microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/arm/common/mcpm_entry.c

457 строки
13 KiB
C
Исходник Обычный вид История

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04 11:11:33 +03:00
// SPDX-License-Identifier: GPL-2.0-only
ARM: multi-cluster PM: secondary kernel entry code CPUs in cluster based systems, such as big.LITTLE, have special needs when entering the kernel due to a hotplug event, or when resuming from a deep sleep mode. This is vectorized so multiple CPUs can enter the kernel in parallel without serialization. The mcpm prefix stands for "multi cluster power management", however this is usable on single cluster systems as well. Only the basic structure is introduced here. This will be extended with later patches. In order not to complexify things more than they currently have to, the planned work to make runtime adjusted MPIDR based indexing and dynamic memory allocation for cluster states is postponed to a later cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions should be sufficient for those systems expected to be available in the near future. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-04-12 10:45:22 +04:00
/*
* arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM
*
* Created by: Nicolas Pitre, March 2012
* Copyright: (C) 2012-2013 Linaro Limited
*/
ARM: mcpm, perf/arm-cci: export mcpm_is_available Now that the ARM CCI PMU driver can be built as a loadable module, we get a link failure when MCPM is enabled: ERROR: "mcpm_is_available" [drivers/perf/arm-cci.ko] undefined! The simplest fix is to export that helper function. Fixes: 8b0c93c20ef7 ("perf/arm-cci: Allow building as a module") Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-28 18:44:36 +03:00
#include <linux/export.h>
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irqflags.h>
ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback The kernel already has the responsibility to handle resources such as the CCI when hotplugging CPUs, during the booting of secondary CPUs, and when resuming from suspend/idle. It would be more coherent and less confusing if the CCI for the boot CPU (or cluster) was also initialized by the kernel rather than expecting the firmware/bootloader to do it and only in that case. After all, the kernel has all the necessary code already and the bootloader shouldn't have to care at all. The CCI may be turned on only when the cache is off. Leveraging the CPU suspend code to loop back through the low-level MCPM entry point is all that is needed to properly turn on the CCI from the kernel by using the same code as during secondary boot. Let's provide a generic MCPM loopback function that can be invoked by backend initialization code to set things (CCI or similar) on the boot CPU just as it is done for the other CPUs. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-24 21:32:51 +04:00
#include <linux/cpu_pm.h>
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
ARM: multi-cluster PM: secondary kernel entry code CPUs in cluster based systems, such as big.LITTLE, have special needs when entering the kernel due to a hotplug event, or when resuming from a deep sleep mode. This is vectorized so multiple CPUs can enter the kernel in parallel without serialization. The mcpm prefix stands for "multi cluster power management", however this is usable on single cluster systems as well. Only the basic structure is introduced here. This will be extended with later patches. In order not to complexify things more than they currently have to, the planned work to make runtime adjusted MPIDR based indexing and dynamic memory allocation for cluster states is postponed to a later cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions should be sufficient for those systems expected to be available in the near future. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-04-12 10:45:22 +04:00
#include <asm/mcpm.h>
#include <asm/cacheflush.h>
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
#include <asm/idmap.h>
ARM: mcpm: introduce helpers for platform coherency exit/setup This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-17 17:25:42 +04:00
#include <asm/cputype.h>
ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback The kernel already has the responsibility to handle resources such as the CCI when hotplugging CPUs, during the booting of secondary CPUs, and when resuming from suspend/idle. It would be more coherent and less confusing if the CCI for the boot CPU (or cluster) was also initialized by the kernel rather than expecting the firmware/bootloader to do it and only in that case. After all, the kernel has all the necessary code already and the bootloader shouldn't have to care at all. The CCI may be turned on only when the cache is off. Leveraging the CPU suspend code to loop back through the low-level MCPM entry point is all that is needed to properly turn on the CCI from the kernel by using the same code as during secondary boot. Let's provide a generic MCPM loopback function that can be invoked by backend initialization code to set things (CCI or similar) on the boot CPU just as it is done for the other CPUs. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-24 21:32:51 +04:00
#include <asm/suspend.h>
ARM: multi-cluster PM: secondary kernel entry code CPUs in cluster based systems, such as big.LITTLE, have special needs when entering the kernel due to a hotplug event, or when resuming from a deep sleep mode. This is vectorized so multiple CPUs can enter the kernel in parallel without serialization. The mcpm prefix stands for "multi cluster power management", however this is usable on single cluster systems as well. Only the basic structure is introduced here. This will be extended with later patches. In order not to complexify things more than they currently have to, the planned work to make runtime adjusted MPIDR based indexing and dynamic memory allocation for cluster states is postponed to a later cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions should be sufficient for those systems expected to be available in the near future. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-04-12 10:45:22 +04:00
ARM: MCPM: add references to the available documentation in the code Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <Dave.Martin@arm.com>
2015-04-28 21:51:36 +03:00
/*
* The public API for this code is documented in arch/arm/include/asm/mcpm.h.
* For a comprehensive description of the main algorithm used here, please
docs: arm: convert docs to ReST and rename to *.rst Converts ARM the text files to ReST, preparing them to be an architecture book. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by Corentin Labbe <clabbe.montjoie@gmail.com> # For sun4i-ss
2019-04-14 21:51:10 +03:00
* see Documentation/arm/cluster-pm-race-avoidance.rst.
ARM: MCPM: add references to the available documentation in the code Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <Dave.Martin@arm.com>
2015-04-28 21:51:36 +03:00
*/
ARM: MCPM: make internal helpers private to the core code This concerns the following helpers: __mcpm_cpu_going_down() __mcpm_cpu_down() __mcpm_outbound_enter_critical() __mcpm_outbound_leave_critical() __mcpm_cluster_state() They are and should only be used by the core code now. Therefore their declarations are removed from mcpm.h and their definitions are made static, hence the need to move them before their users which accounts for the bulk of this patch. This left the mcpm_sync_struct definition at an odd location, therefore it is moved as well with some comment clarifications. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <Dave.Martin@arm.com>
2015-04-28 21:11:07 +03:00
struct sync_struct mcpm_sync;
/*
* __mcpm_cpu_going_down: Indicates that the cpu is being torn down.
* This must be called at the point of committing to teardown of a CPU.
* The CPU cache (SCTRL.C bit) is expected to still be active.
*/
static void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster)
{
mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN;
sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
}
/*
* __mcpm_cpu_down: Indicates that cpu teardown is complete and that the
* cluster can be torn down without disrupting this CPU.
* To avoid deadlocks, this must be called before a CPU is powered down.
* The CPU cache (SCTRL.C bit) is expected to be off.
* However L2 cache might or might not be active.
*/
static void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster)
{
dmb();
mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN;
sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
sev();
}
/*
* __mcpm_outbound_leave_critical: Leave the cluster teardown critical section.
* @state: the final state of the cluster:
* CLUSTER_UP: no destructive teardown was done and the cluster has been
* restored to the previous state (CPU cache still active); or
* CLUSTER_DOWN: the cluster has been torn-down, ready for power-off
* (CPU cache disabled, L2 cache either enabled or disabled).
*/
static void __mcpm_outbound_leave_critical(unsigned int cluster, int state)
{
dmb();
mcpm_sync.clusters[cluster].cluster = state;
sync_cache_w(&mcpm_sync.clusters[cluster].cluster);
sev();
}
/*
* __mcpm_outbound_enter_critical: Enter the cluster teardown critical section.
* This function should be called by the last man, after local CPU teardown
* is complete. CPU cache expected to be active.
*
* Returns:
* false: the critical section was not entered because an inbound CPU was
* observed, or the cluster is already being set up;
* true: the critical section was entered: it is now safe to tear down the
* cluster.
*/
static bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster)
{
unsigned int i;
struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster];
/* Warn inbound CPUs that the cluster is being torn down: */
c->cluster = CLUSTER_GOING_DOWN;
sync_cache_w(&c->cluster);
/* Back out if the inbound cluster is already in the critical region: */
sync_cache_r(&c->inbound);
if (c->inbound == INBOUND_COMING_UP)
goto abort;
/*
* Wait for all CPUs to get out of the GOING_DOWN state, so that local
* teardown is complete on each CPU before tearing down the cluster.
*
* If any CPU has been woken up again from the DOWN state, then we
* shouldn't be taking the cluster down at all: abort in that case.
*/
sync_cache_r(&c->cpus);
for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) {
int cpustate;
if (i == cpu)
continue;
while (1) {
cpustate = c->cpus[i].cpu;
if (cpustate != CPU_GOING_DOWN)
break;
wfe();
sync_cache_r(&c->cpus[i].cpu);
}
switch (cpustate) {
case CPU_DOWN:
continue;
default:
goto abort;
}
}
return true;
abort:
__mcpm_outbound_leave_critical(cluster, CLUSTER_UP);
return false;
}
static int __mcpm_cluster_state(unsigned int cluster)
{
sync_cache_r(&mcpm_sync.clusters[cluster].cluster);
return mcpm_sync.clusters[cluster].cluster;
}
ARM: multi-cluster PM: secondary kernel entry code CPUs in cluster based systems, such as big.LITTLE, have special needs when entering the kernel due to a hotplug event, or when resuming from a deep sleep mode. This is vectorized so multiple CPUs can enter the kernel in parallel without serialization. The mcpm prefix stands for "multi cluster power management", however this is usable on single cluster systems as well. Only the basic structure is introduced here. This will be extended with later patches. In order not to complexify things more than they currently have to, the planned work to make runtime adjusted MPIDR based indexing and dynamic memory allocation for cluster states is postponed to a later cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions should be sufficient for those systems expected to be available in the near future. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-04-12 10:45:22 +04:00
extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER];
void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr)
{
ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-01-15 05:59:29 +03:00
unsigned long val = ptr ? __pa_symbol(ptr) : 0;
ARM: multi-cluster PM: secondary kernel entry code CPUs in cluster based systems, such as big.LITTLE, have special needs when entering the kernel due to a hotplug event, or when resuming from a deep sleep mode. This is vectorized so multiple CPUs can enter the kernel in parallel without serialization. The mcpm prefix stands for "multi cluster power management", however this is usable on single cluster systems as well. Only the basic structure is introduced here. This will be extended with later patches. In order not to complexify things more than they currently have to, the planned work to make runtime adjusted MPIDR based indexing and dynamic memory allocation for cluster states is postponed to a later cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions should be sufficient for those systems expected to be available in the near future. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-04-12 10:45:22 +04:00
mcpm_entry_vectors[cluster][cpu] = val;
sync_cache_w(&mcpm_entry_vectors[cluster][cpu]);
}
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
ARM: mcpm: add a simple poke mechanism to the early entry code This allows to poke a predetermined value into a specific address upon entering the early boot code in bL_head.S. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2012-11-28 08:11:20 +04:00
extern unsigned long mcpm_entry_early_pokes[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER][2];
void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
unsigned long poke_phys_addr, unsigned long poke_val)
{
unsigned long *poke = &mcpm_entry_early_pokes[cluster][cpu][0];
poke[0] = poke_phys_addr;
poke[1] = poke_val;
ARM: 7918/1: clean up cache handling in core code We have a handy macro to replace open coded __cpuc_flush_dcache_area(() and outer_clean_range() sequences. Let's use it. No functional change. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-12-09 19:10:18 +04:00
__sync_cache_range_w(poke, 2 * sizeof(*poke));
ARM: mcpm: add a simple poke mechanism to the early entry code This allows to poke a predetermined value into a specific address upon entering the early boot code in bL_head.S. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2012-11-28 08:11:20 +04:00
}
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
static const struct mcpm_platform_ops *platform_ops;
int __init mcpm_platform_register(const struct mcpm_platform_ops *ops)
{
if (platform_ops)
return -EBUSY;
platform_ops = ops;
return 0;
}
ARM: 8032/1: bL_switcher: fix validation check before its activation The switcher should not depend on MAX_CLUSTER to determine ifit should be activated or not. In a multiplatform kernel binary it is possible to have dual-cluster and quad-cluster platforms configured in. In that case MAX_CLUSTER which is a build time limit should be 4 and that shouldn't prevent the switcher from working if the kernel is booted on a b.L dual-cluster system. In bL_switcher_halve_cpus() we already have a runtime validation check to make sure we're dealing with only two clusters, so booting on a quad cluster system will be caught and switcher activation aborted. However, the b.L switcher must ensure the MCPM layer is initialized on the booted hardware before doing anything. The mcpm_is_available() function is added to that effect. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Abhilash Kesavan <kesavan.abhilash@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-22 03:25:35 +04:00
bool mcpm_is_available(void)
{
return (platform_ops) ? true : false;
}
ARM: mcpm, perf/arm-cci: export mcpm_is_available Now that the ARM CCI PMU driver can be built as a loadable module, we get a link failure when MCPM is enabled: ERROR: "mcpm_is_available" [drivers/perf/arm-cci.ko] undefined! The simplest fix is to export that helper function. Fixes: 8b0c93c20ef7 ("perf/arm-cci: Allow building as a module") Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-28 18:44:36 +03:00
EXPORT_SYMBOL_GPL(mcpm_is_available);
ARM: 8032/1: bL_switcher: fix validation check before its activation The switcher should not depend on MAX_CLUSTER to determine ifit should be activated or not. In a multiplatform kernel binary it is possible to have dual-cluster and quad-cluster platforms configured in. In that case MAX_CLUSTER which is a build time limit should be 4 and that shouldn't prevent the switcher from working if the kernel is booted on a b.L dual-cluster system. In bL_switcher_halve_cpus() we already have a runtime validation check to make sure we're dealing with only two clusters, so booting on a quad cluster system will be caught and switcher activation aborted. However, the b.L switcher must ensure the MCPM layer is initialized on the booted hardware before doing anything. The mcpm_is_available() function is added to that effect. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Abhilash Kesavan <kesavan.abhilash@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-22 03:25:35 +04:00
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
/*
* We can't use regular spinlocks. In the switcher case, it is possible
* for an outbound CPU to call power_down() after its inbound counterpart
* is already live using the same logical CPU number which trips lockdep
* debugging.
*/
static arch_spinlock_t mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
static int mcpm_cpu_use_count[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER];
static inline bool mcpm_cluster_unused(unsigned int cluster)
{
int i, cnt;
for (i = 0, cnt = 0; i < MAX_CPUS_PER_CLUSTER; i++)
cnt |= mcpm_cpu_use_count[cluster][i];
return !cnt;
}
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
{
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
bool cpu_is_down, cluster_is_down;
int ret = 0;
ARM: MCPM: remove backward compatibility code Now that no one uses the old callbacks anymore, let's remove them and associated support code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <Dave.Martin@arm.com>
2015-04-28 20:44:00 +03:00
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
if (!platform_ops)
return -EUNATCH; /* try not to shadow power_up errors */
might_sleep();
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
/*
* Since this is called with IRQs enabled, and no arch_spin_lock_irq
* variant exists, we need to disable IRQs manually here.
*/
local_irq_disable();
arch_spin_lock(&mcpm_lock);
cpu_is_down = !mcpm_cpu_use_count[cluster][cpu];
cluster_is_down = mcpm_cluster_unused(cluster);
mcpm_cpu_use_count[cluster][cpu]++;
/*
* The only possible values are:
* 0 = CPU down
* 1 = CPU (still) up
* 2 = CPU requested to be up before it had a chance
* to actually make itself down.
* Any other value is a bug.
*/
BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 1 &&
mcpm_cpu_use_count[cluster][cpu] != 2);
if (cluster_is_down)
ret = platform_ops->cluster_powerup(cluster);
if (cpu_is_down && !ret)
ret = platform_ops->cpu_powerup(cpu, cluster);
arch_spin_unlock(&mcpm_lock);
local_irq_enable();
return ret;
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
}
ARM: 8675/1: MCPM: ensure not to enter __hyp_soft_restart from loopback and cpu_power_down Commit 9da5ac236de6 ("ARM: soft-reboot into same mode that we entered the kernel") added support to enter the new kernel in the same processor mode as the previous one when we soft-reboot from one kernel into another by pass a flag to cpu_reset() so it knows what to do exactly. However it missed to make similar changes in MCPM code. Due to the missing flag, the CPUs enter HYP mode which is not supported with MCPM. MCPM works only in secure mode as it manages CCI. This patch aligns the cpu_reset call in MCPM with other changes in the above mentioned commit by making phys_reset_t to follow the prototype of cpu_reset(). Fixes: 9da5ac236de6 ("ARM: soft-reboot into same mode that we entered the kernel") Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-05-18 19:09:59 +03:00
typedef typeof(cpu_reset) phys_reset_t;
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
void mcpm_cpu_power_down(void)
{
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
unsigned int mpidr, cpu, cluster;
bool cpu_going_down, last_man;
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
phys_reset_t phys_reset;
ARM: MCPM: remove backward compatibility code Now that no one uses the old callbacks anymore, let's remove them and associated support code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <Dave.Martin@arm.com>
2015-04-28 20:44:00 +03:00
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
if (WARN_ON_ONCE(!platform_ops))
return;
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
BUG_ON(!irqs_disabled());
setup_mm_for_reboot();
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
__mcpm_cpu_going_down(cpu, cluster);
arch_spin_lock(&mcpm_lock);
BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
mcpm_cpu_use_count[cluster][cpu]--;
BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 0 &&
mcpm_cpu_use_count[cluster][cpu] != 1);
cpu_going_down = !mcpm_cpu_use_count[cluster][cpu];
last_man = mcpm_cluster_unused(cluster);
if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
platform_ops->cpu_powerdown_prepare(cpu, cluster);
platform_ops->cluster_powerdown_prepare(cluster);
arch_spin_unlock(&mcpm_lock);
platform_ops->cluster_cache_disable();
__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
} else {
if (cpu_going_down)
platform_ops->cpu_powerdown_prepare(cpu, cluster);
arch_spin_unlock(&mcpm_lock);
/*
* If cpu_going_down is false here, that means a power_up
* request raced ahead of us. Even if we do not want to
* shut this CPU down, the caller still expects execution
* to return through the system resume entry path, like
* when the WFI is aborted due to a new IRQ or the like..
* So let's continue with cache cleaning in all cases.
*/
platform_ops->cpu_cache_disable();
}
__mcpm_cpu_down(cpu, cluster);
/* Now we are prepared for power-down, do it: */
if (cpu_going_down)
wfi();
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
/*
* It is possible for a power_up request to happen concurrently
* with a power_down request for the same CPU. In this case the
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
* CPU might not be able to actually enter a powered down state
* with the WFI instruction if the power_up request has removed
* the required reset condition. We must perform a re-entry in
* the kernel as if the power_up method just had deasserted reset
* on the CPU.
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
*/
ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-01-15 05:59:29 +03:00
phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
ARM: 8675/1: MCPM: ensure not to enter __hyp_soft_restart from loopback and cpu_power_down Commit 9da5ac236de6 ("ARM: soft-reboot into same mode that we entered the kernel") added support to enter the new kernel in the same processor mode as the previous one when we soft-reboot from one kernel into another by pass a flag to cpu_reset() so it knows what to do exactly. However it missed to make similar changes in MCPM code. Due to the missing flag, the CPUs enter HYP mode which is not supported with MCPM. MCPM works only in secure mode as it manages CCI. This patch aligns the cpu_reset call in MCPM with other changes in the above mentioned commit by making phys_reset_t to follow the prototype of cpu_reset(). Fixes: 9da5ac236de6 ("ARM: soft-reboot into same mode that we entered the kernel") Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-05-18 19:09:59 +03:00
phys_reset(__pa_symbol(mcpm_entry_point), false);
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
/* should never get here */
BUG();
}
ARM: 8029/1: mcpm: Rename the power_down_finish() functions to be less confusing The name "power_down_finish" seems to be causing some confusion, because it suggests that this function is responsible for taking some action to cause the specified CPU to complete its power down. This patch renames the affected functions to "wait_for_powerdown" and similar, since this function's intended purpose is just to wait for the hardware to finish a powerdown initiated by a previous cpu_power_down. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-17 19:58:39 +04:00
int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster)
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown CPU hotplug and kexec rely on smp_ops.cpu_kill(), which is supposed to wait for the CPU to park or power down, and perform the last rites (such as disabling clocks etc., where the platform doesn't do this automatically). kexec in particular is unsafe without performing this synchronisation to park secondaries. Without it, the secondaries might not be parked when kexec trashes the kernel. There is no generic way to do this synchronisation, so a new mcpm platform_ops method power_down_finish() is added by this patch. The new method is mandatory. A platform which provides no way to detect when CPUs are parked is likely broken. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-01 22:58:17 +04:00
{
int ret;
ARM: 8029/1: mcpm: Rename the power_down_finish() functions to be less confusing The name "power_down_finish" seems to be causing some confusion, because it suggests that this function is responsible for taking some action to cause the specified CPU to complete its power down. This patch renames the affected functions to "wait_for_powerdown" and similar, since this function's intended purpose is just to wait for the hardware to finish a powerdown initiated by a previous cpu_power_down. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-17 19:58:39 +04:00
if (WARN_ON_ONCE(!platform_ops || !platform_ops->wait_for_powerdown))
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown CPU hotplug and kexec rely on smp_ops.cpu_kill(), which is supposed to wait for the CPU to park or power down, and perform the last rites (such as disabling clocks etc., where the platform doesn't do this automatically). kexec in particular is unsafe without performing this synchronisation to park secondaries. Without it, the secondaries might not be parked when kexec trashes the kernel. There is no generic way to do this synchronisation, so a new mcpm platform_ops method power_down_finish() is added by this patch. The new method is mandatory. A platform which provides no way to detect when CPUs are parked is likely broken. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-01 22:58:17 +04:00
return -EUNATCH;
ARM: 8029/1: mcpm: Rename the power_down_finish() functions to be less confusing The name "power_down_finish" seems to be causing some confusion, because it suggests that this function is responsible for taking some action to cause the specified CPU to complete its power down. This patch renames the affected functions to "wait_for_powerdown" and similar, since this function's intended purpose is just to wait for the hardware to finish a powerdown initiated by a previous cpu_power_down. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-17 19:58:39 +04:00
ret = platform_ops->wait_for_powerdown(cpu, cluster);
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown CPU hotplug and kexec rely on smp_ops.cpu_kill(), which is supposed to wait for the CPU to park or power down, and perform the last rites (such as disabling clocks etc., where the platform doesn't do this automatically). kexec in particular is unsafe without performing this synchronisation to park secondaries. Without it, the secondaries might not be parked when kexec trashes the kernel. There is no generic way to do this synchronisation, so a new mcpm platform_ops method power_down_finish() is added by this patch. The new method is mandatory. A platform which provides no way to detect when CPUs are parked is likely broken. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-01 22:58:17 +04:00
if (ret)
pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",
__func__, cpu, cluster, ret);
return ret;
}
ARM: MCPM: remove residency argument from mcpm_cpu_suspend() This is currently unused. If a suspend must be limited to CPU level only by preventing the last man from triggering a cluster level suspend then this should be determined according to many other criteria the MCPM layer is currently not aware of. It is unlikely that mcpm_cpu_suspend() would be the proper conduit for that information anyway. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Dave Martin <Dave.Martin@arm.com>
2015-04-28 22:51:19 +03:00
void mcpm_cpu_suspend(void)
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
{
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
if (WARN_ON_ONCE(!platform_ops))
ARM: 7842/1: MCPM: don't explode if invoked without being initialized first Currently mcpm_cpu_power_down() and mcpm_cpu_suspend() trigger BUG() if mcpm_platform_register() is not called beforehand. This may occur for many reasons such as some incomplete device tree passed to the kernel or the like. Let's be nicer to users and avoid killing the kernel if that happens by logging a warning and returning to the caller. The mcpm_cpu_suspend() user is already set to deal with this situation, and so is cpu_die() invoking mcpm_cpu_die(). The problematic case would have been the B.L switcher's usage of mcpm_cpu_power_down(), however it has to call mcpm_cpu_power_up() first which is already set to catch an error resulting from a missing mcpm_platform_register() call. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-26 02:26:24 +04:00
return;
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
/* Some platforms might have to enable special resume modes, etc. */
if (platform_ops->cpu_suspend_prepare) {
unsigned int mpidr = read_cpuid_mpidr();
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
arch_spin_lock(&mcpm_lock);
platform_ops->cpu_suspend_prepare(cpu, cluster);
arch_spin_unlock(&mcpm_lock);
}
mcpm_cpu_power_down();
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
}
int mcpm_cpu_powered_up(void)
{
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
unsigned int mpidr, cpu, cluster;
bool cpu_was_down, first_man;
unsigned long flags;
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
if (!platform_ops)
return -EUNATCH;
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
mpidr = read_cpuid_mpidr();
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
local_irq_save(flags);
arch_spin_lock(&mcpm_lock);
cpu_was_down = !mcpm_cpu_use_count[cluster][cpu];
first_man = mcpm_cluster_unused(cluster);
if (first_man && platform_ops->cluster_is_up)
platform_ops->cluster_is_up(cluster);
if (cpu_was_down)
mcpm_cpu_use_count[cluster][cpu] = 1;
if (platform_ops->cpu_is_up)
platform_ops->cpu_is_up(cpu, cluster);
arch_spin_unlock(&mcpm_lock);
local_irq_restore(flags);
ARM: mcpm: introduce the CPU/cluster power API This is the basic API used to handle the powering up/down of individual CPUs in a (multi-)cluster system. The platform specific backend implementation has the responsibility to also handle the cluster level power as well when the first/last CPU in a cluster is brought up/down. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-09-21 00:05:37 +04:00
return 0;
}
ARM: mcpm: introduce helpers for platform coherency exit/setup This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-17 17:25:42 +04:00
ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback The kernel already has the responsibility to handle resources such as the CCI when hotplugging CPUs, during the booting of secondary CPUs, and when resuming from suspend/idle. It would be more coherent and less confusing if the CCI for the boot CPU (or cluster) was also initialized by the kernel rather than expecting the firmware/bootloader to do it and only in that case. After all, the kernel has all the necessary code already and the bootloader shouldn't have to care at all. The CCI may be turned on only when the cache is off. Leveraging the CPU suspend code to loop back through the low-level MCPM entry point is all that is needed to properly turn on the CCI from the kernel by using the same code as during secondary boot. Let's provide a generic MCPM loopback function that can be invoked by backend initialization code to set things (CCI or similar) on the boot CPU just as it is done for the other CPUs. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-24 21:32:51 +04:00
#ifdef CONFIG_ARM_CPU_SUSPEND
static int __init nocache_trampoline(unsigned long _arg)
{
void (*cache_disable)(void) = (void *)_arg;
unsigned int mpidr = read_cpuid_mpidr();
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
phys_reset_t phys_reset;
ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to perform low-level platform initialization. This results in a try to install HYP stubs for the second time for each CPU and results in false HYP/SVC mode mismatch detection. The HYP stubs are already installed at the beginning of the kernel initialization on the boot CPU (head.S) or in the secondary_startup() for other CPUs. To fix this issue MCPM code should use a cpu_resume() routine without HYP stubs installation. This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid XU3/XU4/HC1 boards. Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-02-18 11:31:41 +03:00
mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback The kernel already has the responsibility to handle resources such as the CCI when hotplugging CPUs, during the booting of secondary CPUs, and when resuming from suspend/idle. It would be more coherent and less confusing if the CCI for the boot CPU (or cluster) was also initialized by the kernel rather than expecting the firmware/bootloader to do it and only in that case. After all, the kernel has all the necessary code already and the bootloader shouldn't have to care at all. The CCI may be turned on only when the cache is off. Leveraging the CPU suspend code to loop back through the low-level MCPM entry point is all that is needed to properly turn on the CCI from the kernel by using the same code as during secondary boot. Let's provide a generic MCPM loopback function that can be invoked by backend initialization code to set things (CCI or similar) on the boot CPU just as it is done for the other CPUs. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-24 21:32:51 +04:00
setup_mm_for_reboot();
__mcpm_cpu_going_down(cpu, cluster);
BUG_ON(!__mcpm_outbound_enter_critical(cpu, cluster));
cache_disable();
__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
__mcpm_cpu_down(cpu, cluster);
ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-01-15 05:59:29 +03:00
phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
ARM: 8675/1: MCPM: ensure not to enter __hyp_soft_restart from loopback and cpu_power_down Commit 9da5ac236de6 ("ARM: soft-reboot into same mode that we entered the kernel") added support to enter the new kernel in the same processor mode as the previous one when we soft-reboot from one kernel into another by pass a flag to cpu_reset() so it knows what to do exactly. However it missed to make similar changes in MCPM code. Due to the missing flag, the CPUs enter HYP mode which is not supported with MCPM. MCPM works only in secure mode as it manages CCI. This patch aligns the cpu_reset call in MCPM with other changes in the above mentioned commit by making phys_reset_t to follow the prototype of cpu_reset(). Fixes: 9da5ac236de6 ("ARM: soft-reboot into same mode that we entered the kernel") Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-05-18 19:09:59 +03:00
phys_reset(__pa_symbol(mcpm_entry_point), false);
ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback The kernel already has the responsibility to handle resources such as the CCI when hotplugging CPUs, during the booting of secondary CPUs, and when resuming from suspend/idle. It would be more coherent and less confusing if the CCI for the boot CPU (or cluster) was also initialized by the kernel rather than expecting the firmware/bootloader to do it and only in that case. After all, the kernel has all the necessary code already and the bootloader shouldn't have to care at all. The CCI may be turned on only when the cache is off. Leveraging the CPU suspend code to loop back through the low-level MCPM entry point is all that is needed to properly turn on the CCI from the kernel by using the same code as during secondary boot. Let's provide a generic MCPM loopback function that can be invoked by backend initialization code to set things (CCI or similar) on the boot CPU just as it is done for the other CPUs. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-24 21:32:51 +04:00
BUG();
}
int __init mcpm_loopback(void (*cache_disable)(void))
{
int ret;
/*
* We're going to soft-restart the current CPU through the
* low-level MCPM code by leveraging the suspend/resume
* infrastructure. Let's play it safe by using cpu_pm_enter()
* in case the CPU init code path resets the VFP or similar.
*/
local_irq_disable();
local_fiq_disable();
ret = cpu_pm_enter();
if (!ret) {
ret = cpu_suspend((unsigned long)cache_disable, nocache_trampoline);
cpu_pm_exit();
}
local_fiq_enable();
local_irq_enable();
if (ret)
pr_err("%s returned %d\n", __func__, ret);
return ret;
}
#endif
ARM: mcpm: introduce helpers for platform coherency exit/setup This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-17 17:25:42 +04:00
extern unsigned long mcpm_power_up_setup_phys;
int __init mcpm_sync_init(
void (*power_up_setup)(unsigned int affinity_level))
{
unsigned int i, j, mpidr, this_cluster;
BUILD_BUG_ON(MCPM_SYNC_CLUSTER_SIZE * MAX_NR_CLUSTERS != sizeof mcpm_sync);
BUG_ON((unsigned long)&mcpm_sync & (__CACHE_WRITEBACK_GRANULE - 1));
/*
* Set initial CPU and cluster states.
* Only one cluster is assumed to be active at this point.
*/
for (i = 0; i < MAX_NR_CLUSTERS; i++) {
mcpm_sync.clusters[i].cluster = CLUSTER_DOWN;
mcpm_sync.clusters[i].inbound = INBOUND_NOT_COMING_UP;
for (j = 0; j < MAX_CPUS_PER_CLUSTER; j++)
mcpm_sync.clusters[i].cpus[j].cpu = CPU_DOWN;
}
mpidr = read_cpuid_mpidr();
this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
for_each_online_cpu(i) {
mcpm_cpu_use_count[this_cluster][i] = 1;
ARM: mcpm: introduce helpers for platform coherency exit/setup This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-17 17:25:42 +04:00
mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP;
ARM: MCPM: move the algorithmic complexity to the core code All backends are reimplementing a variation of the same CPU reference count handling. They are also responsible for driving the MCPM special low-level locking. This is needless duplication, involving algorithmic requirements that are not necessarily obvious to the uninitiated. And from past code review experience, those were all initially implemented badly. After 3 years, it is time to refactor as much common code to the core MCPM facility to make the backends as simple as possible. To avoid a flag day, the new scheme is introduced in parallel to the existing backend interface. When all backends are converted over, the compatibility interface could be removed. The new MCPM backend interface implements simpler methods addressing very platform specific tasks performed under lock protection while keeping the algorithmic complexity and race avoidance local to the core code. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-12 01:16:13 +03:00
}
ARM: mcpm: introduce helpers for platform coherency exit/setup This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-17 17:25:42 +04:00
mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP;
sync_cache_w(&mcpm_sync);
if (power_up_setup) {
ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-01-15 05:59:29 +03:00
mcpm_power_up_setup_phys = __pa_symbol(power_up_setup);
ARM: mcpm: introduce helpers for platform coherency exit/setup This provides helper methods to coordinate between CPUs coming down and CPUs going up, as well as documentation on the used algorithms, so that cluster teardown and setup operations are not done for a cluster simultaneously. For use in the power_down() implementation: * __mcpm_cpu_going_down(unsigned int cluster, unsigned int cpu) * __mcpm_outbound_enter_critical(unsigned int cluster) * __mcpm_outbound_leave_critical(unsigned int cluster) * __mcpm_cpu_down(unsigned int cluster, unsigned int cpu) The power_up_setup() helper should do platform-specific setup in preparation for turning the CPU on, such as invalidating local caches or entering coherency. It must be assembler for now, since it must run before the MMU can be switched on. It is passed the affinity level for which initialization should be performed. Because the mcpm_sync_struct content is looked-up and modified with the cache enabled or disabled depending on the code path, it is crucial to always ensure proper cache maintenance to update main memory right away. The sync_cache_*() helpers are used to that end. Also, in order to prevent a cached writer from interfering with an adjacent non-cached writer, we ensure each state variable is located to a separate cache line. Thanks to Nicolas Pitre and Achin Gupta for the help with this patch. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com>
2012-07-17 17:25:42 +04:00
sync_cache_w(&mcpm_power_up_setup_phys);
}
return 0;
}