alignment(void);
|
x86: Fix checking of SRAT when node 0 ram is not from 0
Found one system that boot from socket1 instead of socket0, SRAT get rejected...
[ 0.000000] SRAT: Node 1 PXM 0 0-a0000
[ 0.000000] SRAT: Node 1 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 0 100000000-2080000000
[ 0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000
[ 0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000
[ 0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000
[ 0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000
[ 0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000
[ 0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000
[ 0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000
...
[ 0.000000] NUMA: Allocated memnodemap from 500000 - 701040
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used
[ 0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used
[ 0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used
[ 0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used
[ 0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used
[ 0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used
[ 0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used
[ 0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used
[ 0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used
[ 0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used
[ 0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used.
[ 0.000000] SRAT: SRAT not used.
the early_node_map is not sorted because node0 with non zero start come first.
so try to sort it right away after all regions are registered.
also fixs refression by 8716273c (x86: Export srat physical topology)
-v2: make it more solid to handle cross node case like node0 [0,4g), [8,12g) and node1 [4g, 8g), [12g, 16g)
-v3: update comments.
Reported-and-tested-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B2579D2.3010201@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16 04:59:02 +03:00
|
|
|
unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn,
|
|
|
|
unsigned long end_pfn);
|
[PATCH] Introduce mechanism for registering active regions of memory
At a basic level, architectures define structures to record where active
ranges of page frames are located. Once located, the code to calculate zone
sizes and holes in each architecture is very similar. Some of this zone and
hole sizing code is difficult to read for no good reason. This set of patches
eliminates the similar-looking architecture-specific code.
The patches introduce a mechanism where architectures register where the
active ranges of page frames are with add_active_range(). When all areas have
been discovered, free_area_init_nodes() is called to initialise the pgdat and
zones. The zone sizes and holes are then calculated in an architecture
independent manner.
Patch 1 introduces the mechanism for registering and initialising PFN ranges
Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed
Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed
Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed
Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed
Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable.
It adjusts the watermarks slightly
Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig,
gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on
IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based
machine. These were on patches against 2.6.17-rc1 and release 3 of these
patches but there have been no ia64-changes since release 3.
There are differences in the zone sizes for x86_64 as the arch-specific code
for x86_64 accounts the kernel image and the starting mem_maps as memory holes
but the architecture-independent code accounts the memory as present.
The big benefit of this set of patches is a sizable reduction of
architecture-specific code, some of which is very hairy. There should be a
greater reduction when other architectures use the same mechanisms for zone
and hole sizing but I lack the hardware to test on.
Additional credit;
Dave Hansen for the initial suggestion and comments on early patches
Andy Whitcroft for reviewing early versions and catching numerous
errors
Tony Luck for testing and debugging on IA64
Bob Picco for fixing bugs related to pfn registration, reviewing a
number of patch revisions, providing a number of suggestions
on future direction and testing heavily
Jack Steiner and Robin Holt for testing on IA64 and clarifying
issues related to memory holes
Yasunori for testing on IA64
Andi Kleen for reviewing and feeding back about x86_64
Christian Kujau for providing valuable information related to ACPI
problems on x86_64 and testing potential fixes
This patch:
Define the structure to represent an active range of page frames within a node
in an architecture independent manner. Architectures are expected to register
active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call
free_area_init_nodes() passing the PFNs of the end of each zone.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 12:49:43 +04:00
|
|
|
extern unsigned long absent_pages_in_range(unsigned long start_pfn,
|
|
|
|
unsigned long end_pfn);
|
|
|
|
extern void get_pfn_range_for_nid(unsigned int nid,
|
|
|
|
unsigned long *start_pfn, unsigned long *end_pfn);
|
|
|
|
extern unsigned long find_min_pfn_with_active_regions(void);
|
|
|
|
extern void free_bootmem_with_active_regions(int nid,
|
|
|
|
unsigned long max_low_pfn);
|
|
|
|
extern void sparse_memory_present_with_active_regions(int nid);
|
mm: clean up for early_pfn_to_nid()
What's happening is that the assertion in mm/page_alloc.c:move_freepages()
is triggering:
BUG_ON(page_zone(start_page) != page_zone(end_page));
Once I knew this is what was happening, I added some annotations:
if (unlikely(page_zone(start_page) != page_zone(end_page))) {
printk(KERN_ERR "move_freepages: Bogus zones: "
"start_page[%p] end_page[%p] zone[%p]\n",
start_page, end_page, zone);
printk(KERN_ERR "move_freepages: "
"start_zone[%p] end_zone[%p]\n",
page_zone(start_page), page_zone(end_page));
printk(KERN_ERR "move_freepages: "
"start_pfn[0x%lx] end_pfn[0x%lx]\n",
page_to_pfn(start_page), page_to_pfn(end_page));
printk(KERN_ERR "move_freepages: "
"start_nid[%d] end_nid[%d]\n",
page_to_nid(start_page), page_to_nid(end_page));
...
And here's what I got:
move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00]
move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00]
move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff]
move_freepages: start_nid[1] end_nid[0]
My memory layout on this box is:
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x0081ff5d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00020000
[ 0.000000] 1: 0x00800000 -> 0x0081f7ff
[ 0.000000] 1: 0x0081f800 -> 0x0081fe50
[ 0.000000] 1: 0x0081fed1 -> 0x0081fed8
[ 0.000000] 1: 0x0081feda -> 0x0081fedb
[ 0.000000] 1: 0x0081fedd -> 0x0081fee5
[ 0.000000] 1: 0x0081fee7 -> 0x0081ff51
[ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d
So it's a block move in that 0x81f600-->0x81f7ff region which triggers
the problem.
This patch:
Declaration of early_pfn_to_nid() is scattered over per-arch include
files, and it seems it's complicated to know when the declaration is used.
I think it makes fix-for-memmap-init not easy.
This patch moves all declaration to include/linux/mm.h
After this,
if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use static definition in include/linux/mm.h
else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use generic definition in mm/page_alloc.c
else
-> per-arch back end function will be called.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-19 01:48:32 +03:00
|
|
|
|
2011-12-08 22:22:09 +04:00
|
|
|
#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
|
mm: clean up for early_pfn_to_nid()
What's happening is that the assertion in mm/page_alloc.c:move_freepages()
is triggering:
BUG_ON(page_zone(start_page) != page_zone(end_page));
Once I knew this is what was happening, I added some annotations:
if (unlikely(page_zone(start_page) != page_zone(end_page))) {
printk(KERN_ERR "move_freepages: Bogus zones: "
"start_page[%p] end_page[%p] zone[%p]\n",
start_page, end_page, zone);
printk(KERN_ERR "move_freepages: "
"start_zone[%p] end_zone[%p]\n",
page_zone(start_page), page_zone(end_page));
printk(KERN_ERR "move_freepages: "
"start_pfn[0x%lx] end_pfn[0x%lx]\n",
page_to_pfn(start_page), page_to_pfn(end_page));
printk(KERN_ERR "move_freepages: "
"start_nid[%d] end_nid[%d]\n",
page_to_nid(start_page), page_to_nid(end_page));
...
And here's what I got:
move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00]
move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00]
move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff]
move_freepages: start_nid[1] end_nid[0]
My memory layout on this box is:
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x0081ff5d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00020000
[ 0.000000] 1: 0x00800000 -> 0x0081f7ff
[ 0.000000] 1: 0x0081f800 -> 0x0081fe50
[ 0.000000] 1: 0x0081fed1 -> 0x0081fed8
[ 0.000000] 1: 0x0081feda -> 0x0081fedb
[ 0.000000] 1: 0x0081fedd -> 0x0081fee5
[ 0.000000] 1: 0x0081fee7 -> 0x0081ff51
[ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d
So it's a block move in that 0x81f600-->0x81f7ff region which triggers
the problem.
This patch:
Declaration of early_pfn_to_nid() is scattered over per-arch include
files, and it seems it's complicated to know when the declaration is used.
I think it makes fix-for-memmap-init not easy.
This patch moves all declaration to include/linux/mm.h
After this,
if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use static definition in include/linux/mm.h
else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use generic definition in mm/page_alloc.c
else
-> per-arch back end function will be called.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-19 01:48:32 +03:00
|
|
|
|
2011-12-08 22:22:09 +04:00
|
|
|
#if !defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) && \
|
mm: clean up for early_pfn_to_nid()
What's happening is that the assertion in mm/page_alloc.c:move_freepages()
is triggering:
BUG_ON(page_zone(start_page) != page_zone(end_page));
Once I knew this is what was happening, I added some annotations:
if (unlikely(page_zone(start_page) != page_zone(end_page))) {
printk(KERN_ERR "move_freepages: Bogus zones: "
"start_page[%p] end_page[%p] zone[%p]\n",
start_page, end_page, zone);
printk(KERN_ERR "move_freepages: "
"start_zone[%p] end_zone[%p]\n",
page_zone(start_page), page_zone(end_page));
printk(KERN_ERR "move_freepages: "
"start_pfn[0x%lx] end_pfn[0x%lx]\n",
page_to_pfn(start_page), page_to_pfn(end_page));
printk(KERN_ERR "move_freepages: "
"start_nid[%d] end_nid[%d]\n",
page_to_nid(start_page), page_to_nid(end_page));
...
And here's what I got:
move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00]
move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00]
move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff]
move_freepages: start_nid[1] end_nid[0]
My memory layout on this box is:
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x0081ff5d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00020000
[ 0.000000] 1: 0x00800000 -> 0x0081f7ff
[ 0.000000] 1: 0x0081f800 -> 0x0081fe50
[ 0.000000] 1: 0x0081fed1 -> 0x0081fed8
[ 0.000000] 1: 0x0081feda -> 0x0081fedb
[ 0.000000] 1: 0x0081fedd -> 0x0081fee5
[ 0.000000] 1: 0x0081fee7 -> 0x0081ff51
[ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d
So it's a block move in that 0x81f600-->0x81f7ff region which triggers
the problem.
This patch:
Declaration of early_pfn_to_nid() is scattered over per-arch include
files, and it seems it's complicated to know when the declaration is used.
I think it makes fix-for-memmap-init not easy.
This patch moves all declaration to include/linux/mm.h
After this,
if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use static definition in include/linux/mm.h
else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use generic definition in mm/page_alloc.c
else
-> per-arch back end function will be called.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-19 01:48:32 +03:00
|
|
|
!defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID)
|
2015-07-01 00:56:55 +03:00
|
|
|
static inline int __early_pfn_to_nid(unsigned long pfn,
|
|
|
|
struct mminit_pfnnid_cache *state)
|
mm: clean up for early_pfn_to_nid()
What's happening is that the assertion in mm/page_alloc.c:move_freepages()
is triggering:
BUG_ON(page_zone(start_page) != page_zone(end_page));
Once I knew this is what was happening, I added some annotations:
if (unlikely(page_zone(start_page) != page_zone(end_page))) {
printk(KERN_ERR "move_freepages: Bogus zones: "
"start_page[%p] end_page[%p] zone[%p]\n",
start_page, end_page, zone);
printk(KERN_ERR "move_freepages: "
"start_zone[%p] end_zone[%p]\n",
page_zone(start_page), page_zone(end_page));
printk(KERN_ERR "move_freepages: "
"start_pfn[0x%lx] end_pfn[0x%lx]\n",
page_to_pfn(start_page), page_to_pfn(end_page));
printk(KERN_ERR "move_freepages: "
"start_nid[%d] end_nid[%d]\n",
page_to_nid(start_page), page_to_nid(end_page));
...
And here's what I got:
move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00]
move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00]
move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff]
move_freepages: start_nid[1] end_nid[0]
My memory layout on this box is:
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x0081ff5d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00020000
[ 0.000000] 1: 0x00800000 -> 0x0081f7ff
[ 0.000000] 1: 0x0081f800 -> 0x0081fe50
[ 0.000000] 1: 0x0081fed1 -> 0x0081fed8
[ 0.000000] 1: 0x0081feda -> 0x0081fedb
[ 0.000000] 1: 0x0081fedd -> 0x0081fee5
[ 0.000000] 1: 0x0081fee7 -> 0x0081ff51
[ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d
So it's a block move in that 0x81f600-->0x81f7ff region which triggers
the problem.
This patch:
Declaration of early_pfn_to_nid() is scattered over per-arch include
files, and it seems it's complicated to know when the declaration is used.
I think it makes fix-for-memmap-init not easy.
This patch moves all declaration to include/linux/mm.h
After this,
if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use static definition in include/linux/mm.h
else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use generic definition in mm/page_alloc.c
else
-> per-arch back end function will be called.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-19 01:48:32 +03:00
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
/* please see mm/page_alloc.c */
|
|
|
|
extern int __meminit early_pfn_to_nid(unsigned long pfn);
|
|
|
|
/* there is a per-arch backend function. */
|
2015-07-01 00:56:55 +03:00
|
|
|
extern int __meminit __early_pfn_to_nid(unsigned long pfn,
|
|
|
|
struct mminit_pfnnid_cache *state);
|
mm: clean up for early_pfn_to_nid()
What's happening is that the assertion in mm/page_alloc.c:move_freepages()
is triggering:
BUG_ON(page_zone(start_page) != page_zone(end_page));
Once I knew this is what was happening, I added some annotations:
if (unlikely(page_zone(start_page) != page_zone(end_page))) {
printk(KERN_ERR "move_freepages: Bogus zones: "
"start_page[%p] end_page[%p] zone[%p]\n",
start_page, end_page, zone);
printk(KERN_ERR "move_freepages: "
"start_zone[%p] end_zone[%p]\n",
page_zone(start_page), page_zone(end_page));
printk(KERN_ERR "move_freepages: "
"start_pfn[0x%lx] end_pfn[0x%lx]\n",
page_to_pfn(start_page), page_to_pfn(end_page));
printk(KERN_ERR "move_freepages: "
"start_nid[%d] end_nid[%d]\n",
page_to_nid(start_page), page_to_nid(end_page));
...
And here's what I got:
move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00]
move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00]
move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff]
move_freepages: start_nid[1] end_nid[0]
My memory layout on this box is:
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x0081ff5d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00020000
[ 0.000000] 1: 0x00800000 -> 0x0081f7ff
[ 0.000000] 1: 0x0081f800 -> 0x0081fe50
[ 0.000000] 1: 0x0081fed1 -> 0x0081fed8
[ 0.000000] 1: 0x0081feda -> 0x0081fedb
[ 0.000000] 1: 0x0081fedd -> 0x0081fee5
[ 0.000000] 1: 0x0081fee7 -> 0x0081ff51
[ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d
So it's a block move in that 0x81f600-->0x81f7ff region which triggers
the problem.
This patch:
Declaration of early_pfn_to_nid() is scattered over per-arch include
files, and it seems it's complicated to know when the declaration is used.
I think it makes fix-for-memmap-init not easy.
This patch moves all declaration to include/linux/mm.h
After this,
if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use static definition in include/linux/mm.h
else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-> Use generic definition in mm/page_alloc.c
else
-> per-arch back end function will be called.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-19 01:48:32 +03:00
|
|
|
#endif
|
|
|
|
|
mm: zero reserved and unavailable struct pages
Some memory is reserved but unavailable: not present in memblock.memory
(because not backed by physical pages), but present in memblock.reserved.
Such memory has backing struct pages, but they are not initialized by
going through __init_single_page().
In some cases these struct pages are accessed even if they do not
contain any data. One example is page_to_pfn() might access page->flags
if this is where section information is stored (CONFIG_SPARSEMEM,
SECTION_IN_PAGE_FLAGS).
One example of such memory: trim_low_memory_range() unconditionally
reserves from pfn 0, but e820__memblock_setup() might provide the
exiting memory from pfn 1 (i.e. KVM).
Since struct pages are zeroed in __init_single_page(), and not during
allocation time, we must zero such struct pages explicitly.
The patch involves adding a new memblock iterator:
for_each_resv_unavail_range(i, p_start, p_end)
Which iterates through reserved && !memory lists, and we zero struct pages
explicitly by calling mm_zero_struct_page().
===
Here is more detailed example of problem that this patch is addressing:
Run tested on qemu with the following arguments:
-enable-kvm -cpu kvm64 -m 512 -smp 2
This patch reports that there are 98 unavailable pages.
They are: pfn 0 and pfns in range [159, 255].
Note, trim_low_memory_range() reserves only pfns in range [0, 15], it does
not reserve [159, 255] ones.
e820__memblock_setup() reports linux that the following physical ranges are
available:
[1 , 158]
[256, 130783]
Notice, that exactly unavailable pfns are missing!
Now, lets check what we have in zone 0: [1, 131039]
pfn 0, is not part of the zone, but pfns [1, 158], are.
However, the bigger problem we have if we do not initialize these struct
pages is with memory hotplug. Because, that path operates at 2M
boundaries (section_nr). And checks if 2M range of pages is hot
removable. It starts with first pfn from zone, rounds it down to 2M
boundary (sturct pages are allocated at 2M boundaries when vmemmap is
created), and checks if that section is hot removable. In this case
start with pfn 1 and convert it down to pfn 0. Later pfn is converted
to struct page, and some fields are checked. Now, if we do not zero
struct pages, we get unpredictable results.
In fact when CONFIG_VM_DEBUG is enabled, and we explicitly set all
vmemmap memory to ones, the following panic is observed with kernel test
without this patch applied:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: is_pageblock_removable_nolock+0x35/0x90
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT
...
task: ffff88001f4e2900 task.stack: ffffc90000314000
RIP: 0010:is_pageblock_removable_nolock+0x35/0x90
Call Trace:
? is_mem_section_removable+0x5a/0xd0
show_mem_removable+0x6b/0xa0
dev_attr_show+0x1b/0x50
sysfs_kf_seq_show+0xa1/0x100
kernfs_seq_show+0x22/0x30
seq_read+0x1ac/0x3a0
kernfs_fop_read+0x36/0x190
? security_file_permission+0x90/0xb0
__vfs_read+0x16/0x30
vfs_read+0x81/0x130
SyS_read+0x44/0xa0
entry_SYSCALL_64_fastpath+0x1f/0xbd
Link: http://lkml.kernel.org/r/20171013173214.27300-7-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Tested-by: Bob Picco <bob.picco@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 04:36:31 +03:00
|
|
|
#ifdef CONFIG_HAVE_MEMBLOCK
|
|
|
|
void zero_resv_unavail(void);
|
|
|
|
#else
|
|
|
|
static inline void zero_resv_unavail(void) {}
|
|
|
|
#endif
|
|
|
|
|
2006-09-27 12:49:56 +04:00
|
|
|
extern void set_dma_reserve(unsigned long new_dma_reserve);
|
2017-12-29 10:53:57 +03:00
|
|
|
extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long,
|
|
|
|
enum memmap_context, struct vmem_altmap *);
|
2009-06-17 02:32:48 +04:00
|
|
|
extern void setup_per_zone_wmarks(void);
|
2011-05-25 04:11:32 +04:00
|
|
|
extern int __meminit init_per_zone_wmark_min(void);
|
2005-04-17 02:20:36 +04:00
|
|
|
extern void mem_init(void);
|
2009-01-08 15:04:47 +03:00
|
|
|
extern void __init mmap_init(void);
|
2017-02-23 02:46:16 +03:00
|
|
|
extern void show_mem(unsigned int flags, nodemask_t *nodemask);
|
2016-03-18 00:19:05 +03:00
|
|
|
extern long si_mem_available(void);
|
2005-04-17 02:20:36 +04:00
|
|
|
extern void si_meminfo(struct sysinfo * val);
|
|
|
|
extern void si_meminfo_node(struct sysinfo *val, int nid);
|
2016-10-08 02:59:15 +03:00
|
|
|
#ifdef __HAVE_ARCH_RESERVED_KERNEL_PAGES
|
|
|
|
extern unsigned long arch_reserved_kernel_pages(void);
|
|
|
|
#endif
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2017-02-23 02:46:10 +03:00
|
|
|
extern __printf(3, 4)
|
|
|
|
void warn_alloc(gfp_t gfp_mask, nodemask_t *nodemask, const char *fmt, ...);
|
2011-05-25 04:12:16 +04:00
|
|
|
|
2005-06-22 04:14:47 +04:00
|
|
|
extern void setup_per_cpu_pageset(void);
|
|
|
|
|
2009-09-22 04:01:16 +04:00
|
|
|
extern void zone_pcp_update(struct zone *zone);
|
2012-08-01 03:43:32 +04:00
|
|
|
extern void zone_pcp_reset(struct zone *zone);
|
2009-09-22 04:01:16 +04:00
|
|
|
|
2013-02-23 04:34:42 +04:00
|
|
|
/* page_alloc.c */
|
|
|
|
extern int min_free_kbytes;
|
2016-03-18 00:19:14 +03:00
|
|
|
extern int watermark_scale_factor;
|
2013-02-23 04:34:42 +04:00
|
|
|
|
2009-01-08 15:04:47 +03:00
|
|
|
/* nommu.c */
|
2009-04-03 03:56:32 +04:00
|
|
|
extern atomic_long_t mmap_pages_allocated;
|
nommu: fix shared mmap after truncate shrinkage problems
Fix a problem in NOMMU mmap with ramfs whereby a shared mmap can happen
over the end of a truncation. The problem is that
ramfs_nommu_check_mappings() checks that the reduced file size against the
VMA tree, but not the vm_region tree.
The following sequence of events can cause the problem:
fd = open("/tmp/x", O_RDWR|O_TRUNC|O_CREAT, 0600);
ftruncate(fd, 32 * 1024);
a = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
b = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
munmap(a, 32 * 1024);
ftruncate(fd, 16 * 1024);
c = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
Mapping 'a' creates a vm_region covering 32KB of the file. Mapping 'b'
sees that the vm_region from 'a' is covering the region it wants and so
shares it, pinning it in memory.
Mapping 'a' then goes away and the file is truncated to the end of VMA
'b'. However, the region allocated by 'a' is still in effect, and has
_not_ been reduced.
Mapping 'c' is then created, and because there's a vm_region covering the
desired region, get_unmapped_area() is _not_ called to repeat the check,
and the mapping is granted, even though the pages from the latter half of
the mapping have been discarded.
However:
d = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
Mapping 'd' should work, and should end up sharing the region allocated by
'a'.
To deal with this, we shrink the vm_region struct during the truncation,
lest do_mmap_pgoff() take it as licence to share the full region
automatically without calling the get_unmapped_area() file op again.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-16 04:01:39 +03:00
|
|
|
extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t);
|
2009-01-08 15:04:47 +03:00
|
|
|
|
2012-10-09 03:31:25 +04:00
|
|
|
/* interval_tree.c */
|
|
|
|
void vma_interval_tree_insert(struct vm_area_struct *node,
|
2017-09-09 02:15:08 +03:00
|
|
|
struct rb_root_cached *root);
|
2012-10-09 03:31:35 +04:00
|
|
|
void vma_interval_tree_insert_after(struct vm_area_struct *node,
|
|
|
|
struct vm_area_struct *prev,
|
2017-09-09 02:15:08 +03:00
|
|
|
struct rb_root_cached *root);
|
2012-10-09 03:31:25 +04:00
|
|
|
void vma_interval_tree_remove(struct vm_area_struct *node,
|
2017-09-09 02:15:08 +03:00
|
|
|
struct rb_root_cached *root);
|
|
|
|
struct vm_area_struct *vma_interval_tree_iter_first(struct rb_root_cached *root,
|
2012-10-09 03:31:25 +04:00
|
|
|
unsigned long start, unsigned long last);
|
|
|
|
struct vm_area_struct *vma_interval_tree_iter_next(struct vm_area_struct *node,
|
|
|
|
unsigned long start, unsigned long last);
|
|
|
|
|
|
|
|
#define vma_interval_tree_foreach(vma, root, start, last) \
|
|
|
|
for (vma = vma_interval_tree_iter_first(root, start, last); \
|
|
|
|
vma; vma = vma_interval_tree_iter_next(vma, start, last))
|
2005-04-17 02:20:36 +04:00
|
|
|
|
mm anon rmap: replace same_anon_vma linked list with an interval tree.
When a large VMA (anon or private file mapping) is first touched, which
will populate its anon_vma field, and then split into many regions through
the use of mprotect(), the original anon_vma ends up linking all of the
vmas on a linked list. This can cause rmap to become inefficient, as we
have to walk potentially thousands of irrelevent vmas before finding the
one a given anon page might fall into.
By replacing the same_anon_vma linked list with an interval tree (where
each avc's interval is determined by its vma's start and last pgoffs), we
can make rmap efficient for this use case again.
While the change is large, all of its pieces are fairly simple.
Most places that were walking the same_anon_vma list were looking for a
known pgoff, so they can just use the anon_vma_interval_tree_foreach()
interval tree iterator instead. The exception here is ksm, where the
page's index is not known. It would probably be possible to rework ksm so
that the index would be known, but for now I have decided to keep things
simple and just walk the entirety of the interval tree there.
When updating vma's that already have an anon_vma assigned, we must take
care to re-index the corresponding avc's on their interval tree. This is
done through the use of anon_vma_interval_tree_pre_update_vma() and
anon_vma_interval_tree_post_update_vma(), which remove the avc's from
their interval tree before the update and re-insert them after the update.
The anon_vma stays locked during the update, so there is no chance that
rmap would miss the vmas that are being updated.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 03:31:39 +04:00
|
|
|
void anon_vma_interval_tree_insert(struct anon_vma_chain *node,
|
2017-09-09 02:15:08 +03:00
|
|
|
struct rb_root_cached *root);
|
mm anon rmap: replace same_anon_vma linked list with an interval tree.
When a large VMA (anon or private file mapping) is first touched, which
will populate its anon_vma field, and then split into many regions through
the use of mprotect(), the original anon_vma ends up linking all of the
vmas on a linked list. This can cause rmap to become inefficient, as we
have to walk potentially thousands of irrelevent vmas before finding the
one a given anon page might fall into.
By replacing the same_anon_vma linked list with an interval tree (where
each avc's interval is determined by its vma's start and last pgoffs), we
can make rmap efficient for this use case again.
While the change is large, all of its pieces are fairly simple.
Most places that were walking the same_anon_vma list were looking for a
known pgoff, so they can just use the anon_vma_interval_tree_foreach()
interval tree iterator instead. The exception here is ksm, where the
page's index is not known. It would probably be possible to rework ksm so
that the index would be known, but for now I have decided to keep things
simple and just walk the entirety of the interval tree there.
When updating vma's that already have an anon_vma assigned, we must take
care to re-index the corresponding avc's on their interval tree. This is
done through the use of anon_vma_interval_tree_pre_update_vma() and
anon_vma_interval_tree_post_update_vma(), which remove the avc's from
their interval tree before the update and re-insert them after the update.
The anon_vma stays locked during the update, so there is no chance that
rmap would miss the vmas that are being updated.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 03:31:39 +04:00
|
|
|
void anon_vma_interval_tree_remove(struct anon_vma_chain *node,
|
2017-09-09 02:15:08 +03:00
|
|
|
struct rb_root_cached *root);
|
|
|
|
struct anon_vma_chain *
|
|
|
|
anon_vma_interval_tree_iter_first(struct rb_root_cached *root,
|
|
|
|
unsigned long start, unsigned long last);
|
mm anon rmap: replace same_anon_vma linked list with an interval tree.
When a large VMA (anon or private file mapping) is first touched, which
will populate its anon_vma field, and then split into many regions through
the use of mprotect(), the original anon_vma ends up linking all of the
vmas on a linked list. This can cause rmap to become inefficient, as we
have to walk potentially thousands of irrelevent vmas before finding the
one a given anon page might fall into.
By replacing the same_anon_vma linked list with an interval tree (where
each avc's interval is determined by its vma's start and last pgoffs), we
can make rmap efficient for this use case again.
While the change is large, all of its pieces are fairly simple.
Most places that were walking the same_anon_vma list were looking for a
known pgoff, so they can just use the anon_vma_interval_tree_foreach()
interval tree iterator instead. The exception here is ksm, where the
page's index is not known. It would probably be possible to rework ksm so
that the index would be known, but for now I have decided to keep things
simple and just walk the entirety of the interval tree there.
When updating vma's that already have an anon_vma assigned, we must take
care to re-index the corresponding avc's on their interval tree. This is
done through the use of anon_vma_interval_tree_pre_update_vma() and
anon_vma_interval_tree_post_update_vma(), which remove the avc's from
their interval tree before the update and re-insert them after the update.
The anon_vma stays locked during the update, so there is no chance that
rmap would miss the vmas that are being updated.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 03:31:39 +04:00
|
|
|
struct anon_vma_chain *anon_vma_interval_tree_iter_next(
|
|
|
|
struct anon_vma_chain *node, unsigned long start, unsigned long last);
|
2012-10-09 03:31:45 +04:00
|
|
|
#ifdef CONFIG_DEBUG_VM_RB
|
|
|
|
void anon_vma_interval_tree_verify(struct anon_vma_chain *node);
|
|
|
|
#endif
|
mm anon rmap: replace same_anon_vma linked list with an interval tree.
When a large VMA (anon or private file mapping) is first touched, which
will populate its anon_vma field, and then split into many regions through
the use of mprotect(), the original anon_vma ends up linking all of the
vmas on a linked list. This can cause rmap to become inefficient, as we
have to walk potentially thousands of irrelevent vmas before finding the
one a given anon page might fall into.
By replacing the same_anon_vma linked list with an interval tree (where
each avc's interval is determined by its vma's start and last pgoffs), we
can make rmap efficient for this use case again.
While the change is large, all of its pieces are fairly simple.
Most places that were walking the same_anon_vma list were looking for a
known pgoff, so they can just use the anon_vma_interval_tree_foreach()
interval tree iterator instead. The exception here is ksm, where the
page's index is not known. It would probably be possible to rework ksm so
that the index would be known, but for now I have decided to keep things
simple and just walk the entirety of the interval tree there.
When updating vma's that already have an anon_vma assigned, we must take
care to re-index the corresponding avc's on their interval tree. This is
done through the use of anon_vma_interval_tree_pre_update_vma() and
anon_vma_interval_tree_post_update_vma(), which remove the avc's from
their interval tree before the update and re-insert them after the update.
The anon_vma stays locked during the update, so there is no chance that
rmap would miss the vmas that are being updated.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 03:31:39 +04:00
|
|
|
|
|
|
|
#define anon_vma_interval_tree_foreach(avc, root, start, last) \
|
|
|
|
for (avc = anon_vma_interval_tree_iter_first(root, start, last); \
|
|
|
|
avc; avc = anon_vma_interval_tree_iter_next(avc, start, last))
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/* mmap.c */
|
2007-08-23 01:01:28 +04:00
|
|
|
extern int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin);
|
mm: vma_merge: fix vm_page_prot SMP race condition against rmap_walk
The rmap_walk can access vm_page_prot (and potentially vm_flags in the
pte/pmd manipulations). So it's not safe to wait the caller to update
the vm_page_prot/vm_flags after vma_merge returned potentially removing
the "next" vma and extending the "current" vma over the
next->vm_start,vm_end range, but still with the "current" vma
vm_page_prot, after releasing the rmap locks.
The vm_page_prot/vm_flags must be transferred from the "next" vma to the
current vma while vma_merge still holds the rmap locks.
The side effect of this race condition is pte corruption during migrate
as remove_migration_ptes when run on a address of the "next" vma that
got removed, used the vm_page_prot of the current vma.
migrate mprotect
------------ -------------
migrating in "next" vma
vma_merge() # removes "next" vma and
# extends "current" vma
# current vma is not with
# vm_page_prot updated
remove_migration_ptes
read vm_page_prot of current "vma"
establish pte with wrong permissions
vm_set_page_prot(vma) # too late!
change_protection in the old vma range
only, next range is not updated
This caused segmentation faults and potentially memory corruption in
heavy mprotect loads with some light page migration caused by compaction
in the background.
Hugh Dickins pointed out the comment about the Odd case 8 in vma_merge
which confirms the case 8 is only buggy one where the race can trigger,
in all other vma_merge cases the above cannot happen.
This fix removes the oddness factor from case 8 and it converts it from:
AAAA
PPPPNNNNXXXX -> PPPPNNNNNNNN
to:
AAAA
PPPPNNNNXXXX -> PPPPXXXXXXXX
XXXX has the right vma properties for the whole merged vma returned by
vma_adjust, so it solves the problem fully. It has the added benefits
that the callers could stop updating vma properties when vma_merge
succeeds however the callers are not updated by this patch (there are
bits like VM_SOFTDIRTY that still need special care for the whole range,
as the vma merging ignores them, but as long as they're not processed by
rmap walks and instead they're accessed with the mmap_sem at least for
reading, they are fine not to be updated within vma_adjust before
releasing the rmap_locks).
Link: http://lkml.kernel.org/r/1474309513-20313-1-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Aditya Mandaleeka <adityam@microsoft.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Vorlicek <janvorli@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 03:01:28 +03:00
|
|
|
extern int __vma_adjust(struct vm_area_struct *vma, unsigned long start,
|
|
|
|
unsigned long end, pgoff_t pgoff, struct vm_area_struct *insert,
|
|
|
|
struct vm_area_struct *expand);
|
|
|
|
static inline int vma_adjust(struct vm_area_struct *vma, unsigned long start,
|
|
|
|
unsigned long end, pgoff_t pgoff, struct vm_area_struct *insert)
|
|
|
|
{
|
|
|
|
return __vma_adjust(vma, start, end, pgoff, insert, NULL);
|
|
|
|
}
|
2005-04-17 02:20:36 +04:00
|
|
|
extern struct vm_area_struct *vma_merge(struct mm_struct *,
|
|
|
|
struct vm_area_struct *prev, unsigned long addr, unsigned long end,
|
|
|
|
unsigned long vm_flags, struct anon_vma *, struct file *, pgoff_t,
|
2015-09-05 01:46:24 +03:00
|
|
|
struct mempolicy *, struct vm_userfaultfd_ctx);
|
2005-04-17 02:20:36 +04:00
|
|
|
extern struct anon_vma *find_mergeable_anon_vma(struct vm_area_struct *);
|
2017-02-25 01:58:47 +03:00
|
|
|
extern int __split_vma(struct mm_struct *, struct vm_area_struct *,
|
|
|
|
unsigned long addr, int new_below);
|
|
|
|
extern int split_vma(struct mm_struct *, struct vm_area_struct *,
|
|
|
|
unsigned long addr, int new_below);
|
2005-04-17 02:20:36 +04:00
|
|
|
extern int insert_vm_struct(struct mm_struct *, struct vm_area_struct *);
|
|
|
|
extern void __vma_link_rb(struct mm_struct *, struct vm_area_struct *,
|
|
|
|
struct rb_node **, struct rb_node *);
|
2005-10-30 04:15:57 +03:00
|
|
|
extern void unlink_file_vma(struct vm_area_struct *);
|
2005-04-17 02:20:36 +04:00
|
|
|
extern struct vm_area_struct *copy_vma(struct vm_area_struct **,
|
2012-10-09 03:31:50 +04:00
|
|
|
unsigned long addr, unsigned long len, pgoff_t pgoff,
|
|
|
|
bool *need_rmap_locks);
|
2005-04-17 02:20:36 +04:00
|
|
|
extern void exit_mmap(struct mm_struct *);
|
2008-04-29 12:01:36 +04:00
|
|
|
|
2014-10-10 02:27:29 +04:00
|
|
|
static inline int check_data_rlimit(unsigned long rlim,
|
|
|
|
unsigned long new,
|
|
|
|
unsigned long start,
|
|
|
|
unsigned long end_data,
|
|
|
|
unsigned long start_data)
|
|
|
|
{
|
|
|
|
if (rlim < RLIM_INFINITY) {
|
|
|
|
if (((new - start) + (end_data - start_data)) > rlim)
|
|
|
|
return -ENOSPC;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-07-29 02:46:26 +04:00
|
|
|
extern int mm_take_all_locks(struct mm_struct *mm);
|
|
|
|
extern void mm_drop_all_locks(struct mm_struct *mm);
|
|
|
|
|
2011-05-27 03:25:46 +04:00
|
|
|
extern void set_mm_exe_file(struct mm_struct *mm, struct file *new_exe_file);
|
|
|
|
extern struct file *get_mm_exe_file(struct mm_struct *mm);
|
2016-08-23 17:20:38 +03:00
|
|
|
extern struct file *get_task_exe_file(struct task_struct *task);
|
2008-04-29 12:01:36 +04:00
|
|
|
|
2016-01-15 02:22:07 +03:00
|
|
|
extern bool may_expand_vm(struct mm_struct *, vm_flags_t, unsigned long npages);
|
|
|
|
extern void vm_stat_account(struct mm_struct *, vm_flags_t, long npages);
|
|
|
|
|
2016-09-05 16:33:05 +03:00
|
|
|
extern bool vma_is_special_mapping(const struct vm_area_struct *vma,
|
|
|
|
const struct vm_special_mapping *sm);
|
2014-03-18 02:22:02 +04:00
|
|
|
extern struct vm_area_struct *_install_special_mapping(struct mm_struct *mm,
|
|
|
|
unsigned long addr, unsigned long len,
|
2014-05-20 02:58:33 +04:00
|
|
|
unsigned long flags,
|
|
|
|
const struct vm_special_mapping *spec);
|
|
|
|
/* This is an obsolete alternative to _install_special_mapping. */
|
2007-02-09 01:20:41 +03:00
|
|
|
extern int install_special_mapping(struct mm_struct *mm,
|
|
|
|
unsigned long addr, unsigned long len,
|
|
|
|
unsigned long flags, struct page **pages);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
|
|
|
|
|
2007-07-16 10:38:26 +04:00
|
|
|
extern unsigned long mmap_region(struct file *file, unsigned long addr,
|
2017-02-25 01:58:22 +03:00
|
|
|
unsigned long len, vm_flags_t vm_flags, unsigned long pgoff,
|
|
|
|
struct list_head *uf);
|
2015-09-10 01:39:29 +03:00
|
|
|
extern unsigned long do_mmap(struct file *file, unsigned long addr,
|
2013-02-23 04:32:37 +04:00
|
|
|
unsigned long len, unsigned long prot, unsigned long flags,
|
2017-02-25 01:58:22 +03:00
|
|
|
vm_flags_t vm_flags, unsigned long pgoff, unsigned long *populate,
|
|
|
|
struct list_head *uf);
|
|
|
|
extern int do_munmap(struct mm_struct *, unsigned long, size_t,
|
|
|
|
struct list_head *uf);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2015-09-10 01:39:29 +03:00
|
|
|
static inline unsigned long
|
|
|
|
do_mmap_pgoff(struct file *file, unsigned long addr,
|
|
|
|
unsigned long len, unsigned long prot, unsigned long flags,
|
2017-02-25 01:58:22 +03:00
|
|
|
unsigned long pgoff, unsigned long *populate,
|
|
|
|
struct list_head *uf)
|
2015-09-10 01:39:29 +03:00
|
|
|
{
|
2017-02-25 01:58:22 +03:00
|
|
|
return do_mmap(file, addr, len, prot, flags, 0, pgoff, populate, uf);
|
2015-09-10 01:39:29 +03:00
|
|
|
}
|
|
|
|
|
2013-02-23 04:32:37 +04:00
|
|
|
#ifdef CONFIG_MMU
|
|
|
|
extern int __mm_populate(unsigned long addr, unsigned long len,
|
|
|
|
int ignore_errors);
|
|
|
|
static inline void mm_populate(unsigned long addr, unsigned long len)
|
|
|
|
{
|
|
|
|
/* Ignore errors */
|
|
|
|
(void) __mm_populate(addr, len, 1);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void mm_populate(unsigned long addr, unsigned long len) {}
|
|
|
|
#endif
|
|
|
|
|
2012-04-21 02:35:40 +04:00
|
|
|
/* These take the mm semaphore themselves */
|
2016-05-28 01:57:31 +03:00
|
|
|
extern int __must_check vm_brk(unsigned long, unsigned long);
|
powerpc: do not make the entire heap executable
On 32-bit powerpc the ELF PLT sections of binaries (built with
--bss-plt, or with a toolchain which defaults to it) look like this:
[17] .sbss NOBITS 0002aff8 01aff8 000014 00 WA 0 0 4
[18] .plt NOBITS 0002b00c 01aff8 000084 00 WAX 0 0 4
[19] .bss NOBITS 0002b090 01aff8 0000a4 00 WA 0 0 4
Which results in an ELF load header:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x019c70 0x00029c70 0x00029c70 0x01388 0x014c4 RWE 0x10000
This is all correct, the load region containing the PLT is marked as
executable. Note that the PLT starts at 0002b00c but the file mapping
ends at 0002aff8, so the PLT falls in the 0 fill section described by
the load header, and after a page boundary.
Unfortunately the generic ELF loader ignores the X bit in the load
headers when it creates the 0 filled non-file backed mappings. It
assumes all of these mappings are RW BSS sections, which is not the case
for PPC.
gcc/ld has an option (--secure-plt) to not do this, this is said to
incur a small performance penalty.
Currently, to support 32-bit binaries with PLT in BSS kernel maps
*entire brk area* with executable rights for all binaries, even
--secure-plt ones.
Stop doing that.
Teach the ELF loader to check the X bit in the relevant load header and
create 0 filled anonymous mappings that are executable if the load
header requests that.
Test program showing the difference in /proc/$PID/maps:
int main() {
char buf[16*1024];
char *p = malloc(123); /* make "[heap]" mapping appear */
int fd = open("/proc/self/maps", O_RDONLY);
int len = read(fd, buf, sizeof(buf));
write(1, buf, len);
printf("%p\n", p);
return 0;
}
Compiled using: gcc -mbss-plt -m32 -Os test.c -otest
Unpatched ppc64 kernel:
00100000-00120000 r-xp 00000000 00:00 0 [vdso]
0fe10000-0ffd0000 r-xp 00000000 fd:00 67898094 /usr/lib/libc-2.17.so
0ffd0000-0ffe0000 r--p 001b0000 fd:00 67898094 /usr/lib/libc-2.17.so
0ffe0000-0fff0000 rw-p 001c0000 fd:00 67898094 /usr/lib/libc-2.17.so
10000000-10010000 r-xp 00000000 fd:00 100674505 /home/user/test
10010000-10020000 r--p 00000000 fd:00 100674505 /home/user/test
10020000-10030000 rw-p 00010000 fd:00 100674505 /home/user/test
10690000-106c0000 rwxp 00000000 00:00 0 [heap]
f7f70000-f7fa0000 r-xp 00000000 fd:00 67898089 /usr/lib/ld-2.17.so
f7fa0000-f7fb0000 r--p 00020000 fd:00 67898089 /usr/lib/ld-2.17.so
f7fb0000-f7fc0000 rw-p 00030000 fd:00 67898089 /usr/lib/ld-2.17.so
ffa90000-ffac0000 rw-p 00000000 00:00 0 [stack]
0x10690008
Patched ppc64 kernel:
00100000-00120000 r-xp 00000000 00:00 0 [vdso]
0fe10000-0ffd0000 r-xp 00000000 fd:00 67898094 /usr/lib/libc-2.17.so
0ffd0000-0ffe0000 r--p 001b0000 fd:00 67898094 /usr/lib/libc-2.17.so
0ffe0000-0fff0000 rw-p 001c0000 fd:00 67898094 /usr/lib/libc-2.17.so
10000000-10010000 r-xp 00000000 fd:00 100674505 /home/user/test
10010000-10020000 r--p 00000000 fd:00 100674505 /home/user/test
10020000-10030000 rw-p 00010000 fd:00 100674505 /home/user/test
10180000-101b0000 rw-p 00000000 00:00 0 [heap]
^^^^ this has changed
f7c60000-f7c90000 r-xp 00000000 fd:00 67898089 /usr/lib/ld-2.17.so
f7c90000-f7ca0000 r--p 00020000 fd:00 67898089 /usr/lib/ld-2.17.so
f7ca0000-f7cb0000 rw-p 00030000 fd:00 67898089 /usr/lib/ld-2.17.so
ff860000-ff890000 rw-p 00000000 00:00 0 [stack]
0x10180008
The patch was originally posted in 2012 by Jason Gunthorpe
and apparently ignored:
https://lkml.org/lkml/2012/9/30/138
Lightly run-tested.
Link: http://lkml.kernel.org/r/20161215131950.23054-1-dvlasenk@redhat.com
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-23 02:45:16 +03:00
|
|
|
extern int __must_check vm_brk_flags(unsigned long, unsigned long, unsigned long);
|
2012-04-21 05:57:04 +04:00
|
|
|
extern int vm_munmap(unsigned long, size_t);
|
2016-05-24 02:25:30 +03:00
|
|
|
extern unsigned long __must_check vm_mmap(struct file *, unsigned long,
|
2012-04-21 04:13:58 +04:00
|
|
|
unsigned long, unsigned long,
|
|
|
|
unsigned long, unsigned long);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2012-12-12 04:01:49 +04:00
|
|
|
struct vm_unmapped_area_info {
|
|
|
|
#define VM_UNMAPPED_AREA_TOPDOWN 1
|
|
|
|
unsigned long flags;
|
|
|
|
unsigned long length;
|
|
|
|
unsigned long low_limit;
|
|
|
|
unsigned long high_limit;
|
|
|
|
unsigned long align_mask;
|
|
|
|
unsigned long align_offset;
|
|
|
|
};
|
|
|
|
|
|
|
|
extern unsigned long unmapped_area(struct vm_unmapped_area_info *info);
|
|
|
|
extern unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Search for an unmapped address range.
|
|
|
|
*
|
|
|
|
* We are looking for a range that:
|
|
|
|
* - does not intersect with any VMA;
|
|
|
|
* - is contained within the [low_limit, high_limit) interval;
|
|
|
|
* - is at least the desired size.
|
|
|
|
* - satisfies (begin_addr & align_mask) == (align_offset & align_mask)
|
|
|
|
*/
|
|
|
|
static inline unsigned long
|
|
|
|
vm_unmapped_area(struct vm_unmapped_area_info *info)
|
|
|
|
{
|
2015-04-16 02:14:47 +03:00
|
|
|
if (info->flags & VM_UNMAPPED_AREA_TOPDOWN)
|
2012-12-12 04:01:49 +04:00
|
|
|
return unmapped_area_topdown(info);
|
2015-04-16 02:14:47 +03:00
|
|
|
else
|
|
|
|
return unmapped_area(info);
|
2012-12-12 04:01:49 +04:00
|
|
|
}
|
|
|
|
|
2011-07-26 04:12:23 +04:00
|
|
|
/* truncate.c */
|
2005-04-17 02:20:36 +04:00
|
|
|
extern void truncate_inode_pages(struct address_space *, loff_t);
|
2006-01-06 11:10:36 +03:00
|
|
|
extern void truncate_inode_pages_range(struct address_space *,
|
|
|
|
loff_t lstart, loff_t lend);
|
2014-04-04 01:47:49 +04:00
|
|
|
extern void truncate_inode_pages_final(struct address_space *);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
/* generic vm_area_ops exported for stackable file systems */
|
2017-02-25 01:56:41 +03:00
|
|
|
extern int filemap_fault(struct vm_fault *vmf);
|
2016-12-15 02:06:58 +03:00
|
|
|
extern void filemap_map_pages(struct vm_fault *vmf,
|
2016-07-27 01:25:20 +03:00
|
|
|
pgoff_t start_pgoff, pgoff_t end_pgoff);
|
2017-02-25 01:56:41 +03:00
|
|
|
extern int filemap_page_mkwrite(struct vm_fault *vmf);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
/* mm/page-writeback.c */
|
2017-07-05 22:26:48 +03:00
|
|
|
int __must_check write_one_page(struct page *page);
|
2009-02-19 01:48:18 +03:00
|
|
|
void task_dirty_inc(struct task_struct *tsk);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
/* readahead.c */
|
|
|
|
#define VM_MAX_READAHEAD 128 /* kbytes */
|
|
|
|
#define VM_MIN_READAHEAD 16 /* kbytes (includes current page) */
|
|
|
|
|
|
|
|
int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
|
2005-11-07 11:59:28 +03:00
|
|
|
pgoff_t offset, unsigned long nr_to_read);
|
2007-07-19 12:48:08 +04:00
|
|
|
|
|
|
|
void page_cache_sync_readahead(struct address_space *mapping,
|
|
|
|
struct file_ra_state *ra,
|
|
|
|
struct file *filp,
|
|
|
|
pgoff_t offset,
|
|
|
|
unsigned long size);
|
|
|
|
|
|
|
|
void page_cache_async_readahead(struct address_space *mapping,
|
|
|
|
struct file_ra_state *ra,
|
|
|
|
struct file *filp,
|
|
|
|
struct page *pg,
|
|
|
|
pgoff_t offset,
|
|
|
|
unsigned long size);
|
|
|
|
|
mm: larger stack guard gap, between vmas
Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.
This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.
Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.
One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications. For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).
Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.
Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-19 14:03:24 +03:00
|
|
|
extern unsigned long stack_guard_gap;
|
2011-05-25 04:11:44 +04:00
|
|
|
/* Generic expand stack which grows the stack according to GROWS{UP,DOWN} */
|
2005-10-30 04:16:20 +03:00
|
|
|
extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
|
2011-05-25 04:11:44 +04:00
|
|
|
|
|
|
|
/* CONFIG_STACK_GROWSUP still needs to to grow downwards at some places */
|
|
|
|
extern int expand_downwards(struct vm_area_struct *vma,
|
|
|
|
unsigned long address);
|
2010-08-24 22:44:18 +04:00
|
|
|
#if VM_GROWSUP
|
2005-10-30 04:16:20 +03:00
|
|
|
extern int expand_upwards(struct vm_area_struct *vma, unsigned long address);
|
2010-08-24 22:44:18 +04:00
|
|
|
#else
|
2015-01-07 00:00:05 +03:00
|
|
|
#define expand_upwards(vma, address) (0)
|
2005-11-19 00:16:42 +03:00
|
|
|
#endif
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
/* Look up the first VMA which satisfies addr < vm_end, NULL if none. */
|
|
|
|
extern struct vm_area_struct * find_vma(struct mm_struct * mm, unsigned long addr);
|
|
|
|
extern struct vm_area_struct * find_vma_prev(struct mm_struct * mm, unsigned long addr,
|
|
|
|
struct vm_area_struct **pprev);
|
|
|
|
|
|
|
|
/* Look up the first VMA which intersects the interval start_addr..end_addr-1,
|
|
|
|
NULL if none. Assume start_addr < end_addr. */
|
|
|
|
static inline struct vm_area_struct * find_vma_intersection(struct mm_struct * mm, unsigned long start_addr, unsigned long end_addr)
|
|
|
|
{
|
|
|
|
struct vm_area_struct * vma = find_vma(mm,start_addr);
|
|
|
|
|
|
|
|
if (vma && end_addr <= vma->vm_start)
|
|
|
|
vma = NULL;
|
|
|
|
return vma;
|
|
|
|
}
|
|
|
|
|
mm: larger stack guard gap, between vmas
Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.
This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.
Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.
One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications. For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).
Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.
Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-19 14:03:24 +03:00
|
|
|
static inline unsigned long vm_start_gap(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
unsigned long vm_start = vma->vm_start;
|
|
|
|
|
|
|
|
if (vma->vm_flags & VM_GROWSDOWN) {
|
|
|
|
vm_start -= stack_guard_gap;
|
|
|
|
if (vm_start > vma->vm_start)
|
|
|
|
vm_start = 0;
|
|
|
|
}
|
|
|
|
return vm_start;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned long vm_end_gap(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
unsigned long vm_end = vma->vm_end;
|
|
|
|
|
|
|
|
if (vma->vm_flags & VM_GROWSUP) {
|
|
|
|
vm_end += stack_guard_gap;
|
|
|
|
if (vm_end < vma->vm_end)
|
|
|
|
vm_end = -PAGE_SIZE;
|
|
|
|
}
|
|
|
|
return vm_end;
|
|
|
|
}
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
static inline unsigned long vma_pages(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
return (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
|
|
|
|
}
|
|
|
|
|
2012-01-11 03:11:23 +04:00
|
|
|
/* Look up the first VMA which exactly match the interval vm_start ... vm_end */
|
|
|
|
static inline struct vm_area_struct *find_exact_vma(struct mm_struct *mm,
|
|
|
|
unsigned long vm_start, unsigned long vm_end)
|
|
|
|
{
|
|
|
|
struct vm_area_struct *vma = find_vma(mm, vm_start);
|
|
|
|
|
|
|
|
if (vma && (vma->vm_start != vm_start || vma->vm_end != vm_end))
|
|
|
|
vma = NULL;
|
|
|
|
|
|
|
|
return vma;
|
|
|
|
}
|
|
|
|
|
2010-08-26 19:00:34 +04:00
|
|
|
#ifdef CONFIG_MMU
|
2006-07-27 00:39:49 +04:00
|
|
|
pgprot_t vm_get_page_prot(unsigned long vm_flags);
|
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set. If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.
Here's a simple code snippet to demonstrate the bug:
char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
assert(*m == '\0'); /* new PTE allows write access */
assert(!soft_dirty(x));
*m = 'x'; /* should dirty the page */
assert(soft_dirty(x)); /* fails */
With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared. Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.
As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect. An analogous bug was fixed in mmap by
commit c9d0bf241451 ("mm: uncached vma support with writenotify").
Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:55:46 +04:00
|
|
|
void vma_set_page_prot(struct vm_area_struct *vma);
|
2010-08-26 19:00:34 +04:00
|
|
|
#else
|
|
|
|
static inline pgprot_t vm_get_page_prot(unsigned long vm_flags)
|
|
|
|
{
|
|
|
|
return __pgprot(0);
|
|
|
|
}
|
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set. If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.
Here's a simple code snippet to demonstrate the bug:
char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
assert(*m == '\0'); /* new PTE allows write access */
assert(!soft_dirty(x));
*m = 'x'; /* should dirty the page */
assert(soft_dirty(x)); /* fails */
With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared. Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.
As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect. An analogous bug was fixed in mmap by
commit c9d0bf241451 ("mm: uncached vma support with writenotify").
Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:55:46 +04:00
|
|
|
static inline void vma_set_page_prot(struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
|
|
|
|
}
|
2010-08-26 19:00:34 +04:00
|
|
|
#endif
|
|
|
|
|
2013-12-05 22:38:22 +04:00
|
|
|
#ifdef CONFIG_NUMA_BALANCING
|
2012-10-25 16:16:32 +04:00
|
|
|
unsigned long change_prot_numa(struct vm_area_struct *vma,
|
2012-10-25 16:16:32 +04:00
|
|
|
unsigned long start, unsigned long end);
|
|
|
|
#endif
|
|
|
|
|
2005-10-30 04:16:33 +03:00
|
|
|
struct vm_area_struct *find_extend_vma(struct mm_struct *, unsigned long addr);
|
|
|
|
int remap_pfn_range(struct vm_area_struct *, unsigned long addr,
|
|
|
|
unsigned long pfn, unsigned long size, pgprot_t);
|
2005-11-30 20:35:19 +03:00
|
|
|
int vm_insert_page(struct vm_area_struct *, unsigned long addr, struct page *);
|
2007-02-12 11:51:36 +03:00
|
|
|
int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
unsigned long pfn);
|
2015-12-30 07:12:20 +03:00
|
|
|
int vm_insert_pfn_prot(struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
unsigned long pfn, pgprot_t pgprot);
|
2008-04-28 13:13:01 +04:00
|
|
|
int vm_insert_mixed(struct vm_area_struct *vma, unsigned long addr,
|
2016-01-16 03:56:40 +03:00
|
|
|
pfn_t pfn);
|
2017-09-07 02:18:35 +03:00
|
|
|
int vm_insert_mixed_mkwrite(struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
pfn_t pfn);
|
2013-04-17 00:45:37 +04:00
|
|
|
int vm_iomap_memory(struct vm_area_struct *vma, phys_addr_t start, unsigned long len);
|
|
|
|
|
2005-10-30 04:16:33 +03:00
|
|
|
|
2013-02-23 04:35:56 +04:00
|
|
|
struct page *follow_page_mask(struct vm_area_struct *vma,
|
|
|
|
unsigned long address, unsigned int foll_flags,
|
|
|
|
unsigned int *page_mask);
|
|
|
|
|
|
|
|
static inline struct page *follow_page(struct vm_area_struct *vma,
|
|
|
|
unsigned long address, unsigned int foll_flags)
|
|
|
|
{
|
|
|
|
unsigned int unused_page_mask;
|
|
|
|
return follow_page_mask(vma, address, foll_flags, &unused_page_mask);
|
|
|
|
}
|
|
|
|
|
2005-10-30 04:16:33 +03:00
|
|
|
#define FOLL_WRITE 0x01 /* check pte is writable */
|
|
|
|
#define FOLL_TOUCH 0x02 /* mark page accessed */
|
|
|
|
#define FOLL_GET 0x04 /* do get_page on page */
|
2009-09-22 04:03:26 +04:00
|
|
|
#define FOLL_DUMP 0x08 /* give error on hole if it would be zero */
|
2009-09-22 04:03:31 +04:00
|
|
|
#define FOLL_FORCE 0x10 /* get_user_pages read/write w/o permission */
|
2011-03-23 02:30:51 +03:00
|
|
|
#define FOLL_NOWAIT 0x20 /* if a disk transfer is needed, start the IO
|
|
|
|
* and return without waiting upon it */
|
2015-04-15 01:44:37 +03:00
|
|
|
#define FOLL_POPULATE 0x40 /* fault in page */
|
2011-01-14 02:46:55 +03:00
|
|
|
#define FOLL_SPLIT 0x80 /* don't return transhuge pages, split them */
|
2011-01-30 06:15:48 +03:00
|
|
|
#define FOLL_HWPOISON 0x100 /* check page is hwpoisoned */
|
2012-10-05 23:36:27 +04:00
|
|
|
#define FOLL_NUMA 0x200 /* force NUMA hinting page fault */
|
mm,ksm: FOLL_MIGRATION do migration_entry_wait
In "ksm: remove old stable nodes more thoroughly" I said that I'd never
seen its WARN_ON_ONCE(page_mapped(page)). True at the time of writing,
but it soon appeared once I tried fuller tests on the whole series.
It turned out to be due to the KSM page migration itself: unmerge_and_
remove_all_rmap_items() failed to locate and replace all the KSM pages,
because of that hiatus in page migration when old pte has been replaced
by migration entry, but not yet by new pte. follow_page() finds no page
at that instant, but a KSM page reappears shortly after, without a
fault.
Add FOLL_MIGRATION flag, so follow_page() can do migration_entry_wait()
for KSM's break_cow(). I'd have preferred to avoid another flag, and do
it every time, in case someone else makes the same easy mistake; but did
not find another transgressor (the common get_user_pages() is of course
safe), and cannot be sure that every follow_page() caller is prepared to
sleep - ia64's xencomm_vtop()? Now, THP's wait_split_huge_page() can
already sleep there, since anon_vma locking was changed to mutex, but
maybe that's somehow excluded.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 04:36:07 +04:00
|
|
|
#define FOLL_MIGRATION 0x400 /* wait for page to replace migration entry */
|
2014-09-17 21:51:48 +04:00
|
|
|
#define FOLL_TRIED 0x800 /* a retry, previous pass started an IO */
|
2015-11-06 05:51:36 +03:00
|
|
|
#define FOLL_MLOCK 0x1000 /* lock present pages */
|
2016-02-13 00:01:54 +03:00
|
|
|
#define FOLL_REMOTE 0x2000 /* we are working on non-current tsk/mm */
|
2016-10-13 23:07:36 +03:00
|
|
|
#define FOLL_COW 0x4000 /* internal GUP flag */
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2017-06-03 00:46:46 +03:00
|
|
|
static inline int vm_fault_to_errno(int vm_fault, int foll_flags)
|
|
|
|
{
|
|
|
|
if (vm_fault & VM_FAULT_OOM)
|
|
|
|
return -ENOMEM;
|
|
|
|
if (vm_fault & (VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE))
|
|
|
|
return (foll_flags & FOLL_HWPOISON) ? -EHWPOISON : -EFAULT;
|
|
|
|
if (vm_fault & (VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV))
|
|
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-02-08 15:22:04 +03:00
|
|
|
typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr,
|
2007-05-07 01:48:54 +04:00
|
|
|
void *data);
|
|
|
|
extern int apply_to_page_range(struct mm_struct *mm, unsigned long address,
|
|
|
|
unsigned long size, pte_fn_t fn, void *data);
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2016-03-16 00:56:27 +03:00
|
|
|
#ifdef CONFIG_PAGE_POISONING
|
|
|
|
extern bool page_poisoning_enabled(void);
|
|
|
|
extern void kernel_poison_pages(struct page *page, int numpages, int enable);
|
2016-03-16 00:56:30 +03:00
|
|
|
extern bool page_is_poisoned(struct page *page);
|
2016-03-16 00:56:27 +03:00
|
|
|
#else
|
|
|
|
static inline bool page_poisoning_enabled(void) { return false; }
|
|
|
|
static inline void kernel_poison_pages(struct page *page, int numpages,
|
|
|
|
int enable) { }
|
2016-03-16 00:56:30 +03:00
|
|
|
static inline bool page_is_poisoned(struct page *page) { return false; }
|
2016-03-16 00:56:27 +03:00
|
|
|
#endif
|
|
|
|
|
2008-01-30 15:33:58 +03:00
|
|
|
#ifdef CONFIG_DEBUG_PAGEALLOC
|
2014-12-13 03:55:52 +03:00
|
|
|
extern bool _debug_pagealloc_enabled;
|
|
|
|
extern void __kernel_map_pages(struct page *page, int numpages, int enable);
|
|
|
|
|
|
|
|
static inline bool debug_pagealloc_enabled(void)
|
|
|
|
{
|
|
|
|
return _debug_pagealloc_enabled;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
kernel_map_pages(struct page *page, int numpages, int enable)
|
|
|
|
{
|
|
|
|
if (!debug_pagealloc_enabled())
|
|
|
|
return;
|
|
|
|
|
|
|
|
__kernel_map_pages(page, numpages, enable);
|
|
|
|
}
|
2008-02-20 03:47:44 +03:00
|
|
|
#ifdef CONFIG_HIBERNATION
|
|
|
|
extern bool kernel_page_present(struct page *page);
|
2016-03-16 00:54:21 +03:00
|
|
|
#endif /* CONFIG_HIBERNATION */
|
|
|
|
#else /* CONFIG_DEBUG_PAGEALLOC */
|
2005-04-17 02:20:36 +04:00
|
|
|
static inline void
|
2006-10-11 12:21:30 +04:00
|
|
|
kernel_map_pages(struct page *page, int numpages, int enable) {}
|
2008-02-20 03:47:44 +03:00
|
|
|
#ifdef CONFIG_HIBERNATION
|
|
|
|
static inline bool kernel_page_present(struct page *page) { return true; }
|
2016-03-16 00:54:21 +03:00
|
|
|
#endif /* CONFIG_HIBERNATION */
|
|
|
|
static inline bool debug_pagealloc_enabled(void)
|
|
|
|
{
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_DEBUG_PAGEALLOC */
|
2005-04-17 02:20:36 +04:00
|
|
|
|
arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate area
The core mm code will provide a default gate area based on
FIXADDR_USER_START and FIXADDR_USER_END if
!defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR).
This default is only useful for ia64. arm64, ppc, s390, sh, tile, 64-bit
UML, and x86_32 have their own code just to disable it. arm, 32-bit UML,
and x86_64 have gate areas, but they have their own implementations.
This gets rid of the default and moves the code into ia64.
This should save some code on architectures without a gate area: it's now
possible to inline the gate_area functions in the default case.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Nathan Lynch <nathan_lynch@mentor.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle]
Acked-by: Richard Weinberger <richard@nod.at> [for um]
Acked-by: Will Deacon <will.deacon@arm.com> [for arm64]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Lynch <Nathan_Lynch@mentor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:40 +04:00
|
|
|
#ifdef __HAVE_ARCH_GATE_AREA
|
2011-03-13 22:49:15 +03:00
|
|
|
extern struct vm_area_struct *get_gate_vma(struct mm_struct *mm);
|
arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate area
The core mm code will provide a default gate area based on
FIXADDR_USER_START and FIXADDR_USER_END if
!defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR).
This default is only useful for ia64. arm64, ppc, s390, sh, tile, 64-bit
UML, and x86_32 have their own code just to disable it. arm, 32-bit UML,
and x86_64 have gate areas, but they have their own implementations.
This gets rid of the default and moves the code into ia64.
This should save some code on architectures without a gate area: it's now
possible to inline the gate_area functions in the default case.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Nathan Lynch <nathan_lynch@mentor.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle]
Acked-by: Richard Weinberger <richard@nod.at> [for um]
Acked-by: Will Deacon <will.deacon@arm.com> [for arm64]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Lynch <Nathan_Lynch@mentor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:40 +04:00
|
|
|
extern int in_gate_area_no_mm(unsigned long addr);
|
|
|
|
extern int in_gate_area(struct mm_struct *mm, unsigned long addr);
|
2005-04-17 02:20:36 +04:00
|
|
|
#else
|
arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate area
The core mm code will provide a default gate area based on
FIXADDR_USER_START and FIXADDR_USER_END if
!defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR).
This default is only useful for ia64. arm64, ppc, s390, sh, tile, 64-bit
UML, and x86_32 have their own code just to disable it. arm, 32-bit UML,
and x86_64 have gate areas, but they have their own implementations.
This gets rid of the default and moves the code into ia64.
This should save some code on architectures without a gate area: it's now
possible to inline the gate_area functions in the default case.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Nathan Lynch <nathan_lynch@mentor.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle]
Acked-by: Richard Weinberger <richard@nod.at> [for um]
Acked-by: Will Deacon <will.deacon@arm.com> [for arm64]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Lynch <Nathan_Lynch@mentor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:40 +04:00
|
|
|
static inline struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
static inline int in_gate_area_no_mm(unsigned long addr) { return 0; }
|
|
|
|
static inline int in_gate_area(struct mm_struct *mm, unsigned long addr)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
2005-04-17 02:20:36 +04:00
|
|
|
#endif /* __HAVE_ARCH_GATE_AREA */
|
|
|
|
|
2016-07-29 01:44:43 +03:00
|
|
|
extern bool process_shares_mm(struct task_struct *p, struct mm_struct *mm);
|
|
|
|
|
2013-04-30 02:07:22 +04:00
|
|
|
#ifdef CONFIG_SYSCTL
|
|
|
|
extern int sysctl_drop_caches;
|
2009-09-24 02:57:19 +04:00
|
|
|
int drop_caches_sysctl_handler(struct ctl_table *, int,
|
2006-01-08 12:00:39 +03:00
|
|
|
void __user *, size_t *, loff_t *);
|
2013-04-30 02:07:22 +04:00
|
|
|
#endif
|
|
|
|
|
2015-02-13 01:58:54 +03:00
|
|
|
void drop_slab(void);
|
|
|
|
void drop_slab_node(int nid);
|
2006-01-08 12:00:39 +03:00
|
|
|
|
2006-02-21 05:28:07 +03:00
|
|
|
#ifndef CONFIG_MMU
|
|
|
|
#define randomize_va_space 0
|
|
|
|
#else
|
2006-02-17 01:41:58 +03:00
|
|
|
extern int randomize_va_space;
|
2006-02-21 05:28:07 +03:00
|
|
|
#endif
|
2006-02-17 01:41:58 +03:00
|
|
|
|
2007-07-26 21:41:13 +04:00
|
|
|
const char * arch_vma_name(struct vm_area_struct *vma);
|
2008-01-30 15:33:18 +03:00
|
|
|
void print_vma_addr(char *prefix, unsigned long rip);
|
[PATCH] vdso: randomize the i386 vDSO by moving it into a vma
Move the i386 VDSO down into a vma and thus randomize it.
Besides the security implications, this feature also helps debuggers, which
can COW a vma-backed VDSO just like a normal DSO and can thus do
single-stepping and other debugging features.
It's good for hypervisors (Xen, VMWare) too, which typically live in the same
high-mapped address space as the VDSO, hence whenever the VDSO is used, they
get lots of guest pagefaults and have to fix such guest accesses up - which
slows things down instead of speeding things up (the primary purpose of the
VDSO).
There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support
for older glibcs that still rely on a prelinked high-mapped VDSO. Newer
distributions (using glibc 2.3.3 or later) can turn this option off. Turning
it off is also recommended for security reasons: attackers cannot use the
predictable high-mapped VDSO page as syscall trampoline anymore.
There is a new vdso=[0|1] boot option as well, and a runtime
/proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned
on/off.
(This version of the VDSO-randomization patch also has working ELF
coredumping, the previous patch crashed in the coredumping code.)
This code is a combined work of the exec-shield VDSO randomization
code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell
started this patch and i completed it.
[akpm@osdl.org: cleanups]
[akpm@osdl.org: compile fix]
[akpm@osdl.org: compile fix 2]
[akpm@osdl.org: compile fix 3]
[akpm@osdl.org: revernt MAXMEM change]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Cc: Gerd Hoffmann <kraxel@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 13:53:50 +04:00
|
|
|
|
2010-02-10 12:20:22 +03:00
|
|
|
void sparse_mem_maps_populate_node(struct page **map_map,
|
|
|
|
unsigned long pnum_begin,
|
|
|
|
unsigned long pnum_end,
|
|
|
|
unsigned long map_count,
|
|
|
|
int nodeid);
|
|
|
|
|
2017-12-29 10:53:54 +03:00
|
|
|
struct page *sparse_mem_map_populate(unsigned long pnum, int nid,
|
|
|
|
struct vmem_altmap *altmap);
|
2007-10-16 12:24:14 +04:00
|
|
|
pgd_t *vmemmap_pgd_populate(unsigned long addr, int node);
|
2017-03-09 17:24:07 +03:00
|
|
|
p4d_t *vmemmap_p4d_populate(pgd_t *pgd, unsigned long addr, int node);
|
|
|
|
pud_t *vmemmap_pud_populate(p4d_t *p4d, unsigned long addr, int node);
|
2007-10-16 12:24:14 +04:00
|
|
|
pmd_t *vmemmap_pmd_populate(pud_t *pud, unsigned long addr, int node);
|
|
|
|
pte_t *vmemmap_pte_populate(pmd_t *pmd, unsigned long addr, int node);
|
2007-10-16 12:24:13 +04:00
|
|
|
void *vmemmap_alloc_block(unsigned long size, int node);
|
2016-01-16 03:56:22 +03:00
|
|
|
struct vmem_altmap;
|
2017-12-29 10:53:58 +03:00
|
|
|
void *vmemmap_alloc_block_buf(unsigned long size, int node);
|
|
|
|
void *altmap_alloc_block_buf(unsigned long size, struct vmem_altmap *altmap);
|
2007-10-16 12:24:13 +04:00
|
|
|
void vmemmap_verify(pte_t *, int, unsigned long, unsigned long);
|
2013-04-30 02:07:50 +04:00
|
|
|
int vmemmap_populate_basepages(unsigned long start, unsigned long end,
|
|
|
|
int node);
|
2017-12-29 10:53:54 +03:00
|
|
|
int vmemmap_populate(unsigned long start, unsigned long end, int node,
|
|
|
|
struct vmem_altmap *altmap);
|
2008-04-12 12:19:24 +04:00
|
|
|
void vmemmap_populate_print_last(void);
|
2013-02-23 04:33:08 +04:00
|
|
|
#ifdef CONFIG_MEMORY_HOTPLUG
|
2017-12-29 10:53:56 +03:00
|
|
|
void vmemmap_free(unsigned long start, unsigned long end,
|
|
|
|
struct vmem_altmap *altmap);
|
2013-02-23 04:33:08 +04:00
|
|
|
#endif
|
2013-02-23 04:33:00 +04:00
|
|
|
void register_page_bootmem_memmap(unsigned long section_nr, struct page *map,
|
2017-10-28 04:30:38 +03:00
|
|
|
unsigned long nr_pages);
|
2009-09-16 13:50:15 +04:00
|
|
|
|
2009-12-16 14:19:57 +03:00
|
|
|
enum mf_flags {
|
|
|
|
MF_COUNT_INCREASED = 1 << 0,
|
2011-12-13 21:27:58 +04:00
|
|
|
MF_ACTION_REQUIRED = 1 << 1,
|
2012-07-11 21:20:47 +04:00
|
|
|
MF_MUST_KILL = 1 << 2,
|
2013-07-10 13:27:01 +04:00
|
|
|
MF_SOFT_OFFLINE = 1 << 3,
|
2009-12-16 14:19:57 +03:00
|
|
|
};
|
2017-07-10 02:14:01 +03:00
|
|
|
extern int memory_failure(unsigned long pfn, int flags);
|
|
|
|
extern void memory_failure_queue(unsigned long pfn, int flags);
|
2009-12-16 14:19:58 +03:00
|
|
|
extern int unpoison_memory(unsigned long pfn);
|
2015-06-25 02:56:48 +03:00
|
|
|
extern int get_hwpoison_page(struct page *page);
|
2016-01-16 03:54:07 +03:00
|
|
|
#define put_hwpoison_page(page) put_page(page)
|
2009-09-16 13:50:15 +04:00
|
|
|
extern int sysctl_memory_failure_early_kill;
|
|
|
|
extern int sysctl_memory_failure_recovery;
|
2009-12-16 14:20:00 +03:00
|
|
|
extern void shake_page(struct page *p, int access);
|
2013-02-23 04:34:02 +04:00
|
|
|
extern atomic_long_t num_poisoned_pages;
|
2009-12-16 14:20:00 +03:00
|
|
|
extern int soft_offline_page(struct page *page, int flags);
|
2009-09-16 13:50:15 +04:00
|
|
|
|
2015-06-25 02:57:30 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Error handlers for various types of pages.
|
|
|
|
*/
|
2015-06-25 02:57:33 +03:00
|
|
|
enum mf_result {
|
2015-06-25 02:57:30 +03:00
|
|
|
MF_IGNORED, /* Error: cannot be handled */
|
|
|
|
MF_FAILED, /* Error: handling failed */
|
|
|
|
MF_DELAYED, /* Will be handled later */
|
|
|
|
MF_RECOVERED, /* Successfully recovered */
|
|
|
|
};
|
|
|
|
|
|
|
|
enum mf_action_page_type {
|
|
|
|
MF_MSG_KERNEL,
|
|
|
|
MF_MSG_KERNEL_HIGH_ORDER,
|
|
|
|
MF_MSG_SLAB,
|
|
|
|
MF_MSG_DIFFERENT_COMPOUND,
|
|
|
|
MF_MSG_POISONED_HUGE,
|
|
|
|
MF_MSG_HUGE,
|
|
|
|
MF_MSG_FREE_HUGE,
|
|
|
|
MF_MSG_UNMAP_FAILED,
|
|
|
|
MF_MSG_DIRTY_SWAPCACHE,
|
|
|
|
MF_MSG_CLEAN_SWAPCACHE,
|
|
|
|
MF_MSG_DIRTY_MLOCKED_LRU,
|
|
|
|
MF_MSG_CLEAN_MLOCKED_LRU,
|
|
|
|
MF_MSG_DIRTY_UNEVICTABLE_LRU,
|
|
|
|
MF_MSG_CLEAN_UNEVICTABLE_LRU,
|
|
|
|
MF_MSG_DIRTY_LRU,
|
|
|
|
MF_MSG_CLEAN_LRU,
|
|
|
|
MF_MSG_TRUNCATED_LRU,
|
|
|
|
MF_MSG_BUDDY,
|
|
|
|
MF_MSG_BUDDY_2ND,
|
|
|
|
MF_MSG_UNKNOWN,
|
|
|
|
};
|
|
|
|
|
2011-01-14 02:46:47 +03:00
|
|
|
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLBFS)
|
|
|
|
extern void clear_huge_page(struct page *page,
|
mm: hugetlb: clear target sub-page last when clearing huge page
Huge page helps to reduce TLB miss rate, but it has higher cache
footprint, sometimes this may cause some issue. For example, when
clearing huge page on x86_64 platform, the cache footprint is 2M. But
on a Xeon E5 v3 2699 CPU, there are 18 cores, 36 threads, and only 45M
LLC (last level cache). That is, in average, there are 2.5M LLC for
each core and 1.25M LLC for each thread.
If the cache pressure is heavy when clearing the huge page, and we clear
the huge page from the begin to the end, it is possible that the begin
of huge page is evicted from the cache after we finishing clearing the
end of the huge page. And it is possible for the application to access
the begin of the huge page after clearing the huge page.
To help the above situation, in this patch, when we clear a huge page,
the order to clear sub-pages is changed. In quite some situation, we
can get the address that the application will access after we clear the
huge page, for example, in a page fault handler. Instead of clearing
the huge page from begin to end, we will clear the sub-pages farthest
from the the sub-page to access firstly, and clear the sub-page to
access last. This will make the sub-page to access most cache-hot and
sub-pages around it more cache-hot too. If we cannot know the address
the application will access, the begin of the huge page is assumed to be
the the address the application will access.
With this patch, the throughput increases ~28.3% in vm-scalability
anon-w-seq test case with 72 processes on a 2 socket Xeon E5 v3 2699
system (36 cores, 72 threads). The test case creates 72 processes, each
process mmap a big anonymous memory area and writes to it from the begin
to the end. For each process, other processes could be seen as other
workload which generates heavy cache pressure. At the same time, the
cache miss rate reduced from ~33.4% to ~31.7%, the IPC (instruction per
cycle) increased from 0.56 to 0.74, and the time spent in user space is
reduced ~7.9%
Christopher Lameter suggests to clear bytes inside a sub-page from end
to begin too. But tests show no visible performance difference in the
tests. May because the size of page is small compared with the cache
size.
Thanks Andi Kleen to propose to use address to access to determine the
order of sub-pages to clear.
The hugetlbfs access address could be improved, will do that in another
patch.
[ying.huang@intel.com: improve readability of clear_huge_page()]
Link: http://lkml.kernel.org/r/20170830051842.1397-1-ying.huang@intel.com
Link: http://lkml.kernel.org/r/20170815014618.15842-1-ying.huang@intel.com
Suggested-by: Andi Kleen <andi.kleen@intel.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nadia Yvette Chambers <nyc@holomorphy.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:25:04 +03:00
|
|
|
unsigned long addr_hint,
|
2011-01-14 02:46:47 +03:00
|
|
|
unsigned int pages_per_huge_page);
|
|
|
|
extern void copy_user_huge_page(struct page *dst, struct page *src,
|
|
|
|
unsigned long addr, struct vm_area_struct *vma,
|
|
|
|
unsigned int pages_per_huge_page);
|
2017-02-23 02:42:49 +03:00
|
|
|
extern long copy_huge_page_from_user(struct page *dst_page,
|
|
|
|
const void __user *usr_src,
|
2017-02-23 02:42:58 +03:00
|
|
|
unsigned int pages_per_huge_page,
|
|
|
|
bool allow_pagefault);
|
2011-01-14 02:46:47 +03:00
|
|
|
#endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_HUGETLBFS */
|
|
|
|
|
mm/debug-pagealloc: prepare boottime configurable on/off
Until now, debug-pagealloc needs extra flags in struct page, so we need to
recompile whole source code when we decide to use it. This is really
painful, because it takes some time to recompile and sometimes rebuild is
not possible due to third party module depending on struct page. So, we
can't use this good feature in many cases.
Now, we have the page extension feature that allows us to insert extra
flags to outside of struct page. This gets rid of third party module
issue mentioned above. And, this allows us to determine if we need extra
memory for this page extension in boottime. With these property, we can
avoid using debug-pagealloc in boottime with low computational overhead in
the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our
development process greatly.
This patch is the preparation step to achive above goal. debug-pagealloc
originally uses extra field of struct page, but, after this patch, it will
use field of struct page_ext. Because memory for page_ext is allocated
later than initialization of page allocator in CONFIG_SPARSEMEM, we should
disable debug-pagealloc feature temporarily until initialization of
page_ext. This patch implements this.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 03:55:49 +03:00
|
|
|
extern struct page_ext_operations debug_guardpage_ops;
|
|
|
|
|
2012-01-11 03:07:28 +04:00
|
|
|
#ifdef CONFIG_DEBUG_PAGEALLOC
|
|
|
|
extern unsigned int _debug_guardpage_minorder;
|
mm/debug-pagealloc: prepare boottime configurable on/off
Until now, debug-pagealloc needs extra flags in struct page, so we need to
recompile whole source code when we decide to use it. This is really
painful, because it takes some time to recompile and sometimes rebuild is
not possible due to third party module depending on struct page. So, we
can't use this good feature in many cases.
Now, we have the page extension feature that allows us to insert extra
flags to outside of struct page. This gets rid of third party module
issue mentioned above. And, this allows us to determine if we need extra
memory for this page extension in boottime. With these property, we can
avoid using debug-pagealloc in boottime with low computational overhead in
the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our
development process greatly.
This patch is the preparation step to achive above goal. debug-pagealloc
originally uses extra field of struct page, but, after this patch, it will
use field of struct page_ext. Because memory for page_ext is allocated
later than initialization of page allocator in CONFIG_SPARSEMEM, we should
disable debug-pagealloc feature temporarily until initialization of
page_ext. This patch implements this.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 03:55:49 +03:00
|
|
|
extern bool _debug_guardpage_enabled;
|
2012-01-11 03:07:28 +04:00
|
|
|
|
|
|
|
static inline unsigned int debug_guardpage_minorder(void)
|
|
|
|
{
|
|
|
|
return _debug_guardpage_minorder;
|
|
|
|
}
|
|
|
|
|
mm/debug-pagealloc: prepare boottime configurable on/off
Until now, debug-pagealloc needs extra flags in struct page, so we need to
recompile whole source code when we decide to use it. This is really
painful, because it takes some time to recompile and sometimes rebuild is
not possible due to third party module depending on struct page. So, we
can't use this good feature in many cases.
Now, we have the page extension feature that allows us to insert extra
flags to outside of struct page. This gets rid of third party module
issue mentioned above. And, this allows us to determine if we need extra
memory for this page extension in boottime. With these property, we can
avoid using debug-pagealloc in boottime with low computational overhead in
the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our
development process greatly.
This patch is the preparation step to achive above goal. debug-pagealloc
originally uses extra field of struct page, but, after this patch, it will
use field of struct page_ext. Because memory for page_ext is allocated
later than initialization of page allocator in CONFIG_SPARSEMEM, we should
disable debug-pagealloc feature temporarily until initialization of
page_ext. This patch implements this.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 03:55:49 +03:00
|
|
|
static inline bool debug_guardpage_enabled(void)
|
|
|
|
{
|
|
|
|
return _debug_guardpage_enabled;
|
|
|
|
}
|
|
|
|
|
2012-01-11 03:07:28 +04:00
|
|
|
static inline bool page_is_guard(struct page *page)
|
|
|
|
{
|
mm/debug-pagealloc: prepare boottime configurable on/off
Until now, debug-pagealloc needs extra flags in struct page, so we need to
recompile whole source code when we decide to use it. This is really
painful, because it takes some time to recompile and sometimes rebuild is
not possible due to third party module depending on struct page. So, we
can't use this good feature in many cases.
Now, we have the page extension feature that allows us to insert extra
flags to outside of struct page. This gets rid of third party module
issue mentioned above. And, this allows us to determine if we need extra
memory for this page extension in boottime. With these property, we can
avoid using debug-pagealloc in boottime with low computational overhead in
the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our
development process greatly.
This patch is the preparation step to achive above goal. debug-pagealloc
originally uses extra field of struct page, but, after this patch, it will
use field of struct page_ext. Because memory for page_ext is allocated
later than initialization of page allocator in CONFIG_SPARSEMEM, we should
disable debug-pagealloc feature temporarily until initialization of
page_ext. This patch implements this.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 03:55:49 +03:00
|
|
|
struct page_ext *page_ext;
|
|
|
|
|
|
|
|
if (!debug_guardpage_enabled())
|
|
|
|
return false;
|
|
|
|
|
|
|
|
page_ext = lookup_page_ext(page);
|
2016-05-21 02:58:59 +03:00
|
|
|
if (unlikely(!page_ext))
|
|
|
|
return false;
|
|
|
|
|
mm/debug-pagealloc: prepare boottime configurable on/off
Until now, debug-pagealloc needs extra flags in struct page, so we need to
recompile whole source code when we decide to use it. This is really
painful, because it takes some time to recompile and sometimes rebuild is
not possible due to third party module depending on struct page. So, we
can't use this good feature in many cases.
Now, we have the page extension feature that allows us to insert extra
flags to outside of struct page. This gets rid of third party module
issue mentioned above. And, this allows us to determine if we need extra
memory for this page extension in boottime. With these property, we can
avoid using debug-pagealloc in boottime with low computational overhead in
the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our
development process greatly.
This patch is the preparation step to achive above goal. debug-pagealloc
originally uses extra field of struct page, but, after this patch, it will
use field of struct page_ext. Because memory for page_ext is allocated
later than initialization of page allocator in CONFIG_SPARSEMEM, we should
disable debug-pagealloc feature temporarily until initialization of
page_ext. This patch implements this.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 03:55:49 +03:00
|
|
|
return test_bit(PAGE_EXT_DEBUG_GUARD, &page_ext->flags);
|
2012-01-11 03:07:28 +04:00
|
|
|
}
|
|
|
|
#else
|
|
|
|
static inline unsigned int debug_guardpage_minorder(void) { return 0; }
|
mm/debug-pagealloc: prepare boottime configurable on/off
Until now, debug-pagealloc needs extra flags in struct page, so we need to
recompile whole source code when we decide to use it. This is really
painful, because it takes some time to recompile and sometimes rebuild is
not possible due to third party module depending on struct page. So, we
can't use this good feature in many cases.
Now, we have the page extension feature that allows us to insert extra
flags to outside of struct page. This gets rid of third party module
issue mentioned above. And, this allows us to determine if we need extra
memory for this page extension in boottime. With these property, we can
avoid using debug-pagealloc in boottime with low computational overhead in
the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our
development process greatly.
This patch is the preparation step to achive above goal. debug-pagealloc
originally uses extra field of struct page, but, after this patch, it will
use field of struct page_ext. Because memory for page_ext is allocated
later than initialization of page allocator in CONFIG_SPARSEMEM, we should
disable debug-pagealloc feature temporarily until initialization of
page_ext. This patch implements this.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 03:55:49 +03:00
|
|
|
static inline bool debug_guardpage_enabled(void) { return false; }
|
2012-01-11 03:07:28 +04:00
|
|
|
static inline bool page_is_guard(struct page *page) { return false; }
|
|
|
|
#endif /* CONFIG_DEBUG_PAGEALLOC */
|
|
|
|
|
2013-04-30 02:08:01 +04:00
|
|
|
#if MAX_NUMNODES > 1
|
|
|
|
void __init setup_nr_node_ids(void);
|
|
|
|
#else
|
|
|
|
static inline void setup_nr_node_ids(void) {}
|
|
|
|
#endif
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* _LINUX_MM_H */
|